Search

Inhibition of membrane‐bound pyrophosphatase (mPPase) with small molecules offer a new approach in the fight against pathogenic protozoan parasites. mPPases are absent in humans, but essential for many protists as they couple pyrophosphate hydrolysis to the active transport of protons or sodium ions across acidocalcisomal membranes. So far, only few nonphosphorus inhibitors have been reported. Here, we explore the chemical space around previous hits using a combination of screening and synthetic medicinal chemistry, identifying compounds with low micromolar inhibitory activities in the Thermotoga maritima mPPase test system. We furthermore provide early structure‐activity relationships around a new scaffold having a pyrazolo[1,5‐a]pyrimidine core. The most promising pyrazolo[1,5‐a]pyrimidine congener was further investigated and found to inhibit Plasmodium falciparum mPPase in membranes as well as the growth of P. falciparum in an ex vivo survival assay., Chemical space exploration: Novel low micromolar membrane‐bound pyrophosphatase (mPPase) inhibitors based on an exploratory screening against Thermotoga maritima mPPase followed by early SARs around a pyrazolo[1,5‐a]pyrimidine scaffold. Compound 17 a retained activity against Plasmodium falciparum mPPase in membranes, and inhibited parasite growth ex vivo.

Identifying stabilising variants of membrane protein targets is often required for structure determination. Our new computational pipeline, the Integral Membrane Protein Stability Selector (IMPROvER) provides a rational approach to variant selection by employing three independent approaches: deep-sequence, model-based and data-driven. In silico tests using known stability data, and in vitro tests using three membrane protein targets with 7, 11 and 16 transmembrane helices provided measures of success. In vitro, individual approaches alone all identified stabilising variants at a rate better than expected by random selection. Low numbers of overlapping predictions between approaches meant a greater success rate was achieved (fourfold better than random) when approaches were combined and selections restricted to the highest ranked sites. The mix of information IMPROvER uses can be extracted for any helical membrane protein. We have developed the first general-purpose tool for selecting stabilising variants of $$\upalpha$$ α -helical membrane proteins, increasing efficiency and reducing workload. IMPROvER can be accessed at http://improver.ddns.net/IMPROvER/.

Membrane-bound pyrophosphatases (mPPases) regulate energy homeostasis in pathogenic protozoan parasites and lack human homologues, which makes them promising targets in e.g. malaria. Yet only few nonphosphorus inhibitors have been reported so far. Here, we explore an isoxazole fragment hit, leading to the discovery of small mPPase inhibitors with 6-10 mu M IC50 values in the Thermotoga maritima test system. Promisingly, the compounds retained activity against Plasmodium falciparum mPPase in membranes and inhibited parasite growth.

Glutamate transporters play important roles in bacteria, archaea and eukaryotes. Their function in the mammalian central nervous system is essential for preventing excitotoxicity, and their dysregulation is implicated in many diseases, such as epilepsy and Alzheimer's. Elucidating their transport mechanism would further the understanding of these transporters and promote drug design as they provide compelling targets for understanding the pathophysiology of diseases and may have a direct role in the treatment of conditions involving glutamate excitotoxicity. This review outlines the insights into the transport cycle, uncoupled chloride conductance and modulation, as well as identifying areas that require further investigation.

Membrane-embedded pyrophosphatase (M-PPase) hydrolyzes pyrophosphate to drive ion (H+ and/or Na+) translocation. We determined crystal structures and functions of Vigna radiata M-PPase (VrH+-PPase), the VrH+-PPase-2Pi complex and mutants at hydrophobic gate (residue L555) and exit channel (residues T228 and E225). Ion pore diameters along the translocation pathway of three VrH+-PPases complexes (Pi-, 2Pi- and imidodiphosphate-bound states) present a unique wave-like profile, with different pore diameters at the hydrophobic gate and exit channel, indicating that the ligands induced pore size alterations. The 2Pi-bound state with the largest pore diameter might mimic the hydrophobic gate open. In mutant structures, ordered waters detected at the hydrophobic gate among VrH+-PPase imply the possibility of solvation, and numerous waters at the exit channel might signify an open channel. A salt-bridge, E225-R562 is at the way out of the exit channel of VrH+-PPase; E225A mutant makes the interaction eliminated and reveals a decreased pumping ability. E225-R562 might act as a latch to regulate proton release. A water wire from the ion gate (R-D-K-E) through the hydrophobic gate and into the exit channel may reflect the path of proton transfer.

In the accompanying paper, we described evolving a lipase to the point where variants were soluble, stable and capable of degrading C8 TAG and C8 esters. These variants were tested for their ability to survive in an environment that might be encountered in a washing machine. Unfortunately, they were inactivated both by treatment with a protease used in laundry detergents and by very low concentrations of sodium dodecyl sulfate (SDS). In addition, all the variants had very low levels of activity with triglycerides with long aliphatic chains and with naturally occurring oils, like olive oil. Directed evolution was used to select variants with enhanced properties. In the first 10 rounds of evolution, the primary screen was selected for variants capable of hydrolyzing olive oil whereas the secondary screen was selected for enhanced tolerance towards a protease and SDS. In the final six rounds of evolution, the primary and secondary screens identified variants that retained activity after treatment with SDS. Sixteen cycles of evolution gave variants with greatly enhanced lipolytic activity on substrates that had both long (C16 and C18) as well as short (C3 and C8) chains. We found variants that were stable for more than 3 hours in protease concentrations that rapidly degrade the wild-type enzyme. Enhanced tolerance towards SDS was found in variants that could break down naturally occurring lipid and resist protease attack. The amino acid changes that gave enhanced properties were concentrated in the cap domain responsible for substrate binding.

Acta crystallographica / Section D 77(2), 194-204 (2021). doi:10.1107/S2059798320015454, The emergence of X-ray free-electron lasers has led to the development of serial macromolecular crystallography techniques, making it possible to study smaller and more challenging crystal systems and to perform time-resolved studies on fast time scales. For most of these studies the desired crystal size is limited to a few micrometres, and the generation of large amounts of nanocrystals or microcrystals of defined size has become a bottleneck for the wider implementation of these techniques. Despite this, methods to reliably generate microcrystals and fine-tune their size have been poorly explored. Working with three different enzymes, L-aspartate $��$-decarboxylase, copper nitrite reductase and copper amine oxidase, the precipitating properties of ammonium sulfate were exploited to quickly transition from known vapour-diffusion conditions to reproducible, large-scale batch crystallization, circumventing the tedious determination of phase diagrams. Furthermore, the specific ammonium sulfate concentration was used to fine-tune the crystal size and size distribution. Ammonium sulfate is a common precipitant in protein crystallography, making these findings applicable to many crystallization systems to facilitate the production of large amounts of microcrystals for serial macromolecular crystallography experiments., Published by Wiley, Bognor Regis

