Search

The inherent in vivo instability of oligonucleotides presents one of many challenges in the development of RNAi-based therapeutics. Chemical modification to the 5'-terminus serves as an existing paradigm which can make phosphorylated antisense strands less prone to degradation by endogenous enzymes. It has been recently shown that installation of 5'-cyclopropyl phosphonate on the terminus of an oligonucleotide results in greater knockdown of a targeted protein when compared to its unmodified phosphate derivative. In this paper we report the synthesis of a 5'-modified uridine.

A simple chiroptical solution for the absolute stereochemical determination for asymmetric phosphorus V stereocenters is presented. Strong coordination of the phosphorus oxide with the Zn-metallo center of the racemic host Zn-MAPOL 2 leads to an induced axial chirality of the host, yielding a strong ECCD signal. A mnemonic is proposed to correlate the asymmetry of the guest molecule with the observed ECCD signal.

A high-throughput screening (HTS) approach for simultaneous analysis and quantification of the percent conversion of up to 48 reactions has been developed using a thin-layer chromatography (TLC) imaging method. As a test-bed reaction, we monitored 48 thiol conjugate additions to a Meldrum’s acid derivative (1) in parallel using TLC. The TLC elutions were imaged using a cell phone and a LEGO(™) brick-constructed UV/vis light box. Further, a spotting device was constructed from LEGO(™) bricks that allows simple transfer of the samples from a well-plate to the TLC plate. Using software that was developed to detect “blobs” and report their intensity, we were able to quantitatively determine the extent of completion of the 48 reactions with one analysis.

We report the synthesis of a new perylene-diimide-based helical nanoribbon, which exhibits the largest molar electronic circular dichroism in the visible range of any molecule. This nanoribbon also displays a substantial increase in molar circular dichroism relative to a smaller helical analogue, even though they share a similar structure: both nanoribbons incorporate two conformationally dynamic double-[4]helicene termini and a rigid [6]helicene-based core within their helical superstructures. Using DFT and TDDFT calculations, we find that the double-[4]helicenes within both nanoribbons orient similarly in solution; as such, conformational differences do not account for the disparities in circular dichroism. Instead, our results implicate the configuration of the double-[6]helicene within the larger nanoribbon as the source of the observed chiroptical amplification.

Saturated cyclic amines (aza-cycles) are ubiquitous structural motifs found in pharmaceuticals, agrochemicals, and bioactive natural products. Given their importance, methods that directly functionalize aza-cycles are in high demand. Herein, we disclose a fundamentally different approach to functionalizing cyclic amines which relies on C─C cleavage and attendant cross-coupling. The initial functionalization step is the generation of underexplored N-fused bicyclo α-hydroxy-β-lactams under mild, visible light conditions using a Norrish–Yang process to affect α-functionalization of saturated cyclic amines. This approach is complementary to previous methods for the C─H functionalization of aza-cycles and provides unique access to various cross-coupling adducts. In the course of these studies, we have also uncovered an orthogonal, base-promoted opening of the N-fused bicyclo α-hydroxy-β-lactams. Computational studies have provided insight into the origin of the complementary C─C cleavage processes.

Despite their varied purposes, many indispensable molecules in medicine, materials, and asymmetric catalysis share a biaryl core. The necessity of joining arene building blocks to access these valuable compounds has inspired multiple approaches for biaryl bond formation and challenged chemists to develop increasingly concise and robust methods for this task. Oxidative coupling of two C–H bonds offers an efficient strategy for the formation of a biaryl C–C bond, however, fundamental challenges remain in controlling the reactivity and selectivity for uniting a given pair of substrates. Biocatalytic oxidative cross-coupling reactions have the potential to overcome limitations inherent to small molecule- mediated methods by providing a paradigm with catalyst-controlled selectivity. In this article, we disclose a strategy for biocatalytic cross-coupling through oxidative C–C bond formation using cytochrome P450 enzymes. We demonstrate the ability to catalyze cross-coupling reactions on a panel of phenolic substrates using natural P450 catalysts. Moreover, we engineer a P450 to possess the desired reactivity, site- selectivity, and atroposelectivity by transforming a low-yielding, unselective reaction into a highly efficient and selective process. This streamlined method for constructing sterically hindered biaryl bonds provides a programmable platform for assembling molecules with catalyst-controlled reactivity and selectivity.

