Search

Application of the method of removal of space debris objects by an ion beam - the IBS method - seems to be the most effective for cleaning the GEO region. This is due to the low energy consumption for transfer one object in a safe orbit delta-V≃11 m/s and the possibility of removal several objects by one spacecraft. The service spacecraft for this purpose can be developed on the basis of telsat technology, taking into account its functions. Such a spacecraft should contain an ion beam injector to act on the removed object and an electric propulsion system, which serves to compensate for the ion injector thrust and to control the spacecraft motion both during transportation of the removed object and during interorbital flights. The development of a weakly diverging ion beam injector, determination of the composition and structure of an electric propulsion system, ballistics of the optimal sequence of interorbital flights, and development of an algorithm for controlling a virtual cluster: spacecraft-removed object are discussed in the article. In the majority of works on IBS, commercial ion thrusters are considered as an ion injector and engines. However, ion beams from ion thrusters have a half angle of divergence of 120-150. When propagating in outer space, the ion beam expands irresistibly due to electron thermal effects. As a result, the distance at which the spacecraft must follow the removed object during its transportation for effective impulse transmission to it should be small (estimated, about 7 m). Taking into account the dimensions of both objects and the uncontrolled movement of the removed object relative to its center of mass, the object transportation operation carries noticeable risks. The results of an experimental study of a prototype of an ion injector with an initial half angle of divergence of 20-40 are presented. The use of such an injector would provide a distance between objects of 15–20 m and reduce the risk of their collision. In connection with IBS, various aspects of spacecraft control during transportation of an object with one, two or more engines as part of the electric propulsion system are considered. In the conceptual design of the spacecraft presented in this work, the electric propulsion system contains two stationary plasma thrusters, each of which is mounted with the possibility of independent rotation respect to two mutually perpendicular directions. Spacecraft motion control, including thrust vector control, is carried out by means of the thrusters coordinated rotation. The characteristics of the spacecraft and its subsystems intended for the removal of several objects are conceptually considered. For example, parameters of the mission for the removal of up to 10 objects from the NORAD catalog from the GEO region are given. In the future, using the result obtained, the control of SC of this scheme when IBS implementing in the low-Earth orbit will be considered.

A chronological synopsis of the history of the technology used in experimental and testing work relating to artillery pieces is presented. The period covered is from the mid-seventeenth century up ...

The meteorological data profiles are used in various strategic applications including Military Ballistics, Weather Forecasting, Boundary Layer Research and Climate Studies. The recorded data are ac...

This paper proposes a cost-effective, compact, noncontacting optoelectronic targeting system for measuring the distribution of projectile motion. The major elements of this system include a light emitting diode (LED) array, photodiode detecting array, double-layered aperture arrays, adaptive threshold circuit, and date acquisition. Through cooperating with double-layered aperture arrays, the system effectively reduces the radiation width of the light source to the photodiode detecting surface, and filters out the influence of incident light from the adjacent apertures on both sides above each photodiode to the corresponding photodiode detecting surface. It realizes that the response of the photodiode array corresponds to the coordinates of the light screen one by one. Through the sensitivity analysis of the light screen of the system, the system detecting threshold when the projectile passes through the light screen is calculated, and the corresponding adaptive threshold circuit is designed to prevent misjudgment when the system works. The measuring error of the system can reach &plusmn, 2 mm by experimental verification. Compared with other projectile&rsquo, s distribution measuring systems, the proposed system has the advantages of having high precision, convenient debugging, is nondestructive, and is a noncontact system.

A mathematical model is developed to characterize the progressive time-evolution of a fragmenting incandescent object. The objective of these models is to provide a spatio-thermal footprint of the fragmentation field, which can be useful to guide fire safety rules in manufacturing workplaces, as well as to estimate fire hazards. Ascertaining the time-evolution of the temperature of the fragments is quite difficult to measure experimentally, which motivates the model development. Initially, analytical models based solely on ballistics, which provide qualitative trends, are developed to provide insight into the fundamental ratios that govern safe operating conditions. Thereafter, rapid numerical spatio-thermal models, which provide quantitative information, are then developed, based on particle methods. The model uses the released energy from the initial blast pulse to provide the starting kinetic energy of the system of particles and then numerically computes the trajectory and thermal state of the fragments under the influence of Numerical examples and provided and extensions to high-fidelity are discussed.

The French-German Research Institute of Saint Louis proposed an innovative concept of a microair vehicle (MAV). The gun-launched MAV (GLMAV) is a new and original type of discreet and robust miniature hybrid system of about 1 kg for a very quick observation mission by air. The GLMAV in a projectile configuration is launched by a portable dedicated tube weighing less than 10 kg. After a ballistic flight, the GLMAV is transformed into a miniature drone with automatic deployment of coaxial counter-rotating rotors. The GLMAV in drone configuration is slowed down to be able to execute hovering or/and maneuvering flights. In few seconds, aerial observation down and forward can begin in order to capture information, because it is equipped with an embarked vision system with real-time image transmission. This paper is first focused on the conception of the launcher and of the platform in order to incorporate all the features coming from multiple disciplines. This hybrid system conception is linked to an iterative process between all fields of research such as aerodynamics, interior and exterior ballistics, mechanics, electronics, optronics and signal transmission, guidance, navigation, and control. All theoretical studies presented in this paper have then converged toward the manufacturing of the dedicated ballistic launcher and of the GLMAV platform. The latter is now ready for the autopilot implementation in the near future.

