Search

Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the front-end fiber injection system, or acquisition camera, for the SX (left) primary mirror of the LBT. The instrument was installed in 2019 and underwent on-sky commissioning and performance assessment. In this paper, we present the instrument requirements, acquisition camera design, as well as results from first-light measurements. Broadband single-mode fiber coupling in excess of 35% (absolute) in the near-infrared (0.97-1.31{\mu}m) was achieved across a range of target magnitudes, spectral types, and observing conditions. Successful demonstration of on-sky performance represents both a major milestone in the development of iLocater and in making efficient ground-based SMF-fed astronomical instruments a reality., Comment: 18 pages, 17 figures. Accepted for publication in MNRAS

Following the previous article, here we describe the first field demonstration of the ELVIS system, performed at Newport Beach, CA. We examined ocean water to detect microorganisms using the combined holographic and light-field fluorescence microscope and successfully detected both eukaryotes and prokaryotes. The shared field of view provided simultaneous bright-field (amplitude), phase, and fluorescence information from both chlorophyll autofluorescence and acridine orange staining. The entire process was performed in a nearly autonomous manner using a specifically designed sample processing unit (SPU) and custom acquisition software. We also discuss improvements to the system made after the field test that will make it more broadly useful to other types of fluorophores and samples.

Integrated photonic spectrographs offer an avenue to extreme miniaturization of astronomical instruments, which would greatly benefit extremely large telescopes and future space missions. These devices first require optimization for astronomical applications, which includes design, fabrication and field-testing. Given the high costs of photonic fabrication, Multi-Project Wafer (MPW) SiN offerings, where a user purchases a portion of a wafer, provide a convenient and affordable avenue to develop this technology. In this work we study the potential of two commonly used SiN waveguide geometries by MPW foundries, i.e. square and rectangular profiles to determine how they affect the performance of mid-high resolution arrayed waveguide grating spectrometers around 1.5 $\mu$m. Specifically, we present results from detailed simulations on the mode sizes, shapes, and polarization properties, and on the impact of phase errors on the throughput and cross talk as well as some laboratory results of coupling and propagation losses. From the MPW-run tolerances and our phase-error study, we estimate that an AWG with R $\sim$ 10,000 can be developed with the MPW runs and even greater resolving power is achievable with more reliable, dedicated fabrication runs. Depending on the fabrication and design optimizations, it is possible to achieve throughputs $\sim 60\%$ using the SiN platform. Thus, we show that SiN MPW offerings are highly promising and will play a key role in integrated photonic spectrograph developments for astronomy., Comment: Accepted at Applied Optics, Special Issue on Astrophotonics (24 pages, 13 figures, 3 tables)

Direct exoplanet spectroscopy aims to measure the spectrum of an exoplanet while simultaneously minimizing the light collected from its host star. Isolating the planet light from the starlight improves the signal-to-noise ratio (S/N) per spectral channel when noise due to the star dominates, which may enable new studies of the exoplanet atmosphere with unprecedented detail at high spectral resolution (>30,000). However, the optimal instrument design depends on the flux level from the planet and star compared to the noise due to other sources, such as detector noise and thermal background. Here we present the design, fabrication, and laboratory demonstration of specially-designed optics to improve the S/N in two potential regimes in direct exoplanet spectroscopy with adaptive optics instruments. The first is a pair of beam-shaping lenses that increase the planet signal by improving the coupling efficiency into a single-mode fiber at the known position of the planet. The second is a grayscale apodizer that reduces the diffracted starlight for planets at small angular separations from their host star. The former especially increases S/N when dominated by detector noise or thermal background, while the latter helps reduce stellar noise. We show good agreement between the theoretical and experimental point spread functions in each case and predict the exposure time reduction ($\sim 33\%$) that each set of optics provides in simulated observations of 51 Eridani b using the Keck Planet Imager and Characterizer instrument at W.M. Keck Observatory., 13 pages, 13 figures

We present new near-infrared Gemini Planet Imager (GPI) spectroscopy of HD 206893 B, a substellar companion orbiting within the debris disk of its F5V star. The $J$, $H$, $K1$, and $K2$ spectra from GPI demonstrate the extraordinarily red colors of the object, confirming it as the reddest substellar object observed to date. The significant flux increase throughout the infrared presents a challenging atmosphere to model with existing grids. Best-fit values vary from 1200 K to 1800 K for effective temperature and from 3.0 to 5.0 for log($g$), depending on which individual wavelength band is fit and which model suite is applied. The extreme redness of the companion can be partially reconciled by invoking a high-altitude layer of sub-micron dust particles, similar to dereddening approaches applied to the peculiar red field L-dwarf population. However, reconciling the HD 206893 B spectra with even those of the reddest low-gravity L-dwarf spectra still requires the contribution of additional atmospheric dust, potentially due to the debris disk environment in which the companion resides. Orbit fitting from four years of astrometric monitoring is consistent with a $\sim$30-year period, orbital inclination of 147$^{\circ}$, and semimajor axis of 10 au, well within the estimated disk inner radius of $\sim$50 au. As one of very few substellar companions imaged interior to a circumstellar disk, the properties of this system offer important dynamical constraints on companion-disk interaction and provide a benchmark for substellar and planetary atmospheric study., Accepted for publication in AJ (October 15, 2020). 35 pages, 20 figures, with tables and appendices presented in their entirety

We show that background fringe-pattern subtraction is a useful technique for removing static noise from off-axis holographic reconstructions and can enhance image contrast in volumetric reconstructions by an order of magnitude in the case for instruments with relatively stable fringes. We demonstrate the fundamental principle of this technique and introduce some practical considerations that must be made when implementing this scheme, such as quantifying fringe stability. This work also shows an experimental verification of the background fringe subtraction scheme using various biological samples.