Characterizing the mycobacterial transporters involved in the uptake and/or catabolism of host-derived nutrients required by mycobacteria may identify novel drug targets against tuberculosis. Here, we identify and characterize a member of the amino acid-polyamine-organocation superfamily, a potential gamma-aminobutyric acid (GABA) transport protein, GabP, from Mycobacterium smegmatis. The protein was expressed to a level allowing its purification to homogeneity, and size exclusion chromatography coupled with multiangle laser light scattering (SEC-MALLS) analysis of the purified protein showed that it was dimeric. We showed that GabP transported gamma-aminobutyric acid both in vitro and when overexpressed in E. coli. Additionally, transport was greatly reduced in the presence of beta-alanine, suggesting it could be either a substrate or inhibitor of GabP. Using GabP reconstituted into proteoliposomes, we demonstrated that gamma-aminobutyric acid uptake is driven by the sodium gradient and is stimulated by membrane potential. Molecular docking showed that gamma-aminobutyric acid binds MsGabP, another Mycobacterium smegmatis putative GabP, and the Mycobacterium tuberculosis homologue in the same manner. This study represents the first expression, purification, and characterization of an active gamma-aminobutyric acid transport protein from mycobacteria. IMPORTANCE The spread of multidrug-resistant tuberculosis increases its global health impact in humans. As there is transmission both to and from animals, the spread of the disease also increases its effects in a broad range of animal species. Identifying new mycobacterial transporters will enhance our understanding of mycobacterial physiology and, furthermore, provides new drug targets. Our target protein is the gene product of msmeg_6196, annotated as GABA permease, from Mycobacterium smegmatis strain MC2 155. Our current study demonstrates it is a sodium-dependent GABA transporter that may also transport beta-alanine. As GABA may well be an essential nutrient for mycobacterial metabolism inside the host, this could be an attractive target for the development of new drugs against tuberculosis.

Membrane proteins have a range of crucial biological functions and are the target of about 60% of all prescribed drugs. For most studies, they need to be extracted out of the lipid-bilayer, e.g. by detergent solubilisation, leading to the loss of native lipids, which may disturb important protein-lipid/bilayer interactions and thus functional and structural integrity. Relipidation of membrane proteins has proven extremely successful for studying challenging targets, but the identification of suitable lipids can be expensive and laborious. Therefore, we developed a screen to aid the high-throughput identification of beneficial lipids. The screen covers a large lipid space and was designed to be suitable for a range of stability assessment methods. Here, we demonstrate its use as a tool for identifying stabilising lipids for three membrane proteins: a bacterial pyrophosphatase (Tm-PPase), a fungal purine transporter (UapA) and a human GPCR (A2AR). A2AR is stabilised by cholesteryl hemisuccinate, a lipid well known to stabilise GPCRs, validating the approach. Additionally, our screen also identified a range of new lipids which stabilised our test proteins, providing a starting point for further investigation and demonstrating its value as a novel tool for membrane protein research. The pre-dispensed screen will be made commercially available to the scientific community in future and has a number of potential applications in the field.

The receptor tyrosine kinase RET is essential in a variety of cellular processes. RET gain-of-function is strongly associated with several cancers, notably multiple endocrine neoplasia type 2A (MEN 2A), while RET loss-of-function causes Hirschsprung's disease and Parkinson's disease. To investigate the activation mechanism of RET as well as to enable drug development, over-expressed recombinant protein is needed for in vitro functional and structural studies. By comparing insect and mammalian cells expression of the RET extracellular domain (RETECD), we showed that the expression yields of RETECD using both systems were comparable, but mammalian cells produced monomeric functional RETECD, whereas RETECD expressed in insect cells was non-functional and multimeric. This was most likely due to incorrect disulfide formation. By fusing an Fc tag to the C-terminus of RETECD, we were able to produce, in HEK293T cells, dimeric oncogenic RETECD (C634R) for the first time. The protein remained dimeric even after cleavage of the tag via the cysteine disulfide, as in full-length RET in the context of MEN 2A and related pathologies. Our work thus provides valuable tools for functional and structural studies of the RET signaling system and its oncogenic activation mechanisms. (C) 2020 Published by Elsevier B.V.

The current problem of increasing antibiotic resistance and the resurgence of numerous infections indicate the need for novel vaccination strategies more than ever. In vaccine development, the search for and the selection of adequate vaccine antigens is the first important step. In recent years, bacterial outer membrane proteins have become of major interest, as they are the main proteins interacting with the extracellular environment. Trimeric autotransporter adhesins (TAAs) are important virulence factors in many Gram-negative bacteria, are localised on the bacterial surface, and mediate the first adherence to host cells in the course of infection. One example is theNeisseriaadhesin A (NadA), which is currently used as a subunit in a licensed vaccine againstNeisseria meningitidis. Other TAAs that seem promising vaccine candidates are theAcinetobactertrimeric autotransporter (Ata), theHaemophilus influenzaeadhesin (Hia), and TAAs of the genusBartonella. Here, we review the suitability of various TAAs as vaccine candidates.

A major obstacle to studying membrane proteins by biophysical techniques is the difficulty in producing sufficient amounts of materials for functional and structural studies. To overexpress the target membrane protein heterologously, especially an eukaryotic protein, a key step is to find the optimal host expression system and perform subsequent expression optimization. In this chapter, we describe protocols for screening membrane protein production using bacterial and insect cells, solubilization screening, large-scale production, and commonly used affinity chromatography purification methods. We discuss general optimization conditions, such as promoters and tags, and describe current techniques that can be used in any laboratory without specialized expensive equipment. Especially for insect cells, GFP fusions are particularly useful for localization and in-gel fluorescence detection of the proteins on SDS-PAGE. We give detailed protocols that can be used to screen the best expression and purification conditions for membrane protein study.

Adhesion is the initial step in the infection process of gram-negative bacteria. It is usually followed by the formation of biofilms that serve as a hub for further spread of the infection. Type V secretion systems engage in this process by binding to components of the extracellular matrix, which is the first step in the infection process. At the same time they provide protection from the immune system by either binding components of the innate immune system or by establishing a physical layer against aggressors. Trimeric autotransporter adhesins (TAAs) are of particular interest in this family of proteins as they possess a unique structural composition which arises from constraints during translocation. The sequence of individual domains can vary dramatically while the overall structure can be very similar to one another. This patchwork approach allows researchers to draw conclusions of the underlying function of a specific domain in a structure-based approach which underscores the importance of solving structures of yet uncharacterized TAAs and their individual domains to estimate the full extent of functions of the protein a priori. Here, we describe recent advances in understanding the translocation process of TAAs and give an overview of structural motifs that are unique to this class of proteins. The role of BpaC in the infection process of Burkholderia pseudomallei is highlighted as an exceptional example of a TAA being at the centre of infection initiation.

