Search

Many wild type Pseudomonas strains have the potential to contribute to the valorization of lignin in future biorefineries. Through a robust aromatic catabolism, i.e., biofunneling capacity, they can ease the inherent aromatic heterogeneity found in lignin hydrolysates and accumulate naturally marketable biopolymers like mcl-polyhydroxyalkanoate (mcl-PHA) under nitrogen limitation. Besides a comparative strain evaluation, we present fundamental research on the funneling of aromatic mixtures under specific bioprocess conditions to improve biocatalytic lignin valorization. For the most robust and best performing strain, P. putida KT2440, we improve the mcl-PHA accumulation from a defined aromatic mixture of p-coumarate, ferulate, and benzoate under technically relevant conditions by up to 40% by tailoring the nitrogen and oxygen supply. The highest mcl-PHA concentration (582 +/- 41 mg L-1) was obtained for a C/N ratio of 60 for oxygen-unlimited conditions (oxygen transfer rate >20 mmol L-1 h(-1)). In contrast, aromatic intermediates accumulated under oxygen-limited conditions at oxygen transfer rates below 10 mmol L-1 h(-1). The experimental conditions were scalable into a 1L stirred tank bioreactor. This study contributes to deepening our understanding of the biocatalytic capability of promising Pseudomonas strains toward downstream microbial conversions of lignin aromatics for future biorefinery applications.

Biotechnology for biofuels 13(1), 1-18 (2020). doi:10.1186/s13068-020-01835-4, Published by BioMed Central, London

Biotechnology & bioengineering 119(2), 376-387 (2021). doi:10.1002/bit.27992, Published by Wiley, New York, NY [u.a.]

The sequence of the promoter used to drive expression of glcDEF operon in the engineered strain MFL185 in the original article was incorrect. As described here, we performed additional experiments that indicate expression of this operon was increased in MFL185, as intended. Ultimately, this error is immaterial with respect to the findings and conclusions reported in the original article.

The industrially relevant biopolymer poly-γ-glutamic acid (γ-PGA) is commonly synthesized using glycerol, citrate, and glutamic acid as carbon sources. In this study, two strains capable of utilizing glucose as sole carbon source for γ-PGA synthesis were constructed. Efficient γ-PGA production was achieved with derivatives of the well-investigated laboratory strain Bacillus subtilis 168, by replacing the native promoter of the PGA synthetase operon with the strong constitutive promoter Pveg or with the xylose-inducible promoter Pxyl. The carbon yield for γ-PGA increased by 129% to 0.131 C-mol C-mol−1 when using glucose as the sole substrate compared to the conventional carbon source mixture glycerol, citrate, and glutamic acid. The characterization of the produced γ-PGA demonstrated a time-dependent molecular weight of 1180–1850 kDa and a d -glutamic acid monomer content of 49–62%. To elucidate the consequences of γ-PGA production, we characterized the engineered strain by metabolomics. While the metabolite concentrations in the TCA cycle leading up to 2-oxoglutarate decreased in γ-PGA producer strains, the glutamic acid concentration was constant, despite the drastic increase in glutamic acid demand. The results are discussed in the context of metabolic regulation and future metabolic engineering strategies to enhance precursor supply for γ-PGA synthesis from glucose.

Establishing the pattern of abundance of molecules of interest during cell division has been a long-standing goal of cell cycle studies. In several systems, including the budding yeastSaccharomyces cerevisiae, cell cycle-dependent changes in the transcriptome are well studied. In contrast, few studies queried the proteome during cell division, and they are often plagued by low agreement with each other and with previous transcriptomic datasets. There is also little information about dynamic changes in the levels of metabolites and lipids in the cell cycle. Here, for the first time in any system, we present experiment-matched datasets of the levels of RNAs, proteins, metabolites, and lipids from un-arrested, growing, and synchronously dividing yeast cells. Overall, transcript and protein levels were correlated, but specific processes that appeared to change at the RNA level (e.g., ribosome biogenesis), did not do so at the protein level, and vice versa. We also found no significant changes in codon usage or the ribosome content during the cell cycle. We describe an unexpected mitotic peak in the abundance of ergosterol and thiamine biosynthesis enzymes. Although the levels of several metabolites changed in the cell cycle, by far the most significant changes were in the lipid repertoire, with phospholipids and triglycerides peaking strongly late in the cell cycle. Our findings provide an integrated view of the abundance of biomolecules in the eukaryotic cell cycle and point to a coordinate mitotic control of lipid metabolism.

Cydistinae are a rare monogeneric beetle lineage from Asia with a convoluted history of classification, historically placed in various groups within the series Elateriformia. However, their position has never been rigorously tested. To resolve this long-standing puzzle, we are the first to present sequences of two nuclear and two mitochondrial markers for four species of Cydistinae to determine their phylogenetic position. We included these sequences in two rounds of analyses: one including a broad Elateriformia dataset to test placement at the superfamily/family level, and a second, including a richer, targeted sampling of presumed close relatives. Our results strongly support Cydistinae as sister to Phengodidae in a clade with Rhagophthalmidae. Based on our molecular phylogenetic results and examination of morphological characters, we hereby transfer the formerly unplaced Cydistinae into Phengodidae and provide diagnoses for the newly circumscribed Phengodidae, Cydistinae and Cydistus. Since both Phengodidae and Rhagophthalmidae have bioluminescent larvae and strongly neotenic females, similar features can be hypothesized for Cydistinae. Additionally, Cydistus minor is transferred to the new genus Microcydistus.