This study evaluates and compares the accuracies of five different ballistic models in predicting the speed profile of a supersonic bullet using radar measured speed data for 36 types of bullets. Each of the five ballistic models is parameterised by a ballistic constant and the muzzle speed of the bullet. In practice, each of these two parameters spans a wide range of values because of the large number of different bullet types that are available for use in a variety of applications. For a given bullet type, the bullet's ballistic constant and muzzle speed are determined by fitting the ballistic model to the data in a least-squares (LS) sense, and the root-mean-square (RMS) and maximum absolute (MA) deviations of the LS fit of the model from the data are computed. The best ballistic model (out of the five) is the one that has the smallest RMS and MA errors for the maximum number of bullet types. This ballistic model has been applied to accurate ranging of small arms fire using a single sensor node, with and without a priori knowledge of the model parameters, and its effectiveness for both cases is demonstrated using real data recorded from a field experiment.

As part of a research program, it was desired to better understand the impact of the rotating chamber alignment with the barrel throat on the precision and accuracy of a novel cased telescoped (CT) ammunition firing rifle. In order to perform the study, a baseline CT ammunition chamber which was concentric with a Mann barrel bore was manufactured. Additionally, six chambers were manufactured with an offset relative to the barrel bore. These chambers were used to simulate a misaligned chamber relative to the bore axis. Precision and accuracy tests were then performed at 200 m in an indoor range under controlled conditions. For this project, 5.56 mm CT ammunition was used. As the chamber axis offset relative to the gun bore was increased, the mean point of impact was displaced away from the target center. The shift in the impact location is explained by the presence of in-bore yaw which results in lateral throw-off and aerodynamic jump components. The linear theory of ballistics is used to establish a relationship between the chamber misalignment and the resulting projectile mean point of impact for a rifle developed to fire CT ammunition. This relationship allows for the prediction of the mean point of impact given a chamber misalignment.

A laboratory gun that uses compressed gas as its propellant was designed and tested for the study of small projectiles traveling in soils with initial velocities ranging from 50 to 200 m/s. The gun employed the use of air or helium with an electrically triggered, pneumatically piloted, solenoid valve. The triggering system was designed to provide remote activation. A photo gate speedometer was utilized to measure the exit velocity of each projectile. Details of the electro-pneumatic control system are presented in this paper along with the design of the gun assembly and its subsystems. The effects of different design parameters, including muzzle length, projectile mass, propellant type, and volume of compressed gas utilized, on projectile velocity were investigated. Statistical analysis of the gun performance is presented. The gun is currently being used to visualize the fundamental physics of rapid earth penetration in soils, using transparent soils.

Instead of the capillary plasma generator (CPG), a discharge rod plasma generator (DRPG) is used in the 30 mm electrothermal-chemical (ETC) gun to improve the ignition uniformity of the solid propellant. An axisymmetric two-dimensional interior ballistics model of the solid propellant ETC gun (2D-IB-SPETCG) is presented to describe the process of the ETC launch. Both calculated pressure and projectile muzzle velocity accord well with the experimental results. The feasibility of the 2D-IB-SPETCG model is proved. Depending on the experimental data and initial parameters, detailed distribution of the ballistics parameters can be simulated. With the distribution of pressure and temperature of the gas phase and the propellant, the influence of plasma during the ignition process can be analyzed. Because of the radial flowing plasma, the propellant in the area of the DRPG is ignited within 0.01 ms, while all propellant in the chamber is ignited within 0.09 ms. The radial ignition delay time is much less than the axial delay time. During the ignition process, the radial pressure difference is less than 5 MPa at the place 0.025 m away from the breech. The radial ignition uniformity is proved. The temperature of the gas increases from several thousand K (conventional ignition) to several ten thousand K (plasma ignition). Compare the distribution of the density and temperature of the gas, we know that low density and high temperature gas appears near the exits of the DRPG, while high density and low temperature gas appears at the wall near the breech. The simulation of the 2D-IB-SPETCG model is an effective way to investigate the interior ballistics process of the ETC launch. The 2D-IB-SPETC model can be used for prediction and improvement of experiments.

Objective To evaluate the learnability and feasibility of a new technique comprising a needle-guidance-system (NGS) for ultrasound-assisted lumbar puncture. Method Using a randomized crossover study design, 24 medical students were asked to perform an ultrasound-assisted lumbar puncture on a gel phantom using two different techniques that each included a paramedian insertion site. Procedure 1 (P1) used a pre-procedural ultrasound scan to predetermine the ideal insertion point. Procedure 2 (P2) applied a new technique comprising an NGS for performing real-time ultrasound-guided lumbar puncture. Success rates and performance times for both procedures were compared. Participants were also asked to complete a post-study questionnaire, both to quantitatively assess the workload involved and state their personal preferences. Results In comparison to the pre-procedural scan (P1), the NGS (P2) was associated with a significant increase in the number of successful punctures per participant (5 (P2) [interquartile range: 3.3–5.0] vs. 3 (P1) [interquartile range: 1.3–4.0], p = 0.005), and led to a significant reduction in performance time (118 seconds vs. 80.6 seconds, p < 0.001). In terms of workload perception, NGS use was associated with significantly better performances and lower frustration levels, as rated by students in the post-study questionnaire. Finally, 23/24 participants stated their preference for P2. Conclusion Our newly-developed technique for real-time ultrasound-guided lumbar puncture proved to be learnable and feasible for novices, and only required a small amount of training. The use of an NGS therefore has the potential to serve as a key feature of the ultrasound-assisted lumbar puncture.

