Search

Understanding the pathways by which simple RNA viruses self-assemble from their coat proteins and RNA is of practical and fundamental interest. Although RNA–protein interactions are thought to play a critical role in the assembly, our understanding of their effects is limited because the assembly process is difficult to observe directly. We address this problem by using interferometric scattering microscopy, a sensitive optical technique with high dynamic range, to follow the in vitro assembly kinetics of more than 500 individual particles of brome mosaic virus (BMV)—for which RNA–protein interactions can be controlled by varying the ionic strength of the buffer. We find that when RNA–protein interactions are weak, BMV assembles by a nucleation-and-growth pathway in which a small cluster of RNA-bound proteins must exceed a critical size before additional proteins can bind. As the strength of RNA–protein interactions increases, the nucleation time becomes shorter and more narrowly distributed, but the time to grow a capsid after nucleation is largely unaffected. These results suggest that the nucleation rate is controlled by RNA–protein interactions, while the growth process is driven less by RNA–protein interactions and more by protein–protein interactions and intraprotein forces. The nucleated pathway observed with the plant virus BMV is strikingly similar to that previously observed with bacteriophage MS2, a phylogenetically distinct virus with a different host kingdom. These results raise the possibility that nucleated assembly pathways might be common to other RNA viruses.

Intermediates of the self-assembly process of the salt stable cowpea chlorotic mottle virus (ss-CCMV) capsid can be modelled atomistically on realistic computational timescales either by studying oligomers in equilibrium or by focusing on their dissociation instead of their association. Our previous studies showed that among the three possible dimer interfaces in the icosahedral capsid, two are thermodynamically relevant for capsid formation. The aim of the current study is to evaluate the relative structural stabilities of the three different ss-CCMV dimers and to find and understand the conditions that lead to their dissociation. Long timescale molecular dynamics simulations at 300 K of the various dimers and of the pentamer of dimers underscore the importance of large contact surfaces on stabilizing the capsid subunits within an oligomer. Simulations in implicit solvent show that at higher temperature (350 K), the N-terminal tails of the protein units act as tethers, delaying dissociation for all but the most stable interface. The pentamer of dimers is also found to be stable on long timescales at 300 K, with an inherent flexibility of the outer protein chains.

Cowpea chlorotic mottle virus (CCMV) is a widely used model for virus replication studies. A major challenge lies in distinguishing between the roles of the interaction between coat proteins and that between the coat proteins and the viral RNA in assembly and disassembly processes. Here, we report on the spontaneous and reversible size conversion of the empty capsids of a CCMV capsid protein functionalized with a hydrophobic elastin-like polypeptide which occurs following a pH jump. We monitor the concentrations of T = 3 and T = 1 capsids as a function of time and show that the time evolution of the conversion from one T number to another is not symmetric: The conversion from T = 1 to T = 3 is a factor of 10 slower than that of T = 3 to T = 1. We explain our experimental findings using a simple model based on classical nucleation theory applied to virus capsids, in which we account for the change in the free protein concentration, as the different types of shells assemble and disassemble by shedding or absorbing single protein subunits. As far as we are aware, this is the first study confirming that both the assembly and disassembly of viruslike shells can be explained through classical nucleation theory, reproducing quantitatively results from time-resolved experiments.

Protein cages hold much promise as carrier systems in nanomedicine, due to their well-defined size, cargo-loading capacity, and inherent biodegradability. In order to make them suitable for drug delivery, they have to be stable under physiological conditions. In addition, often surface modifications are required, for example, to improve cell targeting or reduce the particle immunogenicity by PEGylation. For this purpose, we investigated the functionalization capacity of the capsid of cowpea chlorotic mottle virus (CCMV), modified at the interior with a stabilizing elastin-like polypeptide (ELP) tag, by employing a combination of protein engineering and bio-orthogonal chemistry. We first demonstrated the accessibility of the native cysteine residue in ELP-CCMV as a site-selective surface-exposed functional handle, which was not available in the native CCMV capsid. An additional bio-orthogonal functional handle was introduced by incorporation of the noncanonical amino acid, azido-phenylalanine (AzF), using the amber suppression mechanism. Dual site-selective presentation of both a cell-penetrating TAT peptide and a fluorophore to track the particles was demonstrated successfully in HeLa cell uptake studies.

The increasing interest in virus-like particles (VLPs) has been reflected by the growing number of studies on their assembly and application. However, the formation of complete VLPs is a complex phenomenon, making it difficult to rationally design VLPs with desired features

Capsid disassembly and genome release are critical steps in the lifecycle of a virus. However, their mechanisms are poorly understood, both in vivo and in vitro. Here, we have identified two in vitro disassembly pathways of the brome mosaic virus (BMV) by charge detection mass spectrometry and transmission electron microscopy. When subjected to a pH jump to a basic environment at low ionic strength, protein-RNA interactions are disrupted. Under these conditions, BMV appears to disassemble mainly through a global cleavage event into two main fragments: a near complete capsid that has released the RNA and the released RNA complexed to a small number of the capsid proteins. Upon slow buffer exchange to remove divalent cations at neutral pH, capsid protein interactions are disrupted. The BMV virions swell but there is no measurable loss of the RNA. Some of the virions break into small fragments, leading to an increase in the abundance of species with masses less than 1 MDa. The peak attributed to the BMV virion shifts to a higher mass with time. The mass increase is attributed to additional capsid proteins associating with the disrupted capsid protein-RNA complex, where the RNA is presumably partially exposed. It is likely that this pathway is more closely related to how the capsid disassembles in vivo, as it offers the advantage of protecting the RNA with the capsid protein until translation begins.

