Search

We present a generic workflow combining physiology-based computational modeling and in vitro data to assess the clinical cholestatic risk of different drugs systematically. Changes in expression levels of genes involved in the enterohepatic circulation of bile acids were obtained from an in vitro assay mimicking 14 days of repeated drug administration for 10 marketed drugs. These changes in gene expression over time were contextualized in a physiology-based bile acid model of glycochenodeoxycholic acid. The simulated drug-induced response in bile acid concentrations was then scaled with the applied drug doses to calculate the cholestatic potential for each compound. A ranking of the cholestatic potential correlated very well with the clinical cholestasis risk obtained from medical literature. The proposed workflow allows benchmarking the cholestatic risk of novel drug candidates. We expect the application of our workflow to significantly contribute to the stratification of the cholestatic potential of new drugs and to support animal-free testing in future drug development.

Many wild type Pseudomonas strains have the potential to contribute to the valorization of lignin in future biorefineries. Through a robust aromatic catabolism, i.e., biofunneling capacity, they can ease the inherent aromatic heterogeneity found in lignin hydrolysates and accumulate naturally marketable biopolymers like mcl-polyhydroxyalkanoate (mcl-PHA) under nitrogen limitation. Besides a comparative strain evaluation, we present fundamental research on the funneling of aromatic mixtures under specific bioprocess conditions to improve biocatalytic lignin valorization. For the most robust and best performing strain, P. putida KT2440, we improve the mcl-PHA accumulation from a defined aromatic mixture of p-coumarate, ferulate, and benzoate under technically relevant conditions by up to 40% by tailoring the nitrogen and oxygen supply. The highest mcl-PHA concentration (582 +/- 41 mg L-1) was obtained for a C/N ratio of 60 for oxygen-unlimited conditions (oxygen transfer rate >20 mmol L-1 h(-1)). In contrast, aromatic intermediates accumulated under oxygen-limited conditions at oxygen transfer rates below 10 mmol L-1 h(-1). The experimental conditions were scalable into a 1L stirred tank bioreactor. This study contributes to deepening our understanding of the biocatalytic capability of promising Pseudomonas strains toward downstream microbial conversions of lignin aromatics for future biorefinery applications.

Physiologically based pharmacokinetic (PBPK) models have been proposed as a tool for more accurate individual pharmacokinetic (PK) predictions and model‐informed precision dosing, but their application in clinical practice is still rare. This study systematically assesses the benefit of using individual patient information to improve PK predictions. A PBPK model of caffeine was stepwise personalized by using individual data on (1) demography, (2) physiology, and (3) cytochrome P450 (CYP) 1A2 phenotype of 48 healthy volunteers participating in a single‐dose clinical study. Model performance was benchmarked against a caffeine base model simulated with parameters of an average individual. In the first step, virtual twins were generated based on the study subjects' demography (height, weight, age, sex), which implicated the rescaling of average organ volumes and blood flows. The accuracy of PK simulations improved compared with the base model. The percentage of predictions within 0.8‐fold to 1.25‐fold of the observed values increased from 45.8% (base model) to 57.8% (Step 1). However, setting physiological parameters (liver blood flow determined by magnetic resonance imaging, glomerular filtration rate, hematocrit) to measured values in the second step did not further improve the simulation result (59.1% in the 1.25‐fold range). In the third step, virtual twins matching individual demography, physiology, and CYP1A2 activity considerably improved the simulation results. The percentage of data within the 1.25‐fold range was 66.15%. This case study shows that individual PK profiles can be predicted more accurately by considering individual attributes and that personalized PBPK models could be a valuable tool for model‐informed precision dosing approaches in the future.

Soft matter 17(11), 3191-3206 (2021). doi:10.1039/D0SM01934H, Published by Royal Society of Chemistry, London

We present an integrated process for in situ CO2 hydrogenation during bioethanol production combining bio- and chemo-catalysis. The biphasic catalytic system comprises an aqueous whole-cell fermentation broth and a tailored organometallic catalyst in an organic phase. Glucose is converted to ethanol and the by-product CO2 is simultaneously upgraded to formic acid in a single reactor unit. Under optimized conditions, 26% of the generated CO2 was hydrogenated directly.

Biotechnology for biofuels 13(1), 1-18 (2020). doi:10.1186/s13068-020-01835-4, Published by BioMed Central, London

The industrially relevant biopolymer poly-γ-glutamic acid (γ-PGA) is commonly synthesized using glycerol, citrate, and glutamic acid as carbon sources. In this study, two strains capable of utilizing glucose as sole carbon source for γ-PGA synthesis were constructed. Efficient γ-PGA production was achieved with derivatives of the well-investigated laboratory strain Bacillus subtilis 168, by replacing the native promoter of the PGA synthetase operon with the strong constitutive promoter Pveg or with the xylose-inducible promoter Pxyl. The carbon yield for γ-PGA increased by 129% to 0.131 C-mol C-mol−1 when using glucose as the sole substrate compared to the conventional carbon source mixture glycerol, citrate, and glutamic acid. The characterization of the produced γ-PGA demonstrated a time-dependent molecular weight of 1180–1850 kDa and a d -glutamic acid monomer content of 49–62%. To elucidate the consequences of γ-PGA production, we characterized the engineered strain by metabolomics. While the metabolite concentrations in the TCA cycle leading up to 2-oxoglutarate decreased in γ-PGA producer strains, the glutamic acid concentration was constant, despite the drastic increase in glutamic acid demand. The results are discussed in the context of metabolic regulation and future metabolic engineering strategies to enhance precursor supply for γ-PGA synthesis from glucose.