This ballistics study examines whether saline breast implants can decrease tissue penetration in firearm injuries. We hypothesize that the fluid column within a saline breast implant can alter bullet velocity and/or bullet pattern of mushrooming. The two experimental groups included saline implants with 7.4 cm projection and a no implant group. The experimental design allowed the bullet to pass-through an implant and into ballistics gel (n = 10) or into ballistics gel without passage through an implant (n = 11). Shots that passed through an implant had 20.6% decreased penetration distance when compared to shots that did not pass-through an implant; this difference was statistically significant (31.9 cm vs. 40.2 cm, p < 0.001). Implant group bullets mushroomed prior to gel entry, but the no implant group mushroomed within the gel. Bullet passage through a saline breast implant results in direct bullet velocity reduction and earlier bullet mushrooming; this causes significantly decreased ballistics gel penetration.

Since common energetic materials are not easily compatible with existing additive manufacturing techniques, the Energetic Materials department of TNO in the Netherlands worked closely together with the Additive Manufacturing and Material Solutions groups of TNO to develop new types of energetic material that can be processed in standard 3D printers, aiming at better performance and greater flexibility in the manufacturing of energetic products. This contribution gives an overview of potential applications for additive manufacturing of energetic materials, ranging from rocket propellants to explosives, gun propellants, and other applications. The paper then briefly describes TNO’s research efforts since 2013 into AM of energetic materials. Next, the work performed on additive manufacturing of gun propellants, using stereolithography, is described in more detail, including the results of the material development and characterization, and performance test results, including test firings with a 30 mm gun. The paper concludes with an overview of the current status of the research at TNO, as well as a definition of the next steps to be taken and a vision of the future of additive manufacturing of energetic materials.

A two-channel infrared (1.55 μm) laser interferometer intended for measuring velocities of free surfaces in shock-wave experiments is described. Characteristics of the device and comparison results with the VISAR interferometer are given. A combination of Photonic Doppler Velocimetry (PDV) and PDV-Pivot interferometric schemes allows one to implement operation in four different modes and efficiently use capabilities of up-to-date digital oscilloscopes. A 4-GHz bandwidth oscilloscope enables one to measure velocities in a range of 0–6 km/s. The proposed interferometer is efficient for studies of the properties of structural materials, inner ballistics, detonation kinetics, and projectile ability of explosives.

The aim of this paper is to determine the velocity, energy, maximum range and distance at which pellets fired from an air rifle of kinetic energy below 17 J can pose a threat to unprotected human skin. Doppler radar equipment and exterior ballistics software were used in this examination.

Since ancient times, mankind has manifested interest in the development and improvement of weapons, either for military or hunting purposes. Today, in competition with these legal practices, the number of those who commit crimes by non-compliance with the regime of weapons and ammunition has increased exponentially. This is why the technology and methods employed in the area of judicial ballistics, requires constant research and continuous learning. The present paper advances a new experimental set-up and its corresponding methodology, meant to measure the force deployed by the firing pin. The new experimental set-up and procedure consists of a mechatronic structure, based on a piezoelectric force transducer, which allows to measure, in-situ, the force produced by the firing pin when it is deployed. The obtained information can further be used to establish a correspondence between this force and the imprint left on the firing cap. This correspondence furthers the possibility of elaborating a model that would permit ballistic experts to correctly identify a smoothbore weapon.

As illustrated in literature, ballistics is a branch of theoretical mechanics, which studies the construction and working principles of firearms and ammunition, their effects, as well as the motions of projectiles and bullets 1 . Criminalistics identification, as part of judiciary identification represents an activity aimed at finding common traits of different objects, objectives, phenomena and beings, but more importantly, traits that differentiate each of them from similar ones 2-4 . In judicial ballistics, in the case of rifled firearms it is relatively simple for experts to identify the used weapon from traces left on the projectile, as the rifling of the barrel leaves imprints on the bullet, which remain approximately identical even after the respective weapon is fired 100 times with the same barrel. However, in the case of smoothbore firearms, their identification becomes much more complicated. As the firing cap suffers alterations from being hit by the firing pin, determination of the force generated during impact creates the premises for determining the type of firearm used to shoot the respective cartridge. The present paper proposes a simple impact model that can be used to evaluate the force generated by the firing pin during its impact with the firing cap. The present research clearly showed that each rifle, by the combination of the three investigated parameters (impact force maximum value, its variation diagram, and impact time) leave a unique trace. Application of such a method in ballistics can create the perspectives for formulating clear conclusions that eliminate possible judicial errors in this field.

A large body of evidence demonstrates that resistance training has been ineffective for improving walking outcomes in adults with neurological conditions. However, evidence suggests that previous studies have not aligned resistance exercise prescription to muscle function when walking. The main aim of this study was to determine whether a training seminar for clinicians could improve knowledge of gait and align resistance exercise prescription to the biomechanics of gait and muscle function for walking. A training seminar was conducted at 12 rehabilitation facilities with 178 clinicians. Current practice, knowledge and barriers to exercise were assessed by observation and questionnaire prior to and immediately after the seminar, and at three-month follow-up. Additionally, post-seminar support and mentoring was randomly provided to half of the rehabilitation facilities using a cluster randomised controlled trial (RCT) design. The seminar led to significant improvements in clinician knowledge of the biomechanics of gait and resistance training, the amount of ballistic (t = -2.38; p = .04) and conventional (t = -2.30; p = .04) resistance training being prescribed. However, ongoing post-seminar support and mentoring was not associated with any additional benefits F(1, 9) = .05, p = .83, partial eta squared = .01. Further, improved exercise prescription occurred in the absence of any change to perceived barriers. The training seminar led to significant improvements in the time spent in ballistic and conventional resistance training. There was no further benefit obtained from the additional post-seminar support. The seminar led to improved knowledge and significantly greater time spent prescribing task-specific resistance exercises.

