Search

Atomically-dispersed metal catalysts (ADMCs) on surfaces have demonstrated high activity and selectivity in many catalytic reactions. However, dispersing and stabilising individual atoms in support materials in an atom/energy-efficient scalable way still presents a significant challenge. Currently, the synthesis of ADMCs involves many steps and further filtration procedures, creating a substantial hurdle to their production at industrial scale. In this work, we develop a new pathway for producing ADMCs in which Pt atoms are stabilised in the nitrogen-interstices of a graphitic carbon nitride (g-C3N4) framework using scalable, solvent-free, one-pot magnetron sputtering deposition. Our approach has the highest reported rate of ADMC production of 4.8 mg h-1 and generates no chemical waste. Deposition of only 0.5 weight percent of Pt onto g-C3N4 led to improved hydrogen production by factor of ca. 3333 ± 450 when compared to bare g-C3N4. PL analysis showed that the deposition of Pt atoms onto g-C3N4 suppressed the charge carrier recombination from the photogenerated electron-hole pairs of Pt/g-C3N4 thereby enhance hydrogen evolution. Scanning transmission electron microscope imaging before and after the hydrogen evolution reaction revealed that the Pt atoms stabilised in g-C3N4 have a high stability, with no agglomeration observed. Herein, it is shown that this scalable and clean approach can produce effective ADMCs with no further synthetic steps required, and that they can be readily used for catalytic reactions.

Supported bimetallic nanoparticles (BNPs) are promising catalysts, but study on their compositional and structural changes under reaction conditions remains a challenge. In this work, the structure of PtNi BNPs supported on UiO-67 metal–organic framework (MOF) catalyst (i.e., PtNi@UiO-67) was investigated by in situ by near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS). The results showed differences in the reduction behaviour of Ni species in PtNi BNPs and monometallic Ni supported on UiO-67 catalysts (i.e., PtNi@UiO-67 and Ni@UiO-67), suggesting charge transfer between metallic Pt and Ni oxides in PtNi@UiO-67. Under CO oxidation conditions, Ni oxides segregated to the outer surface of the BNPs forming a thin layer of NiOx on top of the metallic Pt (i.e., a NiOx-on-Pt structure). This resulted in a core-shell structure which was confirmed by high-resolution scanning transmission electron microscopy (HR-STEM). Accordingly, the layer of NiOx on PtNi BNPs, which is stabilised by charge transfer from metallic Pt, was proposed as the possible active phase for CO oxidation, being responsible for the enhanced catalytic activity observed in the bimetallic PtNi@UiO-67 catalyst.

The general and cost-effective synthesis of single atom electrocatalysts (SAECs) still remains a great challenge. Herein, we report a general synthetic protocol for the synthesis of SAECs via a simple condensation–carbonization process, in which furfural and cyanamide were condensation polymerized in the presence of polystyrene nanospheres and metal ions, followed by a pyrolysis to N-doped carbon nanosheet (NCNS) supported SAECs. Six types of SAECs containing platinum, palladium, gold, nickel, cobalt and iron were synthesized to demonstrate the generality of the synthesis protocol. This methodology affords a facile solution to the trade-off between support conductivity and metal loading of SAECs by optimizing the ratio of carbon/nitrogen precursors, i.e., furfural and cyanamide. The presence of single metal atoms was confirmed by high-angle annular dark field scanning transmission electron microscopy and X-ray absorption fine structure measurements. The three-dimensional distribution of single platinum atoms was vividly revealed by depth profile analysis using a scanning transmission electron microscope. The resulting SAECs showed excellent performance for glycerol electro-oxidation and water splitting in alkaline solutions. Notably, Pt/NCNSs possessed an unprecedent mass-normalized current density of 5.3 A per milligram of platinum, which is 32 times that of the commercial Pt/C catalyst. Density functional theory calculations were conducted to reveal the adsorption behavior of glycerol over the SAECs. Using Ni/NCNSs and Co/NCNSs as anodic and cathodic electrocatalysts, we constructed a solar panel powered electrolytic cell for overall water splitting, leading to an overall energy efficiency of 8.8%, which is among the largest solar-to-hydrogen conversion efficiencies reported in the literature.

