Search

OBJECTIVE This study examined biomechanical changes in pelvic floor after urogynecological surgery. METHODS This multisite clinical study was designed to explore changes in tissue elasticity, pelvic support, and certain functions (contractive strength, muscle relaxation speed, muscle motility) after pelvic organ prolapse (POP) surgery. A biomechanical mapping of the pelvic floor was performed before and 4 to 6 months after the surgery. The biomechanical data for 52 parameters were acquired by vaginal tactile imaging for manually applied deflection pressures to vaginal walls and pelvic muscle contractions. The two-sample t-test (P < 0.05) was used to test the null hypothesis that presurgery data in group 1 (positive parameter change after surgery) and presurgery data in group 2 (negative parameter change after surgery) belonged to the same distribution. RESULTS A total of 78 subjects with 255 surgical procedures were analyzed across 5 participating clinical sites. All 52 t-tests for group 1 versus group 2 had P value in the range from 4.0 × 10-10 to 4.3 × 10-2 associating all of the 52 parameter changes after surgery with the presurgical conditions. The P value of before and after surgery correlation ranged from 3.7 × 10-18 to 1.6 × 10-2 for 50 of 52 tests, with Pearson correlation coefficient ranging from -0.79 to -0.27. Thus, vaginal tactile imaging parameters strongly correlated weak pelvic floor presurgery with the positive POP surgery outcome of improved biomechanical properties. CONCLUSIONS Pelvic organ prolapse surgery, in general, improves the biomechanical conditions and integrity of the weak pelvic floor. The proposed biomechanical parameters can predict changes resulting from POP surgery.

Introduction Few means exist to provide quantitative and reproducible assessment of vaginal conditions from biomechanical and functional standpoints. Aim To develop a new approach for quantitative biomechanical characterization of the vagina. Methods Vaginal tactile imaging (VTI) allows biomechanical assessment of soft tissue and function along the entire length of the anterior, posterior, and lateral vaginal walls. This can be done at rest, with applied vaginal deformation, and with pelvic muscle contraction. Results Data were analyzed for 42 subjects with normal pelvic floor support from an observational case-controlled clinical study. The average age was 52 years (range = 26–90 years). We introduced 8 VTI parameters to characterize vaginal conditions: (i) maximum resistance force to insertion (newtons), (ii) insertion work (millijoules), (iii) maximum stress-to-strain ratio (elasticity; kilopascals per millimeter), (iv) maximum pressure at rest (kilopascals), (v) anterior-posterior force at rest (newtons), (vi) left-right force at rest (newtons), (vii) maximum pressure at muscle contraction (kilopascals), and (viii) muscle contraction force (newtons). We observed low to moderate correlation of these parameters with subject age and no correlation with subject weight. 6 of 8 parameters demonstrated a P value less than .05 for 2 subject subsamples divided by age (≤52 vs >52 years), which means 6 VTI parameters change with age. Conclusions VTI allows biomechanical and functional characterization of the vaginal conditions that can be used for (i) understanding “normal” vaginal conditions, (ii) quantification of the deviation from normality, (iii) personalized treatment (radiofrequency, laser, or plastic surgery), and (iv) assessment of the applied treatment outcome.

Learning to perform colonoscopy safely and effectively is central to gastroenterology fellowship programs. The application of force to the colonoscope is an important part of colonoscopy technique. We compared force application during colonoscopy between novice and expert endoscopists using a novel device to determine differences in colonoscopy technique. This is an observational cohort study designed to compare force application during colonoscopy between novice and experienced trainees, made up of gastroenterology fellows from two training programs, and expert endoscopists from both academic and private practice settings. Force recordings were obtained for 257 colonoscopies by 37 endoscopists, 21 of whom were trainees. Experts used higher average forward forces during insertion compared to all trainees and significantly less clockwise torque compared to novice trainees. We present significant, objective differences in colonoscopy technique between novice trainees, experienced trainees, and expert endoscopists. These findings suggest that the colonoscopy force monitor is an objective tool for measuring proficiency in colonoscopy. Furthermore, the device may be used as a teaching tool in training and continued medical education programs.

