Search

The magnitude and pattern of acceptable long-term migration of cementless femoral stems are not well understood. The Corail hydroxyapatite-coated cementless stem is a clinically successful and commonly used femoral stem with a long-term migration pattern not previously described in the literature. The aim of this study was to assess the long-term migration of the Corail hydroxyapatite-coated cementless stem using radiostereometric analysis (RSA) at 14-year follow-up, thereby establishing a benchmark acceptable long-term migration pattern for hydroxyapatite-coated cementless prostheses. A prospective cohort of 29 patients (30 hips) undergoing primary total hip arthroplasty for primary hip osteoarthritis were enrolled into a study to characterise the migration of the Corail cementless stem. A total of 13 patients (4 males, 9 females) with mean age 82 (range 68–92) underwent repeat RSA radiographs at minimum 10 years post-operation (mean 13.9 years, range 13.3–14.4). Subsidence of the stem was measured and compared to prior measurements taken at 6 months and 1, 2, and 6 years. None of the 13 patients have been revised. The migration at 6 months, 1 year, 2 years, and 6 years has been previously recorded. At mean 14-year follow-up, the cohort mean subsidence of the cementless stem was 0.70 mm (range − 0.06 to 3.61 mm). For each stem followed up at 6 months and 14 years, the mean subsidence over this period was 0.05 mm (range − 0.14 to 0.57 mm). There is no significant difference in mean subsidence at 6 months and 14 years (p = 0.43). The long-term pattern of the subsidence of the Corail femoral stem has not previously been described. Subsidence occurs within the first 6 months, after which there is persistent stabilisation of the implant to 14 years. This study provides a description of a long-term acceptable migration pattern to which new hydroxyapatite-coated cementless prostheses may be compared. II.

Objective: To study, in end-stage knee osteoarthritis (OA) patients, relationships between indices of in vivo dynamic knee joint loads obtained pre-operatively using gait analysis, static knee alignment, and the subchondral trabecular bone (STB) microarchitecture of their excised tibial plateau quantified with 3D micro-CT. Design: Twenty-five knee OA patients scheduled for total knee arthroplasty underwent pre-operative gait analysis. Mechanical axis deviation (MAD) was determined radiographically. Following surgery, excised tibial plateaus were micro-CT-scanned and STB microarchitecture analysed in four subregions (anteromedial, posteromedial, anterolateral, posterolateral). Regional differences in STB microarchitecture and relationships between joint loading and microarchitecture were examined. Results: STB microarchitecture differed among subregions (P < 0.001), anteromedially exhibiting highest bone volume fraction (BV/TV) and lowest structure model index (SMI). Anteromedial BV/TV and SMI correlated strongest with the peak external rotation moment (ERM; r = -0.74, r = 0.67, P < 0.01), despite ERM being the lowest (by factor of 10) of the moments considered, with majority of ERM measures below accuracy thresholds; medial-to-lateral BV/TV ratios correlated with ERM, MAD, knee adduction moment (KAM) and internal rotation moment (|r|-range: 0.54-0.74). When controlling for walking speed, KAM and MAD, the ERM explained additional 11-30% of the variations in anteromedial BV/TV and medial-to-lateral BV/TV ratio (R 2 = 0.59, R 2 = 0.69, P < 0.01). Conclusions: This preliminary study suggests significant associations between tibial plateau STB microarchitecture and knee joint loading indices in end-stage knee OA patients. Particularly, anteromedial BV/TV correlates strongest with ERM, whereas medial-to-lateral BV/TV ratio correlates strongest with indicators of medial-to-lateral joint loading (MAD, KAM) and rotational moments. However, associations with ERM should be interpreted with caution. Refereed/Peer-reviewed

