Search

Development of curcumin-loaded mixed polymeric micelles based on chitosan, alginate, maltodextrin, pluronic F127, pluronic P123, and tween 80, by thin-film hydration method has been investigated in Bisphenol A induced diabetics rats. Curcumin (C 21 H 20 O 6 ) extracted from rhizomes of the "Curcuma longa" has attracted considerable attention of pharmaceutical researchers due to its low cost, excellent pharmacological activities and lesser side effects. Despite its diverse pharmacological properties, the therapeutic application of curcumin as an oral therapy has been limited due to its poor aqueous solubility, fixed chemical stability, and low bioavailability. In an attempt to overcome these limitations, we developed curcumin-loaded mixed polymeric micelles. Diabetes mellitus is a most common chronic carbohydrate metabolic disorder. The results clearly demonstrated the ability of developed formulation to reduce the elevated blood glucose level and lipid profile (total cholesterol, triglycerides). It maintained the body-weight, HDL cholesterol level, various biochemical parameters and accelerated the wound healing process when treated with these curcumin-based formulations. The treatment of curcumin loaded mixed polymeric formulations allowed a favorable inhibitory effect to these histopathological changes of liver, kidney, and pancreas. The newly developed curcumin-based formulations have proved superior therapeutic potential and excellent healing efficacy as compared to standard drugs and pure curcumin., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Our current research work comprised of synthesis of a series of novel chitosan based water dispersible polyurethanes. The synthesis was carried out in three steps, in first step, the NCO end capped PU-prepolymer was formed through the reaction between Polyethylene glycol (PEG) (Mn = 600), Dimethylolpropionic acid (DMPA) and Isophorone diisocyanate (IPDI). In second step, the neutralization step was carried out by using Triethylamine (TEA) which resulted the formation of neutralized NCO terminated PU-prepolymer, after that the last step chain extension was performed by the addition of chitosan and followed the formation of dispersion by adding calculated amount of water. The proposed structure of CS-WDPUs was confirmed by using FTIR technique. The antimicrobial activities of the plain weave poly-cotton printed and dyed textile swatches after application of CS-WDPUs were also evaluated. The results showed that the chitosan incorporation in to PU backbone has markedly enhanced the antibacterial activity of WDPUs. These synthesized CS-WDPUs are eco-friendly antimicrobial finishes (using natural bioactive agents such as chitosan) with potential applications on polyester/cotton textiles., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A series of aqueous dispersions of polyurethane (PU) and low molecular weight chitosan (CS (LMW) ) has been prepared in two steps synthetic process. In first step PU prepolymer, with NCO termini were prepared by reacting isophrone diisocyanate (IPDI), poly (caprolactone) diol (CAPA, Mn 1000), and 2,2-dimethylol propionic acid (DMPA), followed by neutralization of PU prepolymer with triethylamine (TEA). In second step PU prepolymer chain was extended by low molecular weight chitosan followed by dispersion formation by adding calculated volume of water. Molecular characterization of CS (LMW) -PU finishes was done by FTIR and application on poly-cotton blended fabric samples was confirmed by scanning electron microscopy (SEM). Antimicrobial and UV protective performance of treated fabrics was performed by AATCC 100 and AATCC TM183 methods respectively. Furthermore, it shows that the addition of chitosan remarkably increases antimicrobial and UV protective properties of PUs., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A series of polyurethane dispersions were synthesized through two step polymerization technique. A PU prepolymer with NCO termini was prepared using isophorone diisocyanate (IPDI), poly caprolactone diols (CAPA of mol. wt. 1000) and DMPA (3:1:1), and PU prepolymer chain was extended with different mole ratios of low molecular weight chitosan and finally aqueous emulsion was prepared by adding suitable volume of water. The proposed structure of chitosan based PU dispersions was confirmed through FTIR spectroscopy. The prepared aqueous CS (LMW) -CPUIs emulsions were applied onto the different quality plain weave poly-cotton dyed and printed fabric pieces using pad-dry-cure procedures. The physical properties such as air permeability, stiffness and crease recovery angle (CRA), pilling resistance, tear and tensile strength of the treated and untreated fabric samples were also evaluated. The results revealed that the incorporation of chitosan has pronounced effect on the properties of treated fabrics. This research could be extended in future for performance evaluation of pure cotton and woolen fabrics., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this work, new hexamethylene diisocyanate (HMDI) and hyroxylterminated polybutadiene (HTPB) based polyurethanes (PUs) were prepared following step growth polymerization by the introduction of varying mole ratio of chitosan (CH) and curcumin (CUR). Structural study of blends through infrared spectroscopy confirmed the incorporation of CH and CUR into the backbone of the PU. The scanning electron microscopic (SEM) study confirmed