Biocatalysis offers compelling advantages in synthesis, often becoming the method of choice based on sustainability, safety, and selectivity considerations. Despite these advantages, enzymes in synthesis are typically dedicated to functional group interconversions in linear synthetic sequences and have not been broadly integrated into the retrosynthetic logic for carbon skeleton assembly. In this article, we disclose a biocatalytic platform for fragment coupling to assemble target molecules convergently. Specifically, we report a strategy for biocatalytic phenolic cross-coupling through oxidative C–C bond formation. Using cytochrome P450 enzymes, we demonstrate the ability to catalyze cross-coupling reactions on a panel of phenolic substrates and further demonstrate the ability to tune these catalysts to possess the desired reactivity, site-, and atroposelectivity. This streamlined method for constructing sterically-hindered biaryl bonds provides an engineerable platform for assembling molecules with programmable catalyst-controlled reactivity and selectivity unprecedented with small molecule catalysts.

Maximal efficiency from enzyme cascades Enzymes are highly selective catalysts that can be useful for specific transformations in organic synthesis. Huffman et al. combined designer enzymes in a multistep cascade reaction (see the Perspective by O'Reilly and Ryan). The approach eliminates purification steps, recycles expensive cofactors, and couples favorable and unfavorable reactions. With the target molecule islatravir, an experimental HIV drug, they optimized five enzymes by directed evolution to be compatible with unnatural substrates and stable in the reaction conditions. Stereochemical purity was amplified at every enzymatic step, and the final synthesis was both atom economical and efficient. Science , this issue p. 1255 ; see also p. 1199

Selective access to a targeted isomer is often critical in the synthesis of biologically active molecules. Whereas small-molecule reagents and catalysts often act with anticipated site- and stereoselectivity, this predictability does not extend to enzymes. Further, the lack of access to catalysts that provide complementary selectivity creates a challenge in the application of biocatalysis in synthesis. Here, we report an approach for accessing biocatalysts with complementary selectivity that is orthogonal to protein engineering. Through the use of a sequence similarity network (SSN), a number of sequences were selected, and the corresponding biocatalysts were evaluated for reactivity and selectivity. With a number of biocatalysts identified that operate with complementary site- and stereoselectivity, these catalysts were employed in the stereodivergent, chemoenzymatic synthesis of azaphilone natural products. Specifically, the first syntheses of trichoflectin, deflectin-1a, and lunatoic acid A were achieved. In addition, chemoenzymatic syntheses of these azaphilones supplied enantioenriched material for reassignment of the absolute configuration of trichoflectin and deflectin-1a based on optical rotation, CD spectra, and X-ray crystallography.

A Rh-catalyzed enantioselective hydroamination of allylamines using a chiral BIPHEP-type ligand is reported. Enantioenriched 1,2-diamines are formed in good yields and with excellent enantioselectivities. A diverse array of nucleophiles and amine directing groups are demonstrated, including deprotectable motifs. Finally, the methodology was demonstrated toward the rapid synthesis of 2-methyl-moclobemide.

A simple chiroptical solution for the absolute stereochemical determination for asymmetric phosphorus V stereocenters is presented. Strong coordination of the phosphorus oxide with the Zn-metallo center of the racemic host Zn-MAPOL 2 leads to an induced axial chirality of the host, yielding a strong ECCD signal. A mnemonic is proposed to correlate the asymmetry of the guest molecule with the observed ECCD signal., A simple chiroptical solution for the absolute stereochemical determination for asymmetric phosphorus V stereocenters is presented.

Direct analyses of crude reaction mixtures have been carried out using molecular rotational resonance (MRR) spectroscopy, allowing identification and quantification of major and minor components without sample purification or reference standards., Direct analyses of crude reaction mixtures have been carried out using molecular rotational resonance (MRR) spectroscopy. Two examples are presented, a demonstration application in photocatalytic CH-arylation as well as generation of an intermediate in a natural product synthesis. In both cases, the reaction can proceed at more than one site, leading to a mixture of regioisomers that can be challenging to distinguish. MRR structural parameters were calculated for the low lying conformers for the desired compounds, and then compared to the experimental spectra of the crude mixtures to confirm the presence of these species. Next, quantitation was performed by comparing experimentally measured line intensities with simulations based on computed values for the magnitude and direction of the molecular dipole moment of each species. This identification and quantification was performed without sample purification and without isolated standards of the compounds of interest. The values obtained for MRR quantitation were in good agreement with the chromatographic values. Finally, previously unknown impurities were discovered within the photocatalytic CH-arylation work. This paper demonstrates the utility of MRR as a reaction characterization tool to simplify analytical workflows.

