Search

Patients with diabetes suffer from a variety of complications and easily develop diabetic chronic wounds. The microenvironment of diabetic wounds is characterized by an excessive amount of reactive oxygen species (ROS) and an imbalance of proinflammatory and anti-inflammatory cells/factors, which hinder the regeneration of chronic wounds. In the present study, a wound dressing with immunomodulation and electroconductivity properties was prepared and assayed in vitro and in vivo. [2-(acryloyloxy) ethyl] Trimethylammonium chloride (Bio-IL) and gelatin methacrylate (GelMA) were 3D printed onto a doxycycline hydrochloride (DOXH)-loaded and ROS-degradable polyurethane (PFKU) nanofibrous membrane, followed by UV irradiation to obtain conductive hydrogel strips. DOXH was released more rapidly under a high ROS environment. The dressing promoted migration of endothelial cells and polarization of macrophages to the anti-inflammatory phenotype (M2) in vitro. In a diabetic rat wound healing test, the combination of conductivity and DOXH was most effective in accelerating wound healing, collagen deposition, revascularization, and re-epithelialization by downregulating ROS and inflammatory factor levels as well as by upregulating the M2 macrophage ratio. STATEMENT OF SIGNIFICANCE: The microenvironment of diabetic wounds is characterized by an excessive amount of reactive oxygen species (ROS) and an imbalance of proinflammatory and anti-inflammatory cells/factors, which hinder the regeneration of chronic wounds. Herein, a wound dressing composed of a DOXH-loaded ROS-responsive polyurethane membrane and 3D-printed conductive hydrogel strips was prepared, which effectively accelerated skin regeneration in diabetic wounds in vivo with better epithelialization, angiogenesis, and collagen deposition. DOXH regulated the dysfunctional wound microenvironment by ROS scavenging and polarizing macrophages to M2 phenotype, thereby playing a dominant role in diabetic wound regeneration. This design may have great potential for preparing other similar materials for the therapy of other diseases with excessive inflammation or damage to electrophysiological organs, such as nerve defect and myocardial infarction.

Both of the surface topographical features and distribution of biochemical cues can influence the cell-substrate interactions and thereby tissue regeneration in vivo. However, they have not been combined simultaneously onto a biodegradable scaffold to demonstrate the synergistic role so far. In this study, a proof-of-concept study is performed to prepare micropatterns and peptide gradient on the inner wall of a poly (D,L-lactide-co-caprolactone) (PLCL) guidance conduit and its advantages in regeneration of peripheral nerve in vivo. After linear ridges/grooves of 20/40 μm in width are created on the PLCL film, its surface is aminolyzed in a kinetically controlled manner to obtain the continuous gradient of amino groups, which are then transferred to CQAASIKVAV peptide density gradient via covalent coupling of glutaraldehyde. The Schwann cells are better aligned along with the stripes, and show a faster migration rate toward the region of higher peptide density. Implantation of the nerve guidance conduit made of the PLCL film having both the micropatterns and peptide gradient can significantly accelerate the regeneration of sciatic nerve in terms of rate, function recovery and microstructures, and reduction of fibrosis in muscle tissues. Moreover, this nerve conduit can also benefit the M2 polarization of macrophages and promote vascularization in vivo., Graphical abstract Dual gradient of nerve-affinitive CQAASIKVAV peptides and linear ridges/grooves on the inner surface of biodegradable guidance conduit synergistically promote the regeneration of sciatic nerve in terms of rate, function recovery and microstructures, and reduction of fibrosis in muscle tissues in vivo.Image 1, Highlights • CQAASIKVAV peptide gradient and micropatterns are integrated on inner surface of a nerve regeneration conduit. • Cell alignment and migration are promoted toward the region of a higher peptide density. • The peptide gradient and micropatterns can synergistically accelerate the regeneration of sciatic nerve in vivo.

Immunomodulation is an important phenomenon in the normal mammalian host response toward an injury, and plays a critical role in tissue regeneration and regenerative medicine. Different phenotypes of macrophages show an array of activation states compassing pro-inflammatory to pro-alleviating cells, which are the critical players to modulate immune response and tissue regeneration. In this study, macrophage membranes of different phenotypes (macrophages (M0), classically activated macrophages (M1) and alternatively activated macrophages (M2)) were coated onto poly-ε-caprolactone (PCL) nanofibers to acquire exterior surface proteins and similar functions of the natural membranes. In vitro results unveiled that these nanofibers, especially the M2-PCL nanofibers, can suppress the activities of inflammatory markers such as TNF-α and IL-1β, and stimulate anti-inflammatory markers such as Arg-1, IL-10 and TGF-β. In a C57BL/6 mouse model, the macrophage membrane-coated nanofibers, especially the M2-PCL nanofibers, displayed minimal cellular infiltration and low collagen deposition, increased anti-inflammatory CD206 and decreased inflammatory CD86 levels. The M2-PCL nanofibers most effectively neutralized inflammatory chemokines, regulated the expression of inflammation-associated genes as well as anti-inflammatory genes, and showed strong immunomodulatory effects than the PCL, M0-PCL and M1-PCL nanofibers. STATEMENT OF SIGNIFICANCE: Different types of macrophage membrane-functionalized PCL nanofibers were successfully prepared and well characterized. They inherited the surface proteins imitating the source macrophages, and played an important role in limiting cellular infiltration and collagen deposition. These different macrophages and their membrane-coated nanofibers (M0-PCL, M1-PCL and M2-PCL) behaved like their respective source cells. The M2 mimicking M2-PCL nanofibers effectively polarized macrophages to M2 phenotype and decreased the expression of inflammation-associated chemokines and promoted the anti-inflammation in vitro and in vivo, which is critical for tissue regeneration. The mice implanted with the bio-mimicking M2-PCL nanofibers effectively inhibited toll like receptors signaling induced NF-kB and IRF-5 and their target genes such as Edn-1, IL-6, iNOS, TNF-α, etc. compared to the PCL, and M0-PCL and M1-PCL macrophage membrane-coated nanofibers.

Physical forces are important cues in determining the development and the normal function of biological tissues. While forces generated by molecular motors have been widely studied, forces resulting from osmotic gradients have been less considered in this context. A possible reason is the lack of direct in-situ measurement methods that can be applied to cell and organ culture systems. Herein, novel kinds of FRET (resonance energy transfer)-based liposomal sensors are developed, so that their sensing range and sensitivity can be adjusted to satisfy physiological osmotic conditions. Several types of sensors are prepared, either based on PEGylated liposomes with steric stabilization and stealth property or on crosslinked liposomes capable of enduring relatively harsh environments for liposomes (e.g., in the presence of biosurfactants). The sensors are demonstrated to be effective in the measurement of osmotic pressures in pre-osteoblastic in-vitro cell culture systems by means of FRET microscopy. This development paves the way towards the in-situ sensing of osmotic pressures in biological culture systems. This article is protected by copyright. All rights reserved.

The macrophages take significant roles in homeostasis, phagocytosis of pathogenic organisms, and modulation of host defense and inflammatory processes. In this study, the enantiomeric poly-D-lysine (PDL) and poly-L-lysine (PLL) were conjugated to gold nanorods (AuNRs) to study their influence on the polarization of macrophages. The AuNRs capped with cetyl trimethyl ammonium bromide (CTAB) (AuNRs@CTAB) exhibited larger toxicity to macrophages when their concentration was higher than 50 μg/ml, whereas the AuNRs@PDL and AuNRs@PLL showed neglectable toxicity at the same concentration compared with the control. The AuNRs@PDL and AuNRs@PLL were internalized into the macrophages with a higher value than the AuNRs@CTAB as revealed by transmission electron microscopy (TEM) and inductively coupled plasma mass spectrometry (ICP-MS) characterization. Unlike the grafted PDL/PLL on flat substrates, the AuNRs@PDL and AuNRs@PLL were not able to polarize M0 macrophages to any other phenotype after internalization as confirmed by ELISA, flow cytometry, and fluorescence microscopy analysis. Nonetheless, the expression of M1 phenotype markers was reduced after the internalization of AuNRs@PDL and AuNRs@PLL by M1 macrophages. The assays of ELISA, flow cytometry, and reactive oxygen species levels exhibited decrease in inflammation of the M1 macrophages.

