Search

Self-assembled peptides gain increasing interest as biocompatible and biodegradable scaffolds for tissue engineering. Rationally designed self-assembling building blocks that carry cell adhesion motifs such as Arg-Gly-Asp (RGD) are especially attractive. We have used a combination of theoretical and experimental approaches toward such rational designs, especially focusing on modular designs that consist of a central ultrashort amphiphilic motif derived from the adenovirus fiber shaft. In this study, we rationally designed RGDSGAITIGC, a bifunctional self-assembling amyloid peptide which encompasses cell adhesion and potential cysteine-mediated functionalization properties through the incorporation of an RGD sequence motif and a cysteine residue at the N- and C- terminal end, respectively. We performed replica exchange MD simulations that suggested that the key factor determining cell adhesion is the total solvent accessibility of the RGD motif and also that the C-terminal cysteine is adequately exposed. The designer peptides self-assembled into fibers that are structurally characterized with Transmission Electron Microscopy, Scanning Electron Microscopy and X-ray fiber diffraction. Furthermore, they supported cell adhesion and proliferation of a model cell line. We consider that the current bifunctional properties of the RGDSGAITIGC fibril-forming peptide can be exploited to fabricate novel biomaterials with promising biomedical applications. Such short self-assembling peptides that are amenable to computational design offer open-ended possibilities toward multifunctional tissue engineering scaffolds of the future.

Multiphoton lithography allows the high resolution, free-form 3D printing of structures such as micro-optical elements and 3D scaffolds for Tissue Engineering. A major obstacle in its application in these fields is material and structure autofluorescence. Existing photoresists promise near zero fluorescence at the expense of poor mechanical properties, and low printing efficiency. Sudan Black B is a molecular quencher used as a dye for biological studies and as means of decreasing the autofluorescence of polymers. In our study, we report the use of Sudan Black B both as a photoinitiator and as a post-fabrication treatment step, using the zirconium silicate SZ2080 for the development of a non-fluorescent composite. We use this material for the 3D printing of micro-optical elements, and meso-scale scaffolds for mesenchymal stem cell cultures. Our results show that the Sudan Black B photosensitive hybrid can be used for the fabrication of high resolution, highly transparent, autofluorescence-free microstructures.

Multiphoton lithography allows the high resolution, free-form 3D printing of structures such as micro-optical elements and 3D scaffolds for Tissue Engineering. A major obstacle in its application in these fields is material and structure autofluorescence. Existing photoresists promise near zero fluorescent in expense of poor mechanical properties, and low printing efficiency. Sudan Black B is a molecular quencher used as a dye for biological studies and as means of decreasing the autofluorescence of polymers. In our study we report the use of Sudan Black B as both a photoinitiator and as a post-fabrication treatment step, using the zirconium silicate SZ2080™ for the development of a non-fluorescent composite. We use this material for the 3D printing of micro-optical elements, and meso-scale scaffolds for Mesenchymal Stem Cell cultures. Our results show the hybrid, made photosensitive with Sudan Black B, can be used for the fabrication of high resolution, highly transparent, autofluorescence-free microstructures.

Although the peripheral nervous system exhibits a higher rate of regeneration than that of the central nervous system through a spontaneous regeneration after injury, the functional recovery is fairly infrequent and misdirected. Thus, the development of successful methods to guide neuronal outgrowth, in vitro, is of great importance. In this study, a precise flow controlled microfluidic system with specific custom-designed chambers, incorporating laser-microstructured polyethylene terephthalate (PET) substrates comprising microgrooves, was fabricated to assess the combined effect of shear stress and topography on Schwann cells’ behavior. The microgrooves were positioned either parallel or perpendicular to the direction of the flow inside the chambers. Additionally, the cell culture results were combined with computational flow simulations to calculate accurately the shear stress values. Our results demonstrated that wall shear stress gradients may be acting either synergistic or antagonistic depending on the substrates groove orientation relative to the flow direction. The ability to control cell alignment in vitro could potentially be used in the fields of neural tissue engineering and regenerative medicine.