This is the first of two articles on the Extant Life Volumetric Imaging System (ELVIS) describing a combined digital holographic microscope (DHM) and a fluorescence light-field microscope (FLFM). The instrument is modular and robust enough for field use. Each mode uses its own illumination source and camera, but both microscopes share a common objective lens and sample viewing chamber. This allows correlative volumetric imaging in amplitude, quantitative phase, and fluorescence modes. A detailed schematic and parts list is presented, as well as links to open-source software packages for data acquisition and analysis that permits interested researchers to duplicate the design. Instrument performance is quantified using test targets and beads. In the second article on ELVIS, to be published in the next issue of Microscopy Today, analysis of data from field tests and images of microorganisms will be presented.

We present a study of the HD 165054 astrometric calibration field that has been periodically observed with the Gemini Planet Imager. HD 165054 is a bright star within Baade's Window, a region of the galactic plane with relatively low extinction from interstellar dust. HD 165054 was selected as a calibrator target due to the high number density of stars within this region ($\sim 3$ stars per square arcsecond with $H, 25 pages, 12 figures

Digital holographic microscopy provides the ability to observe throughout a volume that is large compared to its resolution element without the need to refocus through the volume. This capability enables simultaneous observations of large numbers of small objects within such a volume. We have constructed a microscope that can observe a volume 0.4 x 0.4 x 1.0 μm with submicrometer resolution for observation of microorganisms and minerals in liquid environments in earth and on potential planetary missions. Because environmental samples are likely to contain mixtures of inorganics and microorganisms that are of comparable sizes near the resolution limit of the instrument, discrimination of living and non-living objects may be difficult. The motion of motile organisms can be used to readily distinguish them from non-motile objects (live or inorganic), but additional methods are required to distinguish non-motile organisms and inorganic objects that are of comparable size but different composition and structure. In this paper we evaluate the use of passive motion to make this discrimination by evaluating diffusion and buoyancy characteristics of objects in the field of view.

We present a revision to the astrometric calibration of the Gemini Planet Imager (GPI), an instrument designed to achieve the high contrast at small angular separations necessary to image substellar and planetary-mass companions around nearby, young stars. We identified several issues with the GPI Data Reduction Pipeline (DRP) that significantly affected the determination of angle of north in reduced GPI images. As well as introducing a small error in position angle measurements for targets observed at small zenith distances, this error led to a significant error in the previous astrometric calibration that has affected all subsequent astrometric measurements. We present a detailed description of these issues, and how they were corrected. We reduced GPI observations of calibration binaries taken periodically since the instrument was commissioned in 2014 using an updated version of the DRP. These measurements were compared to observations obtained with the NIRC2 instrument on Keck II, an instrument with an excellent astrometric calibration, allowing us to derive an updated plate scale and north offset angle for GPI. This revised astrometric calibration should be used to calibrate all measurements obtained with GPI for the purposes of precision astrometry., Comment: 36 pages, 17 figures, accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems. Updated version includes revisions made during the referee process

Future space telescopes with coronagraph instruments will use a wavefront sensor (WFS) to measure and correct for phase errors and stabilize the stellar intensity in high-contrast images. The HabEx and LUVOIR mission concepts baseline a Zernike wavefront sensor (ZWFS), which uses Zernike's phase contrast method to convert phase in the pupil into intensity at the WFS detector. In preparation for these potential future missions, we experimentally demonstrate a ZWFS in a coronagraph instrument on the Decadal Survey Testbed in the High Contrast Imaging Testbed facility at NASA's Jet Propulsion Laboratory. We validate that the ZWFS can measure low- and mid-spatial frequency aberrations up to the control limit of the deformable mirror, with surface height sensitivity as small as 1 pm, using a configuration similar to the HabEx and LUVOIR concepts. Furthermore, we demonstrate closed-loop control, resolving an individual DM actuator, with residuals consistent with theoretical models. In addition, we predict the expected performance of a ZWFS on future space telescopes using natural starlight from a variety of spectral types. The most challenging scenarios require ~1 hr of integration time to achieve picometer sensitivity. This timescale may be drastically reduced by using internal or external laser sources for sensing purposes. The experimental results and theoretical predictions presented here advance the WFS technology in the context of the next generation of space telescopes with coronagraph instruments., Comment: Accepted for publication in JATIS

