Search

In situ heart valve tissue engineering is an emerging approach in which resorbable, off-the-shelf available scaffolds are used to induce endogenous heart valve restoration. Such scaffolds are designed to recruit endogenous cells in vivo, which subsequently resorb polymer and produce and remodel new valvular tissue in situ. Recently, preclinical studies using electrospun supramolecular elastomeric valvular grafts have shown that this approach enables in situ regeneration of pulmonary valves with long-term functionality in vivo. However, the evolution and mechanisms of inflammation, polymer absorption and tissue regeneration are largely unknown, and adverse valve remodeling and intra- and inter-valvular variability have been reported. Therefore, the goal of the present study was to gain a mechanistic understanding of the in vivo regenerative processes by combining routine histology and immunohistochemistry, using a comprehensive sheep-specific antibody panel, with Raman microspectroscopy for the spatiotemporal analysis of in situ tissue-engineered pulmonary valves with follow-up to 24 months from a previous preclinical study in sheep. The analyses revealed a strong spatial heterogeneity in the influx of inflammatory cells, graft resorption, and foreign body giant cells. Collagen maturation occurred predominantly between 6 and 12 months after implantation, which was accompanied by a progressive switch to a more quiescent phenotype of infiltrating cells with properties of valvular interstitial cells. Variability among specimens in the extent of tissue remodeling was observed for follow-up times after 6 months. Taken together, these findings advance the understanding of key events and mechanisms in material-driven in situ heart valve tissue engineering. Statement of significance This study describes for the first time the long-term in vivo inflammatory and regenerative processes that underly in situ heart valve tissue engineering using resorbable synthetic scaffolds. Using a unique combinatorial analysis of immunohistochemistry and Raman microspectroscopy, important spatiotemporal variability in graft resorption and tissue formation was pinpointed in in situ tissue-engineered heart valves, with a follow-up time of up to 24 months in sheep. This variability was correlated to heterogenous regional cellular repopulation, most likely instigated by region-specific differences in surrounding tissue and hemodynamics. The findings of this research contribute to the mechanistic understanding of in situ tissue engineering using resorbable synthetics, which is necessary to enable rational design of improved grafts, and ensure safe and robust clinical translation.

Background Right ventricular outflow tract (RVOT) conduits used in children with congenital heart disease often degenerate rapidly or develop other complications, and they do not grow with the patient. This leads to multiple surgeries until adult-sized conduits can be implanted. We report experimental in vivo experience with an entirely synthetic absorbable graft, designed to be replaced by tissue in-vivo by host cells, in a process termed Endogenous Tissue Restoration (ETR), and to grow commensurate with somatic growth. Methods We characterized the structure, mechanical properties, biocompatibility, and in vivo remodelling of a bioabsorbable polyester based on the self-complementary ureido-pyrimidinone (UPy) quadruple hydrogen-bonding motif. Electrospinning was used to process the polymer into a tubular graft with a highly porous wall structure, which was implanted as a pulmonary artery interposition graft in 9 adult sheep with a maximum follow-up of 1 year, followed by pathologic and mechanical analysis. Results All grafts were patent by transthoracic echocardiography. Eight were intact at post-mortem examination. One graft had aneurysmal dilation. Graft polymer resorption in vivo was consistent among specimens. Histologic examination revealed progressive tissue replacement of graft polymer, ongoing at one year, with remodeling to a structure that had some key features of native vascular wall. Burst pressures for all explants at 8 weeks and beyond were higher than those of native pulmonary artery (PA) and largely determined by newly formed tissue. Conclusions Preclinical studies of a new, absorbable polymeric graft for PA replacement showed remodelling by endogenous cells up to one-year follow-up. Our results show that ETR leads to progressive and substantial replacement of an off-the-shelf synthetic bioabsorbable conduit by functional host tissue to one year in sheep. Thus, further development of this novel concept is warranted.

The use of bioprosthetic valves (BPV) implanted surgically or by transcatheter valve implantation (TAVI) has increased dramatically in recent years. Currently, BPVs comprise an overwhelming majorit...

The chapters that comprise Part 3 of this text summarize key principles and provide a “toolkit” for medical device innovation. They discuss total product life cycle for medical devices, safety and risk management, sterilization and disinfection consideration, verification and validation, bench-to-bedside translation, regulatory pathways and constraints, role of standards for testing of biomaterials, implant retrieval, evaluation and analysis, and legal and ethical concerns over the use of biomaterials in medical devices.

Cardiovascular disease is the leading cause of mortality and morbidity globally. Several subtypes of cardiovascular disease require innovative surgical and interventional diagnostic and therapeutic procedures and devices which are composed of highly advanced biomaterials. The recognition and understanding of complications of these devices, many of them related to the biomaterials that comprise them, has led to iterative efforts to improve their performance and safety through biomaterials and device research and development which have been translated into better patient care. This chapter and the one following summarize key considerations in cardiovascular medical devices, including the underlying pathology of the conditions they are designed for and used to treat, relevant biomaterials of which they are fabricated, and the most important complications that need to be avoided, mitigated or managed. This chapter emphasizes biomaterials and engineering design issues relevant to cardiac valve prostheses, pacemakers and implantable cardioverter-defibrillators, implantable cardiac assist devices and artificial hearts, and miscellaneous intra-cardiac devices, including percutaneous catheter-based techniques to treat cardiovascular disease in a minimally invasive manner, such as septal defect closure devices, and left atrial occlusion devices. The following chapter discusses devices used for vascular repair and replacement (including vascular grafts and endovascular stents and stent grafts), filters to prevent pulmonary embolism, catheters and other cardiovascular devices that reside outside the heart.

Tissue engineered heart valve (TEHV) technology may overcome deficiencies of existing available heart valve substitutes. The pathway by which TEHVs will undergo development and regulatory approval has several challenges. In this communication, we review: (1) the regulatory framework for regulation of medical devices in general and substitute heart valves in particular; (2) the special challenges of preclinical testing using animal models for TEHV, emphasizing the International Standards Organization (ISO) guidelines in document 5840; and (3) considerations that suggest a translational roadmap to move TEHV forward from pre-clinical to clinical studies and clinical implementation.

