Search

The low power photothermal therapy can reduce the tissue damage caused by laser irradiation, thus the near-infrared (NIR) absorbing vehicles with high photothermal conversion efficiency are demanded in the low power treatment. Herein, the NIR-absorbing agent polydopamine (PDA) and carbon dots (CDs) were gated on the openings of hollow mesoporous carbon (HMC) to construct a photothermal enhanced multi-functional system (HMC-SS-PDA@CDs). Interestingly, the fluorescence emission wavelength of HMC-SS-PDA@CDs was red-shifted by FRET effect between PDA and CDs, which solved the dilemma of fluorescence quenching of carbon-based materials and was more conducive to cell imaging. The modification of PDA@CDs not only acts as the gatekeepers to realize multi-responsive release of pH, GSH and NIR, but also endows the HMC vehicle with excellent photothermal generation capacity, the possibility for bio-imaging as well as the enhanced stability. Naturally, both the cytological level and the multicellular tumor sphere level demonstrate that the delivery system has good low-power synergistic therapeutic with combination index (CI) of 0.348 and imaging effects. Meanwhile, the combined treatment group showed the highest tumor inhibition rate of 92.6% at 0.75 W/cm 2 . Therefore, DOX/HMC-SS-PDA@CDs nano-platform had broad application prospects in low power therapy and convenient imaging of carbon-based materials., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this work, a traceable dual-porous mesoporous silica-coated mesoporous carbon nanocomposite (MCN@Si) with high drug loading capacity and high photothermal conversion efficiency (30.5 %) was successfully prepared. Based on the nanocomposite, a pH/redox/near infrared (NIR) multi-stimuli responsive drug delivery system was constructed to realize the accurate drug delivery, drug controlled release and chemo-photothermal synergistic antitumor therapy. MCN@Si was used as a vehicle to load doxorubicin (DOX) with a high drug loading efficacy of 48.2 % and a NIR absorbance agent for photothermal therapy and NIR thermal imaging. Carbon dots (CDs) with proper size were covalently attached to the surface of MCN@Si via disulfide bonds to block the mesopores, preventing DOX premature release from DOX/MCN@Si-CDs. Besides, CDs were served as fluorescent probe to prove the visualization potential of the drug delivery system. DOX was rapidly released at the condition of low pH and high GSH concentration due to the breakage of disulfide bonds and protonation of DOX. Moreover, the local hyperthermia generated by MCN@Si-CDs under NIR irradiation could not only directly kill cells, but also accelerate DOX release and enhance cells sensitivity and permeability. Two-dimensional cells and three-dimensional tumor spheroids assays illustrated that DOX/MCN@Si-CDs + NIR group exhibited a superior thermochemotherapy synergistic treatment effect and the combination index (CI) was 0.378. Biodistribution study showed the biosecurity of preparations and its prolonged detention time in tumor sites. Besides, antitumor experiment in vivo also performed the excellent synergistic inhibition effect. All the results demonstrated that DOX/MCN@Si-CDs is a traceable multi-stimuli responsive nanodelivery system and can achieve efficient chemo-photothermal synergistic antitumor therapy., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Aiming at the inefficiency and toxicity in traditional antitumor therapy, a novel multifunctional nanoplatform was constructed based on hollow mesoporous carbon (HMC) to achieve triple stimuli response and dual model antitumor therapy via chemo-photothermal synergistic effect. HMC was used as an ideal nanovehicle with a high drug loading efficiency as well as a near-infrared (NIR) photothermal conversion agent for photothermal therapy. Acid-dissoluble, luminescent ZnO quantum dots (QDs) were used as the proper sealing agents for the mesopores of HMC, conjugated to HMC via disulfide linkage to prevent drug (doxorubicin, abbreviated as Dox) premature release from Dox/HMC-SS-ZnO. After cellular endocytosis, the Dox was released in a pH, GSH and NIR laser triple stimuli-responsive manner to realize accurate drug delivery. Moreover, the local hyperthermia effect induced by NIR irradiation could promote the drug release, enhance cell sensitivity to chemotherapeutic agents, and also directly kill cancer cells. As expected, Dox/HMC-SS-ZnO exhibited a high drug loading capacity of 43%, well response to triple stimuli and excellent photothermal conversion efficiency η of 29.7%. The therapeutic efficacy in 4T1 cells and multicellular tumor spheroids (MCTSs) demonstrated that Dox/HMC-SS-ZnO + NIR had satisfactory chemo-photothermal synergistic effect with a combination index (CI) of 0.532. The cell apoptosis rate of the combined treatment group was more than 95%. The biodistribution and pharmacodynamics studies showed its biosecurity to normal tissues and synergistic inhibition effect to tumor cells. These distinguished results indicated that the Dox/HMC-SS-ZnO nanoplatform is potential to realize efficient triple stimuli-responsive drug delivery and dual model chemo-photothermal synergistic antitumor therapy., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Oral administration of nanoparticles is extremely limited due to the two processes of mucus permeation and epithelial absorption, which requires completely opposite surface properties of the nanocarriers. To tackle the contradiction, we developed a rational strategy to modify the surface of mesoporous carbon nanoparticles with chitosan concealed by a hydrophilic N-(2-hydroxypropyl) methacrylamide copolymer (pHPMA) layer. Probucol (PB) with the low poor permeability and solubility was loaded in optimal nanocarriers to realize the high loading efficacy and controlled release. The pHPMA polymer is a hydrophilic "mucus-inert" material, which could be dissociable from the surface of nanoparticles in the mucus, thus promoting their mucus permeation and causing exposure of chitosan in transepithelial transport. The swelling effect of chitosan under acidic conditions allowed regulation of PB release behavior. In conclusion, the mucus-permeable nanocarrier could effectively overcome multiple gastrointestinal absorption barriers and the oral bioavailability of PB-loaded HCMCN was 2.76-fold that of commercial preparation., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Mesoporous carriers have been widely used to deliver anticancer drugs due to their unique characteristics. In this work, mesoporous silica nanoparticles (MSN) and mesoporous carbon nanoparticles (MCN) with substantially similar and uniform particle size, specific surface area, and pore size were prepared to compare the photothermal effect, drug loading efficiencies (LE), and drug release properties. In order to improve the dispersion stability and biocompatibility of the carriers, MSN and MCN were grafted with PEG, respectively. The NIR-induced photothermal effect results indicated that MCN had a brilliant photothermal conversion efficiency due to its strong near-infrared absorption capacity, while MSN had no photothermal conversion capability. Moreover, LE of DOX in DOX/MCN-PEG reached 36.58%, higher than that in DOX/MSN-PEG, which was ascribed to non-covalent interaction of π-π stacking and electrostatic attraction. In addition, compared to DOX/MSN-PEG, DOX/MCN-PEG had a significantly increased release rate under NIR laser irradiation due to excellent photothermal conversion capability of MCN-PEG. Furthermore, cell viability assay and cellular uptake experiment results demonstrated that DOX/MCN-PEG showed a synergistic therapeutic effect in the combination of chemotherapy and phototherapy, with a combination index (CI) of 0.238.

