Search

In this report, novel pH-sensitive interpenetrated network (IPN) polyspheres were developed utilizing polyacrylamide-g-locust bean gum (PAAm-g-LBG) in combination with sodium alginate (SA) to achieve intestinal targeted delivery of ketoprofen. PAAm-g-LBG was synthesized under microwave irradiation wherein ceric ammonium nitrate was used as reaction initiator and then conversion of PAAm-g-LBG as pH-sensitive copolymer was carried out by alkaline hydrolysis. The PAAm-g-LBG copolymer was characterized through 1 H-NMR, FTIR and elemental analysis. The IPN polyspheres exhibited pH-depended swelling or de-swelling with the alteration of surrounding pH. The in-vitro release of drug from IPN polyspheres was found to be higher (≈ 90%) in phosphate buffer of pH 7.4 in comparison with that in pH 1.2 buffer (10.6%). The in-vivo pharmacokinetic, anti-inflammatory screening and stomach histopathology studies performed on Wistar rats revealed pH sensitivity of IPN polyspheres where ketoprofen was successfully targeted to small intestine resulting in reduced side effects of ketoprofen like ulcer formation, erosion of gastric mucosa and hemorrhages., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work, the effect of hydrogelation period in the design of glipizide-loaded biopolymer-based interpenetrating network (IPN) beads was investigated. Carboxymethyl locust bean gum and sodium alginate IPN beads were prepared by ionic crosslinking method using aqueous aluminium chloride salt solution as gelation medium. The longer exposure of the IPN beads in the gelation medium caused a considerable loss of the drug (∼ 8%), and also affected their surface morphology and drug release performance. Spherical shape of the IPN beads was observed under scanning electron microscope (SEM). The diameter of IPN beads increased with increasing gelation time. The IPNs cured for 0.5h exhibited slower drug release kinetics in HCl (pH 1.2) and phosphate buffer (pH 7.4) solution than those incubated for 1-2h. The drug release occurred at a faster rate in phosphate buffer solution and continued for a minimum period of 8h. The IPNs cured for the lowest period obeyed polymer chain-relaxation phenomenon as dominating mechanism for drug release. However, all the IPNs followed anomalous mechanism of drug transport. The drug release corroborated well with pH-dependent swelling behaviors of the IPNs. Thus, IPN beads cured for 0.5h were found most suitable for controlled delivery of BCS class II anti-diabetic drug glipizide., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This article reports the development of pH-sensitive interpenetrating polymer network (IPN) microbeads using polyacrylamide-grafted-gum ghatti (PAAm-g-GG) and sodium alginate (SA) for gastro-protective controlled delivery of ketoprofen. We have synthesized PAAm-grafted-GG copolymer under microwave irradiation using cerric ammonium nitrate as reaction initiator; further, the PAAm-g-GG was converted to pH-sensitive copolymer through alkaline hydrolysis. Sophisticated instrumentation techniques were used to characterize PAAm-g-GG. The IPN microbeads of PAAm-g-GG and SA, pre-loaded with ketoprofen were prepared by dual crosslinking using Ca(2+) ions and glutaraldehyde (GA). The IPN microbeads demonstrated excellent pH-sensitive behavior as noted in the pulsatile swelling test and scanning electron microscopy. IPN microbeads also showed larger amount of drug release in buffer solution of pH 7.4 as compared to drug release in solution of pH 1.2. The in vivo pharmacokinetic, pharmacodynamic and stomach histopathology studies conducted on wistar rats confirmed the pH-sensitive controlled release of ketoprofen; IPN microbeads retarded the drug release in stomach resulting in reduced adverse effects of ketoprofen., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this study, xanthan gum-facilitated ethyl cellulose microsponges were prepared by the double emulsification technique and subsequently dispersed in a carbopol gel base for controlled delivery of diclofenac sodium to the skin. Scanning electron microscopy revealed the porous, spherical nature of the microsponges. Increase in the drug/polymer ratio (0.4:1, 0.6:1, 0.8:1, m/m) increased their yield (79.1-88.5%), drug entrapment efficiency (50.0-64.1%), and mean particle diameter (181-255 μm). Compared to the microsponges with high drug/polymer ratio (0.8:1, m/m), the flux of entrapped drug through excised rat skin decreased by 19.9% and 17.0%, respectively, for the microsponges prepared at low and intermediate drug/polymer ratios. When an equivalent amount of pure drug (not entrapped into microsponges) was dispersed into the gel base and the flux was compared, the microsponges (drug/polymer ratio 0.8:1, m/m) were found to reduce the flux by 33.3%. Whether the drug was dispersed either in un-entrapped or entrapped form into the gel base, the drug permeation through rat skin followed Higuchi's diffusion kinetic model. The microsponges prepared at the lowest drug/polymer ratio exhibited a comparatively slower drug permeation profile and were hence considered most suitable for controlled drug delivery application. FTIR spectroscopy and DSC analyses indicated the chemically stable, amorphous nature of the drug in these microsponges. The gel containing these optimized microsponges was comparable to that of a commercial gel formulation and did not show serious dermal reactions. Hence, the microsponge system obtained at the lowest drug/polymer ratio could be useful for controlled release of diclofenac sodium to the skin.