Heart valves control unidirectional blood flow within the heart during the cardiac cycle. They have a remarkable ability to withstand the demanding mechanical environment of the heart, achieving lifetime durability by processes involving the ongoing remodeling of the extracellular matrix. The focus of this review is on heart valve functional physiology, with insights into the link between disease-induced alterations in valve geometry, tissue stress, and the subsequent cell mechanobiological responses and tissue remodeling. We begin with an overview of the fundamentals of heart valve physiology and the characteristics and functions of valve interstitial cells (VICs). We then provide an overview of current experimental and computational approaches that connect VIC mechanobiological response to organ- and tissue-level deformations and improve our understanding of the underlying functional physiology of heart valves. We conclude with a summary of future trends and offer an outlook for the future of heart valve mechanobiology, specifically, multiscale modeling approaches, and the potential directions and possible challenges of research development. © 2016 American Physiological Society. Compr Physiol 6:1743-1780, 2016.

The past several decades have witnessed major advances in the understanding of the structure, function, and biology of native valves and the pathobiology and clinical management of valvular heart disease. These improvements have enabled earlier and more precise diagnosis, assessment of the proper timing of surgical and interventional procedures, improved prosthetic and biologic valve replacements and repairs, recognition of postoperative complications and their management, and the introduction of minimally invasive approaches that have enabled definitive and durable treatment for patients who were previously considered inoperable. This review summarizes the current state of our understanding of the mechanisms of heart valve health and disease arrived at through innovative research on the cell and molecular biology of valves, clinical and pathological features of the most frequent intrinsic structural diseases that affect the valves, and the status and pathological considerations in the technological advances in valvular surgery and interventions. The contributions of many cardiovascular pathologists and other scientists, engineers, and clinicians are emphasized, and potentially fruitful areas for research are highlighted.

Studies suggest that cardiorespiratory dysfunction likely contributes to sudden unexpected death in epilepsy (SUDEP). Seizures result in autonomic and respiratory dysfunction, leading to sympathetic hyperactivity and respiratory distress, including apnea. While the heart is vulnerable to catecholamine surges and hypoxia, it remains unknown if repetitive generalized seizures lead to cardiac damage. DBA/1 mice exhibit seizure-induced respiratory arrest (S-IRA) following generalized audiogenic seizures (AGS), which can be resuscitated using a rodent ventilator. In the current study, we induced different numbers of S-IRA episodes in DBA/1 mice and determined the association of repeated S-IRA induction with cardiac damage using histology. After repetitive induction of 18 S-IRA, calcified lesions, as revealed by calcium (Ca2+)-specific alizarin red staining, were observed in the ventricular myocardium in 61.5% of DBA/1 mice, which was higher compared to mice with 5 S-IRA and 1 S-IRA as well as age-matched untested control mice. The incidence of lesions in mice with 9 S-IRA was only higher than that of control mice. Only 1–2, small lesions were observed in mice with 5 S-IRA and 1 S-IRA and in control mice. Larger lesions (> 2500 μm2) were observed in mice with 9 and 18 S-IRA. The incidence of larger lesions was higher in mice with 18 S-IRA (53.8%) as compared to mice with 5 S-IRA and 1 S-IRA as well as with control mice, and the incidence of larger lesions in mice with 9 S-IRA was only higher than that of control mice. Repeated induction of S-IRA in DBA/1 mice can result in calcified necrotic lesions in the ventricles of the heart, and their incidence and size are dependent on the total number of S-IRA.

Background Non-invasive monitoring of autologous vein graft (VG) bypass grafts is largely limited to detecting late luminal narrowing. Although magnetic resonance imaging (MRI) delineates vein graft intima, media, and adventitia, which may detect early failure, the scan time required to achieve sufficient resolution is at present impractical. Purpose To study VG visualization enhancement in vivo and delineate whether a covalently attached MRI contrast agent would enable quicker longitudinal imaging of the VG wall. Material and Methods Sixteen 12-week-old male C57BL/6J mice underwent carotid interposition vein grafting. The inferior vena cava of nine donor mice was treated with a gadolinium-diethylenetriaminepentaacetic acid (Gd-DTPA)-based contrast agent, with control VGs labeled with a vehicle. T1-weighted (T1W) MRI was performed serially at postoperative weeks 1, 4, 12, and 20. A portion of animals was sacrificed for histopathology following each imaging time point. Results MRI signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were significantly higher for treated VGs in the first three time points (1.73 × higher SNR, P = 0.0006, and 5.83 × higher CNR at the first time point, P = 0.0006). However, MRI signal enhancement decreased consistently in the study period, to 1.29 × higher SNR and 2.64 × higher CNR, by the final time point. There were no apparent differences in graft morphometric analyses in Masson’s trichrome-stained sections. Conclusion A MRI contrast agent that binds covalently to the VG wall provides significant increase in T1W MRI signal with no observed adverse effects in a mouse model. Further optimization of the contrast agent to enhance its durability is required.

Bicuspid aortic valve is the most prevalent cardiac valvular malformation. It is associated with a high rate of long-term morbidity including development of calcific aortic valve disease, aortic regurgitation and concomitant thoracic aortic aneurysm and dissection. Recently, basic and translational studies have identified some key processes involved in the development of bicuspid aortic valve and its morbidity. The development of aortic valve disease and thoracic aortic aneurysm and dissection is the result of complex interactions between genotypes, environmental risk factors and specific haemodynamic conditions created by bicuspid aortic valve anatomy. Herein, we review the pathobiology of bicuspid aortic valve with a special emphasis on translational aspects of these basic findings. Important but unresolved problems in the pathology of bicuspid aortic valve and thoracic aortic aneurysm and dissection are discussed, along with the molecular processes involved.

Background and Purpose— Recent symptoms stand as a major determinant of stroke risk in patients with carotid stenosis, likely reflective of atherosclerotic plaque destabilization. In view of emerging links between vascular and adipose biology, we hypothesized that human perivascular adipose characteristics associate with carotid disease symptom status. Methods— Clinical history, carotid plaques, blood, and subcutaneous and perivascular adipose tissues were prospectively collected from patients undergoing carotid endarterectomy. Nine adipose-associated biological mediators were assayed and compared in patients with symptomatic (n=15) versus asymptomatic (n=19) disease. Bonferroni correction was performed for multiple testing ( α /9=0.006). Results— Symptomatic patients had 1.9-fold higher perivascular adiponectin levels ( P =0.005). Other circulating, subcutaneous, and perivascular biomarkers, as well as microscopic plaque characteristics, did not differ between symptomatic and asymptomatic patients. Conclusions— Symptomatic and asymptomatic carotid endarterectomy patients display a tissue-specific difference in perivascular adipose adiponectin. This difference, which was not seen in plasma or subcutaneous compartments, supports a potential local paracrine relationship with vascular disease processes that may be related to stroke mechanisms.