We present an attitude estimation method for self-guided ballistic munitions from onboard magnetometers. An adaptive feedback filter is used to remove actuator-induced magnetic disturbances whose spectrum overlaps the signal of interest. A state-augmented extended Kalman filter (EKF) is used to estimate roll rate and sensor bias from the filtered data. Experimental results demonstrate that this method is able to accurately estimate the roll without phase delay inherent in other methods.

In firearm examiners’ and forensic specialists’ casework as well as in air gun proof testing, reliable measurement of the weapon’s muzzle velocity is indispensable. While there are standardized and generally accepted procedures for testing the performance of air guns, the method of seating the diabolo pellets deeper into the breech of break barrel spring-piston air guns has not found its way into standardized test procedures. The influence of pellet seating on the external ballistic parameters was investigated using ten different break barrel spring-piston air guns. Test shots were performed with the diabolo pellets seated 2 mm deeper into the breech using a pellet seater. The results were then compared to reference shots with conventionally loaded diabolo pellets. Projectile velocity was measured with a high-precision redundant ballistic speed measurement system. In eight out of ten weapons, the muzzle energy increased significantly when the pellet seater was used. The average increase in kinetic energy was 31 % (range 9–96 %). To conclude, seating the pellet even slightly deeper into the breech of spring-piston air guns might significantly alter the muzzle energy. Therefore, it is strongly recommended that this effect is taken into account when accurate and reliable measurements of air gun muzzle velocity are necessary.

Radar is assumed to be tracking a cannon launched projectile travelling in a 2 dimensional drag environment. Extended Kalman Filter (EKF) is explored for the estimation of position and velocity of the projectile. Simulation is carried out using MATLAB and the results are presented. Finally, based on the results, EKF is recommended for tracking the projectile.

We describe several examples where we use cross-correlation functions to quantify the similarity of 2D surface profiles or of 3D areal surface topography images. The applications have included (1) the manufacture of standard reference material (SRM) bullets and casings, (2) methods to assess whether bullets or casings have been fired by the same firearm, and (3) research to quantify similarities or differences between profiles of the same surface measured by different techniques or between a master surface and its replicas. The cross-correlation maximum is the functional parameter used to quantify similarity. A second parameter, called the relative profile (2D) difference or relative areal topography (3D) difference, may also be used to quantify differences and to recognize the ambiguous condition when two results have different vertical ( z -) scales but identical shapes. Most of these examples have been applied in support of ballistics inspection methods in crime labs, but the methods are generally useful for estimating the accuracy of surface replication techniques or the ability of different surface topography instruments to measure the same surface and provide the same result. The instruments used in these studies were a stylus instrument and a Nipkow-disk type confocal microscope. Cross-correlation functions may also be used to assess differences resulting from the use of different filters to modify the same surface profile or topography image.

With more than 1 trillion artificial objects smaller than 1 μm in low and geostationary Earth orbit, space assets are subject to the constant threat of space debris impact. These collisions occur at hypervelocity or speeds greater than 3 km/s. In order to characterize material behavior under this extreme event as well as study next-generation materials for space exploration, this paper presents a unique two-stage light-gas gun capable of replicating hypervelocity impacts. While a limited number of these types of facilities exist, they typically are extremely large and can be costly and dangerous to operate. The design presented in this paper is novel in two distinct ways. First, it does not use a form of combustion in the first stage. The projectile is accelerated from a pressure differential using air and inert gases (or purely inert gases), firing a projectile in a nominal range of 1–4 km/s. Second, the design is modular in that the first stage sits on a track sled and can be pulled back and used in itself to study lower speed impacts without any further modifications, with the first stage piston as the impactor. The modularity of the instrument allows the ability to investigate three orders of magnitude of impact velocities or between 101 and 103 m/s in a single, relatively small, cost effective instrument.

In the first part of the paper [Naik D, Sankaran S, Mobasher B, Rajan SD, Pereira M. Development of reliable modeling methodologies for fan blade-out containment analysis. Part I: experimental studies. Int J Impact Eng, in press], details of the experiments to characterize the behavior of dry fabrics including Kevlar®49, and ballistic tests involving the fabric were presented. In this second part of the paper, we discuss the development and verification of a constitutive model for dry fabrics for use in an explicit finite element program. The developed constitutive model is implemented as a user-defined subroutine in LS-DYNA, a commercial finite element program. It is then used to simulate a suite of ballistic tests [Naik D, Sankaran S, Mobasher B, Rajan SD, Pereira M. Development of reliable modeling methodologies for fan blade-out containment analysis. Part I: experimental studies. Int J Impact Eng, in press] that replicate conditions seen in an engine fan blade out (FBO) event. A qualitative and quantitative comparison of the deformation shape of the fabric containment system and a quantitative comparison of the absorbed energy are carried out. Results indicate that the developed constitutive model provides a very encouraging start in modeling these high-speed events and could provide as Federal Aviation Administration (FAA) desires, an attractive complement to full-scale engine FBO tests.

