Search

The present work aims at development of novel hybrid materials from genipin crosslinked collagen or collagen/chitosan hydrogels containing various types of TiO 2 nanoparticles characterized with different anatase/rutile ratios. Collagen and chitosan were selected as hydrogel components since they are biopolymers being, like collagen, the major compound present in extracellular matrix or exhibit structural similarity to glycosaminoglycans, like chitosan. TiO 2 nanoparticles were introduced to the hydrogel matrices to improve their mechanical properties as well as bioactivity. A series of twelve novel hybrid materials were prepared and their physicochemical, mechanical and biological properties were evaluated. It was found that TiO 2 nanostructures introduced to the hydrogels have significant influence on the swelling properties of the synthesized hybrids and their impact is strongly dependent on the type of matrices. The surfaces of hybrid materials were found to be more hydrophilic than these of corresponding hydrogel matrix. It was also observed that, the storage modulus values of the hybrids based on collagen-chitosan hydrogel are comparable to these for plain hydrogels what indicates that the mechanical properties of the materials obtained are satisfactory for possible biomedical application. The in vitro cell culture studies have shown that prepared materials are biocompatible as they can support mitochondrial activity of MEFs as well as MG-63 cells. In vitro experiments performed under simulated body fluid (SBF) conditions have revealed that all studied TiO 2 nanoparticles present in hydrogel matrices, regardless of anatase/rutile ratio, successfully induced formation of apatite-like structures. The hybrid materials developed here are promising candidates for preparation of bioactive, injectable scaffolds for tissue engineering., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The progress in tissue regeneration is strongly dependent on the development of biocompatible materials with properties resembling those of a native tissue. Also, the application of noninvasive methods of delivering the scaffold into the tissue defect is of great importance. In this study we present a group of biopolymer-based materials as potential injectable scaffolds. In contrast to other studies involving collagen neutralization or additional incubation of gel in genipin solution, we propose collagen and collagen-chitosan gels crosslinked in situ with genipin. Since some parameters of the cells should be considered in the microscale, the steady-state fluorescence anisotropy was applied to study the microenvironment of the gels. To our knowledge we are the first to report on microrheological properties, such as gel time and microviscosity, for this group of hydrogels. Rapid gelation at physiological temperatures found makes these materials of special interest in applications requiring gel injectability. Physico-chemical investigation showed the influence of the crosslinking agent concentration and chitosan addition on the crosslinking degree, swelling ratio, gel microviscosity, and the degradation rate. Strong correlation was revealed between the surface wettability and the viability of cultured mesenchymal stem cells. Cytotoxicity studies indicated that the collagen-chitosan hydrogels showed the best biocompatibility.

A novel biopolymeric material in the form of nano/microspheres was developed which was capable of adsorbing coronaviruses. The biopolymer was obtained by crosslinking of chitosan (CHIT) with genipin, a nontoxic compound of plant origin, in inverted emulsion and reacting the chitosan nano/microspheres obtained (CHIT-NS/MS) with glycidyltrimethyl-ammonium chloride (GTMAC). As a result the nano/microspheres of N-(2-hydroxypropyl)-3-trimethyl chitosan (HTCC-NS/MS) were obtained. HTCC-NS/MS were studied as the adsorbents of human coronavirus NL63 (HCoV-NL63), mouse hepatitis virus (MHV), and human coronavirus HCoV-OC43 particles in aqueous virus suspensions. By studying cytopathic effect (CPE) caused by these viruses and performing PCR analyses it was found HTCC-NS/MS strongly adsorb the particles of HCoV-NL63 virus, moderately adsorb mouse hepatitis virus (MHV) particles, but do not adsorb HCoV-OC43 coronavirus. The adsorption capacity of HTCC-NS/MS well correlated with the antiviral activity of soluble HTCC against a given virus. Importantly, it was shown that HCoV-NL63 particles could be desorbed from the HTCC-NS/MS surface with a salt solution of high ionic strength with retention of virus virulence. The obtained material may be applied for the removal of coronaviruses, purification and concentration of virus samples obtained from biological matrices and for purification of water from pathogenic coronaviruses. [ABSTRACT FROM AUTHOR]

