Search

Organic-inorganic hybrid materials overcome drawbacks associated with alginate hydrogels. In this work, covalently coupled silica-alginate hybrids were prepared by Schiff base formation and sol-gel reaction using alginate dialdehyde (ADA), (3- Aminopropyl) triethoxysilane (APTES), and APTES/tetraethylorthosilicate (TEOS) precursors. The influence of the polysaccharide/inorganic ratio, the nature of the inorganic precursor and the ionic crosslinking ability are studied. Prepared hybrids were characterized by FT-IR, 13C and 29Si -NMR spectroscopies, SEM, and rheology. For ADA/APTES hybrids, at higher ADA content, Schiff base formation is predominant, but at lower ADA content, the sol-gel reaction is prevalent. However, the progress of the sol-gel reactions for ADA/(APTES+TEOS), is favored with higher ADA compositions. Introducing a posterior ionic crosslinking treatment was possible, increasing the moduli in ADA/(APTES+TEOS) hybrids from 86207Pa for 1.5 ADA/Si to 362171Pa for 1.5 ADA/Si-Ca. In-situ ADA-Silica hybrid hydrogels containing both ionic and covalent crosslinking can be successfully synthesized with the proposed method., Instituto Politécnico Nacional, México (IPN-SIP 20196660 and IPN-SIP 20201294), AEI/FEDER,UE (DPI2017-90147-R), CONACYT scholarship.

The search of suitable combinations of stem cells, biomaterials and scaffolds manufacturing methods have become a major focus of research for bone engineering. The aim of this study was to test the potential of dental pulp stem cells to attach, proliferate, mineralize and differentiate on 3D printed polycaprolactone (PCL) scaffolds. A 100% pure Mw: 84,500 +- 1000 PCL was selected. 5 x 10 x 5 mm3 parallelepiped scaffolds were designed as a wood-pilled structure composed of 20 layers of 250 microm in height, in a non-alternate order ([0,0,0,90,90,90º]). 3D printing was made at 170 ºC. Swine dental pulp stem cells (DPSCs) were extracted from lower lateral incisors of swine and cultivated until the cells reached 80% confluence. The third passage was used for seeding on the scaffolds. Phenotype of cells was determined by flow Cytometry. Live and dead, Alamar blue™, von Kossa and alizarin red staining assays were performed. Scaffolds with 290 + 30 micron strand diameter, 938 x 80 micron pores in the axial direction and 689 x 13 micron pores in the lateral direction were manufactured. Together, cell viability tests, von Kossa and Alizarin red staining indicate the ability of the printed scaffolds to support DPSCs attachment, proliferation and enable differentiation followed by mineralization. The selected material-processing technique-cell line (PCL-3D printing-DPSCs) triplet can be though to be used for further modelling and preclinical experiments in bone engineering studies., Grant PAPIIT IA207420, UNAM, México and AEI/FEDER, UE (DPI2017-90147-R) Spain.

Additive manufacturing (AM) techniques are becoming the approaches of choice for the construction of scaffolds in tissue engineering. However, the development of 3D printing in this field brings unique challenges, which must be accounted for in the design of experiments. The common printing process parameters must be considered as important factors in the design and quality of final 3D-printed products. In this work, we study the influence of some parameters in the design and fabrication of PCL scaffolds, such as the number and orientation of layers, but also others of &ldquo, hidden&rdquo, importance, such as the cooling down rate while printing, or the position of the starting point in each layer. These factors can have an important impact oin the final porosity and mechanical performance of the scaffolds. A pure polycaprolactone filament was used. Three different configurations were selected for the design of the internal structure of the scaffolds: a solid one with alternate layers (solid) (0&deg, 90&deg, ), a porous one with 30% infill and alternate layers (ALT) (0&deg, ) and a non-alternated configuration consisting in printing three piled layers before changing the orientation (n-ALT) (0&deg, 0&deg, ). The nozzle temperature was set to 172 &deg, C for printing and the build plate to 40 &deg, C. Strand diameters of 361 &plusmn, 26 &micro, m for room temperature cooling down and of 290 &plusmn, 30 &micro, m for forced cooling down, were obtained. A compression elastic modulus of 2.12 &plusmn, 0.31 MPa for n-ALT and 8.58 &plusmn, 0.14 MPa for ALT scaffolds were obtained. The cooling down rate has been observed as an important parameter for the final characteristics of the scaffold.

Simple Summary Four-stranded DNA (guanine quadruplex) can regulate many cellular processes such as replication, recombination and also gene expression. This study shows that four-stranded DNA can also affect the activity of mobile genetic elements (transposable elements). We inserted a quadruplex-forming motif into a non-coding region of the Ty1 transposable element and tested its activity in yeast cells. We found that the quadruplex inhibited Ty1 jumping. Especially when the quadruplex was formed on the transcribed strand, the amplification of the element was hindered. Our study shows that DNA conformation can tune the activity of mobile genetic elements that in turn shape eukaryotic genomes during evolution. Abstract Guanine quadruplexes (G4s) serve as regulators of replication, recombination and gene expression. G4 motifs have been recently identified in LTR retrotransposons, but their role in the retrotransposon life-cycle is yet to be understood. Therefore, we inserted G4s into the 3′UTR of Ty1his3-AI retrotransposon and measured the frequency of retrotransposition in yeast strains BY4741, Y00509 (without Pif1 helicase) and with G4-stabilization by N-methyl mesoporphyrin IX (NMM) treatment. We evaluated the impact of G4s on mRNA levels by RT-qPCR and products of reverse transcription by Southern blot analysis. We found that the presence of G4 inhibited Ty1his3-AI retrotransposition. The effect was stronger when G4s were on a transcription template strand which leads to reverse transcription interruption. Both NMM and Pif1p deficiency reduced the retrotransposition irrespective of the presence of a G4 motif in the Ty1his3-AI element. Quantity of mRNA and products of reverse transcription did not fully explain the impact of G4s on Ty1his3-AI retrotransposition indicating that G4s probably affect some other steps of the retrotransposon life-cycle (e.g., translation, VLP formation, integration). Our results suggest that G4 DNA conformation can tune the activity of mobile genetic elements that in turn contribute to shaping the eukaryotic genomes.

Alzheimer’s disease (AD) is the leading cause of dementia worldwide giving rise to devastating forms of cognitive decline, which impacts patients’ lives and that of their proxies. Pathologically, AD is characterized by extracellular amyloid deposition, neurofibrillary tangles and chronic neuroinflammation. To date, there is no cure that prevents progression of AD. In this review, we elaborate on how bioactive lipids, including sphingolipids (SL) and specialized pro-resolving lipid mediators (SPM), affect ongoing neuroinflammatory processes during AD and how we may exploit them for the development of new biomarker panels and/or therapies. In particular, we here describe how SPM and SL metabolism, ranging from ω-3/6 polyunsaturated fatty acids and their metabolites to ceramides and sphingosine-1-phosphate, initiates pro- and anti-inflammatory signaling cascades in the central nervous system (CNS) and what changes occur therein during AD pathology. Finally, we discuss novel therapeutic approaches to resolve chronic neuroinflammation in AD by modulating the SPM and SL pathways.

