Search

To quantitatively hydroxylate 8S- and 10S-positions on polyunsaturated fatty acids by recombinant Escherichia coli cells expressing mouse arachidonate 8S-lipoxygenase (8S-LOX). Hydroxylated products gained from the conversion of arachidonic acid (20:4Δ5Z,8Z,11Z,14Z, AA), eicosapentanoic acid (20:5Δ5Z,8Z,11Z,14Z,17Z, EPA), and (22:6Δ4Z,7Z,10Z,13Z,16Z,19Z, DHA) by recombinant E. coli cells containing 8S-LOX from mouse were identified as 8S-hydroxy-5,9,11,14(Z,E,Z,Z)-eicosatetranoic acid (8S-HETE), 8S-hydroxy-5,9,11,14,17(Z,E,Z,Z,Z)-eicosapentanoic acid (8S-HEPE), and 10S-hydroxy-4,8,12,14,16,19(Z,E,Z,Z,Z,Z)-docosahexaenoic acid (10S-HDoHE), respectively. Under the optimal hydroxylation conditions of pH 7.5, 30 °C, 5% (v/v) ethanol, 15 g cells l−1, and 5 mM substrate, AA, EPA, and DHA were hydroxylated into 4.37 mM 8S-HETE, 3.77 mM 8S-HEPE, and 3.13 mM 10S-HDoHE for 60, 90, and 60 min, with 87, 75, and 63% molar conversions, respectively. To the best of our knowledge, this is the first quantitatively biotechnological production of 8S-HETE, 8S-HEPE, and 10S-HDoHE.

This study was conducted to characterize recombinant α-l-rhamnosidase from Chloroflexus aurantiacus and apply the enzyme in the production of isoquercitrin from rutin. The α-l-rhamnosidase from C. aurantiacus was cloned and expressed in Escherichia coli BL21 and purified as a soluble enzyme. α-l-rhamnosidase purified from C. aurantiacus has a molecular mass of approximately 105 kDa and is predicted to exist as a homodimer with a native enzyme of 200 kDa. The purified enzyme exhibited the highest specific activity for rutin among the reported isoquercitrin producing α-l-rhamnosidases and was applied in the production of isoquercitrin from rutin. Under the optimised conditions of pH 6.0, 50 °C, 0.6 U mL−1 α-l-rhamnosidase, and 30 mM rutin, α-l-rhamnosidase from C. aurantiacus produced 30 mM isoquercitrin after 2 h with a 100% conversion yield and productivity of 15 mM h−1. We achieved a high productivity of isoquercitrin from rutin. Moreover, these results suggest that α-l-rhamnosidase from C. aurantiacus is an effective isoquercitrin producer.

Significant advances in enzyme discovery, protein and reaction engineering have transformed biocatalysis into a viable technology for the industrial scale manufacturing of chemicals. Multi-enzyme catalysis has emerged as a new frontier for the synthesis of complex chemicals. However, the in vitro operation of multiple enzymes simultaneously in one vessel poses challenges that require new strategies for increasing the operational performance of enzymatic cascade reactions. Chief among those strategies is enzyme co-immobilization. This review will explore how advances in synthetic biology and protein engineering have led to bioinspired co-localization strategies for the scaffolding and compartmentalization of enzymes. Emphasis will be placed on genetically encoded co-localization mechanisms as platforms for future autonomously self-organizing biocatalytic systems. Such genetically programmable systems could be produced by cell factories or emerging cell-free systems. Challenges and opportunities towards self-assembling, multifunctional biocatalytic materials will be discussed.

20(S)-Protopanaxadiol (APPD) has potential uses in the pharmaceutical, cosmetic, and food industries because of its anti-stress, anti-fatigue, anti-cancer, anti-inflammatory, and anti-wrinkle properties. However, APPD production is difficult because β-glycosidases that convert the protopanaxadiol (PPD)-type ginsenoside compound K to APPD are rare. β-Glycosidase from Dictyoglomus turgidum (DT-bgl) has the highest specific activity for converting compound K to APPD, but exhibits no activity towards the α-l-arabinopyranoside moiety in compound Y. Therefore, β-glycosidase from Caldicellulosiruptor bescii (CB-bgl), which has a strong α-l-arabinopyranosidase activity, was used along with DT-bgl. The volumetric and specific productivities of the two-enzyme system for APPD using ginseng root extract were 38.4- and 38.7-fold higher, respectively, than those of β-glycosidase from Pyrococcus furiosus, which had the highest volumetric productivity previously reported, at the same enzyme and substrate concentrations. Thus, DT-bgl combined with CB-bgl completely converted PPD-type ginsenosides to APPD with the highest volumetric and specific productivities reported thus far. Electronic supplementary material The online version of this article (10.1186/s13568-017-0524-9) contains supplementary material, which is available to authorized users.

