Search

Platelets are emerging as a promising source of blood biomarkers for several pathologies, including cancer. New automated techniques for easier manipulation of platelets in the context of lab-on-a-chips could be of great support for liquid biopsy. Here, several polymeric materials were investigated for their behavior in terms of adhesion and activation of human platelets. Polymeric materials were selected among the most used in microfabrication (PDMS, PMMA and COC) and commercial and home-made resins for 3D printing technology with the aim to identify the most suitable for the realization of microdevices for human platelets isolation and analysis. To visualize adherent platelets and their activation state scanning, electron microscopy was used, while confocal microscopy was used for evaluating platelets’ features. In addition, atomic force microscopy was employed to further study platelets adherent to the polymeric materials. Polymers were divided in two main groups: the most prone to platelet adhesion and materials that cause few or no platelets to adhere. Therefore, different polymeric materials could be identified as suitable for the realization of microdevices aimed at capturing human platelets, while other materials could be employed for the fabrication of microdevices or parts of microdevices for the processing of platelets, without loss on surfaces during the process.

We report a comprehensive study of the biocompatibility and neurocompatibility of titanium dioxide films (TiO2) prepared by Pulsed Microplasma Cluster Source (PMCS). This technique uses supersonic pulsed beams seeded by clusters of the metal oxide synthesized in a plasma discharge. The final stoichiometry of the TiO2 thin films is tuned changing the gas mixture, achieving stoichiometric or oxygen overstoichiometric films. All the films showed consistent biocompatibility and a spontaneous absorption of poly-d-lysine (PDL) that favors the adhesion and growth of murine cortical neurons. Moreover, the bioelectrical activity of the neuronal culture grown on the TiO2 film can be modulated by changing the chemistry of the surface. This work paves the way to develop a bio-hybrid neuromorphic device, where viable nerve cells are grown directly over a titanium dioxide film showing a network of memristors.

In this paper, we described a versatile two steps approach for the realization of silica inverse opals functionalized with DNA-aptamers labelled with Cy3 fluorophore. The co-assembly method was successfully employed for the realization of high quality inverse silica opal, whilst the inverse network was functionalized via epoxy chemistry. Morphological and optical assessment revealed the presence of large ordered domains with a transmission band gap depth of 32%, after the functionalization procedure. Finite Difference Time-Domain (FDTD) simulations confirmed the high optical quality of the inverse opal realized. Photoluminescence measurements evidenced the effective immobilization of DNA-aptamer molecules labelled with Cy3 throughout the entire sample thickness. This assumption was verified by the inhibition of the fluorescence of Cy3 fluorophore tailoring the position of the photonic band gap of the inverse opal. The modification of the fluorescence could be justified by a variation in the density of states (DOS) calculated by the Plane Wave Expansion (PWE) method. Finally, the development of the aforementioned approach could be seen as proof of the concept experiment, suggesting that this type of system may act as a suitable platform for the realization of fluorescence-based bio-sensors.

Many efforts have been spent in the last decade for the development of nanoscale synaptic devices integrated into neuromorphic circuits, trying to emulate the behavior of natural synapses. The study of brain properties with the standard approaches based on biocompatible electrodes coupled to conventional electronics, however, presents strong limitations, which in turn could be overcame by the in-situ growth of neuronal networks coupled to memristive devices. To meet this challenging task, here two different chips were designed and fabricated for culturing neuronal cells and sensing their electrophysiological activity. The first chip was designed to be connected to an external memristor, while the second chip was coated with TiO2 films owning memristive properties. The biocompatibility of chips was preliminary analyzed by culturing the hybrid motor-neuron cell line NSC-34 and by measuring the electrical activity of cells interfacing the chip with a standard patch-clamp setup. Next, neurons were seeded on chips and their activity measured with the same setup. For both cell types total current and voltage responses were evoked and recorded with optimal results with no breakdowns. In addition, an external stimulation was applied to cells through chip electrodes, being effective and causing no damage or pitfalls to the cells. Finally, the whole bio-hybrid system, i.e. the chip interconnected with a commercial memristor, was tested with promising results. Spontaneous electrical activity of neurons grown on the chip was indeed present and this signal was collected and sent to the memristor, changing its state. Taken together, we demonstrated the ability of memristor to work with a synaptic/plastic response together with natural systems, opening the way for the further implementation of basic computing elements able to perform both storage and processing of data, as in natural neurons.

The biocompatibility of an implant depends upon the material it is composed of, in addition to the prosthetic device's morphology, mechanical and surface properties. Properties as porosity and pore size should allow, when required, cells penetration and proliferation. Stiffness and strength, that depend on the bulk characteristics of the material, should match the mechanical requirements of the prosthetic applications. Surface properties should allow integration in the surrounding tissues by activating proper communication pathways with the surrounding cells. Bulk and surface properties are not interconnected, and for instance a bone prosthesis could possess the necessary stiffness and strength for the application omitting out prerequisite surface properties essential for the osteointegration. In this case, surface treatment is mandatory and can be accomplished using various techniques such as applying coatings to the prosthesis, ion beams, chemical grafting or modification, low temperature plasma, or a combination of the aforementioned. Low temperature plasma-based techniques have gained increasing consensus for the surface modification of biomaterials for being effective and competitive compared to other ways to introduce surface functionalities. In this paper we review plasma processing techniques and describe potentialities and applications of plasma to tailor the interface of biomaterials.