We present a revision to the visual orbit of the young, directly-imaged exoplanet 51 Eridani b using four years of observations with the Gemini Planet Imager. The relative astrometry is consistent with an eccentric ($e=0.53_{-0.13}^{+0.09}$) orbit at an intermediate inclination ($i=136_{-11}^{+10}$\,deg), although circular orbits cannot be excluded due to the complex shape of the multidimensional posterior distribution. We find a semi-major axis of $11.1_{-1.3}^{+4.2}$\,au and a period of $28.1_{-4.9}^{+17.2}$\,yr, assuming a mass of 1.75\,M$_{\odot}$ for the host star. We find consistent values with a recent analysis of VLT/SPHERE data covering a similar baseline. We investigated the potential of using absolute astrometry of the host star to obtain a dynamical mass constraint for the planet. The astrometric acceleration of 51~Eri derived from a comparison of the {\it Hipparcos} and {\it Gaia} catalogues was found to be inconsistent at the 2--3$\sigma$ level with the predicted reflex motion induced by the orbiting planet. Potential sources of this inconsistency include a combination of random and systematic errors between the two astrometric catalogs or the signature of an additional companion within the system interior to current detection limits. We also explored the potential of using {\it Gaia} astrometry alone for a dynamical mass measurement of the planet by simulating {\it Gaia} measurements of the motion of the photocenter of the system over the course of the extended eight-year mission. We find that such a measurement is only possible ($>98$\% probability) given the most optimistic predictions for the {\it Gaia} scan astrometric uncertainties for bright stars, and a high mass for the planet ($\gtrsim3.6$\,M$_{\rm Jup}$)., Comment: 17 pages, 11 figures. Accepted for publication in the Astronomical Journal

Using the Keck Planet Imager and Characterizer (KPIC), we obtained high-resolution (R$\sim$35,000) $K$-band spectra of the four planets orbiting HR 8799. We clearly detected \water{} and CO in the atmospheres of HR 8799 c, d, and e, and tentatively detected a combination of CO and \water{} in b. These are the most challenging directly imaged exoplanets that have been observed at high spectral resolution to date when considering both their angular separations and flux ratios. We developed a forward modeling framework that allows us to jointly fit the spectra of the planets and the diffracted starlight simultaneously in a likelihood-based approach and obtained posterior probabilities on their effective temperatures, surface gravities, radial velocities, and spins. We measured $v\sin(i)$ values of $10.1^{+2.8}_{-2.7}$~km/s for HR 8799 d and $15.0^{+2.3}_{-2.6}$~km/s for HR 8799 e, and placed an upper limit of $< 14$~km/s of HR 8799 c. Under two different assumptions of their obliquities, we found tentative evidence that rotation velocity is anti-correlated with companion mass, which could indicate that magnetic braking with a circumplanetary disk at early times is less efficient at spinning down lower mass planets., 31 pages, 12 figures, Accepted to AJ

The $\sim500$\, Myr A2IV star HR 1645 has one of the most significant low-amplitude accelerations of nearby early-type stars measured from a comparison of the {\it Hipparcos} and {\it Gaia} astrometric catalogues. This signal is consistent with either a stellar companion with a moderate mass ratio ($q\sim0.5$) on a short period ($P, 14 pages, 9 figures. Accepted for publication in the Astronomical Journal

We have obtained Hubble Space Telescope STIS and NICMOS, and Gemini/GPI scattered light images of the HD 191089 debris disk. We identify two spatial components: a ring resembling Kuiper Belt in radial extent (FWHM: ${\sim}$25 au, centered at ${\sim}$46 au), and a halo extending to ${\sim}$640 au. We find that the halo is significantly bluer than the ring, consistent with the scenario that the ring serves as the "birth ring" for the smaller dust in the halo. We measure the scattering phase functions in the 30{\deg}-150{\deg} scattering angle range and find the halo dust is both more forward- and backward-scattering than the ring dust. We measure a surface density power law index of -0.68${\pm}$0.04 for the halo, which indicates the slow-down of the radial outward motion of the dust. Using radiative transfer modeling, we attempt to simultaneously reproduce the (visible) total and (near-infrared) polarized intensity images of the birth ring. Our modeling leads to mutually inconsistent results, indicating that more complex models, such as the inclusion of more realistic aggregate particles, are needed., Comment: 29 pages, 18 figures, ApJ accepted

Multiwavelength digital holographic microscopy (DHM) has been used to improve phase reconstructions of digital holograms by reducing 2π phase ambiguities. However, most samples used as test images have been solid or adhered to a surface, making it easy to determine focal planes and correct for chromatic aberration. In this study we apply 3-wavelength off-axis DHM to swimming protozoa containing distinct spectral features such as chlorophyll and carotenoids. We reconstruct the holograms into amplitude and phase images using the angular spectrum method. Methods for noise subtraction, chromatic aberration correction, and image registration are presented for both amplitude and phase. Approaches to phase unwrapping are evaluated and compared to expected results from simulated holograms. The algorithms used are implemented in plug-ins using the open source Fiji platform and are available for use, significantly expanding the open-source software available for DHM.

The Gemini Planet Imager (GPI) contains a 10-hole non-redundant mask (NRM), enabling interferometric resolution in complement to its coronagraphic capabilities. The NRM operates both in spectroscopic (integral field spectrograph, henceforth IFS) and polarimetric configurations. NRM observations were taken between 2013 and 2016 to characterize its performance. Most observations were taken in spectroscopic mode with the goal of obtaining precise astrometry and spectroscopy of faint companions to bright stars. We find a clear correlation between residual wavefront error measured by the AO system and the contrast sensitivity by comparing phase errors in observations of the same source, taken on different dates. We find a typical 5-$\sigma$ contrast sensitivity of $2-3~\times~10^{-3}$ at $\sim\lambda/D$. We explore the accuracy of spectral extraction of secondary components of binary systems by recovering the signal from a simulated source injected into several datasets. We outline data reduction procedures unique to GPI's IFS and describe a newly public data pipeline used for the presented analyses. We demonstrate recovery of astrometry and spectroscopy of two known companions to HR 2690 and HD 142527. NRM+polarimetry observations achieve differential visibility precision of $\sigma\sim0.4\%$ in the best case. We discuss its limitations on Gemini-S/GPI for resolving inner regions of protoplanetary disks and prospects for future upgrades. We summarize lessons learned in observing with NRM in spectroscopic and polarimetric modes., Comment: Accepted to AJ, 22 pages, 14 figures