A key aspect of the transformation of the economic sector towards a sustainable bioeconomy is the development of environmentally friendly alternatives for hitherto used chemicals, which have negative impacts on environmental health. However, the implementation of an ecotoxicological hazard assessment at early steps of product development to elaborate the most promising candidates of lowest harm is scarce in industry practice. The present article introduces the interdisciplinary proof-of-concept project GreenToxiConomy, which shows the successful application of a Green Toxicology strategy for biosurfactants and a novel microgel-based pesticide release system. Both groups are promising candidates for industrial and agricultural applications and the ecotoxicological characterization is yet missing important information. An iterative substance- and application-oriented bioassay battery for acute and mechanism-specific toxicity within aquatic and terrestrial model species is introduced for both potentially hazardous materials getting into contact with humans and ending up in the environment. By applying in silico QSAR-based models on genotoxicity, endocrine disruption, skin sensitization and acute toxicity to algae, daphnids and fish individual biosurfactants resulted in deviating toxicity, suggesting a pre-ranking of the compounds. Experimental toxicity assessment will further complement the predicted toxicity to elaborate the most promising candidates in an efficient pre-screening of new substances.

Biotechnology & bioengineering 119(2), 376-387 (2021). doi:10.1002/bit.27992, Published by Wiley, New York, NY [u.a.]

The sequence of the promoter used to drive expression of glcDEF operon in the engineered strain MFL185 in the original article was incorrect. As described here, we performed additional experiments that indicate expression of this operon was increased in MFL185, as intended. Ultimately, this error is immaterial with respect to the findings and conclusions reported in the original article.

Poly-γ-glutamic acid (γ-PGA), which is produced by several Bacillus species, is a chiral biopolymer composed of D- and L-glutamate monomers and has various industrial applications. However, synthesized γ-PGA exhibits great structural diversity, and the structure must be controlled to broaden its industrial use. The biochemical pathways for γ-PGA production suggest that the polymer properties molecular weight (MW) and stereochemical composition are influenced by (1) the affinity of γ-PGA synthetase for the two alternative glutamate enantiomers and (2) glutamate racemase activity; hence, the availability of the monomers. In this study, we report tailor-made γ-PGA synthesis with B. subtilis by combining PGA synthetase and glutamate racemase genes from several Bacillus strains. The production of structurally diverse γ-PGA was thereby achieved. Depending on the PGA synthetase and glutamate racemase origins, the synthesized γ-PGA contained 3–60% D-glutamate. The exchange of PGA synthetase changed the MW from 40 to 8500 kDa. The results demonstrate the production of low-, medium-, and high-MW γ-PGA with the same microbial chassis.

Pollution from ethylene glycol, and plastics containing this monomer, represent a significant environmental problem. The investigation of its microbial metabolism therefore provides insights into the environmental fate of this pollutant and also enables its utilization as a carbon source for microbial biotechnology. Here, we reveal the genomic and metabolic basis of ethylene glycol metabolism in Pseudomonas putida KT2440. Although this strain cannot grow on ethylene glycol as sole carbon source, it can be used to generate growth-enhancing reducing equivalents upon co-feeding with acetate. Mutants that utilize ethylene glycol as sole carbon source were isolated through adaptive laboratory evolution. Genomic analysis of these mutants revealed a central role of the transcriptional regulator GclR, which represses the glyoxylate carboligase pathway as part of a larger metabolic context of purine and allantoin metabolism. Secondary mutations in a transcriptional regulator encoded by PP_2046 and a porin encoded by PP_2662 further improved growth on ethylene glycol in evolved strains, likely by balancing fluxes through the initial oxidations of ethylene glycol to glyoxylate. With this knowledge, we reverse engineered an ethylene glycol utilizing strain and thus revealed the metabolic and regulatory basis that are essential for efficient ethylene glycol metabolism in P. putida KT2440.

Currently, 31P NMR is the only analytical method that quantitatively determines the average chain length of long inorganic polyphosphate (>80 P-subunits). In this study, an enzyme assay is presente...