The elm zigzag sawfly, Aproceros leucopoda Takeuchi (Hymenoptera: Argidae), was reported for the first time in North America during the summer of 2020. Characteristic zigzag defoliation was reported in the province of Québec, Canada, on the community science website, iNaturalist. Field trips conducted to the site resulted in the collection of live specimens (a few larvae and a cocoon from which an adult emerged) and onsite observation of diagnostic defoliation and empty cocoons, confirming the presence of this exotic species in Canada. Subsequent inspection of elm trees by naturalists and scientists in the south of the province led to the conclusion that the species is more widely distributed than first expected and that the invasion is not localised to a small area. Preliminary genetic data pointed to a possible European origin of the Canadian population, but conclusive assignment to source will require examination of more specimens and the collection of reference sequences from different European and Asian populations. This is a good example of the importance of community science in the detection of new invasive species.

Volume 86, no. 21, 2020, e01665-20, . Readers should note that when the authors created the deletion mutant of PP\_2675, they deleted the entire region between the gene’s start and stop codons. However, this also deleted the DNA that codes for the first 14

Pollution from ethylene glycol, and plastics containing this monomer, represent a significant environmental problem. The investigation of its microbial metabolism therefore provides insights into the environmental fate of this pollutant and also enables its utilization as a carbon source for microbial biotechnology. Here, we reveal the genomic and metabolic basis of ethylene glycol metabolism in Pseudomonas putida KT2440. Although this strain cannot grow on ethylene glycol as sole carbon source, it can be used to generate growth-enhancing reducing equivalents upon co-feeding with acetate. Mutants that utilize ethylene glycol as sole carbon source were isolated through adaptive laboratory evolution. Genomic analysis of these mutants revealed a central role of the transcriptional regulator GclR, which represses the glyoxylate carboligase pathway as part of a larger metabolic context of purine and allantoin metabolism. Secondary mutations in a transcriptional regulator encoded by PP_2046 and a porin encoded by PP_2662 further improved growth on ethylene glycol in evolved strains, likely by balancing fluxes through the initial oxidations of ethylene glycol to glyoxylate. With this knowledge, we reverse engineered an ethylene glycol utilizing strain and thus revealed the metabolic and regulatory basis that are essential for efficient ethylene glycol metabolism in P. putida KT2440.

The insect order Hymenoptera originated during the Permian nearly 300 Mya. Ancestrally herbivorous hymenopteran lineages today make up the paraphyletic suborder ‘Symphyta’, which encompasses c. 8200 species with very diverse host-plant associations. We use phylogeny-based statistical analyses to explore the drivers of diversity dynamics within the ‘Symphyta’, with a particular focus on the hypothesis that diversification of herbivorous insects has been driven by the explosive radiation of angiosperms during and after the Cretaceous. Our ancestral-state estimates reveal that the first symphytans fed on gymnosperms, and that shifts onto angiosperms and pteridophytes – and back – have occurred at different time intervals in different groups. Trait-dependent analyses indicate that average net diversification rates do not differ between symphytan lineages feeding on angiosperms, gymnosperms or pteridophytes, but trait-independent models show that the highest diversification rates are found in a few angiosperm-feeding lineages that may have been favoured by the radiations of their host taxa during the Cenozoic. Intriguingly, lineages-through-time plots show signs of an early Cretaceous mass extinction, with a recovery starting first in angiosperm-associated clades. Hence, the oft-invoked assumption of herbivore diversification driven by the rise of flowering plants may overlook a Cretaceous global turnover in insect herbivore communities during the rapid displacement of gymnosperm- and pteridophyte-dominated floras by angiosperms.

Besides enzymatic conversions, many eukaryotic metabolic pathways also involve transport proteins that shuttle molecules between subcellular compartments, or into the extracellular space. Fungal itaconate production involves two such transport steps, involving an itaconate transport protein (Itp), and a mitochondrial tricarboxylate transporter (Mtt). The filamentous ascomycete Aspergillus terreus and the unicellular basidiomycete Ustilago maydis both produce itaconate, but do so via very different molecular pathways, and under very different cultivation conditions. In contrast, the transport proteins of these two strains are assumed to have a similar function. This study aims to investigate the roles of both the extracellular and mitochondrial transporters from these two organisms by expressing them in the corresponding U. maydis knockouts and monitoring the extracellular product concentrations. Both transporters from A. terreus complemented their corresponding U. maydis knockouts in mediating itaconate production. Surprisingly, complementation with At_MfsA from A. terreus led to a partial switch from itaconate to (S)-2-hydroxyparaconate secretion. Apparently, the export protein from A. terreus has a higher affinity for (S)-2-hydroxyparaconate than for itaconate, even though this species is classically regarded as an itaconate producer. Complementation with At_MttA increased itaconate production by 2.3-fold compared to complementation with Um_Mtt1, indicating that the mitochondrial carrier from A. terreus supports a higher metabolic flux of itaconic acid precursors than its U. maydis counterpart. The biochemical implications of these differences are discussed in the context of the biotechnological application in U. maydis and A. terreus for the production of itaconate and (S)-2-hydroxyparaconate.

The question of what determines whether cells are big or small has been the focus of many studies because it is thought that such determinants underpin the coupling of cell growth with cell division. In contrast, what determines the overall pattern of how cell size is distributed within a population of wild type or mutant cells has received little attention. Knowing how cell size varies around a characteristic pattern could shed light on the processes that generate such a pattern and provide a criterion to identify its genetic basis. Here, we show that cell size values of wild typeSaccharomyces cerevisiaecells fit a gamma distribution, in haploid and diploid cells, and under different growth conditions. To identify genes that influence this pattern, we analyzed the cell size distributions of all single-gene deletion strains inSaccharomyces cerevisiae.We found that yeast strains which deviate the most from the gamma distribution are enriched for those lacking gene products functioning in gene expression, especially those in transcription or transcription-linked processes. We also show that cell size is increased in mutants carrying altered activity substitutions in Rpo21p/Rpb1, the largest subunit of RNA polymerase II (Pol II). Lastly, the size distribution of cells carrying extreme altered activity Pol II substitutions deviated from the expected gamma distribution. Our results are consistent with the idea that genetic defects in widely acting transcription factors or Pol II itself compromise both cell size homeostasis and how the size of individual cells is distributed in a population.

