Search

Amino-terminated surfaces can be effectively obtained by means of silanizing agents, realizing surfaces suitable for the purification of biomarkers of several pathologies. Since the level of biomarkers, such as microRNAs and cell-free DNA, into circulation may be extremely low, new and ameliorated capturing molecules and protocols are highly required. In this work, a new silane, acetone-imine propyl trimethoxysilane (AIPTMS), is synthesized with a simple and elegant reaction, via the nucleophilic addition of the primary amino group to the carbonyl group of acetone. AIPTMS and APTMS were used to silanize silicon oxide surfaces, which were characterized chemically (XPS) and morphologically (AFM). The two types of surfaces were chemically similar, but behaved very differently both for surface morphology and functional properties. The AIPTMS-modified surface was indeed very smooth and homogeneous with respect to the APTMS-modified surface. Moreover, the AIPTMS surface captured larger amounts of nucleic acids almost immediately after preparation, while APTMS-based functional surfaces needed longer time to reach comparable efficiency. AIPTMS shows several advantages over standard aminosilanes, as it realizes a more homogeneous surface coverage that, in turn, produces an improved response towards the capture of nucleic acids. AIPTMS is a very promising reagent for the reliable and reproducible preparation of active biofunctional surfaces for the purification and analysis of circulating biomarkers.

Polydimethylsiloxane (PDMS) is a well-known biocompatible polymer employed for many applications in the biomedical field. In this study, the biocompatibility and versatility of PDMS was tested setting up a microdevice devoted to the purification and analysis of nucleic acids. The PDMS microdevice was demonstrated to successfully fulfill all requirements of genetic analyses such as genotyping and pathogen DNA identification both in multiplex and real-time PCR, suggesting the possibility to carry out a molecular test directly on-chip. Moreover, the PDMS microdevice was successfully applied to the purification and detection of disease biomarkers, such as microRNAs related to cancer or heart disease. On-chip microRNA purification was demonstrated starting from clinically relevant samples, i.e. plasma, serum, tissue biopsies. Significantly, the purification and the transcription of microRNA into cDNA occur in the same PDMS chamber, saving time and labor for the overall analysis. Again, the PDMS microdevice was confirmed as a notable candidate for compact, rapid, easy-to-use molecular tests.

A specific aptameric sequence has been immobilized on short polyethyleneglycol (PEG) interface on gold nano-film deposited on a D-shaped plastic optical fiber (POFs) probe, and the protein binding has been monitored exploiting the very sensitive surface plasmon resonance (SPR) phenomenon. The receptor-binding domain (RBD) of the SARS-CoV-2 spike glycoprotein has been specifically used to develop an aptasensor. Surface analysis techniques coupled to fluorescence microscopy and plasmonic analysis have been utilized to characterize the biointerface. Spanning a wide protein range (25 ÷ 1000 nM), the SARS-Cov-2 spike protein was detected with a Limit of Detection (LoD) of about 37 nM. Different interferents (BSA, AH1N1 hemagglutinin protein and MERS spike protein) have been tested confirming the specificity of our aptasensor. Finally, a preliminary test in diluted human serum encouraged its application in a point-of-care device, since POF-based aptasensor represent a potentially low-cost compact biosensor, characterized by a rapid response, a small size and could be an ideal laboratory portable diagnostic tool., Graphical abstract Image 1

Extracellular vesicles (EVs) are membranous structures that cells massively release in extracellular fluids. EVs are cargo of cellular components such as lipids, proteins, and nucleic acids that can work as a formidable source in liquid biopsy studies searching for disease biomarkers. We recently demonstrated that nickel-based isolation (NBI) is a valuable method for fast, efficient, and easy recovery of heterogeneous EVs from biological fluids. NBI exploits nickel cations to capture negatively charged vesicles. Then, a mix of balanced chelating agents elutes EVs while preserving their integrity and stability in solution. Here, we describe steps and quality controls to functionalize a matrix of agarose beads, obtain an efficient elution of EVs, and extract nucleic acids carried by them. We demonstrate the versatility of NBI method in isolating EVs from media of primary mouse astrocytes, from human blood, urine, and saliva processed in parallel, as well as outer membrane vesicles (OMVs) from cultured Gram-negative bacteria.