Collagen, chitosan and hyaluronic acid based multicomponent injectable and in situ gellating biomimetic hybrid materials for bone tissue engineering applications were prepared in one-step procedure. The bioactive phase in the form of surface-modified silica particles was introduced to the solutions of biopolymers and simultaneously crosslinked with genipin both the biopolymer matrix and dispersed particles at 37 °C. The novel approach presented here involved the use of silica particles which surfaces were priory functionalized with amino groups. That modification makes possible the covalent attachment of silica particles to the polymeric hydrogel network on crosslinking with genipin. That methodology is especially important as it makes possible to obtain the hybrid materials (biopolymer-silica particles) in which the problems related to the potential phase separation of mineral particles, hindering their in vivo application can be eliminated. The hybrids of various compositions were obtained and their physicochemical and biological properties were determined. The in vitro experiments performed under simulated body fluid conditions revealed that the amino-functionalized silica particles covalently attached to the biopolymeric network are still bioactive. Finally, the in vitro cell culture studies shown that the materials developed are biocompatible as they supported MG-63 cells adhesion, proliferation as well as Alkaline phosphatase (ALP) expression. Unlabelled Image [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Biopolymeric chemically crosslinked hydrogels were obtained and characterized. • Hydrogels’ properties can be tuned by changing hyaluronic acid and genipin content. • The in vitro cell culture study show that the hydrogels’ surfaces are biocompatible. • Obtained hydrogels can serve as a novel promising biomimetic injectable scaffolds. Abstract Studies on synthesis, physico-chemical and biological properties of novel biomimetic materials, potentially useful as injectable hydrogels are presented. These materials are in situ prepared chemically crosslinked collagen/chitosan/hyaluronic acid-based hydrogels exhibiting potential for tissue regeneration. Optimization of hydrogels involved testing the effect of various concentration of crosslinking agent (genipin) as well as different ratios of biopolymers used on their properties. The changes in the content of hyaluronic acid and in the genipin concentration used have been shown to be crucial. Employing the highest concentration of crosslinking agent studied (20 mM) the hydrogels of compact structure, characterized by good mechanical properties and prolonged degradation profile can be obtained. Changing the HA content in sol mixture the hydrogel of various wettability; more or less hydrophilic when compared to pure collagen/chitosan hydrogels can be fabricated. The in vitro cell culture study has shown that the surface of the prepared materials ensures suitable biocompatibility. These hydrogels can support the proliferation and adhesion of MG-63 cell line as it was demonstrated using Alamar Blue assay and SEM observations. It is believed that the collagen/chitosan/hyaluronic acid hydrogels crosslinked with genipin are particularly promising materials for bone regeneration procedures, especially attractive for regeneration of small bone losses. This is the first paper in the litearature presenting results of studies on that type of biopolymeric injectable hydrogels chemically crosslinked with genipin. [ABSTRACT FROM AUTHOR]

When designing materials for tissue engineering applications various parameters characterizing both materials and tissue have to be taken into account. The characteristics such as chemistry, elasticity, wettability, roughness and morphology of the substrate’s surface have significant impact on cell behavior. The paper presents biopolymer (collagen/chitosan) based hydrogel materials with tunable elasticity and surface properties useful for fabrication of substrates for cell culture. Using simple chemical approach involving the change in concentration of crosslinking agent (genipin) and composition of the reaction mixture the hydrogels characterized with various features were obtained. Detailed analysis of morphology, topography, roughness and elasticity of surface performed using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and rheological measurements has shown that the topographical aspects and roughness parameter can be modulated in nanoscale regime (13–47 nm). Substrate’s elasticity could be modified in a wide range (0.2–270 kPa). Biological in vitro studies on fibroblasts behavior revealed that the materials prepared provide satisfactory conditions for cell culture, ensuring their high viability, good adhesion and normal morphology. The genipin crosslinked collagen-chitosan hydrogels characterized by denser fiber structure, higher elasticity and lower surface roughness are the most attractive supports for fibroblasts cultivation. The results obtained indicate that the properties of the materials developed can be easily tailored to the needs of the given type of cells. [ABSTRACT FROM AUTHOR]

The aim of this study was to assess osteogenic potential of three groups of biopolymeric hydrogel-based surfaces made of plain collagen, chitosan or collagen/chitosan, crosslinked with genipin or all three biopolymers modified with silica particles of two sizes (S1 = 240 nm and S2 = 450 nm). Biocompatibility and osteoinductive properties of the resulting composites were analyzed in the human bone marrow-derived mesenchymal stromal cells (hBMSCs) in vitro cultures. It was revealed that all tested materials are biocompatible and significantly enhance ALP activity in hBMSCs which was particularly pronounced for collagen/chitosan based hybrids. Gene expression ( RUNX-2 , COL-I , OC and VEGF mRNA) analyses performed in hBMSCs cultured at collagen/chitosan materials showed that ColChS1 hybrid the most effectively promotes osteogenic differentiation of hBMSCs. SEM and EDS analyses of materials carried out after 20 days of hBMSCs culturing on ColCh-based hydrogels revealed that the hybrid materials enhanced hBMSCs-mediated mineralization of ECM. Our studies revealed that collagen/chitosan hydrogels modified with silica particles of smaller sizes (ColChS1) exhibit high pro-osteogenic properties without the need of applying any additional osteogenic inducers. That suggests that ColChS1 having the intrinsic osteoinductive activity holds great potential as material of choice for bone regeneration procedures, especially in regeneration of small bone losses. [ABSTRACT FROM AUTHOR]

Highlights: [•] ι-Carrageenan was grafted with PNIPAM. [•] A novel thermoresponsive polyelectrolyte was obtained. [•] Polymer shows LCST close to that characteristic of PNIPAM homopolymer. [•] Polymer interacts with DTAC, a model cationic surfactant. [•] The nature of these interactions is different than that for the native carrageenan. [ABSTRACT FROM AUTHOR]