The fatty acid compositions of 10 types of tree oils were analyzed and Camellia japonica (CJ), Tetradium daniellii (TD), and Hovenia dulcis (HD) tree oils were selected to be oleic acid (OA)-, linoleic acid (LA)-, and α-linoleic acid (ALA)-rich tree oils, respectively. Recombinant Escherichia coli expressing 10-hydratase and 7,8-diol synthase converted 31.7 and 15.6 g/L unsaturated fatty acids (UFAs) in OA-rich oil hydrolysates to 21.7 g/L 10-monohydroxy fatty acid (monoHFA) and 13.3 g/L 7,8-diHFA, respectively. The cells expressing 13-hydratase, 13-lipoxygenase, 5,8-diol synthase, and 8,11-diol synthase converted 42.8, 28.5, 10.0, and 20.0 g/L UFAs in LA-rich oil hydrolysates to 28.2 g/L 13-monoHFA, 11.8 g/L 13-monoHFA, 7.2 g/L 5,8-diHFA, and 8.9 g/L 8,11-diHFA, respectively. The cells expressing 8,11-diol synthase converted containing 17.5 g/L UFAs in ALA-rich oil hydrolysate to 7.5 g/L 8,11-diHFA. The average emulsifying activities of diHFArich and monoHFA-rich tree oil hydrolysates were 13.9- and 4.3-fold higher than those of tree oil hydrolysates, respectively. Thus, HFA-rich tree oil hydrolysates derived from tree oils can be applied as biosurfactants, and the fatty acid-rich residue as by-product obtained from the tree refinery process may be recycled into biosurfactants.

The phytochemical oxyresveratrol has been shown to exert diverse biological activities including prevention of obesity. However, the exact reason underlying the anti-obese effects of oxyresveratrol is not fully understood. Here, we investigated the effects and mechanism of oxyresveratrol in adipocytes and high-fat diet (HFD)-fed obese mice. Oxyresveratrol suppressed lipid accumulation and expression of adipocyte markers during the adipocyte differentiation of 3T3-L1 and C3H10T1/2 cells. Administration of oxyresveratrol in HFD-fed obese mice prevented body-weight gains, lowered adipose tissue weights, improved lipid profiles, and increased glucose tolerance. The anti-obese effects were linked to increases in energy expenditure and higher rectal temperatures without affecting food intake, fecal lipid content, and physical activity. The increased energy expenditure by oxyresveratrol was concordant with the induction of thermogenic genes including Ucp1, and the reduction of white adipocyte selective genes in adipose tissue. Furthermore, Foxo3a was identified as an oxyresveratrol-induced gene and it mimicked the effects of oxyresveratrol for induction of thermogenic genes and suppression of white adipocyte selective genes, suggesting the role of Foxo3a in oxyresveratrol-mediated anti-obese effects. Taken together, these data show that oxyresveratrol increases energy expenditure through the induction of thermogenic genes in adipose tissue and further implicates oxyresveratrol as an ingredient and Foxo3a as a molecular target for the development of functional foods in obesity and metabolic diseases.

The generally recognized as safe microorganism Corynebacterium glutamicum expressing Geobacillus thermodenitrificans d-galactose isomerase (d-GaI) was an efficient host for the production of d-tagatose, a functional sweetener. The d-tagatose production at 500 g/L d-galactose by the host was 1.4-fold higher than that by Escherichia coli expressing d-GaI. The d-tagatose-producing activity of permeabilized C. glutamicum (PCG) cells treated with 1% (w/v) Triton X-100 was 2.1-fold higher than that of untreated cells. Permeabilized and immobilized C. glutamicum (PICG) cells in 3% (w/v) alginate showed a 3.1-fold longer half-life at 50 °C and 3.1-fold higher total d-tagatose concentration in repeated batch reactions than PCG cells. PICG cells, which produced 165 g/L d-tagatose after 3 h, with a conversion of 55% (w/w) and a productivity of 55 g/L/h, showed significantly higher d-tagatose productivity than that reported for other cells. Thus, d-tagatose production by PICG cells may be an economical process to produce food-grade d-tagatose.