We report a comprehensive study of the biocompatibility and neurocompatibility of titanium dioxide films (TiO2) prepared by Pulsed Microplasma Cluster Source (PMCS). This technique uses supersonic pulsed beams seeded by clusters of the metal oxide synthesized in a plasma discharge. The final stoichiometry of the TiO2 thin films is tuned changing the gas mixture, achieving stoichiometric or oxygen overstoichiometric films. All the films showed consistent biocompatibility and a spontaneous absorption of poly-d-lysine (PDL) that favors the adhesion and growth of murine cortical neurons. Moreover, the bioelectrical activity of the neuronal culture grown on the TiO2 film can be modulated by changing the chemistry of the surface. This work paves the way to develop a bio-hybrid neuromorphic device, where viable nerve cells are grown directly over a titanium dioxide film showing a network of memristors.

Background Extracellular vesicles (EVs) are secreted membranous particles intensively studied for their potential cargo of diagnostic markers. Efficient and cost-effective isolation methods need to be established for the reproducible and high-throughput study of EVs in the clinical practice. Methods We designed the nickel-based isolation (NBI) to rapidly isolate EVs and combined it with newly-designed amplified luminescent proximity homogeneous assay or digital PCR to detect biomarkers of clinical utility. Findings From plasma of 46 healthy donors, we systematically recovered small EV (~250 nm of mean diameter; ~3 × 1010/ml) and large EV (~560 nm of mean diameter; ~5 × 108/ml) lineages ranging from 50 to 700 nm, which displayed hematopoietic/endothelial cell markers that were also used in spike-in experiments using EVs from tumor cell lines. In retrospective studies, we detected picomolar concentrations of prostate-specific membrane antigen (PSMA) in fractions of EVs isolated from the plasma of prostate cancer patients, discriminating them from control subjects. Directly from oil-encapsulated EVs for digital PCR, we identified somatic BRAF and KRAS mutations circulating in the plasma of metastatic colorectal cancer (CRC) patients, matching 100% of concordance with tissue diagnostics. Importantly, with higher sensitivity and specificity compared with immuno-isolated EVs, we revealed additional somatic alterations in 7% of wild-type CRC cases that were subsequently validated by further inspections in the matched tissue biopsies. Interpretation We propose NBI-combined approaches as simple, fast, and robust strategies to probe the tumor heterogeneity and contribute to the development of EV-based liquid biopsy studies. Fund Associazione Italiana per la Ricerca sul Cancro (AIRC), Fondazione Cassa di Risparmio Trento e Rovereto (CARITRO), and the Italian Ministero Istruzione, Universita e Ricerca (Miur).

This study explores the feasibility to use electroconductive Ti-doped polycrystalline diamond layers as scaffolds for tissue engineering. The synthesis of the diamond-based materials is accomplished in a HFCVD reactor where Ti(IV) acetyl acetonate powders are delivered by N2 fluxes to the growing diamond phase. In-depth investigations (Raman spectroscopy, SEM, AFM, XRD, XPS) allowed the characterization of the morphological/structural/compositional features and the properties of charge transport (KPFM, I-V) induced in the diamond layers by the incorporation of Ti-species. The bioactivity of the Ti-doped diamond surface was verified investigating the growth of MG-63 osteoblast-like cells by using MTT assays and confocal microscopy. The study evidenced a net increase of cell replication rate on diamond scaffolds after 4 days of incubation. After 6-days incubation, the cell growth on the Ti-doped diamond scaffolds increased up to 150% compared with the reference polystyrene tissue culture vessel, with a dominant presence of cells in active division. The cell behavior is discussed and related to the structural and functional surface properties of the Ti-diamond systems, acting as bioactive platforms able to offer an extremely beneficial environment for cell proliferation and viability. © 2020 Elsevier B.V.

The detection of low abundant biomarkers, such as circulating microRNAs, demands innovative detection methods with increased resolution, sensitivity and specificity. Here, a biofunctional surface was implemented for the selective capture of microRNAs, which were detected through fluorescence enhancement directly on a photonic crystal. To set up the optimal biofunctional surface, epoxy-coated commercially available microscope slides were spotted with specific anti-microRNA probes. The optimal concentration of probe as well as of passivating agent were selected and employed for titrating the microRNA hybridization. Cross-hybridization of different microRNAs was also tested, resulting negligible. Once optimized, the protocol was adapted to the photonic crystal surface, where fluorescent synthetic miR-16 was hybridized and imaged with a dedicated equipment. The photonic crystal consists of a dielectric multilayer patterned with a grating structure. In this way, it is possible to take advantage from both a resonant excitation of fluorophores and an angularly redirection of the emitted radiation. As a result, a significant fluorescence enhancement due to the resonant structure is collected from the patterned photonic crystal with respect to the outer non-structured surface. The dedicated read-out system is compact and based on a wide-field imaging detection, with little or no optical alignment issues, which makes this approach particularly interesting for further development such as for example in microarray-type bioassays. (C) 2016 Elsevier B.V. All rights reserved.