Cells take decisions on their responses depending on the stimuli received by the surrounding extracellular environment, that provides the essential cues at the micro and the nano-lengthscales required for adhesion, orientation, proliferation and differentiation. In this study, discontinuous microcones on silicon (Si) and continuous microgrooves on polyethylene terephthalate (PET) substrates were fabricated via ultrashort-pulsed laser irradiation at various fluences, resulting in microstructures with different roughness and geometrical characteristics. The topographical models attained were specifically developed to imitate the guidance and alignment of Schwann cells for oriented axonal regrowth, towards nerve regeneration. At the same time, positive replicas of the silicon microstructures formed were successfully reproduced, via soft lithography, on the biodegradable polymer poly(lactide-co-glycolide) (PLGA). The anisotropic continuous (PET) and discontinuous (PLGA replicas) microstructured polymeric substrates were assessed in terms of their influence on the Schwann cells responses. It is shown that the developed micropatterned substrates enable control over the cellular adhesion, proliferation and orientation and are thus useful to engineer cell alignment in vitro. This property could be potentially useful in the fields of neural tissue engineering and for dynamic microenvironment systems that simulate in vivo conditions.

Advances in surfactant-assisted chemical approaches have led the way for the exploitation of nanoscale inorganic particles in medical diagnosis and treatment. In this field, magnetically-driven multimodal nanotools that perform both detection and therapy, well-designed in size, shape and composition, are highly advantageous. Such a theranostic material—which entails the controlled assembly of smaller (maghemite) nanocrystals in a secondary motif that is highly dispersible in aqueous media—is discussed here. These surface functionalized, pomegranate-like ferrimagnetic nanoclusters (40–85 nm) are made of nanocrystal subunits that show a remarkable magnetic resonance imaging contrast efficiency, which is better than that of the superparamagnetic contrast agent Endorem©. Going beyond this attribute and with their demonstrated low cytotoxicity in hand, we examine the critical interaction of such nanoprobes with cells at different physiological environments. The time-dependent in vivo scintigraphic imaging of mice experimental models, combined with a biodistribution study, revealed the accumulation of nanoclusters in the spleen and liver. Moreover, the in vitro proliferation of spleen cells and cytokine production witnessed a size-selective regulation of immune system cells, inferring that smaller clusters induce mainly inflammatory activities, while larger ones induce anti-inflammatory actions. The preliminary findings corroborate that the modular chemistry of magnetic iron oxide nanoclusters stimulates unexplored pathways that could be driven to alter their function in favor of healthcare.

The aim of this study is to investigate fibroblast cell adhesion and viability on highly rough three-dimensional (3D) silicon (Si) surfaces with gradient roughness ratios and wettabilities. Culture surfaces were produced by femtosecond (fs) laser structuring of Si wafers and comprised forests of conical spikes exhibiting controlled dual-scale roughness at both the micro- and the nano-scale. Variable roughness could be achieved by changing the laser pulse fluence and control over wettability and therefore surface energy could be obtained by covering the structures with various conformal coatings, which altered the surface chemistry without, however, affecting morphology. The results showed that optimal cell adhesion was obtained for small roughness ratios, independently of the surface wettability and chemistry, indicating a non-monotonic dependence of fibroblast adhesion on surface energy. Additionally, it was shown that, for the same degree of roughness, a proper change in surface energy could switch the behaviour from cell-phobic to cell-philic and vice versa, transition that was always correlated to surface wettability. These experimental findings are discussed on the basis of previous theoretical models describing the relation of cell response to surface energy. The potential use of the patterned Si substrates as model scaffolds for the systematic exploration of the role of 3D micro/nano morphology and/or surface energy on cell adhesion and growth is envisaged.

Two-photon polymerization has been employed to fabricate three-dimensional structures using the biodegradable triblock copolymer poly(epsilon-caprolactone-co-trimethylenecarbonate)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone-co-trimethylenecarbonate) with 4,4'-bis(diethylamino)benzophenone as the photoinitiator. The fabricated structures were of good quality and had four micron resolution. Initial cytotoxicity tests show that the material does not affect cell proliferation. These studies demonstrate the potential of two-photon polymerization as a technology for the fabrication of biodegradable scaffolds for tissue engineering.

Peptide-based arrays and patterns are a powerful tool in the study of protein functionality, with a variety of applications such as the study of interactions between peptides and enzymes, proteins and DNA. One of the main and most critical issues is the generation of high density arrays which maintain the biological function of the peptides. In this study, we employ Laser-Induced Forward Transfer for the generation of high density photosensitive biotin arrays on ORMOCER®-coated surfaces. We then generate peptide microarrays, which assemble due to the employment of avidin-biotin and thiol chemistry. These initial results are poised to the construction of larger peptide patterns as scaffolds for the incorporation and display of ligands critical for cell attachment and growth, or for the templating of inorganic materials. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

