Search

A slit structure consisted of two bending graphene membranes is built as a nano check valve theoretically. Molecular dynamics simulations are used to investigate the opening and closing of this check valve. The backflow through the valve are also studied. The results show that the check valve can maintain the unidirectional flow of fluid and prevent backflow within the appropriate pressure range. Specifically, the opening and closing pressure of the valve are 148.2 and 24.6 MPa, respectively. The maximum working pressure of the check valve should be lower than 197.6 MPa. Moreover, the water passing rate is larger at a higher pressure due to the larger slit width and water flux. This check valve is expected to have many potential applications in the nanofluidic field.

We demonstrate that the interference pattern of the plasmonic and photonic modes can be controlled by changing the slit width of a square slit structure. Based on the analyses of the plasmonic and photonic modes of slits with different widths, we theoretically derived the expressions of wavefield generated by a square slit. A far-field scattered imaging system is utilized to collect the intensity distribution experimentally. Various interference patterns, including stripes, square-like lattice array, and diamond-like lattice array, have been observed by adjusting the slit widths. In addition, the results were validated by performing finite-difference time-domain simulations, which are consistent with the theoretical and experimental results.

The critical temperatures of bulk and confined atomic fluids are investigated using values of the vapour−liquid interfacial free energy of coexistence obtained from grand-canonical transition-matrix Monte Carlo simulations using a histogram reweighting technique. The temperature corresponding to zero interfacial free energy of coexistence is the estimated critical temperature for the system under investigation. Slit width of confined atomic fluid for this investigation is varied from 40 to 1 fluid particle diameter. The obtained critical temperatures have shown nonlinear monotonic trend with inverse of slit width. Moreover, five different linear regimes of critical temperature are observed in the studied range of slit width. Interestingly, in the slit width range of less than two fluid particle diameters, the critical temperature approaches two-dimensional value and remains approximately indifferent with a decrease in slit width up to one fluid particle diameter. This investigation also reveals th...

Time-gated Raman system has been assembled using a pulsed laser and high-resolution echelle spectrograph. Echelle spectrograph provides broad spectral band-pass of 0–8500 cm�1 in a single scan with a resolution of 1.75 cm�1 for 532 nm at an extremely small slit width of 10 μm. Advantages of gated mode detection over continuous-wave mode detection are improved signal-to-noise ratio, reduced background signal, and unwanted fluorescent emission. Feasibility of echelle spectrograph for Raman measurements has been tested for both conventional and standoff distance of 5 m with all the external illumination sources on. The echelle system provides high-quality Raman signals with an extremely low inherent bandwidth in solid and liquid samples, (~8 cm�1 ) for 478 cm�1 fundamental band of sulfur. Intensity ratio of e2 fundamental to a1 fundamental of conventional and remote Raman measurements indicates that the spectral features remain the same in both measurements. The advantages of ‘time-gated’ Raman compared with continuous-wave mode detection, like low background even under extraneous illumination and lowered fluorescence, are also illustrated with spectrum of sulfur taken in the two modes.

In this paper, a three-dimensional numerical model of H-type finned tube heat exchangers has been built. In order to optimize its structure and improve its performance, Taguchi method is applied to investigate the influence of seven geometric parameters including slit width, row number, fin height, spanwise tube pitch, longitudinal tube pitch, fin thickness and fin pitch. Numerical simulations are performed on eighteen cases with different combinations of seven geometric parameters and the overall thermal–hydraulic performance and its characteristics of heat transfer and flow friction are discussed in detail. The results show that fin pitch and fin height play a significant role on the heat transfer characteristics while the flow friction characteristics are mainly affected by fin height, spanwise tube pitch and fin pitch. The intuitive analysis and analysis of variance show that fin pitch, fin height and fin thickness have much stronger influence on its overall thermal–hydraulic performance than the rest four parameters. Finally, the optimal parametric combination of the H-type finned tube is obtained with an improvement of overall thermal–hydraulic performance by 11.4–16% for Re in range from 9000 to 24,000.

We present analytical solutions for the principal maxima in multiple slit diffraction. By expanding the angular position of the principal maxima in orders of a / d where d is the distance between two adjacent slits and a is the width of each slit, we obtain the angular position of the principal maxima up to the twelfth order in a / d .

We study the conformational behavior of spherical polyelectrolyte brushes in the presence of monovalent and trivalent counterions in a confined environment. The confinement is exerted by two parallel walls on the brushes. The enhancement of the confinement induces the extension of grafted chains. For the monovalent case, the increase of the charge fraction leads to extended brush conformation for different slit width (distance between two walls) but collapsed brush in the presence of trivalent counterions is observed. The confinement does not affect electrostatic correlation between trivalent counterions and charged monomers. However, it was found that narrow slit width contributes to stronger electrostatic correlation for the monovalent case. This is because more monovalent counterions are inside the brush at strong confinement, but almost all trivalent counterions are trapped into the brush independently of the slit width. The diffusion of counterions under the confinement is related to the electrostatic correlation. Our simulations also reveal that the brush thickness depends on the slit width nonlinearly.

