Search

Advanced oxidation processes (AOP) are a common tool to remove organic compounds from the water cycle. The process is mostly relied on free radicals (i.e., SO 4 • - and HO•) with high oxidation power in solution. Surface-mediated mechanism could improve this process to prevent undesired quenching of aqueous radicals that widely exists in free radical pathways and alleviate metal leaching through direct electron transfer. In this work, a facile low-temperature pre-treatment combined with pyrolytic strategy was employed to construct a green catalyst with iron oxides embedded in Kraft-lignin derived bio-char (γ-Fe 2 O 3 @KC), upon which radicals stay surface mediated and the activity-stability trade-off is achieved for pollutant degradation. The γ-Fe 2 O 3 @KC is capable of activating PMS to generate non-radical species which are more stable ( 1 O 2 and Fe(V)=O) and of enhancing electron transfer efficiency. A surface-bound reactive complex (Catalyst-PMS*) was identified by electrochemical characterization and was discussed with primary surface-bound radical pairs to explain the contradictions between quenching and EPR detection results. We analyzed the γ-Fe 2 O 3 @KC as a PMS-activating catalyst for a wider range of oxidation targets, such as Rhodamine B (∼100%), p-nitrophenol (∼85%), and Ciprofloxacin (∼63%), and found competitive removal efficiencies. The system also shows an encouraging reusability for at least 5 times and high stability at pH 3-9, and the low concentration of iron in γ-Fe 2 O 3 @KC/PMS system implies the carbon scaffold of biochar alleviate the leakage process. The combined findings highlight the applicability in 'green (source) to green (application)' processes using cost-effective and bio-friendly iron@carbon catalysts, where alternative oxidation pathways are activated to play a dominant role for water purification., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Carbon nanomaterials doped with some other lightweight elements were recently described as powerful, heterogeneous, metal-free organocatalysts, adding to their high performance in electrocatalysis. Here, recent observations in traditional catalysis are reviewed, and the underlying reaction mechanisms of the catalyzed organic transformations are explored. In some cases, these are due to specific active functional sites, but more generally the catalytic activity relates to collective properties of the conjugated nanocarbon frameworks and the electron transfer from and to the catalytic centers and substrates. It is shown that the learnings are tightly related to those of electrocatalysis; i.e., the search for better electrocatalysts also improves chemocatalysis, and vice versa. Carbon-carbon heterojunction effects and some perspectives on future possibilities are discussed at the end., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Microporous carbons are an interesting material for electrochemical applications. In this study, we evaluate several such carbons without/with N or S doping with regard to capacitive deionization. For this purpose, we extent the salt-templating synthesis towards biomass precursors and S-doped microporous carbons. The sample with the largest specific surface area (2830 m(2)  g(-1) ) showed 1.0 wt % N and exhibited a high salt-sorption capacity of 15.0 mg g(-1) at 1.2 V in 5 mM aqueous NaCl. While being a promising material from an equilibrium performance point of view, our study also gives first insights to practical limitations of heteroatom-doped carbon materials. We show that high heteroatom content may be associated with a low charge efficiency. The latter is a key parameter for capacitive deionization and is defined as the ratio between the amounts of removed salt molecules and electrical charge., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key reactions in lithium-oxygen batteries (LOBs) being a promising candidate to store renewable energies due to their high specific energy. However current development on LOBs is suffering from unsuitable catalysts. In particular, carbon-based catalysts were found to perform poorly in this system. Here, we show that metal-free mesoporous nitrogen-doped carbons (meso-NdCs) offer highly promising performances in both ORR and OER; they act as bifunctional catalysts, and can be synthesized by a very simple method. The efficient electrocatalytic activity of ORR and OER was used in a LOB cell during discharge and charge, respectively, and the present system showed a lower overpotential comparable to metal-based catalysts in LOB system. Thus, we demonstrate that meso-NdCs act as a new and affordable candidate for the efficient bifunctional oxygen catalysis, therefore can be applied to many energy-related applications., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The superior physical properties of carbon nanotubes (CNTs) have led to their broad application. Intrinsically, CNTs tend to agglomerate from hydrophobic interactions, which is highly undesirable for solution processing and device fabrication. Commonly, a stabilizer consisting of organic surfactants or polymers is used to disperse CNTs. Recently, we synthesized nitrogen-doped carbon hollow nanospheres (25-90 nm), termed carbon "nanobubbles". They bear superior dispersability in water and distinctive graphitic order. Herein, we describe the nanobubble-assisted dispersion of CNTs in aqueous solution upon sonication. This process relies on the π-π interaction between the two aromatic carbon nanostructures, which can process their carbon mixture in water into conductive filter membranes, ink, and discs. This stabilization can be extended to other aromatic carbons. In addition, the π-π interaction may create a new type of carbon p-n junction that can be used to improve charge separation., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Layer-by-layer (LbL) assembly technique is applied for the first time for the preparation of nitrogen-doped carbon capsules. This approach uses colloid silica as template and two polymeric deposition components, that is, poly(ammonium acrylate) and a poly (ionic liquid) poly(3-cyanomethyl-1-vinylimidazolium bromide), which acts as both the carbon precursor and nitrogen source. Nitrogen-doped carbon capsules are prepared successfully by polymer wrapping, subsequent carbonization and template removal. The as-synthesized carbon capsules contain ≈7 wt% of nitrogen and have a structured specific surface area of 423 m(2) g(-1). Their application as supercapacitor has been briefly introduced. This work proves that LbL assembly methodology is available for preparing carbon structures of complex morphology., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mesoporous nitrogen-doped carbon derived from the ionic liquid N-butyl-3-methylpyridinium dicyanamide is a highly active, cheap, and selective metal-free catalyst for the electrochemical synthesis of hydrogen peroxide that has the potential for use in a safe, sustainable, and cheap flow-reactor-based method for H(2)O(2) production., (© 2012 American Chemical Society)