Local antimicrobial delivery is a potential area of research conceptualized to provide alternative and better methods of treatment for cases, as osteomyelitis where avascular zones prevent the delivery of drugs from conventional routes of administration. Drug-loaded polymers and calcium phosphates as hydroxyapatites have been tried earlier. Bioactive glasses are bone-filling materials used for space management in orthopedic and dental surgery. A new bioactive glass (SSS2) was synthesized and fabricated into porous scaffold with a view to provide prolonged local delivery of gatifloxacin and fluconazole as suitable for the treatment of osteomyelitis. The new SSS2 was characterized by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses. In addition, the bioactivity of the SSS2 glass and resulting scaffold was examined by in vitro acellular method and ascertained by FTIR and XRD. The pore size distribution was analysed by mercury intrusion porosimetry and the release of drugs from scaffolds were studied in vitro. The glass and the resulting scaffolds were bioactive indicating that they can bond with bone in vivo. The scaffolds were porous with pores predominantly in the range of 10-60 µm, released the drugs effectively for 6 weeks and deemed suitable for local delivery of drugs to treat osteomyelitis.

A new bioactive glass-based scaffold was developed for local delivery of drugs in case of osteomyelitis. Bioactive glass having a new composition was prepared and converted into porous scaffold. The bioactivity of the resulting scaffold was examined by in vitro acellular method. The scaffolds were loaded with two different drugs, an antibacterial or antifungal drug. The effects of the size of the scaffold, drug concentration, and dissolution medium on drug release were studied. The scaffolds were further coated with a degradable natural polymer, chitosan, to further control the drug release. Both the glass and scaffold were bioactive. The scaffolds released both the drugs for 6 weeks, in vitro. The results indicated that the bigger the size and the higher the drug concentration, the better was the release profile. The scaffolds appeared to be suitable for local delivery of the drugs in cases of osteomyelitis.

In this study, carboxymethyl derivative of locust bean gum was prepared, characterized, and its gelling ability with different concentrations (1-5% w/v) of aluminum chloride (AlCl(3)) was utilized for the development of glipizide-loaded beads in a completely aqueous environment. The beads were spherical when observed under a scanning electron microscope. Increase in gelling ion concentration decreased the drug entrapment efficiency from 97.68% to 95.14%. The beads swelled more slowly in pH 1.2 KCl-HCl buffer and exhibited a slower drug release pattern than that observed in pH 7.4 phosphate buffer. Irrespective of the dissolution media, the drug release became slower at higher AlCl(3) concentration. The drug release in alkaline medium was found to be controlled by a combination of diffusion as well as polymer relaxation phenomena. Comparing the release profiles, it was observed that the beads treated with 5% AlCl(3) provided slower drug release up to 10 h in alkaline medium without any sign of disintegration and, thus, this formulation was selected for further studies. Fourier transform infrared (FTIR) spectroscopy indicated the stable nature of the drug in the beads. Differential scanning calorimetry and X-ray diffraction analysis showed that most of the drug remained in amorphous state in the beads. Stability study indicated no statistical significant difference in drug entrapment efficiency of the beads. In vivo activity of the beads was tested and a prolonged hypoglycemic effect was achieved. Hence, carboxymethyl locust bean beads could be a potential carrier for controlled oral delivery of glipizide.

This review paper attempts to provide an overview in the fabrication and application of organic-inorganic based composites in the field of local drug delivery for bone. The concept of local drug delivery exists for a few decades. However, local drug delivery in bone and specially application of composites for delivery of drugs to bone is an area for potential research interest in the recent time. The advantages attained by an organic-inorganic composite when compared to its individual components include their ability to release drug, adopting to the natural environment and supporting local area until complete bone regeneration, which make them carriers of interest for local drug delivery for bone.

A pH-sensitive graft co-polymer of polyacrylamide (PAAm) and sodium alginate (SA) was synthesized by free radical polymerization under a nitrogen atmosphere followed by alkaline hydrolysis. The co-polymer was characterized by Fourier transform infrared (FT-IR) spectroscopy, elemental analysis and thermogravimetric analysis (TGA). Ketoprofen-loaded graft co-polymer beads were prepared by ionotropic gelation/covalent cross-linking. The beads were characterized by swelling studies, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). A pulsatile swelling study indicated that the co-polymer exhibits considerable pH-sensitive behavior. Release of ketoprofen was significantly increased when the pH of the medium was changed from acidic to alkaline. Stomach histopathology of albino rats indicated that the beads were able to retard the release of the drug in the stomach, and gastric side-effects like ulceration, hemorrhage and erosion of gastric mucosa were diminished when the drug was entrapped into PAAm-g-SA-based pH-sensitive hydrogel beads.