Infection can disturb the wound healing process and lead to poor skin regeneration, chronic wound, septicemia and even death. To combat the multi-drug resistance bacteria or fungi, it is urgent and necessary to develop advanced antimicrobial wound dressings. In this study, a composite hydrogel dressing composed of polyvinyl alcohol (PVA), agarose, glycerol and antibacterial hyperbranched polylysine (HBPL) was prepared by a freeze-thawing method. The hydrogel showed robust mechanical properties, and the HBPL in the hydrogel displayed effective and broad-spectrum antimicrobial properties to bacteria and fungi as well as biofilms. The composite hydrogel exhibited good biocompatibility with respect to the levels of cells, blood, tissue and main organs. In an animal experiment of an infected wound model, the hydrogel significantly eliminated the infection and accelerated the wound regeneration with better tissue morphology and angiogenesis. The hydrogel also successfully achieved scalable production of over 600 g with a yield over 90 %, suggesting the great potential for the application in practice.

Weak tissue adhesion remains a major challenge in clinical translation of microneedle patches. Mimicking the structural features of honeybee stingers, stiff polymeric microneedles with unidirectionally backward-facing barbs were fabricated and embedded into various elastomer films to produce self-interlocking microneedle patches. The spirality of the barbing pattern was adjusted to increase interlocking efficiency. In addition, the micro-bleeding caused by microneedle puncturing adhered the porous surface of the patch substrate to the target tissue via coagulation. In the demonstrative application of myocardial infarction treatment, the bioinspired microneedle patches firmly fixed on challenging beating hearts, significantly reduced cardiac wall stress and strain in the infarct, and maintained left ventricular function and morphology. In addition, the microneedle patch was minimally invasively implanted onto beating porcine heart in 10 minutes, free of sutures and adhesives. Therefore, the honeybee stinger-inspired microneedles could provide an adaptive and convenient means to implant patches for various medical applications. STATEMENT OF SIGNIFICANCE: Adhesion between tissue and microneedle patches with smooth microneedles is usually weak. We introduce a novel barbing method of fabricating unidirectionally backward facing barbs with controllable spirality on the microneedles on microneedle patches. The microneedle patches self-interlock on mechanically dynamic beating hearts, similar to honeybee stingers. The micro-bleeding and coagulation on the porous surface provide additional adhesion force. The microneedle patches attenuate left ventricular remodeling via mechanical support and are compatible with minimally invasive implantation.

Hydrogels are three-dimensional platforms that serve as substitutes for native extracellular matrix. These materials are starting to play important roles in regenerative medicine because of their similarities to native matrix in water content and flexibility. It would be very advantagoues for researchers to be able to regulate cell behavior and fate with specific hydrogels that have tunable mechanical properties as biophysical cues. Recent developments in dynamic chemistry have yielded designs of adaptable hydrogels that mimic dynamic nature of extracellular matrix. The current review provides a comprehensive overview for adaptable hydrogel in regenerative medicine as follows. First, we outline strategies to design adaptable hydrogel network with reversible linkages according to previous findings in supramolecular chemistry and dynamic covalent chemistry. Next, we describe the mechanism of dynamic mechanical microenvironment influence cell behaviors and fate, including how stress relaxation influences on cell behavior and how mechanosignals regulate matrix remodeling. Finally, we highlight techniques such as bioprinting which utilize adaptable hydrogel in regenerative medicine. We conclude by discussing the limitations and challenges for adaptable hydrogel, and we present perspectives for future studies., Graphical abstract Image 1, Highlights • Introduction of adaptable hydrogels with dynamic mechanical properties as 3D extracellular matrix. • Summary of reversible linkages based on supramolecular interactions and dynamic covalent bonds. • Discussion of how adaptable hydrogels provide dynamic mechanical microenvironment and influence cell behaviors and fate. • Overview of applications of adaptable hydrogel in regenerative medicine.

Spatial dimension of pores and interconnection in macroporous scaffolds is of particular importance in facilitating endogenous cell migration and bone tissue ingrowth. However, it is still a challenge to widely tune structure parameters of scaffolds by conventional methods because of inevitable pore geometrical deformation and poor pore interconnectivity. Here, the long-term in vivo biological performances of nonstoichiometric bioceramic scaffolds with different pore dimensions were assessed in critical-size femoral bone defect model. The 6% Mg-substituted wollastonite (CSi-Mg6) powders were prepared via wet-chemical precipitation and the scaffolds elaborately printed by ceramic stereolithography, displaying designed constant pore strut and tailorable pore height (200, 320, 450, 600 μm), were investigated thoroughly in the bone regeneration process. Together with detailed structural stability and mechanical properties were collaboratively outlined. Both μCT and histological analyses indicated that bone tissue ingrowth was retarded in 200 μm scaffolds in the whole stage (2–16 weeks) but the 320 μm scaffolds showed appreciable bone tissue in the center of porous constructs at 6–10 weeks and matured bone tissue were uniformly invaded in the whole pore networks at 16 weeks. Interestingly, the neo-tissue ingrowth was facilitated in the 450 μm and 600 μm scaffolds after 2 weeks and higher extent of bone regeneration and remodeling at the later stage. These new findings provide critical information on how engineered porous architecture impact bone regeneration in vivo. Simultaneously, this study shows important implications for optimizing the porous scaffolds design by advanced additive manufacture technique to match the clinical translation with high performance., Graphical abstract Image 1, Highlights • 6% Mg-substituted wollastonite (CSi-Mg6) bioceramic show appreciable bioactivity and mechanical strength. • Porous CSi-Mg6 scaffolds with precisely controlled pore dimensions are fabricated by ceramic stereolithography. • The favorable pore geometries facilitating neo-bone ingrowth into the center pores of scaffolds are decoded. • CAD-assisted stereolithography opens up opportunities for developing scaffolds with tailored pore architecture.

The degree of tissue injuries such as the level of scarring or organ dysfunction, and the immune response against them primarily determine the outcome and speed of healing process. The successful regeneration of functional tissues requires proper modulation of inflammation-producing immune cells and bioactive factors existing in the damaged microenvironment. In the tissue repair and regeneration processes, different types of biomaterials are implanted either alone or by combined with other bioactive factors, which will interact with the immune systems including immune cells, cytokines and chemokines etc. to achieve different results highly depending on this interplay. In this review article, the influences of different types of biomaterials such as nanoparticles, hydrogels and scaffolds on the immune cells and the modification of immune-responsive factors such as reactive oxygen species (ROS), cytokines, chemokines, enzymes, and metalloproteinases in tissue microenvironment are summarized. In addition, the recent advances of immune-responsive biomaterials in therapy of inflammation-associated diseases such as myocardial infarction, spinal cord injury, osteoarthritis, inflammatory bowel disease and diabetic ulcer are discussed.