Modification of graphitic carbon nitride (g-C(3)N(4)) photocatalyst with transition metals was achieved with a simple soft-chemical approach using dicyandiamide monomer and metal chloride as precursors, in combination with a thermal-induced polycondensation at 600 °C under nitrogen atmosphere. The resultant organic-inorganic hybrid materials were thoroughly characterized by a variety of techniques, including X-ray diffraction (XRD), UV/Vis spectroscopy, X-ray photoelectron spectroscopy (XPS), N(2)-sorption, transmission electron microscopy (TEM), photoluminescence (PL), and FTIR. Benzene hydroxylation and styrene epoxidation reactions were employed to evaluate the catalytic/photocatalytic activity of the synthesized g-C(3)N(4)-based catalysts. Results showed that Fe- and Cu-modified g-C(3)N(4) were active for the hydroxylation of benzene to phenol using H(2)O(2) under mild conditions. It was also found that g-C(3)N(4) could promote the catalytic epoxidation of styrene using molecular oxygen as the primary oxidant; after modification with Co and Fe, the catalytic performance for styrene epoxidation with O(2) could be significantly improved, especially when coupled with visible-light irradiation., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mesoporous nitrogen-doped carbon materials with high surface areas up to 1500 m(2) g(-1) were conveniently made by the carbonization of nucleobases dissolved in an all-organic ionic liquid (1-ethyl-3-methylimidazolium dicyanamide). Using hard templating with silica nanoparticles, this process yields high-surface-area nitrogen-doped carbon materials with nitrogen contents as high as 12 wt %, narrow mesopore size distribution of ca. 12 nm diameter, and local graphitic carbon structure. It is demonstrated that the resulting nitrogen-doped carbons show very high catalytic activity, even in the metal-free case in the oxygen reduction reaction (ORR) for fuel cells. Specifically, the as-prepared materials exhibit a low onset voltage for ORR in alkaline medium and a high methanol tolerance, compared with those of commercial 20 wt % Pt/C catalyst. We regard this as a first step toward an all-sustainable fuel cell, avoiding noble metals.