Precisely tuning an organic semiconductor’s crystalline order allows exciton transport to proceed 2-3 orders of magnitude faster., Efficient energy transport is desirable in organic semiconductor (OSC) devices. However, photogenerated excitons in OSC films mostly occupy highly localized states, limiting exciton diffusion coefficients to below ~10−2 cm2/s and diffusion lengths below ~50 nm. We use ultrafast optical microscopy and nonadiabatic molecular dynamics simulations to study well-ordered poly(3-hexylthiophene) nanofiber films prepared using living crystallization-driven self-assembly, and reveal a highly efficient energy transport regime: transient exciton delocalization, where energy exchange with vibrational modes allows excitons to temporarily re-access spatially extended states under equilibrium conditions. We show that this enables exciton diffusion constants up to 1.1 ± 0.1 cm2/s and diffusion lengths of 300 ± 50 nm. Our results reveal the dynamic interplay between localized and delocalized exciton configurations at equilibrium conditions, calling for a re-evaluation of exciton dynamics and suggesting design rules to engineer efficient energy transport in OSC device architectures not based on restrictive bulk heterojunctions.

A rapidly-growing 3D printing technology is innovatively employed for the manufacture of a new class of heterogenous catalysts for the conversion of CO2 into industrially relevant chemicals such as cyclic carbonates. For the first time, directly printed graphene-based 3D structured nanocatalysts have been developed combining the exceptional properties of graphene and active CeZrLa mixed-oxide nanoparticles. It constitutes a significant advance on previous attempts at 3D printing graphene inks in that it does not merely explore the printability itself, but enhances the efficiency of industrially relevant reactions, such as CO2 utilisation for direct propylene carbonate (PC) production in the absence of organic solvents. In comparison to the starting powder, 3D printed GO-supported CeZeLa catalysts showed improved activity with higher conversion and no noticeable change in selectivity. This can be attributed to the spatially uniform distribution of nanoparticles over the 2D and 3D surfaces, and the larger surface area and pore volume of the printed structures. 3D printed GO-supported CeZeLa catalysts compared to unsupported 3D printed samples exhibited higher selectivity and yield owing to the great number of new weak acid sites appearing in the supported sample, as observed by NH3-TPD analysis. In addition, the catalyst's facile separation from the product has the capacity to massively reduce materials and operating costs resulting in increased sustainability. It convincingly shows the potential of these printing technologies in revolutionising the way catalysts and catalytic reactors are designed in the general quest for clean technologies and greener chemistry.

We report a rapid solution-phase strategy to synthesize alloyed PtNi nanoparticles which demonstrate outstanding functionality for the oxygen reduction reaction (ORR). This one-pot co-reduction colloidal synthesis results in a monodisperse population of single-crystal nanoparticles of rhombic dodecahedral morphology, with Pt enriched edges and compositions close to Pt1Ni2. We use nanoscale 3D compositional analysis to reveal for the first time that oleylamine (OAm)-aging of the rhombic dodecahedral Pt1Ni2 particles results in Ni leaching from surface facets, producing aged particles with concave faceting, an exceptionally high surface area and a composition of Pt2Ni1. We show that the modified atomic nanostructures catalytically outperform the original PtNi rhombic dodecahedral particles by more than 2-fold and also yield improved cycling durability. Their functionality for the ORR far exceeds commercially available Pt/C nanoparticle electrocatalysts, both in terms of mass-specific activities (up to a 25-fold increase) and intrinsic area-specific activities (up to a 27-fold increase)., Comment: 14 pages, 4 figures, supplementary information

The oxidation of cyclohexane via the in-situ production of H2O2 from molecular H2 and O2 offers an attractive route to the current industrial means of producing cyclohexanone and cyclohexanol (KA oil), key materials in the production of Nylon. The in-situ route has the potential to overcome the significant economic and environmental concerns associated with the use of commercial H2O2, while also allowing for the use of far lower reaction temperatures than those typical of the purely aerobic route to KA oil. Herein we demonstrate the efficacy of a series of bi-functional Pd-based catalysts, which offer appreciable concentrations of KA oil, under conditions where limited activity is observed using O2 alone. In particular the introduction of V into a supported Pd catalyst is seen to improve KA oil concentration by an order of magnitude, compared to the Pd-only analogue. In particular we ascribe this improvement in catalytic performance to the development of Pd domains of mixed oxidation state upon V incorporation as evidenced through X-ray photoelectron spectroscopy. Graphic Abstract