Membrane integral pyrophosphatases (mPPases) are responsible for the hydrolysis of pyrophosphate. This enzymatic mechanism is coupled to the pumping of H+ or Na+ across membranes in a process that can be K+ dependent or independent. Understanding the movements and dynamics throughout the mPPase catalytic cycle is important, as this knowledge is essential for improving or impeding protein function. mPPases have been shown to play a crucial role in plant maturation and abiotic stress tolerance, and so have the potential to be engineered to improve plant survival, with implications for global food security. mPPases are also selectively toxic drug targets, which could be pharmacologically modulated to reduce the virulence of common human pathogens. The last few years have seen the publication of many new insights into the function and structure of mPPases. In particular, there is a new body of evidence that the catalytic cycle is more complex than originally proposed. There are structural and functional data supporting a mechanism involving half-of-the-sites reactivity, inter-subunit communication, and exit channel motions. A more advanced and in-depth understanding of mPPases has begun to be uncovered, leaving the field of research with multiple interesting avenues for further exploration and investigation.

Graphical abstract, Highlights • UspA1299–452 is a left-handed coiled-coil structure that follows TAA rules. • Structure of UspA1299–452 contains part of the long neck domain and of the stalk. • UspA1-C3d binding does not saturate at C3d physiological concentrations. • The binding constant as measured by thermophoresis is at least 140 μM. • Full-length proteins or other factors are important for UspA1-C3d interactions., The gram-negative bacterium Moraxella catarrhalis infects humans exclusively, causing various respiratory tract diseases, including acute otitis media in children, septicaemia or meningitis in adults, and pneumonia in the elderly. To do so, M. catarrhalis expresses virulence factors facilitating its entry and survival in the host. Among them are the ubiquitous surface proteins (Usps): A1, A2, and A2H, which all belong to the trimeric autotransporter adhesin family. They bind extracellular matrix molecules and inhibit the classical and alternative pathways of the complement cascade by recruiting complement regulators C3d and C4b binding protein. Here, we report the 2.5 Å resolution X-ray structure of UspA1299–452, which previous work had suggested contained the canonical C3d binding site found in both UspA1 and UspA2. We show that this fragment of the passenger domain contains part of the long neck domain (residues 299–336) and a fragment of the stalk (residues 337–452). The coiled-coil stalk is left-handed, with 7 polar residues from each chain facing the core and coordinating chloride ions or water molecules. Despite the previous reports of tight binding in serum-based assays, we were not able to demonstrate binding between C3d and UspA1299–452 using ELISA or biolayer interferometry, and the two proteins run separately on size-exclusion chromatography. Microscale thermophoresis suggested that the dissociation constant was 140.5 ± 8.4 μM. We therefore suggest that full-length proteins or other additional factors are important in UspA1-C3d interactions. Other molecules on the bacterial surface or present in serum may enhance binding of those two molecules.

Membrane-bound pyrophosphatases are homodimeric integral membrane proteins that hydrolyze pyrophosphate into orthophosphates, coupled to the active transport of protons or sodium ions across membranes. They are important in the life cycle of bacteria, archaea, plants, and parasitic protists, but no homologous proteins exist in vertebrates, making them a promising drug target. Here, we report the first nonphosphorus allosteric inhibitor of the thermophilic bacterium Thermotoga maritima membrane-bound pyrophosphatase and its bound structure together with the substrate analog imidodiphosphate. The unit cell contains two protein homodimers, each binding a single inhibitor dimer near the exit channel, creating a hydrophobic clamp that inhibits the movement of beta-strand 1-2 during pumping, and thus prevents the hydrophobic gate from opening. This asymmetry of inhibitor binding with respect to each homodimer provides the first clear structural demonstration of asymmetry in the catalytic cycle of membrane-bound pyrophosphatases.

Membrane proteins represent one of the most important targets for pharmaceutical companies. Unfortunately, technical limitations have long been a major hindrance in our understanding of the function and structure of such proteins. Recent years have seen the refinement of classical approaches and the emergence of new technologies that have resulted in a significant step forward in the field of membrane protein research. This review summarizes some of the current techniques used for studying membrane proteins, with overall advantages and drawbacks for each method.

The discovery of the receptors for the protein GDF15 suggests that it regulates food uptake through the emergency pathway — a neuronal circuit that causes weight loss in response to cancer, tissue damage and stress. See Letter p.255 Growth and differentiation factor 15 (GDF15) acts on feeding centres in the brain to cause anorexia, leading to loss of both lean and fat mass and eventually cachexia. GDF15 levels rise in response to tissue stress and injury, and higher levels are associated with weight loss in numerous chronic human diseases, including cancer. Bernard Allan and colleagues now show that glial cell-derived neurotrophic factor (GDNF) receptor alpha-like (GFRAL) is a GDF15 receptor in the brainstem. The structure of GDF15 and its interaction with GFRAL together with biochemical experiments and analysis of Gfral knockout mice demonstrate that regulation of body weight by GFRAL is independent of previously characterized pathways. Unlike hormones from gut and adipose tissue that activate receptors mostly in the hypothalamus, GDF15 increases in response to tissue damage and activates GFRAL-expressing neurons in the brainstem. Gfral knockout mice overate under stressed conditions and were resistant to chemotherapy-induced anorexia and weight loss. These findings provide therapeutic opportunities for disorders with altered energy demands.

Membrane-bound pyrophosphatases are homodimeric integral membrane proteins that hydrolyse pyrophosphate into orthophosphates, coupled to the active transport of protons or sodium ions across membranes. They are important in the life cycle of bacteria, archaea, plants, and protist parasites, but no homologous proteins exist in vertebrates, making them a promising drug target. Here, we report the first non-phosphorous allosteric inhibitor (Ki of 1.8 ± 0.3 μM) of the thermophilic bacterium Thermotoga maritima membrane-bound pyrophosphatase and its bound structure at 3.7 Å resolution together with the substrate analogue imidodiphosphate. The unit cell contains two protein homodimers, each binding a single inhibitor dimer near the exit channel, creating a hydrophobic clamp that inhibits the movement of β-strand 1–2 during pumping, and thus preventing the hydrophobic gate from opening. This asymmetry of inhibitor binding with respect to each homodimer provide the first clear demonstration of asymmetry in the catalytic cycle of membrane-bound pyrophosphatases.

