Search

This paper studies the problem of global output-feedback tracking control for a class of uncertain nonlinear systems. The system studied in this paper has unknown time-varying control coefficients and unknown reference signal. Notably, the nonlinearities of the system are bounded by the lower triangular linear unmeasured states multiplying the unknown constant, the polynomial-of-output and the polynomial-of-input growth rates, which indicates the presence of serious uncertainties. Motivated by the closely related works, by combining the ideas of universal control and deadzone with backstepping technique, this paper presents a new adaptive tracking control scheme based on two dynamic high-gains in the new forms. The proposed control scheme ensures that the tracking error converges to a specified arbitrarily small interval range after a finite time while the state of the resulting closed-loop system is globally bounded. Finally, the effectiveness of the control scheme is verified by an illustrative example. [ABSTRACT FROM AUTHOR]

This paper studies the analysis and synthesis of distributed adaptive control architectures for uncertain multiagent systems with coupled dynamics in a leader-follower setting, where overall closed-loop system stability is established, and sufficient stability conditions are defined. Specifically, we first analyse a standard distributed adaptive control law and reveal local stability conditions that guarantee the boundedness of the closed-loop system trajectories. We next synthesise fixed and adaptive robustifying terms to show relaxed local stability conditions. We also show that the fixed robustifying term can yield high-gain parameters in the resulting control signals, where the adaptive robustifying term removes this high-gain requirement. Finally, an illustrative numerical example is further presented to compare the proposed methods and demonstrate our theoretical contributions. [ABSTRACT FROM AUTHOR]

Copyright of Electric Machines & Control / Dianji Yu Kongzhi Xuebao is the property of Electric Machines & Control and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Due to its high power-to-weight ratio, low weight, and silent operation, shape memory alloy (SMA) is widely used as a muscle-like soft actuator in intelligent bionic robot systems. However, hysteresis nonlinearity and multi-valued mapping behavior can severely impact trajectory tracking accuracy. This paper proposes an adaptive nonsingular fast terminal sliding mode control (ANFTSMC) scheme aimed at enhancing position tracking performance in SMA-actuated systems by addressing hysteresis nonlinearity, uncertain dynamics, and external disturbances. Firstly, a simplified third-order actuator model is developed and a variable gain extended state observer (VGESO) is employed to estimate unmodeled dynamics and external disturbances within finite time. Secondly, a novel nonsingular fast terminal sliding mode control (NFTSMC) law is designed to overcome singularity issues, reduce chattering, and guarantee finite-time convergence of the system states. Finally, the ANFTSMC scheme, integrating NFTSMC with VGESO, is proposed to achieve precise position tracking for the prosthetic hand. The convergence of the closed-loop control system is validated using Lyapunov's stability theory. Experimental results demonstrate that the external pulse disturbance error of ANFTSMC is 8.19°, compared to 19.21° for the comparative method. Furthermore, the maximum absolute error for ANFTSMC is 0.63°, whereas the comparative method shows a maximum absolute error of 1.03°. These results underscore the superior performance of the proposed ANFTSMC algorithm. [ABSTRACT FROM AUTHOR]

This study explores the security control challenges encountered in cyber-physical systems when facing unknown nonlinearities and network attacks. It adopts an approach integrating observer-based adaptive sliding mode control and a threshold-changing event-triggered mechanism. Initially, a sliding mode function is formulated utilizing observer state, leading to the derivation of error dynamics and sliding mode dynamics. Subsequently, conditions ensuring stability of the closed-loop system are established through Lyapunov theory, expressed in terms of linear matrix inequalities. To achieve finite-time reaching of the predefined sliding surface, an observer-based adaptive controller is designed. Finally, the effectiveness of the proposed methodology is validated through a practical example. [ABSTRACT FROM AUTHOR]

This paper is devoted to the event-triggered consensus control for a class of uncertain multiple Euler-Lagrange (EL) systems with actuator faults. Different from the related works where strict conditions are imposed on system uncertainties and the measurements of the leader's output, more serious uncertainties are involved since all the system dynamic matrices are unknown while both actuator faults and external disturbance are considered; and moreover, fewer measurements of the leader's output are required since its time derivatives are not necessarily available for feedback. Mainly because of these, the consensus problem is hard to solve by straightforwardly extending the existing results. To solve the control problem, a dynamic gain with a smart choice of its updating law is introduced to overcome the serious uncertainties and the sampling error of the control signal. By incorporating the dynamic gain into the vectorial backstepping procedure, an adaptive consensus controller joined with an event-triggered mechanism is designed for each follower to ensure the consensus of the multi-agent system in the sense that all the states of the closed-loop system are bounded while the output of each follower tracks the leader's output. Finally, the effectiveness of the proposed method is verified by a simulation example. [ABSTRACT FROM AUTHOR]