Novel pH-sensitive interpenetrating network hydrogel beads of polyacrylamide-grafted-xanthan (PAAm-g-XG) and sodium carboxymethyl cellulose (NaCMC) loaded with ketoprofen were prepared and evaluated for pH sensitivity and drug release characteristics. The pH-sensitive PAAm-g-XG copolymer was synthesized by free radical polymerization under the nitrogen atmosphere followed by alkaline hydrolysis. The grafting and alkaline hydrolysis reactions were confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and X-ray diffraction studies were carried out to know the crystalline nature of encapsulated drug. Scanning electron microscopic study revealed that the interpenetrating polymer network (IPN) beads possess porous matrix structure in alkaline pH whereas nonporous matrix structure was observed in acidic pH. The swelling of the beads and drug release was significantly increased when pH of the medium was changed from acidic to alkaline. The results of pulsatile swelling study indicated that the IPN beads changed their swelling behavior when pH of the external medium was altered. As pH of the medium was changed from 1.2 to 7.4, a considerable increase in swelling was observed for all the beads. However, swelling process was slower than the deswelling. At higher pH values, the carboxyl functional groups of hydrogels undergo ionization and the osmotic pressure inside the beads increases resulting in higher swelling. Drug release followed case II transport mechanism in acidic medium whereas anomalous/non-Fickian transport mechanism was observed in alkaline medium.

Novel pH-sensitive hydrogel beads were prepared using a hydrolyzed poly(acrylamide-g-xanthan) (PAAm-g-XG) copolymer from a complete aqueous environment and evaluated for targeting ketoprofen to the intestine. The PAAm-g-XG copolymer was synthesized by free radical polymerization under the nitrogen atmosphere followed by alkaline hydrolysis. The copolymer was characterized by FTIR spectroscopy, (1)H NMR spectroscopy, elemental analysis and thermogravimetric analysis. Pulsatile swelling study indicated that the copolymer exhibits considerable pH-sensitive behavior unlike pristine xanthan gum. Ketoprofen-loaded pH-sensitive beads were prepared by ionotropic gelation with Al(3 + ) ions. Release of drug from all the copolymeric beads was much lesser than that from pristine xanthan beads. Moreover, a maximum of 20% ketoprofen was released from the copolymeric beads in pH 1.2-5.5 during a period of 3 h, while a major portion of the drug was released in pH 6.8-7.4 gradually over a longer period. Pharmacodynamic activity and stomach histopathology of albino rats indicated that the beads were able to retard the drug release in stomach, and gastric side effects such as ulceration, hemorrhage and erosion of gastric mucosa were diminished when the drug was entrapped into PAAm-g-XG-based pH-sensitive beads.

Propranolol-HCl-loaded calcium alginate (ALG) beads, propranolol-resin complex (resinate)-loaded calcium alginate (RALG) beads and polyethyleneimine (PEI)-treated RALG (RALG-PEI) beads were prepared by ionotropic gelation/polyelectrolyte complexation method. The beads were evaluated and compared in respect of drug entrapment efficiency (DEE) and release characteristics in simulated gastric fluid (SGF, 0.1(N) HCl, pH 1.2) and simulated intestinal fluid (SIF, phosphate buffer, pH 6.8). DEE of RALG beads was considerably higher than that of ALG beads containing unresinated drug. However, DEE of RALG beads decreased with increase in both gelation time and concentration of the gel forming Ca2+ ions due to drug displacement from resinate. PEI treatment of RALG beads further decreased DEE as the polycation also displaced the drug from the resinate. The release of drug from all the beads was slow and incomplete in SGF owing to considerably less swelling of the beads and the decrease in drug release from the beads followed the order: RALG-PEI

Aceclofenac, a non-steroidal antiinflammatory drug, is used for posttraumatic pain and rheumatoid arthritis. Aceclofenac fast-dispersible tablets have been prepared by direct compression method. Effect of superdisintegrants (such as, croscarmellose sodium, sodium starch glycolate and crospovidone) on wetting time, disintegration time, drug content, in vitro release and stability parameters has been studied. Disintegration time and dissolution parameters (t50% and t80%) decreased with increase in the level of croscarmellose sodium. Where as, disintegration time and dissolution parameters increased with increase in the level of sodium starch glycolate in tablets. However, the disintegration time values did not reflect in the dissolution parameter values of crospovidone tablets and release was dependent on the aggregate size in the dissolution medium. Stability studies indicated that tablets containing superdisintegrants were sensitive to high humidity conditions. It is concluded that fast-dispersible aceclofenac tablets could be prepared by direct compression using superdisintegrants. [ABSTRACT FROM AUTHOR]