A reliable clinical assay based on circulating microRNAs (miRNAs) as biomarkers is highly required. Microdevices offer an attractive solution as a fast and inexpensive way of concentrating these biomarkers from a low sample volume. A previously developed polydimethylsiloxane (PDMS) microdevice able to purify and detect circulating miRNAs was here optimized. The optimization of the morphological and chemical surface properties by nanopatterning and functionalization is presented. Surfaces were firstly characterized by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), fluorescamine assay and s-SDTB (sulphosuccinimidyl-4-o-(4,4-dimethoxytrityl) butyrate) assay and subsequently tested for their capacity to adsorb a fluorescent miRNA. From our analysis, modification of surface charge with 0.1% APTMS ((3-Aminopropyl)trimethoxysilane) and 0.9% PEG-s (2-[Methoxy-(polyethyleneoxy)propyl]trimethoxysilane) performed at 60 °C for 10 min was identified as the best purification condition. Our optimized microdevice integrated with real-time PCR detection, was demonstrated to selectively purify both synthetic and natural circulating miRNAs with a sensitivity of 0.01 pM.

MicroRNAs (miRNAs) are endogenous, small (18–24 nt), non-coding RNAs that regulate gene expression. Among miRNAs, those bound to the AGO2 protein are the functionally active fraction which mediates the cell regulatory processes and regulate messages exchanged by cells. Several methods have been developed to purify this fraction of microRNAs, such as immunoprecipitation and immunoprecipitation-derived techniques. However, all these techniques are generally recognized as technically complicated and time consuming. Here, a new bio-functional surface for the specific capture of AGO2-bound microRNAs is proposed. Starting from a silicon oxide surface, a protein A layer was covalently bound via epoxy chemistry to orient specific anti-AGO2 antibodies on the surface. The anti-AGO2 antibodies captured the AGO2 protein present in cell lysate and in human plasma. The AGO2-bound microRNAs were then released by enzymatic digestion and detected via RT-qPCR. Control surfaces were also prepared and tested. Every step in the preparation of the bio-functional surfaces was fully characterized from the chemical, morphological and functional point of view. The resulting bio-functional surface is able to specifically capture the AGO2-bound miRNAs from biologically-relevant samples, such as cell lysate and human plasma. These samples contain different proportions of AGO2-bound microRNAs, as reliably detected with the immunocapture method here proposed. This work opens new perspectives for a simple and faster method to isolate not only AGO2-bound microRNAs, but also the multiprotein complex containing AGO2 and miRNAs.

Hepatitis C virus (HCV) is one of the main causes of chronic liver disease worldwide. The diagnosis and monitoring of HCV infection is a crucial need in the clinical management. The conventional diagnostic technologies are challenged when trying to address molecular diagnostics, especially because they require a complex and time-consuming sample preparation phase. Here, a new concept based on surface functionalization was applied to viral RNA purification: first of all polydimethylsiloxane (PDMS) flat surfaces were modified to hold RNA adsorption. After a careful chemical and morphological analysis of the modified surfaces, the functionalization protocols giving the best RNA adsorbing surfaces were applied to PDMS microdevices. The functionalized microdevices were then used for RNA purification from HCV infected human plasma samples. RNA purification and RT were successfully performed in the same microdevice chamber, saving time of analysis, reagents, and labor. The PCR protocol for HCV cDNA amplification was also implemented in the microdevice, demonstrating that the entire process of HCV analysis, from plasma to molecular readout, could be performed on-chip. Not only HCV but also other microdevice-based viral RNA detection could therefore result in a successful Point-of-Care (POC) diagnostics for resource-limited settings.

Pore formation of cellular membranes is an ancient mechanism of bacterial pathogenesis that allows efficient damaging of target cells. Several mechanisms have been described, however, relatively little is known about the assembly and properties of pores. Listeriolysin O (LLO) is a pH-regulated cholesterol-dependent cytolysin from the intracellular pathogen Listeria monocytogenes, which forms transmembrane β-barrel pores. Here we report that the assembly of LLO pores is rapid and efficient irrespective of pH. While pore diameters at the membrane surface are comparable at either pH 5.5 or 7.4, the distribution of pore conductances is significantly pH-dependent. This is directed by the unique residue H311, which is also important for the conformational stability of the LLO monomer and the rate of pore formation. The functional pores exhibit variations in height profiles and can reconfigure significantly by merging to other full pores or arcs. Our results indicate significant plasticity of large β-barrel pores, controlled by environmental cues like pH.

