Search

MOF-199 is considered to be an excellent CO 2 adsorbent owing to its substantial specific surface area, suitable pore structure and abundant sorption sites. However, powdered MOF-199 is prone to agglomeration and has poor recyclability. Herein, we proposed a MOF-199-based adsorbent by combining the MOF synthesis process with traditional papermaking process. Through such a design, MOF-199 particles are adhered on the surface of wood pulp fiber. The sufficient hydroxyl groups and electrostatic forces of cellulose facilitates the homogeneous and tight adhesion of MOF crystals. The optimal MP-4 sample demonstrated a high CO 2 adsorption capacity (1.80 mmol·g --1 at 25 °C) and good CO 2 /N 2 selectivity (30.06). Moreover, the composite sorbent can be easily regenerated. The adsorption mechanism was analyzed by the density functional theory approach. The simulation results showed that the carboxyl functional groups with a large number of oxygen atoms and active metal sites are the key to boost the CO 2 adsorption performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Assessments of greenhouse gas (GHG) emissions in managed areas are facing various challenges. A non-flow-through, non-steady-state (NFT-NSS) chamber coupled to a frame permanently inserted into the landfilled substrates is a standard method for quantifying GHG emissions in managed areas, such as pulp and paper mill sludge (PPMS) landfill sites. Frequent measurements are needed to minimize uncertainties on GHG emission factors at the landfill site scale. However, maintaining a frame inserted into the substrates for a long time period is often impossible due to landfilling management operations. Therefore, GHG measurements using NFT-NSS chambers placed directly on substrates' surface could be an interesting option. Our objectives were to determine the relationships between CO 2 , CH 4 , and N 2 O fluxes measured with (F + ) and without (F-) a frame inserted in the substrates' surface and to develop correction factors for fluxes measured without a frame. Measurements were made at different PPMS landfill sites in the province of Québec, Canada. Stronger GHG flux relationships were observed at the provincial (across sites) than the specific site scale: the variance in GHG fluxes from F- chambers explained up to 80 % of variance in fluxes from F + chambers. The measured CO 2 , CH 4 , and N 2 O fluxes in F- chambers were on average 53, 78, and 63 % lower, respectively, than those estimated by the models at provincial scale. The correction factors developed with this approach could greatly extend the number of sites where in situ GHG measurements can be done and would help refining GHG inventories at the provincial and national levels., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Recycling is a commonly acknowledged strategy to reduce the environmental impacts linked to primary resource exploitation. Large regional variations can be observed in recycling processes' parameters, like efficiency, energy mix and treatment of rejects. Life-cycle assessment (LCA) is widely used to evaluate the environmental impacts of recycling processes, but existing studies are neither harmonized nor sufficient to provide a comprehensive geographical and technological coverage of recycling processes. The purpose of this research is to develop an efficient and iterative approach for the parametrized generation of semi-automated regionalized life-cycle inventories that take into account technological and geographical variabilities in the recycling sector. The regionalization framework is then applied to create a parametrized paper recycling regionalization tool. This tool is used in the results section to compare the national climate change impacts of recycling three paper grades. Results show a significant global warming impact variability between countries for recycled graphic paper (0.36 to 2.25 kg CO 2 -Eq/kg wastepaper recycled), newsprint (0.27 to 1.84 kg CO 2 -Eq/kg wastepaper recycled) and corrugated cardboard (0.28 to 1.68 kg CO 2 -Eq/kg wastepaper recycled) productions. A regionalized LCA of the international recycling of the mixed wastepaper exported from Quebec's (Canada) sorting centers is also performed with the tool and compared to the non-regionalized mixed wastepaper recycling process available in the ecoinvent database. Only nine midpoint ReCiPe impact categories remain environmentally advantageous compared to virgin paper production when applying the regionalization methodology, compared to sixteen when using the ecoinvent process, illustrating how regionalization can substantially influence LCA results., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

A scalable, and cost-effective method was employed to prepare self-supported CuSn bimetallic catalyst on carbon paper. The obtained CuSn catalyst demonstrates high faradaic efficiency of CO around or above 90% at a broad potential range from -0.7 to -1.8 V vs. reversible hydrogen electrode, greatly surpassing Cu or Sn counterparts.

