Search

International audience; The objective of this study was to compare several approaches to soil moisture (SM) retrieval using l-band microwave radiometry. The comparison was based on a brightness temperature (TB) data set acquired since 2010 by the L-band radiometer ELBARA-II over a vineyard field at the Valencia Anchor Station (VAS) site. ELBARA-II, provided by the European Space Agency (ESA) within the scientific program of the SMOS (Soil Moisture and Ocean Salinity) mission, measures multiangular TB data at horizontal and vertical polarization for a range of incidence angles (30°–60°). Based on a three year data set (2010–2012), several SM retrieval approaches developed for spaceborne missions including AMSR-E (Advanced Microwave Scanning Radiometer for EOS), SMAP (Soil Moisture Active Passive) and SMOS were compared. The approaches include: the Single Channel Algorithm (SCA) for horizontal (SCA-H) and vertical (SCA-V) polarizations, the Dual Channel Algorithm (DCA), the Land Parameter Retrieval Model (LPRM) and two simplified approaches based on statistical regressions (referred to as ‘Mattar’ and ‘Saleh’). Time series of vegetation indices required for three of the algorithms (SCA-H, SCA-V and ‘Mattar’) were obtained from MODIS observations. The SM retrievals were evaluated against reference SM values estimated from a multiangular 2-Parameter inversion approach. As no in situ SM data was used, the evaluation made here is relative to the use of this specific reference data set. The results obtained with the current base line algorithms developed for SMAP (SCA-H and -V) are in very good agreement with the ‘reference’ SM data set derived from the multi-angular observations (R2 ≈ 0.90, RMSE varying between 0.035 and 0.056 m3/m3 for several retrieval configurations). This result showed that, provided the relationship between vegetation optical depth and a remotely-sensed vegetation index can be calibrated, the SCA algorithms can provide results very close to those obtained from multi-angular observations in this study area. The approaches based on statistical regressions provided similar results and the best accuracy was obtained with the ‘Saleh’ methods based on either bi-angular or bipolarization observations (R2 ≈ 0.93, RMSE ≈ 0.035 m3/m3). The LPRM and DCA algorithms were found to be slightly less successful in retrieving the ‘reference’ SM time series (R2 ≈ 0.75, RMSE ≈ 0.055 m3/m3). However, the two above approaches have the great advantage of not requiring any model calibrations previous to the SM retrievals.

International audience; In this study, we used a multilinear regression approach to retrieve surface soil moisture from NASA's Soil Moisture Active Passive (SMAP) satellite data to create a global dataset of surface soil moisture which is consistent with ESA's Soil Moisture and Ocean Salinity (SMOS) satellite retrieved surface soil moisture. This was achieved by calibrating coefficients of the regression model using SMOS soil moisture and horizontal and vertical brightness temperatures (TB), over the 2013 — 2014 period. Next, this model was applied to recent SMAP TB data from 31/03/2015–08/09/2015. The retrieved surface soil moisture from SMAP (referred here to as SMAP-reg) was compared to the operational SMAP L3 surface soil moisture retrieved using the single channel algorithm. Both exhibit comparable temporal dynamics with a good agreement of correlation (correlation coefficient R mostly > 0.8) between the SMAP-reg and the operational SMAP L3 surface soil moisture products.

International audience; This study focused on atmospheric corrections of airborne thermal infrared remote sensing data acquired with a multidirectional and single broadband channel sensor during the ReSeDA experiment. For single channel sensors, atmospheric corrections are generally performed using atmospheric radiative transfer models such as MODTRAN 3.5 along with radiosoundings. A sensitivity study was performed using MODTRAN 3.5 simulations to assess the accuracy of the processing regarding the experimental context. It was shown that the local topography and the atmosphere spatial variability could affect significantly the radiosounding representativeness, whereas the fluctuations of the flight altitude around the nominal value induced non-negligible inaccuracies. Moreover, using a broadband sensor induced non-linear effects that required a second order correction and also the use of look-up tables to reduce computation time. A theoretical error was next proposed to account for both the sensor accuracy and the experimental uncertainties considered when performing the sensitivity study. This theoretical error was about VC, and agreed well with the results obtained when validating against field measurements.

International audience; A strong positive correlation between vegetation canopy bidirectional reflectance factor (BRF) in the near infrared (NIR) spectral region and foliar mass-based nitrogen concentration (%N) has been reported in some temperate and boreal forests. This relationship, if true, would indicate an additional role for nitrogen in the climate system via its influence on surface albedo and may offer a simple approach for monitoring foliar nitrogen using satellite data. We report, however, that the previously reported correlation is an artifact-it is a consequence of variations in canopy structure, rather than of %N. The data underlying this relationship were collected at sites with varying proportions of foliar nitrogen-poor needleleaf and nitrogen-rich broadleaf species, whose canopy structure differs considerably. When the BRF data are corrected for canopy-structure effects, the residual reflectance variations are negatively related to %N at all wavelengths in the interval 423-855 nm. This suggests that the observed positive correlation between BRF and %N conveys no information about %N. We find that to infer leaf biochemical constituents, e.g., N content, from remotely sensed data, BRF spectra in the interval 710-790 nm provide critical information for correction of structural influences. Our analysis also suggests that surface characteristics of leaves impact remote sensing of its internal constituents. This further decreases the ability to remotely sense canopy foliar nitrogen. Finally, the analysis presented here is generic to the problem of remote sensing of leaf-tissue constituents and is therefore not a specific critique of articles espousing remote sensing of foliar %N.