Protein engineering is one of the foundations of biotechnology, used to increase protein stability, re-assign the catalytic properties of enzymes or increase the interaction affinity between antibody and target. To date, strategies for protein engineering have focussed on systematic, random or computational methods for introducing new mutations. Here, we introduce the statistical approach of fractional factorial design as a convenient and powerful tool for the design and analysis of protein mutations, allowing sampling of a large mutational space whilst minimising the tests to be done. Our test case is the integral membrane protein, Acridine resistance subunit B (AcrB), part of the AcrAB-TolC multi-protein complex, a multi-drug efflux pump of Gram-negative bacteria. E. coli AcrB is naturally histidine-rich, meaning that it is a common contaminant in the purification of recombinantly expressed, histidine-tagged membrane proteins. Coupled with the ability of AcrB to crystallise from picogram quantities causing false positives in 2-D and 3-D crystallisation screening, AcrB contamination represents a significant hindrance to the determination of new membrane protein structures. Here, we demonstrate the use of fractional factorial design for protein engineering, identifying the most important residues involved in the interaction between AcrB and nickel resin. We demonstrate that a combination of spatially close, but sequentially distant histidine residues are important for nickel binding, which were different from those predicted a priori. Fractional factorial methodology has the ability to decrease the time and material costs associated with protein engineering whilst expanding the depth of mutational space explored; a revolutionary concept.Significance statementProtein engineering is important for the production of enzymes for bio-manufacturing, stabilised protein for research and production of therapeutic antibodies against human diseases. Here, we introduce a statistical method that can reduce the time and cost required to perform protein engineering. We validate our approach experimentally using the multi-drug efflux pump AcrB, a target for understanding drug-resistance in pathogenic bacteria, but also a persistent contaminant in the purification of membrane proteins from E. coli. This provides a general method for increasing the efficiency of protein engineering.

Membrane-bound pyrophosphatases (mPPases) are homodimeric integral membrane proteins that hydrolyse pyrophosphate into orthophosphates coupled to the active transport of protons or sodium ions across membranes. They occur in bacteria, archaea, plants, and protist parasites. As they are essential in protist parasites and there are no homologous proteins in animals and humans, these enzymes represent an excellent drug target for treating protistal diseases. Experimental screening to find drug candidates is an important step to discover new hit compounds. For that, a cheap, simple, and robust assay is needed. Here we report the application of the molybdenum blue reaction method for a medium throughput microplate activity assay of the hyperthermophilic bacterium Thermotoga maritima mPPase and the possible application of the assay to screen inhibitors of membrane-bound pyrophosphatases.

Eph/Ephrin signaling pathways are crucial in regulating a large variety of physiological processes during development, such as cell morphology, proliferation, migration and axonal guidance. EphrinA (efn-A) ligands, in particular, can be activated by EphA receptors at cellcell interfaces and have been proposed to cause reverse signaling via RET receptor tyrosine kinase. Such association has been reported to mediate spinal motor axon navigation, but conservation of the interactive signaling pathway and the molecular mechanism of the interaction are unclear. Here, we found Danio rerio efn-A5b bound to Mus musculus EphA4 with high affinity, revealing structurally and functionally conserved EphA/efn-A signaling. Interestingly, we observed no interaction between efn-A5b and RET from zebrafish, unlike earlier cell-based assays. Their lack of association indicates how complex efn-A signaling is and suggests that there may be other molecules involved in efn-A5-induced RET signaling.

Significance Autoimmune disease pathogenesis is driven by inflammation, induced partly by IgG autoantibody-containing immune complexes binding to Fc gamma receptors (FcγRs). These receptors are valid therapeutic targets in the treatment of autoimmunity. FcγRIIIa is one of a family of highly homologous receptors for IgG antibodies; previous attempts at therapeutic blockade have resulted in off-target effects involving cells that express the almost identical protein FcγRIIIb. Here we report the identification of functionally specific protein-based inhibitors (Affimer proteins) of FcγRIIIa and the structural/functional basis of their selectivity. As molecular research tools FcγRIIIa-specific Affimer proteins provide the ability to block IgG interaction with a single receptor. Our findings suggest that highly selective protein-based blocking agents that may have therapeutic applications can be readily produced.

The proteobacterial antimicrobial compound efflux (PACE) family of transport proteins was only recently described. PACE family transport proteins can confer resistance to a range of biocides used as disinfectants and antiseptics, and are encoded by many important Gram-negative human pathogens. However, we are only just beginning to appreciate the range of functions and the mechanism(s) of transport operating in these proteins. Genes encoding PACE family proteins are typically conserved in the core genomes of bacterial species rather than on recently acquired mobile genetic elements, suggesting that they confer important core functions in addition to biocide resistance. Three-dimensional structural information is not yet available for PACE family proteins. However, PACE proteins have several very highly conserved amino acid sequence motifs that are likely to be important for substrate transport. PACE proteins also display strong amino acid sequence conservation between their N- and C-terminal halves, suggesting that they evolved by duplication of an ancestral protein comprised of two transmembrane helices. In light of their drug resistance functions in Gram-negative pathogens, PACE proteins should be the subject of detailed future investigation.

Membrane-bound pyrophosphatases couple the hydrolysis of inorganic pyrophosphate to the pumping of ions (sodium or protons) across a membrane in order to generate an electrochemical gradient. This class of membrane protein is widely conserved across plants, fungi, archaea, and bacteria, but absent in multicellular animals, making them a viable target for drug design against protozoan parasites such as Plasmodium falciparum. An excellent understanding of many of the catalytic states throughout the enzymatic cycle has already been afforded by crystallography. However, the dynamics and kinetics of the catalytic cycle between these static snapshots remain to be elucidated. Here, we employ single-molecule Forster resonance energy transfer (FRET) measurements to determine the dynamic range and frequency of conformations available to the enzyme in a lipid bilayer during the catalytic cycle. First, we explore issues related to the introduction of fluorescent dyes by cysteine mutagenesis; we discuss the importance of residue selection for dye attachment, and the balance between mutating areas of the protein that will provide useful dynamics while not altering highly conserved residues that could disrupt protein function. To complement and guide the experiments, we used all-atom molecular dynamics simulations and computational methods to estimate FRET efficiency distributions for dye pairs at different sites in different protein conformational states. We present preliminary single-molecule FRET data that points to insights about the binding modes of different membrane-bound pyrophosphatase substrates and inhibitors.

Membrane-integral pyrophosphatases (mPPases) couple the hydrolysis of pyrophosphate (PPi) to the pumping of Na+, H+, or both these ions across a membrane. Recently solved structures of the Na+-pumping Thermotoga maritima mPPase (TmPPase) and H+-pumping Vigna radiata mPPase revealed the basis of ion selectivity between these enzymes and provided evidence for the mechanisms of substrate hydrolysis and ion-pumping. Our atomistic molecular dynamics (MD) simulations of TmPPase demonstrate that loop 5-6 is mobile in the absence of the substrate or substrate-analogue bound to the active site, explaining the lack of electron density for this loop in resting state structures. Furthermore, creating an apo model of TmPPase by removing ligands from the TmPPase: IDP: Na structure in MD simulations resulted in increased dynamics in loop 5-6, which results in this loop moving to uncover the active site, suggesting that interactions between loop 5-6 and the imidodiphosphate and its associated Mg2+ are important for holding a loop-closed conformation. We also provide further evidence for the transport-before-hydrolysis mechanism by showing that the non-hydrolyzable substrate analogue, methylene diphosphonate, induces low levels of proton pumping by VrPPase. (C) 2017 Author(s).