Whether Barlow disease (BD) and fibroelastic deficiency (FED), the main causes of mitral valve prolapse (MVP), should be considered 2 distinct diseases remains unknown. Mitral valves from patients who required surgery for severe mitral regurgitation due to degenerative nonsyndromic MVP were analyzed. Intraoperative diagnosis of BD or FED was based on leaflet redundancy and thickness, number of segments involved, and annular dimension. The removed medial scallop of the posterior leaflet and attached chordae were used for histopathological and immunohistological assessment. Histologically, compared to normal controls (n = 3), BD (n = 14), and FED (n = 9) leaflets demonstrated an altered architecture and increased thickness. Leaflet thickness was greater and chordae thickness lower in BD than FED (P < 0.0001). In BD, increased thickness was owing to spongiosa expansion (proteoglycan accumulation) and intimal thickening on fibrosa and atrialis; in FED, local thickening was predominant on the fibrosa side, with accumulation of proteoglycan-like material around the chordae. Collagen accumulation was observed in FED leaflets and chords and decreased in BD. Fragmented elastin fibers were present in BD and FED; elastin decreased in BD but increased in FED leaflets and around chordae. Activated myofibroblasts accumulate in both diseased leaflets and chords, but more abundantly in FED chordae (P < 0.0001), independently of age, suggesting a role of these cells in chordal rupture. There were more CD34-positive cells in BD leaflets and in FED chordae (P < 0.01). In BD leaflets (but not chordae) proliferative Ki67-positive cells were more abundant (P < 0.01) and matrix metalloproteinase 2 levels were increased (P < 0.01) indicating tissue remodeling. Upregulation of transforming growth factor beta and pERK signaling pathways was evident in both diseases but more prominent in FED leaflets (continued on next page)(P < 0.001), with pERK upregulation in FED chordae (P < 0.0001). Most cellular and signaling markers were negligible in control valves. Quantitative immunohistopathological analyses demonstrated distinct changes between BD and FED valves: predominant matrix degradation in BD and increased profibrotic signaling pathways in FED, indicating that BD and FED are 2 different entities. These results may pave the way for genetic studies of MVP and development of preventive drug therapies.

The clinical and pathological features of the most frequent intrinsic structural diseases that affect the heart valves are well established, but heart valve disease mechanisms are poorly understood, and effective treatment options are evolving. Major advances in the understanding of the structure, function and biology of native valves and the pathobiology, biomaterials and biomedical engineering, and the clinical management of valvular heart disease have occurred over the past several decades. This communication reviews contemporary considerations relative to the pathology of valvular heart disease, including (1) clinical significance and epidemiology of valvular heart disease; (2) functional and dynamic valvular macro-, micro- and ultrastructure; (3) causes, morphology and mechanisms of human valvular heart disease; and (4) pathologic considerations in valve replacement, repair and, potentially, regeneration of the heart valves.

Background Ascending thoracic aortic aneurysm ( ATAA ) is driven by angiotensin II (Ang II ) and contributes to the development of left ventricular ( LV ) remodeling through aortoventricular coupling. We previously showed that locally available leptin augments Ang II ‐induced abdominal aortic aneurysms in apolipoprotein E–deficient mice. We hypothesized that locally synthesized leptin mediates Ang II ‐induced ATAA . Methods and Results Following demonstration of leptin synthesis in samples of human ATAA associated with different etiologies, we modeled in situ leptin expression in apolipoprotein E–deficient mice by applying exogenous leptin on the surface of the ascending aorta. This treatment resulted in local aortic stiffening and dilation, LV hypertrophy, and thickening of aortic/mitral valve leaflets. Similar results were obtained in an Ang II ‐infusion ATAA mouse model. To test the dependence of Ang II ‐induced aortic and LV remodeling on leptin activity, a leptin antagonist was applied to the ascending aorta in Ang II ‐infused mice. Locally applied single low‐dose leptin antagonist moderated Ang II ‐induced ascending aortic dilation and protected mice from ATAA rupture. Furthermore, LV hypertrophy was attenuated and thickening of aortic valve leaflets was moderated. Last, analysis of human aortic valve stenosis leaflets revealed de novo leptin synthesis, whereas exogenous leptin stimulated proliferation and promoted mineralization of human valve interstitial cells in culture. Conclusions Ang II ‐induced ATAA is mediated by locally synthesized leptin. Aortoventricular hemodynamic coupling drives LV hypertrophy and promotes early aortic valve lesions, possibly mediated by valvular in situ leptin synthesis. Clinical implementation of local leptin antagonist therapy may attenuate Ang II ‐induced ATAA and moderate related LV hypertrophy and pre–aortic valve stenosis lesions. Clinical Trial Registration URL : https://www.clinicaltrials.gov/ . Unique identifier: NCT 00449306.

Purpose Calcific aortic valve disease (CAVD) is the most prevalent valve disease in the Western world. Recent difficulty in translating experimental results on statins to beneficial clinical effects warrants the need for understanding the role of valvular interstitial cells (VICs) in CAVD. In two-dimensional culture conditions, VICs undergo spontaneous activation similar to pathological differentiation, which intrinsically limits the use of in vitro models to study CAVD. Here, we hypothesized that a three-dimensional (3D) culture system based on naturally derived extracellular matrix polymers, mimicking the microenvironment of native valve tissue, could serve as a physiologically relevant platform to study the osteogenic differentiation of VICs. Principal results Aortic VICs loaded into 3D hydrogel constructs maintained a quiescent phenotype, similar to healthy human valves. In contrast, osteogenic environment induced an initial myofibroblast differentiation (hallmarked by increased alpha smooth muscle actin [α-SMA] expression), followed by an osteoblastic differentiation, characterized by elevated Runx2 expression, and subsequent calcific nodule formation recapitulating CAVD conditions. Silencing of α-SMA under osteogenic conditions diminished VIC osteoblast-like differentiation and calcification, indicating that a VIC myofibroblast-like phenotype may precede osteogenic differentiation in CAVD. Major conclusions Using a 3D hydrogel model, we simulated events that occur during early CAVD in vivo and provided a platform to investigate mechanisms of CAVD. Differentiation of valvular interstitial cells to myofibroblasts was a key mechanistic step in the process of early mineralization. This novel approach can provide important insight into valve pathobiology and serve as a promising tool for drug screening.