Ballistic imaging is the name applied to a category of optical techniques that were originally developed for medical applications. Recently, ballistic imaging was adapted to acquire instantaneous images of the liquid core inside atomizing sprays; a region that has been heretofore inaccessible to spray researchers. An important difference between spray research and the medical imaging problem is the need for high fidelity single-shot (within 10 ls) imaging in a spray whereas stationary tissue images can be averaged. Transient ballistic imaging diagnostics have been used to reveal details of the primary breakup process in a LOX injector, a turbulent water jet, a water jet in cross-flow, a transient diesel fuel spray, a rocket fuel injector, and an aerated spray. This paper briefly discusses various methods for imaging the liquid core, it introduces ballistic imaging and provides specific examples, it describes detailed studies of photon transmission through dense media, and it then discusses incorporation of those results into a model for a ballistic imaging instrument that can evaluate and optimize various concepts.

The present paper constructs a rigid–plastic model to assess the effect of a soft nose on the perforation of metallic plates struck by a stubby projectile. A low-density nose-cabin-column, i.e., an assembly of seeker and guidance/control unit, is installed in the front of a real missile. It usually acts as an energy absorber and buffer in the perforation of metallic plates and notably affects the terminal results of projectile. The problem is equivalent to a blunt rigid projectile with a soft nose perforating a circular metallic plate. Effects of transverse shear, bending and membrane deformations on the perforation process are included in a rigid–plastic analysis. Especially the effect of an ahead structural response, induced by the soft nose impacting the target plate, is considered in the model. Analytical formulae for the ballistic performance are obtained for a range of plate thicknesses, which agree well with available experimental results.

This study evaluates the energy absorption, perforation and damage evolution created by cylindrical projectile of different nose geometries in woven roving mat/epoxy laminates with 0.45� orientation. A series of ballistic impact tests have been carried out on the laminate with projectile nose geometries representing hemispherical, conical, and conical with round nose and truncated tip. A gas gun projectile launcher set-up was employed to impact the target at different speeds. The damage pattern, perforation mechanism and ballistic limit for each type of projectiles have been studied. Truncated-nose projectile shows the highest ballistic limit while sharp-nose shows the lowest. A quasi-static punch test was carried out on targets with projectiles of above-mentioned nose geometries to assess the damage evolution at a constant strain rate. The maximum load required to cause perforation during punch test was noted for hemispherical-nose projectile. An in-depth layerwise analysis was carried out to analyse the damage in each layer. Copyright � 2008 Taylor & Francis.

Helmet designs have evolved over the last three millennia and the use of helmet may be as old as warfare itself. In 600 B.C. the Greeks in Sparta crafted single-piece helmet from bronze, which provided complete head protection, leaving only narrow slits in front for vision and for ventilation. Later in 250 B.C. the Romans developed several helmet designs, which included the round legionary's helmet and the gladiator's helmet, with broad brim and pierced visor, providing exceptional head, face and neck protection. The use of helmets in battle fields continued until the end of 13th century, which signaled a radical change in the emphasis on head protection. With the invention of gunpowder and the growing effectiveness of firearms over swords and spears, helmets gradually vanished from the battle scenes. The metal helmet that once protected against sword and arrows offers little protection against musket rounds. The United States Civil War provides an excellent illustration—in war soldiers donned cloth hats and caps, with little or no emphasis on head protection. In World War I, the helmet was reintroduced because it protected the head against metal-fragments of exploding artillery shells and indirect fire. The French, owing to General Adrian, were the first to adopt the helmet as standard equipment in early 1915. The British, the Germans, and then the rest of Europe soon followed. In World War I, the German helmet provided the best protection for soldiers. It was manufactured in at least two sizes, and different head contours were accommodated by an adjustable leather lining, which provided comfort and allowed for ventilation. The typical helmet used during that period was a hardened steel shell with an inner liner and weighed about 0.5–1.8 kg. Since then, helmets have been issued to troops in all military conflicts, marking the beginning of the development of modern military helmet. This paper presents the results from experiments and AUTODYN-3D® simulations on the ballistic impact of a KEVLAR® helmet. In the experiment, spherical projectile (~11.9 g), launched from a light gas gun, strikes the helmet with an impact velocity of 205 m/s. The interaction of the projectile with the KEVLAR® helmet is captured using high-speed photography. This helmet-projectile interaction is compared with that obtained from the AUTODYN-3D® simulation. Post-test damage photos from the experiments are also compared with those from the simulations. The response of the helmet from the simulations is consistent with those from the experiments. Also included in this paper are AUTODYN-3D® simulations on two ballistics test standards for KEVLAR® helmets. They are namely the NIJ-STD-0106.01 Type II and the V50 requirement of the US military specification for Personal Armor System Ground Troops (PASGT) Helmet, MIL-H-44099A. For the simulation on MIL-H-44099A, a fragment-simulating projectile (FSP) strikes the helmet with an impact velocity of 610 m/s. The simulation revealed that an impact velocity above 610 m/s is required to perforate the KEVLAR® helmet. For the simulation on NIJ-STD-0106.01 Type II helmet, the projectile is a 9 mm full-jacketed bullet with a striking velocity of 358 m/s. Results from the simulation show that the KEVLAR® helmet is able to defeat a 9 mm full-jacketed bullet traveling at 358 m/s.