In this paper, we described a versatile two steps approach for the realization of silica inverse opals functionalized with DNA-aptamers labelled with Cy3 fluorophore. The co-assembly method was successfully employed for the realization of high quality inverse silica opal, whilst the inverse network was functionalized via epoxy chemistry. Morphological and optical assessment revealed the presence of large ordered domains with a transmission band gap depth of 32%, after the functionalization procedure. Finite Difference Time-Domain (FDTD) simulations confirmed the high optical quality of the inverse opal realized. Photoluminescence measurements evidenced the effective immobilization of DNA-aptamer molecules labelled with Cy3 throughout the entire sample thickness. This assumption was verified by the inhibition of the fluorescence of Cy3 fluorophore tailoring the position of the photonic band gap of the inverse opal. The modification of the fluorescence could be justified by a variation in the density of states (DOS) calculated by the Plane Wave Expansion (PWE) method. Finally, the development of the aforementioned approach could be seen as proof of the concept experiment, suggesting that this type of system may act as a suitable platform for the realization of fluorescence-based bio-sensors.

Topology affects physical and biological properties of DNA and impacts fundamental cellular processes, such as gene expression, genome replication, chromosome structure and segregation. In all organisms DNA topology is carefully modulated and the supercoiling degree of defined genome regions may change according to physiological and environmental conditions. Elucidation of structural properties of DNA molecules with different topology may thus help to better understand genome functions. Whereas a number of structural studies have been published on highly negatively supercoiled DNA molecules, only preliminary observations of highly positively supercoiled are available, and a description of DNA structural properties over the full range of supercoiling degree is lacking. Atomic Force Microscopy (AFM) is a powerful tool to study DNA structure at single molecule level. We here report a comprehensive analysis by AFM of DNA plasmid molecules with defined supercoiling degree, covering the full spectrum of biologically relevant topologies, under different observation conditions. Our data, supported by statistical and biochemical analyses, revealed striking differences in the behavior of positive and negative plasmid molecules.

The demand of miniaturized, accurate and robust micro-tools for minimally invasive surgery or in general for micro-manipulation, has grown tremendously in recent years. To meet this need, a new-concept comb-driven microgripper was designed and fabricated. Two microgripper prototypes differing for both the number of links and the number of conjugate surface flexure hinges are presented. Their design takes advantage of an innovative concept based on the pseudo-rigid body model, while the study of microgripper mechanical potentialities in different configurations is supported by finite elements' simulations. These microgrippers, realized by the deep reactive-ion etching technology, are intended as micro-tools for tissue or cell manipulation and for minimally invasive surgery; therefore, their biocompatibility in terms of protein fouling was assessed. Serum albumin dissolved in phosphate buffer was selected to mimic the physiological environment and its adsorption on microgrippers was measured. The presented microgrippers demonstrated having great potential as biomedical tools, showing a modest propensity to adsorb proteins, independently from the protein concentration and time of incubation.

The biocompatibility of an implant depends upon the material it is composed of, in addition to the prosthetic device's morphology, mechanical and surface properties. Properties as porosity and pore size should allow, when required, cells penetration and proliferation. Stiffness and strength, that depend on the bulk characteristics of the material, should match the mechanical requirements of the prosthetic applications. Surface properties should allow integration in the surrounding tissues by activating proper communication pathways with the surrounding cells. Bulk and surface properties are not interconnected, and for instance a bone prosthesis could possess the necessary stiffness and strength for the application omitting out prerequisite surface properties essential for the osteointegration. In this case, surface treatment is mandatory and can be accomplished using various techniques such as applying coatings to the prosthesis, ion beams, chemical grafting or modification, low temperature plasma, or a combination of the aforementioned. Low temperature plasma-based techniques have gained increasing consensus for the surface modification of biomaterials for being effective and competitive compared to other ways to introduce surface functionalities. In this paper we review plasma processing techniques and describe potentialities and applications of plasma to tailor the interface of biomaterials.