A virus in its most simple form is comprised of a protein capsid that surrounds and protects the viral genome. The self-assembly of such structures, however, is a highly complex, multiprotein, multiinteraction process and has been a topic of study for a number of years. This self-assembly process is driven by the (mainly electrostatic) interaction between the capsid proteins (CPs) and the genome as well as by the protein–protein interactions, which primarily rely on hydrophobic interactions. Insight in the thermodynamics that is involved in virus and virus-like particle (VLP) formation is crucial in the detailed understanding of this complex assembly process. Therefore, we studied the assembly of CPs of the cowpea chlorotic mottle virus (CCMV) templated by polyanionic species (cargo), that is, single-stranded DNA (ssDNA), and polystyrene sulfonate (PSS) using isothermal titration calorimetry. By separating the electrostatic CP–cargo interaction from the full assembly interaction, we conclude that CP–CP interactions cause an enthalpy change of −3 to −4 kcal mol–1 CP. Furthermore, we quantify that upon reducing the CP–CP interaction, in the case of CCMV by increasing the pH to 7, the CP–cargo starts to dominate VLP formation. This is highlighted by the three times higher affinity between CP and PSS compared to CP and ssDNA, resulting in the disassembly of CCMV at neutral pH in the presence of PSS to yield PSS-filled VLPs.

While extensive studies of virus capsid assembly in environments mimicking in vivo conditions have led to an understanding of the thermodynamic driving forces at work, applying this knowledge to virus assembly in other solvents than aqueous buffers has not been attempted yet. In this study, Brome mosaic virus (BMV) capsid proteins were shown to preserve their self-assembly abilities in an aprotic polar solvent, dimethyl sulfoxide (DMSO). This facilitated protein cage encapsulation of nanoparticles and dye molecules that favor organic solvents, such as β-NaYF4-based upconversion nanoparticles and BODIPY dye. Assembly was found to be robust relative to a surprisingly broad range of DMSO concentrations. Cargos with poor initial stability in aqueous solutions were readily encapsulated at high DMSO concentrations and then transferred to aqueous solvents, where they remained stable and preserved their function for months.

In certain conditions, dye-conjugated icosahedral virus shells exhibit suppression of concentration quenching. The recently observed radiation brightening at high fluorophore densities has been attributed to coherent emission, i.e., to a cooperative process occurring within a subset of the virus-supported fluorophores. Until now, the distribution of fluorophores among potential conjugation sites and the nature of the active subset remained unknown. With the help of mass spectrometry and molecular dynamics simulations, we found which conjugation sites in the brome mosaic virus capsid are accessible to fluorophores. Reactive external surface lysines but also those at the lumenal interface where the coat protein N-termini are located showed virtually unrestricted access to dyes. The third type of labeled lysines was situated at the intercapsomeric interfaces. Through limited proteolysis of flexible N-termini, it was determined that dyes bound to them are unlikely to be involved in the radiation brightening effect. At the same time, specific labeling of genetically inserted cysteines on the exterior capsid surface alone did not lead to radiation brightening. The results suggest that lysines situated within the more rigid structural part of the coat protein provide the chemical environments conducive to radiation brightening, and we discuss some of the characteristics of these environments.

Virus-like particles (VLPs), due to their nanoscale dimensions, presence of interior cavities, self-organization abilities and responsiveness to environmental changes, are of interest in the field of nanotechnology. Nevertheless, comprehensive knowledge of VLP self-assembly principles is incomplete. VLP formation is governed by two types of interactions: protein–cargo and protein–protein. These interactions can be modulated by the physicochemical properties of the surroundings. Here, we used brome mosaic virus (BMV) capsid protein produced in an E. coli expression system to study the impact of ionic strength, pH and encapsulated cargo on the assembly of VLPs and their features. We showed that empty VLP assembly strongly depends on pH whereas ionic strength of the buffer plays secondary but significant role. Comparison of VLPs containing tRNA and polystyrene sulfonic acid (PSS) revealed that the structured tRNA profoundly increases VLPs stability. We also designed and produced mutated BMV capsid proteins that formed VLPs showing altered diameters and stability compared to VLPs composed of unmodified proteins. We also observed that VLPs containing unstructured polyelectrolyte (PSS) adopt compact but not necessarily more stable structures. Thus, our methodology of VLP production allows for obtaining different VLP variants and their adjustment to the incorporated cargo.

Viruses avoid exposure of the viral genome to harmful agents with the help of a protective protein shell known as the capsid. A secondary effect of this protective barrier is that macromolecules that may be in high concentration on the outside cannot freely diffuse across it. Therefore, inside the cell and possibly even outside, the intact virus is generally under a state of osmotic stress. Viruses deal with this type of stress in various ways. In some cases, they might harness it for infection. However, the magnitude and influence of osmotic stress on virus physical properties remains virtually unexplored for single-stranded RNA viruses - the most abundant class of viruses. Here, we report on how a model system for the positive-sense RNA icosahedral viruses, brome mosaic virus (BMV), responds to osmotic pressure. Specifically, we study the mechanical properties and structural stability of BMV under controlled molecular crowding conditions. We show that BMV is mechanically reinforced under a small external osmotic pressure but starts to yield after a threshold pressure is reached. We explain this mechanochemical behavior as an effect of the molecular crowding on the entropy of the "breathing"fluctuation modes of the virus shell. The experimental results are consistent with the viral RNA imposing a small negative internal osmotic pressure that prestresses the capsid. Our findings add a new line of inquiry to be considered when addressing the mechanisms of viral disassembly inside the crowded environment of the cell.