In this work, a multi-stimuli responsive drug delivery system (MCHP) was designed for combinational chemotherapy and photothermal therapy (PTT). Mesoporous carbon nanoparticles (MCN) with a high loading efficiency were used as near-infrared (NIR)-responsive drug carriers. Human serum albumin (HSA) was attached to the pore openings of MCN via disulfide bonds to serve as a gatekeeper due to its biocompatibility and appropriate molecular size. To improve the dispersity and biocompatibility, the surface of the MCN was modified with polyethylene glycol (PEG). In vitro photothermal effect results showed that MCHP exhibited a power and concentration-dependent photothermal conversion capacity and a good photothermal stability. The doxorubicin (DOX) release from the MCHP/DOX system exhibited NIR/pH/reduction-responsive release properties. A cytotoxicity assay demonstrated that, under NIR irradiation, the MCHP/DOX exhibited chemo-photothermal synergistic effects with a combination index (CI) of 0.643. The biodistribution of DOX in vivo indicated that an NIR laser can prolong the retardation time of DOX in tumor sites. In vivo antitumor experiments showed that MCHP/DOX with NIR irradiation had the highest tumor inhibition rate against 4T1 tumors in mice. This work suggested that MCHP could be explored as a multi-responsive drug release platform for combinational photothermo-chemotherapy., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work, a tumor-targeted and multi-stimuli responsive drug delivery system combining infrared thermal imaging of cells with thermo-chemotherapy was developed. Oxidized mesoporous carbon nanoparticles (MCNs-COOH) with high photothermal conversion ability (photothermal transduction efficiency η = 27.4%) in near-infrared (NIR) region were utilized to encapsulate doxorubicin (DOX). The outer surfaces of MCNs-COOH were capped with multifunctional carbon dots (CD HA ) as simultaneous smart gatekeepers, a tumor targeting moiety and a fluorescent probe. NIR laser irradiation killed cancer cells through NIR-light induced hyperthermia, facilitated chemotherapeutic drug release and enhanced the sensitivity of tumor cells to drugs. The therapeutic efficacy in two-dimensional (2D) and three-dimensional (3D) cells demonstrated that MC-CD HA loading DOX (MC-CD HA /DOX) had good chemo-photothermal synergistic antitumor effects (combination index of CI = 0.448). The biodistribution and pharmacodynamics experiments of MC-CD HA /DOX in the 4T1 tumor model indicated that MCNs-COOH prolonged the residence time of DOX in tumor tissues and therefore actualized effective synergistic photothermal chemotherapy. By combining these excellent capabilities, the tumor-targeted and multi-stimuli responsive drug delivery system can be utilized as a visible nanoplatform for chemophotothermal synergistic therapy., (Copyright © 2019 Elsevier Inc. All rights reserved.)