A reliable clinical assay based on circulating microRNAs (miRNAs) as biomarkers is highly required. Microdevices offer an attractive solution as a fast and inexpensive way of concentrating these biomarkers from a low sample volume. A previously developed polydimethylsiloxane (PDMS) microdevice able to purify and detect circulating miRNAs was here optimized. The optimization of the morphological and chemical surface properties by nanopatterning and functionalization is presented. Surfaces were firstly characterized by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), fluorescamine assay and s-SDTB (sulphosuccinimidyl-4-o-(4,4-dimethoxytrityl) butyrate) assay and subsequently tested for their capacity to adsorb a fluorescent miRNA. From our analysis, modification of surface charge with 0.1% APTMS ((3-Aminopropyl)trimethoxysilane) and 0.9% PEG-s (2-[Methoxy-(polyethyleneoxy)propyl]trimethoxysilane) performed at 60 °C for 10 min was identified as the best purification condition. Our optimized microdevice integrated with real-time PCR detection, was demonstrated to selectively purify both synthetic and natural circulating miRNAs with a sensitivity of 0.01 pM.

Many efforts have been spent in the last decade for the development of nanoscale synaptic devices integrated into neuromorphic circuits, trying to emulate the behavior of natural synapses. The study of brain properties with the standard approaches based on biocompatible electrodes coupled to conventional electronics, however, presents strong limitations, which in turn could be overcame by the in-situ growth of neuronal networks coupled to memristive devices. To meet this challenging task, here two different chips were designed and fabricated for culturing neuronal cells and sensing their electrophysiological activity. The first chip was designed to be connected to an external memristor, while the second chip was coated with TiO2 films owning memristive properties. The biocompatibility of chips was preliminary analyzed by culturing the hybrid motor-neuron cell line NSC-34 and by measuring the electrical activity of cells interfacing the chip with a standard patch-clamp setup. Next, neurons were seeded on chips and their activity measured with the same setup. For both cell types total current and voltage responses were evoked and recorded with optimal results with no breakdowns. In addition, an external stimulation was applied to cells through chip electrodes, being effective and causing no damage or pitfalls to the cells. Finally, the whole bio-hybrid system, i.e. the chip interconnected with a commercial memristor, was tested with promising results. Spontaneous electrical activity of neurons grown on the chip was indeed present and this signal was collected and sent to the memristor, changing its state. Taken together, we demonstrated the ability of memristor to work with a synaptic/plastic response together with natural systems, opening the way for the further implementation of basic computing elements able to perform both storage and processing of data, as in natural neurons.

MicroRNAs (miRNAs) are endogenous, small (18–24 nt), non-coding RNAs that regulate gene expression. Among miRNAs, those bound to the AGO2 protein are the functionally active fraction which mediates the cell regulatory processes and regulate messages exchanged by cells. Several methods have been developed to purify this fraction of microRNAs, such as immunoprecipitation and immunoprecipitation-derived techniques. However, all these techniques are generally recognized as technically complicated and time consuming. Here, a new bio-functional surface for the specific capture of AGO2-bound microRNAs is proposed. Starting from a silicon oxide surface, a protein A layer was covalently bound via epoxy chemistry to orient specific anti-AGO2 antibodies on the surface. The anti-AGO2 antibodies captured the AGO2 protein present in cell lysate and in human plasma. The AGO2-bound microRNAs were then released by enzymatic digestion and detected via RT-qPCR. Control surfaces were also prepared and tested. Every step in the preparation of the bio-functional surfaces was fully characterized from the chemical, morphological and functional point of view. The resulting bio-functional surface is able to specifically capture the AGO2-bound miRNAs from biologically-relevant samples, such as cell lysate and human plasma. These samples contain different proportions of AGO2-bound microRNAs, as reliably detected with the immunocapture method here proposed. This work opens new perspectives for a simple and faster method to isolate not only AGO2-bound microRNAs, but also the multiprotein complex containing AGO2 and miRNAs.

Hepatitis C virus (HCV) is one of the main causes of chronic liver disease worldwide. The diagnosis and monitoring of HCV infection is a crucial need in the clinical management. The conventional diagnostic technologies are challenged when trying to address molecular diagnostics, especially because they require a complex and time-consuming sample preparation phase. Here, a new concept based on surface functionalization was applied to viral RNA purification: first of all polydimethylsiloxane (PDMS) flat surfaces were modified to hold RNA adsorption. After a careful chemical and morphological analysis of the modified surfaces, the functionalization protocols giving the best RNA adsorbing surfaces were applied to PDMS microdevices. The functionalized microdevices were then used for RNA purification from HCV infected human plasma samples. RNA purification and RT were successfully performed in the same microdevice chamber, saving time of analysis, reagents, and labor. The PCR protocol for HCV cDNA amplification was also implemented in the microdevice, demonstrating that the entire process of HCV analysis, from plasma to molecular readout, could be performed on-chip. Not only HCV but also other microdevice-based viral RNA detection could therefore result in a successful Point-of-Care (POC) diagnostics for resource-limited settings.