This article provides the transcript for the Panel on Developing a Biomaterials Curriculum held at the 2011 annual meeting of the Society for Biomaterials in Orlando, FL. The panelists were Thomas R. Harris of Vanderbilt University, Jack Lemons of the University of Alabama, Birmingham, Antonios G. Mikos of Rice University, David A. Puleo on the University of Kentucky, Frederick J. Schoen of Harvard Medical School, and Johnna S. Temenoff of Georgia Tech/Emory. The panelists, each an expert in engineering education and textbook author, presented their perspectives on key issues of developing undergraduate and graduate curricula that contain a biomaterials focus. The presentations were followed by a lively and informative discussion with the audience. A redacted portion of this discussion is included.

Calcific aortic valve disease (CAVD) encompasses the range of disease from initial alterations in the cell biology of the leaflets to end-stage calcification resulting in left ventricular outflow obstruction. The first detectable macroscopic changes in the leaflets, seen as calcification, or focal leaflet thickening with normal valve function, is termed aortic valve sclerosis, but it is likely that the initiating events in the disease process occur much earlier. Disease progression is characterized by a process of thickening of the valve leaflets and the formation of calcium nodules—often including the formation of actual bone—and new blood vessels, which are concentrated near the aortic surface. End-stage disease, eg, calcific aortic stenosis, is characterized pathologically by large nodular calcific masses within the aortic cusps that protrude along the aortic surface into the sinuses of Valsalva, interfering with opening of the cusps. There is no disease along the ventricular surface. For decades, this disease was thought to be a passive process in which the valve degenerates with age in association with calcium accumulation. Moreover, although CAVD is more common with age, it is not an inevitable consequence of aging. Instead, CAVD appears to be an actively regulated disease process that cannot be characterized exclusively as senile or degenerative. The National Heart, Lung, and Blood Institute convened a group of scientists from different fields of study, including cardiac imaging, molecular biology, cardiovascular pathology, epidemiology, cell biology, endocrinology, bioengineering, and clinical outcomes, to review the scientific studies from the past decade in the field of CAVD. The purpose was to develop a consensus statement on the current state of translational research related to CAVD. Herein, we summarize recent scientific studies and define future directions for research to diagnose, treat, and potentially prevent this complex disease process. ### Key Structure-Function Correlations Heart valves permit unobstructed, unidirectional forward flow through the circulation. …

Background One of the most important factors responsible for the calcific failure of bioprosthetic heart valves is glutaraldehyde crosslinking. Ethanol (EtOH) incubation after glutaraldehyde crosslinking has previously been reported to confer anticalcification efficacy for bioprostheses. The present studies investigated the anticalcification efficacy in vivo of the novel crosslinking agent, triglycidyl amine (TGA), with or without EtOH incubation, in comparison with glutaraldehyde. Methods The TGA crosslinking (± EtOH) was used to prepare porcine aortic valves for both rat subdermal implants and sheep mitral valve replacements, for comparisons with glutaraldehyde-fixed controls. Thermal denaturation temperature, an index of crosslinking, cholesterol extraction, and hydrodynamic properties were quantified. Explant endpoints included quantitative and morphologic assessment of calcification. Results Thermal denaturation temperatures after TGA were intermediate between unfixed and glutaraldehyde-fixed. EtOH incubation resulted in almost complete extraction of cholesterol from TGA or glutaraldehyde-fixed cusps. Rat subdermal explants (90 days) demonstrated that TGA-EtOH resulted in a significantly greater level of inhibition of calcification than other conditions. Thus, TGA-ethanol stent mounted porcine aortic valve bioprostheses were fabricated for comparisons with glutaraldehyde-pretreated controls. In hydrodynamic studies, TGA-EtOH bioprostheses had lower pressure gradients than glutaraldehyde-fixed. The TGA-ethanol bioprostheses used as mitral valve replacements in juvenile sheep (150 days) demonstrated significantly lower calcium levels in both explanted porcine aortic cusp and aortic wall samples compared with glutaraldehyde-fixed controls. However, TGA-EtOH sheep explants also demonstrated isolated calcific nodules and intracuspal hematomas. Conclusions The TGA-EtOH pretreatment of porcine aortic valves confers significant calcification resistance in both rat subdermal and sheep circulatory implants, but with associated structural instability.

This review summarizes several areas relative to the pathology of heart valve disease in which there has been rapid and ongoing evolution, namely, our understanding of: (a) the dynamic functional biology of cardiac valves; and (b) the pathology/pathobiology of valvular heart diseases; (c) new developments in valve repair and substitution using percutaneous approaches; and (d) progress toward the exciting potential of therapeutic valvular tissue engineering and regeneration, including the challenges that will need to be overcome before such therapeutic advances can become clinically useful.

Cardiovascular pathology is a subspecialty of anatomic pathology that requires both clinical education and expertise in contemporary physiopathology. The Society for Cardiovascular Pathology sponsored a special workshop within the frame of the USCAP Annual Meeting, held in Vancouver, March 6–12, 2004, to address the present and future role of cardiovascular pathology in research, clinical care, and education. Clearly, the recruitment and training of young pathologists are crucial to this aim. The forum tried to answer a series of questions. First, is there room for cardiovascular pathologists and clinicopathologic correlations in the era of extraordinary advances of in vivo human body imaging? What is the evolving role of the autopsy? How can the cardiovascular pathologist simultaneously be an autopsy prosector, a surgical pathologist, a molecular pathologist, and an experimental pathologist? Is there a specific domain content for training in cardiovascular pathology and does it meet the constellation of market needs and demands? What are the experiences in Europe, North America and elsewhere? What is the influence of cardiovascular pathology in departments of pathology? Is the subdiscipline still a Cinderella in the anatomic theatre or a Princess with a double helix coat of arms? The Society for Cardiovascular Pathology is strongly committed to optimizing the academic and professional profile of the future generation of cardiovascular pathologists. This article reports the outcome of the forum and directions that may lead to a vibrant future for well-trained cardiovascular pathologists.