The vast majority of plant viruses are unenveloped, i.e., they lack a lipid bilayer that is characteristic of most animal viruses. The interactions between plant viruses, and between viruses and surfaces, properties that are essential for understanding their infectivity and to their use as bionanomaterials, are largely controlled by their surface charge, which depends on pH and ionic strength. They may also depend on the charge of their contents, i.e., of their genes or–in the instance of virus-like particles–encapsidated cargo such as nucleic acid molecules, nanoparticles or drugs. In the case of enveloped viruses, the surface charge of the capsid is equally important for controlling its interaction with the lipid bilayer that it acquires and loses upon leaving and entering host cells. We have previously investigated the charge on the unenveloped plant virus Cowpea Chlorotic Mottle Virus (CCMV) by measurements of its electrophoretic mobility. Here we examine the electrophoretic properties of a structurally and genetically closely related bromovirus, Brome Mosaic Virus (BMV), of its capsid protein, and of its empty viral shells, as functions of pH and ionic strength, and compare them with those of CCMV. From measurements of both solution and gel electrophoretic mobilities (EMs) we find that the isoelectric point (pI) of BMV (5.2) is significantly higher than that of CCMV (3.7), that virion EMs are essentially the same as those of the corresponding empty capsids, and that the same is true for the pIs of the virions and of their cleaved protein subunits. We discuss these results in terms of current theories of charged colloidal particles and relate them to biological processes and the role of surface charge in the design of new classes of drug and gene delivery systems.

Enzymatic nanoreactors were obtained by galactose-1-phosphate uridylyl-transferase (GALT) encapsulation into plant virus capsids by a molecular self-assembly strategy. The aim of this work was to produce virus-like nanoparticles containing GALT for an enzyme-replacement therapy for classic galactosemia. The encapsulation efficiency and the catalytic constants of bio-nanoreactors were determined by using different GALT and virus coat protein ratios. The substrate affinity of nanoreactors was slightly lower than that of the free enzyme; the activity rate was 16 % of the GALT free enzyme. The enzymatic nanoreactors without functionalization were internalized into different cell lines including fibroblast and kidney cells, but especially into hepatocytes. The enzymatic nanoreactors are an innovative enzyme preparation with potential use for the treatment of classic galactosemia.

Colloidal nanobubbles occur in gas-saturated aqueous solutions following high power water electrolysis. Here the influence of nanobubble solutions on the self-assembly properties of viral capsid proteins (CP) was investigated. Interestingly, we found that gas solutions were able to trigger the self-assembly of CP of cowpea chlorotic mottle virus (CCMV) in the absence of the viral genome, most likely by acting as a negatively charged template. The process was demonstrated by three distinct techniques, namely, dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). Furthermore, nanobubble-induced self-assembly of viral CP was found to depend on protein concentration. Low CP concentrations led to assembly of 18 nm virus-like particles (VLPs), comparable to T = 1 (Casper and Klug triangulation number) virus capsids, whereas high CP concentrations led to 28 nm VLPs (similar to T = 3 capsids). This paves a new route for self-assembly of VLPs.

Non-enveloped RNA viruses pervade all domains of life. In a cell, they co-assemble from viral RNA and capsid proteins. Virus-like particles can form in vitro where virtually any non-cognate polyanionic cargo can be packaged. How only viral RNA gets selected for packaging in vivo, in presence of myriad other polyanionic species, has been a puzzle. Through a combination of charge detection mass spectrometry and cryo-electron microscopy, it is determined that co-assembling brome mosaic virus (BMV) coat proteins and nucleic acid oligomers results in capsid structures and stoichiometries that differ from the icosahedral virion. These previously unknown shell structures are strained and less stable than the native one. However, they contain large native structure fragments that can be recycled to form BMV virions, should a viral genome become available. The existence of such structures suggest the possibility of a previously unknown regulatory pathway for the packaging process inside cells.

We report the asymmetric reconstruction of the single-stranded RNA (ssRNA) content in one of the three otherwise identical virions of a multipartite RNA virus, brome mosaic virus (BMV). We exploit a sample consisting exclusively of particles with the same RNA content—specifically, RNAs 3 and 4—assembled in planta by agrobacterium-mediated transient expression. We find that the interior of the particle is nearly empty, with most of the RNA genome situated at the capsid shell. However, this density is disordered in the sense that the RNA is not associated with any particular structure but rather, with an ensemble of secondary/tertiary structures that interact with the capsid protein. Our results illustrate a fundamental difference between the ssRNA organization in the multipartite BMV viral capsid and the monopartite bacteriophages MS2 and Qβ for which a dominant RNA conformation is found inside the assembled viral capsids, with RNA density conserved even at the center of the particle. This can be understood in the context of the differing demands on their respective lifecycles: BMV must package separately each of several different RNA molecules and has been shown to replicate and package them in isolated, membrane-bound, cytoplasmic complexes, whereas the bacteriophages exploit sequence-specific “packaging signals” throughout the viral RNA to package their monopartite genomes.