With the exception of the transit method employed by the Kepler Space Telescope, the radial velocity (RV)technique has proven to be the most fruitful exoplanet detection method to date. High precision measurements with state-of-the-art equipment have achieved RV precision on the order of 0.5 m s−1. Given that Earth's induced RV on the sun is on the order of 10 cm s−1, this regime represents the next milestone on the path to finding Earth-like planets orbiting distant stars. We describe the Vacuum Extreme Radial Velocity Experiment (VERVE), a single mode fiber-fed high-resolution echelle spectrometer which integrates interferometry with spectroscopy with the aim of achieving RV precision at the 10 cm s−1 level, on par with the ESPRESSO spectrograph (Pepe et al., 2014 [1]). The addition of interferometry relaxes the spectral calibration requirement by several orders of magnitude. We detail the spectral calibration of VERVE, including the development of a precise forward model and a data reduction pipeline to facilitate spectral extraction. We examine the model's agreement with the spectra of various calibration sources and present the results of spectral extractions performed on 635 nm and 780 nm laser sources to demonstrate VERVE's spectroscopic capabilities. We note the 10 cm s−1 RV precision threshold for detecting Earth-like planets, and show that the ~ 2 pixel agreement we achieve is consistent with this requirement. We briefly introduce results pertaining to interferometry and conclude by describing the future stages of testing to prepare VERVE for novel RV measurements.

Optical microscopy is one of the key technologies needed for detection of extant life on other solar system bodies. Microscopic images can be used to identify the presence of cell-like objects and discriminate probable cells from other abiotic particles of similar scale through observations of morphology. Image sequences can be used to determine particle density through observation of Brownian motion, enabling discrimination of liquid-filled vesicles from solid mineral grains; non- Brownian motion that is also inconsistent with background flow can also indicate biotic particles. Phase-sensitive imaging modes allow measurement of index of refraction and can be used to image transparent cells that might otherwise require the addition of stains. Because of the likely limited energy available for replication on the moons of Jupiter and Saturn, potential unicellular life would likely be present only at very low concentrations requiring a search through substantial volumes of material at very high resolution. We have been developing digital holographic microscopes (DHM) that addresses the need for high resolution search at low concentrations. Our DHM designs provide both the sub micrometer resolution necessary to detect the smallest forms of life and the high throughput needed to do so at very low concentrations. A significant feature of the holographic recording is that all objects in a large volume can be recorded simultaneously, without the need for focus or tracking to image individual objects. We have demonstrated two promising DHM architectures for possible use in potential future life detection missions - one using conventional optics and one using gradient index optics in a “lensless” arrangement. We compare the two designs, their trade spaces, and the features that might make each preferable for specific applications.

Spectral properties of living organism can provide a discriminating method for characterization. However, digital holographic microscopy (DHM), a high-resolution, volumetric imaging technique that is well-suited for examining microbial species is typically monochromatic. Thus, the spectral properties of bacteria are not probed with DHM save only for the wavelength of operation. Here we describe a new DHM instrument which enhances the method via the simultaneous recording of wavelength multiplexed holograms of the sample. This coarse spectral encoding is akin to labeling with RGB values, thereby producing colorized images of the species which enables a new dimension of characterization. This new instrument is derived from a previous architecture which has already demonstrated superior opto/mechanical stability. Herein, this novel instrument is described, and the results of experimental measurements taken with this new instrument are shown.

Precision optical wavefront metrology is crucial in a range of areas, including direct imaging of exoplanets. Although ground-based systems have reached high sensitivities, systems that are suitable for space use using stellar photons for sensing are lacking. In work published this year, we have developed a robust phase reconstruction expression that allows very accurate measurement of small phase changes at the highest spatial frequencies possible, targeting very small signals to demonstrate its applicability for space-based high-contrast missions

We present the first polarimetric detection of the inner disk component around the pre-main sequence B9.5 star HD 141569A. Gemini Planet Imager H-band (1.65 micron) polarimetric differential imaging reveals the highest signal-to-noise ratio detection of this ring yet attained and traces structure inwards to 0.25" (28 AU at a distance of 111 pc). The radial polarized intensity image shows the east side of the disk, peaking in intensity at 0.40" (44 AU) and extending out to 0.9" (100 AU). There is a spiral arm-like enhancement to the south, reminiscent of the known spiral structures on the outer rings of the disk. The location of the spiral arm is coincident with 12CO J=3-2 emission detected by ALMA, and hints at a dynamically active inner circumstellar region. Our observations also show a portion of the middle dusty ring at ~220 AU known from previous observations of this system. We fit the polarized H-band emission with a continuum radiative transfer Mie model. Our best-fit model favors an optically thin disk with a minimum dust grain size close to the blow-out size for this system: evidence of on-going dust production in the inner reaches of the disk. The thermal emission from this model accounts for virtually all of the far-infrared and millimeter flux from the entire HD 141569A disk, in agreement with the lack of ALMA continuum and CO emission beyond ~100 AU. A remaining 8-30 micron thermal excess a factor of ~2 above our model argues for a yet-unresolved warm innermost 5-15 AU component of the disk., 16 pages, 8 figures, accepted at AJ