Background— Development and validation of novel imaging modalities to assess the composition of human atherosclerotic plaques will improve the understanding of atheroma evolution and could facilitate evaluation of therapeutic strategies for plaque modification. Surface MRI can characterize tissue content of carotid but not deeper arteries. This study evaluated the usefulness of intravascular MRI (IVMRI) to discern the composition of human iliac arteries in vivo. Methods and Results— Initial studies validated IVMRI against histopathology of human atherosclerotic arteries ex vivo. A 0.030-inch-diameter IVMRI detector coil was advanced into isolated human aortoiliac arteries and coupled to a 1.5-T scanner. Information from combined T1-, moderate T2-, and proton-density–weighted images differentiated lipid, fibrous, and calcified components with favorable sensitivity and specificity and allowed accurate quantification of plaque size. The validated approach was then applied to image iliac arteries of 25 human subjects in vivo, and results were compared with those of intravascular ultrasound (IVUS). IVMRI readily visualized inner and outer plaque boundaries in all arteries, even those with extensive calcification that precluded IVUS interpretation. It also revealed the expected heterogeneity of atherosclerotic plaque content that was noted during ex vivo validation. Again, IVUS did not disclose this heterogeneity. The level of interobserver and intraobserver agreement in the interpretation of plaque composition was high for IVMRI but poor for IVUS. Conclusions— IVMRI can reliably identify plaque composition and size in arteries deep within the body. Identification of plaque components by IVMRI in vivo has important implications for the understanding and modification of human atherosclerosis.

We summarize herein selected contributions over the past several decades by pathologists and others to the diagnosis, understanding, and management of valvular heart disease, including the structural basis of valve function, the pathology/pathobiology of common naturally occurring and iatrogenic lesions, developments in valve substitution, and novel approaches to valve repair, replacement, and regeneration.

Background— An estimated 275 000 patients undergo heart valve replacement each year. However, existing solutions for valve replacement are complicated by the morbidity associated with lifelong anticoagulation of mechanical valves and the limited durability of bioprostheses. Recent advances in tissue engineering and our understanding of stem cell biology may provide a lifelong solution to these problems. Methods and Results— Mesenchymal stem cells were isolated from ovine bone marrow and characterized by their morphology and antigen expression through immunocytochemistry, flow cytometry, and capacity to differentiate into multiple cell lineages. A biodegradable scaffold was developed and characterized by its tensile strength and stiffness as a function of time in cell-conditioned medium. Autologous semilunar heart valves were then created in vitro using mesenchymal stem cells and the biodegradable scaffold and were implanted into the pulmonary position of sheep on cardiopulmonary bypass. The valves were evaluated by echocardiography at implantation and after 4 months in vivo. Valves were explanted at 4 and 8 months and examined by histology and immunohistochemistry. Valves displayed a maximum instantaneous gradient of 17.2±1.33 mm Hg, a mean gradient of 9.7±1.3 mm Hg, an effective orifice area of 1.35±0.17 cm 2 , and trivial or mild regurgitation at implantation. Gradients changed little over 4 months of follow-up. Histology showed disposition of extracellular matrix and distribution of cell phenotypes in the engineered valves reminiscent of that in native pulmonary valves. Conclusions— Stem-cell tissue-engineered heart valves can be created from mesenchymal stem cells in combination with a biodegradable scaffold and function satisfactorily in vivo for periods of >4 months. Furthermore, such valves undergo extensive remodeling in vivo to resemble native heart valves.

Heart valve disease is a significant medical problem worldwide. Current treatment for heart valve disease is heart valve replacement. State of the art replacement heart valves are less than ideal and are associated with significant complications. Using the basic principles of tissue engineering, promising alternatives to current replacement heart valves are being developed. Significant progress has been made in the development of a tissue-engineered semilunar heart valve substitute. Advancements include the development of different potential cell sources and cell-seeding techniques; advancements in matrix and scaffold development and in polymer chemistry fabrication; and the development of a variety of bioreactors, which are biomimetic devices used to modulate the development of tissue-engineered neotissue in vitro through the application of biochemical and biomechanical stimuli. This review addresses the need for a tissue-engineered alternative to the current heart valve replacement options. The basics of heart valve structure and function, heart valve disease, and currently available heart valve replacements are discussed. The last 10 years of investigation into a tissue-engineered heart valve as well as current developments are reviewed. Finally, the early clinical applications of cardiovascular tissue engineering are presented.

ObjectiveWe studied the pathologic features, cellular phenotypes, and matrix remodeling of clinical pulmonary-to-aortic valve transplants functioning up to 6 years.MethodsNine autografts and associated vascular walls early (2-10 weeks) and late (3-6 years) postoperatively were examined by using routine morphologic methods and immunohistochemistry. In 4 cases autograft and homograft cusps were obtained from the same patients.ResultsAutografts had near-normal trilaminar cuspal structure and collagen architecture and viable valvular interstitial and endothelial cells throughout the time course. In contrast, cusps of homografts used to replace the pulmonary valves in the same patients were devitalized. In early autograft explants, 19.3% ± 2.4% of cuspal interstitial cells were myofibroblasts expressing α-actin. In contrast, myofibroblasts comprised only 6.0% ± 1.1% of cells in late explants and 2.5% ± 0.4% and 4.6% ± 0.8% of cells in normal pulmonary and aortic valves, respectively (P < .05). In early autografts only 12.0% ± 4.6% of endothelial cells expressed the systemic arterial endothelial cell marker EphrinB2, whereas later explants had 85.6% ± 5.4% of endothelial cells expressing EphrinB2 (P < .05). In early autografts 43.8% ± 8.8% of interstitial cells expressed metalloproteinase 13, whereas late autografts had 11.4% ± 2.7% of interstitial cells expressing matrix metalloproteinase 13 (P < .05). Collagen content in autografts was comparable with that of normal valves and was higher than that seen in homograft valves (P < .005). However, autograft walls were damaged, with granulation tissue (early) and scarring, with focal loss of normal smooth muscle cells, elastin, and collagen (late).ConclusionsThe structure of pulmonary valves transplanted to the systemic circulation evolved toward that of normal aortic valves. Key processes in this remodeling included onset of a systemic endothelial cell phenotype and reversible plasticity of fibroblast-like valvular interstitial cells to myofibroblasts.