The determination of the enantiopurity and the concentration of chiral compounds by chiroptical sensing with molecular probes is increasingly attractive for high-throughput screening applications including streamlined asymmetric reaction development. In this study, we use stereodynamic aluminum biphenolate complexes for quantitative ee and concentration analysis of amino alcohols and α-hydroxy acids. An important feature of the tropos biphenolate ligand used is the presence of a phenylacetylene antenna for optimal chirality recognition and CD/UV responses at high wavelengths. The complexation-driven chirality amplification yields strong CD signals, which allows quantitative chiroptical sensing with good accuracy. We show that aluminate biphenolate sensors can exhibit linear and nonlinear correlations between the induced CD signals and the enantiomeric composition or concentration of the chiral substrate.

The voltage-gated sodium channel Nav1.7 is a genetically validated target for the treatment of pain with gain-of-function mutations in man eliciting a variety of painful disorders and loss-of-function mutations affording insensitivity to pain. Unfortunately, drugs thought to garner efficacy via Nav1 inhibition have undesirable side effect profiles due to their lack of selectivity over channel isoforms. Herein we report the discovery of a novel series of orally bioavailable arylsulfonamide Nav1.7 inhibitors with high levels of selectivity over Nav1.5, the Nav isoform responsible for cardiovascular side effects, through judicious use of parallel medicinal chemistry and physicochemical property optimization. This effort produced inhibitors such as compound 5 with excellent potency, selectivity, behavioral efficacy in a rodent pain model, and efficacy in a mouse itch model suggestive of target modulation.

The higher-order structure of a protein defines its function, and protein structural dynamics are often essential for protein binding and enzyme catalysis. Methods for protein characterization in solution are continuously being developed to understand and explore protein conformational changes with regards to function and activity. The goal of this study was to survey the use of combining HDX-MS global conformational screening with in silico modeling and continuous labeling peptide-level HDX-MS as an approach to highlight regions of interest within an enzyme required for biocatalytic processes. We surveyed in silico modeling correlated with peptide level HDX-MS experiments to characterize and localize transaminase enzyme structural dynamics at different conditions. This approach was orthogonally correlated with a global Size-Exclusion-HDX (SEC-HDX) screen for global conformational comparison and global alpha-helical content measurements by circular dichroism. Enzymatic activity and stereo-selectivity of transaminases were compared at different reaction-solution conditions that forced protein conformational changes by increasing acetonitrile concentration. The experimental peptide-level HDX-MS results demonstrated similar trends to the modeling data showing that certain regions remained folded in transaminases ATA-036 and ATA-303 with increasing acetonitrile concentration, which is also associated with shifting stereoselectivity. HDX modeling, SEC-HDX and CD experimental data showed that transaminase ATA-234 had the highest level of global unfolding with increasing acetonitrile concentration compared to the other two enzymes, which correlated with drastically reduced product conversion in transamination reaction. The combined HDX modeling/experimental workflow, based on enzymatic reactions studied at different conditions to induce changes in enzyme conformation, could be used as a tool to guide directed evolution efforts by identifying and focusing on the regions of an enzyme required for reaction product conversion and stereoselectivity.

Peptides and proteins commonly have complex structural landscapes allowing for transformation into a wide array of species including oligomers, aggregates, and fibrils. The formation of undesirable forms including aggregates and fibrils poses serious risks from the perspective of drug development and disease. Liraglutide, a GLP-1 agonist for the treatment of diabetes, is a conjugated peptide that forms oligomers that can be stabilized by pH and organic solvents. We have developed an analytical toolkit to overcome challenges inherent to Liraglutide's conjugated acyl chain and probed the impact its oligomers have on its physical stability. Our studies show that Liraglutide's oligomer states have significant and potentially detrimental impacts on its propensity to aggregate and form fibrils as well as its potency. Liraglutide delivered as a synthetic peptide is able to maintain its oligomerization state in dried lyophilized powders, acting as a memory effect from its synthetic process and purification. Through Liraglutide's oligomer memory effect, we demonstrate the importance and impact the process for synthetic peptides can have on drug development spanning from discovery to formulation development.