In this manuscript, the effect of the particle size of polymer-functionalized mesoporous carbon (MPP) nanoparticles on enhancing oral absorption of a water-insoluble drug is first investigated. The insoluble drug, fenofibrate (Fen), was selected as the model drug loaded in the MPP nanoparticles. MPP nanoparticles with different particle sizes were designed for improving the oral bioavailability of drugs, in which the branched polyethyleneimine (PEI) and polyacrylic acid (PAA) were modified on the surfaces of mesoporous carbon nanoparticles (MCNs) with amide bonds. In addition, PEI-functionalized carbon quantum dots (PCA) and radioisotope 125 I were applied to label the MPP nanoparticles to trace in the vivo process. According to the data, the MPP nanoparticles could markedly improve the dissolution rate and oral bioavailability of Fen. Interestingly, the MPP nanoparticle size had a notable effect on Fen oral absorption, and intermediate sized MPP nanoparticles were expected to be more ideal oral drug carriers. The nanoparticles were safe and easily excreted. These findings present the prospect of MPP nanoparticles for oral application, and guides the rational design of an oral delivery system with respect to particle size., (Copyright © 2017 Elsevier Inc. All rights reserved.)

A distinctive and personalized nanocarrier is described here for controlled and targeted antitumor drug delivery and real-time bioimaging by combining a redox/enzyme dual-responsive disulfide-conjugated carbon dot with mesoporous silica nanoparticles (MSN-SS-CD HA ). The carbon dot with controlling and targeting abilities was prepared through a polymerizing reaction by applying citric acid and HA as starting materials (named CD HA ). The as-prepared MSN-SS-CD HA exhibited not only superior photostability and excellent biocompatibility, but also the ability to target A549 cells with overexpression of CD44 receptors. Upon loading the antitumor drug, doxorubicin (DOX), into the mesoporous channels of MSN nanoparticles, CD HA with a diameter size of 3nm completely blocked the pore entrance of DOX-encapsulated MSN nanoparticles with a pore size of about 3nm, thus preventing the premature leakage of DOX and increasing the antitumor activity until being triggered by specific stimuli in the tumor environment. The results of the cell imaging and cytotoxicity studies demonstrated that the redox/enzyme dual-responsive DOX-encapsulated MSN-SS-CD HA nanoparticles can selectively deliver and control the release of DOX into tumor cells. Ex vivo fluorescence images showed a much stronger fluorescence of MSN-SS-CD HA -DOX in the tumor site than in normal tissues, greatly facilitating the accumulation of DOX in the target tissue. However, its counterpart, MSN-SH-DOX exhibited no or much lower tumor cytotoxicity and drug accumulation in tumor tissue. In addition, MSN-SS-CD was also used as a control to investigate the ability of MSN-SS-CD HA to target A549 cells. The results obtained indicated that MSN-SS-CD HA possessed a higher cellular uptake through the CD44 receptor-mediated endocytosis compared with MSN-SS-CD in the A549 cells. Such specific redox/enzyme dual-responsive targeted nanocarriers are a useful strategy achieving selective controlled and targeted delivery of therapeutic reagents with real-time bioimaging, and may also facilitate the development of drug delivery systems for a number of clinical applications., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this study, hollow mesoporous carbon nanoparticles (HMCN) and mesoporous carbon nanoparticles (MCN) were used as near-infrared region (NIR) nanomaterials and drug nanocarriers were prepared using different methods. A comparison between HMCN and MCN was performed with regard to the NIR-induced photothermal effect and drug loading efficiency. The results of NIR-induced photothermal effect test demonstrated that HMCN-COOH had a better photothermal conversion efficacy than MCN-COOH. Given the prominent photothermal effect of HMCN-COOH in vitro, the chemotherapeutic drug DOX was chosen as a model drug to further evaluate the drug loading efficiencies and NIR-triggered drug release behaviors of the nanocarriers. The drug loading efficiency of DOX/HMCN-COOH was found to be up to 76.9%, which was higher than that of DOX/MCN-COOH. In addition, the use of an 808nm NIR laser markedly increased the release of DOX from both carbon carriers in pH 5.0 PBS and pH 7.4 PBS. Cellular photothermal tests involving A549 cells demonstrated that HMCN-COOH had a much higher photothermal efficacy than MCN-COOH. Cell viability experiments and flow cytometry were performed to evaluate the therapeutic effect of DOX/HMCN-COOH and the results obtained demonstrated that DOX/HMCN-COOH had a synergistic therapeutic effect in cancer treatment involving a combination of chemotherapy and photothermal therapy., (Copyright © 2017 Elsevier Inc. All rights reserved.)