To increase the production of 10S-hydroxy-8(E)-octadecenoic acid from oleic acid by whole recombinant Escherichia coli cells expressing Nostoc punctiforme 10S-dioxygenase with the aid of a chaperone. The optimal conditions for 10S-hydroxy-8(E)-octadecenoic acid production by recombinant cells co-expressing chaperone plasmid were pH 9, 35 °C, 15 % (v/v) dimethyl sulfoxide, 40 g cells l−1, and 10 g oleic acid l−1. Under these conditions, recombinant cells co-expressing chaperone plasmid produced 7.2 g 10S-hydroxy-8(E)-octadecenoic acid l−1 within 30 min, with a conversion yield of 72 % (w/w) and a volumetric productivity of 14.4 g l−1 h−1. The activity of recombinant cells expressing 10S-dioxygenase was increased by 200 % with the aid of a chaperone, demonstrating the first biotechnological production of 10S-hydroxy-8(E)-octadecenoic acid using recombinant cells expressing 10S-dioxygenase.

Hydroxy fatty acids are used as precursors of lactones and dicarboxylic acids, as starting materials of polymers, and as additives in coatings and paintings. Stenotrophomonas nitritireducens efficiently converts cis-9 polyunsaturated fatty acids (PUFAs) to 10-hydroxy fatty acids. However, gene encoding enzyme involved in this conversion has not been identified to date. We purified a putative fatty acid double-bond hydratase from S. nitritireducens by ultrafiltration and HiPrep DEAE FF and Resource Q ion exchange chromatographies. Peptide sequences of the purified enzyme were obtained by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) analysis. Sequence of the partial gene encoding this putative fatty acid double-bond hydratase was determined by degenerate polymerase chain reaction (PCR) based on the peptide sequences. The remaining gene sequence was identified by rapid amplification of cDNA ends using cDNA of S. nitritireducens as a template, and the full-length gene was cloned subsequently. The expressed enzyme was identified as an oleate hydratase by determining its kinetic parameters toward unsaturated fatty acids. S. nitritireducens oleate hydratase showed higher activity toward PUFAs compared with other available oleate hydratases. This suggested that the enzyme could be used effectively to convert plant oils to 10-hydroxy fatty acids because these oils contained unsaturated fatty acids such as oleic acid (OA) and linoleic acid (LA) and PUFAs such as α-linolenic acid and/or γ-linolenic acid. The enzyme converted soybean oil and perilla seed oil hydrolyzates containing 10 mM total unsaturated fatty acids, including OA, LA, and ALA, to 8.87 and 8.70 mM total 10-hydroxy fatty acids, respectively, in 240 min. To our knowledge, this is the first study on the biotechnological conversion of PUFA-containing oils to hydroxy fatty acids. Biotechnol. Bioeng. 2017;114: 74-82. © 2016 Wiley Periodicals, Inc.

The first and second preferred substrates of recombinant Escherichia coli cells expressing 10R-dioxygenase (PpoC) from Aspergillus nidulans and the purified enzyme were linoleic acid and α-linolenic acid, respectively. PpoC in cells showed higher thermal and reaction stabilities compared to purified PpoC. Thus, 10R-hydroxy unsaturated fatty acids were produced from linoleic acid, α-linolenic acid, and hempseed oil hydrolyzate containing linoleic acid and α-linolenic acid as substrates by whole recombinant cells expressing PpoC. The optimal reaction conditions for the production of 10R-hydroxy-8E,12Z-octadecadienoic acid (10R-HODE) were pH 8.0, 30 °C, 250 rpm, 5 % (v/v) dimethyl sulfoxide, 5 g l(-1) linoleic acid, and 60 g l(-1) cells in 100-ml baffled flask. Under these conditions, whole recombinant cells expressing PpoC produced 2.7 g l(-1) 10R-HODE from 5 g l(-1) linoleic acid for 40 min, with a conversion yield of 54 % (w/w) and a productivity of 4.0 g l(-1) h(-1); produced 2.2 g l(-1) 10R-hydroxy-8E,12Z,15Z-octadecatrienoic acid (10R-HOTrE) from 3 g l(-1) α-linolenic acid for 30 min, with a conversion yield of 72 % (w/w) and a productivity of 4.3 g l(-1) h(-1); and produced 1.8 g l(-1) 10R-HODE and 0.5 g l(-1) 10R-HOTrE from 5 g l(-1) hempseed oil hydrolyzate containing 2.5 g l(-1) linoleic acid and 1.0 g l(-1) α-linolenic acid for 30 min, with a conversion yield of 74 and 51 % (w/w), respectively, and a productivity of 3.6 and 1.0 g l(-1) h(-1), respectively. To the best of our knowledge, this is the first report on the biotechnological production of 10R-hydroxy unsaturated fatty acids.