An extract of Eudistoma sp. provided eudistidine C (1), a heterocyclic alkaloid with a novel molecular framework. Eudistidine C (1) is a racemic natural product composed of a tetracyclic core structure further elaborated with a p-methoxyphenyl group and a phenol-substituted aminoimidazole moiety. This compound presented significant structure elucidation challenges due to the large number of heteroatoms and fully substituted carbons. These issues were mitigated by application of a new NMR pulse sequence (LR-HSQMBC) optimized to detect four- and five-bond heteronuclear correlations and the use of computer-assisted structure elucidation software. Synthesis of eudistidine C (1) was accomplished in high yield by treating eudistidine A (2) with 4(2-amino-1H-imidazol-5-yl)phenol (4) in DMSO. Synthesis of eudistidine C (1) confirmed the proposed structure and provided material for further biological characterization. Treatment of 2 with various nitrogen heterocycles and electron-rich arenes provided a series of analogues (5-10) of eudistidine C. Chiral-phase HPLC resolution of epimeric eudistidine C provided (+)-(R)-eudistidine C (1a) and (-)-(S)-eudistidine C (1b). The absolute configuration of these enantiomers was assigned by ECD analysis. (-)-(S)-Eudistidine C (1b) modestly inhibited interaction between the protein binding domains of HIF-1α and p300. Compounds 1, 2, and 6-10 exhibited significant antimalarial activity against Plasmodium falciparum.

Investigation of a novel amino-aza-benzimidazolone structural class of positive allosteric modulators (PAMs) of metabotropic glutamate receptor 2 (mGluR2) identified [2.2.2]-bicyclic amine 12 as an intriguing lead structure due to its promising physicochemical properties and lipophilic ligand efficiency (LLE). Further optimization led to chiral amide 18, which exhibited strong in vitro activity and attractive pharmacokinetic (PK) properties. Hypothesis-driven target design identified compound 21 as a potent, highly selective, orally bioavailable mGluR2 PAM, which addressed a CYP time-dependent inhibition (TDI) liability of 18, while maintaining excellent drug-like properties with robust in vivo activity in a clinically validated model of antipsychotic potential.

Light teaches (co)enzymes new tricks Light is widely used in organic synthesis to excite electrons in a substrate or catalyst, opening up reactive pathways to a desired product. Biology uses light sparingly in this way, but coenzymes such as flavin can be driven to excited states by light. Biegasiewicz et al. investigated this reactivity and found a suite of flavoenzymes that catalyze asymmetric radical cyclization when exposed to light. “Ene”-reductases, when reduced and illuminated, converted starting materials containing an α-chloroamide and an alkene into five-, six-, seven-, or eight-membered lactams. Different enzymes furnished different stereochemistry in the products, likely because of changes in active-site pocket geometry. Science , this issue p. 1166

This Perspective highlights the advances of optical methods for asymmetric reaction discovery. Optical analysis allows for the determination of absolute configuration, enantiomeric excess and reaction yield that is amenable to high-throughput experimentation. Thus, the synthetic organic community is encouraged to incorporate the methods discussed to expedite the development of high-yielding, enantioselective transformations.

We present here a new design motif for strained, conjugated macrocycles that incorporates two different aromatics into the cycle with an -A-B-A-B- pattern. In this study, we demonstrate the concept by alternating electron donors and acceptors in a conjugated cycle. The donor is a bithiophene, and the acceptor is a perylene diimide derivative. The macrocycle formed has a persistent elliptiform cavity that is lined with the sulfur atoms of the thiophenes and the π-faces of the perylene diimide. Due to the linkage of the perylene diimide subunits, the macrocycles exist in both chiral and achiral forms. We separate the three stereoisomers using chiral high-performance liquid chromatography and study their interconversion. The mechanism for interconversion involves an "intramolecular somersault" in which one of the PDIs rotates around its transverse axis, thereby moving one of its diimide heads through the plane of the cavity. These unusual macrocycles are black in color with an absorption spectrum that spans the visible range. Density functional theory calculations reveal a photoinduced electron transfer from the bithiophene to the perylene diimide.