A novel cascade visual control scheme is proposed to tailor for electrically driven robotic manipulators that operate under kinematic and dynamic uncertainties, utilizing an uncalibrated stationary camera. The proposed control approach incorporates adaptive weight radial basis function neural networks (RBFNNs) to learn the behaviors of the uncertain dynamics of the robot and the joint actuators. The controllers are designed to nullify the approximation error and mitigate unknown disturbances through an integrated robust adaptive mechanism. A major advantage of the proposed approach is that prior knowledge of the dynamics of the robotic manipulator and its actuator is no longer required. The controller autonomously assimilates the robot and actuator dynamics online, thereby obviating the need for fussy regression matrix derivation and advance dynamic measurement to establish the adaptive dynamic parameter update algorithm. The proposed scheme ensures closed-loop system stability, bounded system states, and the convergence of tracking errors to zero. Simulation results, employing a PUMA manipulator as a testbed, substantiate the viability of the proposed control policy. [ABSTRACT FROM AUTHOR]

This article presents a novel adaptive composite learning (ACL) control strategy combining reinforcement learning and a disturbance observer (DOB) to address vibration issues in a flexible two‐link manipulator (FTLM) system affected by unknown spatiotemporally varying disturbances. Based on the assumed mode method, the FTLM system is initially transformed into an ordinary differential equation model, while effectively capturing the elastic deformation and vibration characteristics of the flexible link. A composite learning controller, based on the actor‐critic algorithm and DOB, is then developed to achieve trajectory tracking and vibration suppression in the FTLM system. The DOB in the controller compensates for unknown disturbances resulting in reduced system error. It is noting that the proposed optimal control strategy is continuously gathering system experience and evaluating the current policy's effectiveness. The stability and robustness of the closed‐loop system incorporating the composite controller are analyzed using Lyapunov's direct method, and the semi‐global uniform ultimate boundedness of the tracking and vibration errors are also demonstrated. To validate the effectiveness and superiority of the proposed ACL controller, comparative simulations and experiments are conducted on the Quanser experimental platform. [ABSTRACT FROM AUTHOR]

In this paper, the problem of sampled-data adaptive tracking control for a class of switched nonlinear systems with prescribed performance is considered. In order to guarantee the system is stable and achieves the prescribed performance in sampled-data control, a coordinate transformation satisfying the prescribed performance is introduced. In addition, the neural networks (NNs) used to approximate the unknown nonlinear functions and the backstepping technique are applied to design the sampled-data controller and the adaptive laws. An upper bound on the sampling period is obtained to maintain the stability of the systems. It is confirmed that the designed sampled-data scheme ensures that all signals of the closed-loop system are semi-globally uniformly ultimately bounded (SGUUB) and the tracking error is limited to the prescribed performance function. The effectiveness of the designed control scheme is demonstrated by two simulation examples. [ABSTRACT FROM AUTHOR]

This paper proposes a "planning and control" scheme for a compliant mechanism (CM) based on a pneumatic actuator (PAC) with hysteresis nonlinearity and full-state constraints. In the planning part, a novel direct inverse model is presented to compensate for hysteresis nonlinearity, enabling more accurate planning of the desired air pressure based on the desired contact force. In the control part, by fusing fuzzy logic systems (FLSs) and an extended state observer (ESO), a fuzzy ESO is developed to observe the external disturbance and the rate of change of the air pressure. Additionally, the challenges in the controller design caused by full-state constraints are overcome by constructing barrier Lyapunov functions (BLFs). It is proved that all signals of the closed-loop system are bounded, and the tracking error of the air pressure can converge to a small neighborhood of the origin. Finally, the effectiveness and robustness of the proposed method are verified by hardware experiments, which also show that the root mean square errors of force control accuracies are within 2N, achieving satisfactory force control effects. [ABSTRACT FROM AUTHOR]

Copyright of Control Theory & Applications / Kongzhi Lilun Yu Yinyong is the property of Editorial Department of Control Theory & Applications and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper addressed the adaptive control problem for non-strict-feedback nonlinear systems with dead-zone and external disturbances. The design methodology integrated the backstepping technique with the approximation of unknown functions using an echo state network (ESN), enabling real-time adjustments. A comprehensive Lyapunov stability study was conducted to confirm the semi-globally uniformly ultimately boundedness (SGUUB) of all signals in the closed-loop system, ensuring that the tracking error converged to a small neighborhood of the origin. The effectiveness of the proposed method was further demonstrated through two examples, and error assessment criteria were utilized for comparisons with existing controllers. [ABSTRACT FROM AUTHOR]

This paper introduces an adaptive trajectory-tracking control method for uncertain nonlinear systems, leveraging a time-varying threshold event-triggered mechanism to achieve predefined-time tracking. Compared to conventional time-triggering approaches, the employment of a time-varying threshold event-triggered mechanism significantly curtails communication resource wastage without compromising the system's performance. Furthermore, a novel adaptive control algorithm with predefined timing is introduced. This method guarantees that tracking errors converge to within a small vicinity of the origin within a predefined timeframe, ensuring all signals in the closed-loop system remain bounded. Moreover, by adjusting a controller-related parameter, we can predefine the upper bound of the convergence time. Finally, the efficacy of the control scheme is corroborated by simulation results obtained from a nonlinear manipulator system. [ABSTRACT FROM AUTHOR]