As an alternative strategy to achieve the desired bone augmentation, tenting screw technology (TST) has considerably broadened the indications for implant treatment. Titanium tenting screws are typically used in TST to maintain the space for bone regeneration. However, a high degree of osteogenic integration complicate titanium tenting screw removal and impact the bone healing micro-environment. Previous efforts have been focused on modifying titanium surfaces to enhance osseointegration while ignoring the opposite process. Due to the vital role of bone marrow mesenchymal stem cells (BMSCs) in bone regeneration, it might be feasible to reduce osseointegration around titanium tenting screws by resisting the adhesion of BMSCs. Herein, poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was incorporated with a Ti surface in terms of surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The cell apoptosis analysis showed that the new surface would not induce the apoptosis of BMSCs. Then, the adhesive and proliferative behaviors of BMSCs on the surface were analyzed which indicated that the poly(PEGMA) surface could inhibit the proliferation of BMSCs through resisting the adhesion process. Furthermore, in vivo experiments revealed the presence of the poly(PEGMA) on the surface resulted in a lower bone formation and osseointegration compared with the Ti group. Collectively, this dense poly(PEGMA) surface of Ti may serve as a promising material for clinical applications in the future. STATEMENT OF SIGNIFICANCE: The poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was grafted onto a Ti surface by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The PEGMA surface could reduce the osteogenic integration by preventing the adhesion of cells, resulting in a lower pullout force of the modified implant and thereby desirable and feasible applications in dental surgery.

Branched polyethylene (B-PE) elastomer was investigated for its potential medical application as a tarsus construct. The in vitro results showed that the B-PE and processed B-PE films or scaffolds did not exhibit noticeable cytotoxicity to the NIH3T3 fibroblasts and human vascular endothelial cells (ECs). The B-PE scaffolds with a pore size of 280–480 µm were prepared by using a gelatin porogen-leaching method. The porous scaffolds implanted subcutaneously in rats exhibited mild inflammatory response, collagen deposition and fast fibrovascularization, suggesting their good biocompatibility. Quantitative real-time PCR analysis showed low expression of pro-inflammatory genes and up-regulated expressions of collagen deposition and vascularization-related genes, validating the results of historical evaluation in a molecular level. The B-PE scaffolds and Medpor controls were transplanted in rabbits with eyelid defects. The B-PE scaffolds exhibited a similar elastic modulus and provided desirable repair effects with mild fibrous capsulation, less eyelid deformities, and were well integrated with the fibrovascular tissue compared with the Medpor controls.

Spinal cord injury (SCI) is an overwhelming and incurable disabling event accompanied by complicated inflammation-related pathological processes, such as excessive reactive oxygen species (ROS) produced by the infiltrated inflammatory immune cells and released to the extracellular microenvironment, leading to the widespread apoptosis of the neuron cells, glial and oligodendroctyes. In this study, a thioketal-containing and ROS-scavenging hydrogel was prepared for encapsulation of the bone marrow derived mesenchymal stem cells (BMSCs), which promoted the neurogenesis and axon regeneration by scavenging the overproduced ROS and re-building a regenerative microenvironment. The hydrogel could effectively encapsulate BMSCs, and played a remarkable neuroprotective role

Myocardial infarction (MI) is still a major cause of mortality and morbidity worldwide. Elastomer cardiac patches have shown great potential in preventing left ventricle (LV) remodeling post-MI by providing mechanical support to the infarcted myocardium. Improved therapeutic outcomes are expected by mediating pathological processes in the necrosis phase, inflammation phase, and fibrosis phase, through orchestrated biological and mechanical treatments. In this study, a mechanically robust multifunctional cardiac patch integrating reactive oxygen species (ROS)-scavenging, anti-inflammatory, and pro-angiogenic capabilities was developed to realize the integrative strategy. An elastomeric polyurethane (PFTU) containing ROS-sensitive poly (thioketal) (PTK) and unsaturated poly (propylene fumarate) (PPF) segments was synthesized, which was further clicked with pro-angiogenic Arg-Glu-Asp-Val (REDV) peptides to obtain PFTU-g-REDV (PR), and was formulated into a macroporous patch containing rosuvastatin (PRR). The mechanical support and multifunctional effects of the patch were confirmed in a rat MI model in vivo compared to the patches with only mechanical support, leading to reduced cell apoptosis, suppressed local inflammatory response, alleviated fibrosis, and induced angiogenesis. The cardiac functions and LV morphology were also well maintained. These results demonstrate the advantages of the integrated and orchestrated treatment strategy in MI therapy.

Acute lung injury (ALI) is associated with excessive inflammatory response, leading to acute respiratory distress syndrome (ARDS) without timely treatment. A fewer effective drugs are available currently to treat the ALI/ARDS. Herein, a therapeutic nanoplatform with reactive oxygen species (ROS)-responsiveness was developed for the regulation of inflammation. Dexamethasone acetate (Dex) was encapsulated into poly(thioketal) polymers to form polymeric nanoparticles (NPs) (PTKNPs@Dex). The NPs were composed of poly(1,4-phenyleneacetonedimethylene thioketal) (PPADT) and polythioketal urethane (PTKU), in which the thioketal bonds could be cleaved by the high level of ROS at the ALI site. The PTKNPs@Dex could accumulate in the pulmonary inflammatory sites and release the encapsulated payloads rapidly, leading to the decreased ROS level, less generation of pro-inflammatory cytokines, and reduced lung injury and mortality of mice. RNA sequencing (RNA-seq) analysis showed that the therapeutic efficacy of the NPs was associated with the modulation of many immune and inflammation-linked pathways. These findings provide a newly developed nanoplatform for the efficient treatment of ALI/ARDS.

In women of reproductive age, severe injuries to the endometrium are often accompanied by endometrial scar formation or intrauterine adhesions (IUAs), which can result in infertility or miscarriage. Although many approaches have been used to treat severe IUAs, high recurrence rates and endometrial thinning have limited therapeutic efficiency. In this study, a collagen scaffold (CS) loaded with human umbilical cord-derived mesenchymal stem cells (UC-MSCs) was fabricated and applied for endometrial regeneration. The CS/UC-MSCs promoted human endometrial stromal cell proliferation and inhibited apoptosis in vitro through paracrine effects. In a model of endometrial damage, transplantation with the CS/UC-MSCs maintained normal luminal structure, promoted endometrial regeneration and collagen remodeling, induced intrinsic endometrial cell proliferation and epithelium recovery, and enhanced the expression of estrogen receptor α and progesterone receptor. An improved ability of the regenerated endometrium to receive embryos was confirmed. Together, our results indicate that the CS/UC-MSCs promoted endometrial structural reconstruction and functional recovery. Topical administration of the CS/UC-MSCs after trans-cervical resection of adhesions might prevent re-adhesion, promote endometrium regeneration and improve pregnancy outcomes for patients with severe IUAs. STATEMENT OF SIGNIFICANCE: Intrauterine adhesions due to severe endometrium injuries happen frequently in clinic and become one of the crucial reasons for women's infertility or miscarriage. Therefore, how to regenerate the damaged endometrium is a big challenge. In this study, a collagen scaffold (CS) loaded with human umbilical cord-derived mesenchymal stem cells (UC-MSCs) was fabricated and applied for endometrium regeneration. Herein, UC-MSCs, known for low immunogenicity and high proliferative potential, exhibit promising potential for endometrium regeneration; and collagen scaffolds provide suitable physical support. It was proved that transplantation with CS/UC-MSCs promoted endometrial regeneration and fertility restoration. It suggested that topical administration of CS/UC-MSCs in uterus could be a promising strategy for patients suffering severe intrauterine adhesion and infertility.

We have developed the new core-shell bioceramic CSi-Sr4@CaP-px microspheres with tuning porous shell layer so that the biodegradation of both CSi-Sr4 core and CaP shell is readily adjusted synergistically. This is for the first time, to the best of our knowledge, that the bioceramic scaffolds concerning gradient distribution and microstructure-tailoring design is available for tailoring biodegradation and ion release (bioactivity) to optimizing osteogenesis. Furthermore, it is possibly helpful to develop new bioactive scaffold system for time-dependent tailoring bioactivity and microporous structure to significantly enhance bone regeneration and repair applications, especially in some non-load-bearing arbitrary 3D anatomical bone and teeth defects.