HA-based hybrid hydrogels were successfully developed. The polysaccharide (HA) chains were chemically modified and hybridized via amidation of their carboxylic groups with aminosilane molecules. HA-polysaccharide chains were crosslinked by a 3D siloxane organic-inorganic matrix via sol-gel. The novel inorganic crosslinking network (PDMS-SiO2) provided to sodium hyaluronate (HA) strong chemical bonds, giving restriction to their natural hydrophilicity and stiffness to its structure (improved rheological properties). It was observed that synthesis conditions such as starting HA concentration solution and temperature determined gelling times, efficiency in the polysaccharide chemical modification and in crosslinking hydrolysis-condensation reactions, resulting in the siloxane organic-inorganic matrix. Drying processes influenced crosslinking in HA hybrid hydrogels, either by enhancing polycondensation reactions or inhibiting them. Room temperature-drying produced more densified hybrid structures. Freeze-drying increased porosity and surface hydroxyl groups (-OH) resulting in more Q3 structural units. 60 °C-drying boosted polycondensation of monodendate structural units, enhancing the formation of hybrid D-Q bonds.

Black- and white-berried grapevine cultivars are distinguished by their ability to accumulate anthocyanins in the berry skin. To assess possible side effects of color variation in berry development and composition in a near-isogenic background, we compared white-berried somatic variants (WV) to their black-berried ancestors in ‘Garnacha’ and ‘Tempranillo’ cultivars. Absence of anthocyanins correlated with lower berry temperature during daytime in WV. At the transcriptome level, besides genes related to anthocyanin accumulation, transcripts encoding enzymes involved in flavonoid backbone biosynthesis and modification were downregulated from veraison in WV skin. Genes mapping to hemizygous genome regions in WV were also downregulated irrespective of berry tissue or developmental stage. Light-responsive genes including flavonol and monoterpenoid biosynthesis genes were upregulated in WV from veraison. In agreement, flavonol partitioning was altered and tri-hydroxylated forms were practically absent in WV, whereas higher levels of specific volatile monoterpenoids and their soluble precursors were detected in WV pericarp. Amino acid precursors of phenolic compounds tended to be higher in WV pericarp. Collectively, greater differences were observed in ‘Tempranillo’ than in ‘Garnacha’, revealing effects of genetic background. These results indicate that the grape color locus directly controls the metabolism of colorless flavonoids, whereas additional alterations in grape quality compounds are established in a cultivar-dependent manner in response to alteration of the berry microclimate caused by the absence of anthocyanins.

Two series of segmented polyurethanes were obtained and their mechanical and thermal properties as well as their biodegradability and cytotoxicity were evaluated. The chemical nature of the polyurethanes was varied by using either 1,4 butanediol (poly-ester-urethanes, PEUs) or l-lysine ethyl ester dihydrochloride (poly-ester-urea-urethanes, PEUUs) as chain extenders. Results showed that varying the hard segment influenced the thermal and mechanical properties of the obtained polymers. PEUs showed strain and hardness values of about 10&ndash, 20 MPa and 10&ndash, 65 MPa, respectively. These values were higher than the obtained values for the PEUUs due to the phase segregation and the higher crystallinity observed for the polyester-urethanes (PEUs), phase segregation was also observed and analyzed by XRD and DSC. Moreover, both series of polymers showed hydrolytic degradation when they were submerged in PBS until 90 days with 20% of weight loss. In vitro tests using a Human Osteoblastic cell line (Hob) showed an average of 80% of cell viability and good adhesion for both series of polymers.

Macrophages are key immune cells for the initiation and development of atherosclerotic lesions. However, the macrophage regulatory nodes that determine how lesions progress in response to dietary challenges are not fully understood. Liver X receptors (LXRs) are sterol-regulated transcription factors that play a central role in atherosclerosis by integrating cholesterol homeostasis and immunity. LXR pharmacological activation elicits a robust antiatherosclerotic transcriptional program in macrophages that can be affected by LXRα S196 phosphorylation in vitro. To investigate the impact of these transcriptional changes in atherosclerosis development, we have generated mice carrying a Ser-to-Ala mutation in myeloid cells in the LDL receptor (LDLR)-deficient atherosclerotic background (M-S196ALdlr-KO). M-S196ALdlr-KO mice fed a high-fat diet exhibit increased atherosclerotic plaque burden and lesions with smaller necrotic cores and thinner fibrous caps. These diet-induced phenotypic changes are consistent with a reprogramed macrophage transcriptome promoted by LXRα-S196A during atherosclerosis development. Remarkably, expression of several proliferation-promoting factors, including the protooncogene FoxM1 and its targets, is induced by LXRα-S196A. This is consistent with increased proliferation of plaque-resident cells in M-S196ALdlr-KO mice. Moreover, disrupted LXRα phosphorylation increases expression of phagocytic molecules, resulting in increased apoptotic cell removal by macrophages, explaining the reduced necrotic cores. Finally, the macrophage transcriptome promoted by LXRα-S196A under dietary perturbation is markedly distinct from that revealed by LXR ligand activation, highlighting the singularity of this posttranslational modification. Overall, our findings demonstrate that LXRα phosphorylation at S196 is an important determinant of atherosclerotic plaque development through selective changes in gene transcription that affect multiple pathways., This work was supported by Medical Research Council New Investigator Grant G0801278 (to I.P.-T.), British Heart Foundation (BHF) Project Grant PG/13/10/30000 (to I.P.-T.), a University College of London Grand Challenges PhD Studentship (to I.P.-T.), BHF Studentship FS/12/59/30649 (to I.P.-T.), the Royal Free Charity PhD Program in Medicine (I.P.-T.), and the University College London Division of Medicine (I.P.-T.). It was also supported by Spanish Ministry of Economy and Competitiveness Grants SAF2014-56819-R (to A.C.) and SAF2015-71878-REDT (to A.C.). T.H.T. was funded by the State São Paulo Research Foundation Grant 2017/12314-0.