Frontiers in genetics 11, 637738 (2021). doi:10.3389/fgene.2020.637738, Published by Frontiers Media, Lausanne

Dascillidae are a species-poor beetle group with a scarce fossil record. Here, we describe Baltodascillus serraticornis gen. et sp. nov. based on a well-preserved specimen from Eocene Baltic amber. It differs from all known Dascillidae by its reduced mandibles. After studying the specimen using light microscopy and X-ray microtomography, we tentatively place this genus in the poorly defined subfamily Karumiinae based on the large eyes, serrate antennae, and lack of prosternal process. This is the first representative of the Dascillidae formally described from Baltic amber and the first described fossil member of the subfamily Karumiinae. We briefly discuss the problematic higher classification of Dascillidae, along with the morphology and biogeography of the group.

Strain engineering in biotechnology modifies metabolic pathways in microorganisms to overproduce target metabolites. To modify metabolic pathway activity in bacteria, gene expression is an effective and easy manipulated process, specifically the promoter sequence recognized by sigma factors. Promoter libraries are generated to scan the expression activity of different promoter sequences and to identify sequence positions that predict activity. To maximize information retrieval, a well-designed experimental setup is required. We present a computational workflow to analyse promoter libraries; by applying this workflow to seven libraries, we aim to identify critical design principles. The workflow is based on a Python Jupyter Notebook and covers the following steps: (i) statistical sequence analysis, (ii) sequence-input to expression-output predictions, (iii) estimator performance evaluation, and (iv) new sequence prediction with defined activity. The workflow can process multiple promoter libraries, across species or reporter proteins, and classify or regress expression activity. The strongest predictions in the sample libraries were achieved when the promoters in the library were recognized by a single sigma factor and a unique reporter system. A tradeoff between sample size and sequence diversity reduces prediction quality, and we present a relationship to estimate the minimum sample size. The workflow guides the user through analysis and machine-learning training, is open source and easily adaptable to include alternative machine-learning strategies and to process sequence libraries from other expression-related problems. The workflow is a contribution to increase insight to the growing application of high-throughput experiments and provides support for efficient strain engineering.AvailabilityFreely available on GitHub: https://qithub.com/iAMB-RWTH-Aachen/Exp2Ipynb and licensed under the terms of GPLv3.Contactulf.liebal@rwth-aachen.deSupplementary informationSupplementary data available in the Git folder.

Sufficient supply of oxygen is a major bottleneck in industrial biotechnological synthesis. One example is the heterologous production of rhamnolipids using Pseudomonas putida KT2440. Typically, the synthesis is accompanied by strong foam formation in the reactor vessel hampering the process. It is caused by the extensive bubbling needed to sustain the high respirative oxygen demand in the presence of the produced surfactants. One way to reduce the oxygen requirement is to enable the cells to use the anode of a bioelectrochemical system (BES) as an alternative sink for their metabolically derived electrons. We here used a P. putida KT2440 strain that interacts with the anode using mediated extracellular electron transfer via intrinsically produced phenazines, to perform heterologous rhamnolipid production under oxygen limitation. The strain P. putida RL-PCA successfully produced 30.4 &plusmn, 4.7 mg/L mono-rhamnolipids together with 11.2 &plusmn, 0.8 mg/L of phenazine-1-carboxylic acid (PCA) in 500-mL benchtop BES reactors and 30.5 &plusmn, 0.5 mg/L rhamnolipids accompanied by 25.7 &plusmn, 8.0 mg/L PCA in electrode containing standard 1-L bioreactors. Hence, this study marks a first proof of concept to produce glycolipid surfactants in oxygen-limited BES with an industrially relevant strain.

Ustilago maydis, member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillus terreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.

With its ability to catabolize a wide variety of carbon sources and a growing engineering toolkit, Pseudomonas putida KT2440 is emerging as an important chassis organism for metabolic engineering. Despite advances in our understanding of the organism, many gaps remain in our knowledge of the genetic basis of its metabolic capabilities. The gaps are particularly noticeable in our understanding of both fatty acid and alcohol catabolism, where many paralogs putatively coding for similar enzymes coexist, making biochemical assignment via sequence homology difficult. To rapidly assign function to the enzymes responsible for these metabolisms, we leveraged random barcode transposon sequencing (RB–Tn-Seq). Global fitness analyses of transposon libraries grown on 13 fatty acids and 10 alcohols produced strong phenotypes for hundreds of genes. Fitness data from mutant pools grown on fatty acids of varying chain lengths indicated specific enzyme substrate preferences and enabled us to hypothesize that DUF1302/DUF1329 family proteins potentially function as esterases. From the data, we also postulate catabolic routes for the two biogasoline molecules isoprenol and isopentanol, which are catabolized via leucine metabolism after initial oxidation and activation with coenzyme A (CoA). Because fatty acids and alcohols may serve as both feedstocks and final products of metabolic-engineering efforts, the fitness data presented here will help guide future genomic modifications toward higher titers, rates, and yields. IMPORTANCE To engineer novel metabolic pathways into P. putida, a comprehensive understanding of the genetic basis of its versatile metabolism is essential. Here, we provide functional evidence for the putative roles of hundreds of genes involved in the fatty acid and alcohol metabolism of the bacterium. These data provide a framework facilitating precise genetic changes to prevent product degradation and to channel the flux of specific pathway intermediates as desired.