Viral capsids are dynamic assemblies that undergo controlled conformational transitions to perform various biological functions. The replication-derived four-molecule RNA progeny of Brome mosaic virus (BMV) is packaged by a single capsid protein (CP) into three types of morphologically indistinguishable icosahedral virions with T=3 quasisymmetry. Type 1 (B1(V)) and type 2 (B2(V)) virions package genomic RNA1 and RNA2, respectively, while type 3 (B3+4(V)) virions copackage genomic RNA3 (B3) and its subgenomic RNA4 (sgB4). In this study, the application of a robust Agrobacterium-mediated transient expression system allowed us to assemble each virion type separately in planta. Experimental approaches analyzing the morphology, size, and electrophoretic mobility failed to distinguish between the virion types. Thermal denaturation analysis and protease-based peptide mass mapping experiments were used to analyze stability and the conformational dynamics of the individual virions, respectively. The crystallographic structure of the BMV capsid shows four trypsin cleavage sites (K(65), R(103), K(111), and K(165) on the CP subunits) exposed on the exterior of the capsid. Irrespective of the digestion time, while retaining their capsid structural integrity, B1(V) and B2(V) released a single peptide encompassing amino acids 2 to 8 of the N-proximal arginine-rich RNA binding motif. In contrast, B3+4(V) capsids were unstable with trypsin, releasing several peptides in addition to the peptides encompassing four predicted sites exposed on the capsid exterior. These results, demonstrating qualitatively different dynamics for the three types of BMV virions, suggest that the different RNA genes they contain may have different translational timing and efficiency and may even impart different structures to their capsids. IMPORTANCE The majority of viruses contain RNA genomes protected by a shell of capsid proteins. Although crystallographic studies show that viral capsids are static structures, accumulating evidence suggests that, in solution, virions are highly dynamic assemblies. The three genomic RNAs (RNA1, -2, and -3) and a single subgenomic RNA (RNA4) of Brome mosaic virus (BMV), an RNA virus pathogenic to plants, are distributed among three physically homogeneous virions. This study examines the thermal stability by differential scanning fluorimetry (DSF) and capsid dynamics by matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) analyses following trypsin digestion of the three virions assembled separately in vivo using the Agrobacterium-mediated transient expression approach. The results provide compelling evidence that virions packaging genomic RNA1 and -2 are distinct from those copackaging RNA3 and -4 in their stability and dynamics, suggesting that RNA-dependent capsid dynamics play an important biological role in the viral life cycle.

Previous self-assembly experiments on a model icosahedral plant virus have shown that, under physiological conditions, capsid proteins initially bind to the genome through an en masse mechanism and form nucleoprotein complexes in a disordered state, which raises the questions as to how virions are assembled into a highly ordered structure in the host cell. Using small-angle X-ray scattering, we find out that a disorder-order transition occurs under physiological conditions upon an increase in capsid protein concentrations. Our cryo-transmission electron microscopy reveals closed spherical shells containing in vitro transcribed viral RNA even at pH 7.5, in marked contrast with the previous observations. We use Monte Carlo simulations to explain this disorder-order transition and find that, as the shell grows, the structures of disordered intermediates in which the distribution of pentamers does not belong to the icosahedral subgroups become energetically so unfavorable that the caps can easily dissociate and reassemble overcoming the energy barriers for the formation of perfect icosahedral shells. In addition, we monitor the growth of capsids under the condition that the nucleation and growth is the dominant pathway and show that the key for the disorder-order transition in both en masse and nucleation and growth pathways lies in the strength of elastic energy compared to the other forces in the system including protein-protein interactions and the chemical potential of free subunits. Our findings explain, at least in part, why perfect virions with icosahedral order form under different conditions including physiological ones., Comment: 17 pages, 21 figures, 1 table, 1 appendix

Virus capsids, i.e., viruses devoid of their genetic material, are suitable nanocarriers for biomedical applications such as drug delivery and diagnostic imaging. For this purpose, the reliable encapsulation of cargo in such a protein nanocage is crucial, which can be accomplished by the covalent attachment of the compounds of interest to the protein domains positioned at the interior of the cage. This approach is particularly valid for the capsid proteins of the cowpea chlorotic mottle virus (CCMV), which have their N-termini located at the inside of the capsid structure. Here, we examined several site-selective modification methods for covalent attachment and encapsulation of cargo at the N-terminus of the CCMV protein. Initially, we explored approaches to introduce an N-terminal azide functionality, which would allow the subsequent bioorthogonal modification with a strained alkyne to attach the desired cargo. As these methods showed compatibility issues with the CCMV capsid proteins, a strategy based on 2-pyridinecarboxaldehydes for site-specific N-terminal protein modification was employed. This method allowed the successful modification of the proteins, and was applied for the introduction of a bioorthogonal vinylboronic acid moiety. In a subsequent reaction, the proteins could be modified further with a fluorophore using the tetrazine ligation. The application of capsid assembly conditions on the functionalized proteins led to successful particle formation, showing the potential of this covalent encapsulation strategy.

Virus-like particles are very interesting tools for application in bionanotechnology, due to their monodisperse features and biocompatibility. In particular, the cowpea chlorotic mottle virus (CCMV) capsid has been studied extensively as it can be assembled and disassembled reversibly, facilitating cargo encapsulation. CCMV is, however, only stable at physiological conditions when its endogenous nucleic acid cargo is present. To gain more flexibility in the type of cargo encapsulated and to broaden the window of operation, it is interesting to improve the stability of the empty virus-like particles. Here, a method is described to utilize the CCMV capsid at close to physiological conditions as a stable, enzyme-filled nanoreactor. As a proof-of-principle, the encapsulation of T4 lysozyme (T4L) was chosen; this enzyme is a promising antibiotic, but its clinical application is hampered by, for example, its cationic character. It was shown that four T4L molecules can successfully be encapsulated inside CCMV capsids, while remaining catalytically active, which could thus improve the enzyme's application potential.

The packaging of proteins into discrete compartments is an essential feature for cellular efficiency. Inspired by Nature, we harness virus-like assemblies as artificial nanocompartments for enzyme-catalyzed cascade reactions. Using the negative charges of nucleic acid tags, we develop a versatile strategy to promote an efficient noncovalent co-encapsulation of enzymes within a single protein cage of cowpea chlorotic mottle virus (CCMV) at neutral pH. The encapsulation results in stable 21-22 nm sized CCMV-like particles, which is characteristic of an icosahedral T = 1 symmetry. Cryo-EM reconstruction was used to demonstrate the structure of T = 1 assemblies templated by biological soft materials as well as the extra-swelling capacity of these T = 1 capsids. Furthermore, the specific sequence of the DNA tag is capable of operating as a secondary biocatalyst as well as bridging two enzymes for co-encapsulation in a single capsid while maintaining their enzymatic activity. Using CCMV-like particles to mimic nanocompartments can provide valuable insight on the role of biological compartments in enhancing metabolic efficiency. We acknowledge financial support from the ERC Consolidator Grant (Protcage) and the Indonesia Endowment Fund for Education (LPDP). This work was supported in part by grants from the Spanish Ministry of Economy and Competitivity (BFU2014-55475 to JRC) and the Comunidad Autónoma de Madrid (S2013/MIT-2807 to JRC). Sí