Besides enzymatic conversions, many eukaryotic metabolic pathways also involve transport proteins that shuttle molecules between subcellular compartments, or into the extracellular space. Fungal itaconate production involves two such transport steps, involving an itaconate transport protein (Itp), and a mitochondrial tricarboxylate transporter (Mtt). The filamentous ascomycete Aspergillus terreus and the unicellular basidiomycete Ustilago maydis both produce itaconate, but do so via very different molecular pathways, and under very different cultivation conditions. In contrast, the transport proteins of these two strains are assumed to have a similar function. This study aims to investigate the roles of both the extracellular and mitochondrial transporters from these two organisms by expressing them in the corresponding U. maydis knockouts and monitoring the extracellular product concentrations. Both transporters from A. terreus complemented their corresponding U. maydis knockouts in mediating itaconate production. Surprisingly, complementation with At_MfsA from A. terreus led to a partial switch from itaconate to (S)-2-hydroxyparaconate secretion. Apparently, the export protein from A. terreus has a higher affinity for (S)-2-hydroxyparaconate than for itaconate, even though this species is classically regarded as an itaconate producer. Complementation with At_MttA increased itaconate production by 2.3-fold compared to complementation with Um_Mtt1, indicating that the mitochondrial carrier from A. terreus supports a higher metabolic flux of itaconic acid precursors than its U. maydis counterpart. The biochemical implications of these differences are discussed in the context of the biotechnological application in U. maydis and A. terreus for the production of itaconate and (S)-2-hydroxyparaconate.

An efficient route to obtain aromatic products based on biomass feedstock is a challenge for future biorefineries. Isobutyraldehyde is a promising feedstock available via biotechnological routes based on both carbohydrates and the direct bioconversion of CO2. Herein, we report an efficient process for the aromatisation of isobutyraldehyde over zeolite catalysts in a continuous fixed bed reactor to provide value-added aromatic compounds with a yield of 93%. Benzene, toluene and xylenes are the major compounds formed with 79% yield and a productivity of 65 mmol gcat−1 h−1. Zeolite Y, Beta and Mordenite and ZSM-5 of different modules were studied. Comprehensive catalyst characterisation using XRD, NH3-TPD, N2-physisorption, and ICP-OES enabled establishing structure–performance relationships with a major role of zeolite structure, density of strong acid sites and mesoporosity, respectively. HZSM-5 with Si/Al ratios of 15 to 49 proved effective at the aromatisation possessing a comparable density of strong acid sites of 0.37–0.52 mmol g−1. Superior stability was observed for HZSM-5 zeolites with higher mesopore volumes. The reaction is suggested to mainly proceed via catalytic cracking to C1–C4 alkanes/alkenes, which undergo further oligomerisation, cyclisation, and aromatisation to form the observed alkyl-aromatics. Emphasizing the potential of the concept, long term continuous operation was carried out by alternating 10 hours time on steam operation and catalyst regeneration via in situ calcination.

Volume 86, no. 21, 2020, e01665-20, . Readers should note that when the authors created the deletion mutant of PP\_2675, they deleted the entire region between the gene’s start and stop codons. However, this also deleted the DNA that codes for the first 14

Biotechnology & bioengineering (2021). doi:10.1002/bit.27822, Published by Wiley, New York, NY [u.a.]

Metabolic engineering 66, 167-178 (2021). doi:10.1016/j.ymben.2021.03.011, Published by Academic Press, Orlando, Fla.

Frontiers in genetics 11, 637738 (2021). doi:10.3389/fgene.2020.637738, Published by Frontiers Media, Lausanne

Sufficient supply of oxygen is a major bottleneck in industrial biotechnological synthesis. One example is the heterologous production of rhamnolipids using Pseudomonas putida KT2440. Typically, the synthesis is accompanied by strong foam formation in the reactor vessel hampering the process. It is caused by the extensive bubbling needed to sustain the high respirative oxygen demand in the presence of the produced surfactants. One way to reduce the oxygen requirement is to enable the cells to use the anode of a bioelectrochemical system (BES) as an alternative sink for their metabolically derived electrons. We here used a P. putida KT2440 strain that interacts with the anode using mediated extracellular electron transfer via intrinsically produced phenazines, to perform heterologous rhamnolipid production under oxygen limitation. The strain P. putida RL-PCA successfully produced 30.4 &plusmn, 4.7 mg/L mono-rhamnolipids together with 11.2 &plusmn, 0.8 mg/L of phenazine-1-carboxylic acid (PCA) in 500-mL benchtop BES reactors and 30.5 &plusmn, 0.5 mg/L rhamnolipids accompanied by 25.7 &plusmn, 8.0 mg/L PCA in electrode containing standard 1-L bioreactors. Hence, this study marks a first proof of concept to produce glycolipid surfactants in oxygen-limited BES with an industrially relevant strain.

Ustilago maydis, member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillus terreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.