Nucleoside transporters (NTs) play critical biological roles in humans, and to understand the molecular mechanism of nucleoside transport requires high-resolution structural information. However, the main bottleneck for structural analysis of NTs is the production of pure, stable, and high quality native protein for crystallization trials. Here we report a novel membrane protein expression and purification strategy, including construction of a high-yield membrane protein expression vector, and a new and fast purification protocol for NTs. The advantages of this strategy are the improved time efficiency, leading to high quality, active, stable membrane proteins, and the efficient use of reagents and consumables. Our strategy might serve as a useful point of reference for investigating NTs and other membrane proteins by clarifying the technical points of vector construction and improvements of membrane protein expression and purification. © 2016 Hao, Thomsen, Postis, Lesiuk, Sharples, Wang, Bartlam and Goldman.

Despite the great importance of membrane proteins, structural and functional studies of these proteins present major challenges. A significant hurdle is the extraction of the functional protein from its natural lipid membrane. Traditionally achieved with detergents, purification procedures can be costly and time consuming. A critical flaw with detergent approaches is the removal of the protein from the native lipid environment required to maintain functionally stable protein. This protocol describes the preparation of styrene maleic acid (SMA) co-polymer to extract membrane proteins from prokaryotic and eukaryotic expression systems. Successful isolation of membrane proteins into SMA lipid particles (SMALPs) allows the proteins to remain with native lipid, surrounded by SMA. We detail procedures for obtaining 25 g of SMA (4 d); explain the preparation of protein-containing SMALPs using membranes isolated from Escherichia coli (2 d) and control protein-free SMALPS using E. coli polar lipid extract (1-2 h); investigate SMALP protein purity by SDS-PAGE analysis and estimate protein concentration (4 h); and detail biophysical methods such as circular dichroism (CD) spectroscopy and sedimentation velocity analytical ultracentrifugation (svAUC) to undertake initial structural studies to characterize SMALPs (∼2 d). Together, these methods provide a practical tool kit for those wanting to use SMALPs to study membrane proteins.

AMIGO-1 is the parent member of a novel family of three cell surface leucine-rich repeat (LRR) proteins. Its expression is induced by the binding of HMGB1 ( h igh- m obility g roup b ox 1 protein) to RAGE ( r eceptor for a dvanced g lycation e nd products) on neurons. Binding of HMGB1 to RAGE is known to have a direct effect on cellular growth regulation and mobility, and AMIGO-1 directly supports growth of neuronal processes and fasciculation of neurites. In addition, the second member of the AMIGO-family, AMIGO-2, has been implicated in adhesion of tumor cells in adenocarcinoma and survival of neurons. We have determined the crystal structure of AMIGO-1 at 2.0 A resolution, which reveals a typical cell surface LRR domain arrangement with N- and C-terminal capping domains with disulfide bridges, followed by a C2-type Ig domain. AMIGO-1 is a dimer, with the LRR regions forming the dimer interface, and sequence conservation analysis and static light-scattering measurements suggest that all three AMIGO family proteins form similar dimers. Based on the AMIGO-1 structure, we have also modeled AMIGO-2 and present small-angle X-ray scattering data on AMIGO-2 and AMIGO-3. Our mutagenesis studies show that AMIGO-1 dimerization is necessary for proper cell surface expression and thus probably for proper or stable folding in the endoplastic reticulum and for the function of the protein. Based on the data presented earlier, we also suggest that dimerization through the LRR–LRR interface is likely to be involved in cell–cell adhesion by AMIGO-1, while extensive glycosylation may have a role.

Cytochrome c oxidase (CcO) is the terminal enzyme of the respiratory chain. By reducing oxygen to water, it generates a proton gradient across the mitochondrial or bacterial membrane. Recently, two independent X-ray crystallographic studies ((Aoyama et al. Proc. Natl. Acad. Sci. USA 106 (2009) 2165–2169) and (Koepke et al. Biochim. Biophys. Acta 1787 (2009) 635–645)), suggested that a peroxide dianion might be bound to the active site of oxidized CcO. We have investigated this hypothesis by combining quantum chemical calculations with a re-refinement of the X-ray crystallographic data and optical spectroscopic measurements. Our data suggest that dianionic peroxide, superoxide, and dioxygen all form a similar superoxide species when inserted into a fully oxidized ferric/cupric binuclear site (BNC). We argue that stable peroxides are unlikely to be confined within the oxidized BNC since that would be expected to lead to bond splitting and formation of the catalytic P intermediate. Somewhat surprisingly, we find that binding of dioxygen to the oxidized binuclear site is weakly exergonic, and hence, the observed structure might have resulted from dioxygen itself or from superoxide generated from O2 by the X-ray beam. We show that the presence of O2 is consistent with the X-ray data. We also discuss how other structures, such as a mixture of the aqueous species (H2O + OH− and H2O) and chloride fit the experimental data.

The RadA intein from the hyperthermophilic archaebacterium Pyrococcus horikoshii was cloned, expressed and purified for subsequent structure determination. The protein crystallized rapidly in several conditions. The best crystals, which diffracted to 1.75 Å resolution, were harvested from drops consisting of 0.1 M HEPES pH 7.5, 3.0 M NaCl and were cryoprotected with Paratone-N before flash-cooling. The collected data were processed in the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 58.1, b = 67.4, c = 82.9 Å. Molecular replacement with Rosetta using energy- and density-guided structure optimization provided the initial solution, which is currently under refinement.

H atoms play a central role in enzymatic mechanisms, but H-atom positions cannot generally be determined by X-ray crystallography. Neutron crystallography, on the other hand, can be used to determine H-atom positions but it is experimentally very challenging. Yeast inorganic pyrophosphatase (PPase) is an essential enzyme that has been studied extensively by X-ray crystallography, yet the details of the catalytic mechanism remain incompletely understood. The temperature instability of PPase crystals has in the past prevented the collection of a neutron diffraction data set. This paper reports how the crystal growth has been optimized in temperature-controlled conditions. To stabilize the crystals during neutron data collection a Peltier cooling device that minimizes the temperature gradient along the capillary has been developed. This device allowed the collection of a full neutron diffraction data set.

Nucleotide-binding cystathionine β-synthase (CBS) domains serve as regulatory units in numerous proteins distributed in all kingdoms of life. However, the underlying regulatory mechanisms remain to be established. Recently, we described a subfamily of CBS domain-containing pyrophosphatases (PPases) within family II PPases. Here, we express a novel CBS-PPase from Clostridium perfringens (CPE2055) and show that the enzyme is inhibited by AMP and activated by a novel effector, diadenosine 5′,5-P1,P4-tetraphosphate (AP4A). The structures of the AMP and AP4A complexes of the regulatory region of C. perfringens PPase (cpCBS), comprising a pair of CBS domains interlinked by a DRTGG domain, were determined at 2.3 A resolution using X-ray crystallography. The structures obtained are the first structures of a DRTGG domain as part of a larger protein structure. The AMP complex contains two AMP molecules per cpCBS dimer, each bound to a single monomer, whereas in the activator-bound complex, one AP4A molecule bridges two monomers. In the nucleotide-bound structures, activator binding induces significant opening of the CBS domain interface, compared with the inhibitor complex. These results provide structural insight into the mechanism of CBS-PPase regulation by nucleotides.