In this work, we examine two modifications of fine-ground calcium carbonate material (GCC) in order to enhanced sorption of NO 2 and subsequent reaction properties toward NO 2 - /NO 3 - formation by firstly exposing the GCC to supercritical (sc) CO 2 in order to increase particle surface area, a choice specifically made to avoid altering the surface chemistry, and secondly considering the potential advantage of using a surface coupling agent toward NO 2 . The modification by the coupling agent amino silane (AMEO silane) was applied in a supercritical CO 2 -ethanol mixture. The samples were characterised before and after modification by field emission scanning electron microscopy (FESEM), specific surface area determination (BET nitrogen adsorption), ATR-FTIR spectroscopy and ion chromatography to reveal the effects of the surface modification(s) on the morphology, surface textural properties and sorption versus reaction properties with NO 2 . The performance of the treated sorbents for NO 2 capture was evaluated at room temperature. Results show that reactivity of NO 2 with GCC was observed to increase as a function of increased surface area resulting from scCO 2 exposure, but that the presence of AMEO silane on the surface, while enhancing initial adsorption of NO 2 was seen subsequently to act to block reactivity. Thus, judicious use of coupling agent can provide desired rapid initial adsorption of the gas, but the goal of long-term CaCO 3 -consuming reactivity, so as to prolong the uptake of NO 2 beyond surface saturation alone, is achieved by increasing surface area while retaining chemical-free exposed CaCO 3 surface., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study aimed to maximise the amount of CO 2 storage by indirect carbonation using paper sludge ash (PSA), which is an alkaline industrial waste. The properties of the following three types of solvents were considered: acids (acetic acid and hydrochloric acid), ammonium salts (ammonium chloride and ammonium acetate) and others (sodium citrate and water). When carbon dioxide was injected into calcium leachates prepared from PSA using acids, carbonation did not occur, and using ammonium salts as solvent, the carbonation efficiency was low. However, after pH swing of the leachates using sodium hydroxide and ammonia solution for acid and ammonium salt solvents, up to 324 kg CO 2 /(ton PSA) and 175 kg CO 2 /(ton PSA) were stored, respectively. When carbon dioxide was injected into calcium leachates prepared from PSA using sodium citrate or water, solid was initially generated which later dissolved. In order to solve this problem, CO 2 injection was stopped just before the pH of the solution reached 10.5 for sodium citrate and 8.3 for water, resulting in the storage of 136 kg CO 2 /(ton PSA) and 29 kg CO 2 /(ton PSA), respectively. Solids obtained through carbonation were pure calcium carbonate.

The CO 2 concentration in the atmosphere is increasing and threatening the earth's climate. Selective CO 2 capture at large point sources will help to reduce the CO 2 emissions to the atmosphere. Biochar with microporous structure could be a potential material to capture CO 2 . The impact of feedstock type, pyrolysis temperature and steam activation of biochars were evaluated for CO 2 adsorption capacity. Pine sawdust biochars were produced at 550 °C, and steam activated for 45 min at the same temperature after completing the pyrolysis (PS550 and PSS550). Paper mill sludge biochars were produced at 300 and 600 °C (PMS300 and PMS600). The CO 2 adsorption capacity of biochars was tested at 25 °C using a volumetric sorption analyzer. Pine sawdust biochars showed significantly higher CO 2 adsorption capacity than paper mill sludge biochars due to high surface area and microporosity. Pine sawdust biochars were then evaluated for dynamic adsorption under representative post-combustion flue gas concentration conditions (15% CO 2 , 85% N 2 ) using a breakthrough rig. Both materials showed selective CO 2 uptake over N 2 which is the major component along with CO 2 in flue gas. PSS550 had slightly higher CO 2 adsorption capacity (0.73 mmol g^ -1 vs 0.67 mmol g^ -1 ) and CO 2 over N 2 selectivity (26 vs 18) than PS550 possibly due to increase of microporosity, surface area, and oxygen containing basic functional groups through steam activation. Pine sawdust biochar is an environmentally friendly and low-cost material to capture CO 2 ., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

The removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) from solid matrices has received considerable attention because of the environmental persistence, bioaccumulation, and potential toxicity of these compounds. This study presents a simple method using concentrated HNO(3) as a suppression agent, and methanol-modified supercritical carbon dioxide (Sc-CO(2)) extraction for removing PFOS and PFOA from solid matrices. The optimal conditions were 16 M HNO(3) and 20% (v/v) methanol containing Sc-CO(2), under a pressure of 20.3 MPa and a temperature of 50 °C. Extraction time was set at 70 min (40 min for static and 30 min for dynamic extraction). PFOA and PFOS were identified and quantitated by liquid chromatography/mass spectrometry. The extraction efficiencies (with double extractions) were close to 100% for PFOA and 80% for PFOS for both paper and fabric matrices. The extraction efficiencies for sand were approximately 77% for PFOA and 59% for PFOS. The results show that this method is accurate, and effective, and that it provides a promising and convenient approach to remediate the environment of hazardous PFOA and PFOS contamination., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

In this study, experiments were conducted to investigate the applicability of low-cost alkaline paper mill wastes as acidity neutralizing agents for treatment of acid mine drainage (AMD). Paper wastes include a calcium mud by-product from kraft pulping, and a calcite powder from a previous study focused on sequestering CO(2) by carbonation of calcium mud. The neutralization process consisted of increase of pH by alkaline additive dissolution, decrease of metals solubility and precipitation of gypsum and poorly crystallized Fe-Al oxy-hydroxides/oxy-hydroxysulphates, which acted as a sink for trace elements to that extent that solutions reached the pre-potability requirements of water for human consumption. This improvement was supported by geochemical modelling of solutions using PHREEQC software, and observations by scanning electron microscope and X-ray diffraction of reaction products. According to PHREEQC simulations, the annual amount of alkaline additive is able to treat AMD (pH 3.63, sulphate 3800 mg L(-1), iron 348 mg L(-1)) with an average discharge of about 114 and 40 Ls(-1) for calcium mud and calcite powder, respectively. Likewise, given the high potential of calcium mud to sequester CO(2) and of resulting calcite powder to neutralize AMD, paper wastes could be a promising solution for facing this double environmental problem., (Copyright (c) 2009 Elsevier B.V. All rights reserved.)