The concurrent existence of model uncertainties, external disturbances, and actuator faults in a nonlinear system such as a robotic manipulator can significantly affect the trajectory tracking performance of these systems. Therefore this study is devoted to proposing a control approach based on fixed‐time control theory to improve the trajectory tracking performance of the robotic manipulator in the presence of lumped disturbance, including uncertainties, external disturbances, and actuator faults. The control approach in this paper is designed based on the integration of a fixed‐time adaptive sliding mode observer and a fixed‐time non‐singular fast terminal sliding mode control design strategy. Firstly, a new fixed‐time adaptive sliding mode observer is designed based on fixed‐time theory and adaptive control theory to estimate the lumped disturbance present in the system. Then, using the information from the disturbance observer, the fixed‐time non‐singular fast terminal sliding mode control is devised based on a non‐singular fixed‐time sliding surface and a fixed‐time reaching approach. Furthermore, in the sense of the Lyapunov theorem, through rigorous analysis, it is demonstrated that the tracking errors of the closed‐loop system converge to a small neighbourhood within a fixed time, regardless of the information about the initial conditions of the states of the system. Finally, extensive comparative simulations are performed using the PUMA560 robot to manifest the feasibility and validity of the proposed control strategy in terms of trajectory tracking accuracy and fast convergence in the presence of uncertainties, disturbances, and actuator faults. [ABSTRACT FROM AUTHOR]

Summary: Rock drilling jumbo is an important large construction machine used for tunneling construction, and its automation has an urgent demand in engineering. However, the electro‐hydraulic system of the rock drilling jumbo has strong parameters uncertainties and some dynamics that are hard to model accurately, which causes certain challenges for designing model‐based high‐performance control algorithms. To solve these challenges, a parameter adaptive based neural network sliding mode control algorithm is proposed to enhance control performance of the electro‐hydraulic system. The parameter adaptive law is developed to estimate unknown parameters of the system, the neural network is applied for compensating unmodeled dynamics, and then the final control law is designed by sliding mode control method, and the stability demonstration of the closed‐loop system is given. In the simulations, the effectiveness of the designed parameter adaptive law is verified. Extensive comparison experiments are performed on a real rock drilling jumbo driven by proportional valves, the experimental results demonstrate that the developed control algorithm obviously improves the control precision of hydraulic cylinder of the rock drilling jumbo compared with the traditional sliding mode and PID control algorithm, thus the designed control algorithm can be expanded and applied for general hydraulic servo control mechanism. [ABSTRACT FROM AUTHOR]

Wind energy is an environmentally friendly renewable resource, widely regarded as one of the most effective means to achieve sustainable development goals. A large number of variable-speed wind turbines (WT) around the world utilize double fed induction generators (DFIG). In the typical configuration of these systems, the stator is connected directly to the grid, while the wound rotor is powered via a bidirectional converter. This DFIG-WT configuration is effective for converting wind power due to several advantages: it operates at various speeds while keeping the stator frequency synchronized with the grid, supports both sub-synchronous and super-synchronous operating modes, and features a power converter that is minimized on the rotor side. Controlling such system presents a challenging engineering problem due to their nonlinear and interconnected dynamic models. The DFIG-WT must operate under severe operating conditions such as stochastic wind variations and parametric changes. Numerous robust controllers have been developed for DFIG-WT, focusing on achieving asymptotic stability in closed-loop control systems to ensure tracking error convergence over infinite time. Ensuring finite-time error convergence is essential in practice. This paper introduces a new adaptive neural network finite-time control approach for a variable-speed DFIG-WT. The main control objective is power extraction maximization while enhancing the wind energy system performance regarding convergence rate, tracking precision, and robustness to uncertainties. The proposed control approach utilizes adaptive neural network systems to handle system uncertainties effectively. The closed-loop control system finite-time stability is thoroughly confirmed and established through rigorous verification using the concept of finite-time Lyapunov stability of nonlinear systems. The effectiveness of the suggested controller is validated in numerical simulation using the Matlab/Simulink software. [ABSTRACT FROM AUTHOR]

Unknown actuator failures are inevitable in practical systems. At the same time, time delay exists in many physical actuators, and the system performance will be affected by such actuator delay and faults. However, the results of studies that attempt to compensate for unknown failures of actuators with time delay are still very limited. In this paper, such a problem is studied, and an adaptive control scheme is proposed based on backstepping approaches. First, the input delay of actuator faults and output disturbances are transformed into unknown effects on the output signal. In the backstepping recursive design, these unknown effects will accumulate to the last step of the controller design. Then, a new Lyapunov function is constructed by introducing auxiliary signals to prove the stability of the system. It is shown that the proposed control scheme can compensate for the effects caused by unknown actuator failures and input delays. The stability of the closed-loop system can be guaranteed by this adaptive controller. Finally, simulation studies are used to verify the effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