We present the first spatially resolved scattered-light images of four debris disks around members of the Scorpius-Centaurus (Sco-Cen) OB Association with high-contrast imaging and polarimetry using the Gemini Planet Imager (GPI). All four disks are resolved for the first time in polarized light and one disk is also detected in total intensity. The three disks imaged around HD 111161, HD 143675, and HD 145560 are symmetric in both morphology and brightness distribution. The three systems span a range of inclinations and radial extents. The disk imaged around HD 98363 shows indications of asymmetries in morphology and brightness distribution, with some structural similarities to the HD 106906 planet-disk system. Uniquely, HD 98363 has a wide co-moving stellar companion Wray 15-788 with a recently resolved disk with very different morphological properties. HD 98363 A/B is the first binary debris disk system with two spatially resolved disks. All four targets have been observed with ALMA, and their continuum fluxes range from one non-detection to one of the brightest disks in the region. With the new results, a total of 15 A/F-stars in Sco-Cen have resolved scattered light debris disks, and approximately half of these systems exhibit some form of asymmetry. Combining the GPI disk structure results with information from the literature on millimeter fluxes and imaged planets reveals a diversity of disk properties in this young population. Overall, the four newly resolved disks contribute to the census of disk structures measured around A/F-stars at this important stage in the development of planetary systems., Comment: 20 pages, 9 figures

Instrumentation designed to characterize potentially habitable planets may combine adaptive optics and high-resolution spectroscopy techniques to achieve the highest possible sensitivity to spectral signs of life. Detecting the weak signal from a planet containing biomarkers will require exquisite control of the optical wavefront to maximize the planet signal and significantly reduce unwanted starlight. We present an optical technique, known as vortex fiber nulling (VFN), that allows polychromatic light from faint planets at extremely small separations from their host stars ($\lesssim\lambda/D$) to be efficiently routed to a diffraction-limited spectrograph via a single-mode optical fiber, while light from the star is prevented from entering the spectrograph. VFN takes advantage of the spatial selectivity of a single-mode fiber to isolate the light from close-in companions in a small field of view around the star. We provide theoretical performance predictions of a conceptual design and show that VFN may be utilized to characterize planets detected by radial velocity (RV) instruments in the infrared without knowledge of the azimuthal orientation of their orbits. Using a spectral template-matching technique, we calculate an integration time of $\sim$400, $\sim$100, and $\sim$30 hr for Ross 128 b with Keck, the Thirty Meter Telescope (TMT), and the Large Ultraviolet/Optical/Infrared (LUVOIR) Surveyor, respectively., Comment: Accepted for publication in The Astrophysical Journal

We present new high resolution imaging of a light-scattering dust ring and halo around the young star HD 35841. Using spectroscopic and polarimetric data from the Gemini Planet Imager in H-band (1.6 microns), we detect the highly inclined (i=85 deg) ring of debris down to a projected separation of ~12 au (~0.12") for the first time. Optical imaging from HST/STIS shows a smooth dust halo extending outward from the ring to >140 au (>1.4"). We measure the ring's scattering phase function and polarization fraction over scattering angles of 22-125 deg, showing a preference for forward scattering and a polarization fraction that peaks at ~30% near the ansae. Modeling of the scattered-light disk indicates that the ring spans radii of ~60-220 au, has a vertical thickness similar to that of other resolved dust rings, and contains grains as small as 1.5 microns in diameter. These models also suggest the grains have a low porosity, are more likely to consist of carbon than astrosilicates, and contain significant water ice. The halo has a surface brightness profile consistent with that expected from grains pushed by radiation pressure from the main ring onto highly eccentric but still bound orbits. We also briefly investigate arrangements of a possible inner disk component implied by our spectral energy distribution models, and speculate about the limitations of Mie theory for doing detailed analyses of debris disk dust populations., Accepted to AJ. 22 pages, 11 figures, 3 tables

The Optimal Optical CoronagraphWorkshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 30 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. This contribution is the final part of a series of three papers summarizing the outcomes of the workshop, and presents an overview of novel optical technologies and systems that are implemented or considered for high-contrast imaging instruments on both ground-based and space telescopes. The overall objective of high contrast instruments is to provide direct observations and characterizations of exoplanets at contrast levels as extreme as 10^(-10). We list shortcomings of current technologies, and identify opportunities and development paths for new technologies that enable quantum leaps in performance. Specifically, we discuss the design and manufacturing of key components like advanced deformable mirrors and coronagraphic optics, and their amalgamation in "adaptive coronagraph" systems. Moreover, we discuss highly integrated system designs that combine contrast-enhancing techniques and characterization techniques (like high-resolution spectroscopy) while minimizing the overall complexity. Finally, we explore extreme implementations using all-photonics solutions for ground-based telescopes and dedicated huge apertures for space telescopes.