Protein kinase C (PKC) beta isoform activity is increased in myocardium of diabetic rodents and heart failure patients. Transgenic mice overexpressing PKCbeta2 (PKCbeta2Tg) in the myocardium exhibit cardiomyopathy and cardiac fibrosis. In this study, we characterized the expression of connective tissue growth factor (CTGF) and transforming growth factor beta (TGFbeta) with the development of fibrosis in heart from PKCbeta2Tg mice at 4-16 weeks of age. Heart-to-body weight ratios of transgenic mice increased at 8 and 12 weeks, indicating hypertrophy, and ratios did not differ at 16 weeks. Collagen VI and fibronectin mRNA expression increased in PKCbeta2Tg hearts at 4-12 weeks. Histological examination revealed myocyte hypertrophy and fibrosis in 4- to 16-week PKCbeta2Tg hearts. CTGF expression increased in PKCbeta2Tg hearts at all ages, whereas TGFbeta increased only at 8 and 12 weeks. In 8-week diabetic mouse heart, CTGF and TGFbeta expression increased two- and fourfold, respectively. Similarly, CTGF expression increased in rat hearts at 2-8 weeks of diabetes. This is the first report of increased CTGF expression in myocardium of diabetic rodents suggesting that cardiac injury associated with PKCbeta2 activation, diabetes, or heart failure is marked by increased CTGF expression. CTGF could act independently or together with other cytokines to induce cardiac fibrosis and dysfunction.

The global impact of the spectrum of valvular heart diseases is a serious but under-recognized health problem. While the prevalence of rheumatic heart disease has declined in the developed countries, calcific and degenerative valve disease is on the rise due to population aging. No medical therapies exist to prevent or slow this disease progression, and invasive and costly surgical interventions are the only effective treatments. In the last two decades significant efforts have been made in elucidating the cellular pathobiology, development, and biomechanics of heart valves, and new understanding of the developmental pathways underlying molecular and cellular mechanisms of calcific and degenerative valve disorders has emerged. In addition, the use of novel imaging methods and animal models has provided better appreciation of key events occurring in vivo. This chapter will integrate our current knowledge of cellular and molecular pathways and biomechanical factors involved in the initiation and progression of calcific aortic valve disease and mitral valve degeneration in humans.

Background . Tissue engineering is a new approach, whereby techniques are being developed to transplant autologous cells onto biodegradable scaffolds to ultimately form new functional tissue in vitro and in vivo. Our laboratory has focused on the tissue engineering of heart valves, and we have fabricated a trileaflet heart valve scaffold from a biodegradable polymer, a polyhydroxyalkanoate. In this experiment we evaluated the suitability of this scaffold material as well as in vitro conditioning to create viable tissue for tissue engineering of a trileaflet heart valve. Methods . We constructed a biodegradable and biocompatible trileaflet heart valve scaffold from a porous polyhydroxyalkanoate (Meatabolix Inc, Cambridge, MA). The scaffold consisted of a cylindrical stent (1 × 15 × 20 mm inner diameter) and leaflets (0.3 mm thick), which were attached to the stent by thermal processing techniques. The porous heart valve scaffold (pore size 100 to 240 μm) was seeded with vascular cells grown and expanded from an ovine carotid artery and placed into a pulsatile flow bioreactor for 1, 4, and 8 days. Analysis of the engineered tissue included biochemical examination, enviromental scanning electron microscopy, and histology. Results . It was possible to create a trileaflet heart valve scaffold from polyhydroxyalkanoate, which opened and closed synchronously in a pulsatile flow bioreactor. The cells grew into the pores and formed a confluent layer after incubation and pulsatile flow exposure. The cells were mostly viable and formed connective tissue between the inside and the outside of the porous heart valve scaffold. Additionally, we demonstrated cell proliferation (DNA assay) and the capacity to generate collagen as measured by hydroxyproline assay and movat-stained glycosaminoglycans under in vitro pulsatile flow conditions. Conclusions . Polyhydroxyalkanoates can be used to fabricate a porous, biodegradable heart valve scaffold. The cells appear to be viable and extracellular matrix formation was induced after pulsatile flow exposure.

Objective: Bioprosthetic and mechanical valves and valved conduits are unable to grow, repair, or remodel. In an attempt to overcome these shortcomings, we have evaluated the feasibility of creating 3-leaflet, valved, pulmonary conduits from autologous ovine vascular cells and biodegradable polymers with tissue-engineering techniques. Methods: Endothelial cells and vascular medial cells were harvested from ovine carotid arteries. Composite scaffolds of polyglycolic acid and polyhydroxyoctanoates were formed into a conduit, and 3 leaflets (polyhydroxyoctanoates) were sewn into the conduit. These constructs were seeded with autologous medial cells on 4 consecutive days and coated once with autologous endothelial cells. Thirty-one days (±3 days) after cell harvesting, 8 seeded and 1 unseeded control constructs were implanted to replace the pulmonary valve and main pulmonary artery on cardiopulmonary bypass. No postoperative anticoagulation was given. Valve function was assessed by means of echocardiography. The constructs were explanted after 1, 2, 4, 6, 8, 12, 16, and 24 weeks and evaluated macroscopically, histologically, and biochemically. Results: Postoperative echocardiography of the seeded constructs demonstrated no thrombus formation with mild, nonprogressive, valvular regurgitation up to 24 weeks after implantation. Histologic examination showed organized and viable tissue without thrombus. Biochemical assays revealed increasing cellular and extracellular matrix contents. The unseeded construct developed thrombus formation on all 3 leaflets after 4 weeks. Conclusion: This experimental study showed that valved conduits constructed from autologous cells and biodegradable matrix can function in the pulmonary circulation. The progressive cellular and extracellular matrix formation indicates that the remodeling of the tissue-engineered structure continues for at least 6 months. (J Thorac Cardiovasc Surg 2000;119:732-40)