International audience; A physically based bare-surface soil moisture inversion technique for application with passive microwave satellite measurements, including the Advanced Microwave-Scanning Radiometer-Earth Observing System, Special Sensor Microwave/Imager, Scanning Multichannel Microwave Radiometer, and Tropical Rainfall Measuring Mission Microwave Imager, was developed in this paper. The inversion technique is based on the concept of a simple parameterized surface emission model, the Q(p) model, which was developed using advanced integral equation model simulations of microwave emission. Through evaluation of the relationship between roughness parameters Q(p) at different polarizations, it was found that they could be described by a linear function. Using this relationship and the surface enrissivities measured from two polarizations, the effect of the surface roughness is cancelled out. In other words, this approach consisted in adding different weights on the v and h polarization measurements so as to minimize the surface roughness effects. This method leads to a dual-polarization inversion technique for the estimation of the surface dielectric properties directly from the emissivity measurements. For validation, we compared the soil moisture estimates, derived from ground radiometer measurements at C- to Ka-band obtained from the Institute National de Recherches Agronorniques' field experimental data in 1993 and the Beltsville Agricultural Research Center's field experimental data at C- and X-band obtained in 1979-1982, with the field in situ soil moisture measurements. The accuracies [root-mean-square error (rmse)] are higher than 4% for the available experimental data at the incidence angles of 50 degrees and 60 degrees. The newly developed inversion technique should be very useful in monitoring global soil moisture properties using the currently available satellite instruments that commonly have incidence angles between 50 degrees and 55 degrees.

International audience; This study compared surface emissivity and radiometric temperature retrievals derived from data collected with the MODerate resolution Imaging Spectroradiometer (MODIS) and Advanced Spaceborne Thermal Emission Reflection Radiometer (ASTER) sensors, onboard the NASA's Earth Observation System (EOS)-TERRA satellite. Two study sites were selected: a semi-arid area located in northern Chihuahuan desert, USA, and a Savannah landscape located in central Africa. Atmospheric corrections were performed using the MODTRAN 4 atmospheric radiative transfer code along with atmospheric profiles generated by the National Center for Environmental Predictions (NCEP). Atmospheric radiative properties were derived from MODTRAN 4 calculations according to the sensor swaths, which yielded different strategies from one sensor to the other. The MODIS estimates were then computed using a designed Temperature-Independent Spectral Indices of Emissivity (TISIE) method. The ASTER estimates were derived using the Temperature Emissivity Separation (TES) algorithm. The MODIS and ASTER radiometric temperature retrievals were in good agreement when the atmospheric corrections were similar, with differences lower than 0.9 K. The emissivity estimates were compared for MODIS/ASTER matching bands at 8.5 and 11 μm. It was shown that the retrievals agreed well, with RMSD ranging from 0.005 to 0.015, and biases ranging from −0.01 to 0.005. At 8.5 μm, the ranges of emissivities from both sensors were very similar. At 11 μm, however, the ranges of MODIS values were broader than those of the ASTER estimates. The larger MODIS values were ascribed to the gray body problem of the TES algorithm, whereas the lower MODIS values were not consistent with field references. Finally, we assessed the combined effects of spatial variability and sensor resolution. It was shown that for the study areas we considered, these effects were not critical.

International audience; The airborne PolDER data acquired during the ReSeDA experiment were used to assess the accuracy of the narrowband to broadband conversion, commonly used to express the integrated value of albedo as a linear combination of waveband estimates. We focused on the estimation of shortwave, visible and near infrared apparent albedos from waveband hemispherical reflectances. The latter were computed using four classical linear BRDF kernel-driven models. The relative discrepancy over the estimates from the four models was about 10%. The narrowband to broadband conversion was performed considering several coefficient sets devoted to recent sensors. The validation against field measurements showed a relative accuracy of shortwave albedo about 9%, whereas it emphasized the quality of visible and near infrared albedos through an indirect procedure. However, the consequences of the theoretical uncertainties, made when calibrating the coefficient sets we used, remain unknown. Similarly, the calibration of coefficient sets devoted to the shortwave albedo estimation from PolDER data showed that it was not possible to discriminate the information provided by the blue, green and red PolDER channels. Indeed, the hemispherical reflectance data set we used was not accurate enough to address experimentally the validity of the spectral interpolation method. Finally, the calibration of coefficients showed that it might be possible to calculate shortwave albedo with a relative error of 8% using only red and near infrared channels.; Les données aéroportées PolDER acquises durant l'expérimentation ReSeDA ont été utilisées pour évaluer la précision de la méthode "narrowband to broadband conversion", communément utilisée pour exprimer la valeur intégrée de l'albedo comme une combinaison linéaire de mesures spectrales. Nous sommes intéressés à l'estimation de l'albedo apparent visible-proche infrarouge-courtes longueurs d'onde à partir de la réflectance hémisphérique. Cette dernière a été calculée en utilisant quatre modèles classiques de FDRB à noyaux. La dispersion relative entre les estimations des quatre modèles était de l'ordre de 10 %. Nous avons calculé la valeur intégrée de l'albedo en utilisant des jeux de coefficients proposés dans la littérature pour des capteurs récents. La validation a montré que l'albedo courtes longueurs d'onde PolDER avait une précision relative de l'ordre de 9 %, alors qu'une procédure indirecte a mis en évidence la qualité des albedo visible et proche infrarouge. Cependant, les estimations de réflectance hémisphérique n'étaient pas assez précises pour évaluer les conséquences des incertitudes théoriques des jeux de coefficients. De même, la calibration de jeux de coefficients à l'aide des données ReSeDA a montré qu'il n'était pas possible de discriminer l'information fournie par les canaux PolDER bleu, vert et rouge. Finalement, il était possible de calculer l'albedo avec une précision relative de 8 % en ne considérant que les canaux rouge et proche infrarouge.