Cryptospirolepine is the most structurally complex alkaloid discovered and characterized thus far from any Cryptolepis specie. Characterization of several degradants of the original, sealed NMR sample a decade after the initial report called the validity of the originally proposed structure in question. We now report the development of improved, homodecoupled variants of the 1,1- and 1,n-ADEQUATE (HD-ADEQUATE) NMR experiments; utilization of these techniques was critical to successfully resolving long-standing structural questions associated with crytospirolepine.

Novel bacterial topoisomerase inhibitors (NBTIs) represent a new class of broad-spectrum antibacterial agents targeting bacterial Gyrase A and ParC and have potential utility in combating antibiotic resistance. A series of novel oxabicyclooctane-linked NBTIs with new tricyclic-1,5-naphthyridinone left hand side moieties have been described. Compounds with a ( R )-hydroxy-1,5-naphthyridinone moiety ( 7 ) showed potent antibacterial activity (e.g., Staphylococcus aureus MIC 0.25 μg/mL), acceptable Gram-positive and Gram-negative spectrum with rapidly bactericidal activity. The compound 7 showed intravenous and oral efficacy (ED 50 ) at 3.2 and 27 mg/kg doses, respectively, in a murine model of bacteremia. Most importantly they showed significant attenuation of functional hERG activity (IC 50 >170 μM). In general, lower log D attenuated hERG activity but also reduced Gram-negative activity. The co-crystal structure of a hydroxy-tricyclic NBTI bound to a DNA-gyrase complex exhibited a binding mode that show enantiomeric preference for R isomer and explains the activity and SAR. The discovery, synthesis, SAR and X-ray crystal structure of the left-hand-side tricyclic 1,5-naphthyridinone based oxabicyclooctane linked NBTIs are described.

HPLC and HPLC-MS are powerful and wide ranging analytical tools employed in every aspect of modern chemical and biomedical research. The use of these tools is currently restricted to formal laboratory environments, partly due to cost and complexity but also owing to the special handling requirements for the solvents consumed and waste generated by these instruments. Ongoing innovations targeting the decrease in cost, size, and complexity of HPLC and HPLC-MS instrumentation raise the intriguing possibility that such tools may soon become both mobile and widespread in usage, breaking free of traditional laboratory boundaries. However, the dependence of these techniques on regulated organic solvents currently limits such mobility. In this study, we investigate the use of distilled alcohol spirits (cachaca, rum, vodka, aguardiente, etc.) as well as other household items typically available in a supermarket (vinegar, ammonia) as mobile phases and additives for carrying out HPLC and HPLC-MS experiments, showing...

Benzoic acid/ester/amide derivatives are common moieties in pharmaceutical compounds and present a challenge in positional isomer identification by traditional tandem mass spectrometric analysis. A method is presented for exploiting the gas-phase neighboring group participation (NGP) effect to differentiate ortho-substituted benzoic acid/ester derivatives with high resolution mass spectrometry (HRMS1). Significant water/alcohol loss (>30% abundance in MS1 spectra) was observed for ortho-substituted nucleophilic groups; these fragment peaks are not observable for the corresponding para and meta-substituted analogs. Experiments were also extended to the analysis of two intermediates in the synthesis of suvorexant (Belsomra) with additional analysis conducted with nuclear magnetic resonance (NMR), density functional theory (DFT), and ion mobility spectrometry-mass spectrometry (IMS-MS) studies. Significant water/alcohol loss was also observed for 1-substituted 1, 2, 3-triazoles but not for the isomeric 2-substituted 1, 2, 3-triazole analogs. IMS-MS, NMR, and DFT studies were conducted to show that the preferred orientation of the 2-substituted triazole rotamer was away from the electrophilic center of the reaction, whereas the 1-subtituted triazole was oriented in close proximity to the center. Abundance of NGP product was determined to be a product of three factors: (1) proton affinity of the nucleophilic group; (2) steric impact of the nucleophile; and (3) proximity of the nucleophile to carboxylic acid/ester functional groups.

© 2017 American Chemical Society. Computed descriptors for acyclic diaminocarbene ligands are developed in the context of a gold catalyzed enantioselective tandem [3,3]-sigmatropic rearrangement-[2+2]-cyclization. Surrogate structures enable the rapid identification of parameters that reveal mechanistic characteristics. The observed selectivity trends are validated in a robust multivariate analysis facilitating the development of a highly enantioselective process.