In this study, we synthesized a kind of hollow mesoporous carbon (HMC) as near-infrared (NIR) nanomaterial and made a comparison between HMC and IR-820 commercially available in terms of heat generation properties and thermal stability exposed under NIR laser irradiation. The NIR-induced photothermal tests indicated that HMC had excellent heat generating capacity and remained stable after exposed to NIR laser irradiation for several times. On the contrary, the IR-820 was thermal unstable and degraded completely after exposed to NIR laser irradiation for only one time. The anticancer drug DOX was chosen as a model drug to evaluate the loading capacity and release properties of carboxylated HMC (HMC-COOH). The drug loading efficiency of HMC-COOH could reach to 39.7%. In vitro release results indicated that the release rate of DOX was markedly increased under NIR laser irradiation both in pH5.0 and pH7.4 PBS. Cell viability experiments indicated that HMC-COOH/DOX has a synergistic therapeutic effect by combination of chemotherapy and photothermal therapy. This present research demonstrated that HMC could be employed as NIR-adsorbing agents as well as drug carriers to load lots of drug, realizing the synergistic treatment of chemotherapy and photothermal therapy., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Recent development of nano-technology provides highly efficient and versatile treatment methods to achieve better therapeutic efficacy and lower side effects of malignant cancer. The exploration of drug delivery systems (DDSs) based on nano-material shows great promise in translating nano-technology to clinical use to benefit patients. As an emerging inorganic nanomaterial, mesoporous carbon nanomaterials (MCNs) possess both the mesoporous structure and the carbonaceous composition, endowing them with superior nature compared with mesoporous silica nanomaterials and other carbon-based materials, such as carbon nanotube, graphene and fullerene. In this review, we highlighted the cutting-edge progress of carbon nanomaterials as drug delivery systems (DDSs), including immediate/sustained drug delivery systems and controlled/targeted drug delivery systems. In addition, several representative biomedical applications of mesoporous carbon such as (1) photo-chemo synergistic therapy; (2) delivery of therapeutic biomolecule and (3) in vivo bioimaging are discussed and integrated. Finally, potential challenges and outlook for future development of mesoporous carbon in biomedical fields have been discussed in detail.

In this paper, a smart nanocarrier (MSNs-SS-CDPAA) is developed for redox-responsive controlled drug delivery and in vivo bioimaging by grafting fluorescent carbon dots to the surface of mesoporous silica nanoparticles (MSNs) via disulfide bonds. The polyanion polymer poly(acrylic acid) (PAA) was used to prepare the carboxyl-abundant carbon dots (CDPAA) by hydrothermal polymerization. The negatively charged CDPAA were anchored to the openings of MSNs containing the disulfide bonds through amidation and were used as gatekeepers for trapping the drugs within the pores. The in vitro release results indicated that the prepared MSNs-SS-CDPAA/DOX showed highly redox-responsive drug release in pH 7.4 and pH 5.0 PBS. In addition, the redox-responsive release mechanism was studied by measurement of the Zeta potential and fluorescence spectrophotometry. The prepared MSNs-SS-CDPAA exhibited excellent biocompatibility and fluorescence properties. Confocal laser scanning microscopy (CLSM) showed that MSNs-SS-CDPAA could emit blue, green and red fluorescence at an excitation wavelength of 408, 488 and 561nm, respectively. In addition, MSNs-SS-CDPAA/DOX exhibited a high cellular uptake as shown by CDPAA imaging and a therapeutic effect on cancer cells by MTT assay. This study describes a novel strategy for simultaneously controlled drug delivery and real-time imaging to track the behavior of nanoparticles during tumor therapy., (Copyright © 2016 Elsevier Inc. All rights reserved.)