The synthesis of carbonaceous materials with a high surface density of amino functions for CO(2) sorption and sequestration is reported. The amino-rich carbonaceous materials are characterized by elemental analysis, N(2) sorption, scanning and transmission electron microscopy, zeta potential, TGA and FTIR measurements. A detailed discussion on the use of these materials in CO(2) capture is provided. The materials show significant sorption capabilities for CO(2) (4.3 mmol g(-1)at -20 degrees C and 1 bar). Furthermore, they show a high apparent selectivity for CO(2) over N(2) at both low and high temperatures.

We present a simple and green one-step pathway towards nitrogen-doped carbon nanostructures with controlled mesoporosity through hydrothermal treatment of glucose in the presence of model proteins. Performing the reaction with different amounts of egg white ovalbumin protein (OvA), carbonaceous nanoparticles or continuous nanosponges with high specific surface areas can be efficiently produced. The nitrogen content of the structures is rather high (up to 8 wt%) and can be kept constant up to 950 degrees C, while oxygen elimination and graphitization of the carbon material occurs. We demonstrate here that sustainable natural resources can be efficiently used in the synthesis of pure high-potential nanomaterials.

Energy shortage, environmental crisis, and developing customer demands have driven people to find facile, low-cost, environmentally friendly, and nontoxic routes to produce novel functional materials that can be commercialized in the near future. Amongst various techniques, the hydrothermal carbonization (HTC) process of biomass (either of isolated carbohydrates or crude plants) is a promising candidate for the synthesis of novel carbon-based materials with a wide variety of potential applications. In this Review, we will discuss various synthetic routes towards such novel carbon-based materials or composites via the HTC process of biomass. Furthermore, factors that influence the carbonization process will be analyzed and the special chemical/physical properties of the final products will be discussed. Despite the lack of a clear mechanism, these novel carbonaceous materials have already shown promising applications in many fields such as carbon fixation, water purification, fuel cell catalysis, energy storage, CO(2) sequestration, bioimaging, drug delivery, and gas sensors. Some of the most promising examples will also be discussed here, demonstrating that the HTC process can rationally design a rich family of carbonaceous and hybrid functional carbon materials with important applications in a sustainable fashion.

To design more sustainable processes for the alkylation of ketones, the use of both atom-ineffective leaving groups such as halides and boron as well as noble-metal-based catalysts should be avoided. For that purpose, high-surface-area titanium nitride was prepared from high-surface-area titanium dioxide using cyanamide as a transcription agent. The resulting nitride as well as the initial oxide proved to be effective and versatile catalysts for the alkylation of ketones with alcohols. Interestingly, the TiN catalyst yields unsaturated compounds, while the oxide-based catalyst mainly yields saturated coupling products. As a result of its metallic properties, TiN shows a strong tendency to catalyse the dehydrogenation of alcohols, which then undergo aldol condensation with ketones. In contrast, TiO(2) promotes the direct nucleophilic attack of ketones on alcohols.

Cross-coupling reactions play a vital role in modern organic synthesis, enabling the construction of necessary C–C or C–(het)atom bonds for synthetic transformations. Although C(sp2)–C and C(sp2)–N cross-coupling reactions have received significant attention, recent advancements have also highlighted the significance of C(sp2)–S cross-coupling reactions. These reactions lead to the synthesis of valuable compounds, including pharmaceuticals and materials. In a recent report, we introduced Adaptive Dynamic Homogeneous Catalysis (AD-HoC) as an efficient method for C(sp2)–S cross-coupling reactions. This method operates without the need for any ligands, base, or additional additives, relying solely on essential parameters. In this report, we discuss the use of mesoporous graphitic carbon nitride (mpg-CN) as an all-organic heterogeneous photocatalyst in such transformations. The versatility and robustness of the reaction are showcased with fifty synthetic examples, achieving up to a 98% yield. The use of mpg-CN as a catalyst additionally enables the easy recovery of the photocatalyst from the reaction mixture and facilitates the sequential execution of multiple cross-coupling reactions with consistent yields of the desired products using a simple setup. This approach is a significant advancement in the field, both in terms of operational simplicity and environmental impact, traits that we all envision for sustainability. [ABSTRACT FROM AUTHOR]