Virus-like particles (VLPs), i.e. molecular assemblies that resemble the geometry and organization of viruses, are promising platforms for therapeutics and imaging. Understanding the assembly and cellular uptake pathways of VLPs can contribute to the development of new antiviral drugs and new virus-based materials for the delivery of drugs or nucleic acid-based therapies. Here we report the assembly of capsid proteins of the cowpea chlorotic mottle virus (CCMV) around DNA into defined structures at neutral pH. Depending on the type of DNA used, we are able to create spherical structures of various diameters and rods of various lengths. In order to determine the shape dependency, the cellular uptake routes and intracellular positioning of these formed polymorphic VLPs in RAW264.7, HeLa and HEK 293 cells are evaluated using flow cytometry analysis with specific chemical inhibitors for different uptake routes. We observed particular uptake routes for the various CCMV-based nanostructures, but the experiments point to clathrin-mediated endocytosis as the major route for cell entry for the studied VLPs. Confocal microscopy reveals that the formed VLPs enter the cells, with clear colocalization in the endosomes. The obtained results provide insight in the cargo dependent VLP morphology and increase the understanding of shape dependent uptake into cells, which is relevant in the design of new virus-based structures with applications in drug and gene delivery.

Viruses undergo mesoscopic morphological changes as they interact with host interfaces and in response to chemical cues. The dynamics of these changes, over the entire temporal range relevant to virus processes, are unclear. Here, we report on creep compliance experiments on a small icosahedral virus under uniaxial constant stress. We find that even at small stresses, well below the yielding point and generally thought to induce a Hookean response, strain continues to develop in time via sparse, randomly distributed, relatively rapid plastic events. The intermittent character of mechanical compliance only appears above a loading threshold, similar to situations encountered in granular flows and the plastic deformation of crystalline solids. The threshold load is much smaller for the empty capsids of the brome mosaic virus than for the wild-type virions. The difference highlights the involvement of RNA in stabilizing the assembly interface. Numerical simulations of spherical crystal deformation suggest intermittency is mediated by lattice defect dynamics and identify the type of compression-induced defect that nucleates the transition to plasticity., The work was supported by the Army Research Office, under award W911NF-17-1-0329, and by the National Science Foundation, under award CBET 1740432. M.C.M. acknowledges financial support from the Spanish Government’s MINECO under project FIS2016-76830-C2-2-P.

Unlike double-stranded DNA, single-stranded RNA can be spontaneously packaged into spherical capsids by viral capsid protein (CP) because it is a more compact and flexible polymer. Many systematic investigations of this self-assembly process have been carried out using CP from cowpea chlorotic mottle virus, with a wide range of sequences and lengths of single-stranded RNA. Among these studies are measurements of the relative packaging efficiencies of these RNAs into spherical capsids. In this work, we address a fundamental issue that has received very little attention, namely the question of the preferred curvature of the capsid formed around different RNA molecules. We show in particular that homopolymers of RNA—polyribouridylic acid and polyriboadenylic acid—form exclusively T = 2-sized (∼22-nm diameter) virus-like particles (VLPs) when mixed with cowpea chlorotic mottle virus CP, independent of their length, ranging from 500 to more than 4000 nucleotides. This is in contrast to “normal-composition” RNAs (i.e., molecules with comparable numbers of each of the four nucleotides and hence capable of developing a large amount of secondary structure because of intramolecular complementarity/basepairing); a curvature corresponding to T = 3-size (∼28 nm in diameter) is preferred for the VLPs formed with such RNAs. Our work is consistent with the preferred curvature of VLPs being a consequence of interaction of CP with RNA—in particular, the presence or absence of short RNA duplexes—and suggests that the equilibrium size of the capsid results from a trade-off between this optimum size and the cost of confinement.

Virus-like particles can be formed by self-assembly of capsid protein (CP) with RNA molecules of increasing length. If the protein “insisted” on a single radius of curvature, the capsids would be identical in size, independent of RNA length. However, there would be a limit to length of the RNA, and one would not expect RNA much shorter than native viral RNA to be packaged unless multiple copies were packaged. On the other hand, if the protein did not favor predetermined capsid size, one would expect the capsid diameter to increase with increase in RNA length. Here we examine the self-assembly of CP from cowpea chlorotic mottle virus with RNA molecules ranging in length from 140 to 12,000 nucleotides (nt). Each of these RNAs is completely packaged if and only if the protein/RNA mass ratio is sufficiently high; this critical value is the same for all of the RNAs and corresponds to equal RNA and N-terminal-protein charges in the assembly mix. For RNAs much shorter in length than the 3,000 nt of the viral RNA, two or more molecules are assembled into 24- and 26-nm-diameter capsids, whereas for much longer RNAs (>4,500 nt), a single RNA molecule is shared/packaged by two or more capsids with diameters as large as 30 nm. For intermediate lengths, a single RNA is assembled into 26-nm-diameter capsids, the size associated with T=3 wild-type virus. The significance of these assembly results is discussed in relation to likely factors that maintain T=3 symmetry in vivo.