A structurally controllable fluorescence-labeled hollow mesoporous carbon (HMC) was simply prepared to improve the oral bioavailability of insoluble drugs and further trace their delivery process in vivo. The hollow structure was derived from an inverse replica process using mesoporous silica as a template and the fluorescent label was prepared by doping the carboxylated HMC with a confinement of Eu(3+)/Gd(3+)-EDTA. The physicochemical properties of the composites were systematically characterized by transmission electron microscopy, Fourier transform infrared spectroscopy and photoluminescence spectra tests prior to studying their effects on drug-release behavior and biodistribution. As a result, the thickness of the carrier's shell was adjusted from 70 nm to 130 nm and the maximum drug loading was up to 73.6%. The model drug carvedilol (CAR) showed sustained release behavior compared to CAR commercial capsules, and the dissolution rate slowed down as the shells got thicker. AUC0-48h and Tmax were enlarged 2.2 and 6.5 fold, respectively, which demonstrated that oral bioavailability was successfully improved. Bioimaging tests showed that the novel carbon vehicle had a long residence time in the gastrointestinal tract. In short, the newly designed HMC is a promising drug carrier for both oral bioavailability improvement and in vivo tracing.

Uniform mesoporous carbon spheres (UMCS) were used as a carrier to improve the bioavailability of the model drug, celecoxib (CEL). Furthermore, we investigated the mechanism responsible for the improved bioavailability of CEL. The association, adhesion and uptake of UMCS by intestinal epithelial cells were studied by transmission electron microscopy (TEM), fluorescence-activated cell sorting (FACS) and laser confocal scanning microscopy (LCSM). UMCS was found to promote cellular uptake of CEL. Drug transport in Caco-2 cell monolayers proved that UMCS can significantly reduce the rate of drug efflux and improve CEL permeability. The dissolution rate of CEL from drug-loaded samples was markedly improved compared with pure crystalline CEL; moreover, oral bioavailability of CEL loaded into UMCS was also markedly improved compared with that of commercially available capsules. UMCS indicates the advantages and potential of this method to achieve improved oral absorption by increasing the dissolution rate, cellular uptake and permeability of the drug.