To identify novel fatty acid diol synthases, putative candidate sequences from Penicillium species were analyzed, and hydroxy fatty acid production by crude Penicillium enzyme extracts was assessed. Penicillium chrysogenum was found to produce an unknown dihydroxy fatty acid, a candidate gene implicated in this production was cloned and expressed, and the expressed enzyme was purified. The product obtained by the reaction of the purified enzyme with linoleic acid was identified as 8R,11S-dihydroxy-9,12(Z,Z)-octadecadienoic acid (8R,11S-DiHODE). The catalytic efficiency of this enzyme toward linoleic acid was the highest among the unsaturated fatty acids tested, indicating that this enzyme was a novel 8R,11S-linoleate diol synthase (8R,11S-LDS). A sexual stage in the life cycle of P. chrysogenum has recently been discovered, and 8R,11S-DiHODE produced by 8R,11S-LDS may constitute a precocious sexual inducer factor, responsible for regulating the sexual and asexual cycles of this fungus.

Platycodin D has diverse pharmacological activities. An efficient and economical mechanism for obtaining platycosides (platycodin D in particular) would be very useful. Balloon flower leaf extract (BFLE) was obtained by recycling leaves discarded from Platycodi radix production, as they have a high platycoside E content. A recombinant &beta, glycosidase from Caldicellulosiruptor owensensis was characterized and applied to BFLE for platycoside bioconversion. The enzyme specifically hydrolyzed the glucose residue at the C-3 position in platycosides and was suitable for platycodin D production. Under optimized reaction conditions, &beta, glycosidase from C. owensensis completely converted platycoside E from BFLE into platycodin D with the highest concentration and productivity reported so far. These results greatly improve the production process for deglycosylated platycosides.

Diol synthase-derived metabolites are involved in the sexual and asexual life cycles of fungi. A putative diol synthase from Penicillium oxalicum was found to convert palmitoleic acid (16:1n-7), oleic acid (18:1n-9), linoleic acid (18:2n-6), and α-linolenic acid (18:3n-3) to 6S,8R-dihydroxy-9(Z)-hexadecenoic acid, 6R,8R-dihydroxy-9(Z)-octadecenoic acid, 6R,8R-dihydroxy-9,12(Z,Z)-octadecadienoic acid, and 6S,8R-dihydroxy-9,12,15(Z,Z,Z)-octadecatrienoic acid, respectively, which were identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and nuclear magnetic resonance (NMR) spectroscopy analyses. The specific activity and catalytic efficiency of P. oxalicum 6,8-diol synthase were the highest for 18:2n-6, indicating that the enzyme is a 6R,8R-linoleate diol synthase (6R,8R-LDS) with new regiospecificity. This is the first report of a 6R,8R-LDS. LDS is a fusion protein consisting of a dioxygenase domain at the N-terminus and a cytochrome P450/hydroperoxide isomerase (P450/HPI) domain at the C-terminus. The putative active-site residues in the C-terminal domain of P. oxalicum 6R,8R-LDS were proposed based on a substrate-docking homology model. The results of the site-directed mutagenesis within C-terminal P450 domain suggested that Asn886, Arg707, and Arg934, are catalytic importance and belong to the catalytic groove. Phe794 and Gln889 were found to be involved in the regiospecific rearrangement of hydroperoxide, while the F794E and Q889A variants of P. oxalicum 6,8-LDS acted as 7,8- and 8,11-LDSs, respectively. All these mutations critically affected the HPI activity of P. oxalicum 6R,8R-LDS.