Microwave Ablation of Canine Ventricle. Introduction: Radiofrequency current delivered during cardiac ablation is limited by a rise in impedance secondary to coagulum formation on the ablation electrode. Microwave antennas continue to deliver energy despite the presence of coagulum; thus, temperature control of the ablation electrode may be even more important for microwave than for radiofrequency ablations to avoid thromboembolic risks. The purpose of this study was to test the safety and efficacy of an ablation system utilizing a feedback control system to maintain a fixed target temperature for creating lesions with multiple applications of microwave energy. Methods and Resutts: Microwave ablation was assessed using an 8.5-French catheter at 2 to 4 sites in 11 dogs. Microwave energy delivery was performed for 60 seconds three times at the same site. Power was regulated using a feedback control mechanism to maintain a target temperature of 75°C. Ambulatory ECG monitoring was performed before and after ablation to assess arrhythmia occurrence. After follow-up, the dogs were euthanized, and lesion dimensions measured after fixation. The mean power appllied to achieve the target temperature of 75°C was 9.3 ± 44 W. The mean depth of the lesions was 8.8 ± 4.2 mm. Tbe mean volume of the lesions was 304 ± 240 mm3. Forty-four percent of the lesions were transmural. No endocardial thrombus was found. Ventricular tachycardia was observed acutely but resolved after 1 week. Conclusion: Temperature feedback control systems for microwave ablation using a temperature-controlled system is feasible for myocardial ablation and creates uniform and large lesions; however, such large lesions can be acutely proarrbythmic.

Substitute heart valves composed of human or animal tissues have been used since the early 1960s, when aortic valves obtained fresh from human cadavers were transplanted to other individuals as allografts. Today, tissue valves are used in 40% or more of valve replacements worldwide, predominantly as stented porcine aortic valves (PAV) and bovine pericardial valves (BPV) preserved by glutaraldehyde (GLUT) (collectively termed bioprostheses). The principal disadvantage of tissue valves is progressive calcific and noncalcific deterioration, limiting durability. Native heart valves (typified by the aortic valve) are cellular and layered, with regional specializations of the extracellular matrix (ECM). These elements facilitate marked repetitive changes in shape and dimension throughout the cardiac cycle, effective stress transfer to the adjacent aortic wall, and ongoing repair of injury incurred during normal function. Although GLUT bioprostheses mimic natural aortic valve structure (a) their cells are nonviable and thereby incapable of normal turnover or remodeling ECM proteins; (b) their cuspal microstructure is locked into a configuration which is at best characteristic of one phase of the cardiac cycle (usually diastole); and (c) their mechanical properties are markedly different from those of natural aortic valve cusps. Consequently, tissue valves suffer a high rate of progressive and age-dependent structural valve deterioration resulting in stenosis or regurgitation (>50% of PAV overall fail within 10-15 years; the failure rate is nearly 100% in 5 years in those 65). Two distinct processes-intrinsic calcification and noncalcific degradation of the ECM-account for structural valve deterioration. Calcification is a direct consequence of the inability of the nonviable cells of the GLUT-preserved tissue to maintain normally low intracellular calcium. Consequently, nucleation of calcium-phosphate crystals occurs at the phospholipid-rich membranes and their remnants. Collagen and elastin also calcify. Tissue valve mineralization has complex host, implant, and mechanical determinants. Noncalcific degradation in the absence of physiological repair mechanisms of the valvular structural matrix is increasingly being appreciated as a critical yet independent mechanism of valve deterioration. These degradation mechanisms are largely rationalized on the basis of the changes to natural valves when they are fabricated into a tissue valve (mentioned above), and the subsequent interactions with the physiologic environment that are induced following implantation. The "Holy Grail" is a nonobstructive, nonthrombogenic tissue valve which will last the lifetime of the patient (and potentially grow in maturing recipients). There is considerable activity in basic research, industrial development, and clinical investigation to improve tissue valves. Particularly exciting in concept, yet early in practice is tissue engineering, a technique in which an anatomically appropriate construct containing cells seeded on a resorbable scaffold is fabricated in vitro, then implanted. Remodeling in vivo, stimulated and guided by appropriate biological signals incorporated into the construct, is intended to recapitulate normal functional architecture.

Thrombotic thrombocytopenic purpura (TTP) is an uncommon syndrome resulting from diffuse occlusion of small arterioles and capillaries by hyaline microthrombi. It is characterized by fever, thrombocytopenic purpura, microangiopathic hemolytic anemia, and neurologic and renal dysfunction. While cardiac pathology in TTP is commonly seen at autopsy, clinical cardiac dysfunction is rare and typically results from conduction system involvement. While 3% to 8% of patients with TTP report chest pain on admission, reports of fatal ventricular pump failure are extremely rare. We now report a case of TTP resulting in death from widespread myocardial necrosis. This patient presented with elevated cardiac enzymes and electrocardiographic disturbances that mimicked viral myocarditis, as well as a profound thrombocytopenia. Such a case may represent the extreme of a distribution of cardiac involvement in TTP or the consequence of an unidentified autoimmune process capable of precipitating severe myocardial TTP.

Objective: We sought to determine the morphology, mechanisms of deterioration, cellular viability, extracellular matrix integrity, and the role of immune responses in the dysfunction of cryopreserved aortic and pulmonic valve allografts. Methods: We studied 33 explanted left-sided ( n = 20) or right-sided ( n = 13) cryopreserved human allograft heart valves explanted several hours to 9 years after operation, 14 nonimplanted allografts, and 16 aortic valves removed from transplanted allograft hearts 2 days to 4 years after operation. Analysis included gross inspection, radiography, light microscopy, electron microscopy, and immunohistochemical studies. Results: Allografts implanted for more than 1 day had progressive collagen hyalinization and loss of normal structural complexity and cellularity, including endothelium and deep connective tissue cells. Inflammatory cells were generally minimal or absent in the allografts. Transmission electron microscopy of long-term cryopreserved allograft valves revealed no viable cells, focal calcification centered around dead cell remnants, and distorted but preserved collagen. In contrast, aortic valves from transplanted hearts showed remarkable structural preservation, including endothelium and abundant deep connective tissue cells; inflammatory infiltrates were generally mild and of no apparent deleterious consequence, including valves from patients who died of fatal rejection. Conclusions: Cryopreserved allografts are morphologically nonviable; their collagen is flattened but largely preserved. They are unlikely to grow, remodel, or exhibit active metabolic functions, and their usual degeneration cannot be attributed to immunologic responses. In contrast, aortic valves of transplanted hearts maintain near-normal overall architecture and cellularity and do not show apparent immunologic injury, even in the setting of fatal myocardial parenchymal rejection or graft arteriosclerosis. (J Thorac Cardiovasc Surg 1998;115:118-27)

