Search

Tissue adhesives play an important role in clinical applications and may aid in the treatment of cartilage defects for improved cartilage integration. However, many fail to satisfy the demand for adequate adhesive strength on wet tissue surfaces and to facilitate sufficient cell migration and extracellular matrix (ECM) deposition at the defect site. Utilizing poly(2-alkyl-2-oxazoline) (POx)-based polymers equipped with mussel-inspired adhesion moieties and combining them with the natural wound sealant fibrinogen, we fabricated an adhesive biosynthethic hydrogel with tunable mechanical properties and improved bonding strength. Degradation of the hydrogels could be adjusted by the ratio of amide to ester linkages of the catecholic functional group at the POx side chain. In an in vitro disc/ring model for lateral cartilage integration, a benefit in long-term integration was observed with enhanced degradation of the adhesive without the expense of bonding strength. Incorporation of degradable ester linkages in the polymer facilitated cell invasion and strong deposition of cartilaginous ECM at the defect site. Overall, the results suggest that the presented injectable adhesive hydrogel, due to its easy tunability, holds great potential for cartilage defect treatment and other medical applications.

This study concerns hydrogels obtained from poly(oxazolines) bearing charged groups and their effect on the loading and release of guest molecules., We describe the preparation of hydrogels using highly functionalized poly(oxazoline) based polymeric precursors and cross-linking via UV mediated radical thiol–ene chemistry. Random copolymers were synthesized based on the combination of the more hydrophilic 2-methyl-2-oxazoline or the less hydrophilic monomer 2-ethyl-2-oxazoline with 2-(3-butenyl)-2-oxazoline. These copolymers were functionalized via a post-polymerization technique with thiol or cysteine functionality at the side chain. Hence, hydrogels were obtained, for which the thermo-responsive behavior, network density and correlated properties such as swelling and mechanics, as well as the possibility of electrostatic interaction, can be tuned. Cell culture tests demonstrated good cytocompatibility of the synthesized copolymers and hydrogels. A study with two low molecular weight substances, methylene blue and fluorescein sodium, was performed to investigate how the thermo-responsive behavior or the positive charge incorporated by cysteine could influence the interaction with the compounds. It was found that the interaction with the hydrogel network was strongly influenced by the chemical properties of the dye. A hydrophilic and positively charged hydrogel network was shown to be a promising candidate for the uptake and prolonged release of negatively charged low molecular weight substances.

Biointerface engineering is a wide-spread strategy to improve the healing process and subsequent tissue integration of biomaterials. Especially the integration of specific peptides is one promising strategy to promote the regenerative capacity of implants and 3D scaffolds. In vivo, these tailored interfaces are, however, first confronted with the innate immune response. Neutrophils are cells with pronounced proteolytic potential and the first recruited immune cells at the implant site; nonetheless, they have so far been underappreciated in the design of biomaterial interfaces. Herein, an in vitro approach is introduced to model and analyze the neutrophil interaction with bioactivated materials at the example of nano-bioinspired electrospun surfaces that reveals the vulnerability of a given biointerface design to the contact with neutrophils. A sacrificial, transient hydrogel coating that demonstrates optimal protection for peptide-modified surfaces and thus alleviates the immediate cleavage by neutrophil elastase is further introduced.

Recent research has been focusing on the generation of living personalized osteochondral constructs for joint repair. Native articular cartilage has a zonal structure, which is not reflected in current constructs and which may be a cause of the frequent failure of these repair attempts. Therefore, we investigated the performance of a composite implant that further reflects the zonal distribution of cellular component both in vitro and in vivo in a long-term equine model. Constructs constituted of a 3D-printed poly(ϵ-caprolactone) (PCL) bone anchor from which reinforcing fibers protruded into the chondral part of the construct over which two layers of a thiol-ene cross-linkable hyaluronic acid/poly(glycidol) hybrid hydrogel (HA-SH/P(AGE-co-G)) were fabricated. The top layer contained Articular Cartilage Progenitor Cells (ACPCs) derived from the superficial layer of native cartilage tissue, the bottom layer contained mesenchymal stromal cells (MSCs). The chondral part of control constructs were homogeneously filled with MSCs. After six months in vivo, microtomography revealed significant bone growth into the anchor. Histologically, there was only limited production of cartilage-like tissue (despite persistency of hydrogel) both in zonal and non-zonal constructs. There were no differences in histological scoring; however, the repair tissue was significantly stiffer in defects repaired with zonal constructs. The sub-optimal quality of the repair tissue may be related to several factors, including early loss of implanted cells, or inappropriate degradation rate of the hydrogel. Nonetheless, this approach may be promising and research into further tailoring of biomaterials and of construct characteristics seems warranted.