Frontiers in Bioengineering and Biotechnology 8, 976 (2020). doi:10.3389/fbioe.2020.00976, Published by Frontiers Media, Lausanne

Frontiers in molecular biosciences 7, 211 (2020). doi:10.3389/fmolb.2020.00211, Published by Frontiers, Lausanne

OBJECTIVES: Non-alcoholic fatty liver disease (NAFLD) represents the major cause of pediatric chronic liver pathology in the United States. The objective of this study was to compare the relative effect of inclusion of isocaloric amounts of saturated medium-chain fatty acids (hydrogenated coconut oil), saturated long-chain fatty acids (lard) and unsaturated long-chain fatty acids (olive oil) on endpoints of NAFLD and insulin resistance. METHODS: Thirty-eight 15-d-old Iberian pigs were fed 1 of 4 diets containing (g/kg body weight × d) 1) control (CON; n = 8): 0 g fructose, 10.5 g fat, and 187 kcal metabolizable energy (ME), 2) lard (LAR; n = 10): 21.6 g fructose, 17.1 g fat (100% lard) and 299 kcal ME, 3) hydrogenated coconut oil (COCO; n = 10): 21.6 g fructose, 16.9 g fat (42.5% lard and 57.5% coconut oil) and 299 kcal ME, and 4) olive oil (OLV, n = 10): 21.6 g fructose, 17.1 g fat (43.5% lard and 56.5% olive oil) and 299 kcal ME, for 9 consecutive weeks. Body weight was recorded every 3 d. Serum markers of liver injury and dyslipidemia were measured on d 60 at 2 h post feeding, with all other serum measures assessed on d 70. Liver tissue was collected on d 70 for histology, triacylglyceride (TG) quantification, and metabolomics analysis. RESULTS: Tissue histology indicated the presence of steatosis in LAR, COCO and OLV compared with CON (P ≤ 0.001), with a further increase in in non-alcoholic steatohepatitis (NASH) in OLV and COCO compared with LAR (P ≤ 0.01). Alanine and aspartate aminotransferases were higher in COCO and OLV (P ≤ 0.01) than CON. All treatment groups had lower liver concentrations of methyl donor's choline and betaine versus CON, while bile acids were differentially changed (P ≤ 0.05). COCO had higher levels of TGs with less carbons (Total carbons

Electroautotrophy is a novel and fascinating microbial metabolism, with tremendous potential for CO2 storage and valorization into chemicals and materials made thereof. Research attention has been devoted toward the characterization of acetogenic and methanogenic electroautotrophs. In contrast, here we characterize the electrophysiology of a sulfate-reducing bacterium, Desulfosporosinus orientis, harboring the Wood-Ljungdahl pathway and, thus, capable of fixing CO2 into acetyl-CoA. For most electroautotrophs the mode of electron uptake is still not fully clarified. Our electrochemical experiments at different polarization conditions and Fe0 corrosion tests point to a H2- mediated electron uptake ability of this strain. This observation is in line with the lack of outer membrane and periplasmic multi-heme c-type cytochromes in this bacterium. Maximum planktonic biomass production and a maximum sulfate reduction rate of 2 ± 0.4 mM day-1 were obtained with an applied cathode potential of -900 mV vs. Ag/AgCl, resulting in an electron recovery in sulfate reduction of 37 ± 1.4%. Anaerobic sulfate respiration is more thermodynamically favorable than acetogenesis. Nevertheless, D. orientis strains adapted to sulfate-limiting conditions, could be tuned to electrosynthetic production of up to 8 mM of acetate, which compares well with other electroacetogens. The yield per biomass was very similar to H2/CO2 based acetogenesis. Acetate bioelectrosynthesis was confirmed through stable isotope labeling experiments with Na-H13CO3. Our results highlight a great influence of the CO2 feeding strategy and start-up H2 level in the catholyte on planktonic biomass growth and acetate production. In serum bottles experiments, D. orientis also generated butyrate, which makes D. orientis even more attractive for bioelectrosynthesis application. A further optimization of these physiological pathways is needed to obtain electrosynthetic butyrate production in D. orientis biocathodes. This study expands the diversity of facultative autotrophs able to perform H2-mediated extracellular electron uptake in Bioelectrochemical Systems (BES). We characterized a sulfate-reducing and acetogenic bacterium, D. orientis, able to naturally produce acetate and butyrate from CO2 and H2. For any future bioprocess, the exploitation of planktonic growing electroautotrophs with H2-mediated electron uptake would allow for a better use of the entire liquid volume of the cathodic reactor and, thus, higher productivities and product yields from CO2-rich waste gas streams.

Paracoccus spp. are metabolically versatile alphaproteobacteria able to perform heterotrophic and chemoautotrophic growth. This study describes the whole-genome sequence of the Paracoccus pantotrophus type strain DSM 2944 (ATCC 35512, LMD 82.5, GB17). The genome sequence revealed the presence of a complete phaZ phaC phaP phaR gene cluster related to polyhydroxyalkanoate metabolism.