Copyright of China Mechanical Engineering is the property of Editorial Board of China Mechanical Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Friction nonlinearity and uncertainty are the main factors affecting the highly performance control of electromagnetic actuators. In this paper, a nonlinear adaptive robust control strategy is proposed of electromagnetic actuators with friction nonlinearity and uncertainty compensation. First, the dynamical model of the electromagnetic actuator is established considering nonlinearity and uncertainty. Then, an adaptive robust controller is designed based on the continuously differentiable friction model to ensure that the control input is continuously and bounded. In the design of the controller, the unfavorable effects of unknown parameters in the electromagnetic actuator are eliminated by constructing a parameter adaptive law. Meanwhile, in order to improve the tracking accuracy of the electromagnetic actuator, a nonlinear robust control law is designed to ensure the robustness of the controller. The stability analysis by Lyapunov function shows that the asymptotic tracking effect can be obtained when only parameter uncertainty exists in the closed-loop system of the electromagnetic actuator, and the consistent bounded stability can be ensured when the system also exists uncertain nonlinearity. Extensive comparative results verify the effectiveness of the proposed control method. [ABSTRACT FROM AUTHOR]

The problem of adaptive output feedback control for a class of nonlinear Cyber-Physical Systems(CPSs) with unknown control direction under sensor and actuator attacks is studied. By implementing a suitable linear state transformation, the original system is transformed into a new system for facilitating the design of output feedback controller. Nussbaum gain function method is adopted to overcome the design difficulty resulted from unknown control coefficients and network attacks. Based on the state estimate and the attacked measurement output signal, a new event-triggered adaptive output-feedback control strategy is proposed by means of neural network approximation method. The proposed controller can not only achieve the semi-globally uniformly ultimately boundedness of the closed-loop system, but also greatly reduce the number of transmitted data. In addition, the "complexity explosion" problem in backstepping design can be overcome by means of the dynamic surface control (DSC) method based on a nonlinear filter. Finally, a robotic arm system is utilized to verify the effectiveness and practicality of the proposed control method. [ABSTRACT FROM AUTHOR]

Point‐to‐point control of underactuated mechanical systems is a challenging problem, especially if some of the system's parameters are uncertain. A popular method to stabilize underactuated manipulators is total energy shaping, in which a new Hamiltonian function is assigned to the closed‐loop system while a set of partial differential equations (PDEs) should be solved. In this study, an adaptive total energy shaping controller based on the approach called interconnection and damping assignment passivity‐based control (IDA‐PBC) for some underactuated robots is designed. The proposed method can overcome uncertainties in the dynamical parameters and also the parameters of the input mapping matrix under the satisfaction of the PDEs. The stability of the desired pose is ensured by the Lyapunov approach via suitable design of adaptation laws without the requirement for the persistence of excitation condition or other similar conditions. The results are applied to a 3‐DOF underactuated manipulator and verified by simulations. [ABSTRACT FROM AUTHOR]

The issue of prescribed time adaptive fuzzy output-feedback event-triggered control strategy subject to bounded disturbances is considered in this paper. For the unmeasured states, an adaptive fuzzy observer is designed to estimate them. Then, a novel event-triggering condition involving a decreasing function containing the error between the system states is designed by synthesising the backstepping design framework and command filtered technique. The developed prescribed finite time control approach ensures that all signals of the closed-loop system are bounded and the tracking error remains within the predefined bound in the prescribed time. Meanwhile, Zeno phenomenon can be avoided. Finally, a mass-spring-damper system is taken as an example for simulation. [ABSTRACT FROM AUTHOR]

This work focuses on the issue of designing a fixed-time fuzzy adaptive controller for variable-speed doubly fed induction generator-based wind turbine. The main goal is to optimize the wind turbine power production, while improving the performance of the overall control system such as, convergence speed, tracking accuracy, and robustness. For the control design, the backstepping technique is adopted, and fuzzy adaptive systems are employed as universal approximators to estimate continuous functional uncertainties. Using fixed–time stability concept, a detailed mathematical stability proof of the closed-loop control system is performed. Simulation results are presented to testify the efficiency of the designed control approach. [ABSTRACT FROM AUTHOR]

Summary: This article investigates an adaptive fast finite‐time tracking control problem for a class of uncertain nonlinear systems with output hysteresis. The idea of output hysteresis compensation is skillfully extended to adaptive design by employing a hysteresis inverse transformation and barrier Lyapunov function. The backstepping technique is adopted to establish the fast finite‐time control strategy, which can realize finite‐time convergence of the closed‐loop system. A rigorous theoretical analysis is performed to illustrate that the signals in the closed‐loop systems are bounded in finite time, and the tracking error can converge into a compact set with sufficient accuracy. Finally, a numerical simulation is given to confirm the effectiveness of the presented strategy. [ABSTRACT FROM AUTHOR]