Paper, a cheap and ubiquitous material, has great potential to be used as low-cost, portable and biodegradable platform for chemical and biological sensing application. In this paper, we are exploring a low-cost, flexible and reliable method to effectively pattern paper for capturing optical dyes and for flow-based delivery of target samples for colorimetric chemical sensing. In this paper, we target the detection of ammonia (NH3) and carbon dioxide (CO2), two of the important environmental and health biomarkers. By functionalizing the paper platform with diverse cross-reactive dyes sensitive to NH3 and CO2, their selective sensing within a certain pH range, as well as their detection at different concentrations can be achieved. The images of paper based device were captured by a flatbed scanner and processed in MATLAB(®) using a RGB model and PCA for quantitative analysis. Paper based devices with readout using ubiquitous consumer electronic devices (e.g. smartphones, flatbed scanner) are considered promising approaches for disease screening in developing countries with limited resources., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Greenhouse gas (GHG) emissions have been established for recycling of paper waste with focus on a material recovery facility (MRF). The MRF upgrades the paper and cardboard waste before it is delivered to other industries where new paper or board products are produced. The accounting showed that the GHG contributions from the upstream activities and operational activities, with global warming factors (GWFs) of respectively 1 to 29 and 3 to 9 kg CO(2)-eq. tonne(- 1) paper waste, were small in comparison wih the downstream activities. The GHG contributions from the downstream reprocessing of the paper waste ranged from approximately 490 to 1460 kg CO(2)-eq. tonne( -1) of paper waste. The system may be expanded to include crediting of avoided virgin paper production which would result in GHG contributions from -1270 to 390 kg CO(2)-eq. tonne(- 1) paper waste. It may also be assumed that the wood not used for virgin paper production instead is used for production of energy that in turn is assumed to substitute for fossil fuel energy. This would result in GHG contributions from -1850 to -4400 kg CO(2)-eq. tonne(- 1) of paper waste. These system expansions reveal very large GHG savings, suggesting that the indirect upstream and operational GHG contributions are negligible in comparison with the indirect downstream emissions. However, the data for reprocessing of paper waste and the data for virgin paper production are highly variable. These differences are mainly related to different energy sources for the mills, both in regards to energy form (heat or electricity) and fuel (biomass or fossil fuels).

The objective of this research was to apply Fourier transform infrared spectroscopy (FTIR) and tunable infrared laser differential absorption spectroscopy (TILDAS) for measuring selected gaseous constituents in mainstream (MS) and sidestream (SS) smoke for experimental cigarettes designed to reduce MS CO using iron oxide cigarette papers. These two complimentary analytical techniques are well suited for providing per puff smoke deliveries and intra-puff evolution profiles in cigarette smoke respectively. The quad quantum cascade (QC) laser high resolution infrared spectroscopy system has the necessary temporal and spectral resolution and whole smoke analysis capabilities to provide detailed information for CO and CO(2) as they are being formed in both MS and SS smoke. The QC laser system has an optimal data rate of 20 Hz and a unique puffing system, with a square wave shaped puff, that allows whole smoke to enter an 18 m, 0.3 L multi-pass gas cell in real time (0.1s cell response time) requiring no syringe or Cambridge filter pad. Another similar multi-pass gas cell with a 36 m pathlength simultaneously monitors the sidestream cigarette smoke. The smoke from experimental cigarettes manufactured with two types of iron oxide papers were compared to the smoke from cigarettes manufactured similarly without iron oxide in the paper using both instrument systems. The delivery per puff determined by the QC laser method agreed with FTIR results. MS CO intra-puff evolution profiles for iron oxide prototype cigarettes demonstrated CO reduction when compared to cigarettes without iron oxide paper. Additionally, both CO and CO(2) intra-puff evolution profiles of the cigarettes with iron oxide paper showed a significant reduction at the initial portion of the 2 s puff not observed in the non-iron oxide prototype cigarettes. This effect also was observed for ammonia and ethylene, suggesting that physical parameters such as paper porosity and burn rate are important. The SS CO and CO(2) deliveries for the experimental cigarettes evaluated remained unaffected. The iron oxide paper technology remains under development and continues to be evaluated.

The present work introduces the study of the CO2 capture process by zeolites synthesized from paper sludge and scrap glass. Zeolites ZSM-5, analcime and wairakite were produced by means of two types of Structure Directing Agents (SDA): tetrapropilamonium (TPA) and ethanol. On the one hand, zeolite ZSM-5 was synthesized using TPA; on the other hand, analcime and wairakite were produced with ethanol. The temperature programmed desorption (TPD) technique was performed for determining the CO2 sorption capacity of these zeolites at two sorption temperatures: 50 and 100 °C. CO2 sorption capacity of zeolite ZSM-5 synthesized at 50 °C was 0.683 mmol/g representing 38.2% of the value measured for a zeolite ZSM-5 commercial. Zeolite analcime showed a higher CO2 sorption capacity (1.698 mmol/g) at 50 °C and its regeneration temperature was relatively low. Zeolites synthesized in this study can be used in the purification of biogas and this will produce energy without increasing the atmospheric CO2 concentrations., (© The Author(s) 2014.)