Developing high‐performance carbonaceous anode materials for sodium‐ion batteries (SIBs) is still a grand quest for a more sustainable future of energy storage. Introducing sulfur within a carbon framework is one of the most promising attempts toward the development of highly efficient anode materials. Herein, a microporous sulfur‐rich carbon anode obtained from a liquid sulfur‐containing oligomer is introduced. The sodium storage mechanism shifts from surface‐controlled to diffusion‐controlled at higher synthesis temperatures. The different storage mechanisms and electrode performances are found to be independent of the bare electrode material's interplanar spacing. Therefore, these differences are attributed to an increased microporosity and a thiophene‐rich chemical environment. The combination of these properties enables extending the plateau region to higher potential and achieving reversible overpotential sodium storage. Moreover, in‐operando small‐angle X‐ray scattering (SAXS) reveals reversible electron density variations within the pore structure, in good agreement with the pore‐filling sodium storage mechanism occurring in hard carbons (HCs). Eventually, the depicted framework will enable the design of high‐performance anode materials for sodium‐ion batteries with competitive energy density. [ABSTRACT FROM AUTHOR]

Functionalized porous carbons are central to various important applications such as energy storage and conversion. Here, a simple synthetic route to prepare oxygen‐rich carbon nitrides (CNOs) decorated with stable Ni and Fe‐nanosites is demonstrated. The CNOs are prepared via a salt templating method using ribose and adenine as precursors and CaCl2·2H2O as a template. The formation of supramolecular eutectic complexes between CaCl2·2H2O and ribose at relatively low temperatures facilitates the formation of a homogeneous starting mixture, promotes the condensation of ribose through the dehydrating effect of CaCl2·2H2O to covalent frameworks, and finally generates homogeneous CNOs. As a specific of the recipe, the condensation of the precursors at higher temperatures and the removal of water promotes the recrystallization of CaCl2 (T < Tm = 772 °C), which then acts as a hard porogen. Due to salt catalysis, CNOs with oxygen and nitrogen contents as high as 12 and 20 wt%, respectively, can be obtained, while heteroatom content stayed about unchanged even at higher temperatures of synthesis, pointing to the extraordinarily high stability of the materials. After decorating Ni and Fe‐nanosites onto the CNOs, the materials exhibit high activity and stability for electrochemical oxygen evolution reaction with an overpotential of 351 mV. [ABSTRACT FROM AUTHOR]

Two series of novel carbon nitride photocatalysts, Rho‐CN ("rhodizonate‐doped carbon nitride") and Rho‐CN‐TC (Rho‐CN treated in potassium thiocyanate melt), are synthesized in a multistep fashion via copolymerization of cyanamide with potassium rhodizonate. The formed ionic carbon nitrides are composed of poly(triazine imide) (PTI/Li+Cl−) and potassium poly(heptazine imide) (K‐PHI) phases and provide a broad absorption range up to 800 nm. The photocatalysts are characterized by several techniques (including diffuse reflectance ultraviolet–visible, powder X‐ray diffraction, Fourier transform infrared, scanning electron microscopy, and electrochemical methods) and studied in a series of photocatalytic reactions, including red light‐promoted benzylamine oxidation, dual photoredox/nickel C–N cross‐coupling, and hydrogen peroxide evolution. The optimal ratio of rhodizonate dopant in its mixture with cyanamide is found to be 0.5 mol%. The performance of the newly synthesized materials is comparable to the activities of the benchmark catalysts K‐PHI and CN‐OA‐m (defective poly(heptazine imide) doped with oxamide), while not requiring more expensive nitrogen sources for preparation, like 5‐aminotetrazole, or multiple oven cycles. [ABSTRACT FROM AUTHOR]