The direct-writing technique laser-induced forward transfer has been employed for the micro-array printing of liquid solutions of the enzyme horseradish peroxidase and the protein Titin on nitrocellulose solid surfaces. The effect of two UV laser pulse lengths, femtosecond and nanosecond has been studied in relation with maintaining the activity of the transferred biomolecules. The quantification of the active biomolecules after transfer has been carried out using Bradford assay, quantitative colorimetric enzymatic assay and fluorescence techniques. Spectrophotometric measurements of the HRP and the Titin activity as well as chromatogenic and fluorescence assay studies have revealed a connection between the properties of the deposited, biologically active biomolecules, the experimental conditions and the target composition. The bioassays have shown that up to 78% of the biomolecules remained active after femtosecond laser transfer, while this value reduced to 54% after nanosecond laser transfer. The addition of glycerol in a percentage up to 70% in the solution to be transferred has contributed to the stabilization of the micro-array patterns and the increase of their resolution.

Laser-induced forward transfer has been used for the deposition of photoactive biotin in micron-scale patterns. The process uses a 500 fs pulsed KrF laser beam to transfer small amounts of a liquid solution target as micron-size droplets to a substrate placed parallel and in close proximity to it. The biomolecules remain active after the transfer; this is demonstrated through fluorescence assays. In addition to the laser parameters, those regarding the target composition and the receiving surface for the miniaturization of the transferred patterns have been studied and optimized. Droplets as small as 5 μm have been obtained by reducing the target thickness and transfer energy; by increasing the percentage of glycerol added in the biomolecules solution and by using hydrophobic surfaces as receiving substrates. The influence of the glycerol addition and the hydrophobicity of the receiving surfaces on the activity of the transferred biomolecules have also been studied.

To overcome the limiting antigenic repertoire of protein sub-units and the side effects of adjuvants applied in second generation vaccines, the present work combined in vitro and in vivo manipulations to develop biomaterials allowing natural antigen-loading and presentation in vitro and further activation of the immune response in vivo. 3-dimensional laser micro-textured implantable Si-scaffolds supported mouse macrophage adherence, allowed natural seeding with human serum albumin (antigen) and specific antibody and inflammatory cytokine production in vitro. Implantation of Si-scaffolds loaded with antigen-activated macrophages induced an inflammatory reaction along with antigen-specific antibody production in vivo, which could be detected even 30 days post implantation. Analysis of implant histology using scanning electron microscopy showed that Si-scaffolds could be stable for a 6-month period. Such technology leads to personalized implantable vaccines, opening novel areas of research and treatment.

Research on magnetic nanocrystals attracts wide-spread interest because of their challenging fundamental properties, but it is also driven by problems of practical importance to the society, ranging from electronics (e.g. magnetic recording) to biomedicine. In that respect, iron oxides are model functional materials as they adopt a variety of oxidation states and coordinations that facilitate their use. We show that a promising way to engineer further their technological potential in diagnosis and therapy is the assembly of primary nanocrystals into larger colloidal entities, possibly with increased structural complexity. In this context, elevated-temperature nanochemistry (c.f. based on a polyol approach) permitted us to develop size-tunable, low-cytotoxicity iron-oxide nanoclusters, entailing iso-oriented nanocrystals, with enhanced magnetization. Experimental (magnetometry, electron microscopy, Mossbauer and NMR spectroscopies) results supported by Monte Carlo simulations are reviewed to show that such assemblies of surface-functionalized iron oxide nanocrystals have a strong potential for innovation. The clusters’ optimized magnetic anisotropy (including microscopic surface spin disorder) and weak ferrimagnetism at room temperature, while they do not undermine colloidal stability, endow them a profound advantage as efficient MRI contrast agents and hyperthermic mediators with important biomedical potential.

In this report, we examined the involvement of the cytokines tumor necrosis factor (TNF)-alpha, interferon (IFN)-gamma, interleukin (IL)-4, and IL-10 as well as nitric oxide (NO) in the lipopolysaccharide (LPS)-induced experimental abortion model in BALB/c mice. Although in vivo administration of LPS in pregnant mice showed a 72% decrease of serum IL-10, no significant difference in serum TNF-alpha, IFN-gamma, and IL-4 levels, compared to controls, could be detected. At the same time, a correlation of fetal abortion and maternal splenomegaly with an important increase of NO synthesis in the serum was obtained. Simultaneous administration of LPS and aminoguanidine (AG; an inhibitor to NO synthase) rescued the LPS-induced fetal abortion, reduced maternal spleen weight to physiological levels, and decreased serum NO concentration to control levels. In vitro experiments showed that LPS directly induced NO production in primary placental cells and the TPOPHO-1 trophoblast cell line by stimulating the inducible isoform of NO synthase, which ultimately could be blocked by the NO synthase inhibitors AG and L-NAME. The results indicate that LPS, despite its beneficial involvement in intracellular infections, participates in inflammatory/autoimmune damage during pregnancy, leading to embryotoxicity, which is closely linked to the NO pathway.