One of the main problems encountered in cancer pathologies is the lack of proper in vitro systems resembling the architecture of tumoral tissues. Since 2D surfaces do not represent the morpho-mechanical characteristics of malignant milieus, 3D systems are rapidly gaining interest in the field of Biomaterials for Cancer Research. In this work, we used a new kind of hydrogel-based scaffold constituted by crosslinked alginate di-aldehyde (ADA) and gelatin (GEL) to mimic the tumoral milieu in vitro by biofabrication. For this purpose, flat 2D films and 3D bioprinted scaffolds were crosslinked with solutions of calcium, barium, and combinations of the two. These structures were analyzed in terms of their chemical and mechanical properties, as well as their biological compatibility in the presence of the tumoral cell line HCT116 (colorectal cancer). Our results indicate that ADA-GEL, crosslinked with these divalent ions, can perform effectively as an artificial cancer model, matching the mechanical properties of colorectal tumors, as well as enabling cell growth in confinement. Furthermore, the use of different combinations of divalent ions allowed the tailoring of the mechanical properties of the material. The cell-loaded ADA-GEL constructs are not significantly affected by the type of crosslinking ion. The best outcome was achieved when 3D printed structures were produced with an ADA concentration of 2.5 (w/v)% and crosslinked with barium, showing remarkable results in terms of printability and mechanical properties. With this composition and barium as the crosslinking ion, a stiffness of 44.97 kPa was achieved, compared with calcium crosslinked samples, where it was only possible to achieve an elastic modulus of 21.55 kPa. This work demonstrates that ADA-GEL-based matrices are a very interesting option to perform as tumor-like scaffolds, which could be used to improve current methods of drug testing as well as for personalized medicine.

Advances in Tissue Engineering (TE) demand strategies to apply new biomaterials and processing technologies. In this context, especially computer aided additive manufacturing (AM) has turned out as a promising tool to tailor scaffold architectures with high precision. However, there is currently a lack of appropriate AM methods, since the majority face serious drawbacks regarding printing accuracy and speed, as well as limitations regarding the range of applicable biomaterials. Here, we present the simple AM processing of poly(lactide-block-ethylene glycol-block-lactide) (PLA-PEG-PLA) triblock copolymers via melt electrospinning writing (MEW). Furthermore, we demonstrate the accurate deposition of fibers (fO = 31 ± 2 µm) made of copolymer blends with low-molecular PLA incorporating solid 45S5 bioactive glass (BG) particles. Thus, we introduce MEW for the printing of highly porous, particle loaded scaffolds with micron-sized composite fibers with potential application in bone TE.

Melt electrowriting (MEW) is an emerging additive manufacturing technology that direct-writes low-micron diameter fibers into 3D scaffolds with high porosities. Often, the polymers currently used for MEW are hydrophobic thermoplastics that induce unspecific protein adsorption and subsequent uncontrolled cell adhesion. Here are developed a coating strategy for MEW scaffolds based on six-arm star-shaped NCO-poly(ethylene oxide-stat-propylene oxide) (sP(EO-stat-PO)). This permanently hydrophilizes the PCL through the formation of a hydrogel coating and minimizes unspecific interactions with proteins and cells. It also provides the option of simultaneous covalent attachment of bioactive molecules through reaction with isocyanates before these are hydrolyzed. Furthermore, a photoactivatable chemical functionalization is introduced that is not dependent on the time-limited window of isocyanate chemistry. For this, photo-leucine is covalently immobilized into the sP(EO-stat-PO) layer, resulting in a photoactivatable scaffold that enables the binding of sterically demanding molecules at any timepoint after scaffold preparation and coating and is decoupled from the isocyanate chemistry. A successful biofunctionalization of MEW scaffolds via this strategy is demonstrated with streptavidin and collagen as examples. This hydrogel coating system is a generic one that introduces flexible specific and multiple surface functionalization, potentially for a spectrum of polymers made from different manufacturing processes.