The ability of repair and regeneration of tissues or organs has been significantly improved by using biomaterials-based constructs. Our previous studies found the regeneration of both articular cartilage and subchondral bone by implantation of a poly(lactide-co-glycolide) (PLGA)/fibrin gel/bone marrow stem cells (BMSCs)/(lipofectamine/pDNA-transforming growth factor (TGF)-β1) construct in vivo, without the step of pre-induced differentiation of the laden stem cells in vitro. To substantiate the ability to regenerate multi-types of tissues by the same constructs, in this study the constructs were implanted into three types of tissues or tissue defects in vivo, including subcutaneous fascia layer, and ear cartilage and eyelid tarsal plate defects. The ear cartilage and eyelid tarsal plate defects were fully regenerated 8 w post-implantation, showing a similar morphology to the corresponding native tissues. In the neo ear cartilage, abundant chondrocytes with obvious lacunas and cartilage-specific extracellular matrices (ECMs) were found. Neo eyelid tarsal plate with mature meibomian gland acinar units was regenerated. Furthermore, expressions of the ECMs-specific genes and proteins, as well as the cell behavior modulatory factors, Sry related HMG box 9 (Sox9) and TGF-β1 were significantly up-regulated in the regenerated ear cartilages and eyelid tarsal plate than those in the subcutaneously implanted constructs, which were filled with fibrocytes, inflammatory cells, obvious vascularization and slight ECMs deposition. These results confirm firmly the ability to regenerate multi-types of tissues by a stem cells-laden construct via adapting to the microenvironments of corresponding tissues.

The diabetic wound is easily to develop into a chronic wound because of the extremely serious and complex inflammatory microenvironment including biofilm formation, over-expressed reactive oxygen species (ROS), hypoxia and insufficiency of nitric oxide (NO) synthesis. In this work, a multifunctional hydrogel was designed and prepared by crosslinking hydrophilic poly(PEGMA-co-GMA-co-AAm) (PPGA) polymers with hyperbranched poly-L-lysine (HBPL)-modified manganese dioxide (MnO

The modulation of inflammation in tissue microenvironment takes an important role in cartilage repair and regeneration. In this study, a novel hybrid scaffold was designed and fabricated by filling a reactive oxygen species (ROS)-scavenging hydrogel (RS Gel) into a radially oriented poly(lactide-co-glycolide) (PLGA) scaffold. The radially oriented PLGA scaffolds were fabricated through a temperature gradient-guided phase separation and freeze-drying method. The RS Gel was formed by crosslinking the mixture of ROS-responsive hyperbranched polymers and biocompatible methacrylated hyaluronic acid (HA-MA). The hybrid scaffolds exhibited a proper compressive modulus, good ROS-scavenging capability, and cell compatibility.In vivotests showed that the hybrid scaffolds significantly regulated inflammation and promoted regeneration of hyaline cartilage after they were implanted into full-thickness cartilage defects in rabbits for 12 w. In comparison with the PLGA scaffolds, the neo-cartilage in the hybrid scaffolds group possessed more deposition of glycosaminoglycans and collagen type II, and were well integrated with the surrounding tissue.

Cellular metabolism plays a major role in the regulation of inflammation. The inflammatory macrophages undergo a wide-range of metabolic rewriting due to the production of significant amount of itaconate metabolite from cis-aconitate in the tricarboxylic acid cycle. This itaconate molecule has been recently described as a promising immunoregulator. However, its function and mode of action on macrophages and tissue repair and regeneration are yet unclear. Herein, the itaconate-derivative dimethyl itaconate (DMI) suppresses the IL-23/IL-17 inflammatory axis-associated genes and promotes antioxidant nuclear factor erythroid 2-related factor 2 target genes. The poly-e-caprolactone (PCL)/DMI nanofibers implanted in mice initially maintain inflammation by suppressing anti-inflammatory activity and particular inflammation, while at later stage promotes anti-inflammatory activity for an appropriate tissue repair. Furthermore, the PCL/DMI nanofiber patches show an excellent myocardial protection by reducing infarct area and improving ventricular function via time-dependent regulation of myocardium-associated genes. This study unveils potential DMI macrophage modulatory functions in tissue microenvironment and macrophages rewriting for proper tissue repair.

Osteochondral defect refers to the damage of cartilage as well as subchondral bone. Cartilage tissue engineering focusing on the regeneration of cartilage and disregarding the subchondral bone always leads to partial regeneration of the damage, resulting in poor mechanical and physiological properties. A scaffold suitable for in situ inductive regeneration of both types of tissues is urgently needed. In this study, a biphasic scaffold integrated by macro-porous fibrin and 3D-printed wollastonite (containing 8% MgSiO3 (CS-Mg8)) scaffolds, either preloaded with rabbit bone marrow mesenchymal stem cells (BMSCs) or not, were fabricated and used to repair osteochondral defects in vivo (full thickness osteochondral defects in rabbits, 4 mm in diameter and 4 mm in depth with bone marrow blood effusion). The fibrin scaffold had a pore size of 100–200 μm, and was degraded gradually and reached weight loss over 80% at 28 days. The presence of BMSCs could accelerate the degradation rate. BMSCs could well proliferate...

Tissue integration of orbital implants, following orbital enucleation treatment, represents a challenge for rapid fibrovascularization, long-time stability, anti-infection, and even induction of vascule regeneration. The objective of this study was to develop porous calcium-magnesium silicate materials, with good stability, bioactivity, and antibacterial potential as new orbital fillers. Three-dimensional (3D) diopside scaffolds (low dissolvability) were fabricated by direct ceramic ink writing assembly and then followed by one-step sintering at 1150 °C for 3 h. The pore wall of the scaffold was modified by another calcium-magnesium silicate, such as bredigite or akermanite, which dissolves quickly but shows greater angiogenic potential. These two Ca-Mg-silicates can be coated onto the pore strut, and the coating layers were observed to slowly dissolve in Tris buffer. The vascularization-favorable Cu ions, which had been doped into the bredigite or akermanite coating, could also be measured in the immersion medium. A primary angiogenic test in a panniculus carnosus muscle model in rabbit indicated that the Cu-doped bredigite and akermanite coatings were significantly beneficial for the neovascularization in the early stages. These results suggest that the diopside-based porous materials modified with functional coatings hold great potential for application in orbital reconstruction.

The dual functional implants of antibacteria and osteointegration are highly demanded in orthopedic and dentistry, especially for patients who suffer from diabetes or osteoporosis simultaneously. However, there is lack of the facile and robust method to produce clinically applicable implants with this dual function although coatings possessing single function have been extensively developed. Herein, hyperbranched poly-L-lysine (HBPL) polymers were covalently immobilized onto the alkali-heat treated titanium (Ti) substrates and implants by using 3-glycidyloxypropyltrimethoxysilane (GPTMS) as the coupling agent, which displayed excellent antibacterial activity against S. aureus and E. coli with an efficiency as high as 89.4% and 92.2% in vitro, respectively. The HBPL coating also significantly promoted the adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 cells in vitro. Furthermore, the results of a S. aureus infection rat model in vivo ulteriorly verified that the HBPL-modified screws had good antibacterial and anti-inflammatory abilities at an early stage of implantation and better osteointegration compared with the control Ti screws.