Macrophages are key immune cells for the initiation and development of atherosclerotic lesions. However, the macrophage regulatory nodes that determine how lesions progress in response to dietary challenges are not fully understood. Liver X receptors (LXRs) are sterol-regulated transcription factors which play a central role in atherosclerosis by integrating cholesterol homeostasis and immunity. LXR pharmacological activation elicits a robust anti-atherosclerotic transcriptional program in macrophages that can be affected by LXRα S196 phosphorylation in vitro. To investigate the impact of these transcriptional changes in atherosclerosis development, we have generated mice carrying a Ser-to-Ala mutation in myeloid cells in the LDLR-deficient atherosclerotic background (M-S196ALdlr-KO). M-S196ALdlr-KO mice fed a high fat diet exhibit increased atherosclerotic plaque burden and lesions with smaller necrotic cores and thinner fibrous caps. These diet-induced phenotypic changes are consistent with a reprogramed macrophage transcriptome promoted by LXRα-S196A during atherosclerosis development. Remarkably, expression of several proliferation-promoting factors including the proto-oncogene FoxM1 and its targets are induced by LXRα-S196A. This is consistent with increased proliferation of plaque-resident cells in M-S196ALdlr-KO mice. Moreover, disrupted LXRα phosphorylation increases expression of phagocytic molecules resulting in increased apoptotic cell removal by macrophages, explaining the reduced necrotic cores. Finally, the macrophage transcriptome promoted by LXRα-S196A under dietary perturbation is markedly distinct from that revealed by LXR ligand activation, highlighting the singularity of this post-translational modification. Overall, our findings demonstrate that LXRα phosphorylation at S196 is an important determinant of atherosclerotic plaque development through selective changes in gene transcription that affect multiple pathways.

Compounds having the general formula MFO·4H2O where M = Ca or Sr and FO = a folate anion were prepared and their structure and physico-chemical properties were determined by elemental and thermal TGA, DSC analysis, FTIR, and EDAX spectroscopies and DRX. The results indicate that the two compounds form stable structures where folic acid acts as a self-bridging ligand via two bidentate carboxylate groups. Moreover the two compounds showed a low toxicity in vitro response as h-osteoblast cell viability was not negatively affected by the presence of folate derivatives within the range of 0.063-0.5 mg ml-1. The results also indicate that the folate derivatives that are formed overcome the toxic effects related to free Sr2+ ions. The range of maximum cell viability corresponding with a concentration of SrFO falls within the in vitro physiologically active range for strontium while within the same range the strontium derivative showed a potential osteogenic activity as indicated by the overexpression of ALP activity.

Emulsion-templated (polyHIPE) scaffolds for bone tissue engineering were produced by photopolymerisation of a mixture of trimethylolpropane tris(3-mercaptopropionate) and dipentaerythritol penta-/hexaacrylate in the presence of hydroxyapatite (HA) or strontium-modified hydroxyapatite (SrHA) nanoparticles. Porous and permeable polyHIPE materials were produced regardless of the type or incorporation level of the bioceramic, although higher loadings resulted in a larger average pore diameter. Inclusion of HA and SrHA into the scaffolds was confirmed by EDX-SEM, FTIR and XPS and quantified by thermogravimetry. Addition of HA to polyHIPE scaffolds significantly enhanced compressive strength (148–216 kPa) without affecting compressive modulus (2.34–2.58 MPa). The resulting materials were evaluated in vitro as scaffolds for the 3D culture of MG63 osteoblastic cells vs. a commercial 3D cell culture scaffold (Alvetex®). Cells were able to migrate throughout all scaffolds, achieving a high density by the end of the culture period (21 days). The presence of HA and in particular SrHA gave greatly enhanced cell proliferation, as determined by staining of histological sections and total protein assay (Bradford). Furthermore, Von Kossa and Alizarin Red staining demonstrated significant mineralisation from inclusion of bioceramics, even at the earliest time point (day 7). Production of alkaline phosphatase (ALP), an early osteogenic marker, was used to investigate the influence of HA and SrHA on cell function. ALP levels were significantly reduced on HA- and SrHA-modified scaffolds by day 7, which agrees with the observed early onset of mineralisation in the presence of the bioceramics. The presented data support our conclusions that HA and SrHA enhance osteoblastic cell proliferation on polyHIPE scaffolds and promote early mineralisation.

The aim of this work is to evaluate the potential of cryogels to be used as scaffolds in tissue engineering. Scaffolds based on the α-tricalcium phosphate reinforced PDMAEMA (Poly(dimethyl aminoethyl methacrylate))/PHEMA (poly(hydroxyethyl methacrylate)) system were prepared and human trabecular bone-derived cells (HTBs) and bone marrow derived-mesenchymal stem cells (BM-MSCs) cultured on them. Several features, such as porosity, pore shape, molecular weight between crosslinks and mesh size, are studied. The most suitable PDMAEMA/PHEMA ratio for cell proliferation has been assessed and the viability, adhesion, proliferation and expression of osteoblastic biochemical markers are evaluated. The PDMAEMA/PHEMA ratio influences the scaffolds porosity. Values between 53% ± 5.7% for a greater content in PHEMA and 75% ± 5.5% for a greater content in PDMAEMA have been obtained. The polymer ratio also modifies the pore shape. A greater content in PDMAEMA leads also to bigger network mesh size. Each of the compositions were non-cytotoxic, the seeded cells remained viable for both BM-MSCs and HTBs. Thus, and based on the structural analysis, specimens with a greater content in PDMAEMA seem to provide a better structural environment for their use as scaffolds for tissue engineering. The α-tricalcium phosphate incorporation into the composition seems to favor the expression of the osteogenic phenotype., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)

The preparation of apatite–alendronate hybrid materials by reactive milling is proposed in this work. Calcium phosphate compounds of various compositions have been associated to bisphosphonates and found suitable for local application with release kinetics of the drug compatible with the inhibition of bone resorption. Hybrid compounds have been obtained by reactive milling. The compositions used were: AP(X-100), Alendronate(X) where X=7 and X=15. An interaction between the hydroxyl group of the apatite and the amine group of alendronate can be identified with FTIR and enables to confirm the formation of the hybrids. The incorporation of the alendronate hinders the growing of the apatite crystals resulting in smaller coherent domains of diffraction for the apatite phase.