Aliphatic amines, oxygenated at remote positions within the molecule, represent an important class of synthetic building blocks to which there are currently no direct means of access. Reported herein is an efficient and scalable solution that relies upon decatungstate photocatalysis under acidic conditions using either H2 O2 or O2 as the terminal oxidant. By using these reaction conditions a series of simple and unbiased aliphatic amine starting materials can be oxidized to value-added ketone products. Lastly, NMR spectroscopy using in situ LED-irradiated samples was utilized to monitor the kinetics of the reaction, thus enabling direct translation of the reaction into flow.

The absolute configurations of the separated enantiomers of fluralaner, a racemic animal health product used to prevent fleas and ticks, have been assigned using vibrational circular dichroism (VCD). The crystallographic structure of the active enantiomer (+)-fluralaner has previously been shown to have the (S) configuration using small molecule crystallography. We sought a faster analytical method to determine the absolute configuration of the separated enantiomers. When comparing the measured IR (infrared) and VCD spectra, it is apparent that the amide carbonyl groups appear in the IR but are nearly absent in the VCD. Computational work to calculate the VCD and IR using in vacuo models, implicit solvation, and explicitly solvated complexes has implicated conformational averaging of the carbonyl VCD intensities.

The presence of dehalogenated impurities is often observed in halogen-containing pharmaceuticals, and can present a difficult analytical challenge, as the chromatographic behavior of the halogenated drug and the hydrogen-containing analog can be quite similar. In this study we describe the chromatographic separation and unambiguous identification of dehalogenation impurities or associated isomers in organohalogenated pharmaceuticals using UHPLC with a pentafluorophenyl column coupled with diode-array and high resolution electrospray ionization mass spectrometry detection (UHPLC-DAD-HRESIMS).

Imine-bond formation between a chiral amine analyte and 3-hydroxypyridine-2-carboxaldehyde (HCA) was used to create a fast and robust method for enantiopurity analysis. This approach showed good universality, and was applied to a variety of different classes of chiral amines. The sign of the measured CD signal was enantiospecific across the range of amines tested, allowing some confidence in absolute configuration determination. This technique was transitioned to an HPLC-CD detector to allow for rapid and automated sample introduction, while maintaining the level of accuracy noted for the standalone CD spectrophotometer. Finally, the enantiomeric purity of a series of crude reaction mixtures of synthetic amines produced by biocatalytic transamination was accurately determined using this approach.

The absolute configuration of several hydroxywarfarin isomers was assigned using a comparison of elution order on chiral stationary phases, optical rotation, and circular dichroism (CD) spectra, with confirmation of assignments made by comparison between experimental and calculated CD spectra and selective synthesis of hydroxywarfarin isomers from enantiopure warfarin using human liver microsomes. Chirality 26:95–101, 2014. © 2013 Wiley Periodicals, Inc.

Recent developments in fast chromatographic enantioseparations now make high throughput analysis of enantiopurity on the order of a few seconds achievable. Nevertheless, routine chromatographic determinations of enantiopurity to support stereochemical investigations in pharmaceutical research and development, synthetic chemistry and bioanalysis are still typically performed on the 5–20 min timescale, with many practitioners believing that sub-minute enantioseparations are not representative of the molecules encountered in day to day research. In this study we develop ultrafast chromatographic enantioseparations for a variety of pharmaceutically-related drugs and intermediates, showing that sub-minute resolutions are now possible in the vast majority of cases by both supercritical fluid chromatography (SFC) and reversed phase liquid chromatography (RP-LC). Examples are provided illustrating how such methods can be routinely developed and used for ultrafast high throughput analysis to support enantioselective synthesis investigations.