Bacterial infection is a major obstacle to the wound healing process. The hydrogel dressings with a simpler structure and good antibacterial and wound healing performance are appealing for clinical application. Herein, a robust hydrogel was synthesized from acrylamide (AM), acrylic acid (AA) and N,N′-methylene diacrylamide (MBA) via a redox initiating polymerization. The polymerization conditions were optimized to obtain the hydrogel with minimum unreacted monomers, which were 0.25% and 0.12% for AM and AA, respectively. The hydrogel had good mechanical strength, and could effectively resist damage by external forces and maintain a good macroscopic shape. It showed large water uptake capacity, and could post load a wide range of molecules via hydrogen bonding and electrostatic interaction. Loading of antibiotic doxycycline (DOX) enabled the hydrogel with good antibacterial activity against both Gram-positive bacteria and Gram-negative bacteria in vitro and in vivo. In a rat model of methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect wound, the DOX-loaded hydrogel showed good therapeutic effect. It could significantly promote the wound closure, increased the collagen coverage area, down-regulate the expressions of pro-inflammatory TNF-α and IL-1β factors, and up-regulate the expressions of anti-inflammatory IL-4 factor and CD31 neovascularization factor.

Selective exhaustion of over-expressed reactive oxygen species (ROS) is of great significance in the therapy of osteoarthritis (OA) due to the inhibiting effect on oxidative stress and inflammation. Herein, a ROS-scavenging and drug-release platform was prepared via encapsulating dexamethasone acetate (DA)-loaded ROS erasable poly(ethylene glycol)-b-polythioketal-b-poly(ethylene glycol) (PEG-PTK-PEG) micelles (PDM) into an injectable hydrogel. The hydrogel (HDH@PDM) was constructed by Schiff base reaction between hydrazide-grafted hyaluronic acid (HA-ADH) and aldehyde-modified dextran (Dex-ALH), achieving a self-healing property for viscosupplementation. The PDM imparted enhanced antioxidant capability to the hydrogel, which in turn endowed the PDM with prolonged retention and sustained DA release. The intraarticularly administered multifunctional injectable hydrogel potently diminished inflammation via depleting ROS and suppressing inflammatory cytokines as well as downregulating pro-inflammatory M1 macrophages ratio in a rat OA model. The developed therapeutic system significantly alleviated OA symptoms, embodying in excellent capability of preventing cartilage extracellular matrix degeneration with negligible toxicity in vivo.

Cell migration plays an important role in many physiological and biological processes , which is influenced by both physicochemical properties of surrounding matrix and signal gradient generated by neighboring/remote cells. Here we aim to develop a co-culture system of immune cells and smooth muscle cells (SMCs) based on the combination of Transwell and cell-responsive hydrogels. This model can be used to study the cell invasion into hydrogels in dynamic physiological conditions , with better mimicking of the in vivo microenvironment . Methacrylic anhydride-modified hyaluronic acid (MA-HA) macromolecules were crosslinked by matrix metalloproteinases (MMPs) sensitive peptides (MMP SP) to fabricate a cell-degradable hydrogel mimicking dynamic extracellular matrix (ECM). The migration of SMCs into the MMP-sensitive hydrogel was investigated under the existence of U937 cells, a type of macrophage-like cells. The invasion distance of SMCs in the MMP-sensitive hydrogels was much longer than that in the MMP-insensitive ones both in vitro and in vivo. The impact of hydrogel degradability and inductive signal gradient generated by U937 cells on cell invasion was compared, revealing that the degradability plays a major role in regulating cell invasion into the 3D hydrogels. Further mechanism investigation revealed that the expressions of cell migration-related genes and proteins were significantly up-regulated in the MMP-sensitive hydrogels compared to those in the MMP-insensitive hydrogels.

Cancer chemotherapy can be hindered by drug resistance which leads to lower drug efficiency. Here, we have developed a drug delivery system that tethers doxorubicin to the surface of gold nanorods via a pH-sensitive linkage (AuNRs@DOX), for a combined photothermal and chemical therapy for cancer. First, AuNRs@DOX is ingested by HepG2 liver cancer cells. After endocytosis, the acidic pH triggers the release of doxorubicin, which leads to chemotherapeutic effects. The gold nanorods are not only carriers of DOX, but also photothermal conversion agents. In the presence of an 808 nm near-infrared laser, AuNRs@DOX significantly enhance the cytotoxicity of doxorubicin via the photothermal effect, which induces elevated apoptosis of hepG2 cancer cells, leading to better therapeutic effects in vitro and in vivo., Highlights • Doxorubicin is tethered on AuNRs with a pH-triggered linkage. • AuNRs@DOX are ingested by cancer cells andrelease doxorubicin under acidic pH triggers. • AuNRs@DOX show excellent combinational chemo- and photothermal therapy effect.

Selective adhesion and migration of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. In this study, a uniform cell-resisting layer of poly(ethylene glycol) (PEG) with a density gradient of azide groups was generated on a substrate by immobilizing two kinds of PEG molecules in a gradient manner. A density gradient of alkynyl-functionalized Val-Ala-Pro-Gly (VAPG) peptides was then prepared on the PEG layer via click chemistry. The VAPG density gradient was characterized by fluorescence imaging, revealing the gradual enhancement of the fluorescent intensity along the substrate direction. The adhesion and mobility of SMCs were selectively enhanced on the VAPG density gradient, leading to directional migration toward the higher peptide density (up to 84%). In contrast, the adhesion and mobility of FIBs were significantly weakened. The net displacement of SMCs also significantly increased compared with that on tissue culture polystyrene (TCPS) and that of FIBs on the gradient. The mitogen-activated protein kinase (MAPK) signaling pathways related to cell migration were studied, showing higher expressions of functional proteins from SMCs on the VAPG-modified surface in a density-dependent manner. For the first time the selective adhesion and directional migration of SMCs over FIBs was achieved by an elaborative design of a gradient surface, leading to a new insight in design of novel vascular regenerative materials. Statement of Significance Selective cell adhesion and migration guided by regenerative biomaterials are extremely important for the regeneration of targeted tissues, which can avoid the drawbacks of incorrect and uncontrolled responses of tissue cells to implants. For example, selectivity of smooth muscle cells (SMCs) over fibroblasts (FIBs) is required to prevent adventitia fibrosis in vascular regeneration. Herein we prepare a uniform cell-repelling layer, on which SMCs-selective Val-Ala-Pro-Gly (VAPG) peptides are immobilized in a continuous manner. Selective adhesion and enhanced and directional migration of SMCs over FIBs are achieved by the interplay of cell-repelling layer and gradient SMCs-selective VAPG peptides, paving a new way for the design of novel vascular grafts with enhanced biological performance.

Intelligent colloidal particles have been widely used as carriers for delivery of bioactive molecules due to the ability of controlled release. However, attention is mainly paid to the effects of their payloads, whereas the impacts of carriers are largely ignored. In this study, photo-responsive polyethylene glycol (PEG) microparticles were fabricated by using 8-arm-PEG with terminal amine groups (8-arm-PEG-NH2) and a photo-cleavable cross-linker. Due to the cleavable CO bond in the cross-linker, under UV irradiation the PEG particles could be decomposed gradually, leading to particle swelling and eventual disappearance. The PEG particles could be internalized by smooth muscle cells and HepG2 cells, and located in lysosomes. Their intracellular photo-response induced significant decrease of cell viability and increase of reactive oxygen species level.