Graphical abstract, Microbial co-cultures have been used in several biotechnological applications. Within these co-cultures, the microorganisms tend to interact with each other and perform complex actions. Investigating metabolic interactions in microbial co-cultures is crucial in designing microbial consortia. Here, we present a pipeline integrating modelling and experimental approaches to understand metabolic interactions between organisms in a community. We define a new index named “Metabolic Support Index (MSI)”, which quantifies the benefits derived by each organism in the presence of the other when grown as a co-culture. We computed MSI for several experimentally demonstrated co-cultures and showed that MSI, as a metric, accurately identifies the organism that derives the maximum benefit. We also computed MSI for a commonly used yeast co-culture consisting of Saccharomyces cerevisiae and Pichia stipitis and observed that the latter derives higher benefit from the interaction. Further, we designed two-stage experiments to study mutual interactions and showed that P. stipitis indeed derives the maximum benefit from the interaction, as shown from our computational predictions. Also, using our previously developed computational tool MetQuest, we identified all the metabolic exchanges happening between these organisms by analysing the pathways spanning the two organisms. By analysing the HPLC profiles and studying the isotope labelling, we show that P. stipitis consumes the ethanol produced by S. cerevisiae when grown on glucose-rich medium under aerobic conditions, as also indicated by our in silico pathway analyses. Our approach represents an important step in understanding metabolic interactions in microbial communities through an integrated computational and experimental workflow.

The production of biosurfactants is often hampered by excessive foaming in the bioreactor, impacting system scale-up and downstream processing. Foam fractionation was proposed to tackle this challenge by combining in situ product removal with a pre-purification step. In previous studies, foam fractionation was coupled to bioreactor operation, hence it was operated at suboptimal parameters. Here, we use an external fractionation column to decouple biosurfactant production from foam fractionation, enabling continuous surfactant separation, which is especially suited for system scale-up. As a subsequent product recovery step, continuous foam adsorption was integrated into the process. The configuration is evaluated for rhamnolipid (RL) or 3-(3-hydroxyalkanoyloxy)alkanoic acid (HAA, i.e., RL precursor) production by recombinant non-pathogenic Pseudomonas putida KT2440. Surfactant concentrations of 7.5 gRL/L and 2.0 gHAA/L were obtained in the fractionated foam. 4.7 g RLs and 2.8 g HAAs could be separated in the 2-stage recovery process within 36 h from a 2 L culture volume. With a culture volume scale-up to 9 L, 16 g RLs were adsorbed, and the space-time yield (STY) increased by 31% to 0.21&nbsp, gRL/L∙h. We demonstrate a well-performing process design for biosurfactant production and recovery as a contribution to a vital bioeconomy.

Microbial bioproduction of the aromatic acid anthranilate (ortho-aminobenzoate) has the potential to replace its current, environmentally demanding production process. The host organism employed for such a process needs to fulfil certain demands to achieve industrially relevant product levels. As anthranilate is toxic for microorganisms, the use of particularly robust production hosts can overcome issues from product inhibition. The microorganisms Corynebacterium glutamicum and Pseudomonas putida are known for high tolerance towards a variety of chemicals and could serve as promising platform strains. In this study, the resistance of both wild-type strains towards anthranilate was assessed. To further enhance their native tolerance, adaptive laboratory evolution (ALE) was applied. Sequential batch fermentation processes were developed, adapted to the cultivation demands for C. glutamicum and P. putida, to enable long-term cultivation in the presence of anthranilate. Isolation and analysis of single mutants revealed phenotypes with improved growth behaviour in the presence of anthranilate for both strains. The characterization and improvement of both potential hosts provide an important basis for further process optimization and will aid the establishment of an industrially competitive method for microbial synthesis of anthranilate.

Green chemistry : GC 22(23), 8495-8510 (2020). doi:10.1039/d0gc02885a, Published by RSC, Cambridge

Biotechnology journal : BTJ (2020). doi:10.1002/biot.202000211, Published by Wiley-VCH, Weinheim

Frontiers in Bioengineering and Biotechnology 8, 572892 (2020). doi:10.3389/fbioe.2020.572892, Published by Frontiers Media, Lausanne

Frontiers in Bioengineering and Biotechnology 7, 476 (2020). doi:10.3389/fbioe.2019.00476, Published by Frontiers Media, Lausanne

Frontiers in Bioengineering and Biotechnology 8, 38 (2020). doi:10.3389/fbioe.2020.00038, Published by Frontiers Media, Lausanne

Frontiers in Bioengineering and Biotechnology 7, 480 (2020). doi:10.3389/fbioe.2019.00480, Published by Frontiers Media, Lausanne

With its ability to catabolize a wide variety of carbon sources and a growing engineering toolkit, Pseudomonas putida KT2440 is emerging as an important chassis organism for metabolic engineering. Despite advances in our understanding of this organism, many gaps remain in our knowledge of the genetic basis of its metabolic capabilities. These gaps are particularly noticeable in our understanding of both fatty acid and alcohol catabolism, where many paralogs putatively coding for similar enzymes co-exist making biochemical assignment via sequence homology difficult. To rapidly assign function to the enzymes responsible for these metabolisms, we leveraged Random Barcode Transposon Sequencing (RB-TnSeq). Global fitness analyses of transposon libraries grown on 13 fatty acids and 10 alcohols produced strong phenotypes for hundreds of genes. Fitness data from mutant pools grown on varying chain length fatty acids indicated specific enzyme substrate preferences, and enabled us to hypothesize that DUF1302/DUF1329 family proteins potentially function as esterases. From the data we also postulate catabolic routes for the two biogasoline molecules isoprenol and isopentanol, which are catabolized via leucine metabolism after initial oxidation and activation with CoA. Because fatty acids and alcohols may serve as both feedstocks or final products of metabolic engineering efforts, the fitness data presented here will help guide future genomic modifications towards higher titers, rates, and yields.IMPORTANCETo engineer novel metabolic pathways into P. putida, a comprehensive understanding of the genetic basis of its versatile metabolism is essential. Here we provide functional evidence for the putative roles of hundreds of genes involved in the fatty acid and alcohol metabolism of this bacterium. These data provide a framework facilitating precise genetic changes to prevent product degradation and channel the flux of specific pathway intermediates as desired.