State of the art electrocatalysts for the hydrogen evolution reaction (HER) are based on metal nanoparticles (NPs). It has been shown that the localized surface plasmon resonance (LSPR) excitation in plasmonic NPs can be harvested to accelerate a variety of molecular transformations. This enables the utilization of visible light as an energy input to enhance HER performances. However, most metals that are active toward the HER do not support LSPR excitation in the visible or near-IR ranges. We describe herein the synthesis of gold-rhodium core-shell nanoflowers (Au@Rh NFs) that are composed of a core made up of spherical Au NPs and shells containing Rh branches. The Au@Rh NFs were employed as a model system to probe how the LSPR excitation from Au NPs can lead to an enhancement in the HER performance for Rh. Our data demonstrate that the LSPR excitation at 533 nm (and 405 nm) leads to an improvement in the HER performance of Rh, which depends on the morphological features of the Au Rh NFs, offering opportunities for optimization of the catalytic performance. Control experiments indicate that this improvement originates from the stronger interaction of Au@Rh NFs with H2O molecules at the surface, leading to an icelike configuration, which facilitated the HER under LSPR excitation.

Herein, we report a facile route to synthesize isolated single iron atoms on nitrogen-sulfur-codoped carbon matrix via a direct pyrolysis process in which hemoglobin, a by-product of the meat industry, was utilized as a precursor for iron, nitrogen and sulfur while bamboo-shaped carbon nanotubes served as a support owing to their excellent conductivity and numerous defects. The resulting metal-nitrogen complexed carbon showed outstanding catalytic performance for the oxygen evolution reaction (OER) in alkaline solutions. At an overpotential of 380 mV, the optimal sample yielded a current density of 83.6 mA cm−2, which is 2.5 times that of benchmark IrO2 (32.8 mA cm−2), rendering it as one of the best OER catalysts reported so far. It also showed negligible activity decay in alkaline solutions during long-term durability tests. Control experiments and X-ray absorption fine structure analyses revealed that Fe-Nx species in the samples are the active sites for OER. Further density functional theory calculations indicated that the presence of sulfur in the carbon matrix modified the electronic structures of active species, thereby leading to the superior activity of the sample.

Activity of catalysts increase linearly with increasing ratio of Pd/Pt bimetallic to oxide species as observed in XRD. Bimetallic catalysts consisting of Pd and Pt on TiO 2 -zeolite (mordenite, beta, ZSM-5) supports were prepared and tested for the combustion of methane. The activity of the catalysts was found to be dependent on the zeolite topology and SiO 2 : Al 2 O 3 ratio and was linearly dependent on the proportion of Pd and Pt present in a bimetallic phase observed in XRD diffractograms of the catalysts. This linear dependence was valid for a range of zeolites used. STEM-EDS and electron tomography showed the Pd and Pt to be largely co-located and XAS and XPS indicated that the metals are mostly present in the form of oxide nanoparticles with a minor contribution from the metals at high SiO 2 : Al 2 O 3 ratios. Catalyst characterization showed there to be little difference overall in the metal loading and physical characteristics of the samples and NH 3 -TPD suggested that the activation of methane over acid sites is not important. Adding water to the feed, slightly reduced the conversion but did not affect the deactivation profile of the catalysts tested.

We have explored the synthesis of Au@HgxCd1-xTe core@shell nanorods by sequential aqueous cation exchange (ACE) for near-infrared photodetector application. A number of related Au@telluride core/shell nanorod structures were put forwarded, taking advantage of multi-step transformations through a binary and then a ternary phase for the telluride shells. The latter have a high degree of crystallinity thanks to the step-wise ACE method. The use of only trace amounts of Cd2+ coordinated with tri-n-butylphosphine, assisted the phase transformation from an amorphous Ag2Te shell to a highly crystalline Ag3AuTe2 shell in the first stage; this was followed by a further cation exchange (CE) step with far higher Cd2+ levels to fabricate a highly crystalline CdTe shell, and with an additional CE with Hg2+ to convert it to a HgxCd1-xTe shell. The composition of the shell components and the well-controlled thickness of the shells enabled tunable surface plasmon resonance properties of the Au@telluride nanorods in the NIR region. Utilizing the enhanced NIR absorption, a hybrid photodetector structure of Au@HgxCd1-xTe nanorods on graphene was fabricated, showing visible to NIR (vis-NIR) broadband detection with high photoresponsivity (~106 A/W).