A steady-state kinetic study of bovine serum amine oxidase activity was performed, over a wide range of pH values (5.4-10.2) and ionic strength (10-200 mM), using various (physiological and analogue) substrates as specific probes of the active-site binding region. Relatively small changes in k (cat) values (approx. one order of magnitude) accompanied by marked changes in K(m) and k(cat)/K(m) values (approx. six orders of magnitude) were observed. This behaviour was correlated with the presence of positively charged groups or apolar chains in the substrates. In particular, it was found that the docking of the physiological polyamines, i.e. spermidine and spermine, appears to be modulated by three amino acid residues of the active site, which we have named L(-)H(+), G(-)H(+) and IH(+), characterized by p K (a) values of 6.2+/-0.2 [Di Paolo, Scarpa, Corazza, Stevanato and Rigo (2002) Biophys. J. 83, 2231-2239], 8.2+/-0.3 and 7.8+/-0.4 respectively. The electrostatic interaction between the protonated substrates and the enzyme containing the residues L(-)H(+), G(-)H(+) and IH(+) in the deprotonated form, the on/off role of the IH(+) residue and the role of hydrophobic interactions with substrates characterized by apolar chains are discussed.

There is an increasing interest in circulating microRNAs (miRNAs) as potential minimally invasive diagnostic biomarkers in oncology. Considerable efforts are being made in the development of lab-on-a-chip devices for biomedical applications to purify and detect miRNAs from biological fluids. Here, we report the development of an innovative polydimethylsiloxane (PDMS)-based parallel device whose internal surface can opportunely be functionalized with positively charged 3-aminopropyltriethoxysilane (APTES) alone or mixed with two different neutral poly(ethylene glycol) silanes (PEG-s). The differently functionalized internal surfaces of the PDMS chip were characterized with s-SDTB (sulfosuccinimidyl-4-o-(4,4-dimethoxytrityl) butyrate) and the portion of the surface able to adsorb a synthetic fluorescently labeled miRNA was determined. Interestingly, the adsorbed miRNA (both synthetic and cell supernatant-derived) was found mainly on the bottom surface of the chip and could be reverse transcribed into cDNA directly on the same PDMS chip used for its purification, saving hours with respect to the use of standard purification kits. We identified 0.1% APTES/0.9% PEG-silane as the most efficient PDMS functionalization to capture both synthetic and extracellular miRNA. Moreover, the amount of captured miRNA was increased by treating the cell supernatant with a commercially available lysis buffer for RNA extraction. We assessed that the available miRNA binding sites on the functionalized surface were efficiently saturated with only one incubation, shortening the time and greatly simplifying the protocol for miRNA purification from biological samples. Finally, the extracellular miRNA purification efficiency of the PDMS functionalized multichip determined via real-time quantitative polymerase chain reaction (RT-qPCR) was confirmed by droplet digital PCR (ddPCR) quantification. This work shows an innovative, rapid and easy to use microdevice for the purification and reverse transcription of circulating miRNAs, approaching the realization of diagnostic and prognostic oncomiR-based assays. This journal is

Bovine carbonmonoxy hemoglobin investigated with light scattering studies is found to dissociate from its native tetramer structure into dimers and monomers. The values of the hydrated tetramer radius, RT = 32.1 A, and the fractional dissociation vs pH, have been obtained at different ionic strengths from the autocorrelation function of the scattered light. The results suggest that a relevant contribution to Hb dissociation is due to electrostatic effects and, by means of a model derived by Tanford, it has been possible to predict the behavior of dissociation. Among the findings of this approach, we recall the estimates of the electrostatic energy contributions to Hb dissociation, up to ≃ GRT, and the predicted charge of tetrameric Hb vs pH, which agrees very well with the experimental data. © 1994 John Wiley & Sons, Inc.

In this paper we report an innovative use of Poly(DiMethyl)Siloxane (PDMS) to design a microfluidic device that combines, for the first time, in one single reaction chamber, DNA purification from a complex biological sample (blood) without elution and PCR without surface passivation agents. This result is achieved by exploiting the spontaneous chemical structure and nanomorphology of the material after casting. The observed surface organization leads to spontaneous DNA adsorption. This property allows on-chip complete protocols of purification of complex biological samples to be performed directly, starting from cells lysis. Amplification by PCR is performed directly on the adsorbed DNA, avoiding the elution process that is normally required by DNA purification protocols. The use of one single microfluidic volume for both DNA purification and amplification dramatically simplifies the structure of microfluidic devices for DNA preparation. X-Ray Photoelectron Spectroscopy (XPS) was used to analyze the surface chemical composition. Atomic Force Microscopy (AFM) and Field Emission Scanning Electron Microscopy (FESEM) were employed to assess the morphological nanostructure of the PDMS-chips. A confocal fluorescence analysis was utilized to check DNA distribution inside the chip.

Two DNA plasmids, pEGF and pACL29, intercalated with ethidium bromide (EB), have been examined by circular dichroism (CD) and dynamic light scattering (DLS). CD and DLS data show significant changes when the EB/DNA (phosphates) ratio reaches a value of r approximately equal to 0.13. The translational and rotational diffusion coefficients, predicted assuming that plasmids can be described by a string of beads, and the CD spectrum, suggest that a transition from an interwound to a toroidal conformation is likely to occur.

In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff's base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.