Anthropogenic activities are altering levels of atmospheric carbon dioxide (CO 2 ) and tropospheric ozone (O 3 ). These changes can alter phytochemistry, and in turn, influence ecosystem processes. We assessed the individual and combined effects of elevated CO 2 and O 3 on the phytochemical composition of two tree species common to early successional, northern temperate forests. Trembling aspen (Populus tremuloides) and paper birch (Betula papyrifera) were grown at the Aspen FACE (Free-Air Carbon dioxide and ozone Enrichment) facility under four combinations of ambient and elevated CO 2 and O 3 . We measured, over three years (2006-08), the effects of CO 2 and O 3 on a suite of foliar traits known to influence forest functioning. Elevated CO 2 had minimal effect on foliar nitrogen and carbohydrate levels in either tree species, and increased synthesis of condensed tannins and fiber in aspen, but not birch. Elevated O 3 decreased nitrogen levels in both tree species and increased production of sugar, condensed tannins, fiber, and lignin in aspen, but not birch. The magnitude of responses to elevated CO 2 and O 3 varied seasonally for both tree species. When co-occurring, CO 2 offset most of the changes in foliar chemistry expressed under elevated O 3 alone. Our results suggest that levels of CO 2 and O 3 predicted for the mid-twenty-first century will alter the foliar chemistry of northern temperate forests with likely consequences for forest community and ecosystem dynamics.

This study analyzes the convergence of carbon dioxide (CO 2 ) emissions by examining the stationarity of the relative per capita CO 2 emissions of 18 selected countries on the Silk Road for the period 1990-2020. To examine the stationarity of relative per capita CO 2 emissions for those 18 countries, we applied a large battery the newly proposed nonlinear panel unit root tests that allow for several forms of state-dependent and time-dependent nonlinearities. We also applied conventional linear panel unit root tests. The linear and nonlinear panel unit root tests account for cross-country dependencies, and the SPSM procedure is applied to these tests in order to see how many countries in the panel sample are converging to the steady state. The test results of linear and nonlinear panel unit root test reveal that the relative per-capita CO 2 emissions of 10 out of 18 countries are stationary meaning that the CO 2 emissions of these 10 countries converge to the steady-state level over time. Especially, size and sign nonlinearities better capture the convergence dynamics of per capita CO 2 emissions towards the steady-state level for seven countries. As we have found that 56% of countries' per capita CO 2 emissions are converging, this result has important policy implications., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This paper examines the impact of the CO2 laser parameters on the tensile strength, which is one of the most important properties of paper packaging in the process of cutting paper material. The study was performed on a paper material sample Fbb Board/Ningbo Spark C1S Ivory Board by examination of the influence of four independent variables: paper material grammage, cutting speed, laser power, and resolution on the tensile strength by using definitive screening design. Optimum process conditions of four variables that maximize the tensile strength were predicted and validated accordingly. Results confirm that laser power, paper material grammage, and cutting speed are the main process parameters that mostly affect the tensile strength. Besides individual parameters, two statistically significant interactions were obtained: laser power and cutting speed, and cutting speed and laser resolution. Maximum tensile strength values (20.37 N/mm) were achieved using the laser power of 60.6%, cutting speed of 3.24%, resolution of 2500 Hz, and a paper material grammage of 326.85 g/m2. With laser power at middle values and at a lower speed, a maximum tensile strength value can be obtained. Increasing the laser power and cutting speed will produce a slight lowering of tensile strength. [ABSTRACT FROM AUTHOR]

The objective of the work was to provide a method to predict CO2 and NH3 yields during composting of the biodegradable fraction of municipal solid wastes (MSW). The compostable portion of MSW was simulated using three principal biodegradable components, namely mixed paper wastes, yard wastes and food wastes. Twelve laboratory runs were carried out at thermophilic temperatures based on the principles of mixture experimental and full factorial designs. Seeded mixed paper (MXP), seeded yard waste (YW) and seeded food waste (FW), each composted individually, produced 150, 220 and 370 g CO2-C, and 2.0, 4.4 and 34 g NH3-N per dry kg of initial substrate, respectively. Several experimental runs were also carried out with different mixtures of these three substrates. The effect of seeding was insignificant during composting of food wastes and yard wastes, while seeding was necessary for composting of mixed paper. Polynomial equations were developed to predict CO2 and NH3 (in amounts of mass per dry kg of MSW) from mixtures of MSW. No interactions among components were found to be significant when predicting CO2 yields, while the interaction of food wastes and mixed paper was found to be significant when predicting NH3 yields.