Understanding the translocation of soft, conformable single-chain polymer nanoparticles (SCNPs) with intricate topology through nanopores and nanoslits is of great interest for several potential applications, including modern single-molecule analytical characterization methods. This work focus on the ultrafiltration of an elastic SCNP of size R through a cylindrical pore of diameter D « R or a rectangular slit of width H « R under an elongational flow field. Concerning SCNP ultrafiltration through nanopores of different diameter, we find a scaling law in qualitative agreement with recent results concerning the ability of soft conformable nanoparticles to translocate through pores at least tenfold smaller in size. Moreover, SCNP ultrafiltration through rectangular nanoslits provides a simple way to determine the elasticity parameter of a real SCNP based on its experimentally determined minimum slit width for effective ultrafiltration., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2017 (RED 101/17), is acknowledged. J.R.-C. is grateful to the Materials Physics Center MPC for his predoctoral grant. E. G. received funding from the “Fellows Gipuzkoa” fellowship of the Gipuzkoako Foru Aldundia.

We look into the electrostatic screening in ionic liquids through the calculations of structural profiles and surface forces inside the slit system with varying width. The strong ion-ion correlation is modeled with ion pair association using reaction-based classical density functional theory. The equilibrium densities and ion pair fraction are solved iteratively. For pure ionic liquids, the oscillation of charge density is damped over relatively short range while surface force decays exponentially in the long range. Pair fraction approaches the bulk value asymptotically with growing slit width. Different components of surface force are identified according to various types of interactions.

Corresponding states vapour–liquid phase equilibria of confined square-well fluid are studied by means of grand-canonical transition-matrix Monte Carlo simulation and histogram reweighting method. In this study, square-well fluid is considered under hard and attractive slit pore confinements ranging from 1.5 to 40 molecular diameters. Corresponding states vapour–liquid phase coexistence envelopes display insignificant effect of wall−fluid interaction for slit pore confinements ranging from 1.5 to 3 molecular diameters. On the other hand, significant effect of wall−fluid interaction on the corresponding state coexistence envelope is observed for slit pore confinements ranging from 4 to 40 molecular diameters. Moreover, at a given slit width, shrinking in corresponding state coexistence envelope is observed with increase in the wall−fluid interaction. However, in the larger slit pore width of 30 to 40 molecular diameters, shrinking in the corresponding state vapour–liquid coexistence envelopes become indifferent with the stronger wall−fluid interactions studied in this work. Structural behaviour of coexisting phases in slit pores are also investigated through local density profiles, to understand the overall behaviour of corresponding states coexistence envelopes. Fluctuating positive and negative deviations in the corresponding state spreading pressure with respect to corresponding bulk value is observed for studied wall−fluid interactions and slit pore confinements.

Double-slit imaging is widely used for verifying the resolution of high-resolution and super-resolution microscopies. However, due to the fabrication limits, the slit width is generally non-negligible, which can affect the claimed resolution. In this paper we theoretically calculate the electromagnetic field distribution inside and near the metallic double slit using waveguide mode expansion method, and acquire the far-field image by vectorial Fourier optics. We find that the slit width has minimal influence when the illuminating light is polarized parallel to the slits. In this case, the claimed resolution should be based on the center-to-center distance of the double-slit. MOE (Min. of Education, S’pore) Published version

International audience; The isosteric heat of the carbon dioxide adsorption on activated carbon is determined by grand canonical Monte Carlo simulations. The results, obtained at room temperature and low pressures for an adorbent model with a slit type porosity, show that the isosteric heat depends strongly on the slit width. The maximun of the isosteric heat is reached for a pore with a width such as cooperative effects between the adsorbed molecules enhance the adsorption. The possibility to estimate the isosteric heat of a macroscopic sample, from adsorption isotherms computed for a distribution of slit pores with given sizes, is discussed.

Efavirenz inhibits the activity of viral RNA-directed DNA polymerase (i.e reverse transcriptase). The present work describes a simple, precise and accurate HPTLC method for its estimation as bulk and in tablet dosage form. The chromatographic separation was carried out on precoated silica gel 60F254 aluminium plates using mixture of chloroform: ethyl acetate (9:1 v/v) as mobile phase and densitometric evaluation of spots was carried out at 247 nm using Camag TLC Scanner-3 with win CAT 1.3.4 version software. The experimental parameters like band size of the spot applied, chamber saturation time, solvent front migration, slit width etc. were critically studied and optimum conditions were evolved. The accuracy and reliability of the proposed method was ascertained by evaluating various validation parameters like linearity (1000-5000 ng/spot), precision (intra-day RSD 0.66-1.44%, inter-day RSD 0.87-1.42%), accuracy (98.07 to 99.07 %) and specificity according to ICH guidelines. The proposed method can analyze eight or more formulation units simultaneously on a single plate and provide a faster and cost-effective quality control tool for routine analysis of efavirenz as bulk drug and in tablet formulation.

16th Conference of Novel Optical Systems Design and Optimization, August 26-28, 2013, San Diego, CA, USA, Series: Proceedings of SPIE

We use few-body methods to investigate the diffraction of weakly bound systems by a transmission grating. For helium dimers, He2, we obtain explicit expressions for the transition amplitude in the elastic channel.