Modern Lab-on-a-chip (LOC) platforms for genomic applications integrate several biological tasks in a single device. Combination of these processes into a single device minimizes sample loss and contamination problems as well as reducing analysis time and costs. Here we present a study of a microchip platform aimed at analyzing issues arising from the combination of different functions, such as DNA purification from blood, target amplification by PCR and DNA detection in a single silicon-based device. DNA purification is realized through two different strategies: 1) amine groups coating microchannel surfaces and 2) magnetic nanoparticles coated by chitosan. In the first strategy silicon/Pyrex microdevices coated with 3-aminopropyltriethoxysilane (APTES) or 3-2-(2-aminoethylamino)-ethylamino]-propyltrimethoxysilane (AEEA) were examined and their efficiency in human genomic DNA adsorption/desorption was evaluated. APTES treatment was the most suitable for the purification of a reasonable amount of DNA in a state suitable for the following PCR step. The second strategy has instead the main advantage of avoiding an elution step, since the DNA adsorbed on the magnetic nanoparticles can be used as PCR template. On-chip PCR was performed in a custom thermocycler, while the detection of PCR products was carried out by fluorescence reading. A complete genetic analysis was demonstrated on the monolithic silicon/Pyrex microchip, starting from less than 1 [Formula: see text]L of human whole blood and arriving at SNPs identification. The successful integration of DNA purification, amplification and detection on a single microdevice was proven without the need for biological passivation steps and possibly simplifying the realization of genomic detection devices.

This work presents the design, fabrication and characterization of a Si-based microseparation module for liquid chromatography (LC), targeted for agrofood applications and in particular for wine quality monitoring. The microsystem chip is a Silicon/Pyrex structure realized by anodic bonding. The basic Si-chip modules are an open tubular microcolumn with inlet/outlet for fluidic connections, a platinum heater and a Pt three-electrode amperometric sensor. Analytical calculations and finite element analysis have been performed to optimize the microcolumn design. Microchannels and inlet/outlet have been fabricated by deep reactive ion etching (DRIE) and tetra methyl ammonium hydroxide (TMAH) wet etching, respectively. The column has been functionalized with n-octyltriethoxysilane (C8-TEOS). Preliminary characterization tests of the microcolumn have been performed by evaluating the capability of the system to retain test solutions of acetic acid.

Pore formation of cellular membranes is an ancient mechanism of bacterial pathogenesis that allows efficient damaging of target cells. Several mechanisms have been described, however, relatively little is known about the assembly and properties of pores. Listeriolysin O (LLO) is a pH-regulated cholesterol-dependent cytolysin from the intracellular pathogen Listeria monocytogenes, which forms transmembrane β-barrel pores. Here we report that the assembly of LLO pores is rapid and efficient irrespective of pH. While pore diameters at the membrane surface are comparable at either pH 5.5 or 7.4, the distribution of pore conductances is significantly pH-dependent. This is directed by the unique residue H311, which is also important for the conformational stability of the LLO monomer and the rate of pore formation. The functional pores exhibit variations in height profiles and can reconfigure significantly by merging to other full pores or arcs. Our results indicate significant plasticity of large β-barrel pores, controlled by environmental cues like pH.

The introduction of new compact systems for sensitive, fast and simplified analysis is currently playing a substantial role in the development of point-of-care solutions aimed to assist both prognosis and diagnosis. Here we report a simple and low cost biosensor based on Surface Plasmon Resonance (SPR) taking advantage of a plastic optical fiber (POF) for the detection of Vascular endothelial growth factor (VEGF), selected as a circulating protein potentially associated with cancer. Our system is based onto two crucial aspects. By one hand, the functional layer which allows the transduction signal is based on DNA aptamers, short oligonucleotide sequences that bind to non-nucleic acid targets with high affinity and specificity. By the other hand, the light guiding structure is based on a POF with a planar gold layer as the sensing region, which is particularly suitable for bioreceptors implementation. The sensor revealed to be really useful in the interface characterization. The developed system is relatively easy to realize and could well address the development of a rapid, portable and low cost diagnostic platform, with a sensitivity in the nanomolar range.