3-D ordered macroporous carbon with different polymer coatings were developed as new oral vaccine immunological systems. Poly dimethyl diallyl ammonium (PDDA), polyethyleneimine (PEI) and chitosan (CTS), three different polymers with electropositive or adsorption-promoting properties, were chosen as the coating materials to endow the vaccine delivery systems with different surface properties. The bovine serum albumin (BSA) was used as a model vaccine. The three different polymer coated systems exhibited similar release rate which minimized the influence of release rate. The measured value of immunoglobulin G (IgG) titers suggested that the sustained release rate of BSA from polymer coated systems exhibited no strengthened effect on the immune response but could delay the appearance of the peak of the IgG titers compared with uncoated system. The electrostatic attraction between the mucosal and positively charged carrier would be useful during the whole immune experiment. In addition, using the coating material with the ability of enhancing mucosal adsorption was important in the mid-late period of immune. The immunoglobulin A (IgA) titers induced by the polymer coated systems were significantly higher than that induced by the oral BSA solution or i.m. BSA with Freund's complete adjuvant (FCA) which suggested the successful mucosal immune response of the three different coated systems. Overall, this work provides valuable information for the development of oral vaccine delivery system., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this work, a simple and accurate geometric pore-adsorption model was established and experimentally validated for predicting the drug loading capacity in mesoporous carbon. The model was designed according to the shape of pore channels of mesoporous carbon and the arrangement of drug molecules loaded in the pores. Three different small molecule drugs (celecoxib, fenofibrate and carvedilol) were respectively loaded in mesoporous carbon with different pore sizes. In order to test the accuracy of the established model, nitrogen adsorption-desorption analysis was employed to confirm the pore structure of mesoporous carbon and to calculate the occupation volume of the adsorbed drugs. The adsorption isotherms of celecoxib were systematically investigated to describe the adsorption process. It was found that the experimental results of adsorption capacity were all in the range of the predicted values for all the tested drugs and mesoporous carbon. The occupation volumes calculated from the model also agreed well with the experimental data. These results demonstrated that the established model could accurately provide the range of drug loading capacity, which may provide a useful option for the prediction of the drug loading capacity of small molecule drugs in mesoporous materials., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Polymer-functionalized carbon nanoparticles hold great promise for their use in enhancing the oral absorption of drugs with poor oral bioavailability. And since the abundant expression of folate receptors in intestinal tract, folic acid (FA) modified uniform mesoporous carbon spheres (UMCS) was used to improve oral absorption of paclitaxel, a chemotherapeutic drug with poor oral bioavailability. In this research, folate-polyethyleneimine (FA-PEI) was grafted onto acid-treated uniform mesoporous carbon spheres through one-step electrostatic attraction. PTX was loaded into mesopores of nanoparticles through solvent evaporation, present as amorphous. The release of PTX from the FA-PEI-UMCS nanoparticles exhibited an initial rapid release, followed by a sustained release. And release rate could be regulated by changing amount of FA-PEI complex on the UMCS. The uptake of PTX-encapsulated nanoparticles was studied exploiting Caco-2 cells as an in vitro model. The results of confocal microscopy and flow cytometry demonstrated that folate functionalization enhanced internalization of nanoparticles by the cells. Moreover, PTX loaded in FA-PEI-UMCS nanoparticles resulted in a 5.37-fold increase in apparent permeability (Papp) across Caco-2 cell monolayers compared to Taxol(®). And the in vivo results showed that FA-PEI-UMCS nanoparticles did not only improve the oral bioavailability of PTX, but also decrease the gastrointestinal toxicity of PTX. In conclusion, the FA-PEI-UMCS nanoparticles might be a potentially applicable system to improve oral absorption of drugs with poor oral bioavailability., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The purposes of this investigation are to design mesoporous carbon (MC) with spherical pore channels and incorporate CEL to it for changing its needlelike crystal form and improving its dissolution and bioavailability. A series of solid-state characterization methods, such as SEM, TEM, DSC and XRD, were employed to systematically investigate the existing status of celecoxib (CEL) within the pore channels of MC. The pore size, pore volume and surface area of samples were characterized by nitrogen physical absorption. Gastric mucosa irritation test was carried out to evaluate the safety of mesoporous carbon as a drug carrier. Dissolution tests and in vivo pharmacokinetic studies were conducted to confirm the improvement in drug dissolution kinetics and oral bioavailability. Uptake experiments were conducted to investigate the mechanism of the improved oral bioavailability. The results of solid state characterization showed that MC was prepared successfully and CEL was incorporated into the mesoporous channels of the MC. The crystallinity of CEL in MC was affected by different loading methods, which involve evaporation method and melting method. The dissolution rate of CEL from MC was found to be significantly higher than that of pure CEL, which attributed to reduced crystallinity of CEL. The gastric mucosa irritation test indicated that the MC caused no harm to the stomach and produced a protective effect on the gastric mucosa. Uptake experiments indicated that MC enhanced the amount of CEL absorbed by Caco-2 cells. Moreover, oral bioavailability of CEL loaded within the MC was approximately 1.59-fold greater than that of commercial CEL. In conclusion, MC was a safe carrier to load water insoluble drug by controlling the crystallinity or crystal form with improvement in drug dissolution kinetics and oral bioavailability., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Purpose: A novel mesocellular carbon foam (MSU-FC) with a large pore size and a three-dimensional porous structure for the oral delivery of poorly water-soluble drugs was prepared. The goal of this study was to improve in vitro dissolution and in vivo absorption of celecoxib (CEB), a model drug, by means of novel carbon-based nanoparticles prepared from the MSU-FC matrix., Methods: The MSU-FC matrix was synthesized by an inverse replica templating method using mesocellular silica template. A solvent immersion/evaporation method was used to load the drug molecules. The drug-loaded nanoparticles were characterized for morphology, surface area, particle size, mesoporous structure, crystallinity, solubility and dissolution. The effect of MSU-FC on cell viability was measured using the MTT conversion assay. Furthermore, the oral bioavailability of CEB-loaded MSU-FC in fasted rats was compared with that of the marketed product., Results: Our results demonstrate that CEB incorporation into the prepared MSU-FC resulted in an approximately 9-fold increase in aqueous solubility in comparison with crystalline CEB. MSU-FC produced accelerated immediate release of CEB in comparison with crystalline CEB (pure CEB powder or marketed formulation) and the drug-loaded conventional mesoporous carbon particles. The relative bioavailability of CEB for CEB-loaded MSU-FC was 172%. In addition, MSU-FC nanoparticles exhibited very low toxicity., Conclusions: The MSU-FC nanomatrix has been shown to be a promising drug delivery vehicle for improving the dissolution and biopharmaceutical characteristics of poorly water-soluble drugs.