The permeation characteristics of palladium pore filled (PF) membranes have been investigated with gas permeation and structural characterization of the membranes. PF membranes have been prepared by filling with Pd the nanoporous γ-Al2O3/YSZ (or pure YSZ) layer supported onto porous α-Al2O3 and ZrO2. The number of nanoporous layers and the applied vacuum level during the electroless plating process have been studied. Gas permeation properties of the PF membranes have been determined in a temperature range of 300-550 °C. The measured hydrogen permeances have been found to be lower than previously reported for similar membranes. It has been found that the hydrogen fluxes do not depend on the thickness of the nanoporous layers (γ-Al2O3/YSZ or pure YSZ) or on the vacuum pump employed for filling with Pd. The physicochemical characterization performed showed that the palladium deposited does not form a percolated network across the mesoporous layer(s), leading to low hydrogen permeances and thus low H2/N2 perm-selectivities. The presented work is funded within FERRET project as part of European Union’s Seventh Framework Programme (FP7/2007-2013) for the Fuel Cells and Hydrogen Joint Technology Initiative under grant agreement n° 621181. The Talos TEM was funded as part of HEFCE funding in the UK Research Partnership Investment Funding (UKRPIF) Manchester RPIF Round 2.

Two novel automated methods for the determination of surface roughness and chemical distribution in individual nanoparticles are presented and applied to nanoparticles synthesised by the galvanic replacement reaction. The two methodologies apply the determination of circumferential and radial line profiles to determine surface roughness and elemental distribution respectively. The surface roughness analysis provides details on localised changes in roughness in comparison to single measures of circularity. The X-ray spectroscopic concentric ring scan outperforms conventional line scans when elemental distribution approximately possesses a spherical symmetry.

Coccolithophores create an intricate exoskeleton from nanoscale calcite platelets. Shape, size, and crystal orientation are controlled to a remarkable degree. In this study, the structure of Rhabdosphaera clavigera is described in detail for the first time through a combination of electron microscopy techniques, including three-dimensional electron tomography. The coccolithophore exhibits several micrometer long 5-fold symmetric spines with diameters of approximately 0.5 μm. The nanorystals constituting the spine are arranged radially along the longitudinal axis, protruding from the almost flat disks that form the coccosphere. The stem of the spine is shown to consist of {104} calcite rhombohedra single crystalline platelets, arranged in five separate spiral “staircases”. The spine tip shows 15 structural elements: five large “panels” protruding outward along the lateral plane and five leaf-shaped smaller units which form the topmost steps of the staircases. The outer tip consists of five long thin platel...

New AgAu tadpole nanocrystals were synthesized in a one-step reaction involving simultaneous galvanic replacement between Ag nanospheres and AuCl4(-)(aq.) and AuCl4(-)(aq.) reduction to Au in the presence of citrate. The AgAu tadpoles display nodular polycrystalline hollow heads, while their undulating tails are single crystals. The unusual morphology suggests an oriented attachment growth mechanism. Remarkably, a 1 nm thick Ag layer was found to segregate so as to cover the entire surface of the tadpoles. By varying the nature of the seeds (Au NPs), double-headed Au tadpoles could also be obtained. The effect of a number of reaction parameters on product morphology were explored, leading to new insights into the growth mechanisms and surface segregation behavior involved in the synthesis of bimetallic and anisotropic nanomaterials.

In this work, a simple but powerful method for controlling the size and surface morphology of AgAu nanodendrites is presented. Control of the number of Ag nanoparticle seeds is found to provide a fast and effective route by which to manipulate the size and morphology of nanoparticles produced via a combined galvanic replacement and reduction reaction. A lower number of Ag nanoparticle seeds leads to larger nanodendrites with the particles' outer diameter being tunable in the range of 45-148 nm. The size and surface morphology of the nanodendrites was found to directly affect their catalytic activity. Specifically, we report on the activity of these AgAu nanodendrites in catalyzing the gas-phase oxidation of benzene, toluene and o-xylene, which is an important reaction for the removal of these toxic compounds from fuels and for environmental remediation. All produced nanodendrite particles were found to be catalytically active, even at low temperatures and low metal loadings. Surprisingly, the largest nanodendrites provided the greatest percent conversion efficiencies.