Composite materials have been widely used because of their superior properties compared to those of the original material. Separation of the constituent materials is not easy in the recycling process, and such an effort lowers economic viability. As such, this study employed a pyrolysis as a valorizing method for the composite material. Disposable paper cup waste (DPCW) was chosen as the model compound for paper-plastic composites. To offer green/sustainable features, CO2 was employed as a raw and reactive material in the pyrolysis process. It was proved that DPCW primarily composed of cellulose (outer layer) and polyethylene (inner layer). In the single-stage and multistage pyrolysis of DPCW, the CO2 reactivity in the homogeneous reaction of CO2 and DPCW-derived volatiles was not rapid. To accelerate the reaction kinetics governing the reactivity of CO2, the catalytic pyrolysis of DPCW over Ni/SiO2 was performed. The formation of syngas increases significantly, suggesting that CO2 reactivity was catalytically enhanced. The generation of syngas (enhanced by CO2) was inversely related to the DPCW oil generation, indicating that more carbon was assigned from the oil to the gaseous pyrogenic products. The study results would offer a strategic means to valorize paper-plastic composites and CO2 into energy through pyrolysis. [ABSTRACT FROM AUTHOR]

Old corrugated containers with low recyclability were used as raw materials to synthesize a series of aerogels with varying cellulose concentrations in NaOH/urea solution via a freeze-drying process. The resulting aerogels had a rich porous structure with specific surface areas in the range of 132.72-245.19 m 2 .g -1 and mesopore volumes in the range of 0.73-1.53 cm 3 .g -1 , and were tested for CO 2 sorption at ambient temperature and pressure, displaying excellent CO 2 adsorption capacities in the range of 1.96-11.78 mmol.g -1 . Furthermore, the CO 2 /N 2 selectivity of aerogels decreased with decreasing specific surface area, which was mainly caused by the decrease in CO 2 capture. In addition, the CO 2 sorption capacity of the sample with 2% cellulose content, CA-2, exceeded the values reported so far for many other sorbents with higher specific surface areas, and showed reasonable cyclic stability for CO 2 capture. Therefore, this adsorbent represents an attractive prospect for CO 2 uptake at room temperature., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

There is concern that the carbon prices generated through climate policies are too low to create the incentives necessary to stimulate technological development. This paper empirically analyzes how the Swedish carbon dioxide (CO2) tax and the European Union emission trading system (EU ETS) have affected productivity development in the Swedish pulp and paper industry 1998-2008. A Luenberger total factor productivity (TFP) indicator is computed using data envelopment analysis. The results show that climate policy had a modest impact on technological development in the pulp and paper industry, and if significant it was negative. The price of fossil fuels, on the contrary, seems to have created important incentives for technological development. Hence, the results suggest that the carbon prices faced by the industry through EU ETS and the CO2 tax have been too low. Even though the data for this study is specific for Sweden, the models and results are applicable internationally. When designing policy to mitigate CO2 emissions, it is vital that the policy creates a carbon price that is high enough - otherwise the pressure on technological development will not be sufficiently strong., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Globally, the carbon footprint (CF) is constantly increasing, contrasting with the decreasing trend observed for decades in the European Union (EU) countries, where EU guidelines are responsibly followed and outlined in its strategic documents. Information and communication technology (ICT) carbon emissions have historically increased in parallel with global emissions, contributing to continuous increases in ICT's CF over time, even when excluding full life cycle emissions. This study examines the impact of ICT on household electricity consumption, aiming to quantify the potential reduction of greenhouse gas (GHG) emissions through improved household energy efficiency. The methodology includes the data collection on ICT device usage in households within the city of Novi Sad (Republic of Serbia), employing the survey method that queries respondents on device quantities and their usage patterns. This study provides results for decision-makers to recognize concrete benefits from the transition to a circular economy (CE) and low-carbon emissions, which are reflected as benefits for the local community and socio-economic environment., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

A paper-based electrochemical dual-function biosensor capable of determining pH and TCO 2 was synthesized for the first time using an iridium oxide pH electrode and an all-solid-state ion electrode (ASIE). In the study, to obtain highly reliable results, the biosensor was equipped with a real-time pH correction function before TCO 2 measurements. Compared to traditional liquid-filling carbon dioxide detection sensors, the utilization of ferrocene endows our novel sensor with abundant positive sites, and thus greatly improves its performance. Conversely, the introduction of MXene with conductivity close to that of metals reduces electrode resistance, which is beneficial for accelerating the electrochemical reaction of the sensor and reducing LOD. After optimization, the detection range of TCO 2 is 0.095 nM-0.66 M, with a detection limit of as low as 0.023 nM. In addition, the sensor was used in real serum sample-spiked recovery experiments and comparison experiments with existing clinical blood gas analyzers, which confirmed the effectiveness of its clinical application. This study provides a method for the rational design of paper-based electrochemical biosensors and a new approach for the clinical detection of blood carbon dioxide., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