Imine-bond formation between chiral amines and commercially available 3-hydroxypyridine-2-carboxaldehyde (HCA) was exploited for rapid determination of stereochemical composition. Chiral supercritical fluid chromatography (SFC) screening of the derivatized imine compounds led to the elucidation of multiple combinations of mobile and stationary phases that gave resolution of all members of a series of chiral amines. The first eluting enantiomer was generally the derivative of the (R)-amine enantiomer across the series that was studied, indicating that the imine formed from the (S)-amine has more favorable interaction with the chiral stationary phase of the column. These conditions were then applied to more challenging compounds, namely amino alcohols and diastereomers possessing more than one stereocenter. The approach was utilized to monitor stereoselective biocatalytic transamination and assign the absolute configuration of the enantiomeric products. Finally, hydrolysis of the imine bond of the derivative was shown to generate enantiopure amine starting materials without racemization. This further highlights the value of this approach for creating readily reversed derivatives that enhance chromatographic separation and aid in the determination of absolute configuration.

Using hydrostatic pressure to induce protein conformational changes can be a powerful tool for altering the availability of protein reactive sites and for changing the selectivity of enzymatic reactions. Using a pressure apparatus, it has been demonstrated that hydrostatic pressure can be used to modulate the reactivity of lysine residues of the protein ubiquitin with a water-soluble amine-specific homobifunctional coupling agent. Fewer reactive lysine residues were observed when the reaction was carried out under elevated pressure of 3 kbar, consistent with a pressure-induced conformational change of ubiquitin that results in fewer exposed lysine residues. Additionally, modulation of the stereoselectivity of an enzymatic transamination reaction was observed at elevated hydrostatic pressure. In one case, the minor diasteromeric product formed at atmospheric pressure became the major product at elevated pressure. Such pressure-induced alterations of protein reactivity may provide an important new tool for enzymatic reactions and the chemical modification of proteins.

Molecular hosts capable of chiroptical sensing of complexed guest molecules offer an attractive alternative to conventional methods for the analysis of the absolute configuration and enantiopurity. Sensors based on the Pfeiffer effect rely on complexation-driven asymmetric transformation of the first kind and can produce a chiroptical signal against an otherwise null background. To be most effective, the wavelength of the induced chiroptical sensor readout should be free and clear of interfering signals coming from the sample under investigation. In this study, we report the introduction of stereodynamic zinc complexes of antenna biphenols, a new class of sensors bearing antenna-like appendages that can extend the wavelength of the chiroptical signal while also improving enantioselective guest recognition.

The association between an achiral copper(II) host (1) and chiral carboxylate guests was studied using exciton-coupled circular dichroism (ECCD). Enantiomeric complexes were created upon binding of the enantiomers of the carboxylate guests to the host, and the sign of the resultant CD signal allowed for determination of the configuration of the studied guest. The difference in magnitudes and shapes of the CD signals, in conjunction with linear discriminant analysis (LDA), allowed for the identity of the guest to be determined successfully. A model was created for the host:guest complexes which successfully predicts the sign of the observed CD signal. Further, Taft parameters were used in the model, leading to rationalization of the observed magnitudes of the CD signals. Finally, the enantiomeric excess (ee) of unknown samples of three chiral carboxylic acid guests was determined with an average absolute error of ± 3.0%.

A pattern-based recognition approach for the rapid determination of the identity, concentration, and enantiomeric excess of chiral vicinal diols, specifically threo diols, has been developed. A diverse enantioselective sensor array was generated using three chiral boronic acid receptors and three pH indicators. The optical response produced by the sensor array was analyzed by two pattern-recognition algorithms: principal component analysis and artificial neural networks. Principal component analysis demonstrated good chemoselective and enantioselective separation of the analytes, and an artificial neural network was used to accurately determine the concentrations and enantiomeric excesses of five unknown samples with an average absolute error of +/-0.08 mM in concentration and 3.6% in enantiomeric excess. The speed of the analysis was enhanced by using a 96-well plate format, portending applications in high-throughput screening for asymmetric-catalyst discovery. X-ray crystallography and (11)B NMR spectroscopy was utilized to study the enantioselective nature of the boronic acid host 2.