Factor H (FH) regulates the alternative pathway of complement in plasma and mediates discrimination of cellular surfaces to alternative pathway activators and non-activators. The carboxyl-terminal domains 19 and 20 of FH are essential in target discrimination and are known to contain binding sites for the C3d part of C3b, heparin, and endothelial cells. Mutations in FH19-20 are frequently found in patients with atypical haemolytic uremic syndrome (aHUS). Most aHUS-associated and some other mutations have been shown to lead to impaired binding to C3d and C3b by the recombinant FH19-20 fragment. Most of these mutated residues, such as R1203, are located close to each other in domain 20 but some, such as Q1139, are located in domain 19. We generated mutant proteins Q1139A and R1203A of FH19-20 and showed that their binding to C3d and C3b was clearly impaired. To show that the effects on C3d/C3b binding are due to direct interactions rather than structural changes, we solved the X-ray crystal structures of the R1203A and Q1139A mutant proteins at 1.65 and 2.0A, respectively. Neither of the mutations caused any overall structural changes in FH19-20. It is thus evident that Q1139 in domain 19 and R1203 in domain 20 are directly involved in binding to the C3d part of C3b and therefore both the domains are involved in the interaction with C3d and C3b. This explains why several aHUS-associated FH mutations are found within domain 19 in addition to domain 20.

Peroxiredoxin II was cloned from mouse B cells into pCold 1 expression vector and produced as a His-tagged recombinant protein in Escherichia coli. A ring form was isolated by gel filtration. A crystal obtained by the sitting-drop vapour-diffusion method diffracted to 1.77 A resolution at 100 K. The crystal belonged to space group P2(1)2(1)2, with unit-cell parameters a = 117.4, b = 133.9, c = 139.1 A. The asymmetric unit is expected to contain six dimers of peroxiredoxin II, with a corresponding solvent content of 39.3%. Peaks in the native Patterson function together with pseudo-systematic absences suggested that the crystals suffered from severe translational pseudosymmetry.

The Hsp-organizing protein (HOP) binds to the C termini of the chaperones Hsp70 and Hsp90, thus bringing them together so that substrate proteins can be passed from Hsp70 to Hsp90. Because Hsp90 is essential for the correct folding and maturation of many oncogenic proteins, it has become a significant target for anti-cancer drug design. HOP binds to Hsp70 and Hsp90 via two independent tetratricopeptide (TPR) domains, TPR1 and TPR2A, respectively. We have analyzed ligand binding using Poisson-Boltzmann continuum electrostatic calculations, free energy perturbation, molecular dynamics simulations, and site-directed mutagenesis to delineate the contribution of different interactions to the affinity and specificity of the TPR-peptide interactions. We found that continuum electrostatic calculations could be used to guide protein design by removing unfavorable interactions to increase binding affinity, with an 80-fold increase in affinity for TPR2A. Contributions at buried charged residues, however, were better predicted by free energy perturbation calculations. We suggest using a combination of the two approaches for increasing the accuracy of results, with free energy perturbation calculations used only at selected buried residues of the ligand binding pocket. Finally we present the crystal structure of TPR2A in complex with its non-cognate Hsp70 ligand, which provides insight on the origins of specificity in TPR domain-peptide recognition.

We have solved the structures of mammalian mesencephalic astrocyte-derived neurotrophic factor (MANF) and conserved dopamine neurotrophic factor (CDNF). CDNF protects and repairs midbrain dopaminergic neurons in vivo; MANF supports their survival in culture and is also cytoprotective against endoplasmic reticulum (ER) stress. Neither protein structure resembles any known growth factor but the N-terminal domain is a saposin-like lipid-binding domain. MANF and CDNF may thus bind lipids or membranes. Consistent with this, there are two patches of conserved lysines and arginines. The natively unfolded MANF C-terminus contains a CKGC disulphide bridge, such as reductases and disulphide isomerases, consistent with a role in ER stress response. The structure thus explains why MANF and CDNF are bifunctional; neurotrophic activity may reside in the N-terminal domain and ER stress response in the C-terminal domain. Finally, we identified three changes, (MANF)I10-->K(CDNF), (MANF)E79-->M(CDNF) and (MANF)K88-->L(CDNF), that may account for the biological differences between the proteins.

Glial cell line-derived neurotrophic factor (GDNF), a neuronal survival factor, binds its co-receptor GDNF family receptor α1 (GFRα1) in a 2:2 ratio and signals through the receptor tyrosine kinase RET. We have solved the GDNF2·GFRα12 complex structure at 2.35 A resolution in the presence of a heparin mimic, sucrose octasulfate. The structure of our GDNF2·GFRα12 complex and the previously published artemin2·GFRα32 complex are unlike in three ways. First, we have experimentally identified residues that differ in the ligand-GFRα interface between the two structures, in particular ones that buttress the key conserved ArgGFRα-Gluligand-ArgGFRα interaction. Second, the flexible GDNF ligand “finger” loops fit differently into the GFRαs, which are rigid. Third, and we believe most importantly, the quaternary structure of the two tetramers is dissimilar, because the angle between the two GDNF monomers is different. This suggests that the RET-RET interaction differs in different ligand2-co-receptor2-RET2 heterohexamer complexes. Consistent with this, we showed that GDNF2·GFRα12 and artemin2·GFRα32 signal differently in a mitogen-activated protein kinase assay. Furthermore, we have shown by mutagenesis and enzyme-linked immunosorbent assays of RET phosphorylation that RET probably interacts with GFRα1 residues Arg-190, Lys-194, Arg-197, Gln-198, Lys-202, Arg-257, Arg-259, Glu-323, and Asp-324 upon both domains 2 and 3. Interestingly, in our structure, sucrose octasulfate also binds to the Arg190-Lys202 region in GFRα1 domain 2. This may explain how GDNF·GFRα1 can mediate cell adhesion and how heparin might inhibit GDNF signaling through RET.