A putative diol synthase from the fungus Glomerella cingulate was cloned and expressed in Escherichia coli. The putative diol synthase from G. cingulate was purified by His-Trap affinity chromatography with a specific activity of 0.87 U mg(-1), an eightfold purification, and a yield of 28%. One unit of activity was defined as the amount of enzyme required to produce 1 μmol of 7,8-dihydroxy-9,12(Z,Z)-octadecadienoic acid (7,8-DiHODE) per min. The purified enzyme was estimated as a 127-kDa tetramer with a molecular mass of 510 kDa by gel filtration chromatography. The enzyme converted linoleic acid to a product, identified as 7S,8S-DiHODE by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) and nuclear magnetic resonance (NMR) spectroscopy. The specific activity and catalytic efficiency (k cat/K m) of 7,8-diol synthase from G. cingulate for the conversion of fatty acid to dihydroxy fatty acid followed the order linoleic acid > α-linolenic acid > oleic acid > palmitoleic acid, indicating that the enzyme is a 7,8-linoleate diol synthase (7,8-LDS). The activity of the enzyme for the conversion of 7,8-DiHODE from linoleic acid was maximal at pH 6.5, 40 °C, and 2.5% (v/v) dimethyl sulfoxide (DMSO). Under these conditions, 7,8-LDS from G. cingulate converted 1.0 mM linoleic acid to 0.62 mM 7,8-DiHODE for 30 min, with a conversion yield of 62% (mol/mol), via 8-hydroperoxy-9,12(Z,Z)-octadecadienoic acid (8-HPODE) as an intermediate. The accumulation of 8-HPODE was due to a higher 8-dioxygenase activity in the N-terminal domain than hydroperoxide isomerase activity in the C-terminal domain.

Ginsenoside compound K has been used as a key nutritional and cosmetic component because of its anti-fatigue and skin anti-aging effects. β-Glycosidase from Sulfolobus solfataricus (SS-BGL) is known as the most efficient enzyme for compound K production. The hydrolytic pathway from ginsenoside Rb1 to compound K via Rd and F2 is the most important because Rb1 is the most abundant component in ginseng extract. However, the enzymatic conversion of ginsenoside Rd to F2 is a limiting step in the hydrolytic pathway because of the relatively low activity for Rd. A V209 residue obtained from error-prone PCR was related to Rd-hydrolyzing activity, and a docking pose showing an interaction with Val209 was selected from numerous docking poses. W361F was obtained by rational design using the docking pose that exhibited 4.2-fold higher activity, 3.7-fold higher catalytic efficiency, and 3.1-fold lower binding energy for Rd than the wild-type enzyme, indicating that W361F compensated for the limiting step. W361F completely converted Rb1 to compound K with a productivity of 843 mg l−1 h−1 in 80 min, and showed also 7.4-fold higher activity for the flavanone, hesperidin, than the wild-type enzyme. Therefore, the W361F variant SS-BGL can be useful for hydrolysis of other glycosides as well as compound K production from Rb1, and semi-rational design is a useful tool for enhancing hydrolytic activity of β-glycosidase. Electronic supplementary material The online version of this article (doi:10.1186/s13568-017-0487-x) contains supplementary material, which is available to authorized users.

To characterize l-rhamnose isomerase (l-RI) from the thermophilic bacterium Clostridium stercorarium and apply it to produce d-allose from d-allulose. A recombinant l-RI from C. stercorarium exhibited the highest specific activity and catalytic efficiency (k cat/K m) for l-rhamnose among the reported l-RIs. The l-RI was applied to the high-level production of d-allose from d-allulose. The isomerization activity for d-allulose was maximal at pH 7, 75 °C, and 1 mM Mn2+ over 10 min reaction time. The half-lives of the l-RI at 65, 70, 75, and 80 °C were 22.8, 9.5, 1.9, and 0.2 h, respectively. To ensure full stability during 2.5 h incubation, the optimal temperature was set at 70 °C. Under the optimized conditions of pH 7, 70 °C, 1 mM Mn2+, 27 U l-RI l−1, and 600 g d-allulose l−1, l-RI from C. stercorarium produced 199 g d-allose l−1 without by-products over 2.5 h, with a conversion yield of 33% and a productivity of 79.6 g l−1 h−1. To the best of our knowledge, this is the highest concentration and productivity of d-allose reported thus far.