With its ability to catabolize a wide variety of carbon sources and a growing engineering toolkit, Pseudomonas putida KT2440 is emerging as an important chassis organism for metabolic engineering. Despite advances in our understanding of the organism, many gaps remain in our knowledge of the genetic basis of its metabolic capabilities. The gaps are particularly noticeable in our understanding of both fatty acid and alcohol catabolism, where many paralogs putatively coding for similar enzymes coexist, making biochemical assignment via sequence homology difficult. To rapidly assign function to the enzymes responsible for these metabolisms, we leveraged random barcode transposon sequencing (RB–Tn-Seq). Global fitness analyses of transposon libraries grown on 13 fatty acids and 10 alcohols produced strong phenotypes for hundreds of genes. Fitness data from mutant pools grown on fatty acids of varying chain lengths indicated specific enzyme substrate preferences and enabled us to hypothesize that DUF1302/DUF1329 family proteins potentially function as esterases. From the data, we also postulate catabolic routes for the two biogasoline molecules isoprenol and isopentanol, which are catabolized via leucine metabolism after initial oxidation and activation with coenzyme A (CoA). Because fatty acids and alcohols may serve as both feedstocks and final products of metabolic-engineering efforts, the fitness data presented here will help guide future genomic modifications toward higher titers, rates, and yields. IMPORTANCE To engineer novel metabolic pathways into P. putida, a comprehensive understanding of the genetic basis of its versatile metabolism is essential. Here, we provide functional evidence for the putative roles of hundreds of genes involved in the fatty acid and alcohol metabolism of the bacterium. These data provide a framework facilitating precise genetic changes to prevent product degradation and to channel the flux of specific pathway intermediates as desired.

The temperature dependence of biological rates at different scales (from individual enzymes to isolated organisms to ecosystem processes such as soil respiration and photosynthesis) is the subject of much historical and contemporary research. The precise relationship between the temperature dependence of enzyme rates and those at larger scales is not well understood. We have developed macromolecular rate theory (MMRT) to describe the temperature dependence of biological processes at all scales. Here we formalize the scaling relationship by investigating MMRT both at the molecular scale (constituent enzymes) and for growth of the parent organism. We demonstrate that the inflection point (Tinf) for the temperature dependence of individual metabolic enzymes coincides with the optimal growth temperature for the parent organism, and we rationalize this concordance in terms of the necessity for linearly correlated rates for metabolic enzymes over fluctuating environmental temperatures to maintain homeostasis. Indeed, Tinf is likely to be under strong selection pressure to maintain coordinated rates across environmental temperature ranges. At temperatures at which rates become uncorrelated, we postulate a regulatory catastrophe and organism growth rates precipitously decline at temperatures where this occurs. We show that the curvature in the plots of the natural log of the rate versus temperature for individual enzymes determines the curvature for the metabolic process overall and the curvature for the temperature dependence of the growth of the organism. We have called this "the inflection point hypothesis", and this hypothesis suggests many avenues for future investigation, including avenues for engineering the thermal tolerance of organisms.

Frontiers in Bioengineering and Biotechnology 8, 976 (2020). doi:10.3389/fbioe.2020.00976, Published by Frontiers Media, Lausanne

Frontiers in molecular biosciences 7, 211 (2020). doi:10.3389/fmolb.2020.00211, Published by Frontiers, Lausanne

Rhamnolipids represent a large class of biologically produced surface-active compounds, which participate in various essential cellular functions. While many studies have reported on the antibacterial and antifungal effects of rhamnolipids, only a few tried to describe the molecular mechanisms underlying these effects. Here, we first review the literature on rhamnolipid-phospholipid interactions and then add own results on a prominent monorhamnolipid congener, RhaC10C10. By focusing on the interactions between the rhamnolipid and lipid model membranes of different complexity, up to heterogeneous raft-like model biomembranes, we gained new insights into changes of the lateral membrane organization and morphological changes of membrane vesicles induced by partitioning of the rhamnolipid. To this end, AFM, confocal fluorescence microscopy, and Laurdan fluorescence spectroscopy analyses were employed. In summary, we provide a concise description of the physio-chemical effects rhamnolipids impose on lipid membranes, which help us to understand their physiological role.

Methyl ketones present a group of highly reduced platform chemicals industrially produced from petroleum-derived hydrocarbons. They find applications in the fragrance, flavor, pharmacological, and agrochemical industries, and are further discussed as biodiesel blends. In recent years, intense research has been carried out to achieve sustainable production of these molecules by re-arranging the fatty acid metabolism of various microbes. One challenge in the development of a highly productive microbe is the high demand for reducing power. Here, we engineeredPseudomonas taiwanensisVLB120 for methyl ketone production as this microbe has been shown to sustain exceptionally high NAD(P)H regeneration rates. The implementation of published strategies resulted in 2.1 g Laq-1methyl ketones in fed-batch fermentation. We further increased the production by eliminating competing reactions suggested by metabolic analyses. These efforts resulted in the production of 9.8 g Laq-1methyl ketones (corresponding to 69.3 g Lorg-1in thein situextraction phase) at 53 % of the maximum theoretical yield. This represents a 4-fold improvement in product titer compared to the initial production strain and the highest titer of recombinantly produced methyl ketones reported to date. Accordingly, this study underlines the high potential ofP. taiwanensisVLB120 to produce methyl ketones and emphasizes model-driven metabolic engineering to rationalize and accelerate strain optimization efforts.