The hydrogen evolution reaction (HER) is a complex reaction involving many interdependent physicochemical steps. Highly ordered carbon nitride‐based materials, such as Na‐PHI and K‐PHI, display some of the highest activities for H2 evolution among the carbon nitride‐based materials, due to their electronic properties, but also the presence of cyanimide terminations, which favors the charge transfer for the Pt cocatalyst nanoparticles (NPs). For such highly optimized semiconductor structures, the necessity to control and improve other steps of the photocatalytic process becomes essential, in particular the poor electron transfer from the Pt NPs to the protons in solution over the Helmholtz or Stern layer. Taking highly ordered Na‐PHI as a test material, the influence of water‐dissolved alkali cations on the HER is systematically studied and it is experimentally verified that the electron transfer from the Pt NPs to the protons in solution limits the efficiency of heterogeneous carbon nitride‐based catalysts. This paper explains how hydrated alkali cations influence electron transfer and are able to boost the H2 evolution rate of the same Na‐PHI from 2401 up to 5330 µmol h−1 g−1 with an apparent quantum yield of 13% at 420 nm. [ABSTRACT FROM AUTHOR]

We designed a metal‐free synthesis of carbon nanofiber based on ketene chemistry using phosphorus pentoxide (P2O5) and vegetable oil. Based on the characterization of intermediates, P2O5‐oil reaction yielded most possibly alkylketenes, which polymerized into poly(ketene) with abundant enol groups. The enol groups further reacted with P2O5, forcing the poly(ketene) to assemble into a nano‐sized preassembly structure. Moderate heating transforms these structures into carbonaceaus nanofibers. This approach is applicable to other chemicals with similar structure to vegetable oil. The carbon nanofibers with P‐O‐C functionalization show relatively high graphitization degree and promising textural properties. The C‐O‐P environment accounts for 66 at % of the total P and creates a superior thermal stability. As a model application, a CDI system built of a carbon‐nanofiber‐based electrode countered by an activated carbon‐based electrode exhibited exceptional performance. [ABSTRACT FROM AUTHOR]

Molecular photoredox complexes from the platinum group paved the way of organic photocatalysis. However, high price and difficulties related to removal and recycling hamper application of such complexes on the larger scale. Carbon nitride semiconductor photocatalysts are deprived at large extent of such limitations. Herein, we summarize application of ionic carbon nitrides in photocatalysis. A salt‐like structure of ionic carbon nitrides comprising negatively charged poly(heptazine imide) anion and positively charged alkali metal cations gives rise to a number of unique properties and high activity in photocatalysis. The performance of ionic carbon nitrides in H2 generation is up to 100 times higher compared with the covalent graphitic carbon nitrides. Eleven photocatalytic reactions mediated by ionic carbon nitrides and their long‐lived radicals are reviewed. Economy of using carbon nitride photocatalysts in comparison with the photoredox complexes from the platinum group has been analyzed. [ABSTRACT FROM AUTHOR]

A parametrization algorithm to determine chord-length distributions (CLD) from small-angle scattering data is used to characterize details of the pore structure, pore size, and morphology of porous carbon materials. This approach is applied to various carbon processing procedures, such as steam activation, tempering, and contacting with polymer binders. It is found that this CLD method reveals, compared to previous small angle x-ray scattering evaluation approaches, fine changes in the pore structure and morphology of porous carbons with higher accuracy and physical significance. © 2002 American Institute of Physics. [ABSTRACT FROM AUTHOR]

As a new type of heterogeneous catalyst with "homogeneous‐like" activity, single‐site transition‐metal materials are usually treated as integrated but separate active centers. A novel grouping effect is reported for single Ni−N4 sites in nitrogen‐doped carbon (Ni/NC), where an effective ligand‐stabilized polycondensation method endows Ni/NC nanocatalysts with a high content of single‐site Ni up to 9.5 wt %. The enhanced electron density at each single Ni−N4 site promotes a highly efficient hydrogen transfer, which is exemplified by the coupling of benzyl alcohol and aniline into N‐benzylaniline with a turnover frequency (TOF) value of 7.0 molN‐benzylaniline molmetal−1 h−1; this TOF outpaces that of reported stable non‐noble‐metal‐based catalysts by a factor of 2. Herd instinct: A grouping effect is observed for single Ni−N4 sites in a Ni catalyst supported by nitrogen‐doped carbon (NC). A high 9.5 wt % Ni content was achieved with a ligand‐stabilized polycondensation method. An enhanced electron density effect manifests at each single Ni−N4 site, which decreases the binding energy of H radicals to Ni and promotes efficient coupling of benzyl alcohol and aniline to form N‐benzylaniline. [ABSTRACT FROM AUTHOR]