A major science goal of future, large-aperture, optical space telescopes is to directly image and spectroscopically analyze reflected light from potentially habitable exoplanets. To accomplish this, the optical system must suppress diffracted light from the star to reveal point sources approximately ten orders of magnitude fainter than the host star at small angular separation. Coronagraphs with microdot apodizers achieve the theoretical performance needed to image Earth-like planets with a range of possible telescope designs, including those with obscured and segmented pupils. A test microdot apodizer with various bulk patterns (step functions, gradients, and sinusoids) and 4 different dot sizes (3, 5, 7, and 10 $��$m) made of small chrome squares on anti-reflective glass was characterized with microscopy, optical laser interferometry, as well as transmission and reflectance measurements at wavelengths of 600 and 800 nm. Microscopy revealed the microdots were fabricated to high precision. Results from laser interferometry showed that the phase shifts observed in reflection vary with the local microdot fill factor. Transmission measurements showed that microdot fill factor and transmission were linearly related for dot sizes >5 $��$m. However, anomalously high transmittance was measured when the dot size is, Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave

The Optimal Optical Coronagraph (OOC) Workshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this first installment of a series of three papers summarizing the outcomes of the OOC workshop, we present an overview of design methods and optical performance metrics developed for coronagraph instruments. The design and optimization of coronagraphs for future telescopes has progressed rapidly over the past several years in the context of space mission studies for Exo-C, WFIRST, HabEx, and LUVOIR as well as ground-based telescopes. Design tools have been developed at several institutions to optimize a variety of coronagraph mask types. We aim to give a broad overview of the approaches used, examples of their utility, and provide the optimization tools to the community. Though it is clear that the basic function of coronagraphs is to suppress starlight while maintaining light from off-axis sources, our community lacks a general set of standard performance metrics that apply to both detecting and characterizing exoplanets. The attendees of the OOC workshop agreed that it would benefit our community to clearly define quantities for comparing the performance of coronagraph designs and systems. Therefore, we also present a set of metrics that may be applied to theoretical designs, testbeds, and deployed instruments. We show how these quantities may be used to easily relate the basic properties of the optical instrument to the detection significance of the given point source in the presence of realistic noise., To appear in Proceedings of the SPIE, vol. 10698

The Optimal Optical Coronagraph (OOC) Workshop held at the Lorentz Center in September 2017 in Leiden, the Netherlands, gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this second installment of a series of three papers summarizing the outcomes of the OOC workshop, we present an overview of common path wavefront sensing/control and Coherent Differential Imaging techniques, highlight the latest results, and expose their relative strengths and weaknesses. We layout critical milestones for the field with the aim of enhancing future ground/space based high contrast imaging platforms. Techniques like these will help to bridge the daunting contrast gap required to image a terrestrial planet in the zone where it can retain liquid water, in reflected light around a G type star from space.

We explore KLIP forward modeling spectral extraction on Gemini Planet Imager coronagraphic data of HR 8799, using PyKLIP and show algorithm stability with varying KLIP parameters. We report new and re-reduced spectrophotometry of HR 8799 c, d, and e in H & K bands. We discuss a strategy for choosing optimal KLIP PSF subtraction parameters by injecting simulated sources and recovering them over a range of parameters. The K1/K2 spectra for HR 8799 c and d are similar to previously published results from the same dataset. We also present a K band spectrum of HR 8799 e for the first time and show that our H-band spectra agree well with previously published spectra from the VLT/SPHERE instrument. We show that HR 8799 c and d show significant differences in their H & K spectra, but do not find any conclusive differences between d and e or c and e, likely due to large error bars in the recovered spectrum of e. Compared to M, L, and T-type field brown dwarfs, all three planets are most consistent with mid and late L spectral types. All objects are consistent with low gravity but a lack of standard spectra for low gravity limit the ability to fit the best spectral type. We discuss how dedicated modeling efforts can better fit HR 8799 planets' near-IR flux and discuss how differences between the properties of these planets can be further explored., Comment: Accepted to AJ, 25 pages, 16 Figures

Using the Gemini Planet Imager (GPI) located at Gemini South, we measured the near-infrared (1.0-2.4 micron) spectrum of the planetary companion to the nearby, young star $\beta$ Pictoris. We compare the spectrum obtained with currently published model grids and with known substellar objects and present the best matching models as well as the best matching observed objects. Comparing the empirical measurement of the bolometric luminosity to evolutionary models, we find a mass of $12.9\pm0.2$ $\mathcal{M}_\mathrm{Jup}$, an effective temperature of $1724\pm15$ K, a radius of $1.46\pm0.01$ $\mathcal{R}_\mathrm{Jup}$, and a surface gravity of $\log g = 4.18\pm0.01$ [dex] (cgs). The stated uncertainties are statistical errors only, and do not incorporate any uncertainty on the evolutionary models. Using atmospheric models, we find an effective temperature of $1700-1800$ K and a surface gravity of $\log g = 3.5$-$4.0$ [dex] depending upon model. These values agree well with other publications and with "hot-start" predictions from planetary evolution models. Further, we find that the spectrum of $\beta$ Pic b best matches a low-surface gravity L2$\pm$1 brown dwarf. Finally comparing the spectrum to field brown dwarfs we find the the spectrum best matches 2MASS J04062677-381210 and 2MASS J03552337+1133437.