The Yersinia adhesin A (YadA) is a collagen-binding trimeric autotransporter of Yersinia enterocolitica, an enteropathogen that causes a range of gastroenteric and systemic diseases, and YadA is essential for Y. enterocolitica virulence. Although previous studies suggest a specific binding site in collagen for YadA, we found that recombinant YadA binds to both major cyanogen bromide fragments of collagen type II and the collagen-like model peptide (Pro-Hyp-Gly)(10) [(POG)(10)]. To further characterise the YadA-collagen interaction, we investigated the binding of YadA to (POG)(10) and three other model peptides, (Pro-Pro-Gly)(10) which lacks the hydroxyl groups of (POG)(10), T3-785 which contains a stretch of the collagen type III sequence and Gly(-) which is similar to (POG)(10) but lacks the central glycine. All the peptides except Gly(-) adopt a collagen-like triple-helical conformation at room temperature. All three triple-helical peptides bound to YadA, with (POG)(10) being the tightest, whereas binding of Gly(-) was hardly detectable. The affinity of (POG)(10) for YadA was 0.28 microM by isothermal titration calorimetry and 0.17 microM by surface plasmon resonance (SPR), similar to that of collagen type I. Our results show that a collagen-like triple-helical conformation, strengthened by the presence of hydroxyproline residues, is both necessary and sufficient for YadA binding.

All UDP-glucuronosyltransferase enzymes (UGTs) share a common cofactor, UDP-glucuronic acid (UDP-GlcUA). The binding site for UDP-GlcUA is localized to the C-terminal domain of UGTs on the basis of amino acid sequence homology analysis and crystal structures of glycosyltransferases, including the C-terminal domain of human UGT2B7. We hypothesized that the (393)DQMDNAK(399) region of human UGT1A10 interacts with the glucuronic acid moiety of UDP-GlcUA. Using site-directed mutagenesis and enzymatic analysis, we demonstrated that the D393A mutation abolished the glucuronidation activity of UGT1A10 toward all substrates. The effects of the alanine mutation at Q(394),D(396), and K(399) on glucuronidation activities were substrate-dependent. Previously, we examined the importance of these residues in UGT2B7. Although D(393) (D(398) in UGT2B7) is similarly critical for UDP-GlcUA binding in both enzymes, the effects of Q(394) (Q(399) in UGT2B7) to Ala mutation on activity were significant but different between UGT1A10 and UGT2B7. A model of the UDP-GlcUA binding site suggests that the contribution of other residues to cosubstrate binding may explain these differences between UGT1A10 and UGT2B7. We thus postulate that D(393) is critical for the binding of glucuronic acid and that proximal residues, e.g., Q(394) (Q(399) in UGT2B7), play a subtle role in cosubstrate binding in UGT1A10 and UGT2B7. Hence, this study provides important new information needed for the identification and understanding of the binding sites of UGTs, a major step forward in elucidating their molecular mechanism.

Collagen IX, located on the surface of collagen fibrils, is crucial for cartilage integrity and stability. The N-terminal NC4 domain of the alpha1(IX) chain is probably important in this because it interacts with various macromolecules such as proteoglycans and cartilage oligomeric matrix protein. At least 17 distinct collagen polypeptides carry an NC4-like unit near their N terminus, but this report, describing the crystal structure of NC4 at 1.8-A resolution, represents the first atomic level structure for these domains. The structure is similar to previously characterized laminin-neurexin-sex hormone binding globulin (LNS) structures, dominated by an antiparallel beta-sheet sandwich. In addition, a zinc ion was found in a position similar to that of the metal binding site of other LNS domains. A partial backbone NMR assignment of NC4 was obtained and utilized in NMR titration studies to investigate the zinc binding in solution state and to quantitate the affinity of metal binding. The K(d) of 11.5 mM suggests a regulatory rather than a structural role for zinc in solution. NMR titration with a heparin tetrasaccharide revealed the presence of a secondary binding site for heparin on NC4, showing structural and functional conservation with thrombospondin-1, but a markedly reduced affinity for the ligand. Also the overall arrangement of the N and C termini of NC4 resembles most closely the N-terminal domain of thrombospondin-1, distinguishing the two from the majority of the published LNS structures.

UDP-glucuronosyltransferases (UGTs) play important roles in the metabolism, detoxification,and clearance of many different xenobiotics, including drugs and endogenous compounds. Structural information about these membrane-bound enzymes of the endoplasmic reticulum is limited. We do not know the identity or the location of the key residues for catalysis and binding of the aglycone substrate and the cosubstrate UDP-glucuronic acid (UDPGA). One suggestion was that His371 (UGT1A6 numbering) is the "catalytic base" that deprotonates the phenol group. We have now re-examined this hypothesis by analyzing the activities of the corresponding mutants, 6H371A (in UGT1A6) and the 9H369A (in UGT1A9). The K(m) values of mutant 6H371A for scopoletin and UDPGA were higher by 4- and 11-fold, respectively, than in UGT1A6. The K(d) for the enzyme-UDPGA complex, derived from bisubstrate kinetics, was about 9-fold higher in 6H371A than in UGT1A6, indicating severely impaired cosubstrate binding by the mutant. The effect of mutation on V(max) was large in UGT1A6 but variable in UGT1A9, suggesting that His371 does not play the catalytic role previously hypothesized. In both UGTs, the E379A mutation (UGT1A6 numbering) had an effect similar to that of the H371A mutations. A homology model of the putative UDPGA binding region of UGT1A6 was built using distant homologous protein structures from the "GT1 class." The combined results of activity determinations, kinetic analyses, and modeling strongly suggest that His371 and Glu379 are directly involved in UDPGA binding but are not the general acid or general base.

We solved the crystal structure of Streptococcus agalactiae serine/threonine phosphatase (SaSTP) using a combination of single-wavelength anomalous dispersion phasing and molecular replacement. The overall structure resembles that of previously characterized members of the PPM/PP2C STP family. The asymmetric unit contains four monomers and we observed two novel conformations for the flap domain among them. In one of these conformations, the enzyme binds three metal ions, whereas in the other it binds only two. The three-metal ion structure also has the active site arginine in a novel conformation. The switch between the two- and three-metal ion structures appears to be binding of another monomer to the active site of STP, which promotes binding of the third metal ion. This interaction may mimic the binding of a product complex, especially since the motif binding to the active site contains a serine residue aligning remarkably well with the phosphate found in the human STP structure.

We have determined the structures of the wild type and seven active site variants of yeast inorganic pyrophosphatase (PPase) in the presence of Mg 2+ and phosphate, providing the first complete structural description of its catalytic cycle. PPases catalyze the hydrolysis of pyrophosphate and require four divalent metal cations for catalysis; magnesium provides the highest activity. The crystal form chosen contains two monomers in the asymmetric unit, corresponding to distinct catalytic intermediates. In the "closed" wild-type active site, one of the two product phosphates has already dissociated, while the D115E variant "open" conformation is of the hitherto unobserved two-phosphate and two-"bridging" water active site. The mutations affect metal binding and the hydrogen bonding network in the active site, allowing us to explain the effects of mutations. For instance, in Y93F, F93 binds in a cryptic hydrophobic pocket in the absence of substrate, preserving hydrogen bonding in the active site and leading to relatively small changes in solution properties. This is not true in the presence of substrate, when F93 is forced back into the active site. Such subtle changes underline how low the energy barriers are between thermodynamically favorable conformations of the enzyme. The structures also allow us to associate metal binding constants to specific sites. Finally, the wild type and the D152E variant contain a phosphate ion adjacent to the active site, showing for the first time how product is released through a channel of flexible cationic side chains.