Although great strides have been made in medical technology, low back/neck pain and intervertebral disc degeneration initiated from disc degenerative disease remains a clinical challenge. Within the field of regenerative medicine therapy, we have sought to improve the biomechanical transformation of spinal fusion procedures conducted using biodegradable porous implants. Specifically, we have focused on developing mechanically strong bioceramic cages for spinal fusion and functional recovery. Herein, we fabricated the akermanite (AKE) ceramic-based porous cages using low-melting bioactive glass (BG) and 3D printing technology. The osteogenic cell adhesion on the cages was evaluated in vitro, and the spinal fusion was tested in the intervertebral disc trauma model. The results indicated that incorporation of 15% or 30% BG into AKE (i.e., AKE/BG15 and AKE/BG30) could enhance the compressive strength of bioceramic cages by 2- or 5-fold higher than the pure AKE cages (AKE/BG0). In comparison with porous β-tricalcium phosphate cages, the surface of AKE/BG15 and AKE/BG30 cages greatly promoted the growth and alkaline phosphatase expression of osteogenic cells. Histological and biomechanical analysis showed that the AKE/BG15 and AKE/BG30 readily stimulated the new bone tissue growth and improved the spinal biomechanics recovery. In the AKE/BG15 and AKE/BG30 cage groups, 4-6 of the rabbits demonstrated a successful fusion. In contrast, only 0-1 of the initial seeded AKE/BG0 and tricalcium phosphate cages resulted in fusion at 12 weeks post-operatively. In summary, the akermanite-based cages showed an increased bone regenerative effect within an intervertebral disc trauma model, and thus, provided a promising candidate for improving spinal fusion surgery.

Excessive reactive oxygen species (ROS) generated after myocardial infarction (MI) result in the oxidative injury in myocardium. Implantation of antioxidant biomaterials, without the use of any type of drugs, is very appealing for clinical translation, leading to the great demand of novel biomaterials with high efficiency of ROS elimination. In this study, a segmented polyurethane (PFTU) with a high density of ROS-scavenging backbone units is synthesized by the reaction of poly(thioketal) dithiol (PTK) and poly(propylene fumarate) diol (PPF) (soft segments), thioketal diamine (chain extender), and 1,6-hexamethylene diisocyanate (HDI). Its chemical structure is verified by gel permeation chromatography (GPC), 1 H nuclear magnetic resonance (1 H NMR) spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. The electrospun composite PFTU/gelatin (PFTU/Gt) fibrous patches show good antioxidation capacity and ROS-responsive degradation in vitro. Implantation of the PFTU/gelatin patches on the heart tissue surface in MI rats consistently decreases the ROS level, membrane peroxidation, and cell apoptosis at the earlier stage, which are not observed in the non-ROS-responsive polyurethane patch. Inflammation and fibrosis are also reduced in the PFTU/gelatin-treated hearts, resulting in the reduced left ventricular remodeling and better cardiac functions postimplantation for 28 d.

Natural extracellular matrix governs cells providing biomechanical and biofunctional outstanding properties, despite being porous and mostly made of soft materials. Among organs, specific tissues present specialized macro-architectures. For instance, hepatic lobules present radial organization, while vascular sinusoids are branched from vertical veins, providing specific biofunctional features. Therefore, it is imperative to mimic such structures while modeling tissues. So far, there is limited capability of coupling oriented macro-structures with interconnected micro-channels in programmable long-range vertical and radial sequential orientations. Herein, a three-directional ice crystal elongation (3DICE) system is presented to code geometries in cryogels. Using 3DICE, guided ice crystals growth templates vertical and radial pores through bulky cryogels. Translucent isotropic and anisotropic architectures of radial or vertical pores are fabricated with tunable mechanical response. Furthermore, 3D combinations of vertical and radial pore orientations are coded at the centimeter scale. Cell morphological response to macro-architectures is demonstrated. The formation of endothelial segments, CYP450 activity, and osteopontin expression, as liver fibrosis biomarkers, present direct response and specific cellular organization within radial, linear, and random architectures. These results unlock the potential of ice-templating demonstrating the relevance of macro-architectures to model tissues, and broad possibilities for drug testing, tissue engineering, and regenerative medicine., The authors are grateful for the Portuguese Foundation for Science and Technology (FCT) distinction attributed to R. F. Canadas (SFRH/ BD/92565/2013), and to J. M. Oliveira (IF/00423/2012, IF/01285/ 2015). R. F. Canadas is also thankful to FCT, Fundo Europeu de Desenvolvimento Regional (FEDER), and Programa Operacional Competitividade e Internacionalizaç˜ao (POCI) for funding the B-Liver Project (PTDC/EMD-EMD/29139/2017). The authors are also thankful to FCT for supporting the project Hierarchitech (M-ERA-NET/0001/2014) and for the funds provided under the 3 BioMeD project (JICAM/0001/2017). The authors acknowledge that this material and collaboration is based in part upon work supported by Luso-American Development Foundation (FLAD), 2016/CON15/CAN6). U. Demirci is also grateful for the Canary Center at Stanford for Cancer Early Detection Seed Award. The authors are also grateful for the support provided by Diana Bicho and Nicolas Cristini on scaffold characterization and cell culture, respectively.

Osteoarthritis (OA) is a common chronic inflammatory disease in the joints. It is one of the leading causes of disability with increasing morbidity, which has become one of the serious clinical issues. Current treatments would only provide temporary relief due to the lack of early diagnosis and effective therapy, and thus the replacement of joints may be needed when the OA deteriorates. Although the intra-articular injection and oral administration of drugs are helpful for OA treatment, they are suffering from systemic toxicity, short retention time in joint, and insufficient bioavailability. Nanomedicine is potential to improve the drug delivery efficiency and targeting ability. In this focused progress review, the particle-based drug loading systems that can achieve targeted and triggered release are summarized. Stimuli-responsive nanocarriers that are sensitive to endogenous microenvironmental signals such as reactive oxygen species, enzymes, pH, and temperature, as well as external stimuli such as light for OA therapy are introduced in this review. Furthermore, the nanocarriers associated with targeted therapy and imaging for OA treatment are summarized. The potential applications of nanotherapies for OA treatment are finally discussed.

Multilayers incorporated with stimuli-responsive substances by means of layer-by-layer (LbL) self-assembly are much attractive due to the advantages of stimuli-responsiveness and potential applications in different fields. In this study, pyrenemethyl acrylate (PA) was synthesized, and was copolymerized with acrylic acid (AA) to obtain the amphiphilic and photodegradable P(PA-co-AA) polymers with a PA:AA molar ratio of 1.3:3, and an average molecular weight of 6.9 kDa and polydispersity index of 1.04. They formed micelles spontaneously when dispersed in aqueous solution with a size of 27.5 nm in a dry state and 136.6 nm in a wet state. The micelles were readily decomposed to form aggregates as a result of the cleavage of the pyrenemethyl ester bonds under UV-irradiation. UV-responsive micelles-containing multilayers were prepared by LbL self-assembly of the UV-responsive micelles and polyallylamine hydrochloride (PAH). UV-irradiation of the multilayers resulted in the decomposition of micelles, leading to larger surface roughness, and enhanced swelling ratio and wettability of the multilayers. In vitro culture of A549 and HepG2 cells showed significantly better adhesion at 4 h on the UV-illuminated multilayers, whereas the cell proliferation was not affected until 5 d. Fil: Zhang, Haolan. Zhejiang University; China Fil: Wang, Danyu. Zhejiang University; China Fil: Lin, Xue. Zhejiang University; China Fil: Politakos, Nikolaos. Centro de Investigación Cooperativa en Biomateriales; España Fil: Tuninetti, Jimena Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Centro de Investigación Cooperativa en Biomateriales; España Fil: Moya, Sergio Enrique. Centro de Investigación Cooperativa en Biomateriales; España Fil: Gao, Changyou. Zhejiang University; China