The present energy demand of the world is increasing but the fossil fuels are gradually depleting. As a result, the need for alternative fuels and energy sources is growing. Fuel cells could be one alternative to address the challenge. The fuel cell can convert CO 2 to value-added chemicals. The potential of bio-fuel cells, specifically enzymatic fuel cells and microbial fuel cells, and the importance of immobilization technology in bio-fuel cells are highlighted. The review paper also includes a detailed explanation of the microbial electrosynthesis system to reduce CO 2 and the value-added products during microbial electrosynthesis. Future research in bio-electrochemical synthesis for CO 2 conversion is expected to prioritize enhancing biocatalyst efficiency, refining reactor design, exploring novel electrode materials, understanding microbial interactions, integrating renewable energy sources, and investigating electrochemical processes for carbon capture and selective CO 2 reduction. The challenges and perspectives of bio-electrochemical systems in the application of CO 2 conversion are also discussed. Overall, this review paper provides valuable insights into the latest developments and criteria for effective research and implementation in bio-fuel cells, immobilization technology, and microbial electro-synthesis systems., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Fossil fuels-coal, oil and gas-supply most of the world's energy and also form the basis of many products essential for everyday life. Their use is the largest contributor to the carbon dioxide emissions that drive global climate change, prompting joint efforts to find renewable alternatives that might enable a carbon-neutral society by as early as 2050. There are clear paths for renewable electricity to replace fossil-fuel-based energy, but the transport fuels and chemicals produced in oil refineries will still be needed. We can attempt to close the carbon cycle associated with their use by electrifying refinery processes and by changing the raw materials that go into a refinery from fossils fuels to carbon dioxide for making hydrocarbon fuels and to agricultural and municipal waste for making chemicals and polymers. We argue that, with sufficient long-term commitment and support, the science and technology for such a completely fossil-free refinery, delivering the products required after 2050 (less fuels, more chemicals), could be developed. This future refinery will require substantially larger areas and greater mineral resources than is the case at present and critically depends on the capacity to generate large amounts of renewable energy for hydrogen production and carbon dioxide capture., (© 2024. Springer Nature Limited.)

Using historical data on energy from (Malanima 2020) and GDP from the Maddison Project Database, this paper investigates the energy-growth nexus in a less-studied region, mainly Australia and New Zealand, since 1870. The long annual series allow meaningful application of recently developed time-varying and quantile Granger causality analysis. Results indicate that there is a bi-directional Granger causal relationship between economic growth and energy, coal, and oil consumption at both ends of the distribution, and during various time periods over the past 150 years. Little evidence is found on the Granger causal relationship from gas consumption to economic growth, but some evidence on the direction from economic growth to gas consumption. The Granger causal relationships between electricity consumption and GDP change over time, but results suggest much closer links between the two in most recent decades, and big (positive and negative) changes in electricity consumption significantly Granger causes economic growth., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

As globalization proceeds, increasing biomass energy consumption is an important pathway to replace fossil fuels for tackling climate change by reducing emissions. This study explores the spatial spillover effect in biomass energy carbon reduction, which is frequently ignored when investigating environmental factors. It uncovers whether globalization and its dimensions can strengthen the spatial effect of biomass energy carbon reduction. Besides, we reveal whether biomass energy consumption can promote CO 2 emissions reduction while ensuring economic progress. Results show that (1) owing to the spillover effect, biomass energy consumption plays a significant role in direct and indirect enhancing carbon emissions reduction, with their feedback effects of - 0.003 or 3.3% of the direct effect. (2) Increasing overall, social and political globalization enhances biomass energy consumption's carbon reduction effect. (3) In countries with higher economic development, overall, economic and political globalization has a better promotion in the spatial effect of biomass energy carbon reduction. (4) Developing biomass energy can support the environment quality while enhancing economic growth., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study investigates the effects of environmental tax and environmental spending on CO2 emissions of 27 countries of the European Union EU27 countries using annual time series data from 1995 to 2022. The study used linear and non-linear autoregressive distributive lag (ARDL and NARDL) to examine the relationship. Estimates claim that the variables have a symmetric and asymmetric long-term and short-term relationship. The negative impacts of environmental taxes on CO2 emissions prove that emissions are reduced when polluting activities are taxed. Fiscal policy instrument such as taxation changes the behaviour of the private sector in the EU27 nations by disincentivizing polluting activities. On the other hand, government investment in environmental protection has encouraged the private sector in the EU27 nations to embrace and invest in green technologies, decreasing CO2 emissions. The ECM term is negative and statistically significant at a 1 percent significance level for ARDL and NARDL models, implying a stable long-run relationship between variables. It demonstrates that short-run disequilibrium converges to long-run equilibrium at a speed of 9.2% (in the ARDL model) and 22.7% (in the NARDL model). The study also sheds fresh light on the effectiveness of environmental taxes vs. expenditure, where taxes serve as a counter-incentive policy for CO2 emissions, and spending is a positive policy intervention., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The European Council completed the legislative procedure to establish the Carbon Border Adjustment Mechanism (CBAM) on April 25, 2023, which will be launched in 2027. The iron and steel sector is the main target of the forthcoming CBAM due to the industry's energy-intensive consumption with high carbon dioxide (CO 2 ) emissions. However, minimal existing research has been conducted in this regard. This study employs GTAP-e 11.0 and TOPSIS models to estimate the effects of CBAM implementation on the major nations around the world from 2027 to 2030, examining countries' GDP, social welfare, iron and steel production, trade balance, and CO 2 emissions to the global environment. This study concludes: (1) The GDP and social welfare of important iron and steel trade partners throughout the world will be significantly impacted by the application of CBAM. Most nations, including those in the EU, will experience negative GDP effects, with China undergoing the most pronounced social welfare declines followed by India. In contrast, the EU27 will benefit the most in terms of social welfare, followed by the US, Japan, and Russia. (2) Iron and steel production will decrease in all countries outside the EU, but it will have a positive impact on the trade balance of most countries. (3) The CO 2 emissions of all countries except for the EU and Japan will decrease, with a positive impact on preventing carbon leakage in the international iron and steel trade. (4) Comprehensive analysis demonstrates that the EU will benefit the most, and China will suffer the most from CBAM application. Based on the above conclusions, this study proposes corresponding policy recommendations., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