Biotechnology and Bioengineering 27337 (2020). doi:10.1002/bit.27337, Published by Wiley, New York, NY

The longer cells stay in particular phases of the cell cycle, the longer it will take these cell populations to increase. However, the above qualitative description has very little predictive value, unless it can be codified mathematically. A quantitative relation that defines the population doubling time (Td) as a function of the time eukaryotic cells spend in specific cell cycle phases would be instrumental for estimating rates of cell proliferation and for evaluating introduced perturbations. Here, we show that in human cells the length of the G1 phase (TG1) regressed on Tdwith a slope of ≈0.75, while in the yeastSaccharomyces cerevisiaethe slope was slightly smaller, at ≈0.60. On the other hand, cell size was not strongly associated with Tdor TG1in cell cultures that were proliferating at different rates. Furthermore, we show that levels of the yeast G1 cyclin Cln3p were positively associated with rates of cell proliferation over a broad range, at least in part through translational control mediated by a short uORF in theCLN3transcript. Cln3p was also necessary for the proper scaling between TG1and Td. In contrast, yeast lacking the Whi5p transcriptional repressor maintained the scaling between TG1and Td. These data reveal fundamental scaling relations between the duration of eukaryotic cell cycle phases and rates of cell proliferation, point to the necessary role of Cln3p in these relations in yeast and provide a mechanistic basis linking Cln3p levels to proliferation rates and the scaling of G1 with doubling time.

Aromatic chemicals are important building blocks for the production of a multitude of everyday commodities. Currently, aromatics production relies almost exclusively on petrochemical processes. To achieve sustainability, alternative synthesis methods need to be developed. Here, we strived for an efficient production of phenol, a model aromatic compound of industrial relevance, from renewable carbon sources using the solvent-tolerant biocatalyst Pseudomonas taiwanensis VLB120. First, multiple catabolic routes for the degradation of aromatics and related compounds were inactivated, thereby obtaining the chassis strain P. taiwanensis VLB120Δ5 incapable of growing on 4-hydroxybenzoate (ΔpobA), tyrosine (Δhpd), and quinate (ΔquiC, ΔquiC1, ΔquiC2). In this context, a novel gene contributing to the quinate catabolism was identified (quiC2). Second, we employed a combination of reverse- and forward engineering to increase metabolic flux towards the product, using leads obtained from the analysis of aromatics producing Pseudomonas putida strains previously generated by mutagenesis. Phenol production was enabled by the heterologous expression of a codon-optimized and chromosomally integrated tyrosine phenol-lyase encoding gene from Pantoea agglomerans AJ2985 (PaTPL2). The genomic modification of endogenous genes encoding TrpEP290S, AroF-1P148L, and PheAT310I, and the deletion of pykA improved phenol production 17-fold, while also minimizing the burden caused by plasmids and auxotrophies. The additional overexpression of known bottleneck enzymes (AroGfbr, TyrAfbr) derived from Escherichia coli further enhanced phenol titers. The best producing strain P. taiwanensis VLB120Δ5-TPL36 reached yields of 15.8% and 18.5% (Cmol/Cmol) phenol from glucose and glycerol, respectively, in a mineral medium without addition of complex nutrients. This is the highest yield ever reported for microbially produced phenol.

Background and Aims The main objective of the study was to test if differences in leaf composition induced by the rootstock could be detected through non‐invasive fluorescence sensor technology. Methods and Results Multiplex Research measurements on three dates over three consecutive growing seasons showed that Pinot Noir (Vitis vinifera L.) grafted onto high vigour rootstocks (125AA and SO4 with double the amount of pruning mass) had also leaves with high chlorophyll index and low flavonol index when compared to that of Riparia and Schwarzmann. Multiplex measurements ‘on‐the‐go’ gave similar results. Amino acids in juices, however, was not directly related to vine vigour as values for R110 and Riparia were significantly lower than that for 125AA. Conclusions The applicability of new optical sensors used both manually or ‘on‐the‐go’ to characterise rootstock influence on scion leaf composition was established and could be related to vine vigour conferred by the rootstock. Significance of the Study Our study provides evidence that non‐invasive fluorescence sensors used for the first time over consecutive growing seasons and dates are able to reveal differences in scion leaf composition induced by the rootstock in relation to vine vigour and to provide the basis for a better understanding of its impact on fruit and wine composition.

Xyela davidsmithi Blank and Kramp sp. n. is described from the Sierra Nevada of California. Morphological characters place it into the X. alpigena group. Unlike other members of this group, whose larvae feed inside staminate cones of species of Pinus (Strobus), larvae of X. davidsmithi identified by COI barcoding have been extracted from staminate cones of P. (Pinus) jeffreyi. Field observations on imagines of X. brunneiceps Rohwer, 1913 indicate that this species is oligophagous on P. (S.) flexilis in Colorado and on P. (S.) strobiformis in Arizona. A key to the Nearctic species of the X. alpigena group is provided.

The African fauna of the rare family of parasitoid wasps, Orussidae, is reviewed. Five genera with 24 valid species are recognized. Chalinus davidi Vilhelmsen n. sp. is described; the male of Chalinus albitibialis Vilhelmsen, 2005, the male of Leptorussus madagascarensis Vilhelmsen, 2007 and the female of Orussus smithi Blank et al., 2006 are described. A neotype is designated for Oryssus plumicornis Guerin-Meneville, [1849] to properly define the genus-group name Chalinus Konow, 1897. Chalinus braunsi (Enslin, 1911), C. orientalis Guiglia, 1937 and C. somalicus Guiglia, 1935 are regarded as new junior synonyms of C. plumicornis. Leptorussus kwazuluensis Vilhelmsen, 2003 is regarded as a new junior synonym of L. africanus Benson, 1955. Distribution records for specimens examined by us are listed. The Afrotropical component of the African orussid fauna shows a high degree of endemism, with two endemic genera and 13 endemic species; only Chalinus timnaensis Kraus, 1998 and Pseudoryssus niehuisorum...