It is well known that unknown modeling errors cannot be avoided in practice. Such unmeasured uncertainties are usually denoted as unknown nonlinear functions that exist in every channel of the system equation. This paper aims to develop an output feedback adaptive control scheme by constructing state estimation filters to address such unknown modeling errors. In the controller design, these uncertainties caused by modeling errors will be accumulated to the last step for compensation. Unknown parameters existing in the upper bound functions of unknown nonlinear functions and system parameters are estimated synchronously based on tuning function approaches. It is shown that the designed output feedback controller can ensure the stability and tracking performance of the closed‐loop system, and the transient performance in terms of a truncated norm is also established. [ABSTRACT FROM AUTHOR]

This paper proposes an adaptive neural control strategy for stochastic microelectromechanical system (MEMS) gyroscopes, aiming to achieve a prescribed performance in a finite time. The radial basis function neural network is introduced to address the system's unknown nonlinear dynamics and stochastic disturbances. Then, the technology of finite-time prescribed performance function, along with the method of command-filtered backstepping design, is utilized to ensure both transient and steady-state performance and simultaneously solve the problem of "explosion of complexity." Moreover, a switching threshold event-triggered control law is proposed to cut down on communication resources and eliminate corresponding parametric inequality restrictions. The proposed adaptive state feedback control strategy is able to guarantee that the output tracking error converges to a prescribed, arbitrarily small residual set. Additionally, the closed-loop system's signals can be semi-globally ultimately uniformly bounded in probability. Finally, numerical simulations demonstrate the effectiveness and superiority of the proposed strategy. • This study constructs a stochastic model for MEMS gyroscopes. • This study ensures practical finite-time tracking performance. • The study integrates a novel nonconservative event-triggered mechanism. • This study underscore the significance of command filter-based backstepping design. [ABSTRACT FROM AUTHOR]

This paper is concerned with the parameter estimation and adaptive control problem for a sort of strict‐feedback nonlinear systems with unknown parameters. In order to deal with the nonlinear functions, we develop a kind of least‐squares estimator in the parameter estimation part. With such an estimator, we design the state‐feedback control law and analyze the properties of the closed‐loop system. To be concrete, the parameter estimator can guarantee the boundedness of parameter estimate error. At the same time, the adaptive control law is proposed to make the system states converge to zero and the equilibrium stable globally under some common assumptions. Finally, simulations are given to demonstrate the theoretical results. [ABSTRACT FROM AUTHOR]

This paper considers the adaptive guaranteed cost tracking (AGCT) control problems for two classes of high-order nonlinear systems with unknown parameters. A new local smooth nonlinear function (LSNF) is introduced first, which provides an important mathematical tool for our controller design. Then, based on the LSNF and the high-order fully actuated (HOFA) system approaches, the AGCT controller is designed for HOFA system with unknown parameter, which guarantees that all of the states of the closed-loop HOFA system are globally bounded, and the tracking error is asymptotically convergent. Moreover, the upper bound of cost function (UBCF) characterizing the tracking performance can be arbitrarily preseted, and is completely independent of the system initial value and the unknown parameter, which significantly improves the tracking performance, and is difficult to achieve by using existing guaranteed cost control (GCC). Furthermore, an extra result, the AGCT controller for a class of strict-feedback systems with high-order form and unknown parameters, is obtained in this paper, which also guarantees that the system tracking error is globally asymptotically convergent with the arbitrarily preseted UBCF characterizing the tracking performance. Three simulation examples, including an inverted pendulum, are presented to show the effect and the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

This article addresses the event‐triggered adaptive consensus control of nonlinear multi‐agent systems with unknown control direction and actuator saturation. A new robust adaptive control algorithm based on an event‐triggered mechanism is designed. The smooth Lipschitz function approximates the saturated nonlinear function, while the Nussbaum function handles unknown control directions and residual terms. The event‐triggered mechanism is designed to determine the time of communication, significantly reducing the communication burden. An additional estimator is utilized to deal with unknown parameters involved in neighbor dynamics and prevent information exchange to consistency errors between connected subsystems. The results show that all the signals of the closed‐loop system are uniformly bounded, and the consensus tracking error converges to a bounded set. Meanwhile, Zeno's behavior is eliminated. Simulation results confirm the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

To reduce the learning time and space occupation, this study presents a novel model‐free algorithm for obtaining the Nash equilibrium solution of continuous‐time nonlinear non‐zero‐sum games. Based on the integral reinforcement learning method, a new integral HJ equation that can quickly and cooperatively determine the Nash equilibrium strategies of all players is proposed. By leveraging the neural network approximation and gradient descent method, simultaneous continuous‐time adaptive tuning laws are provided for both critic and actor neural network weights. These laws facilitate the estimation of the optimal value function and optimal policy without requiring knowledge or identification of the system's dynamics. The closed‐loop system stability and convergence of weights are guaranteed through the Lyapunov analysis. Additionally, the algorithm is enhanced to reduce the number of auxiliary NNs used in the critic. The simulation results for a two‐player non‐zero‐sum game validate the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper addresses the tracking control for an extended chained nonholonomic system under input saturation and matched disturbances. Specifically, the tracking error dynamic system is split into two subsystems in a cascade form. An integral sliding mode saturated controller is designed in combination with a finite‐time observer (FTDO) to ensure the finite‐time stability of the first subsystem, thereby simplifying the design of the second subsystem. A backstepping‐based adaptive saturated tracking control method is proposed for the second subsystem by incorporating the filter technology. The stability of the resulting closed‐loop system is demonstrated, and the tracking errors can be arbitrarily minimized through the appropriate design parameter selection. The effectiveness of the proposed scheme is validated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