Abstract: The targeted thermal condensation of a hexaazatriphenylene‐based precursor leads to porous and oxidation‐resistant (“noble”) carbons. Simple condensation of the pre‐aligned molecular precursor produces nitrogen‐rich carbons with C2N‐type stoichiometry. Despite the absence of any porogen and metal species involved in the synthesis, the specific surface areas of the molecular carbons reach up to 1000 m2 g−1 due to the significant microporosity of the materials. The content and type of nitrogen species is controllable by the carbonization temperature whilst porosity remains largely unaffected at the same time. The resulting noble carbons are distinguished by a highly polarizable micropore structure and have thus high adsorption affinity towards molecules such as H2O and CO2. This molecular precursor approach opens new possibilities for the synthesis of porous noble carbons under molecular control, providing access to the special physical properties of the C2N structure and extending the known spectrum of classical porous carbons. [ABSTRACT FROM AUTHOR]

CO2 capture is a pressing global environmental issue that drives scientists to develop creative strategies for tackling this challenge. The concept in this contribution is to produce site-specific nitrogen doping in microporous carbon fibers. Following this approach a carbon/carbon heterojunction is created by using a poly(ionic liquid) (PIL) as a 'soft' activation agent that deposits nitrogen species exclusively on the surface of commercial microporous carbon fibers. This type of carbon-based biphasic heterojunction amplifies the interaction between carbon fiber and CO2 molecule for unusually high CO2 uptake and resistive sensing. [ABSTRACT FROM AUTHOR]

Carbon nitrides with the increased surface areas (≈90 m2 g−1) were prepared by the heat-treatment of melamine-[Al(NO3)3]⋅9 H2O complexes. Here, [Al(NO3)3] ⋅9 H2O was successfully used as a 'green template' and a hydrogen-bonding partner of melamine, simultaneously providing a distinct porosity and defined particle morphology for the resulting carbon nitrides. The influence of the solvent and precursors ratio on the stoichiometry of the complexes, as well as the morphology, optical properties, and photocatalytic activity of resulting products for Rhodamine B degradation and sacrificial hydrogen evolution were investigated. We also studied the temperature-induced transformations of the starting complex to access the reaction mechanism. The developed synthesis procedure results in a significantly increased photocatalytic activity (up to 20-fold) compared with that of the ground reference material. [ABSTRACT FROM AUTHOR]

A facile and sustainable synthetic strategy based on the coordination of natural polyphenols with metal ions is developed for the textural engineering of mesocrystals and hierarchical carbon nanomaterials. The desired control of coordination between ellagic acid and zinc ions enables the macroscopic self-assembly behavior of crystalline nanoplatelets to be tailored into round and elongated "peanut"-like micron-sized mesostructured particles. Direct carbonization of these mesocrystals generates hierarchically porous carbon particles in good yields, possessing bimodal micro- and mesoporous architecture along with a well-preserved macroscopic structure. The pore system provides both small storage sites, demonstrated by high CO2 uptake, and transport channels also accessible by larger molecules. [ABSTRACT FROM AUTHOR]

Mesoporous graphitic carbon nitride (mpg-C3N4) has been developed as a non-metal, heterogeneous photocatalyst for the selective oxidation of sulfides to sulfoxides with O2 at room temperature. Especially, the combination of mpg-C3N4 and aldehydes was a highly active system under visible-light irradiation. For example, mpg-C3N4/isobutyraldehyde catalytic oxidation of methyl phenyl sulfide afforded 97% conversion with 98% selectivity for the methyl phenyl sulfoxide in 4 h. Moreover, the mpg-C3N4 can be easily recovered by filtration and then reused at least four times without losing activity. By exploring the electron spin resonance and some comparative experiments, a catalytic mechanism of this oxidation was provided. Finally, the system also works well in the oxidation of a number of sulfides, including sulfides bearing various groups, and phenyl disulfide. The use of a metal-free heterogeneous catalyst and visible light energy, along with the mild reaction conditions makes this oxidation reaction an environmentally benign and energy-saving chemical process. [ABSTRACT FROM AUTHOR]

The article reports on the synthesis of a mesoporous nitrogen doped carbon supported platinum catalyst based on an ionic liquid as nitrogen/carbon precursor and the evaluation of the catalytics system for oxygen reduction reaction (ORR). It analyzes the long-term behavior of this new catalyst and compared it with commercial high surface area carbon (HSAC) supported platinum catalyst. It also illustrates the synthesis route for mesoporous nitrogen doped carbon supported platinum catalyst.