Virus-like particles (VLPs) are being used for therapeutic developments such as vaccines and drug nanocarriers. Among these, plant virus capsids are gaining interest for the formation of VLPs because they can be safely handled and are noncytotoxic. A paradigm in virology, however, is that plant viruses cannot transfect and deliver directly their genetic material or other cargos into mammalian cells. In this work, we prepared VLPs with the CCMV capsid and the mRNA-EGFP as a cargo and reporter gene. We show, for the first time, that these plant virus-based VLPs are capable of directly transfecting different eukaryotic cell lines, without the aid of any transfecting adjuvant, and delivering their nucleic acid for translation as observed by the presence of fluorescent protein. Our results show that the CCMV capsid is a good noncytotoxic container for genome delivery into mammalian cells.

The survival of viruses partly relies on their ability to self-assemble inside host cells. Although coarse-grained simulations have identified different pathways leading to assembled virions from their components, experimental evidence is severely lacking. Here, we use time-resolved small-angle X-ray scattering to uncover the nonequilibrium self-assembly dynamics of icosahedral viral capsids packaging their full RNA genome. We reveal the formation of amorphous complexes via an en masse pathway and their relaxation into virions via a synchronous pathway. The binding energy of capsid subunits on the genome is moderate (~7kBT0, with kB the Boltzmann constant and T0 = 298 K, the room temperature), while the energy barrier separating the complexes and the virions is high (~ 20kBT0). A synthetic polyelectrolyte can lower this barrier so that filled capsids are formed in conditions where virions cannot build up. We propose a representation of the dynamics on a free energy landscape., The mechanism by which virus capsules assemble around RNA to package their genetic material is not clear. Here, the authors observed the assembly of the cowpea chlorotic mottle virus capsid around viral RNA or poly(styrene sulfonic acid) using time-resolved small-angle X-ray scattering measurements.

The four brome mosaic virus (BMV) RNAs (RNA1 to RNA4) are encapsidated in three distinct virions that have different disassembly rates in infection. The mechanism for the differential release of BMV RNAs from virions is unknown, since 180 copies of the same coat protein (CP) encapsidate each of the BMV genomic RNAs. Using mass spectrometry, we found that the BMV CP contains a complex pattern of posttranslational modifications. Treatment with phosphatase was found to not significantly affect the stability of the virions containing RNA1 but significantly impacted the stability of the virions that encapsidated BMV RNA2 and RNA3/4. Cryo-electron microscopy reconstruction revealed dramatic structural changes in the capsid and the encapsidated RNA. A phosphomimetic mutation in the flexible N-terminal arm of the CP increased BMV RNA replication and virion production. The degree of phosphorylation modulated the interaction of CP with the encapsidated RNA and the release of three of the BMV RNAs. UV cross-linking and immunoprecipitation methods coupled to high-throughput sequencing experiments showed that phosphorylation of the BMV CP can impact binding to RNAs in the virions, including sequences that contain regulatory motifs for BMV RNA gene expression and replication. Phosphatase-treated virions affected the timing of CP expression and viral RNA replication in plants. The degree of phosphorylation decreased when the plant hosts were grown at an elevated temperature. These results show that phosphorylation of the capsid modulates BMV infection. IMPORTANCE How icosahedral viruses regulate the release of viral RNA into the host is not well understood. The selective release of viral RNA can regulate the timing of replication and gene expression. Brome mosaic virus (BMV) is an RNA virus, and its three genomic RNAs are encapsidated in separate virions. Through proteomic, structural, and biochemical analyses, this work shows that posttranslational modifications, specifically, phosphorylation, on the capsid protein regulate the capsid-RNA interaction and the stability of the virions and affect viral gene expression. Mutational analysis confirmed that changes in modification affected virion stability and the timing of viral infection. The mechanism for modification of the virion has striking parallels to the mechanism of regulation of chromatin packaging by nucleosomes.

The applications of viral protein cages have expanded rapidly into the fields of bionanotechnology and materials science. However, the low-cost production of viral capsid proteins (CPs) on a large scale is always a challenge. Herein, we develop a highly efficient expression system by constructing recombinant Pichia pastoris cells as a “factory” for the secretion of soluble cowpea chlorotic mottle virus (CCMV) CPs. Under optimal induction conditions (0.9 mg/mL of methanol concentration at 30 °C for 96 h), a high yield of approximately 95 mg/L of CCMV CPs was harvested from the fermentation supernatant with CPs purity >90%, which has significantly simplified the rest of the purification process. The resultant CPs are employed to encapsulate Ruthenium (Ru) nanoparticles (NPs) via in-vitro self-assembly to prepare hybrid nanocatalyst, i.e. Ru@virus-like particles (VLPs). The catalytic activity over Ru@VLPs was evaluated by reducing 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The results indicate that, with the protection of protein cages, Ru NPs were highly stabilized during the catalytic reaction. This results in enhanced catalytic activity (reaction rate constant k = 0.14 min−1) in comparison with unsupported citrate-stabilized Ru NPs (Ru-CA) (k = 0.08 min−1). Additionally, comparatively lower activation energy over Ru@VLPs (approximately 32 kJ/mol) than that over Ru-CA (approximately 39 kJ/mol) could be attributed to the synergistic effect between Ru NPs and some functional groups such as amino groups (–NH2) on CPs that weakened the activation barrier of 4-NP reduction. Therefore, enhanced activity and decreased activation energy over Ru@VLPs demonstrated the superiority of Ru@VLPs to unsupported Ru-CA.

The formation of a viral particle generally involves hundreds of proteins, making the assembly process intricate. Despite its intrinsic complexity, the production of a viral particle begins through the interaction between the basic assembly components. For the cowpea chlorotic mottle virus (CCMV), the first steps of the assembly process involve dimers of the capsid protein. Here, we carried out atomistic molecular dynamics simulations to investigate the initial assembly process of CCMV to get insight into the interactions at the molecular level. We found that salinity not only affects the electrostatic interactions between dimers but also changes the conformation of the positively charged N-terminal tails and can cause a serious steric hindrance for other dimers binding to the hydrophobic domains. An RNA rod was used to mimic a long segment of a viral genome and to study its interaction with dimers. We observed that the dimer with tails prefers to bind on the RNA rod with its positively charged inner side. The dimer-RNA interaction was found to be as strong as the dimer-dimer interaction, whereas the association energies between a dimer and a pentamer or a hexamer of dimers were high but strongly depended on the presence of the tails. Upon heating, the capsid experienced a shrinkage accompanied by a loss of order in the icosahedral crystal structure.