While yeast is one of the most studied organisms, its intricate biology remains to be fully mapped and understood. This is especially the case when it comes to capture rapid, in vivo fluctuations of metabolite levels. Secondary electrospray ionization-high resolution mass spectrometry SESI-HRMS is introduced here as a sensitive and noninvasive analytical technique for online monitoring of microbial metabolic activity. The power of this technique is exemplarily shown for baker’s yeast fermentation, for which the time-resolved abundance of about 300 metabolites is demonstrated. The results suggest that a large number of metabolites produced by yeast from glucose neither are reported in the literature nor are their biochemical origins deciphered. With the technique demonstrated here, researchers interested in distant disciplines such as yeast physiology and food quality will gain new insights into the biochemical capability of this simple eukaryote., Scientific Reports, 7 (1), ISSN:2045-2322

The beetle family Ptilodactylidae contains more than 500 extant species, however, its fossil record is scarce and remains understudied. In this study, we describe a new species of Ptilodactylidae, Ptilodactyla eocenica Kundrata, Bukejs and Blank, sp. nov., based on a relatively well-preserved specimen from Baltic amber. We use X-ray microcomputed tomography to reconstruct its morphology since some of the principal diagnostic characters have been obscured by opaque bubbles. It is the third ptilodactylid species described from Baltic amber, and the first one belonging to the subfamily Ptilodactylinae. Additionally, we summarize the classification, diversity, and distribution of both extinct and extant Ptilodactylidae.

Brewers' spent grain (BSG) is produced worldwide in millions of tons during the beer brewing process. Due to its high content of structural carbohydrates, BSG is a promising material for being valorised in biorefineries. In this study three process routes for producing itaconate from BSG hydrolysates are presented using the previously engineered smut fungi UstilagomaydisMB215Δcyp3ΔPria1::Petef as whole-cell biocatalyst. Using a fermentation medium based on BSG hydrolysate a yield of 0.38gIta/gSugar and a productivity of 0.11gIta/(L·h) were achieved. The addition of detoxified hydrothermal supernatant to the fermentation medium did not result in improved performance parameters but resulted in a decreased yield (0.29gIta/gSugar) and productivity (0.053 gIta/(L·h)). Simultaneous saccharification and fermentation with hydrothermal pretreated BSG is possible, although at lower rate. In summary, the valorisation of BSG in fungal fermentations might complement the end-of-life options of this industrial side product.

Metabolic engineering of microbial cell factories for the production of heterologous secondary metabolites implicitly relies on the intensification of intracellular flux directed toward the product of choice. Apart from reactions following peripheral pathways, enzymes of the central carbon metabolism are usually targeted for the enhancement of precursor supply. In Pseudomonas putida, a Gram-negative soil bacterium, central carbon metabolism, i.e., the reactions required for the synthesis of all 12 biomass precursors, was shown to be regulated at the metabolic level and not at the transcriptional level. The bacterium's central carbon metabolism appears to be driven by demand to react rapidly to ever-changing environmental conditions. In contrast, peripheral pathways that are only required for growth under certain conditions are regulated transcriptionally. In this work, we show that this regulation regime can be exploited for metabolic engineering. We tested this driven-by-demand metabolic engineering strategy using rhamnolipid production as an example. Rhamnolipid synthesis relies on two pathways, i.e., fatty acid de novo synthesis and the rhamnose pathway, providing the required precursors hydroxyalkanoyloxy-alkanoic acid (HAA) and activated (dTDP-)rhamnose, respectively. In contrast to single-pathway molecules, rhamnolipid synthesis causes demand for two central carbon metabolism intermediates, i.e., acetyl-CoA for HAA and glucose-6-phosphate for rhamnose synthesis. Following the above-outlined strategy of driven by demand, a synthetic promoter library was developed to identify the optimal expression of the two essential genes (rhlAB) for rhamnolipid synthesis. The best rhamnolipid-synthesizing strain had a yield of 40% rhamnolipids on sugar [CmolRL/CmolGlc], which is approximately 55% of the theoretical yield. The rate of rhamnolipid synthesis of this strain was also high. Compared to an exponentially growing wild type, the rhamnose pathway increased its flux by 300%, whereas the flux through de novo fatty acid synthesis increased by 50%. We show that the central carbon metabolism of P. putida is capable of meeting the metabolic demand generated by engineering transcription in peripheral pathways, thereby enabling a significant rerouting of carbon flux toward the product of interest, in this case, rhamnolipids of industrial interest., Graphical abstract, Highlights • Synthetic demand was created by the introduction of the rhamnolipid synthesis genes. • A high demand was achieved using a strong synthetic promoter. • Pseudomonas putida responded to demand by increasing flux towards required central carbon metabolites. • High rhamnolipid carbon yield of 40% was achieved.

The ‘Symphyta’ is a paraphyletic assemblage at the base of the order Hymenoptera, comprising 14 families and about 8750 species. All have phytophagous larvae, except for the Orussidae, which are parasitoids. This study presents and evaluates the results of DNA barcoding of approximately 5360 specimens of ‘Symphyta’, mainly adults, and 4362 sequences covering 1037 species were deemed of suitable quality for inclusion in the analysis. All extant families are represented, except for the Anaxyelidae. The majority of species and specimens are from Europe, but approximately 38% of the species and 13% of the specimens are of non‐European origin. The utility of barcoding for species identification and taxonomy of ‘Symphyta’ is discussed on the basis of examples from each of the included families. A significant level of cryptic species diversity was apparent in many groups. Other attractive applications include the identification of immature stages without the need to rear them, community analyses based on metabarcoding of bulk samples and association of the sexes of adults.