Oleate hydratases (OhyAs) catalyze the conversion of unsaturated fatty acids to 10-hydroxy fatty acids, which are used as precursors of important industrial compounds, including lactones and ω-hydroxycarboxylic and α,ω-dicarboxylic acids. The genes encoding OhyA and a putative fatty acid hydratase in Stenotrophomonas maltophilia were identified by genomic analysis. The putative fatty acid hydratase was purified and identified as an oleate hydratase (OhyA2) based on its substrate specificity. The activity of OhyA2 as a holoenzyme was not affected by adding cofactors, whereas the activity of the original oleate hydratase (OhyA1) showed an increase. Thus, all characterized OhyAs were categorized as either OhyA1 or OhyA2 based on the activities of holoenzymes upon adding cofactors, which were determined by the type of the fourth conserved amino acid of flavin adenine dinucleotide (FAD)-binding motif. The hydration activities of S. maltophilia OhyA2 toward unsaturated fatty acids, including oleic acid, palmitoleic acid, linoleic acid, α-linolenic acid, and γ-linolenic acid, were greater than those of OhyA1. Moreover, the specific activity of S. maltophilia OhyA2 toward unsaturated fatty acids, with the exception of γ-linolenic acid, was the highest among all reported OhyAs. IMPORTANCE All characterized OhyAs were categorized as OhyA1s or OhyA2s based on the different properties of the reported and newly identified holo-OhyAs in S. maltophilia upon the addition of cofactors. OhyA2s showed higher activities toward polyunsaturated fatty acids (PUFAs), including linoleic acid, α-linolenic acid, and γ-linolenic acid, than those of OhyA1s. This suggests that OhyA2s can be used more effectively to convert plant oils to 10-hydroxy fatty acids because plant oils contain not only oleic acid but also PUFAs. The hydration activity of the newly identified OhyA2 from S. maltophilia toward oleic acid was the highest among the activity levels reported so far. Therefore, this enzyme is an efficient biocatalyst for the conversion of plant oils to 10-hydroxy fatty acids, which can be further converted to important industrial materials.

The reaction conditions for the production of 7S,8S-dihydroxy-9,12(Z,Z)-octadecadienoic acid from linoleic acid by recombinant Escherichia coli expressing 7,8-linoleate diol synthase from Glomerella cingulata were optimized using response surface methodology. The optimal reaction conditions were pH 7.0, 18.6 °C, 10.8% (v/v) dimethyl sulfoxide, 44.9 g/L cells, and 14.3 g/L linoleic acid, with agitation at 256 rpm. Under these conditions, recombinant cells produced 7,8-dihydroxy unsaturated fatty acids in the range of 7.0–9.8 g/L from 14.3 g/L linoleic acid, 14.3 g/L oleic acid, and plant oil hydrolysates such as waste oil and olive oil containing 14.3 g/L linoleic acid or oleic acid. To the best of the authors’ knowledge, this is the first report on the biotechnological production of 7,8-dihydroxy unsaturated fatty acids.

Hydroxy unsaturated fatty acids can be used as antimicrobial surfactants. 8,11-Linoleate diol synthase (8,11-LDS) catalyzes the conversion of unsaturated fatty acid to 8-hydroperoxy unsaturated fatty acid, and it is subsequently isomerized to 8,11-dihydroxy unsaturated fatty acid by the enzyme. The optimal reaction conditions of recombinant Escherichia coli expressing Penicillium chrysogenum 8,11-LDS for the production of 8,11-dihydroxy-9,12(Z,Z)-octadecadienoic acid (8,11-DiHODE), 8,11-dihydroxy-9,12,15(Z,Z,Z)-octadecatrienoic acid (8,11-DiHOTrE), 8-hydroxy-9(Z)-hexadecenoic acid (8-HHME), and 8-hydroxy-9(Z)-octadecenoic acid (8-HOME) were pH 7.0, 25°C, 10 g/L linoleic acid, and 20 g/L cells; pH 6.0, 25°C, 6 g/L α-linolenic acid, and 60 g/L cells; pH 7.0, 25°C, 8 g/L palmitoleic acid, and 25 g/L cells; and pH 8.5, 30°C, 6 g/L oleic acid, and 25 g/L cells, respectively. Under these optimized conditions, the recombinant cells produced 6.0 g/L 8,11-DiHODE for 60 min, with a conversion of 60% (w/w) and a productivity of 6.0 g/L/h; 4.3 g/L 8,11-DiHOTrE for 60 min, with a conversion of 72% (w/w) and a productivity of 4.3 g/L/h; 4.3 g/L 8-HHME acid for 60 min, with a conversion of 54% (w/w) and a productivity of 4.3 g/L/h; and 0.9 g/L 8-HOME for 30 min, with a conversion of 15% (w/w) and a productivity of 1.8 g/L/h. To best of our knowledge, this is the first report on the biotechnological production of 8,11-DiHODE, 8,11-DiHOTrE, 8-HHME, and 8-HOME. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:390-396, 2017.