Electroautotrophy is a novel and fascinating microbial metabolism, with tremendous potential for CO2 storage and valorization into chemicals and materials made thereof. Research attention has been devoted toward the characterization of acetogenic and methanogenic electroautotrophs. In contrast, here we characterize the electrophysiology of a sulfate-reducing bacterium, Desulfosporosinus orientis, harboring the Wood-Ljungdahl pathway and, thus, capable of fixing CO2 into acetyl-CoA. For most electroautotrophs the mode of electron uptake is still not fully clarified. Our electrochemical experiments at different polarization conditions and Fe0 corrosion tests point to a H2- mediated electron uptake ability of this strain. This observation is in line with the lack of outer membrane and periplasmic multi-heme c-type cytochromes in this bacterium. Maximum planktonic biomass production and a maximum sulfate reduction rate of 2 ± 0.4 mM day-1 were obtained with an applied cathode potential of -900 mV vs. Ag/AgCl, resulting in an electron recovery in sulfate reduction of 37 ± 1.4%. Anaerobic sulfate respiration is more thermodynamically favorable than acetogenesis. Nevertheless, D. orientis strains adapted to sulfate-limiting conditions, could be tuned to electrosynthetic production of up to 8 mM of acetate, which compares well with other electroacetogens. The yield per biomass was very similar to H2/CO2 based acetogenesis. Acetate bioelectrosynthesis was confirmed through stable isotope labeling experiments with Na-H13CO3. Our results highlight a great influence of the CO2 feeding strategy and start-up H2 level in the catholyte on planktonic biomass growth and acetate production. In serum bottles experiments, D. orientis also generated butyrate, which makes D. orientis even more attractive for bioelectrosynthesis application. A further optimization of these physiological pathways is needed to obtain electrosynthetic butyrate production in D. orientis biocathodes. This study expands the diversity of facultative autotrophs able to perform H2-mediated extracellular electron uptake in Bioelectrochemical Systems (BES). We characterized a sulfate-reducing and acetogenic bacterium, D. orientis, able to naturally produce acetate and butyrate from CO2 and H2. For any future bioprocess, the exploitation of planktonic growing electroautotrophs with H2-mediated electron uptake would allow for a better use of the entire liquid volume of the cathodic reactor and, thus, higher productivities and product yields from CO2-rich waste gas streams.

Proteins have generally been recognized to constitute the key cellular component in shaping microbial phenotypes. Due to limited cellular resources and space, optimal allocation of proteins is crucial for microbes to facilitate maximum proliferation rates while allowing a flexible response to environmental changes. Regulatory patterns of protein allocation were utilized to account for the condition-dependent proteome in a genome-scale metabolic reconstruction of Escherichia coli by linearly linking mass concentrations of protein sectors and single metabolic enzymes to flux variables. The resulting protein allocation model (PAM) correctly approximates wildtype phenotypes and flux distributions for various substrates, even under data scarcity. Moreover, we showed the ability of the PAM to predict metabolic responses of single gene deletion mutants by additionally assuming growth-limiting, transcriptional restrictions. Thus, we promote the integration of protein allocation constraints into classical constraint-based models to foster their predictive capabilities and application for strain analysis and metabolic engineering purposes.

Frontiers in Bioengineering and Biotechnology 7, 480 (2020). doi:10.3389/fbioe.2019.00480, Published by Frontiers Media, Lausanne

The production of biosurfactants is often hampered by excessive foaming in the bioreactor, impacting system scale-up and downstream processing. Foam fractionation was proposed to tackle this challenge by combining in situ product removal with a pre-purification step. In previous studies, foam fractionation was coupled to bioreactor operation, hence it was operated at suboptimal parameters. Here, we use an external fractionation column to decouple biosurfactant production from foam fractionation, enabling continuous surfactant separation, which is especially suited for system scale-up. As a subsequent product recovery step, continuous foam adsorption was integrated into the process. The configuration is evaluated for rhamnolipid (RL) or 3-(3-hydroxyalkanoyloxy)alkanoic acid (HAA, i.e., RL precursor) production by recombinant non-pathogenic Pseudomonas putida KT2440. Surfactant concentrations of 7.5 gRL/L and 2.0 gHAA/L were obtained in the fractionated foam. 4.7 g RLs and 2.8 g HAAs could be separated in the 2-stage recovery process within 36 h from a 2 L culture volume. With a culture volume scale-up to 9 L, 16 g RLs were adsorbed, and the space-time yield (STY) increased by 31% to 0.21&nbsp, gRL/L∙h. We demonstrate a well-performing process design for biosurfactant production and recovery as a contribution to a vital bioeconomy.

Green chemistry : GC 22(23), 8495-8510 (2020). doi:10.1039/d0gc02885a, Published by RSC, Cambridge

Microbial bioproduction of the aromatic acid anthranilate (ortho-aminobenzoate) has the potential to replace its current, environmentally demanding production process. The host organism employed for such a process needs to fulfil certain demands to achieve industrially relevant product levels. As anthranilate is toxic for microorganisms, the use of particularly robust production hosts can overcome issues from product inhibition. The microorganisms Corynebacterium glutamicum and Pseudomonas putida are known for high tolerance towards a variety of chemicals and could serve as promising platform strains. In this study, the resistance of both wild-type strains towards anthranilate was assessed. To further enhance their native tolerance, adaptive laboratory evolution (ALE) was applied. Sequential batch fermentation processes were developed, adapted to the cultivation demands for C. glutamicum and P. putida, to enable long-term cultivation in the presence of anthranilate. Isolation and analysis of single mutants revealed phenotypes with improved growth behaviour in the presence of anthranilate for both strains. The characterization and improvement of both potential hosts provide an important basis for further process optimization and will aid the establishment of an industrially competitive method for microbial synthesis of anthranilate.