The Ustilaginaceae family of smut fungi, especially Ustilago maydis, gained biotechnological interest over the last years, amongst others due to its ability to naturally produce the versatile bio-based building block itaconate. Along with itaconate, U. maydis also produces 2-hydroxyparaconate. The latter was proposed to be derived from itaconate, but the underlying biochemistry and associated genes were thus far unknown. Here, we confirm that 2-hydroxyparaconate is a secondary metabolite of U. maydis and propose an extension of U. maydis' itaconate pathway from itaconate to 2-hydroxyparaconate. This conversion is catalyzed by the P450 monooxygenase Cyp3, encoded by cyp3, a gene, which is adjacent to the itaconate gene cluster of U. maydis. By deletion of cyp3 and simultaneous overexpression of the gene cluster regulator ria1, it was possible to generate an itaconate hyper producer strain, which produced up to 4.5-fold more itaconate in comparison to the wildtype without the by-product 2-hydroxyparaconate. By adjusting culture conditions in controlled pulsed fed-batch fermentations, a product to substrate yield of 67% of the theoretical maximum was achieved. In all, the titer, rate and yield of itaconate produced by U. maydis was considerably increased, thus contributing to the industrial application of this unicellular fungus for the biotechnological production of this valuable biomass derived chemical.

Pseudomonas putida efficiently utilizes many different carbon sources without the formation of byproducts even under conditions of stress. This implies a high degree of flexibility to cope with conditions that require a significantly altered distribution of carbon to either biomass or energy in the form of NADH. In the literature, co‐feeding of the reduced C1 compound formate to Escherichia coli heterologously expressing the NAD(+)‐dependent formate dehydrogenase of the yeast Candida boidinii was demonstrated to boost various NADH‐demanding applications. Pseudomonas putida as emerging biotechnological workhorse is inherently equipped with an NAD(+)‐dependent formate dehydrogenase encouraging us to investigate the use of formate and its effect on P. putida’s metabolism. Hence, this study provides a detailed insight into the co‐utilization of formate and glucose by P. putida. Our results show that the addition of formate leads to a high increase in the NADH regeneration rate resulting in a very high biomass yield on glucose. Metabolic flux analysis revealed a significant flux rerouting from catabolism to anabolism. These metabolic insights argue further for P. putida as a host for redox cofactor demanding bioprocesses.

Exploring the dynamic behavior of cellular metabolism requires a standard laboratory method that guarantees rapid sampling and extraction of the cellular content. We propose a versatile sampling technique applicable to cells with different cell wall and cell membrane properties. The technique is based on irreversible electroporation with simultaneous quenching and extraction by using a microfluidic device. By application of electric pulses in the millisecond range, permanent lethal pores are formed in the cell membrane of Escherichia coli and Saccharomyces cerevisiae, facilitating the release of the cellular contents, here demonstrated by the measurement of glucose-6-phosphate and the activity of the enzyme glucose-6-phosphate dehydrogenase. The successful application of this device was demonstrated by pulsed electric field treatment in a flow-through configuration of the microfluidic chip in combination with sampling, inactivation, and extraction of the intracellular content in a few seconds. Minimum electric field strengths of 10 kV/cm for E. coli and 7.5 kV/cm for yeast S. cerevisiae were required for successful cell lysis. The results are discussed in the context of applications in industrial biotechnology, where metabolomics analyses are important.

The molecular weight (Mw) of hyaluronic acid (HA) determines its suitability for medical and cosmetic applications. Here, we characterize in vitro and in vivo HA synthesis of streptococcal HA synthases (HASs) with a special focus on HA Mw. To date, four streptococcal HA producers are described (Streptococcus equi subsp. equi, S. equi subsp. zooepidemicus, S. pyogenes, and S. uberis). We identified two more potential HA producers in this study: S. iniae and S. parauberis. Indeed, the HA Mw produced by the different streptococcal HASs differs in vitro. To exploit these different HA Mw synthesis capacities, Lactococcus lactis strains expressing the streptococcal HASs were constructed. HA of different Mw was also produced in vivo by these engineered strains, strongly suggesting that the protein sequences of the HASs influence HA Mw. Since the HA Mw in vivo is also influenced by metabolic factors like specific growth rate and HA precursor availability, these were also determined. In summary, the maximal Mw of HA synthesized is specific for the individual synthase, while any decrease from the maximal HA Mw is influenced by physiological and metabolic factors. The results open new avenues for Mw-tailored HA synthesis.

Pseudomonas putidaKT2440 is known to metabolise glycerol via glycerol-3-phosphate using glycerol kinase an enzyme previously described as critical for glycerol metabolism (1). However, when glycerol kinase was knocked out inP. putidaKT2440 it retained the ability to use glycerol as the sole carbon source, albeit with a much-extended lag period and 2 fold lower final biomass compared to the wild type strain. A metabolomic study identified glycerate as a major and the most abundant intermediate in glycerol metabolism in this mutated strain with levels 21-fold higher than wild type. Erythrose-4-phosphate was detected in the mutant strain, but not in the wild type strain. Glyceraldehyde and glycraldehyde-3-phosphate were detected at similar levels in the mutant strain and the wild type. Transcriptomic studies identified 191 genes that were more than 2-fold upregulated in the mutant compared to the wild type and 175 that were down regulated. The genes involved in short chain length fatty acid metabolism were highly upregulated in the mutant strain. The genes encoding 3-hydroxybutyrate dehydrogenase were 5.8-fold upregulated and thus the gene was cloned, expressed and purified to reveal it can act on glyceraldehyde but not glycerol as a substrate.