Internal ballistics simulations of solid rocket motors have been conducted with the propellant grain's 3-D burning surface geometry described by a new minimum distance function approach and the internal flowfield represented by 1-D, time-dependent, single-phase compressible flow equations. The combustion model includes erosive burning and unsteady, dynamic burning corresponding to transient energy storage in the heated surface layer of the propellant. The integrated internal ballistics code (Rocballist) is used to investigate the role of these two burning rate augmenting mechanisms in solid rocket motor performance. Two tactical motors are used as test cases. Results indicate that dynamic burning can be the dominant factor in producing a short-duration ignition pressure spike in low-L* motors, particularly if the L/D ratio is not too large and the port cross section is nonrestrictive (e.g., center perforated grain). However, when L/D is large and the port cross section is noncircular in the aft section (aft fins/slots), erosive burning can take over in dominating the burning rate to the extent that an otherwise progressive pressure-time trace becomes regressive/neutral. That is, erosive burning can effectively prolong the initial pressure spike in some star-aft motors. The results also show that with sufficiently accurate models of dynamic burning and erosive burning, it is reasonable to expect reliable internal ballistics predictions with suitable simplified flowfield models, thereby realizing significant reductions in computation time compared with 3-D, multiphase reacting flow simulations.

The aim of this work is to develop a methodology for the evaluation of the ballistic requirements of a helicopter component. The situation studied in the work refers to the possibility of a damaged helicopter performing an emergency manoeuvre and a 30-min return flight after the impact of a 7.62 NATO projectile on a shaft of the tail rotor transmission. The paper describes the finite element methodology adopted to simulate the impact of the projectile on the shaft, and outlines the hypotheses on which this methodology is based. The numerical simulation of the propagation of the crack originating from the damage caused by the impact is also described. It is thus possible to determine the time required to reach failure of the shaft. The effect of the residual stresses on the residual life of the shaft is studied in detail.

Woven fabrics are widely used in soft body armour. The ballistic performance of a range of narrow fabrics was determined and compared to that of wider fabric panels. In contrast to conventional ballistic fabrics, it was found that the performance of narrow fabrics was highly sensitive to changes in fabric specification. Furthermore, it was shown that square weave fabrics may not necessarily be superior to unbalanced fabrics in narrow fabric form. It was also confirmed that narrow fabrics absorb more energy than wider fabric panels when undergoing direct ballistic impact, particularly when gripped in a two-sided configuration. Ways were sought of utilising these improvements in performance when the narrow fabrics are brought together to make full-width armour panels. Potentially, the observed improvements in performance could have been offset by the lines of weakness between adjacent fabric strips or by the weight of the structure required to grip on two sides. However, after investigating a number of potential solutions, significant improvements in the performance-to-weight ratios over simple fabric armour were achieved using an assembly of narrow fabrics attached to a lightweight composite frame.

A research program was funded by the European space agency (ESA) to improve and optimize the shields used to protect the manned elements of the international space station (ISS) against impacts of micro-meteoroids and orbital debris. After a review of existing shielding systems and after a series of light gas gun (LGG) experiments to screen interesting new materials and configurations, the research focused on shields with a metallic outer bumper, an intermediate stuffing and an inner metallic wall (representing the pressure shell of a manned spacecraft). Additional LGG experiments were performed on several configurations, with bumpers containing aluminum foam or made from titanium and aluminum super-alloys and with several combinations of stuffing materials. The comparison of the test results showed that ceramic cloth (Nextel) plus aramid fabric (both 2D and 2.5D Kevlar weaving) used as intermediate bumper gave a good protection compared to the overall area density requested. Configurations with by-layered aluminum foam bumpers (sandwich panels with asymmetric Al face sheets and a core made from Al foam) and Kevlar stuffing showed excellent resistance to normal impacts at about 6.5 km/s. However, the influence of material properties varying from batch to batch and threshold phenomena made ranking among the tested options rather difficult. The test campaign showed that it was rather difficult to improve over the already good ballistic performances of the debris shields developed by Alenia Spazio for the ISS manned elements. The by-layered Al-foam bumper and Kevlar stuffing configuration was selected for additional tests, including low velocity and oblique impacts, to develop ballistic limit curves.

Currently, optical devices, such as microscopes and CCD cameras, are utilized for identification of bullets and tool marks in the field of forensic science. While these optical methods are easily manageable and effective, they are under great influence of illumination condition. In other words, appearances of striations through these optical devices have possibility to be changed by lighting condition. Besides these appearance-based approaches, we can utilize three dimensional (3D) geometric data of tool marks that are free from lighting condition. In this study, we focused on 3D geometric data of landmark impressions on fired bullets for identification. We obtained the 3D surface data of tool marks by a confocal microscope and reconstructed virtual impressions on a PC monitor from the geometric data. Furthermore, the 3D data are exploited to numerical matching of two surface shapes. We also visualized the difference of two shapes. In order to do this, two surface models are aligned automatically. In this process, pairings of correspondent points on both surfaces are determined. Distance analysis between these pairs leads to a shape comparison. Since comparison results are visualized, they are intuitive and easily perceptive.