The study of the adhesion of lipid vesicles on surfaces is of increasing interest in the field of medical implants and tissue engineering (protein-resistant surfaces), drug delivery, biosensors, and biochips. In this work, lipid coverage was developed from PEG-coated vesicles (with sizes from 100 to 300 nm) by covalently binding poly(ethylene glycol)-alpha-disteroylphosphatidylethanolamine-omega-benzotriazole carbonate (DSPE-PEG-BTC) molecules onto the surface amine groups by carbamate chemistry. Lipid surface density and the surface structure of multilamellar (MLVs) and extruded unilamellar (LUVs) vesicles deposited on three types of polystyrene (PS) well-plates were probed by fluorescence and atomic force microscopy (AFM) imaging. A significant difference in the vesicle surface coverage of PS substrates was observed with a substantial increase in lipid multilayers on the amine-enriched PS surface using both unilamellar and multilamellar vesicles.

A steady-state kinetic study of bovine serum amine oxidase activity was performed, over a wide range of pH values (5.4-10.2) and ionic strength (10-200 mM), using various (physiological and analogue) substrates as specific probes of the active-site binding region. Relatively small changes in k (cat) values (approx. one order of magnitude) accompanied by marked changes in K(m) and k(cat)/K(m) values (approx. six orders of magnitude) were observed. This behaviour was correlated with the presence of positively charged groups or apolar chains in the substrates. In particular, it was found that the docking of the physiological polyamines, i.e. spermidine and spermine, appears to be modulated by three amino acid residues of the active site, which we have named L(-)H(+), G(-)H(+) and IH(+), characterized by p K (a) values of 6.2+/-0.2 [Di Paolo, Scarpa, Corazza, Stevanato and Rigo (2002) Biophys. J. 83, 2231-2239], 8.2+/-0.3 and 7.8+/-0.4 respectively. The electrostatic interaction between the protonated substrates and the enzyme containing the residues L(-)H(+), G(-)H(+) and IH(+) in the deprotonated form, the on/off role of the IH(+) residue and the role of hydrophobic interactions with substrates characterized by apolar chains are discussed.

Perforin-mediated cytotoxicity is an essential host defense, in which defects contribute to tumor development and pathogenic disorders including autoimmunity and autoinflammation. How perforin (PFN) facilitates intracellular delivery of pro-apoptotic and inflammatory granzymes across the bilayer of targets remains unresolved. Here we show that cellular susceptibility to granzyme B (GzmB) correlates with rapid PFN-induced phosphatidylserine externalization, suggesting that pores are formed at a protein-lipid interface by incomplete membrane oligomers (or arcs). Supporting a role for these oligomers in protease delivery, an anti-PFN antibody (pf-80) suppresses necrosis but increases phosphatidylserine flip-flop and GzmB-induced apoptosis. As shown by atomic force microscopy on planar bilayers and deep-etch electron microscopy on mammalian cells, pf-80 increases the proportion of arcs which correlates with the presence of smaller electrical conductances, while large cylindrical pores decline. PFN appears to form arc structures on target membranes that serve as minimally disrupting conduits for GzmB translocation. The role of these arcs in PFN-mediated pathology warrants evaluation where they may serve as novel therapeutic targets.Cell Death and Differentiation advance online publication, 22 August 2014; doi:10.1038/cdd.2014.110.

There is an increasing interest in circulating microRNAs (miRNAs) as potential minimally invasive diagnostic biomarkers in oncology. Considerable efforts are being made in the development of lab-on-a-chip devices for biomedical applications to purify and detect miRNAs from biological fluids. Here, we report the development of an innovative polydimethylsiloxane (PDMS)-based parallel device whose internal surface can opportunely be functionalized with positively charged 3-aminopropyltriethoxysilane (APTES) alone or mixed with two different neutral poly(ethylene glycol) silanes (PEG-s). The differently functionalized internal surfaces of the PDMS chip were characterized with s-SDTB (sulfosuccinimidyl-4-o-(4,4-dimethoxytrityl) butyrate) and the portion of the surface able to adsorb a synthetic fluorescently labeled miRNA was determined. Interestingly, the adsorbed miRNA (both synthetic and cell supernatant-derived) was found mainly on the bottom surface of the chip and could be reverse transcribed into cDNA directly on the same PDMS chip used for its purification, saving hours with respect to the use of standard purification kits. We identified 0.1% APTES/0.9% PEG-silane as the most efficient PDMS functionalization to capture both synthetic and extracellular miRNA. Moreover, the amount of captured miRNA was increased by treating the cell supernatant with a commercially available lysis buffer for RNA extraction. We assessed that the available miRNA binding sites on the functionalized surface were efficiently saturated with only one incubation, shortening the time and greatly simplifying the protocol for miRNA purification from biological samples. Finally, the extracellular miRNA purification efficiency of the PDMS functionalized multichip determined via real-time quantitative polymerase chain reaction (RT-qPCR) was confirmed by droplet digital PCR (ddPCR) quantification. This work shows an innovative, rapid and easy to use microdevice for the purification and reverse transcription of circulating miRNAs, approaching the realization of diagnostic and prognostic oncomiR-based assays. This journal is