In this study we introduce linear poly(glycidol) (PG), a structural analog of poly(ethylene glycol) bearing side chains at each repeating unit, as polymer basis for bioink development. We prepare allyl- and thiol-functional linear PG that can rapidly be polymerized to a three-dimensionally cross-linked hydrogel network via UV mediated thiol-ene click reaction. Influence of polymer concentration and UV irradiation on mechanical properties and swelling behavior was examined. Thiol-functional PG was synthesized in two structural variations, one containing ester groups that are susceptible to hydrolytic cleavage, and the other one ester-free and stable against hydrolysis. This allowed the preparation of degradable and non-degradable hydrogels. Cytocompatibility of the hydrogel was demonstrated by encapsulation of human bone marrow-derived mesenchymal stem cells (hBMSCs). Rheological properties of the hydrogels were adjusted for dispense plotting by addition of high molecular weight hyaluronic acid. The optimized formulation enabled highly reproducible plotting of constructs composed of 20 layers with an overall height of 3.90 mm.

In 3D bioprinting, bioinks with high concentrations of polymeric materials are frequently used to enable fabrication of 3D cell-hydrogel constructs with sufficient stability. However, this is often associated with restricted cell bioactivity and an inhomogeneous distribution of newly produced extracellular matrix (ECM). Therefore, this study investigates bioink compositions based on hyaluronic acid (HA), an attractive material for cartilage regeneration, which allow for reduction of polymer content. Thiolated HA and allyl-modified poly(glycidol) in varying concentrations are UV-crosslinked. To adapt bioinks to poly(ε-caprolactone) (PCL)-supported 3D bioprinting, the gels are further supplemented with 1 wt% unmodified high molecular weight HA (hmHA) and chondrogenic differentiation of incorporated human mesenchymal stromal cells is assessed. Strikingly, addition of hmHA to gels with a low polymer content (3 wt%) results in distinct increase of construct quality with a homogeneous ECM distribution throughout the constructs, independent of the printing process. Improved ECM distribution in those constructs is associated with increased construct stiffness after chondrogenic differentiation, as compared to higher concentrated constructs (10 wt%), which only show pericellular matrix deposition. The study contributes to effective bioink development, demonstrating dual function of a supplement enabling PCL-supported bioprinting and at the same time improving biological properties of the resulting constructs.

Many different biofabrication approaches as well as a variety of bioinks have been developed by researchers working in the field of tissue engineering. A main challenge for bioinks often remains the difficulty to achieve shape fidelity after printing. In order to overcome this issue, a homogeneous pre-crosslinking technique, which is universally applicable to all alginate-based materials, was developed. In this study, the Young’s Modulus after post-crosslinking of selected hydrogels, as well as the chemical characterization of alginate in terms of M/G ratio and molecular weight, were determined. With our technique it was possible to markedly enhance the printability of a 2% (w/v) alginate solution, without using a higher polymer content, fillers or support structures. 3D porous scaffolds with a height of around 5 mm were printed. Furthermore, the rheological behavior of different pre-crosslinking degrees was studied. Shear forces on cells as well as the flow profile of the bioink inside the printing nozzle during the process were estimated. A high cell viability of printed NIH/3T3 cells embedded in the novel bioink of more than 85% over a time period of two weeks could be observed.

In this study, we evaluate hydrogels based on oxidized hyaluronic acid, cross-linked with adipic acid dihydrazide, for their suitability as bioinks for 3D bioprinting. Aldehyde containing hyaluronic acid (AHA) is synthesized and cross-linked via Schiff Base chemistry with bifunctional adipic acid dihydrazide (ADH) to form a mechanically stable hydrogel with good printability. Mechanical and rheological properties of the printed and casted hydrogels are tunable depending on the concentrations of AHA and ADH cross-linkers.

With respect to the composition of natural bone, we established a degradable dual setting system of different poly(ethylene glycol) (PEG)-based hydrogels combined with a brushite cement. The idea was to reinforce the inorganic calcium phosphate mineral phase with an organic, polymeric phase to alter the cement’s properties towards ductility and elasticity. Extremely flexible samples were produced via this dual setting approach with a fully reversible elasticity of the samples containing high molecular weight PEG-based hydrogel precursors. Using the decalcifying agent EDTA, the whole inorganic phase was dissolved due to Ca2+-complexation and dimensionally stable hydrogels were obtained, indicating a homogenous polymeric phase within the composites. This was also confirmed by SEM-analysis, where no discontinuities or agglomerations of the phase were observed. Additional XRD-measurements proved a significant influence of the coherent polymeric matrix on the conversion from β-TCP/MCPA to brushite with a decrease in signal intensity. The results confirmed a parallelly running process of setting reaction and gelation without an inhibition of the conversion to brushite and the formation of interpenetrating networks of hydrogel and cement. The strengths of this newly developed dual setting system are based on the material degradability as well as flexibility, which can be a promising tool for bone regeneration applications in non-load bearing craniomaxillofacial defects. Statement of Significance Brushite based calcium phosphate cements (CPCs) are known as bone replacement materials, which degrade in vivo and are replaced by native bone. However, the pure inorganic material shows a brittle fracture behavior. Here, the addition of a polymeric phase can influence the mechanical properties to create more ductile and flexible materials. This polymeric phase should ideally form during cement setting by a polymerization reaction to achieve high polymer loads without altering cement viscosity and it should be degradable in vivo similar to the cement itself. Therefore, we developed a dual setting system based on simultaneous cement setting of brushite and lactide modified poly(ethylene glycol) dimethacrylate (PEG-PLLA-DMA)-based hydrogel. It was evident that the gels form a continuous phase within the cement after radical polymerization with a strong reduction of cement brittleness.