The purpose of this work is to study the dissolution mechanism of SiO2-based bioactive hybrid materials containing both CaO and P2O5 in their structures and to determine the influence of apatite crystallization over the surface features of the hybrids during degradation. Hybrid materials were synthesized using sol–gel method. Tetraethoxysilane (TEOS), hydroxyl terminated polydimethylsiloxane (PDMS), Ca(NO3)2·4H2O, and triethyl phosphate (TEP) were used as reactants. The degradation and bioactivity of the hybrid materials were tested by soaking the specimens into simulated body fluid (SBF). Raman spectroscopy, tensiometry and N2 adsorption/desorption curves were used to measure the changes during the degradation experiments. Several mathematical approaches have been taken to analyze the results. The growth of an apatite layer on the surface of SiO2-modified PDMS-P2O5-CaO hybrid materials occurs together with degradation of the silica-based matrix. The dissolution kinetics depends upon the composition of the material. It varies from a surface-driven mechanism in the case of low-P2O5 samples to a degradation path which fits into a Weibull type kinetic model, typical of matrix dissolution processes in materials enriched in P2O5. During degradation, the surface parameters, fractal constant and anisotropy of the pores were determined. The slight increase of the fractal constant in low-containing P2O5 materials suggests the formation of a homogeneous silica-like layer in the first stage of degradation, which also works as anchoring nucleus for subsequent apatite formation. In all the cases, the degradation leads to ink-bottle shaped pores, increasing their volume as degradation occurs, but keeping their neck shape., This work was supported by SIP-IPN 20150064 Project (Mexico), DGICYT Project, MAT2014-51918-C2-1-R (Spain), Fundación General CSIC (Programa ComFuturo) (A. Tamayo). DA Sánchez – Téllez also acknowledges CONACYT for the scholarship given.

Protein-surface interaction may determine the success or failure of an implanted device. Not much attention have been paid to the specific surface parametes of hydroxyapatite (OHAp) that modulates and determines the formation and potential activity of the layer of proteins that is first formed when the material get in contact with the host tissue. the influence of specific surface area (SSA), crystallite size (CS) and particle size (PS) of OHAp on the adsorption of proteins relevant for bone regeneration is evaluated in this article. OHAp have been prepared by a wet chemical reaction of Ca(OH)(2) with H(3) PO(4) . One set of reactions included poly acrylic acid in the reactant solution to modify the properties of the powder. Fibrinogen (Fg) Fraction I, type I: from Human plasma, (67% Protein), and Fibronectin (Fn) from Human plasma were selected to perform the adsorption experiments. The analysis of protein adsorption was carried out by UV/Vis spectrometry. A lower SSA and a different aspect ratio are obtained when the acrylic acid is included in the reaction badge. The deconvolution of the amide I band on the Raman spectra of free and adsorbed proteins reveals that the interaction apatite-protein happens through the carboxylate groups of the proteins. The combined analysis of CS, SSA and PS should be considered on the design of OHAp materials intended to interact with proteins.

Introduction The gradual aging of the population results in increased incidence of osteoporotic bone fractures. In a good quality bone, the fixation with the usual methods is adequate, but not in osteoporotic bone, in which consolidation delays and other complications are common, with failure rates for screws up to 25%. Objective To test fibronectin loaded hydroxyapatite as a complementary treatment for osteoporotic fractures. Material and Methods This study was performed in a vivo model; 42 female osteoporotic adult rabbits 4–5 kg (White New Zealand) were used. Two groups (hydroxyapatite and fibronectin loaded hydroxyapatite) and a control group were tested. 3 time points 24 h, 48 h and 5 days were studied. Defects were created in both femurs, in one of them, a cannulated screw (4 mm) and a biocompatible material were placed; in the other femur a screw was inserted without supplemented material forming the control group. Osteoporosis was induced from models already known throughout administration of steroids. Samples were analyzed histologically and through imaging (micro Ct). Results Basal levels of BMD are observed below to normal when compared to other studies (0.25/0.3 instead of 0.4). Global and dependent of time analysis of samples, show no significant differences for samples analyzed. However, an important trend was noted for variables that define the trabecular bone microarchitecture. Indices that define trabecular microarchitecture in the comparative analysis found to have statistical differences ( p Discussion Osteosynthesis in an osteoporotic bone is a challenge for the surgeon, due to a reduced bone mineral density and different bone architecture. The main finding was the verification of the hypothesis that the trabecular bone parameters increases with our augmentation material in weak rabbit bone quality. Also, the histological analyses of samples show an increase of non inflammatory cells in protein samples (OHAp-Fn) from the first 24 hours. Conclusion An early response of rabbit osteroporotic bone to a complementary treatment with fibronectin loaded hydroxyapatite has been observed. This response is reflected in greater values for indices that define the trabecular bone microarchitecture, thickness and separation, a greater non-inflammatory cellularity after only 24 hours and an increased amount of connective tissue observed at 48 hours.

The purpose of the current study was to investigate whether the cryopolymerization technique is capable of producing suitable scaffolds for bone tissue engineering. Cryopolymers made of 2-hydroxyethyl methacrylate and acrylic acid with (W1 and W20) and without (W0) wollastonite particles were prepared. The elastic modulus of the specimens rose one order of magnitude from W1 to W20. Total porosity reached 56% for W0, 72% for W1 and 36% for W20, with pore sizes of up to 2 mm, large interconnection sizes of up to 1 mm and small interconnection sizes of 50-80 µm on dry specimens. Cryogels swell up to 224 ± 17% for W0, 315 ± 18% for W1 and 231 ± 27% for W20 specimens, while maintaining the integrity of the bodies. Pore sizes > 5 mm can be observed for swollen specimens. The biocompatibility of the samples was tested using human mesenchymal stem cells isolated from bone marrow and adipose tissues. Both types of cells attached and grew on the three tested substrates, colonized their inner regions and organized an extracellular cell matrix. Fibronectin and osteopontin levels decreased in the media from cells cultured on W20 samples, likely due to increased binding on the ECM deposited by cells. The osteoprotegerin-to-receptor activator of nuclear factor-κB ligand secretion ratios increased with increasing wollastonite content. Altogether, these results indicate that an appropriate balance of surface properties and structure that favours stromal cell colonization in the porous cryogels can be achieved by modulating the amount of wollastonite.

Though hydroxyapatite has the ability to promote bone growing, devices based on OHAp are mechanically weak and need to be reinforced for load bearing applications or in the manufacturing of scaffolds for bone regeneration. Graphite (Gr) could provide appropriate reinforcement properties to OHAp without being deleterious for the biocompatibility of the system. This paper describes an accelerated synthesis of the OHAp with ultrasonic agitation in the presence of functionalized graphite (GO). The toxicity of the Graphite and the GO-OHAp system is evaluated. GO-OHAp was produced by a wet chemical reaction involving CaCl2 and Na2HPO4. The calcium salt solution was added first and the solution sonicated for 1 hour, before repeating the operation with the phosphate solution. Biocompatibility was tested by using a primary cell culture of HOB (ECCAC). The disappearance of the maximum at 2q = 26.32º corresponding to the d002 plane of graphite and the appearance of the maximum at 2q = 13.2º in the XRD patterns is related with an expansion of the grapheme sheets from 0.34 nm to 0.59 nm and it has been used to assess the graphite oxidation. The OHAP on GO growing has been confirmed by the appearance of a broad peak centred at 2q = 31.5º and a sharpened peak at 2q = 26.0º characteristic of low crystalline apatites. Although the employed graphite can be considered biocompatible, cellular viability is significantly improved by the presence of apatite.