The objective of this study was to evaluate if the Bone UltraSonic Scanner (BUSS) can detect osteoporosis in postmenopausal women. BUSS is an axial transmission multi-frequency ultrasonometer for acquisition of wave propagation profiles along the proximal anterior tibia. We derived 10 diagnostically significant BUSS parameters that were then compared with the DXA spine T-score, which was used in this study as the “gold standard” for the assessment of osteoporosis (T-score

Background To perform a colonoscopy, the endoscopist maneuvers the colonoscope through a series of loops by applying force to the insertion tube. Colonoscopy insertion techniques are operator dependent but have never been comprehensively quantified. Objective To determine whether the Colonoscopy Force Monitor (CFM), a device that continually measures force applied to the insertion tube, can identify different force application patterns among experienced endoscopists. Design Observational study of 6 experienced endoscopists performing routine diagnostic and therapeutic colonoscopy in 30 patients. Setting Outpatient ambulatory endoscopy center. Patients Adult male and female patients between 30 and 75 years of age undergoing routine colonoscopy. Interventions CFM monitoring of force applied to the colonoscope insertion tube during colonoscopy. Main Outcome Measurements Maximum and mean linear and torque force, time derivative of force, combined linear and torque vector force, and total manipulation time. Results The CFM demonstrates differences among endoscopists for maximum and average push/pull and mean torque forces, time derivatives of force, combined push/torque force vector, and total manipulation time. Endoscopists could be grouped by force application patterns. Limitations Only experienced endoscopists using conscious sedation in the patients were studied. Sample size was 30 patients. Conclusions This study demonstrates that CFM allows continuous force monitoring, characterization, and display of similarities and differences in endoscopic technique. CFM has the potential to facilitate training by enabling trainees to assess, compare, and quantify their techniques and progress.

Mechanical imaging yields tissue elasticity map and provides quantitative characterization of a detected pathology. The changes in the surface stress patterns as a function of applied load provide information about the elastic composition and geometry of the underlying tissue structures. The objective of this study is the clinical evaluation of breast mechanical imager for breast lesion characterization and differentiation between benign and malignant lesions. The breast mechanical imager includes a probe with pressure sensor array, an electronic unit providing data acquisition from the pressure sensors and communication with a touch-screen laptop computer. We have developed an examination procedure and algorithms to provide assessment of breast lesion features such as hardness related parameters, mobility, and shape. A statistical Bayesian classifier was constructed to distinguish between benign and malignant lesions by utilizing all the listed features as the input. Clinical results for 179 cases, collected at four different clinical sites, have demonstrated that the breast mechanical imager provides a reliable image formation of breast tissue abnormalities and calculation of lesion features. Malignant breast lesions (histologically confirmed) demonstrated increased hardness and strain hardening as well as decreased mobility and longer boundary length in comparison with benign lesions. Statistical analysis of differentiation capability for 147 benign and 32 malignant lesions revealed an average sensitivity of 91.4% and specificity of 86.8% with a standard deviation of +/-6.1%. The area under the receiver operating characteristic curve characterizing benign and malignant lesion discrimination is 86.1% with the confidence interval ranging from 80.3 to 90.9%, with a significance level of P = 0.0001 (area = 50%). The multisite clinical study demonstrated the capability of mechanical imaging for characterization and differentiation of benign and malignant breast lesions. We hypothesize that the breast mechanical imager has the potential to be used as a cost effective device for cancer diagnostics that could reduce the benign biopsy rate, serve as an adjunct to mammography and to be utilized as a screening device for breast cancer detection.

The present study examines the association of the changes in ultrasound velocity measured at 1 MHz using 1.5 micros duration tone burst in the human soleus muscle in vivo with several pathologies including patients with chronic renal failure (CRF) and disorders of the cardiovascular system. Total 127 subjects were investigated, with approximately equal number of male and female subjects uniformly distributed by age, from 15 to 70 years old. Since molecular composition of the tissue is thought to have greater effect on the bulk ultrasound velocity, potential contribution of both water and fat, two main variable components of a muscle, were taken into account. Observed negative correlation of ultrasound velocity with the body mass index was considered a result of an elevated fat content. Based on the obtained data, presence of leg edemas results in a measurably lower ultrasound velocity in the soleus muscle. Unless patients had visibly detected leg edema, no difference between healthy individuals, patients with chronic heart failure, or CRF was found. Despite relatively high individual variations in velocity, ranging from 1530 to 1615 m/s, a statistically significant gender correlated difference between average values of the velocity was observed. No dependence of velocity on subject age was detected. An indirect confirmation of the muscle fluid homeostasis was revealed in patients with CRF undergoing hemodialysis procedure. After hemodialysis, a significantly smaller increase (0.3% in average) of ultrasound velocity in the soleus muscle was observed than otherwise could be expected if a uniform relative loss of total body fluids was assumed (1-1.3%). In general, the study findings set a premise for using ultrasound velocity as a potential quantitative parameter for edema assessment.