Analytical and bioanalytical chemistry 412(23), 5601-5613 (2020). doi:10.1007/s00216-020-02776-5 special issue: "NIR excitation/emission fluorescent probe for imaging of cysteine/SCF-MS for analyzing chemicals of emerging concern/CE/MC-ICP-MS for on-line species-specific isotopic analysis of sulfur/Novel alkaline phosphatase activity sensing strategy", Published by Springer, Berlin

Obligate aerobic organisms rely on a functional electron transport chain for energy conservation and NADH oxidation. Because of this essential requirement, the genes of this pathway are likely constitutively and highly expressed to avoid a cofactor imbalance and energy shortage under fluctuating environmental conditions. We here investigated the essentiality of the three NADH dehydrogenases of the respiratory chain of the obligate aerobe Pseudomonas taiwanensis VLB120 and the impact of the knockouts of corresponding genes on its physiology and metabolism. While a mutant lacking all three NADH dehydrogenases seemed to be nonviable, the generated single or double knockout strains displayed no, or only a weak, phenotype. Only the mutant deficient in both type-2 dehydrogenases showed a clear phenotype with biphasic growth behavior and a strongly reduced growth rate in the second phase. In-depth analyses of the metabolism of the generated mutants including quantitative physiological experiments, transcript analysis, proteomics, and enzyme activity assays revealed distinct responses to type-2 and type-1 dehydrogenase deletions. An overall high metabolic flexibility enables P. taiwanensis to cope with the introduced genetic perturbations and maintain stable phenotypes, likely by re-routing of metabolic fluxes. This metabolic adaptability has implications for biotechnological applications. While the phenotypic robustness is favorable in large-scale applications with inhomogeneous conditions, the possible versatile redirecting of carbon fluxes upon genetic interventions can thwart metabolic engineering efforts.Importance While Pseudomonas has the capability for high metabolic activity and the provision of reduced redox cofactors important for biocatalytic applications, exploitation of this characteristic might be hindered by high, constitutive activity of and, consequently, competition with the NADH dehydrogenases of the respiratory chain. The in-depth analysis of NADH dehydrogenase mutants of Pseudomonas taiwanensis VLB120 presented here, provides insight into the phenotypic and metabolic response of this strain to these redox metabolism perturbations. The observed great metabolic flexibility needs to be taken into account for rational engineering of this promising biotechnological workhorse towards a host with controlled and efficient supply of redox cofactors for product synthesis.

Biotechnology journal : BTJ (2020). doi:10.1002/biot.202000211, Published by Wiley-VCH, Weinheim

Frontiers in Bioengineering and Biotechnology 8, 572892 (2020). doi:10.3389/fbioe.2020.572892, Published by Frontiers Media, Lausanne

Frontiers in Bioengineering and Biotechnology 7, 476 (2020). doi:10.3389/fbioe.2019.00476, Published by Frontiers Media, Lausanne

Methyl ketones present a group of highly reduced platform chemicals industrially produced from petroleum-derived hydrocarbons. They find applications in the fragrance, flavor, pharmacological, and agrochemical industries, and are further discussed as biodiesel blends. In recent years, intense research has been carried out to achieve sustainable production of these molecules by re-arranging the fatty acid metabolism of various microbes. One challenge in the development of a highly productive microbe is the high demand for reducing power. Here, we engineered Pseudomonas taiwanensis VLB120 for methyl ketone production as this microbe has been shown to sustain exceptionally high NAD(P)H regeneration rates. The implementation of published strategies resulted in 2.1 g Laq−1 methyl ketones in fed-batch fermentation. We further increased the production by eliminating competing reactions suggested by metabolic analyses. These efforts resulted in the production of 9.8 g Laq−1 methyl ketones (corresponding to 69.3 g Lorg−1 in the in situ extraction phase) at 53% of the maximum theoretical yield. This represents a 4-fold improvement in product titer compared to the initial production strain and the highest titer of recombinantly produced methyl ketones reported to date. Accordingly, this study underlines the high potential of P. taiwanensis VLB120 to produce methyl ketones and emphasizes model-driven metabolic engineering to rationalize and accelerate strain optimization efforts.