Hyaluronic acid (HA)-based hydrogels have applied widely for biomedical applications due to its biocompatibility and biodegradability. However, the use of initiators or crosslinkers during the hydrogel formation may cause cytotoxicity and thereby impair the biocompatibility. Inspired by the crosslinking mechanism of fibrin gel, a novel HA-based hydrogel was developed via the in situ supramolecular assembly based on knob-hole interactions between fibrinogen and knob-grafted HA (knob-g-HA) in this study. The knob-grafted HA was synthesized by coupling knob peptides (GPRPAAC, a mimic peptide of fibrin knob A) to HA via Michael addition. Then the translucent fibrinogen/knob-g-HA hydrogels were prepared by simply mixing the solutions of knob-g-HA and fibrinogen at the knob/hole ratio of 1.2. The rheological behaviors of the fibrinogen/knob-g-HA hydrogels with the fibrinogen concentrations of 50, 100 and 200 mg/mL were evaluated, and it was found that the dynamic storage moduli (G′) were higher than the loss moduli (G″) over the whole frequency range for all the groups. The SEM results showed that fibrinogen/knob-g-HA hydrogels presented the heterogeneous mesh-like structures which were different from the honeycomb-like structures of fibrinogen/MA-HA hydrogels. Correspondingly, a higher swelling ratio was obtained in the groups of fibrinogen/knob-g-HA hydrogel. Finally, the cytocompatibility of fibrinogen/knob-g-HA hydrogels was proved by live/dead stainings and MTT assays in the 293T cells encapsulation test. All these results highlight the biological potential of the fibrinogen/knob-g-HA hydrogels for 3D cellular engineering., Graphical abstract Image 1, Highlights • Inspired by fibrin gel, a fibrinogen/knob-g-hyaluronic acid hydrogel was fabricated via “knob”-“hole” specific interaction. • The hydrogel showing good cytocompatibility was prepared under physiological condition without adding enzyme or crosslinker. • The “knob” - “hole” interaction gives it potential to prepare a hydrogel with good cytocompatibility in a mild and fast manner.

Nanoparticles (NPs) can have profound effects on cell biology. However, the potential adverse effects of gold nanoparticles (AuNPs) with different surface chirality and structures have not been elucidated. In this study, monolayers of poly(acryloyl- l ( d )-valine ( l ( d )-PAV) chiral molecules were anchored on the surfaces of gold nanocubes (AuNCs) and nanooctahedras (AuNOs), respectively. The l -PAV-AuNCs and d -PAV-AuNCs, or the l -PAV-AuNOs and d -PAV-AuNOs, had identical physicochemical properties in terms of size, morphology and ligand density except of the reverse molecular chirality on the particle surfaces, respectively. The l -PAV capped AuNCs and AuNOs exhibited larger cytotoxicity to A549 cells than the D-PAV coated ones, and the PAV-AuNOs had larger cytotoxicity than PAV-AuNCs when being capped with the same type of enantiomers, respectively. The cytotoxicity was positively correlated with the cellular uptake amount, and thereby the production of intracellular reactive oxygen species (ROS). Statement of Significance • Gold nanoparticles with different structure and surface chirality are fabricated. • The structure and surface chirality at the nanoscale can influence cytotoxicity and genotoxicity. • A new perspective on designing nanoparticles for drug delivery, bioimaging and diagnosis.

The adverse effect of airborne PM2.5 pollutes on human beings and the environment, most likely due to heavy metal leaching, has received extensive attention recently. It is urgently required to develop a simple and effective method to suppress the toxicity of PM2.5 pollutes. In this study, the heavy metal content of PM2.5 pollutes around Zhejiang university were firstly identified. Their cytotoxicity was confirmed, by inducing significantly enhanced intracellular reactive oxygen species level. Poly(N-isopropylacrylamide) (PNIPAM) submicron hydrogel particles with tunable crosslinking densities and thermo-responsive swelling/shrinking properties were then prepared by adjusting the crosslinking density. Anti-oxidant drug melatonin (MLT) was encapsulated into the obtained PNIPAM nanogel particles with the drug loading efficiency larger than 50%, achieving thermo-responsive drug release profile. The PNIPAM/MLT particles had a strong ability to reduce the cytotoxicity to Raw264.7 cells induced by the extractant of PM2.5 pollutes, as well as to suppress the intracellular reactive oxygen species (ROS) level and secretion of tumor necrosis factor alpha (TNF-α), especially when the cells were treated under 25°C for 3h after ingestion of the PNIPAM/MLT particles. This concept-proving study demonstrates the potential to use the thermo-responsive PNIPAM/MLT particles to suppress the toxicity of airborne PM2.5 pollutes, which is a paramount requirement for human health.

In order to improve neurite outgrowth on the in situ formed hyaluronic acid–based hydrogel, furan and methacrylate groups were grafted on hyaluronic acid successively. Furthermore, a laminin-derived peptide CQAASIKVAV was covalently immobilized via the Michael addition. The furan- and peptide-modified hyaluronic acid was then cross-linked in situ by mixing with bismaleimide poly(ethylene glycol) at 37 °C to obtain a bioactive hyaluronic acid–based hydrogel. The hyaluronic acid derivatives were characterized by 1H NMR and Fourier transform infrared spectroscopy. The gelation, swelling, and mechanical property of the hydrogels were analyzed. The modulus of the hydrogel could be tuned by changing furan substitution degree, while the peptide concentration could be changed by the ratio of furan- and peptide-modified hyaluronic acid with hyaluronic acid–furan. In vitro culture of PC12 cells showed that the longest neurite outgrowth appeared on the hyaluronic acid–poly(ethylene glycol) hydrogel with the highest peptide content (the substitution degree of peptide in furan- and peptide-modified hyaluronic acid was 23 %) and a lower threshold modulus of 4.5 kPa. The furan and methacrylate-functionalized hyaluronic acid provides a versatile platform for diverse functionalization and can be used for modulation of other cell behaviors as well.

Migration and differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) is an important biological process in tissue regeneration. Nanostructured titanium materials are believed to play a fundamental role in dental and orthopedic applications. However, the protein adsorption on nanostructured titanium materials and its correlation with the subsequent cell behaviors have not been studied. In this work, the titania nanotube arrays with different tubular diameters ranging from 27.3 to 88.2 nm were fabricated by using an electrochemical etching method. The adsorbed amounts and types of cell adhesion-related proteins (such as fibronectin, vitronectin, and laminin) from serum were investigated, revealing that these proteins were preferred to bind onto the surface with nanotubes of a smaller diameter. Adhesion and migration of BMSCs were studied as a function of different nanotube diameters in the presence or absence of serum proteins. Compared with the nanotube surface with a larger tubular diameter (88.2 nm), the surface with a smaller one could better support BMSCs in terms of adhesion and spreading. The pre-adsorbed serum proteins significantly enhanced adhesion and migration abilities of BMSCs. However, the adequate interactions between cells and serum proteins on the nanotubes surface with smallest nanotubes in diameter weakened cell mobility. Arrangement of cytoskeleton and expressions of key genes and proteins were studied, revealing that the nanostructured surfaces and pre-adsorbed proteins jointly mediated the adhesion and migration of BMSCs.

Reactive oxygen species (ROS) play an important role in the pathogenesis of numerous diseases including atherosclerosis, diabetes, inflammation and myocardial infarction (MI). In this study, a ROS-responsive biodegradable elastomeric polyurethane containing thioketal (PUTK) linkages was synthesized from polycaprolactone diol (PCL-diol ), 1,6-hexamethylene diisocyanate (HDI), and ROS-cleavable chain extender. The PUTK was electrospun into fibrous patches with the option to load glucocorticoid methylprednisolone (MP), which were then used to treat MI of rats in vivo. The fibrous patches exhibited suitable mechanical properties and high elasticity. The molecular weight of PUTK was decreased significantly after incubation in 1 mM H2O2 solution for 2 weeks due to the degradation of thioketal bonds on the polymer backbone. Both the PUTK and PUTK/MP fibrous patches showed good antioxidant property in an oxidative environment in vitro. Implantation of the ROS-responsive polyurethane patches in MI of rats in vivo could better protect cardiomyocytes from death in the earlier stage (24 h) than the non ROS-responsive ones. Implantation of the PUTK/MP fibrous patches for 28 days could effectively improve the reconstruction of cardiac functions including increased ejection fraction, decreased infarction size, and enhanced revascularization of the infarct myocardium.