A new oral sustained drug delivery system (DDS) involving a combination of inorganic mesoporous material (CMK-5) and organic polymer poly dimethyl diallyl ammonium (PDDA) was established to determine its general suitability for use with poorly water soluble drugs. Nimodipine, carvedilol and fenofibrate, three different drugs with acidic or alkaline properties, were selected as model drugs and loaded into carriers. The physicochemical properties of the drug carriers were systematically studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen adsorption. The structural body changes of the composites in release medium, with or without additional salts, were also studied using particle sizing systems, nitrogen adsorption and zeta potential measurement in order to investigate the sustained release mechanism of the drugs. The results obtained showed that sustained release of drug from the designed DDS was mainly due to the blockage effect arising from the strong swelling of the coated polymers when in contact with release medium. Additional salts, when they reached a certain level, allowed a dramatic burst release. We believe that our designed sustained DDS provide a new option for water insoluble drugs and can be considered as fundamental for those more sophisticated DDS increasingly required in modern medical treatments., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The purpose of this study was to develop mesoporous carbon loaded with a poorly watersoluble drug to enhance the drug dissolution and improve the oral bioavailability. Mesoporous carbon was synthesized using Pluronic 127 triblock polymer (F127), TEOS and phenolic resins. Fenofibrate (FFB) was chosen as a model drug and loaded onto mesoporous carbon using three different loading methods involving incipient wetness impregnation, and the solvent and melting methods. The effect of the physical state and the specific surface area were investigated using nitrogen adsorption, transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). It was found that the physicochemical properties of the drug as well as the drug loading methods had critical effects on the drug release rate. In vitro drug release studies showed that incorporation of FFB in mesoporous carbon greatly enhanced the dissolution rate in comparison with that of the pure crystalline drug. Moreover, the oral bioavailability of the drug from mesoporous carbon was higher than that of FFB commercial capsules. Furthermore, mesoporous carbon produced no irritation of the mucosa of the gastrointestinal tract as shown by gastric mucosa irritation test., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Fibrous ordered mesoporous carbon (FOMC) was developed as a new drug delivery system for loading an insoluble drug, designed to be orally administered, and then to enhance the drug loading capacity, improve the dissolution rate, enhance the oral bioavailability and reduce the gastric damage. Celecoxib (CEL) was chosen as a model drug. The nanostructures and effect of different pore sizes (4.4-7.0 nm) on drug loading and release properties were studied. The results showed that FOMC has a high drug loading capacity (0.599 g/g, drug weight/carrier weight) and the dissolution rate of CEL from FOMC was much faster than pure crystalline CEL using buffer (pH 6.8) as a dissolution medium. Moreover, the oral bioavailability of CEL loaded into FOMC was significantly improved compared with that of CEL capsules and the gastric damage caused by CEL which was loaded in FOMC was also reduced, demonstrating the protective effect of FOMC., (Copyright © 2012 Elsevier B.V. All rights reserved.)

In this study, uniform mesoporous carbon spheres (UMCS) with 3-D pore system and fibrous ordered mesoporous carbon (FOMC) with 2-dimensional hexagonal mesoporous structure were studied as drug carriers for oral drug delivery system. Lovastatin (LOV), which has low water solubility, was chosen as a model drug. Drug release rate and degree of drug loading of UMCS and FOMC were compared. The effects of different pore channel structures and pore sizes on LOV uptake and release were systematically investigated. Cytotoxicity of UMCS and FOMC on human colon carcinoma (Caco-2) cells were also studied. The results indicate that UMCS has a higher degree of drug loading (up to 36.26% drug weight/total weight) compared with FOMC. The dissolution rate of LOV from UMCS was found to be markedly increased compared with pure crystalline LOV, and the dissolution rate of LOV from FOMC was relatively sustained compared with UMCS, and both UMCS and FOMC exhibited a weak cytotoxicity at tested concentrations (10-800 μg/ml)., (Copyright © 2011 Elsevier B.V. All rights reserved.)

• Preparation and long-wavelength regulation of CDs are introduced. • The important physicochemical properties of CDs are illustrated and highlighted. • This review summarizes biomedical applications of CDs-based nanoplatforms. • CDs-based nanoplatforms are innovatively classified and summarized. • The key issues and challenges of CDs in biomedical applications are discussed. Carbon dots (CDs) are a new type of fluorescent carbon nanomaterials with highly carbonized cores and surface groups. The outstanding properties of CDs, such as excellent fluorescence properties, ultrasmall size, abundant functional groups, and high biocompatibility, make CDs-based nanoplatforms widely used in biomedical fields. A summary of the properties of CDs can increase the understanding and facilitate the applications of CDs-based nanoplatforms. Based on this, the vital physicochemical properties of CDs are innovatively summarized in this review, including fluorescence, ultrasmall size, tumor targeting, light absorption, hydrophilicity/hydrophobicity, and catalytic capacity. To further broaden the biomedical applications of CDs, various CDs-based nanoplatforms are summarized and the CDs complexes are creatively classified in terms of "host/guest" molecules. At the same time, synthesis, improvements, and recent advances in CDs such as bioimaging, tumor theranostics, biomacromolecules delivery, biosensing, antioxidation, and antibiosis are also discussed in detail. The challenges in further understanding and applying CDs are rationally discussed. [ABSTRACT FROM AUTHOR]