A bilateral barrier membrane for the prevention of postsurgical adhesions was developed. Thereby, a smooth PLA side was supposed to keep the affected tissues glidingly separated, while a mucoadhesive side made of alginate was meant to keep the barrier resident on the site of injury so that suturing becomes redundant or at least the membrane stays long enough to facilitate surgical handling. Because hydrophilic alginate and lipophilic PLA films show only low cohesion, solution electrospun meshes of PLA and PLA-PEG-PLA triblock copolymers with varying poly(ethylene glycol) [PEG] content were investigated as cohesion promoter to avoid an easy separation of the functionally different layers. Using direct electrospinning onto the PLA film, a modified contact surface of the mesh was created, which allowed the tested alginate solutions (3%, 5%) to infiltrate to different extents. Thereby, an increasing content of hydrophilic PEG within the mesh copolymer and a lower alginate concentration facilitated the infiltration. As a result, the PLA film with a PLA35k-PEG10k-PLA35k (racemic PLA chains) mesh and an alginate layer cast from a 3% alginate solution appeared to be the most effective combination as examined by means of a t peel test, a mucoadhesion test, a tensile test and optical evaluations. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1563-1570, 2016.

Dual setting cements composed of an in situ forming hydrogel and a reactive mineral phase combine high compressive strength of the cement with sufficient ductility and bending strength of the polymeric network. Previous studies were focused on the modification with non-degradable hydrogels based on 2-hydroxyethyl methacrylate (HEMA). Here, we describe the synthesis of suitable triblock degradable poly(ethylene glycol)-poly(lactide) (PEG-PLLA) cross-linker to improve the resorption capacity of such composites. A study with four different formulations was established. As reference, pure hydroxyapatite (HA) cements and composites with 40 wt% HEMA in the liquid cement phase were produced. Furthermore, HEMA was modified with 10 wt% of PEG-PLLA cross-linker or a test series containing only 25% cross-linker was chosen for composites with a fully degradable polymeric phase. Hence, we developed suitable systems with increased elasticity and 5&ndash, 6 times higher toughness values in comparison to pure inorganic cement matrix. Furthermore, conversion rate from &alpha, tricalcium phosphate (&alpha, TCP) to HA was still about 90% for all composite formulations, whereas crystal size decreased. Based on this material development and advancement for a dual setting system, we managed to overcome the drawback of brittleness for pure calcium phosphate cements.

In cartilage regeneration, the biomimetic functionalization of hydrogels with growth factors is a promising approach to improve the in vivo performance and furthermore the clinical potential of these materials. In order to achieve this without compromising network properties, multifunctional linear poly(glycidol) acrylate (PG-Acr) is synthesized and utilized as crosslinker for hydrogel formation with thiol-functionalized hyaluronic acid via Michael-type addition. As proof-of-principle for a bioactivation, transforming growth factor-beta 1 (TGF-β1) is covalently bound to PG-Acr via Traut's reagent which does not compromise the hydrogel gelation and swelling behavior. Human mesenchymal stromal cells (MSCs) embedded within these bioactive hydrogels show a distinct dose-dependent chondrogenesis. Covalent incorporation of TGF-β1 significantly enhances the chondrogenic differentiation of MSCs compared to hydrogels with supplemented noncovalently bound TGF-β1. The observed chondrogenic response is similar to standard cell culture with TGF-β1 addition with each medium change. In general, multifunctional PG-Acr offers the opportunity to introduce a range of biomimetic modifications (peptides, growth factors) into hydrogels and, thus, appears as an attractive potential material for various applications in regenerative medicine.