Summary: In this article, we address the problem of achieving predefined‐time control for a class of nonlinear dynamical systems with parameter uncertainties. We introduce an adaptive predefined‐time control algorithm based on integrator backstepping for n$$ n $$th order nonlinear systems. Using Lyapunov's stability theory, we establish that the proposed predefined time control approach, combined with an adaptive law, ensures the boundedness of all signals within the closed‐loop system. A notable advantage of our method is its potential to achieve convergence within a predetermined time frame. To validate our approach's efficacy, we present a practical example involving a 2 DOF helicopter, demonstrating the effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

Summary: This paper introduces a novel fully actuated multirotor unmanned aerial vehicle (UAV) and develops an adaptive control scheme for it without relying on velocity signals. Conventional multirotors are limited by their strong coupling between translation and rotation motion, which makes it difficult to operate one motion without affecting the other. However, this novel multirotor's fully actuated design allows for independent translation and rotation motion, leading to better operational performance and expanded application scope. Additionally, velocity measurement signals can be prone to noise pollution and signal drift, making them unreliable for control purposes. Therefore, this proposed control scheme is developed without using velocity signals. The study utilizes a control performance improving method and guarantees stability of the closed‐loop system using the direct Lyapunov method. Finally, numerical simulations are employed to demonstrate the effectiveness of the proposed control scheme. [ABSTRACT FROM AUTHOR]

This work introduces a novel adaptive fixed-time control strategy for nonlinear systems subject to external disturbances. The focus pertains to the introduction of the fixed-time terminal sliding mode control (FxSMC) technique. The proposed scheme exhibits rapid convergence, chatter-free and smooth control inputs, and stability within a fixed time. The utilization of an adaptive methodology in combination with the FxSMC yields the proposed strategy. This approach is employed to address the dynamic system in the presence of external disturbances. The results obtained from the Lyapunov analysis will provide insights into the stability of the closed-loop system in a fixed time. In the end, the simulation results are presented in order to assess and demonstrate the effectiveness of the methodology. [ABSTRACT FROM AUTHOR]

In this article, we develop a new adaptive event‐triggered asymptotic control scheme for strict‐feedback systems with fast time‐varying parameters. To deal with time‐varying parameters with unknown variation boundaries in the feedback path and the input path, we construct three adaptive laws for parameter estimation, two for the uncertain parameters in the feedback path and one for the uncertain parameters in the input path. In particular, two sets of tuning functions are introduced to avoid over‐parametrization. Additionally, an event‐triggering mechanism is embedded in this adaptive control framework to reduce the data transmission from the controller to the actuator. We also introduce a soft sign function to handle the perturbations caused by sampling errors to achieve asymptotic stability and avoid the so‐called parameter drift. The stability analysis shows that the closed‐loop system is globally uniformly asymptotically stable and the Zeno behavior can be excluded. Simulation results verify the effectiveness and performance of the proposed adaptive scheme. [ABSTRACT FROM AUTHOR]

This paper proposes a Modified model reference adaptive controller and observer (MMRACO) for unknown linear time‐invariant (LTI) systems. The recent literature, and in particular the so‐called MRACO approach, has demonstrated how some deficiencies in standard model reference adaptive control can be overcome by using a combination of modified reference models and observers, but this is done at the expense of knowing bounds on certain unknown parameters. Here, a novel adaptive observer/controller combination is presented which removes the need to know the above bounds but preserves the other desirable features of the MRACO approach. A Lyapunov analysis of the closed‐loop system ensures asymptotic convergence of both tracking and observer errors, with uniform boundedness of parameter estimation errors. A key advantage of the scheme is that the design involves only solutions of two Lyapunov equations (or linear matrix inequalities) and does not require the selection of a "high gain" parameter. The effectiveness of the approach is illustrated in some numerical examples. [ABSTRACT FROM AUTHOR]

The paper expounds the question of echo state network‐based fixed‐time adaptive tracking control for a type of multi‐input multi‐output nonlinear strict‐feedback system with input delayed saturation. Based on the feature that echo state network can obtain better estimation performance at lower computational cost, it is utilized to approximate the unknown nonlinear function in the controller design course. By constructing an auxiliary system, a time‐delay system with input saturation is eliminated. Moreover, command filtering techniques can be applied to avoid the "complexity explosion" problem in the backstepping method. Then, the closed‐loop system is attested to be semi‐global practical fixed‐time stable. In the end, a simulation shows the valid scheme. [ABSTRACT FROM AUTHOR]