Frontiers in Bioengineering and Biotechnology 8, 38 (2020). doi:10.3389/fbioe.2020.00038, Published by Frontiers Media, Lausanne

With its ability to catabolize a wide variety of carbon sources and a growing engineering toolkit, Pseudomonas putida KT2440 is emerging as an important chassis organism for metabolic engineering. Despite advances in our understanding of this organism, many gaps remain in our knowledge of the genetic basis of its metabolic capabilities. These gaps are particularly noticeable in our understanding of both fatty acid and alcohol catabolism, where many paralogs putatively coding for similar enzymes co-exist making biochemical assignment via sequence homology difficult. To rapidly assign function to the enzymes responsible for these metabolisms, we leveraged Random Barcode Transposon Sequencing (RB-TnSeq). Global fitness analyses of transposon libraries grown on 13 fatty acids and 10 alcohols produced strong phenotypes for hundreds of genes. Fitness data from mutant pools grown on varying chain length fatty acids indicated specific enzyme substrate preferences, and enabled us to hypothesize that DUF1302/DUF1329 family proteins potentially function as esterases. From the data we also postulate catabolic routes for the two biogasoline molecules isoprenol and isopentanol, which are catabolized via leucine metabolism after initial oxidation and activation with CoA. Because fatty acids and alcohols may serve as both feedstocks or final products of metabolic engineering efforts, the fitness data presented here will help guide future genomic modifications towards higher titers, rates, and yields.IMPORTANCETo engineer novel metabolic pathways into P. putida, a comprehensive understanding of the genetic basis of its versatile metabolism is essential. Here we provide functional evidence for the putative roles of hundreds of genes involved in the fatty acid and alcohol metabolism of this bacterium. These data provide a framework facilitating precise genetic changes to prevent product degradation and channel the flux of specific pathway intermediates as desired.

Here we report a chemoenzymatic approach to synthesize 1-octene from carbohydrates via ethenolysis of rhamnolipids. Rhamnolipids synthesized by P. putida contain a double bond between carbon five and six, which is experimentally confirmed via olefin cross metathesis. Utilizing these lipids in the ethenolysis catalyzed by a Grubbs&minus, Hoveyda-type catalyst selectively generates 1-octene and with good conversions. This study shows the potential of chemoenzymatic approaches to produce compounds for the chemical industry from renewable resources.

The world's oceans are polluted by a continuous inflow of plastic. Plastic fragments finally into microplastic, which can be taken up, for example by plankton, and subsequently by the entire ocean food web. An approach to reduce plastic pollution constitutes the accelerated microplastic degradation in marine environments. TiO2 (anatase) is commonly used as an oxidative photocatalyst and well known to catalyze the degradation of organic compounds upon UV irradiation. In this study, a selective activation of TiO2 (anatase) particles encapsulated by Ca- or Sr-polyphosphate is presented. The TiO2 polyphosphate core-shell particles are envisaged as additives in plastic products. The highly concentrated cations from seawater, viz. Na+ and Mg2+, displace the Ca2+ or Sr2+ cations from the polyphosphate shell. As a result, the polyphosphate coating dissolves and thus the photocatalytically active TiO2 core is released. The stability of the TiO2 polyphosphate particles in potable water and the seawater activated disintegration of methylene blue, methyl methacrylate, terephtalic acid, and poly(vinyl alcohol) was shown. It has been demonstrated, that the sweetwater stable polyphosphate coating degrades in the presence of seawater, which could be monitored by the activation of the TiO2 (anatase) photocatalyst.

Biotechnology and Bioengineering 27337 (2020). doi:10.1002/bit.27337, Published by Wiley, New York, NY

Inorganic polyphosphate (polyP) is the polymer of orthophosphate and can be found in all living organisms. For polyP characterization, one or more of six parameters are of interest: the molecular structure (linear, cyclic, or branched), the concentration, the average chain length, the chain length distribution, the cellular localization, and the cation composition. Here, the merits, limitations, and critical parameters of the state-of-the-art methods for the analysis of the six parameters from the life sciences are discussed. With this contribution, we aim to lower the entry barrier into the analytics of polyP, a molecule with prominent, yet often incompletely understood, contributions to cellular function.

High-throughput screening of cell-secreted proteins is essential for various biotechnological applications. In this article, we show a microfluidic approach to perform the analysis of cell-secreted proteins in nanoliter droplet arrays by two complementary methods, fluorescence microscopy and mass spectrometry. We analyzed the secretion of the enzyme phytase, a phosphatase used as an animal feed additive, from a low number of yeast cells. Yeast cells were encapsulated in nanoliter volumes by droplet microfluidics and deposited on spatially defined spots on the surface of a glass slide mounted on the motorized stage of an inverted fluorescence microscope. During the following incubation for several hours to produce phytase, the droplets can be monitored by optical microscopy. After addition of a fluorogenic substrate at a defined time, the relative concentration of phytase was determined in every droplet. Moreover, we demonstrate the use of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to monitor the multistep conversion of the native substrate phytic acid by phytase secreted in 7 nL droplets containing 50-100 cells. Our method can be adapted to various other protocols. As the droplets are easily accessible, compounds such as assay reagents or matrix molecules can be added to all or to selected droplets only, or part of the droplet volume could be removed. Hence, this platform is a versatile tool for questions related to cell secretome analysis.