There has long been a need to understand the impact response of explosive materials, and continual improvements result from the design of careful, well-instrumented experiments. This article summarizes details of the design and construction of a laboratory facility capable of launching projectiles at explosive targets at velocities up to 1500 m s−1. There are two types of experiment that are required. In the first, a gun launches a plate of great planarity at an equally flat target. This geometry is known as plate impact and a target loaded in this manner experiences a state of one-dimensional strain. This loading is accomplished by launching plane impactors onto targets aligned to micron tolerances, normal to the impact axis to less than 0.5 mrad of tilt. In the second, it is required to attain the ability to recover impacted explosive targets that have been loaded in one-dimensional strain for subsequent microstructural assessment. The development of this capability will be described in a subsequent pub...

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.

The physical and chemical phenomena involved in the ballistic process, both in conventional guns and in electrothermal-chemical (ETC) guns, are very complex, so that optimization of gun performance requires a detailed understanding of the influence of different parameters. The initial stage of propellant ignition is critical to the rest of the process, in terms of both performance (muzzle velocity, repeatability) and safety. A better understanding of the ignition stage is thus very important in achieving improved performance. In this paper, we propose a new method and ignition sensor aimed at providing direct experimental information about the propellant ignition process. We further report on measurements of the ignition delays, and the propagation of the "ignition wave", performed using these sensors in experimental devices such as closed bombs and gun simulators.

We apply two-wavelength phase shifting interferometry to generate 3D surface profile maps of spent bullet cartridge cases. From the captured interferograms, an optimized algorithm was used to calculate a phase profile from which a precise digital surface map of the cartridge casing may be produced. This 3D surface profile is used to enhance a firearms examiner's ability to uniquely identify distinct features or toolmarks imprinted on the casing when the weapon is fired. These features play a key role in the matching process of ballistic forensic examination.

The U.S. Army Research Laboratory conducted a study to examine the effects of a small caliber (7.62-mm) cartridge s spit-hole on the interior ballistic performance of the cartridge. The performance metrics evaluated were cartridge pressure and muzzle velocity. The laboratory incorporated its custom breech apparatus that measures primer pocket pressure, and used standard midcase pressure measurements and high-speed imaging to evaluate early projectile motion out of a custom-built short barrel gun.

A new gas gun technique has been developed in which a small mass fragment is impacted in a precise orientation by a thin metal disk and then recovered. The metal disk is placed inside a hollow sabot that also contains a miniature soft-recovery chamber. After impact, the sabot with the fragment inside is recovered in rags. The fragment will be found either in front of the impactor disk or behind it in the soft-recovery chamber, depending upon whether the disk was perforated. This technique can be used to determine accurate ballistic-limit velocity measurements for fragments with masses less than 0.6 gm. Thirty-six experiments have been performed using this technique for masses in the 0.2–0.6 gm range. Results are presented for several experiments.

An analysis is made of the optimal conditions for laser irradiation and of typical paths of man-made debris in laser-reactive protection of spacecraft. Protection is provided by the recoil momentum resulting from laser evaporation of the surface layers of a debris particle, which can change its path, thus avoiding an collision with a spacecraft. Estimates are obtained of changes in the paths of particles with a characteristic size 1 cm when they are irradiated by radiation from a laser located on the protected spacecraft moving along one of the circular orbits at altitudes of 200, 400, or 700 km above the Earth's surface.

Research into the high velocity impact of materials has necessitated the setting up of a new facility at the Royal Military College of Science. A light-gas gun and flash x-ray system were acquired to meet the research objectives. In this article, the light-gas gun and auxiliary equipment are described. Modifications were made to the facility to ensure the safety of personnel during a gas gun and flash x-ray firing. An analysis was carried out to select operating parameters within the maximum safe loading condition of the gas gun. The work met the safety and operational objectives, and suggestions for future work are made.

In recent years, great strides have been made regarding the identification of the dominant loads that cause beam type vibrations of cannons during ballistic operation. These motions infringe upon shot accuracy because at projectile disengagement, the muzzle's kinematic state may compromise the projectile's intended flight path. This is particularly relevant to coil gun loading, which, unlike gas launch, applies the recoil load to the muzzle end of the barrel instead of the breech. This effectively places the barrel in a state of columnar compression during the launch cycle that may exacerbate structural vibrations known as gun "whip".

Medical literature abounds with reports on injuries and fatalities caused by airgun projectiles. While round balls or diabolo pellets have been the standard projectiles for airguns for decades, today, there are a large number of different airgun projectiles available. A very uncommon — and until now unique — discarding sabot airgun projectile (Sussex Sabo Bullet) was introduced into the market in the 1980s. The projectile, available in 0.177 (4.5 mm) and 0.22 (5.5 mm) caliber, consists of a plastic sabot cup surrounding a subcaliber copper-coated lead projectile in typical bullet shape. Following the typical principle of a discarding sabot projectile, the lightweight sabot is supposed to quickly loose velocity and to fall to the ground downrange while the bullet continues on target. These sabot-loaded projectiles are of special forensic interest due to their non-traceability and ballistic parameters. Therefore, it is the aim of this work to investigate the ballistic performance of these sabot airgun projectiles by high-speed video analyses and by measurement of the kinetic parameters of the projectile parts by a transient recording system as well as observing their physical features after being fired. While the sabot principle worked properly in high-energy airguns (E > 17 J), separation of the core projectile from the sabot cup was also observed when discharged in low-energy airguns (E

Discrimination of the decoys and warhead is one of the key problems in the ballistic missile defense system. As the ground-based radars hardly observe the decoy release, it is of profound significance to investigate the ballistic trajectory inverse technology of space target. In this paper, a method of inverse technology based on two-object movement theory of midcourse ballistic trajectory is presented firstly. An Extended Kalman filter algorithm is then proposed to preprocess the data of the ballistic trajectory. The new algorithm shows a better performance comparing to the traditional least squares filter algorithm. Finally, some simulations are carried out to analyze the estimation error, considering some factors such as radar measurement error and radar parameters.