Tissue water content is an important diagnostic parameter that can be used for estimation of water loss in muscles such as common dehydration during high endurance exercises. It could be also applied for evaluation of the increased fluids content in the tissue caused by the variety of pathological conditions or edemas. Ultrasonic method for tissue water content monitoring is based on the premise that the speed of a bulk or compression sound wave is determined mainly by the molecular content of the tissue. Most soft tissues, including muscles that consist of about 70-80% water, exhibit shift of the ultrasound velocity associated with the change in their water content. In the present paper, we tested the feasibility of assessing changes in tissue water content by measurements of ultrasound velocity in ex vivo animal muscle tissues. An increase in the ultrasound velocity correlated with the volumetric water loss in the tissue was observed when other tissue components (proteins, fat) remained constant. Possibility to assess muscle dehydration with 1% accuracy was confirmed in model dehydration experiments, where ultrasound velocity slope of about 3 m/s per 1% of water loss was revealed at measurement error less than 2 m/s. Hence, the ultrasonic approach can provide basis for a convenient, lightweight system in sports medicine for monitoring total body hydration during long-term endurance exercise in hot conditions, as well as for edemas monitoring and other medical applications.

Colonoscopy is the most sensitive and specific means for detection of colon cancers and polyps. To make colonoscopy more effective several problems must be overcome including: pain associated with the procedure, the risk of perforation, and incomplete intubation colonoscopy. Technically, these problems are the result of loop formation during colonoscopy. Although, several solutions such as modifying the stiffness of the colonoscope, using an overtube and developing image-guided instruments have been introduced to resolve the looping problem, the results of these systems are not completely satisfactory. A new paradigm to overcome loop formation is proposed that is doctor-assistive colonoscopy. In this approach, the endoscopists performance is enhanced by providing using a kinetic model that provides information such as the shape of the scope, direction of the colon and forces exerted within certain sections. It is expected that with the help of this model, the endoscopist would be able to adjust the manipulation to avoid loop formation. In the present studies, the kinetic model is developed and validated using an ex vivo colonoscopy test-bed with a comprehensive kinematic and kinetic data collection. The model utilizes an established colon model based on animal tissue with position tracking sensors, contact force sensors for the intraluminal portion of the scope and a Colonoscopy Force Monitor for the external insertion tube.

Findings from a pilot clinical study of a novel Infant Hydration Monitor (IHM) are presented. IHM is a portable device measuring ultrasound velocity (USV) through the leg muscles in young infants to monitor changes of their hydration status. Study in newborns revealed that USV in their muscles is lower than in adults, indicating higher water content in the tissue by an average of 12%. Observed cases of short term changes of USV can be explained by hydration changes during applied hydration therapy or water detention regiments.

Multiple acoustic wave mode method has been proposed as a new modality in axial bone QUS. The new method is based on measurement of ultrasound velocity at different ratio of wavelength to the bone thickness, and taking into account both bulk and guided waves. It allows assessment of changes in both the material properties related to porosity and mineralization as well as the cortical thickness influenced by resorption from inner layers, which are equally important in diagnostics of osteoporosis and other bone osteopenia. Developed method was validated in model studies using a dual-frequency (100 and 500 kHz) ultrasound device. Three types of bone phantoms for long bones were developed and tested: (1) tubular specimens from polymer materials to model combined changes of material stiffness and cortical wall thickness; (2) layered specimens to model porosity in compact bone progressing from endosteum towards periosteum; (3) animal bone specimens with both cortical and trabecular components. Observed changes of the ultrasound velocity of guided waves at 100 kHz followed gradual changes in the thickness of the intact cortical layer. On the other hand, the bulk velocity at 500 kHz remained nearly constant at the different cortical layer thickness but was affected by the material stiffness. Similar trends were observed in phantoms and in fragments of animal bones.