The HR 8799 system uniquely harbors four young super-Jupiters whose orbits can provide insights into the system's dynamical history and constrain the masses of the planets themselves. Using the Gemini Planet Imager (GPI), we obtained down to one milliarcsecond precision on the astrometry of these planets. We assessed four-planet orbit models with different levels of constraints and found that assuming the planets are near 1:2:4:8 period commensurabilities, or are coplanar, does not worsen the fit. We added the prior that the planets must have been stable for the age of the system (40 Myr) by running orbit configurations from our posteriors through $N$-body simulations and varying the masses of the planets. We found that only assuming the planets are both coplanar and near 1:2:4:8 period commensurabilities produces dynamically stable orbits in large quantities. Our posterior of stable coplanar orbits tightly constrains the planets' orbits, and we discuss implications for the outermost planet b shaping the debris disk. A four-planet resonance lock is not necessary for stability up to now. However, planet pairs d and e, and c and d, are each likely locked in two-body resonances for stability if their component masses are above $6~M_{\rm{Jup}}$ and $7~M_{\rm{Jup}}$, respectively. Combining the dynamical and luminosity constraints on the masses using hot-start evolutionary models and a system age of $42 \pm 5$~Myr, we found the mass of planet b to be $5.8 \pm 0.5~M_{\rm{Jup}}$, and the masses of planets c, d, and e to be $7.2_{-0.7}^{+0.6}~M_{\rm{Jup}}$ each., 21 pages, 10 figures, accepted to AJ

We present spectro-photometry spanning 1-5 $\mu$m of 51 Eridani b, a 2-10 M$_\text{Jup}$ planet discovered by the Gemini Planet Imager Exoplanet Survey. In this study, we present new $K1$ (1.90-2.19 $\mu$m) and $K2$ (2.10-2.40 $\mu$m) spectra taken with the Gemini Planet Imager as well as an updated $L_P$ (3.76 $\mu$m) and new $M_S$ (4.67 $\mu$m) photometry from the NIRC2 Narrow camera. The new data were combined with $J$ (1.13-1.35 $\mu$m) and $H$ (1.50-1.80 $\mu$m) spectra from the discovery epoch with the goal of better characterizing the planet properties. 51 Eri b photometry is redder than field brown dwarfs as well as known young T-dwarfs with similar spectral type (between T4-T8) and we propose that 51 Eri b might be in the process of undergoing the transition from L-type to T-type. We used two complementary atmosphere model grids including either deep iron/silicate clouds or sulfide/salt clouds in the photosphere, spanning a range of cloud properties, including fully cloudy, cloud free and patchy/intermediate opacity clouds. Model fits suggest that 51 Eri b has an effective temperature ranging between 605-737 K, a solar metallicity, a surface gravity of $\log$(g) = 3.5-4.0 dex, and the atmosphere requires a patchy cloud atmosphere to model the SED. From the model atmospheres, we infer a luminosity for the planet of -5.83 to -5.93 ($\log L/L_{\odot}$), leaving 51 Eri b in the unique position as being one of the only directly imaged planet consistent with having formed via cold-start scenario. Comparisons of the planet SED against warm-start models indicates that the planet luminosity is best reproduced by a planet formed via core accretion with a core mass between 15 and 127 M$_{\oplus}$., Comment: 27 pages, 19 figures, Accepted for publication in The Astronomical Journal

We present a new matched filter algorithm for direct detection of point sources in the immediate vicinity of bright stars. The stellar Point Spread Function (PSF) is first subtracted using a Karhunen-Lo\'eve Image Processing (KLIP) algorithm with Angular and Spectral Differential Imaging (ADI and SDI). The KLIP-induced distortion of the astrophysical signal is included in the matched filter template by computing a forward model of the PSF at every position in the image. To optimize the performance of the algorithm, we conduct extensive planet injection and recovery tests and tune the exoplanet spectra template and KLIP reduction aggressiveness to maximize the Signal-to-Noise Ratio (SNR) of the recovered planets. We show that only two spectral templates are necessary to recover any young Jovian exoplanets with minimal SNR loss. We also developed a complete pipeline for the automated detection of point source candidates, the calculation of Receiver Operating Characteristics (ROC), false positives based contrast curves, and completeness contours. We process in a uniform manner more than 330 datasets from the Gemini Planet Imager Exoplanet Survey (GPIES) and assess GPI typical sensitivity as a function of the star and the hypothetical companion spectral type. This work allows for the first time a comparison of different detection algorithms at a survey scale accounting for both planet completeness and false positive rate. We show that the new forward model matched filter allows the detection of $50\%$ fainter objects than a conventional cross-correlation technique with a Gaussian PSF template for the same false positive rate., Comment: ApJ accepted

We present H band spectroscopic and Halpha photometric observations of HD 100546 obtained with GPI and MagAO. We detect H band emission at the location of the protoplanet HD 100546b, but show that choice of data processing parameters strongly affects the morphology of this source. It appears point-like in some aggressive reductions, but rejoins an extended disk structure in the majority of the others. Furthermore, we demonstrate that this emission appears stationary on a timescale of 4.6 yrs, inconsistent at the 2sigma level with a Keplerian clockwise orbit at 59 au in the disk plane. The H band spectrum of the emission is inconsistent with any type of low effective temperature object or accreting protoplanetary disk. It strongly suggests a scattered light origin, as it is consistent with the spectrum of the star and the spectra extracted at other locations in the disk. A non detection at the 5sigma level of HD 100546b in differential Halpha imaging places an upper limit, assuming the protoplanet lies in a gap free of extinction, on the accretion luminosity and accretion rate of 1.7E-4 Lsun and MMdot, Accepted to AJ, 10 pages, 6 figures, 1 table