Protein-based nanoreactors are generated by encapsulating an enzyme inside the capsid of the cowpea chlorotic mottle virus (CCMV). Here, three different noncovalent methods are described to efficiently incorporate enzymes inside the capsid of these viral protein cages. The methods are based on pH, leucine zippers, and electrostatic interactions respectively, as a driving force for encapsulation. The methods are exclusively described for the enzymes horseradish peroxidase, glucose oxidase, and Pseudozyma antarctica lipase B, but they are also applicable for other enzymes.

The controlled self-assembly of protein cages is vital for the use of these nanocompartments in biomedical and nanotechnological applications. Recently, we showed that by combining different structural peptide elements, it is possible to assemble viral capsid proteins in distinct well-defined morphologies. In this chapter, a triblock copolypeptide is discussed, consisting of a metal ion-coordinating hexahistidine tag, a stimulus-responsive elastin-like polypeptide and a pH-responsive self-assembling viral capsid protein. This protein is able to form two different types of capsids, depending on the assembly pathway that is followed. Here, we focus on the metal ion-induced assembly process and describe the relevant experimental procedures to induce and utilize this assembly behavior.

We report a protocol for efficient cell-free synthesis of cowpea chlorotic mottle virus (CCMV)-like particles containing a broad range of lengths and sequences of RNA. Our protocol starts with a purified stock of wild-type CCMV (protocols for harvesting and purifying the virus are detailed elsewhere) and features three basic steps: disassembly of the CCMV and purification of the capsid protein (CP) from the viral RNA; coassembly of the purified CP and an RNA of choice; and characterization of the assembly products. We highlight several key factors that increase the yield of the assembly reaction: the CP should be uncleaved and sufficiently free of viral RNA; the length of the RNA should be between about 100 and 4000 nucleotides; and the stoichiometry of CP and RNA should be 6-1 by mass. Additionally, we point out that separating the assembly reaction into multiple steps-by successively lowering the ionic strength and then the pH of the assembly buffers-results in the highest yields of well-formed, nuclease-resistant, CCMV-like particles. Finally, we describe methods for characterizing the assembly products using native agarose gel electrophoresis and negative-stain transmission electron microscopy.

In cellular systems, compartmentalization plays an important role in the protection and regulation of enzymes. Controlled encapsulation of enzymes in nanocompartments is crucial in understanding biocatalytic processes in the cellular environment. We have recently described an enzymatic method to covalently attach enzymes, equipped with a small recognition peptide, to the interior of viral capsids. Viral capsids are especially interesting in this respect, as they form very well-defined nanoparticles with a uniform size and shape. Here, we describe the relevant experimental procedures to encapsulate a model enzyme into the interior of a viral capsid, purify the resulting viral capsids, and measure the catalytic activity of the encapsulated enzymes.

Understanding the assembly pathway of viruses can contribute to creating monodisperse virus-based materials. In this study, the cowpea chlorotic mottle virus (CCMV) is used to determine the interactions between the capsid proteins of viruses and their cargo. The assembly of the capsid proteins in the presence of different lengths of short, single-stranded (ss) DNA is studied at neutral pH, at which the protein-protein interactions are weak. Chromatography, electrophoresis, microscopy, and light scattering data show that the assembly efficiency and speed of the particles increase with increasing length of oligonucleotides. The minimal length required for assembly under the conditions used herein is 14 nucleotides. Assembly of particles containing such short strands of ssDNA can take almost a month. This slow assembly process enabled the study of intermediate states, which confirmed a low cooperative assembly for CCMV and allowed for further expansion of current assembly theories.

In cellular systems, compartmentalization plays an important role in the protection and regulation of enzymes. Controlled encapsulation of enzymes in nanocompartments is crucial in understanding biocatalytic processes in the cellular environment. We have recently described an enzymatic method to covalently attach enzymes, equipped with a small recognition peptide, to the interior of viral capsids. Viral capsids are especially interesting in this respect, as they form very well-defined nanoparticles with a uniform size and shape. Here, we describe the relevant experimental procedures to encapsulate a model enzyme into the interior of a viral capsid, purify the resulting viral capsids, and measure the catalytic activity of the encapsulated enzymes.

Brome mosaic virus (BMV) (the Russian strain) infects monocot plants and has been studied extensively in barley and wheat. Here, we report BMV can systemically infect rice (Oryza sativa var. japonica), including cultivars in which the genomes have been determined. The BMV capsid protein can be found throughout the inoculated plants. However, infection in rice exhibits delayed symptom expression or no symptoms when compared with wheat (Triticum aestivum). The sequences of BMV RNAs isolated from rice did not reveal any nucleotide changes in RNA1 or RNA2, while RNA3 had only one synonymous nucleotide change from the inoculum sequence. Preparations of purified BMV virions contained RNA1 at a significantly reduced level relative to the other two RNAs. Analysis of BMV RNA replication in rice revealed that minus-strand RNA1 was replicated at a reduced rate when compared with RNA2. Thus, rice appears to either inhibit RNA1 replication or lacks a sufficient amount of a factor needed to support efficient RNA1 replication.