One cross-linked polyethylene (XLPE) liner is manufactured using a lower dose of radiation, 5 Mrad, which may result in less cross-linking. The reported in vivo wear rate of this XLPE liner in patients undergoing THA has varied, and has included some patients in each reported cohort who had greater than 0.1 mm/year of wear, which is an historical threshold for osteolysis. Previous studies have measured wear on plain radiographs, an approach that has limited sensitivity.We therefore measured the amount and direction of wear at 6 years using Radiostereometric analysis (RSA) in patients who had THAs that included a cross-linked polyethylene liner manufactured using 5 Mrad radiation.We prospectively reviewed wear in 30 patients who underwent primary THAs with the same design of cross-linked acetabular liner and a 28-mm articulation. Tantalum markers were inserted during surgery and all patients had RSA radiographic examinations at 1 week, 6 months, 1, 2, and 6 years postoperatively.The mean proximal, two-dimensional (2-D) and three-dimensional (3-D) wear rates calculated between 1 year and 6 years were 0.014, 0.014, and 0.018 mm/per year, respectively. The direction of the head penetration recorded between 1 week and 6 years was in a proximal direction for all patients, proximolateral for 16 of 24 patients, and proximomedial for eight of 24 patients.The proximal, 2-D and 3-D wear of a XLPE liner produced using 5 Mrad of radiation was low but measurable by RSA after 6 years. No patients had proximal 2-D or 3-D wear rates exceeding 0.1 mm/year. Further followup is needed to evaluate the effect of XLPE wear particles on the development of long-term osteolysis.

Objectives: To (1) stratify patient subgroups according to their distinct walking gait patterns in end-stage knee osteoarthritis (OA); (2) compare measures of joint loading and proximal tibia subchondral trabecular bone (STB) microarchitecture among these gait subgroups. Design: Twenty-five knee OA patients undergoing total knee arthroplasty (TKA) had pre-operative gait analysis. Following surgery, excised tibial plateaus were micro-CT-scanned and STB microarchitecture analysed in four tibial condylar regions of interest. Peak knee moments were input to k-means cluster analysis, to identify subgroups with homogeneous gait patterns. Joint loading and STB microarchitecture parameters were compared among gait subgroups (Kruskal-Wallis, Bonferroni-corrected Mann-Whitney U tests). Results: Three gait subgroups were revealed: biphasics (n = 7), flexors (n = 9), counter-rotators (n = 9). Peak knee adduction moment (KAM) and KAM impulse were significantly higher (P < 0.05) in biphasics than in flexors and counter-rotators (KAM = -0.65, -0.40 and -0.21 Nm/kg, respectively), suggesting a higher medial-to-lateral tibiofemoral load ratio in biphasics. Interestingly, STB medial-to-lateral bone volume fraction (BV/TV) ratio was also significantly higher (more than double) in biphasics and flexors than in counter-rotators (2.24, 2.00 and 1.00, respectively), whereas in biphasics it was only 10% higher than in flexors and not significantly so. Conclusions: Within the confines of the limited sample size, data suggests that different mechanisms between the biphasic and flexor gait subroups may generate comparable loads upon the tibial plateau and corresponding bony responses, despite significantly lower KAM indices in flexors. Hence, in flexor gait OA patients, conservative treatments designed to reduce KAM, may not be appropriate. Understanding joint loading among walking gait patterns and relationships to bone microarchitecture may aid at identifying/improving management of persons at risk for developing knee OA. Refereed/Peer-reviewed

Tibial subchondral bone plays an important role in knee osteoarthritis (OA). Microarchitectural characterization of subchondral bone plate (SBP), underlying subchondral trabecular bone (STB) and relationships between these compartments, however, is limited. The aim of this study was to characterize the spatial distribution of SBP thickness, SBP porosity and STB microarchitecture, and relationships among them, in OA tibiae of varying joint alignment. Twenty-five tibial plateaus from end-stage knee-OA patients, with varus (n = 17) or non-varus (n = 8) alignment were micro-CT scanned (17 μm/voxel). SBP and STB microarchitecture was quantified via a systematic mapping in 22 volumes of interest per knee (11 medial, 11 lateral). Significant within-condylar and between-condylar (medial vs. lateral) differences (p 0.05) were found. In varus, STB bone volume fraction (BV/TV) was consistently high throughout the medial condyle, whereas in non-varus, medially, it was more heterogeneously distributed. Regions of high SBP thickness were co-located with regions of high STB BV/TV underneath. In varus, BV/TV was significantly higher medially than laterally, however, not so in non-varus. Moreover, region-specific significant associations between the SBP thickness and SBP porosity and the underlying STB microarchitecture were detected, which in general were not captured when considering the values averaged for each condyle. As subchondral bone changes reflect responses to local mechanical and biochemical factors within the joint, our results suggest that joint alignment influences both the medial-to-lateral and the within-condyle distribution of force across the tibia, generating corresponding local bony responses (adaptation) of both the subchondral bone plate and underlying subchondral trabecular bone microarchitecture. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1927-1941, 2017.