Micro-and nanofabrication techniques provide the opportunity to develop new types of cell culture platform, where the effect of various topographical cues on cellular functions such as proliferation and differentiation can be studied. In this study, PC12 cells were cultured on patterned silicon (Si) surfaces comprising arrays of microcones (MCs) exhibiting different geometrical characteristics and surface chemistries. It was illustrated that, in the absence of nerve growth factor (NGF), PC12 cells increased proliferation on all types of patterned surface, as compared to flat Si surfaces. However, in the presence of NGF, PC12 cells showed different responses, depending on the plating surface. Unlike low and intermediate rough MC surfaces, highly rough ones exhibiting large distances between MCs did not support PC12 cell differentiation, independently of the MCs' chemical coatings. These results suggest that the geometrical characteristics of MCs alone can influence specific cellular functions. Tailoring of the physical properties of arrays of Si MCs in order to identify which combinations of MC topologies and spatially defined chemistries are capable of driving specific cellular responses is envisaged.

Molecular self-assembly is emerging as a viable "bottom-up" approach for fabricating nanostructures. Self-assembled biomolecular structures are particularly attractive, due to their versatile chemistry, molecular recognition properties, and biocompatibility. Among them, amyloid protein and peptide fibrils are self-assembled nanostructures with unique physical and chemical stability, formed from quite simple building blocks; their ability to work as a template for the fabrication of low resistance, conducting nanowires has already been demonstrated. The precise positioning of peptide-based nanostructures is an essential part of their use in technological applications, and their controlled assembly, positioning, and integration into microsystems is a problem of considerable current interest. To date, their positioning has been limited to their placement on flat surfaces or to the fabrication of peptide arrays. Here, we propose a new method for the precise, three-dimensional patterning of amyloid fibrils. The technique, which combines femtosecond laser technology and biotin-avidin mediated assembly on a polymeric matrix, can be applied in a wide variety of fields, from molecular electronics to tissue engineering.

The aim of this study is to investigate cell adhesion and viability on highly rough polymeric surfaces with gradient roughness ratios and wettabilities prepared by microreplication of laser micro/nano-textured Si surfaces. Negative replicas on polydimethylsiloxane as well as positive ones on a photocurable (organically modified ceramic) and a biodegradable (poly(lactide-co-glycolide)) polymer have been successfully reproduced. The final culture substrates comprised from forests of micron-sized conical spikes exhibiting a range of roughness ratios and wettabilities, was achieved by changing the laser fluence used to fabricate the original template surfaces. Cell culture experiments were performed with the fibroblast NIH/3T3 and PC12 neuronal cell lines in order to investigate how these surfaces are capable of modulating different types of cellular responses including, viability, adhesion and morphology. The results showed a preferential adhesion of both cell types on the microstructured surfaces compared to the unstructured ones. In particular, the fibroblast NIH/3T3 cells show optimal adhesion for small roughness ratios, independent of the surface wettability and polymer type, indicating a non-monotonic dependence of cell adhesion on surface energy. In contrast, the PC12 cells were observed to adhere well to the patterned surfaces independent of the roughness ratio and wettability. These experimental findings are correlated with micromechanical measurements performed on the unstructured and replicated surfaces and discussed on the basis of previous observations describing the relation of cell response to surface energy and rigidity.

The surface topography of biomaterials can have an important impact on cellular adhesion, growth and proliferation. Apart from the overall roughness, the detailed morphological features, at all length scales, significantly affect the cell-biomaterial interactions in a plethora of applications including structural implants, tissue engineering scaffolds and biosensors. In this study, we present a simple, one-step direct laser patterning technique to fabricate nanoripples and dual-rough hierarchical micro/nano structures to control SW10 cell attachment and migration. It is shown that, depending on the laser processing conditions, distinct cell-philic or cell-repellant patterned areas can be attained with a desired motif. We envisage that our technique could enable spatial patterning of cells in a controllable manner, giving rise to advanced capabilities in cell biology research.