Whispering gallery mode resonators (WGMR), as silica microspheres, have been recently proposed as an efficient tool for the realisation of optical biosensors. In this work we present a functionalization procedure based on the DNA-aptamer sequence immobilization on WGMR, able to recognize specifically thrombin or VEGF protein, preserving a high Q factor. The protein binding was numerically modelled and optically characterized in terms of specificity in buffer solution or in 10% diluted human serum. The aptasensor was also chemically regenerated and tested again, demonstrating the reusability of our system.

Whispering gallery mode resonators (WGMR), as silica microspheres, have been recently proposed as an efficient tool for the realisation of optical biosensors. In this work we present a functionalization procedure based on the DNA-aptamer sequence immobilization on WGMR, able to recognize specifically thrombin or VEGF protein, preserving a high Q factor. The protein binding was optically characterized in terms of specificity in buffer solution or in 10% diluted human serum. Simulation of the protein flow was found in good agreement with experimental data. The aptasensor was also chemically regenerated and tested again, demonstrating the reusability of our system. (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Recently, superhydrophobic surfaces are gaining much interest because they may be employed in a series of applications, spanning from the realization of self-cleaning surfaces to microfluidics to special water-impermeable tissues allowing perspiration. It is well-known that superhydrophobicity strictly depends on the combination of superficial micro- and nano-structures. Then, key factors in the process of surface synthesis are the parameters which will define the surface conformation. In this work, we deal with the fabrication of polymer-based superhydrophobic surfaces. We developed a new method to have a good control of the structure of the synthesised surface. A high stability of the superhydrophobic character during time was obtained. Moreover, the synthesis process is green and easily transferable to industry for large production.

Bovine carbonmonoxy hemoglobin investigated with light scattering studies is found to dissociate from its native tetramer structure into dimers and monomers. The values of the hydrated tetramer radius, RT = 32.1 A, and the fractional dissociation vs pH, have been obtained at different ionic strengths from the autocorrelation function of the scattered light. The results suggest that a relevant contribution to Hb dissociation is due to electrostatic effects and, by means of a model derived by Tanford, it has been possible to predict the behavior of dissociation. Among the findings of this approach, we recall the estimates of the electrostatic energy contributions to Hb dissociation, up to ≃ GRT, and the predicted charge of tetrameric Hb vs pH, which agrees very well with the experimental data. © 1994 John Wiley & Sons, Inc.

In this paper we report an innovative use of Poly(DiMethyl)Siloxane (PDMS) to design a microfluidic device that combines, for the first time, in one single reaction chamber, DNA purification from a complex biological sample (blood) without elution and PCR without surface passivation agents. This result is achieved by exploiting the spontaneous chemical structure and nanomorphology of the material after casting. The observed surface organization leads to spontaneous DNA adsorption. This property allows on-chip complete protocols of purification of complex biological samples to be performed directly, starting from cells lysis. Amplification by PCR is performed directly on the adsorbed DNA, avoiding the elution process that is normally required by DNA purification protocols. The use of one single microfluidic volume for both DNA purification and amplification dramatically simplifies the structure of microfluidic devices for DNA preparation. X-Ray Photoelectron Spectroscopy (XPS) was used to analyze the surface chemical composition. Atomic Force Microscopy (AFM) and Field Emission Scanning Electron Microscopy (FESEM) were employed to assess the morphological nanostructure of the PDMS-chips. A confocal fluorescence analysis was utilized to check DNA distribution inside the chip.