This paper focuses on the preparation of siloxane-polyurethane hybrid materials using a sol-gel method. The global aim of the project is to tailor mechanical properties, degradability rate, bioactivity and biocompatibility to design scaffolds for musculoskeletal applications. A series of seven hybrid materials were synthesized with varying the proportion of polydimethylsiloxane (PDMS), and Polyurethane (PU). The organic part ratios (by weight) employed were (% PDMS:% PU) 30:0, 35:5, 20:10, 15:15, 10:20, 5:25, and 0:30. The organic part was reacted with constant 70 % TEOS to obtain the hybrid materials. A sol-gel process was selected for the synthesis of the hybrids. The characterization of materials was carried out by the fourier-infrared spectroscopy (FT-IR), x-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electronic microscopy (SEM) and proton nuclear magnetic resonance (1H-NMR) techniques in order to analyze the structure, microstructure and chemical composition of the hybrid materials. Gelification time depends on the proportion of PU used. When no PU is employed, the gel time is 8 hours but it rises up to 18 days for 30 % of polyurethane. Materials range from opaque to translucent but with a greater fragility for greater amounts of polyurethane. No differences in the bonding of materials could be appreciated.

The manufacturing of a composite made of a synthetic bioactive ceramic, pseudowollastonite (psW), and a bioresorbable copolymer ethylmethacrylate–vinylpyrrolidone (EMA/VP) is presented in this article. psW porous blocks were produced by dipping an open porous polyurethane foam in a psW containing slurry. A 40/60 wt % EMA/VP monomers mixture was poured on the blocks, and free radical polymerization initiated by azobis(isobutyronitrile) at 50°C. Disks of 1 mm height were obtained by cutting the composite with a diamond saw, and bioresorption and bioactivity of the specimens were tested by immersion of the disks into SBF. A ceramic/polymer weight ratio of 72/28, greater than the usually achievable ratio by polymeric solidification of slurries of monomers charged with a powdered solid component, has been obtained. The system is bioactive and does not change the pH of the medium during the degradation test. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res 80A:, 2007

Bisphosphonates (BPs) may play an important role in minimizing osteolysis. In this work two new bisphosphonates pertaining to second and third generations respectively, have been synthesized and incorporated onto a chemically enriched hydroxyapatite. BP synthesis has been performed by adding H3PO3, PCl3 and methanesulfonic acid over 4-aminophenyl acetic acid (APBP) and 1-H-indole-3-acetic acid (IBP) respectively at 65°C in a N2 atmosphere. These compounds bear a primary amine group bonded to an aromatic ring, and a secondary amine group within a heterocyclic ring respectively. A chemically enriched hydroxyapatite with a chemical content corresponding to a 50% fluorided hydroxyapatite has been synthesized. Ceramic bodies manufactured by uniaxial pressure followed by cold isostatic press have a 97% density and submicron grain size. The BP was adsorbed onto the surface by immersion in a stirred solution at 37°C for 48 hours. A 10-fold decrease of the surface energy was observed for bodies modified with the APBP whereas only a 25 % decrease is obtained for bodies loaded with the bisphosphonate loaded with the IBP.

Iron is a vital element of cellular function within the body. High concentrations of iron can be found in the kidneys and the circulatory system. In bones and teeth it is present as a trace element. The use of iron-based compounds in combination with hydroxyapatite offers a new alternative for prosthetic devices. This work investigates the synthesis and processing of iron containing apatites as a possible new type of ceramic for biomedical devices. Stoichiometric and calcium deficient iron containing apatites were synthesized by a wet chemical reaction with di-ammonium-hydrogen-phosphate, calcium nitrate and a ferrous iron nitrate solution. A secondary phase of tri-calcium-phosphate (TCP) was observed after heat treatment of iron containing, calcium deficient, hydroxyapatite. The apatite structure was maintained after heat treatment of stoichiometric apatite, synthesized in the presence of iron. Sintering in air produced oxidation of Fe2+ to Fe3+, resulting in the formation of hematite as a secondary phase. The introduction of iron into the synthesis of hydroxyapatite causes: (i) an increase of the a-lattice parameter after synthesis and heat treatment in air; (ii) an increase in the c-lattice parameter after sintering in air.

The development of synthetic apatites that replicate the features and properties of the contained in natural tissues will help to diminish the misfit between artificial implants and natural hostesses but the structure of these compounds is still under discussion. The variability in Ca/P ratio of calcium deficient apatites has been explained through different models: surface adsorption, lattice substitution and intercrystalline mixtures of hydroxyapatite and octacalcium phosphate. This work investigates which of the models mentioned suits better in a range of samples. Hydroxyapatites obtained by precipitation, by hydrolysis of dicalcium phosphate and calcined samples with Ca/P ratio between 1.50 and 1.77 and specific surface area between 7 and 108 m2/g have been analysed. OCP and surface adsorption models suit better for great SSA particles and low Ca/P ratio while for smaller SSA particles the lattice substitution model is more accurate. SSA also plays the main role when the capacity to absorb substances is studied though their chemistry can not be explained solely in terms of surface reactivity.

Nine samples of Ca-deficient apatite (Ca-def Ap) were prepared from suspensions of CaHPO4 (monetite) at 90 degrees C by raising the pH from approximately 4 through release of NH3 produced by the hydrolysis of urea. Products were dried at 100 degrees C for 24h and studied by chemical analyses, X-ray powder diffraction (XRPD) (and Rietveld analysis of this data), Ca/P ratio determination (quantitative phase analysis of samples after heating to 900 degrees C from Rietveld analysis of XRPD data), scanning electron microscopy, He pycknometry, 1H and 31P MAS NMR spectrometry and Fourier transform infrared and Raman spectroscopy. All samples contained apatite, but three also contained monetite. Infrared and Raman spectroscopy confirmed the presence of HPO4(2-) and absence of carbonate ions in the six monetite-free samples. Mean results for the six samples were: a = 9.4320(40), c = 6.8751(31) A; unit cell formula from chemical analysis neglecting protonation of phosphate ion, Ca(9.303(50))(PO4)6(OH)(0.606(99)).1.97(12)H2O; theoretical density 3.10 g cm(-3); experimental density (mean for three samples) 3.15 g cm(-3); and Ca/P mole ratio from chemical analysis and phase analysis after heating to 900 degrees C, 1.550(8) and 1.550(2), respectively. An earlier assignment of a line at 6 ppm in the 1H NMR spectrum of similar samples to HPO4(2-) ions could not be confirmed; hence no information about the HPO4(2-) ion content could be derived, in disagreement with the previous NMR study. A shoulder at approximately 0.9 ppm relative to 85 wt% H3PO4 in the 31P NMR spectrum was assigned to HPO4(2-) ions. Occupancies from the Rietveld structure refinements indicated preferential loss of Ca from Ca2 sites compared with Ca1, but the loss was substantially smaller than expected from chemical analyses. It is suggested that imperfect modelling of the structure in the refinement, particularly disorder associated with the Ca2 site, resulted in errors in Ca2 occupancies. The P-O bonds were slightly shorter than those in stoichiometric hydroxyapatite, rather than longer as might be expected from protonation of phosphate tetrahedra. However, consideration of known acid phosphate structures indicated that it was unlikely that the increase in P-O lengths would be sufficient to be detected. The observed decrease was tentatively assigned to the presence of Ca2+ ion vacancies.