In terms of broadening the potential application range of carbon based materials, heteroatom doping provides a useful tool to moderate their physical and chemical properties. While nitrogen doped carbons have been extensively researched, the reports for sulfur, and especially nitrogen/sulfur dual-doped materials is far less exhaustive. We present a one-pot synthesis of dual nitrogen/sulfur doped materials which is based on sustainable carbohydrate and amino acid precursors and enables tailoring of the final material's physicochemical properties. The addition of cysteine gives rise to pending sulfur functionalities, while addition of thienyl-cysteine results in structurally bound sulfur within the carbonaceous framework. Post pyrolysis offers an additional tool for controlling the material stability and results in microporosity as well as superior conductivity relative to undoped carbon microspheres from glucose. Nitrogen doping levels of about 4 wt% and sulfur doping levels of 3 wt% to 12 wt% could be achieved. The samples were, amongst other methods, characterized by XPS, 13C MAS solid state NMR and both N2 and CO2 sorption isotherms. Since this is the first report on heteroatom doped, sulfur containing carbon materials obtained via hydrothermal carbonization, we anticipate our work to be a starting point for more sophisticated studies concerning the role of sulfur (and nitrogen) on the physicochemical properties of hydrothermal carbon. [ABSTRACT FROM AUTHOR]

The hydrothermal synthesis of nitrogen-doped monolithic carbon aerogels derived from sustainable precursors (i.e.d-glucose and ovalbumin) is presented. The protein acts as nitrogen donor and surface stabilizing agent in this saccharide hydrothermal carbonization, to generate high surface area aerogels (>240 m2g−1) composed of functional continuous large diameter mesopores with excellent hierarchical transport architecture. Post-carbonization treatment controls surface chemistry (e.g.C or N condensation), facilitating tuneable physicochemical properties on a unique continuous 3D carbonaceous pore structure. This highly flexible synthesis lays the basis for the development of a new generation of sustainable (heteroatom-doped) porous carbon aerogels suitable for a range of high value applications. [ABSTRACT FROM AUTHOR]

The production of functional nanostructured materials starting from cheap natural precursors using environmentally friendly processes is a highly attractive subject in material chemistry today. Recently, much attention has been focused on the use of plant biomass to produce functional carbonaceous materials, encompassing economic, environmental and social issues. Besides the classical route to produce activated carbons from agricultural side products, the hydrothermal carbonization (HTC) process shows clear advantages in that it can generate a variety of cheap and sustainable carbonaceous materials with attractive nanostructure and functionalization patterns for a wide range of applications. In this tutorial reviewwe present the latest developments in this traditional but recently invigorated technique. It will be shown that HTC does not only access carbonaceous materials under comparatively mild hydrothermal conditions, but also replaces the more technical and structurally well-defined charring by a controlled chemical process. It will be shown that this makes it possible to tailor the final structure with the tools of colloid and polymer science, leading to very different morphologies with miscellaneous applications, including modern carbon nanocomposites and hybrids. [ABSTRACT FROM AUTHOR]

Abstract: The production of porous materials together with their associated applications using cheap precursors demonstrates the potential of a “chimie douce” based on carbohydrates and their hydrothermal decomposition products to replace same of the standard organic monomers, fulfilling the today''s requirements towards greener chemistry processes and the sustainability of the starting products. [Copyright &y& Elsevier]

Review: 82 refs. [ABSTRACT FROM AUTHOR]

Review: 99 refs. [ABSTRACT FROM AUTHOR]