Gold nanorods (GNRs) with longitudinal surface plasmon resonance (LSPR) peaks in second near-infrared (NIR-II) window have attracted a great amount of attention as photothermal transducer because of their inherently excellent photothermal transition efficiency, high biocompatibility and versatile surface functionalization. One key question for the application of these GNRs against tumors in vivo is which size/shape and surface ligand conjugation are promising for circulation and tumor targeting. In this study, we prepared a series of gold nanorods (GNRs) of similar aspect ratio and LSPR peaks, and thus similar photothermal transfer efficiency under irradiation of 980 nm laser, but with tunable size in width and length. The obtained GNRs were subjected to surface modification with PEG and tumor targeting ligand lactoferrin. With these tailor-designed GNRs in hand, we have the chance to study the impact of dimension and surface property of the GNRs on their internalization via tumor cells, photothermal cytotoxicity in vitro, blood circulation and tissue distribution pattern in vivo. As a result, the GNRs with medium size (70 nm in length and 11.5 nm in width) and surface PEG/LF modification (GNR70@PEG-LF) exhibit the fastest cell internalization via HepG2 cells and best photothermal outcome in vitro. The GNR70@PEG-LF also display long circulation time and the highest tumor accumulation in vivo, due to the synergetic effect of surface coating and dimension. Finally, tumor ablation ability of the GNRs under irradiation of 980 nm light were validated on mice xenograft model, suggesting their potential photothermal therapy against cancer in NIR-II window.

Capture of endothelial progenitor cells (EPCs) in situ has been considered as a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and implant devices. In this study, a CD133+ EPC capture surface was fabricated by grafting CD133 antibody (a more specific EPC surface marker than CD34) and Arg-Glu-Asp-Val (REDV) peptideon the methacrylate-grafted hyaluronic acid (MA-HA) and heparin-hybridized (MA-HA&Heparin) resisting layer. Vascular endothelial growth factor (VEGF) was further conjugated to the immobilized heparin. This engineered surface showed good hemocompatibility and significantly higher ability of capturing CD133+ EPCs from human peripheral blood mononuclear cells (PBMCs) and obviously upregulated the expression of endothelial cell (EC) marker genes of EPCs such as VEGF receptor 2 (VEGFR2), CD31, VE-cadherin, and von Willebrand factor (vWF), facilitating the differentiation of EPCs into ECs. The dramatically enhanced EPC proliferation on this surface was dependent on the integrin-VEGFR synergistic signaling, as ERK1/2 phosphorylation was only significantly enhanced on the REDV and VEGF co-immobilized surface. This study highlights a new surface coating strategy for blood-contact materials based on the specific EPC capturing and rapid endothelialization. STATEMENT OF SIGNIFICANCE: Capture of endothelial progenitor cells (EPCs) in situ is a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and scaffolds. More specific capture of EPCs by targeting CD133 rather than CD34 can better reduce the risk of inflammation and restenosis. On the other hand, an appropriate microenvironment for EPC proliferation is equally important for endothelialization, which is rarely considered by the existing EPC capture strategies. In this study, the capture ratio of EPCs was significantly increased by simultaneously grafting CD133 antibody and VEGF on a MA-HA and heparin-hybridized antifouling layer. Further, proliferation of EPCs after capture was significantly promoted by grafting VEGF and REDV peptide through the integrin-VEGFR synergistic signaling. This study highlights a new strategy for the surface coating of blood-contact materials based on specific EPC capture and rapid endothelialization.

Although the negative impacts of particulate matter (PM2.5) on human health have been well recognized, very few efforts have been paid to find new strategies to suppress the toxicity of PM2.5 both in vitro and in vivo. In this study, reactive oxygen species (ROS)-responsive nanoparticles made of poly(1,4-phenleneacetonedimethylene thioketal) (PPADT) were used to load immunosuppressant drug tacrolimus (FK506) with a drug loading efficiency of around 44%. The PPADT particles showed very good ROS-responsiveness and were degraded in an oxidation environment. By exhausting intracellular ROS, they could effectively suppress the toxicity of A549 lung epithelial cells and RAW264.7 macrophages induced by the PM2.5 particulates collected from three different regions in China. Moreover, the inflammatory response of PM2.5 could also be significantly suppressed, showing much better performance than the free FK506 drugs both in vitro and in vivo. This concept-proving research demonstrates the promising application for the ROS-sensitive drug release particles in dispelling the toxicity and suppressing the inflammation of PM2.5 pollutes, shedding a new light in the design and applications of stimuli-responsive systems in the bionanotechnology and healthcare fields.

Cell migration in three-dimensional environment is extremely important for tissue regeneration and other biological processes. In this work, a model system was developed to study how endothelial cells (ECs) migrate into photo-responsive hydrogels under the presence of pro-inflammatory macrophages. The hydrogel was synthesized from hyaluronic acid grafted with coumarin and methacrylate moieties by both carbon–carbon covalent linking and coumarin dimerization under UV irradiation at 365 nm. The structure of the hydrogel was conveniently modulated by UV irradiation at 254 nm to decompose the coumarin dimers, leading to the significant decrease of modulus and increase of swelling ratio and mesh size. Under the presence of M1 macrophages, ECs were induced to migrate into the hydrogels with a different degree. A significant larger net displacement of ECs was found in the softer hydrogel obtained by irradiation with UV at 254 nm than in the stiffer original one at day 7.

Decellularization treatment has been widely used to decrease the potential immunogenicity and improve the anticalcification properties of bio-derived materials, which may be utilized as an alternative method for the preparation of bioprosthetic heart valves. However, the excessive decellularization treatments will deteriarate the properties of heart valves. Among the decellularizaton parameters, detergent concentration and processing time are considered as those of the most key factors. Therefore, it should be meaningful to balance the decellularization efficiency and properties of bioprosthetic heart valves by optimizing the detergent concentration and processing time. In this study, three groups of the decellularized heart valves treated by sodium deoxycholate (SD) with different concentration and processing time were investigated through histological, biochemical, and mechanical analysis. Similar decellularization efficiency can be concluded through histological staining, DNA and α-Gal quantification results. Extracellular matrix contents quantification and tensile test results revealed that there is no obvious difference among the three decellularized heart valves. in vitro cytotoxicity assay showed that the remnant detergent is not enough to cause cell death, which indicated that the decellularized porcine aortic heart valves may be suitable for further in vivo research. In conclusion, Triton X-100/SD may be a suitable protocol used for heart valves decellularization. And it is feasible to vary the detergent processing time by changing the detergent concentration without compromising the decellularization efficiency.

The biodegradable polymer microparticles with different surface morphology and chemical compositions may influence significantly the behaviors of cells, and thereby further the performance of tissue regeneration in vivo. In this study, multi-stage hierarchical textures of poly(D,L-lactic-co-glycolide) (PLGA)/PLGA-b -PEG (poly(ethylene glycol)) microspheres with a diameter as large as 50–100 μm are fabricated based on interfacial instability of an emulsion. The obtained fuzzy structures on the microspheres are sensitive to annealing, which are changed gradually to a smooth one after treatment at 37 °C for 6 d or 80 °C for 1 h. The surface microstructures that are chemically dominated by PEG can be stabilized against annealing by dopamine deposition. By the combination use of annealing and dopamine deposition, a series of microspheres with robust surface topologies are facilely prepared. The fuzzy microstructures and dopamine deposition show a synergetic role to enhance cell-material interaction, leading to a larger number of adherent bone marrow-derived mesenchymal stem cells (BMSCs), A549 and MC 3T3 cells. The fuzzy microspheres with dopamine deposition can significantly promote bone regeneration 12 w post surgery in vivo, as revealed by micro-CT, histological, western blotting and RT-PCR analyses.