Hydroxyapatite has been frequently described as an osteoconductive but not osteoinductive material based on failure to observe bone formation in nonbony sites. Bisphosphonates (BPs) are stable pyrophosphate analogs, that enhance the proliferation, differentiation and bone forming activity of osteoblasts and are potent inhibitors of bone resorption. In this paper, the modification of a calcium hydroxyfluor carbonate apatite with sodium alendronate and (4-(aminomethyl)benzene)bisphosphonic acid is described. The surface modification is carried out by refluxing the apatite in a bisphosphonate acetone solution. Modified particles are characterized by thermal analysis, ATR-IR spectroscopy and contact angle between other techniques. A weight loss between 150 and 500ºC can be observed for the modified apatites. IR spectra show the appearance of bisphosphonate bands on modified powders. The surface energy of the modified apatite is reduced up to a 74% from the total apatite value after the alendronate surface modification with a decrease of 58% of the polar component main responsible of the cellular interaction of biomaterials., Financial support through research project MAT2002-04147-C02-02, CICYT (Spain) is acknowledged. LMRL has been supported by CAM regional government (Spain) through the program to incorporate doctors to the Madrid research system.

Modification of hydroxyapatite surfaces can improve the properties of biomedical devices. The objective of this work was to encapsulate hydroxyapatite particles with a fluorapatite layer. A suspension of hydroxyapatite microspheres was prepared in a solution at different pH and treated with ammonium fluoride. pH, calcium, and fluoride were monitored in real time and particles subjected to fluoride analysis. After addition of fluoride, it was found that more material is released from the particle surface at low pH conditions, but leads to a high fluoride uptake from solution. Low solution fluoride levels produce a fluorapatite layer, but higher fluoride levels produce calcium fluoride.

Hydroxy-fluorapatites (OH-FAps) occur biologically in teeth and form the basis for application as biomaterials. This work aims to synthesize a series of fluoride substituted calcium hydroxyapatites (OHAps) to determine how fluoride influences the synthesis and the resulting characteristics of solid solutions. OH-FAPs powders were synthesized with a chemical composition of Ca(10)(PO(4))(6)(OH)(2-x) F(x), with x=0.0, 0.4, 0.8, 1.2, 1.6 and 2.0. The synthesis of partially substituted OHAp yields materials with lower crystallinity and higher specific surface area than OHAp or fluorapatite (FAp). The smallest crystal size of 263A, occurs at less than 50% hydroxyl substitution with fluoride at x=0.4, and the highest surface area of 132m(2)/g occurs at x=0.8. Reaction kinetics occur faster at higher fluoride content, producing the expected Ca/P ratio of 1.67 only for x=2.0. X-ray and IR studies show that OH-FAPs are homogeneous solid solutions instead of mixtures of OHAp and FAp. The presence of a high fluoride concentration increases the driving force for crystal growth during the calcination process.

X-ray diffraction (XRD) patterns of hydroxyfluorapatites with a nominal composition of Ca10(PO4)6(OH)2-xFx, where x = 0.0, 0.4, 0.8, 1.2, 1.6, and 2.0, were collected and analyzed using the Rietveld method. A multiphase Rietveld analysis performed on calcined samples reveals a range of Ca/P ratios from 1.56 for the sample with x = 0.4 to 1.67 for the sample with x = 2.0 on the synthesized powders. Calcined apatites exhibit a decrease in the lattice parameter a, a greater crystallite size, lower distortion in the phosphate tetrahedra, and greater stability of the apatite structure for higher fluoride contents.

The layering of fluorapatite on hydroxyapatite bodies provides a means of decreasing the solubility of hydroxyapatite, providing fluoride for possible stimulation of bone formation and delaying the release of calcium and phosphate from the more soluble hydroxyapatite. The purpose of this work was to encapsulate hydroxyapatite particles with fluorapatite spanning a thickness more than several crystallites deep. A three-step procedure was employed. Hydroxyapatite powder was immersed in an electrolyte solution until an equilibrium was established between the solid and the dissolved calcium at pH 4.67 and 37 °C. Equilibrium was determined by measurement of dissolved calcium with a calcium-specific ion-specific electrode. A 5×10−2 M ammonium fluoride added to the suspension resulted in a rapid decrease of both calcium and fluoride in the solution. Analysis with X-ray diffraction indicated that a fluoride rich layer containing calcium fluoride deposited onto the particle surface. Scanning electron microscopy revealed submicron spherical precipitate clusters on the hydroxyapatite particles. These clusters transformed to fluorapatite by soaking in a 0.1 M K2HPO4 solution at pH 8 and 70 °C. A total time of 10 h was necessary for complete transformation of CaF_2 into fluorapatite.

The transformation of calcium sulfate hemihydrate into gypsum via reaction with water has been used for many years to produce materials for bone augmentation. In this work, a mixture of CaSO4·1/2H2O and hydroxyapatite was prepared, and its behavior as cement was studied and compared with that of pure calcium sulfate hemihydrate. The setting process was monitored with Gillmore needles, X-ray diffraction, and differential scanning calorimetry. The utilization of the mixture allows one to prepare homogeneous pastes with better manipulation characteristics than pure calcium sulfate hemihydrate. The workability and setting time of the hydroxyapatite-containing cements are higher than those of pure CaSO4·1/2H2O. The different techniques employed allow us to relate the initial setting time with the chemical transformation of the calcium sulfate hemihydrate into calcium sulfate dihydrate. The biphasic specimens show an improved bioactivity response compared to pure hydroxyapatite or gypsum when soaked in a simula...