To find a way to realize sustainable development, this paper applied a cross-sectional ARDL (CS-ARDL) method to explore the interaction between carbon emissions, economic development, and health care expenditure for OECD countries. Firstly, we conduct a cross-sectional test to check whether the data is confronted with this issue. Secondly, we conduct a panel unit root test and cointegration test to confirm whether the ARDL-based method is suitable for our data. Thirdly, we analyze the results and provide possible explanations. Lastly, we conduct a short-term causality test to detect the connection between different variables. The main conclusion of our study includes: 1) Health care is a necessity in OECD countries. 2) Environmental deterioration places a heavy burden on health care expenditure in OECD countries. 3) Health care expenditure of last year negatively affects health care expenditure. 4) There is a short-run causality relationship from CO 2 , economic development, and dependency rate of youth to health care expenditure in OECD countries. Related policy proposals are provided according to our analysis of the results., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The EKC hypothesis expresses the inverted U-shaped relationship between per capita income and environmental quality. In the literature, the role of technological innovations and income inequality on pollution is a relatively recent discussion in the studies testing the EKC hypothesis. The aim of this paper is to investigate the impact of technological innovations, income inequality, exports, urbanization, and growth on CO 2 emissions in EU-27. In addition, while investigating this relationship, exports and urbanization are also considered and panel vector autoregression (PVAR) analysis is applied for the 2005-2019 period. According to the coefficient estimation results, while income inequality, exports, and urbanization increase pollution, technological innovations contribute to environmental quality. Also, the results demonstrated that the EKC hypothesis is invalid in these countries and there is a U-shaped relationship between growth and emissions. The causality test results revealed the presence of unidirectional causality running from all explanatory variables to CO 2 emissions. Moreover, impulse-response graphs demonstrated that the reply of emissions to the shocks in the explanatory variables is similar to the long-run coefficient results. In conclusion, all available empirical evidence for this relationship highlights that income inequality and technological innovations should be considered in policy-making processes to ensure environmental quality in EU-27 countries., (© 2024. The Author(s).)

Gene expression responses of paper birch (Betula papyrifera) leaves to elevated concentrations of CO(2) and O(3) were studied with microarray analyses from three time points during the summer of 2004 at Aspen FACE. Microarray data were analyzed with clustering techniques, self-organizing maps, K-means clustering and Sammon's mappings, to detect similar gene expression patterns within sampling times and treatments. Most of the alterations in gene expression were caused by O(3), alone or in combination with CO(2). O(3) induced defensive reactions to oxidative stress and earlier leaf senescence, seen as decreased expression of photosynthesis- and carbon fixation-related genes, and increased expression of senescence-associated genes. The effects of elevated CO(2) reflected surplus of carbon that was directed to synthesis of secondary compounds. The combined CO(2)+O(3) treatment resulted in differential gene expression than with individual gas treatments or in changes similar to O(3) treatment, indicating that CO(2) cannot totally alleviate the harmful effects of O(3)., (2009 Elsevier Ltd. All rights reserved.)

We studied the effects of long-term exposure (nine years) of birch (Betula papyrifera) trees to elevated CO(2) and/or O(3) on reproduction and seedling development at the Aspen FACE (Free-Air Carbon Dioxide Enrichment) site in Rhinelander, WI. We found that elevated CO(2) increased both the number of trees that flowered and the quantity of flowers (260% increase in male flower production), increased seed weight, germination rate, and seedling vigor. Elevated O(3) also increased flowering but decreased seed weight and germination rate. In the combination treatment (elevated CO(2)+O(3)) seed weight is decreased (20% reduction) while germination rate was unaffected. The evidence from this study indicates that elevated CO(2) may have a largely positive impact on forest tree reproduction and regeneration while elevated O(3) will likely have a negative impact.

We investigated the interactive effects of elevated concentrations of carbon dioxide ([CO(2)]) and ozone ([O(3)]) on radial growth, wood chemistry and structure of five 5-year-old trembling aspen (Populus tremuloides Michx.) clones and the wood chemistry of paper birch (Betula papyrifera Marsh.). Material for the study was collected from the Aspen FACE (free-air CO(2) enrichment) experiment in Rhinelander, WI, where the saplings had been exposed to four treatments: control, elevated [CO(2)] (560 ppm), elevated [O(3)] (1.5 x ambient) and their combination for five growing seasons. Wood properties of both species were altered in response to exposure to the treatments. In aspen, elevated [CO(2)] decreased uronic acids (constituents of, e.g., hemicellulose) and tended to increase stem diameter. In response to elevated [O(3)] exposure, acid-soluble lignin concentration decreased and vessel lumen diameter tended to decrease. Elevated [O(3)] increased the concentration of acetone-soluble extractives in paper birch, but tended to decrease the concentration of these compounds in aspen. In paper birch, elevated [CO(2)] decreased and elevated [O(3)] increased starch concentration. The responses of wood properties to 5 years of fumigation differed from those previously reported after 3 years of fumigation.