Previous work has shown that purified capsid protein (CP) of cowpea chlorotic mottle virus (CCMV) is capable of packaging both purified single-stranded RNA molecules of normal composition (comparable numbers of A, U, G, and C nucleobases) and of varying length and sequence, and anionic synthetic polymers such as polystyrene sulfonate. We find that CCMV CP is also capable of packaging polyU RNAs, which—unlike normal-composition RNAs—do not form secondary structures and which act as essentially structureless linear polymers. Following our canonical two-step assembly protocol, polyU RNAs ranging in length from 1000 to 9000 nucleotides (nt) are completely packaged. Surprisingly, negative-stain electron microscopy shows that all lengths of polyU are packaged into 22-nm-diameter particles despite the fact that CCMV CP prefers to form 28-nm-diameter (T = 3) particles when packaging normal-composition RNAs. PolyU RNAs >5000 nt in length are packaged into multiplet capsids, in which a single RNA molecule is shared between two or more 22-nm-diameter capsids, in analogy with the multiplets of 28-nm-diameter particles formed with normal-composition RNAs >5000 nt long. Experiments in which viral RNA competes for viral CP with polyUs of equal length show that polyU, despite its lack of secondary structure, is packaged more efficiently than viral RNA. These findings illustrate that the secondary structure of the RNA molecule—and its absence—plays an essential role in determining capsid structure during the self-assembly of CCMV-like particles.

Conventional time of flight ion detectors are based on secondary electron multipliers encountering a significant loss in detection efficiency, sensitivity and resolution with protein mass above 50kDa. In this work we employ a silicon nanomembrane detector in a Matrix-Assisted Laser Desorption/Ionization coupled to time of flight (MALDI-TOF) mass spectrometer. The operating principle relies on phonon-assisted field emission with excellent performance in the high mass range from 0.001-2MDa. In addition to the analysis of standard proteins the nanomembrane detector (NMD) has the potential for the detection and structural investigation of complex macromolecular assemblies through non-covalent interactions. In order to investigate this hypothesis, the N-terminal capping/methyltransferase domain (CAP) of the Brome Mosaic Virus (BMV) 1a replication protein by MALDI-TOF-NMD is analyzed. The signals detected at the high m/z-ratios of 912.6/982.7 (×103) and 1333.3 (×103) could be modified species of CAP-tricta/tetractamer and the octadecamer. For the first time, the NMD is applied to detect biologically complex macromolecular protein assemblies. Hence, this technology overcomes the limitations of conventional TOF-detectors and increases the analytical range of MALDI-TOF. This technology will be a future alternative for the structural analysis of intact virus capsids that will complement other MS-based techniques such as native mass spectrometry.

Molecular dynamics simulations are carried out on a coarse-grained model to describe the polyion driven co-assembly of elastic capsomers as viral-like aggregates. The kinetics and structural properties of the complexes are examined using cationic capsomers, an anionic polyion, both modelled using beads connected by springs, and counterions neutralizing separately the two charged species. Polyion overcharging the capsid is encapsulated owing to combined effects of the capsomer-capsomer short-range interactions, the polyion ability to follow a Hamiltonian path, and Donnan equilibrium. Conditions leading to a high yield of viral-like nanoparticles are found, and the simulations demonstrate that the capsomer elasticity provides mechanisms that improve the reliability toward correctly formed capsids. These mechanisms are related to a highly irregular capsomer cluster growth followed by the appearance of two stable capsomer clusters with the polyion acting as a tether between them. Elevated capsomeric flexibility provides an additional pathway to anneal the kinetically trapped structures by the ejection of a capsomeric monomer from a malformed complex followed by a rebinding step to form a correct capsid.

Computational prediction of native protein-protein interfaces still remains a challenging task. In virus capsids, each protein unit is in contact with copies of itself through several interfaces. The relative strengths of the different contacts affect the dynamics of the assembly, especially if the process is hierarchical. We investigate the dimerization of the salt-stable cowpea chlorotic mottle virus (CCMV) capsid protein using a combination of different computational tools. The best predictions of dimer configurations provided by blind docking with ZDOCK are rescored using geometry optimization with the Amber and Rosetta force fields. We also evaluate the relative stabilities of the three main interfaces present in the icosahedral capsid using locally restricted docking with Rosetta. Both the rescoring and locally restricted docking results report a particularly stable protein-protein interface, which is the most likely intermediate during the first stage of the hierarchical capsid assembly. The blind docking results rescored with both Amber and Rosetta yield docking funnels, i.e., three or more near-native structures among the top five predictions. The results support experimental observations on in vitro assembly of CCMV capsids. The cross-validation of the results suggests that energy-landscape-based methods with biomolecular force fields have the potential to improve existing docking procedures.

We present a generalized Landau-Brazovskii free energy for the solidification of chiral molecules on a spherical surface in the context of the assembly of viral shells. We encounter two types of icosahedral solidification transitions. The first type is a conventional first-order phase transition from the uniform to the icosahedral state. It can be described by a single icosahedral spherical harmonic of even $l$. The chiral pseudo-scalar term in the free energy creates secondary terms with chiral character but it does not affect the thermodynamics of the transition. The second type, associated with icosahedral spherical harmonics with odd $l$, is anomalous. Pure odd $l$ icosahedral states are unstable but stability is recovered if admixture with the neighboring $l+1$ icosahedral spherical harmonic is included, generated by the non-linear terms. This is in conflict with the principle of Landau theory that symmetry-breaking transitions are characterized by only a \textit{single} irreducible representation of the symmetry group of the uniform phase and we argue that this principle should be removed from Landau theory. The chiral term now directly affects the transition because it lifts the degeneracy between two isomeric mixed-$l$ icosahedral states. A direct transition is possible only over a limited range of parameters. Outside this range, non-icosahedral states intervene. For the important case of capsid assembly dominated by $l=15$, the intervening states are found to be based on octahedral symmetry.