Summary: It is well known that all practical control systems are subject to external disturbances. Therefore, a feedback controller should be designed so that the closed‐loop system has some desired properties such as stability, good tracking performance, at the same time, the impact of external disturbances on the performance of the closed‐loop system is attenuated to some degree. On the other hand, almost all models for real fully actuated systems, which are derived based on the physical laws, are described by a set of high order differential equations. The traditional method for controlling these fully actuated systems is to convert the high order differential equations to first order differential equations, which are called the state equations, and then to design feedback controllers by using the state‐space design methods. Such conversion causes some inconveniences. To overcome such inconveniences, a high‐order fully actuated (HOFA) design method has been proposed to control HOFA systems. The main goal of this paper is to design a weak disturbance decoupling controller for HOFA nonlinear systems to guarantee the stability and desired output tracking performance of the closed‐loop system and to attenuate the impact of disturbances. [ABSTRACT FROM AUTHOR]

Summary: In this paper, the adaptive control is investigated by switching linear controllers for a class of nonlinear parameterized systems with multiple unknown control directions. Parametric uncertainties entering the state equations nonlinearly can be fast time‐varying or jumping at unknown time instants, the bounds of the parametric uncertainties are not required to know a priori and the multiple control directions are unknown. Our proposed adaptive controller is a switching type controller. First, sufficient conditions for designing an adaptive stabilizer are derived. Then, a switching‐type adaptive controller is designed, in which a linear controller with two undetermined design parameters to be tuned is recursively designed by adding a power integrator, and a switching mechanism is proposed to tune these parameters online for compensating the multiple unknown control directions and the unknown bounds of the parametric uncertainties. The undetermined design parameters are based on the upper bound estimation of the unknown parameters existing not only in the nonlinear functions but also in the control directions functions. The proposed adaptive controller globally asymptotically stabilizes the system in the sense that, for any initial conditions, the state converges to the origin while all the signals of the closed‐loop system are bounded. Finally, an example is given to illustrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The problem of adaptive fault-tolerant fixed-time control is studied for a class of strict-feedback nonlinear systems with multiple faults and multiple disturbances. We incorporate the tuning functions and the command filter technique into the controller design. Note that the former reduces the order of the controller, and the latter simplifies the derivation and calculation process and avoids the high calculation cost and differential explosion. In addition, since our proposed strategy is based on fixed-time control, it can ensure that the closed-loop system keeps the practically fixed-time stable, and the tracking error converges to a small neighborhood near the origin within fixed-time. As for the unknown items in the systems, fuzzy logic systems are used to approximate them. The simulation results show that the proposed control strategy is effective even if there exist actuator faults and multiple disturbances. [ABSTRACT FROM AUTHOR]

This paper investigates the adaptive guaranteed cost stabilization (AGCS) problems for two classes of high-order nonlinear systems with unknown parameters (vector) and time delays. Firstly, based on the high-order fully actuated (HOFA) system approaches, the Lyapunov–Krasovskii functional (LKF) and the guaranteed cost control (GCC), a new AGCS strategy is proposed for HOFA nonlinear system with unknown parameter vector and time delays. Then, based on the above result, another AGCS controller for a class of strict-feedback systems (SFSs) with unknown parameters and time delays is obtained. Two designed controllers ensure that all of the states of two closed-loop systems are global boundedness, and preset arbitrarily the upper bound of cost functions (UBCFs) characterizing the output performance. More importantly, the UBCFs are independent of system initial values, unknown parameters (vector), and even time delays, which is difficult to achieve by using existing control methods. To do this, this paper introduces a local smooth nonlinear function (LSNF), and gives its corresponding lemma, which provide an important mathematical tool. Finally, three simulation examples, including an application in the electromechanical system, are given to prove the effectiveness and the practicability of our proposed control method. [ABSTRACT FROM AUTHOR]

In this paper, we investigate lifelong learning (LL)‐based tracking control for partially uncertain strict feedback nonlinear systems with state constraints, employing a singular value decomposition (SVD) of the multilayer neural networks (MNNs) activation function based weight tuning scheme. The novel SVD‐based approach extends the MNN weight tuning to n$$ n $$ layers. A unique online LL method, based on tracking error, is integrated into the MNN weight update laws to counteract catastrophic forgetting. To adeptly address constraints for safety assurances, taking into account the effects caused by disturbances, we utilize a time‐varying barrier Lyapunov function (TBLF) that ensures a uniformly ultimately bounded closed‐loop system. The effectiveness of the proposed safe LL MNN approach is demonstrated through a leader‐follower formation scenario involving unknown kinematics and dynamics. Supporting simulation results of mobile robot formation control are provided, confirming the theoretical findings. [ABSTRACT FROM AUTHOR]