Atmospheric CO2 and tropospheric O3 are rising in many regions of the world. Little is known about how these two commonly co-occurring gases will affect reproductive fitness of important forest tree species. Here, we report on the long-term effects of CO2 and O3 for paper birch seedlings exposed for nearly their entire life history at the Aspen FACE (Free Air Carbon Dioxide Enrichment) site in Rhinelander, WI. Elevated CO2 increased both male and female flower production, while elevated O3 increased female flower production compared to trees in control rings. Interestingly, very little flowering has yet occurred in combined treatment. Elevated CO2 had significant positive effect on birch catkin size, weight, and germination success rate (elevated CO2 increased germination rate of birch by 110% compared to ambient CO2 concentrations, decreased seedling mortality by 73%, increased seed weight by 17%, increased root length by 59%, and root-to-shoot ratio was significantly decreased, all at 3 weeks after germination), while the opposite was true of elevated O3 (elevated O3 decreased the germination rate of birch by 62%, decreased seed weight by 25%, and increased root length by 15%). Under elevated CO2, plant dry mass increased by 9 and 78% at the end of 3 and 14 weeks, respectively. Also, the root and shoot lengths, as well as the biomass of the seedlings, were increased for seeds produced under elevated CO2, while the reverse was true for seedlings from seeds produced under the elevated O3. Similar trends in treatment differences were observed in seed characteristics, germination, and seedling development for seeds collected in both 2004 and 2005. Our results suggest that elevated CO2 and O3 can dramatically affect flowering, seed production, and seed quality of paper birch, affecting reproductive fitness of this species.

A free-standing cathode without any binder, conductor, and current collector is attractive due to its reduced weight and cost. This study introduces nitrogen-rich and hierarchical porous carbon fibers in the form of a free-standing carbon paper synthesized by NaBH 4 -aided electrospinning and subsequent CO 2 annealing. This modified process leads to a large mesopore volume of 1.007 cm3 g−1 and exposes the nitrogen inside the polymer to the surface of the fiber, resulting in the outstanding surface nitrogen content of 19.38 wt% with abundant pyridinic-N and pyrrolic-N of 16.24 wt% in total surface atoms, while eliminating any further treatment for increasing porosity or coating the polar active sites. The resultant material impregnated by sulfur and filtered by a graphene solution is directly employed as a cathode without any additives. As a result, the capacity is maintained at 696 mAh g−1 up to the 500th cycle at 0.2 C, and 645 mAh g−1 at a high current density of 5.0 C. Even with a high sulfur loading of 6.11 mg cm−2, a remarkable areal capacity of 3.09 mAh cm−2 is recorded after 500 cycles at 0.2 C with the free-standing form preserved. Image 1 • NaBH 4 -added electrospinning and subsequent heat treatment under CO 2 atmosphere. • High meso pore volume of 1.007 cm3 g−1, and surface nitrogen contents of 19.38 wt%. • Employed as a cathode without any additives due to a free-standing paper form. • High sulfur amount of 6.11 mg cm−2, and capacity of 3.09 mAh cm−2 for 500 cycles. [ABSTRACT FROM AUTHOR]

Human activities are increasing the concentrations of atmospheric carbon dioxide ([CO2]) and tropospheric ozone ([O3]), potentially leading to changes in the quantity and chemical quality of leaf litter inputs to forest soils. Because the quality and quantity of labile and recalcitrant carbon (C) compounds influence forest productivity through changes in soil organic matter content, characterizing changes in leaf litter in response to environmental change is critical to understanding the effects of global change on forests. We assessed the independent and combined effects of elevated [CO2] and elevated [O3] on foliar litter production and chemistry in aspen (Populus tremuloides Michx.) and birch-(Betula papyrifera Marsh.) aspen communities at the Aspen free-air CO2 enrichment (FACE) experiment in Rhinelander, WI. Litter was analyzed for concentrations of C, nitrogen (N), soluble sugars, lipids, lignin, cellulose, hemicellulose and C-based defensive compounds (soluble phenolics and condensed tannins). Concentrations of these chemical compounds in naturally senesced litter were similar in aspen and birch-aspen communities among treatments, except for N, the C:N ratio and lipids. Elevated [CO2] significantly increased C:N (+8.7%), lowered mean litter N concentration (-10.7%) but had no effect on the concentrations of soluble sugars, soluble phenolics and condensed tannins. Elevated [CO2] significantly increased litter biomass production (+33.3%), resulting in significant increases in fluxes of N, soluble sugars, soluble phenolics and condensed tannins to the soil. Elevated [O3] significantly increased litter concentrations of soluble sugars (+78.1%), soluble phenolics (+53.1%) and condensed tannins (+77.2%). There were no significant effects of elevated [CO2] or elevated [O3] on the concentrations of individual C structural carbohydrates (cellulose, hemicellulose and lignin). Elevated [CO2] significantly increased cellulose (+37.4%) input to soil, whereas elevated [O3] significantly reduced hemicellulose and lignin inputs to soil (-22.3 and -31.5%, respectively). The small changes in litter chemistry in response to elevated [CO2] and tropospheric [O3] that we observed, combined with changes in litter biomass production, could significantly alter the inputs of N, soluble sugars, condensed tannins, soluble phenolics, cellulose and lignin to forest soils in the future.