The use of blood as DNA source to be employed in genetic analysis requires a purification process in order to remove proteins, lipids and any other contaminants, such as hemoglobin, which inhibit PCR. On the other hand, the increasing demand of miniaturized and automated biological tests able to reduce time and cost of analysis, requires the development and the characterization of materials aimed to perform the DNA purification processes in micro-devices. In this work we studied the interaction of DNA molecules with modified silicon based substrates, positively charged after deposition of a (3-aminopropyl)triethoxysilane (APTES) or 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane (AEEA) interfacial layer. The evaluation of the DNA adsorption and elution capacity of different substrates (thermally grown silicon oxide, silicon oxide obtained by plasma enhanced chemical vapour deposition, and Pyrex ® ) was studied taking into account the nature of the substrate and the effect of DNA length (in the 208–50,000 base pairs range). Main findings are that DNA elution capacity depends both on the utilized substrate and on the choice of the silanizing agent. Higher DNA recovery was obtained from AEEA-modified substrates, but the eluted DNA had different electrophoretic properties from native DNA. DNA with the same electrophoretic behaviour as genomic DNA was instead recovered from APTES-treated surfaces. Furthermore, the length of DNA present in the starting material strongly modulates the elution efficiency, longer DNA being released in a lesser amount, suggesting that opportunely modified surfaces could be used as systems for differential DNA separation.

In this study the initial reactions of different carbon-based materials with human blood were investigated by short-time exposure to platelet poor plasma (PPP). Extent of protein adsorption and conformational changes of proteins adsorbed on material surfaces are known to be keys factors affecting further biological reactions. Plasma protein adsorption on multi-walled carbon nanotubes (MWCNTs), highly oriented pyrolytic graphite (HOPG) and nanocrystalline graphite (NG) were investigated and the results obtained on these materials were compared with those obtained studying pyrolytic carbon (PyC), a material showing good anti-trombogenic properties. The quantification of adsorbed plasma proteins on sample surfaces was obtained by Micro BCA Protein Assay, while immunofluorescence analysis was employed to monitor the surface density and distribution of two selected proteins, namely fibrinogen (Fg) and Hageman factor (FXII), proteins playing a leading role in mediating platelet adhesion. The dependence of the biological response on the surface chemical and morphological properties were also investigated and data obtained using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM) are presented. After PPP incubation PyC is characterized by the presence of low level of whole proteins and FXII adsorption, in contrast to a high adhesion of Fg. Compared to PyC the analysis of the other carbon-based materials result in a higher whole protein adsorption with an increasing trend moving from MWCNTs, NG and HOPG respectively. The Fg surface density on PyC, NG and MWCNTs is about four times higher than on HOPG while only HOPG show a detectable fluorescent signal of FXII. If AFM data indicate that surface morphology does not play a crucial role in protein adhesion, XPS analysis show chemical differences that can be correlated with this biological response.

In this study we analyzed the surface properties of different silicon-based materials used for micro-electro-mechanical systems (MEMS) production, such as thermally grown silicon oxide, plasma-enhanced chemical vapor deposition (PECVD)-treated silicon oxide, reactive-ion etch (RIE)-treated silicon oxide, and Pyrex. Substrates were characterized by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) to define the surface chemical and morphological properties, and by fluorescence microscopy to directly assess the absorption of the different polymerase chain reaction (PCR) components. By using microchips fabricated with the same materials we investigated their compatibility with PCR reactions, exploiting the use of different enzymes and reagents or proper surface treatments. We established the best conditions for DNA amplification in silicon/Pyrex microdevices depending on the type of device and fabrication method used and the quality of reagents, rather than on the passivation treatment or increment in standard Taq polymerase concentration.

Two DNA plasmids, pEGF and pACL29, intercalated with ethidium bromide (EB), have been examined by circular dichroism (CD) and dynamic light scattering (DLS). CD and DLS data show significant changes when the EB/DNA (phosphates) ratio reaches a value of r approximately equal to 0.13. The translational and rotational diffusion coefficients, predicted assuming that plasmids can be described by a string of beads, and the CD spectrum, suggest that a transition from an interwound to a toroidal conformation is likely to occur.

Aminosilane self-assembled monolayers on silicon substrates have been prepared via a gas-phase procedure based on the consecutive reactions of the aminosilane precursor and water vapor. X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle measurements have been used to characterize the aminosilane layers. For comparison, substrates modified with aminosilane through a liquid-phase procedure have been prepared and characterized by means of the same techniques. The vapor-based procedure was found to yield more uniform layers characterized by fewer and smaller aggregates as compared with liquid-treated substrates. Grazing angles reflection Fourier transform infrared measurements were carried out on the vapor-treated substrates before and after water exposure to investigate the hydrolysis of the alkoxy groups and further reaction to form siloxane bonds. The surface density of amino groups, as estimated through a colorimetric method, is very similar for vapor- and liquid-treated substrates, suggesting a similar reactivity and accessibility of the functional groups on the surface.

In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff's base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.