the well dispersion of incorporated chitosan/curcumin and homogeneity of surface of synthesized samples. Thermogravimetric analysis (TGA) of PU blends indicated a better thermal stability with 0.25M:0.75M of chitosan to curcumin. Mechanical properties such as modulus and tensile strength of PU blends were found to be better with higher contents of chitosan and curcumin. The same extender composition (1mol BDO, 075mol chitosan and 0.25mol curcumin) based PU showed higher substantial of antimicrobial activity as compared to the all other PUs. On the whole, this work is actually a step towards the generation of novel biocompatible materials preferably useful for biomedical applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Chitin and chitosan are amino polysaccharides having multidimensional properties, such as biocompatibility, biodegradability, antibacterial properties and non-toxicity, muco-adhesivity, adsorption properties, etc., and thus they can be widely used in variety of areas. Although human history mainly relies on the biopolymers, however synthetic materials like polyvinyl alcohol (PVA) have good mechanical, chemical and physical properties. Functionalization of PVA with chitin and chitosan is considered very appropriate for the development of well-designed biomaterials such as biodegradable films, for membrane separation, for tissue engineering, for food packaging, for wound healing and dressing, hydro gels formation, gels formation, etc. Considering versatile properties of the chitin and chitosan, and wide industrial and biomedical applications of PVA, this review sheds a light on chitin and chitosan based PVA materials with their potential applications especially focusing the bio-medical field. All the technical scientific issues have been addressed highlighting the recent advancement., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Chitin and chitosan are amino polysaccharides having massive structural propensities to produce bioactive materials with innovative properties, functions and diverse applications particularly in biomedical field. The specific physico-chemical, mechanical, biological and degradation properties offer efficient way to blend these biopolymers with synthetic ones. Polyurethane (PU) gained substantial attention owing to its structure-properties relationship. The immense activities of chitin/chitosan are successfully utilized to enhance the bioactive properties of polyurethanes. This review shed a light on chitin and chitosan based PU materials with their potential applications especially focusing the bio-medical field. All the technical scientific issues have been addressed highlighting the recent advancement in the biomedical field., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The present research work was performed to synthesize a new series of chitosan based polyurethane elastomers (PUEs) using poly(ɛ-caprolactone) (PCL). The chitosan based PUEs were prepared by step-growth polymerization technique using poly(ɛ-caprolactone) (PCL) and 2,4-toluene diisocyanate (TDI). In the second step the PU prepolymer was extended with different mole ratios of chitosan and 1,4-butane diol (BDO). Molecular engineering was carried out during the synthesis. The conventional spectroscopic characterization of the synthesized samples using FT-IR confirms the existence of the proposed chitosan based PUEs structure. Internal morphology of the prepared PUEs was studied using SEM analysis. The SEM images confirmed the incorporation of chitosan molecules into the PU backbone., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Graphical abstract Highlights • A series of chitosan-based waterborne polyurethane (CS-WPU) emulsions were synthesized. • The chain extension step was done by using different mole ratios of chitosan. • The CS-WPU emulsion was applied on plain weave poly-cotton dyed and printed fabrics by using pad-dry-cure techniques. • Incorporation of chitosan affects the tear strength and antimicrobial activity of poly-cotton dyed and printed fabrics. Abstract Chitosan has gained an increased interest of researchers due to its nontoxic, biodegradable, biocompatible and renewable properties as well as its antimicrobial activity. In this work, a series of chitosan-based waterborne polyurethane (CS-WPU) emulsions were synthesized. The synthesis was accomplished by using a two-step emulsion polymerization process. The pre-polymer was prepared using hexamethylene diisocyanate (HDI) and polyethylene glycol (PEG; MW = 6 kDa). Afterwards, the chain extension step was performed by using different mole ratios of chitosan. Moreover, the effect of chitosan on physicochemical properties of the emulsion was studied. To evaluate textile performances such as tear strength, tensile strength and pilling, the CS-WPU emulsion was applied on different plain weave polyester cotton dyed and printed fabrics by using pad-dry cure techniques. The antimicrobial activity of the treated and untreated fabrics was also evaluated via the agar diffusion method. The results displayed that incorporation of chitosan has prominent effects on tensile tear strength, tear strength and antimicrobial activity of polyester cotton dyed and printed fabrics. Moreover, antimicrobial activity was considerably enhanced as the mole ratio of the chitosan was increased. The results emphasize that CS-WPU based on HDI exhibits a better performance as compared to IPDI. [ABSTRACT FROM AUTHOR]