The structures of three previously unknown siderophores produced by the fluorescent, biotechnologically relevant Pseudomonas taiwanensis (P. taiwanensis) VLB120 bacteria were elucidated by means of hydrophilic interaction liquid chromatography (HILIC) hyphenated to high-resolution tandem mass spectrometry (HRMS/MS). They could be verified as iron(III)- and aluminum(III) complexes as well as the protonated molecules of the siderophores formed by in-source fragmentation. The siderophores were separated according to their different acyl side chains and additionally according their central ions. One of the siderophores was identified as pyoverdine with a malic acid (hydroxy succinic acid) amide side chain and a peptide moiety consisting of Orn-Asp-OHAsn-Thr-AcOHOrn-Ser-cOHOrn. The other analytes were assigned to an azotobactin with the identical peptide chain linked to the characteristic chromophoric unit and a pyoverdine with a variation in the amino acid sequence. Proline is directly linked to the pyoverdine chromophore instead of ornithine. Acidic and enzymatic hydrolyses were carried out to analyze the individual amino acids. Beside OHAsn, each amino acid of the peptide part was identified by HILIC-HRMS and comparison to authentic standards. Additionally, 15N-labeled cellular supernatants were analyzed by means of HRMS/MS. The results of the MS/MS experiments complemented by accurate mass data facilitated elucidation of the structures studied in this work and provided further confirmation of the three recently described pyoverdines of P. taiwanensis VLB120 (Baune et al. in Biometals 30:589-597, 2017. https://doi.org/10.1007/s10534-017-0029-7 ).

Aromatic chemicals are important building blocks for the production of a multitude of everyday commodities. Currently, aromatics production relies almost exclusively on petrochemical processes. To achieve sustainability, alternative synthesis methods need to be developed. Here, we strived for an efficient production of phenol, a model aromatic compound of industrial relevance, from renewable carbon sources using the solvent-tolerant biocatalyst Pseudomonas taiwanensis VLB120. First, multiple catabolic routes for the degradation of aromatics and related compounds were inactivated, thereby obtaining the chassis strain P. taiwanensis VLB120Δ5 incapable of growing on 4-hydroxybenzoate (ΔpobA), tyrosine (Δhpd), and quinate (ΔquiC, ΔquiC1, ΔquiC2). In this context, a novel gene contributing to the quinate catabolism was identified (quiC2). Second, we employed a combination of reverse- and forward engineering to increase metabolic flux towards the product, using leads obtained from the analysis of aromatics producing Pseudomonas putida strains previously generated by mutagenesis. Phenol production was enabled by the heterologous expression of a codon-optimized and chromosomally integrated tyrosine phenol-lyase encoding gene from Pantoea agglomerans AJ2985 (PaTPL2). The genomic modification of endogenous genes encoding TrpEP290S, AroF-1P148L, and PheAT310I, and the deletion of pykA improved phenol production 17-fold, while also minimizing the burden caused by plasmids and auxotrophies. The additional overexpression of known bottleneck enzymes (AroGfbr, TyrAfbr) derived from Escherichia coli further enhanced phenol titers. The best producing strain P. taiwanensis VLB120Δ5-TPL36 reached yields of 15.8% and 18.5% (Cmol/Cmol) phenol from glucose and glycerol, respectively, in a mineral medium without addition of complex nutrients. This is the highest yield ever reported for microbially produced phenol.

Brewers' spent grain (BSG) is produced worldwide in millions of tons during the beer brewing process. Due to its high content of structural carbohydrates, BSG is a promising material for being valorised in biorefineries. In this study three process routes for producing itaconate from BSG hydrolysates are presented using the previously engineered smut fungi UstilagomaydisMB215Δcyp3ΔPria1::Petef as whole-cell biocatalyst. Using a fermentation medium based on BSG hydrolysate a yield of 0.38gIta/gSugar and a productivity of 0.11gIta/(L·h) were achieved. The addition of detoxified hydrothermal supernatant to the fermentation medium did not result in improved performance parameters but resulted in a decreased yield (0.29gIta/gSugar) and productivity (0.053 gIta/(L·h)). Simultaneous saccharification and fermentation with hydrothermal pretreated BSG is possible, although at lower rate. In summary, the valorisation of BSG in fungal fermentations might complement the end-of-life options of this industrial side product.

While yeast is one of the most studied organisms, its intricate biology remains to be fully mapped and understood. This is especially the case when it comes to capture rapid, in vivo fluctuations of metabolite levels. Secondary electrospray ionization-high resolution mass spectrometry SESI-HRMS is introduced here as a sensitive and noninvasive analytical technique for online monitoring of microbial metabolic activity. The power of this technique is exemplarily shown for baker’s yeast fermentation, for which the time-resolved abundance of about 300 metabolites is demonstrated. The results suggest that a large number of metabolites produced by yeast from glucose neither are reported in the literature nor are their biochemical origins deciphered. With the technique demonstrated here, researchers interested in distant disciplines such as yeast physiology and food quality will gain new insights into the biochemical capability of this simple eukaryote., Scientific Reports, 7 (1), ISSN:2045-2322