The aim of this chapter is to introduce the reader to differential sensing, to detail the history of the electronic nose and tongue that led to the development of differential sensing, and to provide a spectrum of examples where differential sensing has been employed to classify and/or detect single analytes and mixtures of analytes. Using the information presented in this chapter, we hope to provide a solid background for the reader so that the differential sensing approach can be extrapolated to any desired chemical sensing purpose. Keywords: differential sensing; array sensing; pattern recognition; sensing; electronic nose and tongue; amino acids; nucleotides; peptides; proteins; ion mixtures; beverages; biomolecules

The principles of supramolecular chemistry have successfully permeated through a broad range of organic chemistry subdisciplines. One subdiscipline that is not routinely associated with supramolecular chemistry is that of organic synthetic methodology. Though sometimes indiscernible, non-bonded and bonding supramolecular interactions play a large role in chemical reactions and catalysis. Many synthetic methods hinge on the creation of anionic charge, albeit just partial, at some step during this process, and hence are prime targets for molecular recognition interactions. Examples are artificial enzymes, biomimetic catalysis, organocatalysis, and many of the catalysts that are derived from a combinatorial screen. Further, supramolecular chemistry is playing an increasingly large role in high-throughput analytical techniques. This tutorial review ties together supramolecular approaches to methodology creation, combinatorial screening, and analytical protocols. The goal is to show, and further predict, that supramolecular chemistry will continually increase its impact in organic synthetic methodology development.

Proline-catalyzed diastereoselective aminomethylation of aldehydes using a chiral iminium ion, generated from a readily prepared precursor, provides alpha-substituted-beta-amino aldehydes with 85:15 to 90:10 dr. The alpha-substituted-beta-amino aldehydes can be reduced to beta-substituted-gamma-amino alcohols, the major diastereomer of which can be isolated via crystallization or column chromatography. The amino alcohols are efficiently transformed to protected beta2-amino acids, which are valuable building blocks for beta-peptides, natural products, and other interesting molecules. Because conditions for the aminomethylation and subsequent reactions are mild, beta2-amino acid derivatives with protected functional groups in the side chain, such as beta2-homoglutamic acid, beta2-homotyrosine, and beta2-homolysine, can be prepared in this way. The synthetic route is short, and purifications are simple; therefore, this method enables the preparation of protected beta2-amino acids in useful quantities.

Proline-catalyzed diastereoselective aminomethylation of aldehydes using a chiral iminium ion, generated from a readily prepared precursor, provides alpha-substituted-beta-amino aldehydes with 85:15 to 90:10 dr. The alpha-substituted-beta-amino aldehydes can be reduced to beta-substituted-gamma-amino alcohols, the major diastereomer of which can be isolated via crystallization or column chromatography. The amino alcohols are efficiently transformed to protected beta2-amino acids, which are valuable building blocks for beta-peptides, natural products, and other interesting molecules. Because conditions for the aminomethylation and subsequent reactions are mild, beta2-amino acid derivatives with protected functional groups in the side chain, such as beta2-homoglutamic acid, beta2-homotyrosine, and beta2-homolysine, can be prepared in this way. The synthetic route is short, and purifications are simple; therefore, this method enables the preparation of protected beta2-amino acids in useful quantities.

The principles of supramolecular chemistry have successfully permeated through a broad range of organic chemistry subdisciplines. One subdiscipline that is not routinely associated with supramolecular chemistry is that of organic synthetic methodology. Though sometimes indiscernible, non-bonded and bonding supramolecular interactions play a large role in chemical reactions and catalysis. Many synthetic methods hinge on the creation of anionic charge, albeit just partial, at some step during this process, and hence are prime targets for molecular recognition interactions. Examples are artificial enzymes, biomimetic catalysis, organocatalysis, and many of the catalysts that are derived from a combinatorial screen. Further, supramolecular chemistry is playing an increasingly large role in high-throughput analytical techniques. This tutorial review ties together supramolecular approaches to methodology creation, combinatorial screening, and analytical protocols. The goal is to show, and further predict, that supramolecular chemistry will continually increase its impact in organic synthetic methodology development.

Tandem accelerators have been employed for ion implantation in the semiconductor industry. The advantages of tandem acceleration, such as reliability and simplicity, are well known. The limitations of these systems until the present have been beam current related. Tests of a new negative ion injector system based on charge exchange have shown its applicability in production MeV ion implantation systems. With a Na vapor charge exchange canal, measurements using mA beams of 45 keV 11 B + , 31 P + , and 75 As + projectiles have yielded negative equilibrium charge state fractions of 10, 21, and 15%, respectively. In conjunction with a high current positive ion source, several hundred μA of B − and > 1 mA of P − and As − may be produced. The increase in the angular divergence of the ion beams due to multiple scattering in the Na vapor has been found to be minimal.