• PTT-related theranostics and multimodal synergistic therapy based on MCNs. • Characteristics of MCNs in preparation and applications are introduced. • Research hotspots including MCNs-based nanoenzyme, degradable composite. • Strategies for enhanced PTT and potential opportunities are summarized. Mesoporous carbon nanoparticles (MCNs) and their derivatives have been extensively explored in photothermal therapy (PTT) based cancer treatment, due to their unique structure and excellent photothermal conversion efficiency. The tailored mesoporous framework with adjustable channel and smart surface modifications have proven to be effective in delivering various active agents and improving limitations with monotherapy, including severe side effects and poor therapeutic outcomes. Recently, multi-functional MCNs-composites with various enzyme-like activities and degradable framework are attracting increasing attention in PTT-based multimodal therapies thanks to the advances in nanocasting and structure design. In view of the rapid development of MCNs-based PTT therapies, this review summarizes the current progress, including (1) Characteristics of MCNs used in PTT; (2) PTT combined treatments; (3) Multi-functional MCNs in PTT; (4) Multiple ways to achieve low-power efficient PTT. In addition, the properties of MCNs, including biodegradability, higher attainable catalysis activities, and limited light penetration in PTT are fully discussed regarding challenges of potential clinical translation. [ABSTRACT FROM AUTHOR]

Thermo-chemotherapy could improve the therapeutic effects of single chemotherapy with the help of cytotoxic heat produced by the PTT (photothermal therapy). The photothermal conversion property of material needs to be preferentially considered in the design the drug delivery in the thermo-chemotherapy. Therefore, in this work, mesoporous carbon nanoparticles (MCN) with excellent heat generating efficiency and high surface area was designed. And the NIR absorbing dye cypate was conjugated on the surface of MCN by the cleavable disulfide bonds to hinder the premature release of doxorubicin (DOX) and enhance the photothermal properties of MCN-based delivery systems. And then TPGS was further covered on the surface of MCN by hydrophobic force to prolong circulation time and improve the biocompatibility and dispersion stability of MCN-CyT in physiological environment. The release of DOX accelerated obviously in the presence of glutathione (GSH), acidic condition and NIR irradiation, indicating that DOX/MCN-CyT exhibited redox/pH/NIR triple-triggered drug release. The anti-tumor experiment indicated that DOX/MCN-CyT showed a synergistic thermo-chemotherapy effect for cancer. Thus, the present research provides huge potential in multi-triggered drug delivery and thermochemotherapy for combination therapy. [ABSTRACT FROM AUTHOR]

Recent years, photothermal therapy (PTT) as a noninvasive cancer treatment has attracted wide interests of researchers worldwide. Platforms which can transform near infrared (NIR) laser power into heat play vital roles in PTT. In this paper, mesoporous carbon nanospheres (MCN) and graphene oxide nanosheets (GO), two widely used platforms in cancer treatment were compared in photothermal effect induced by NIR as well as the drug loading and release behaviors of the model drug doxorubicin (DOX). MCN and GO were grafted with polyethylene glycol (PEG) to improve the biocompatibility and aqueous stability. The elevated temperature of MCN-PEG was obviously superior to GO-PEG both in vitro and cellular photothermal effect. MCN-PEG and GO-PEG showed photothermal stability under repeated NIR irradiation. Additionally, the photothermal conversion efficiency (η) of MCN-PEG was calculated to be 32.24 %, which was higher than that of GO-PEG (27.13 %). Both nanovehicles had the similar drug loading capacities, however, the accumulative release rate of DOX/MCN-PEG was 1.6 times higher than DOX/GO-PEG in the pH 5.0 phosphate buffer solutions (PBS) exposed to NIR laser. Moreover, the cell viability assays and cellular uptake experiments validated that DOX/MCN-PEG possessed more excellent synergetic effect in chemo-photothermal therapy with the combination index (CI) of 0.443 compared with DOX/GO-PEG (0.661). [ABSTRACT FROM AUTHOR]