Rehabilitation robotics has seen growing popularity in recent years due to its immense potential for improving the lives of people with disabilities. However, the complex, uncertain dynamics of these systems present significant control challenges, requiring advanced techniques. This paper introduces a novel adaptive control framework integrating modified function approximation (MFAT) and double-integral non-singular terminal sliding mode control (DINTSMC). The goal is to achieve precise tracking performance, high robustness, a fast response, a finite convergence time, reduced chattering, and effective handling of unknown system dynamics. A key feature is the incorporation of a higher-order sliding mode observer, eliminating the need for velocity feedback. This provides a new solution for overcoming the inherent variations and uncertainties in robot manipulators, enabling improved accuracy within fixed convergence times. The efficacy of the proposed approach was validated through simulations and experiments on an exoskeleton robot. The results successfully demonstrated the controller's effectiveness. Stability analysis using Lyapunov theory proved the closed-loop system's uniform ultimate boundedness. This contribution is expected to enable enhanced control for rehabilitation robots and improved patient outcomes. [ABSTRACT FROM AUTHOR]

In this paper, an adaptive prescribed finite-time asymptotic tracking control problem is considered for the unknown nonlinear switched systems with unknown initial conditions and full-state constraints. A class of nonlinear mappings (NMs) and a new prescribed finite-time performance function (PFTPF) are introduced so that the control design is independent of initial conditions of the controlled states. Based on the neural network approximation approach, NMs, PFTPF and the Barbalat's lemma, an adaptive prescribed finite-time asymptotic tracking controller with full-state constraints is obtained. To avoid overlarge initial control input, the design method with zero initial control input is adopted, the definition of input tuning function (ITF) is expanded and its effectiveness is proved theoretically. As results, the full-state constraints and the boundedness of all the signals in the closed-loop system are guaranteed, and the tracking error of the system can converge to zero asymptotically. Finally, the effectiveness and superiority of the proposed scheme are verified by the simulation results. [ABSTRACT FROM AUTHOR]

Summary: This paper is concerned with the adaptive neural network event‐triggered control (ETC) problem for stochastic nonlinear systems with output constraint. The influence of stochastic disturbance inevitably exists in many practical systems, which leads to system instability. Meanwhile, a novel tan type barrier Lyapunov function (Tan‐BLF) structure is proposed to deal with the constraint requirements of stochastic systems. In the sense of probability, the output constraints will not be violated during the operation of the system. In addition, the ETC strategy is adopted to reduce the burden of communication. The asymptotic stability of the closed‐loop system is guaranteed without violating output constraints. Meanwhile, the tracking error converges to a small region of the origin. Two simulations results demonstrate the effectiveness of theoretical analysis. [ABSTRACT FROM AUTHOR]

This paper aims to improve the tracking control performance of the three-stage valve (TSV) controlled electro-hydraulic servo system (EHSS) with parameter uncertainties and other lumped unknown nonlinearities, including unknown dynamics and disturbances. A more accurate nonlinear model of the TSV-controlled EHSS is established and a neural network-based finite-time command-filtered adaptive backstepping control (NNFCABC) method is proposed for the EHSS. Adaptive control is used to deal with the system parameter uncertainties, and the radial basis function neural network (RBFNN) algorithm is introduced to approximate the lumped unknown nonlinearities. The prediction errors of serial-parallel estimation models (SPEMs) and the tracking errors are utilized together to design adaptive laws to estimate the system parameters and the weights of the RBFNNs. The entire control framework utilizes command-filtered control and backstepping techniques. By applying Levant differentiators as command filters and introducing fractional power terms into the virtual control laws and the SPEMs, the proposed NNFCABC theoretically guarantees the tracking performance of the closed-loop control system with finite-time convergence. Comparative simulations and experiments verify the feasibility and superiority of the proposed control scheme. • A more accurate model of the three-stage valve is built. • Neural network and adaptive control are combined under command-filtered technology. • The finite-time convergence of all signals in the system is achieved. • Simulations and experiments have verified the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

One of the open problems in modern control theory is synthesis of adaptive control for nonlinear systems with parametric uncertainty and analysis of stability of the corresponding closed-loop system. Fuzzy logic is one of the approaches that can take into account nonlinearity and uncertainty of the plant. Affine systems constitute a class of nonlinear systems often used to solve various practical problems. For this class, there are a number of methods for synthesis of controllers, in particular, a method based on the matrix Riccati equation with state-dependent coefficients. In this paper, for a given class of nonlinear systems, an adaptation mechanism of a neuro-fuzzy controller that approximates the control synthesized by the SDRE method is used for the first time. The main contribution of this work is the architecture of the neuro-fuzzy network and methods for its initialization. The proposed approach is applied to the model of a two-link manipulator with uncertain coefficients. The conducted numerical experiments demonstrate the effectiveness of the synthesized control in terms of the selected quality criteria. [ABSTRACT FROM AUTHOR]

A prescribed performance neural network adaptive control scheme based on event-triggered mechanism is presented for a class of strict-feedback nonlinear systems with unmodeled dynamics. First, in order to improve the performance of system, finite-time performance function is introduced. The unknown nonlinear functions are approximated by radial basis function (RBF) neural networks. Then, an adaptive eventtriggered controller based on back-stepping is designed, which guarantees that all signals of the closed-loop system are semiglobally uniformly ultimately bounded (SGUUB). Meanwhile, the tracking error can converge to a prescribed range, and the Zeno-behavior can be avoided. Finally, simulation verifies the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]