Background: Surgical procedures using the latissimus dorsi (LD) muscle to assist chronic heart failure inflict major trauma on severely sick patients. A less invasive approach may prove beneficial. The aim of this article is to review our clinical and experimental approaches of dynamic aortomyoplasty (AMP) and emphasize the necessity to reorient surgical technique towards new directions and a less invasive thoracoscopic approach. Materials and Methods: A clinical pilot study on dynamic descending AMP started in June 1995 and included four patients. Two of them could benefit from LD counterpulsation, surviving 6 months and 18 months. Following this clinical experience, we investigated, on an animal model, minimally invasive thoracoscopic surgery for this procedure. Twelve goats underwent endoscopic LD harvest and video-assisted aortic wrap, and were studied after surgical recovery from an anatomical and functional standpoint. Results: Clinical AMP using open techniques provided extraaortic counterpulsation in NYHA Class IV patients contraindicated for other surgical therapies. However, surgical technique and strategy needed improvements for optimal cardiac assistance and better patient outcome. Minimally invasive thoracoscopic surgery was feasible and reproducible in goats, achieving improved anatomy and physiology as compared to the open technique in humans. When appropriate the wrapping technique and stimulation protocol were used, an optimal counterpulsation was demonstrated. We concluded that thoracoscopic AMP may provide a minimally invasive approach to cardiac assistance and thus, a new surgical option for patients presenting with chronic heart failure. (J Card Surg 1998;13:60–69)

In this study, we examined separately calcification of cusps (C) and associated aortic wall (AW) of 38 (13 aortic and 25 mitral) porcine bioprosthetic heart valves explanted from 37 patients (ages 25-80 years, mean 59) for structural dysfunction, following 54-210 months (mean 125 months aortic, 119 months mitral). Valves were sectioned into C and corresponding AW components; calcification was assessed by atomic absorption spectroscopy for calcium and histologic examination. Overall, AW calcification was half that of C (33.3 +/- 5.4 vs. 65.9 +/- 6.3 microg/mg, mean +/- standard error of the mean respectively, p = 0.002). Correlation of calcification in individual C/AW pairs was weak (r2 = 0.34). Calcification in C was nodular, largely in the valve fibrosa, but AW calcification predominated in the cells between elastic lamellae; large nodules were sparse. We conclude that since AW calcification in these failed porcine valves was neither prominent nor clinically significant, this process should rarely if ever be a limiting factor in the function of stented porcine valves, and that development of anticalcification therapies directed toward the AW of stented valves should be of low priority. However, in stent-free valves, the AW is not covered by prosthetic material, and the level of calcification could be greater and more likely to cause clinical problems through stiffening, embolism, and/or protrusion into the lumen of calcific masses.

Background Calcification of the cusps of bioprosthetic heart valves fabricated from either glutaraldehyde cross-linked porcine aortic valves or bovine pericardium frequently causes the clinical failure of these devices. Our investigations studied ethanol pretreatment of glutaraldehyde cross-linked porcine aortic valves as a new approach to prevent cuspal calcification. The hypothesis governing this approach holds that ethanol pretreatment inhibits calcification resulting from protein structural alterations and lipid extraction. Methods and Results Results demonstrated complete inhibition of calcification of glutaraldehyde-pretreated porcine bioprosthetic aortic valve cusps by 80.0% ethanol in rat subdermal implants (60-day ethanol-pretreated calcium level, 1.87±0.29 μg/mg tissue compared with control calcium level, 236.00±6.10 μg/mg tissue) and in sheep mitral valve replacements (ethanol-pretreated calcium level, 5.22±2.94 μg/mg tissue; control calcium level, 32.50±11.50 μg/mg tissue). The mechanism of ethanol inhibition may be explained by several observations: ethanol pretreatment resulted in an irreversible alteration in the amide I band noted in the infrared spectra for both purified type I collagen and glutaraldehyde cross-linked porcine aortic leaflets. Ethanol pretreatment also resulted in nearly complete extraction of leaflet cholesterol and phospholipid. Conclusions Ethanol pretreatment of glutaraldehyde cross-linked porcine aortic valve bioprostheses represents a highly efficacious and mechanistically based approach and may prevent calcific bioprosthetic heart valve failure.

Calcific aortic valve disease of the elderly is the most prevalent hemodynamically-significant valvular disease, and the most common lesion requiring valve replacement in industrialized countries. Transcatheter aortic valve implantation is a less invasive alternative to classical aortic valve replacement that can provide a therapeutic option for high-risk or inoperable patients with aortic stenosis. These devices must be biocompatible, have excellent hemodynamic performance, be easy to insert, be securely anchored without sutures, and be durable, without increased risk of thrombosis or infection. To date, complications are related to the site of entry for insertion, the site of implantation (aorta, coronary ostia, base of left ventricle), and to the structure and design of the inserted device. However, as with any novel technology unanticipated complications will develop. Goals for future development will be to make the devices more effective, more durable, safer, and easier to implant, so as to further improve outcome for patients with severe aortic stenosis. The pathologist participating in research and development, and examination of excised devices will have a critical role in improving outcome for these patients.

The aortic valve is highly responsive to cyclical and continuous mechanical forces, at the macroscopic and cellular levels. In this report, we delineate mechanokinetics (effects of mechanical inputs on the cells) and mechanodynamics (effects of cells and pathologic processes on the mechanics) of the aortic valve, with a particular focus on how mechanical inputs synergize with the inflammatory cytokine and other biomolecular signaling to contribute to the process of aortic valve calcification.

Calcification of biomaterial implants is an important pathologic process affecting a variety of tissue-derived biomaterials, as well as synthetic polymers in various functional configurations. The pathophysiology has been partially characterized with a number of useful animal models; a key common feature is the involvement of devitalized cells and cellular debris. Clinically useful preventive approaches based on either modifying biomaterials or local drug administration appears to be promising in some contexts.

Complications of biomaterials and medical devices are largely a consequence of biomaterial–tissue interactions, which all implants have with the environment into which they are placed. Most implants serve their recipients well for extended periods by alleviating the conditions for which they were implanted. Several key concepts of biomaterials–tissue interactions are emphasized in this chapter.