Membrane-bound pyrophosphatases (M-PPases) are homodimeric enzymes that couple the vectorial transport of protons and/or sodium ions to pyrophosphate (PPi) hydrolysis or synthesis. They are found in prokaryotes, plants, and protists and are thus present in all three domains of life. M-PPases have an important role in conferring tolerance against abiotic stress conditions and are also vital for plant maturation. Like many proteins that catalyze the formation or cleavage of phosphoanhydride bonds (e.g., P- and F-type ATPases, soluble PPases), M-PPases require magnesium for activity, both because they bind 2–3 free Mg2+ ions and because the catalytically relevant substrate at physiological pH and Mg ion concentration is Mg2PPi. Besides this alkaline earth metal, M-PPases also bind alkali metals: Na+-pumping M-PPases bind and transport Na+ and certain M-PPases bind and are activated by K+. In this article, we give a concise summary of the current structural and functional understanding of M-PPases, with an emphasis on describing the role of the metal ions in the enzymatic function of these proteins. 3D Structure Ribbon representation of the TmPPase dimer in the resting state (pbd: 4av3). The monomers are shown in cyan and in blue. In one of the monomers (show in cyan), the bound magnesium and calcium ions are shown in green and magenta, respectively. Keywords: membrane-bound pyrophosphatase; inorganic pyrophosphatase; sodium pump; proton pump; membrane protein

3-carboxy-cis,cis-muconate lactonizing enzymes participate in the protocatechuate branch of the 3-oxoadipate pathway of various aerobic bacteria. The gene encoding a 3-carboxy-cis,cis-muconate lactonizing enzyme (pcaB1S2) was cloned from a gene cluster involved in protocatechuate degradation by Agrobacterium radiobacter strain S2. This gene encoded for a 3-carboxy-cis,cis-muconate lactonizing enzyme of 353 amino acids - significantly smaller than all previously studied 3-carboxy-cis,cis-muconate lactonizing enzymes. This enzyme, ArCMLE1, was produced in Escherichia coli and shown to convert not only 3-carboxy-cis,cis-muconate but also 3-sulfomuconate. ArCMLE1 was purified as a His-tagged enzyme variant, and the basic catalytic constants for the conversion of 3-carboxy-cis,cis-muconate and 3-sulfomuconate were determined. In contrast, Agrobacterium tumefaciens 3-carboxy-cis,cis-muconate lactonizing enzyme 1 could not, despite 87% sequence identity to ArCMLE1, use 3-sulfomuconate as substrate. The crystal structure of ArCMLE1 was determined at 2.2 A resolution. Consistent with the sequence, it showed that the C-terminal domain, present in all other members of the fumarase II family, is missing in ArCMLE1. Nonetheless, both the tertiary and quaternary structures, and the structure of the active site, are similar to those of Pseudomonas putida 3-carboxy-cis,cis-muconate lactonizing enzyme. One principal difference is that ArCMLE1 contains an Arg, as opposed to a Trp, in the active site. This indicates that activation of the carboxylic nucleophile by a hydrophobic environment is not required for lactonization, unlike earlier proposals [Yang J, Wang Y, Woolridge EM, Arora V, Petsko GA, Kozarich JW & Ringe D (2004) Biochemistry43, 10424-10434]. We identified citrate and isocitrate as noncompetitive inhibitors of ArCMLE1, and found a potential binding pocket for them on the enzyme outside the active site.

We have solved the crystal structure of a PFL2 from Archaeglobus fulgidus at 2.9 A resolution. Of the three previously solved enzyme structures of glycyl radical enzymes, pyruvate formate lyase (PFL), anaerobic ribonucleotide reductase and glycerol dehydratase (GD), the last one is clearly most similar to PFL2. We observed electron density in the active site of PFL2, which we modelled as glycerol. The orientation of the glycerol is different from that in GD, and changes in the active site indicate that the actual substrate of PFL2 is bigger than a glycerol molecule, but sequence and structural homology suggest that PFL2 may be a dehydratase. Crystal packing, solution X-ray scattering and ultracentrifugation experiments show that PFL2 is tetrameric, unlike other glycyl radical enzymes. A. fulgidus is a hyperthermophile and PFL2 appears to be stabilized by several factors including an increased number of ion pairs, differences in buried charges, a truncated N terminus, anchoring of loops and N terminus via salt-bridges, changes in the oligomeric interface and perhaps also the higher oligomerization state of the protein.

A recombinant form of an acetyl coenzyme A synthetase (ADP-forming) from Pyrococcus furiosus has been crystallized. Crystallization was accomplished by the sitting-drop vapour-diffusion technique. Crystals belong to the monoclinic space group C2, with unit-cell parameters a = 131.3, b = 186.1, c = 121.5 angstroms, beta = 122.6 degrees, and diffract to 2.0 angstroms resolution on a synchrotron-radiation source. The unit-cell parameters allow twinning to the higher apparent space-group symmetry F222 by twin-lattice quasi-symmetry. The twinning fraction for the data is close to 40%. Two other data sets in the PDB show similar twinning.

Yeast inorganic pyrophosphatase (Y-PPase) is a model system for studying phosphoryl-transfer reactions catalysed by multiple metal ions. To understand the process requires knowledge of the positions of the protons in the active site, which can be best achieved by neutron diffraction analysis. In order to reduce the hydrogen incoherent-scattering background and to improve the signal-to-noise ratio of the neutron reflections, deuterated protein was produced. Deuterated protein 96% enriched with deuterium was produced in high yield and crystals as large as 2 mm on one side were obtained. These crystals have unit-cell parameters a = 58.9, b = 103.9, c = 117.0 A, alpha = beta = gamma = 90 degrees at 273 K and diffract neutrons to resolutions of 2.5-3 A. The X-ray structure of the perdeuterated protein has also been refined at 273 K to 1.9 A resolution.

GafD in Escherichia coli G (F17) fimbriae is associated with diarrheal disease, and the structure of the ligand-binding domain, GafD1-178, has been determined at 1.7 A resolution in the presence of the receptor sugar N -acetyl- d -glucosamine. The overall fold is a β-barrel jelly-roll fold. The ligand-binding site was identified and localized to the side of the molecule. Receptor binding is mediated by side-chain as well main-chain interactions. Ala43-Asn44, Ser116-Thr117 form the sugar acetamide specificity pocket, while Asp88 confers tight binding and Trp109 appears to position the ligand. There is a disulfide bond that rigidifies the acetamide specificity pocket. The three fimbrial lectins, GafD, FimH and PapG share similar β-barrel folds but display different ligand-binding regions and disulfide-bond patterns. We suggest an evolutionary path for the evolution of the very diverse fimbrial lectins from a common ancestral fold.