Through this work we show the development of small hybrid rocket thrusters intended for attitude control systems of small satellites and space-crafts. These thrusters have the advantage of being controllable and having higher specific impulse than the traditional solid fuel thrusters or hydrazine based thrusters. An internal ballistic model of the small hybrid thrusters is shown together with numerical results for the thrust-curves and other relevant parameters. The internal ballistic model is shown to be influenced by the regression speed and the need for higher regression speed fuel-oxidizer pairs is, hence, shown. In the present study we also show how to couple the hybrid combustion process with the unsteady flow. Moderately high specific impulses can be obtained by using polypropylene as fuel and NO2 as oxidizer. Detailed discussion is done on the construction of the thrusters as well as the engineering solutions for the combustion chamber, injector and nozzle. Several experimental thrust-curves are shown together with the estimation of total impulse and specific impulse.

The dual objective of developing the present ballistic model is to predict an accurate force-time history in a monolithic thick plate due to penetration by a projectile, and to analytically describe the physical phenomena that occur during a penetration experiment in conjunction with measuring the physical parameters. The analytical model developed considers the evaluation, and prediction of the following quantities: (a) shape and size of the cavity, (b) residual strength of the target, (c) depth of penetration in the target, (d) residual length of the projectile, (e) pressure distribution along the cavity wall and (f) force-time history for the penetration event.

Ignition transients are a critical and complex period of operation in solid rocket motors. During the ignition interval, many factors combine which must be taken into account in the design of the entire system. There are many methods in use to analyze different aspects of the ignition processes, and the level of analysis complexity varies with need and available resources. These methods vary from empirically based sizing rules to complex physics-based analyses. There are still many aspects of ignition transient behavior that have not been fully characterized, and research is continuing to fully understand all processes that occur during ignition transients in solid rocket motors. Keywords: ignition; solid rocket motor (SRM); propellant; ballistics; igniters; transient

The Sandia Hypervelocity Launcher (HVL) uses impact techniques on a two-stage light-gas gun to launch flier plates to velocities in excess of 10 km/s. An important problem in designing successful third stage techniques for impact launching fliers to such velocities is detailed understanding of the interior ballistic performance of the third stage. This is crucial for preventing melt and fracture of the flier plates during the extraordinary accelerations that they undergo (accelerations on the order of 10{sup 9} g are typical on the HVL). We seek to optimize HVL launch conditions in order to achieve two major goals: first, to maximize the potential launch velocity for a given flier, and second, to allow different flier configurations. One tool that we can apply in studying HVL performance is the use of multi-dimensional wave propagation codes. We have used such codes, particularly the Sandia Eulerian code CTH, to study a variety of interior ballistics issues related to gun performance and launcher development for almost ten years. Recently this work has culminated in a major contribution to HVL design, namely the capability to launch ``chunk`` fliers. `Me initial phases of design development were solely devoted to CTH computations that studied potential designs, identifiedmore » problems, and posed possible solutions for launching chunk fliers on the HVL. Our computations sufficiently narrowed the design space to the point that systematic experimental progress was possible. Our first experiment resulted in the successful launch of an intact 0.33 gram titanium alloy chunk flier to a velocity of 10.2 km/s. The thickness to diameter ratio of this flier was approximately 0.5.« less

Herein, we study the technique of improving the gun performance by installing a diaphragm in the pump tube of the gun. A CFD study is carried out for the 0.28 in. gun in the Hypervelocity Free Flight Radiation (HFF RAD) range at the NASA Ames Research Center. The normal, full-length pump tube is studied as well as two pump tubes of reduced length (approximately 75% and approximately 33% of the normal length). Significant improvements in performance are calculated to be gained for the reduced length pump tubes upon the addition of the diaphragm. These improvements are identified as reductions in maximum pressures in the pump tube and at the projectile base of approximately 20%, while maintaining the projectile muzzle velocity or as increases in muzzle velocity of approximately 0.5 km/sec while not increasing the maximum pressures in the gun. Also, it is found that both guns with reduced pump tube length (with diaphragms) could maintain the performance of gun with the full length pump tube without diaphragms, whereas the guns with reduced pump tube lengths without diaphragms could not. A five-shot experimental investigation of the pump tube diaphragm technique is carried out for the gun with a pump tube length of 75% normal. The CFD predictions of increased muzzle velocity are borne out by the experimental data. Modest, but useful muzzle velocity increases (2.5 - 6%) are obtained upon the installation of a diaphragm, compared to a benchmark shot without a diaphragm.

A ballistic coefficient (BC) can be determined by using two chronographs a measured distance away from each other and shooting a bullet so the velocity is measured by the two devices. Ballistic modeling software requires accurate measurement of ballistic coefficients to accurately predict downrange trajectories, wind drift, and retained energy. This article presents new measurements for 21 different bullets and shows that BCs can differ significantly from the claims of the manufacturer. These differences can cause significant differences in the predictions of ballistic modeling software. Evidence suggests that these variations are probably not due to excessive bullet yaw.