The aims of this paper are: (1) to review the current state of the art in the field of cartilage substitution and regeneration; (2) to examine the patented biomaterials being used in preclinical and clinical stages; (3) to explore the potential of polymeric hydrogels for these applications and the reasons that hinder their clinical success. The studies about hydrogels used as potential biomaterials selected for this review are divided into the two major trends in tissue engineering: (1) the use of cell-free biomaterials; and (2) the use of cell seeded biomaterials. Preparation techniques and resulting hydrogel properties are also reviewed. More recent proposals, based on the combination of different polymers and the hybridization process to improve the properties of these materials, are also reviewed. The combination of elements such as scaffolds (cellular solids), matrices (hydrogel-based), growth factors and mechanical stimuli is needed to optimize properties of the required materials in order to facilitate tissue formation, cartilage regeneration and final clinical application. Polymer combinations and hybrids are the most promising materials for this application. Hybrid scaffolds may maximize cell growth and local tissue integration by forming cartilage-like tissue with biomimetic features, This work was supported by SIP-IPN 20170510 Project (Mexico), DGICYT Project, MAT2014-51918-C2-I-R (Spain), (CONACYT/CSIC)-EMHE program through project No. MHE200011 (Mexico-Spain). DA Sánchez-Téllez also acknowledges CONACYT (Mexico) for the scholarship given. The authors acknowledge Stephanie Cisneros-Téllez for helping them in the digitalization of Figures 1, 4 and 8.

The growing necessity of biomaterials has increased the interest in calcium phosphates, particularly apatites. Small differences in stoichiometry, crystallinity, morphology, etc. could contribute to the different clinical behaviors observed, so perfect control of the synthesis parameters and their influence in the characteristics of the samples is a must. In the present work, a crystallization set able to produce massive and reproducible quantities of different calcium phosphates is presented. Apatites with different stoichiometries and morphologies are prepared, and the effects of varying synthesis conditions are analyzed. Temperatures in the range 25−37 °C are necessary to obtain apatites with crystal sizes in the range of adult human bone. Longer reaction times produce increased Ca/P ratios. Aging of the precipitated powder can lead to the incorporation of minor quantities of carbonate. It is possible to force the incorporation of carbonate ions into the apatitic structure without introducing monovalen...

Composite biomaterials with good mechanical response and a partially biodegradable character were prepared by the free radical polymerization of mixtures of α-Al 2 O 3 , low-molecular-weight but crystalline poly(L-lactic acid) (PLLA), and methyl methacrylate (MMA). Cylindrical specimens prepared with different composition were characterized by thermogravimetry, calorimetry, 1 H-NMR spectroscopy, and x-ray diffraction (XRD). The in vitro biodegradative process was studied in different media, following variations of the pH, gravimetric weight loss of the specimens, and crystalline domain change by XRD after immersion in pure water and buffered solutions at pH 4.0 and pH 8.0 for 90 days. Formation of a relatively porous structure with good cohesion after the biodegradative treatment (confirmed by SEM) was observed. These systems can be considered for applications in orthopedic surgery as filling biomaterials and even as control drug-delivery systems.

Tin(IV) halide complexes with 1,3-dimethylurea (dmu) and 1,3-dimethylthiourea (dmtu) have been prepared and characterised by IR, Raman and 119Sn Mossbauer spectroscopies. The previously reported isomer shift (IS) values of SnBr4(dmtu)2 and SnI4(dmtu)2 have been revised to 0.98 and 1.32 mm s−1, respectively. The IS increases with decreasing electronegativity of the halogen atoms, and on going from dmu to dmtu complexes. The variation of the IS of SnX4L2 complexes with the electronegativity of the halogen X and the donor atom of the ligand L is studied. The IS can be used to get information about the atoms bonded to tin. The shifts of v(CE) (EO, S) and vas(NCN) with respect to the free ligands, in the IR spectra of the complexes, indicate that the dmu and dmtu ligands coordinate through the O and S atoms, respectively. The structure of the complexes is discussed in terms of the Mossbauer quadrupole splitting and the tin-halogen stretching vibrations in the IR and Raman spectra.

Composite materials are very promising biomaterials for hard tissue augmentation. The approach assayed in this work involves the manufacturing of a composite made of a bioactive ceramic, natural wollastonite (W) and a nanostructured copolymer of ethylmethacrylate (EMA) and vinylpyrrolidone (VP) to yield a bioresorbable and biocompatible VP–EMA copolymer. A bulk polymerization was induced thermally at 508C, using 1 wt % azobis(isobutyronitrile) (AIBN) as free-radical initiator. Structural characterization, compressive strength, flexural strength (FS), degradation, bioactivity, and biocompatibility were evaluated in specimens with a 60/40 VP/EMA ratio and ceramic content in the range 0–60%. A good integration between phases was achieved. Greater compression and FS, in comparison with the pure copolymer specimens was obtained only when the ceramic load got up to 60% of the total weight. The soaking in NaCl solution resulted in the initial swelling of the specimens tested. The maximum swelling was reached after 2–3 h of immersion and it was significantly greater for lower ceramic loads. This result makes the polymer component the main responsible for the interactions with the media. After soaking in SBF, microdomains segregation can be observed in the polymer component that can be related with a dramatic difference in the reactivity of both monomers in free radical polymerization, whereas the formation of an apatite-like layer on the W surfaces can be observed. Biocompatibility in vitro studies showed the absence of cytotoxicity of all formulations. The cells were able to adhere on the polystyrene negative control and on specimens containing 60 wt % wollastonite forming a monolayer and showing a normal morphology. However, a low cellular growth was observed. 2008 Wiley Periodicals, Inc. J Biomed Mater Res 88A: 53–64, 2009

Bisphosphonates (BP) are drugs currently administered orally to treat diseases characterised by an excessive bone resorption. Alternative and more efficient delivery routes and more potent compounds are being investigated. Three implantable delivery systems, which allow the controlled release of therapeutic agents from the device core, are examined in this paper. (4- (aminomethyl) benzene) bisphosphonic acid (ABBP) was incorporated on Ca8.8Na0.8(PO4)4.8(CO3)1.2(OH)0.4F1.6 particles by refluxing the powder in a 60 mmol suspension in acetone at 60ºC for 5 hours. 4-aminophenyl acetic bisphosphonate monosodium salt (APBP) and 1- H-indole-3-acetic bisphosphonate monosodium (IBP) were loaded on Ca10(PO4)6(OH)1F1 ceramic bodies by stirring the ceramic bodies in 0.04M BP solutions. Injectable acrylic cements based on self-curing formulations of methyl methacrylate (MMA) and vitamin E were loaded with APBP and IBP. The incorporation of ABBP was confirmed by MAS-NMR spectroscopy. Modified powder shows two different phosphorous environments, the first one at 2.91 ppm can be assigned to the apatite base and the second one at 18.0 ppm has to be attributed to the phosphonic group of the ABBP. The IBP addition on ceramic surfaces did not decrease the number of osteoclast colonies and appeared to improve the performance of the HA as a surface for osteoblast culture. A therapeutic dosage of APBP and IBP can be achieved from acrylic cements that showed lack of toxicity and an increased cellular activity and proliferation, Financial support from CICYT, Spain (MAT2004-01654) and NoE EXPERTISSUES (UE contract Nº: 500283-2) is acknowledged. Mar Fernández and Luis M. Rodríguez Lorenzo are supported by the Ramón y Cajal Programme, MEC-Spain