Review: 110 refs. [ABSTRACT FROM AUTHOR]

Abstract: We describe the production and catalytic application of highly functionalized mesoporous carbonaceous materials, obtained via a one step green and cheap process relying on the hydrothermal carbonization of carbohydrates (e.g. glucose) in the presence of functional organic monomers (e.g. vinyl imidazole). The resulting materials could be further functionalized to feature imidazolium bromides on their surface and be used for various transesterification, Knoevenagel and Aldol reactions. [Copyright &y& Elsevier]

A new photocatalytic reaction process is described that cyano groups ( CN) are successfully grafted on carbon nitride (g-C 3 N 4 materials). The cyano group substitutes the previous surface terminating amino group ( NH 2 ) on g-C 3 N 4 by a radical reaction pathway, modifying the electron structure of the conjugated covalent system and engendering favorable properties for the visible-light driven photocatalysis. Cyanidated g-C 3 N 4 (g-C 3 N 4 -xCN) has a narrowed band gap of 2.29 eV, as compared to 2.73 eV for the pristine g-C 3 N 4 , showing expanded visible light absorbance to 590 nm. Moreover, the photo-induced charge-carrier separation is improved as well. In consequence, g-C 3 N 4 -xCN exhibits significantly enhanced performance in photocatalysis, here exemplifyed with the model coupling reaction towards alkenyl sulfones under green light (520 nm) irradiation. The methodology reported herein reveals the potential of the carbon nitride scaffold to be modified as such and illustrates the possiblities of the as-created novel carbon nitride materials grafted with various functional groups on their surface. [ABSTRACT FROM AUTHOR]

Heterogeneous catalysts of inexpensive and reusable transition-metal are attractive alternatives to homogeneous catalysts; the relatively low activity of transition-metal nanoparticles has become the main hurdle for their practical applications. Here, the de novo design of a Mott-Schottky-type heterogeneous catalyst is reported to boost the activity of a transition-metal nanocatalyst through electron transfer at the metal/nitrogen-doped carbon interface. The Mott-Schottky catalyst of nitrogen-rich carbon-coated cobalt nanoparticles (Co@NC) was prepared through direct polycondensation of simple organic molecules and inorganic metal salts in the presence of g-C3N4 powder. The Co@NC with controllable nitrogen content and thus tunable Fermi energy and catalytic activity exhibited a high turnover frequency (TOF) value (8.12 mol methyl benzoate mol-1 Co h-1) for the direct, base-free, aerobic oxidation of benzyl alcohols to methyl benzoate; this TOF is 30-fold higher than those of the state-of-the-art transition-metal-based nanocatalysts reported in the literature. The presented efficient Mott-Schottky catalyst can trigger the synthesis of a series of alkyl esters and even diesters in high yields. [ABSTRACT FROM AUTHOR]

Review: renaissance of graphitic carbon nitride (g-C3N4) as a highly active photo/electrocatalyst, and diverse applications of the metal-free polymer; 94 refs. [ABSTRACT FROM AUTHOR]

Herein we report a facile and scalable synthesis of highly nitrogen-doped porous carbon materials with tunable morphology. Bio-based imidazolium derivatives made from natural amino acids and dioxo-derivatives are employed as precursors, exhibiting an analogous behavior during carbonization to classical ionic liquids. Utilization of systematically controlled salt templating methods yields nitrogen-doped carbon materials with high surface areas of up to 2650 m 2 g −1 and morphology-engineered structures such as monolithic or highly extended, sheet-like carbons. We believe that the presented approach represents an alternative and sustainable platform towards the rational design of carbon materials possessing controlled nanoporosity and functionality. [ABSTRACT FROM AUTHOR]

Review: 201 refs. [ABSTRACT FROM AUTHOR]

Mesoporous nitrogen-doped carbon derived from the ionic liquid N-butyl-3-methylpyridinium dicyanamide is a highly active, cheap, and selective metal-free catalyst for the electrochemical synthesis of hydrogen peroxide that has the potential for use in a safe, sustainable, and cheap flow-reactor-based method for H2O2 production. [ABSTRACT FROM AUTHOR]