We present the case of a patient with intraoperative femoral fracture during THA, which was repaired using cerclage fixation and insertion of an hydroxyapatite-coated cementless stem. The patient was evaluated postoperatively using radiostereometry during a 2-year course, and despite a large amount of subsidence and rotation, stabilization occurred and was maintained by 6 months. By evaluating the pattern of stem migration after intraoperative fracture, this case shows, even in the presence of instability, a successful clinical outcome can be achieved using an hydroxyapatite-coated cementless stem.

Measurement of early stem subsidence can be used to predict the likelihood of long-term femoral component loosening and clinical failure. Data that examines the early migration pattern of clinically proven stems will provide clinicians with useful baseline data with which to compare new stem designs. This study was performed to evaluate the early migration pattern of a hydroxyapatite-coated press-fit femoral component that has been in use for over ten years. We enrolled 30 patients who underwent THA for osteoarthritis. The median age was 70 years (range, 55–80 years). Patients were clinically assessed using the Harris hip score. Radiostereometric analysis was used to evaluate stem migration at three to four days, six months, one year and two years. We observed a mean subsidence of 0.73 mm at six months, 0.62 mm at one year and 0.58 mm at two years and a mean retroversion of 1.82° at six months, 1.90° at one year and 1.59° at two years. This data suggests that subsidence is confined to the first six months after which there was no further subsidence. The results from this study can be compared with those from novel cementless stem designs to help predict the long-term outcome one may expect from new cementless stem designs.

Background The Southern Adelaide Local Health Network is serviced by one orthopaedic surgeon specialising in foot and ankle surgery. In 2011, the waiting list to see the surgeon was expanding and the need for assistance was growing. The Department of Podiatry agreed to provide a podiatrist to assist in the management of the outpatient waiting list. Although patient outcome is an important outcome measure, we were interested in evaluating the service with respect to how satisfied patients were with seeing a podiatrist. Therefore, the primary aim of the study was to evaluate patient satisfaction with podiatry-led clinics for the orthopaedic outpatient waiting list. Secondary outcomes included discharge rate and efficiency of care. Methods We prospectively recruited a consecutive sample discharged from the Department of Podiatry between 1 May and 1 November 2013 to complete the Client Satisfaction Survey (CSQ-8). This survey was used to evaluate the satisfaction of patients following discharge from the Department of Podiatry. Results There were 49 patients (16 men, 33 women) enrolled in the survey during the 6-month period. Of the 49 patients discharged, 21 (43%) were discharged from the outpatient waiting list. Twenty-eight patients (57%) were referred on to the Department of Orthopaedic Surgery for opinion and management. The mean (± s.d.) number of appointments for each patient was 1.3 ± 0.6. Overall, patients were very satisfied with the assessment and/or treatment they received. Conclusion A podiatrist, working at an extended scope of practice and in collaboration with an orthopaedic surgeon, can successfully and efficiently assess and treat patients on an orthopaedic outpatient waiting list. Patients generally reported a high level of satisfaction with the process and would return to the clinic again if necessary. Hospital networks wanting to efficiently reduce waiting lists may endorse task substitution for appropriately skilled podiatrists. What is known about the topic? Allied health professionals have acted in extended scope of practice roles across several professions. These roles are often implemented in response to long waiting lists to see medical specialists. The acceptance of these practitioners by patients and the efficiency of these clinics are yet to be formally evaluated. What does the paper add? This paper should provide confidence in implementing orthopaedic triaging roles for podiatrists. High satisfaction rates were noted, along with an efficient service, both of which may be attractive for hospital networks. What are the implications for practitioners? Extended scope of practice podiatry roles may be implemented to assist in managing orthopaedic outpatient waiting lists.