En este trabajo se presenta el estudio de la biocompatibilidad in vitro, empleando cultivos celulares de fibroblastos embrionarios humanos, de tres sistemas acrílicos de liberación controlada de bisfosfonatos (BFs). Estos sistemas, basados en metacrilato de metilo (MMA), metacrilato de vitamina E (MVE) y trietilenglicol dimetacrilato (TEGDMA), han sido diseñados para su aplicación en el tratamiento de enfermedades caracterizadas por una elevada resorción osteoclástica. En su preparación se ha empleado un BP comercializado (alendronato; ALN) y dos de nueva síntesis, pertenecientes a la segunda y tercera generaciones, el ácido 1-hidroxi-2-[4-aminofenil]etano-1,1-difosfónico (APBP) y el ácido 1-hidroxi-2-[3-indolil]etano-1,1-difosfónico (IBP), respectivamente. La citotoxicidad de MVE ha sido notablemente inferior a la medida para TEGDMA. La citotoxicidad de APBP e IBP se ha comparado con la de ALN, obteniéndose unos valores para la concentración IC50, de15,56, 9,86 y 6,25 mmol/l para APBP, ALN e IBP, respectivamente. Los niveles de citotoxicidad liberada han sido superiores para la formulación portadora de ALN, situándose a continuación los cementos cargados con IBP y APBP. Cuando los cultivos se han establecido sobre la superficie de las formulaciones, se han detectado unos niveles de proliferación celular y adhesión superiores para los sistemas de liberación de IBP y APBP, siendo además inferior en estos casos la mortalidad celular. This paper reports the in vitro biocompatibility study, using human embryonic fibroblast cultures, of three acrylic systems for controlled release of bisphosphonates (BFs). These systems, that are based on methyl methacrylate (MMA), vitamin E methacrylate (MVE) and triethyleneglycol dimethacrylate (TEGDMA), have been designed for its application in the treatment of pathologies characterized by a high osteoclastic resorption. A commercial BP (alendronate; ALN) and two novel BPs, belonging to the second and third generations, 1-hydroxy-2-[4-aminophenyl]ethane-1,1-diphosphonic acid (APBP) and 1-hydroxy-2-[3-indolyl]ethane-1,1-diphosphonic acid (IBP), respectively, have been used in their preparation. The cytotoxicity of MVE has been notably lower than that measured for TEGDMA. Cytotoxicity of APBP and IBP was evaluated along with that of ALN, and the following values of the IC50, concentration were obtained for APBP, ALN and IBP respectively: 15.56, 9.86 and 6.25 mmol/l. The cytotoxicity levels obtained from the extracts of the cured systems were higher for the formulation containing ALN, followed by the cements loaded with IBP and APBP. When the cultures were seeded directly on the formulations surface, higher levels of cellular proliferation and adhesion were obtained for the systems containing IBP and APBP, the cellular mortality being also inferior in these cases.

Fluoride substitution within hydroxyapatite is an important occurrence for biological apatites and is a promising approach for the chemical modification of synthetic hydroxyapatite. Limited information on the influence of fluoride substitution for hydroxyl groups on the mechanical properties has provided the rationale for this study. Hydroxyfluorapatites with 0%, 20%, 40%, 60%, 80% and 100% replacement of hydroxyl groups with fluoride ions were assessed for hardness, elastic modulus, fracture toughness and brittleness using microindentation of sintered pellets. The production of samples with a similar grain size and density allowed the influence of fluoride on mechanical properties to be determined. It was found that the hardness remains unaffected until 80% replacement of hydroxyl groups with fluoride, after which the hardness rapidly increases. The elastic modulus increases linearly with fluoride content. Fracture toughness is improved with fluoride incorporation into the lattice and reaches a peak of 1.8 for a 95% dense sintered pellet with a 60% fluoride replacement, followed by a rapid decrease at higher fluoride concentrations. The brittleness index is lowered to a minimum at 60%, after which a rapid increase occurs. High fluoride levels are unfavourable from a mechanical perspective, are not recommended for biomaterials, and can lead to a higher incidence of fracture where sodium fluoride, for treatment of osteoporosis, may produce a highly fluoridated hydroxyapatite.

The growing necessity of biomaterials has increased the interest in calcium phosphates, particularly apatites. Small differences in stoichiometry, crystallinity, morphology, etc. could contribute to the different clinical behaviors observed, so perfect control of the synthesis parameters and their influence in the characteristics of the samples is a must. In the present work, a crystallization set able to produce massive and reproducible quantities of different calcium phosphates is presented. Apatites with different stoichiometries and morphologies are prepared, and the effects of varying synthesis conditions are analyzed. Temperatures in the range 25−37 °C are necessary to obtain apatites with crystal sizes in the range of adult human bone. Longer reaction times produce increased Ca/P ratios. Aging of the precipitated powder can lead to the incorporation of minor quantities of carbonate. It is possible to force the incorporation of carbonate ions into the apatitic structure without introducing monovalen...

The preparation of silica-alginate hybrid hydrogels by a sol-gel route is proposed in this work. The in-situ synthesis of silica networks from tetraethoxysilane (TEOS) and aminopropyltriethoxysilane (APTES) precursors in an alginate matrix is assayed. The experimental parameters were analyzed in three consecutive stages to obtain hybrid materials with specific properties. Stage 1: effect of water and catalyst ratios. Stage 2: effect of the inorganic precursor’s ratio. Stage 3: effect of concentration of the alginate solution. The hydrolysis-condensation reactions of the silica precursors were regulated by the alginate concentration, the silica precursor nature, and the HCl/inorganic/H2O ratio. Hybrids prepared with both silica precursors generate longer silica chains. High alginate amounts increase the storage modulus of synthesized hybrids, and high catalyst ratios reduce their stability. Compositions with alginate content of 5 and 8 (wt/v)%, TEOS/APTES weight ratio of 74/26, and without catalyst are suitable to evaluation for their application in tissue engineering., Instituto Politécnico Nacional,México (IPN-SIP 20196660 and IPN-SIP 20201294).AEI/FEDER, UE (DPI2017-90147-R). Financial support from CONACYT scholarship.