We present optical and near-infrared high contrast images of the transitional disk HD 100546 taken with the Magellan Adaptive Optics system (MagAO) and the Gemini Planet Imager (GPI). GPI data include both polarized intensity and total intensity imagery, and MagAO data are taken in Simultaneous Differential Imaging mode at H{\alpha}. The new GPI H -band total intensity data represent a significant enhancement in sensitivity and field rotation compared to previous data sets and enable a detailed exploration of substructure in the disk. The data are processed with a variety of differential imaging techniques (polarized, angular, reference, and simultaneous differential imaging) in an attempt to identify the disk structures that are most consistent across wavelengths, processing techniques, and algorithmic parameters. The inner disk cavity at 15 au is clearly resolved in multiple datasets, as are a variety of spiral features. While the cavity and spiral structures are identified at levels significantly distinct from the neighboring regions of the disk under several algorithms and with a range of algorithmic parameters, emission at the location of HD 100546 c varies from point-like under aggressive algorithmic parameters to a smooth continuous structure with conservative parameters, and is consistent with disk emission. Features identified in the HD100546 disk bear qualitative similarity to computational models of a moderately inclined two-armed spiral disk, where projection effects and wrapping of the spiral arms around the star result in a number of truncated spiral features in forward-modeled images., Comment: accepted to AJ

We present new observations of the low-mass companion to HD 984 taken with the Gemini Planet Imager as a part of the Gemini Planet Imager Exoplanet Survey campaign. Images of HD 984 B were obtained in the J (1.12--1.3 micron) and H (1.50--1.80 micron) bands. Combined with archival epochs from 2012 and 2014, we fit the first orbit to the companion to find an 18 AU (70 year) orbit with a 68% confidence interval between 14 and 28 AU, an eccentricity of 0.18 with a 68% confidence interval between 0.05 and 0.47, and an inclination of 119 degrees with a 68% confidence interval between 114 degrees and 125 degrees. To address considerable spectral covariance in both spectra, we present a method of splitting the spectra into low and high frequencies to analyze the spectral structure at different spatial frequencies with the proper spectral noise correlation. Using the split spectra, we compare to known spectral types using field brown dwarf and low-mass star spectra and find a best fit match of a field gravity M6.5+/-1.5 spectral type with a corresponding temperature of 2730+120 K. Photometry of the companion yields a luminosity of log(L_bol/L_sun) = -2.88+/-0.07 dex, using DUSTY models. Mass estimates, again from DUSTY models, find an age-dependent mass of 34+/-1 to 95+/-4 M_Jup. These results are consistent with previous measurements of the object., Comment: Accepted for publication in The Astronomical Journal

We present evidence that the recently discovered, directly-imaged planet HD 131399 Ab is a background star with non-zero proper motion. From new JHK1L' photometry and spectroscopy obtained with the Gemini Planet Imager, VLT/SPHERE, and Keck/NIRC2, and a reanalysis of the discovery data obtained with VLT/SPHERE, we derive colors, spectra, and astrometry for HD 131399 Ab. The broader wavelength coverage and higher data quality allow us to re-investigate its status. Its near-infrared spectral energy distribution excludes spectral types later than L0 and is consistent with a K or M dwarf, which are the most likely candidates for a background object in this direction at the apparent magnitude observed. If it were a physically associated object, the projected velocity of HD 131399 Ab would exceed escape velocity given the mass and distance to HD 131399 A. We show that HD 131399 Ab is also not following the expected track for a stationary background star at infinite distance. Solving for the proper motion and parallax required to explain the relative motion of HD 131399 Ab, we find a proper motion of 12.3 mas/yr. When compared to predicted background objects drawn from a galactic model, we find this proper motion to be high, but consistent with the top 4% fastest-moving background stars. From our analysis we conclude that HD 131399 Ab is a background K or M dwarf., 35 pages, 20 figures, Published in AJ

We present new spatially resolved astrometry and photometry from the Gemini Planet Imager of the inner binary of the young multiple star system V343 Normae, which is a member of the beta Pictoris moving group. V343 Normae comprises a K0 and mid-M star in a ~4.5 year orbit (AaAb) and a wide 10" M5 companion (B). By combining these data with archival astrometry and radial velocities we fit the orbit and measure individual masses for both components of M_Aa = 1.10 +/- 0.10 M_sun and M_Ab = 0.290 +/- 0.018 M_sun. Comparing to theoretical isochrones, we find good agreement for the measured masses and JHK band magnitudes of the two components consistent with the age of the beta Pic moving group. We derive a model-dependent age for the beta Pic moving group of 26 +/- 3 Myr by combining our results for V343 Normae with literature measurements for GJ 3305, which is another group member with resolved binary components and dynamical masses., Comment: 12 pages, 7 figures. Accepted to AJ

We present $H$-band near-infrared polarimetric imaging observations of the F5V star HD~157587 obtained with the Gemini Planet Imager (GPI) that reveal the debris disk as a bright ring structure at a separation of $\sim$80$-$100~AU. The new GPI data complement recent HST/STIS observations that show the disk extending out to over 500~AU. The GPI image displays a strong asymmetry along the projected minor axis as well as a fainter asymmetry along the projected major axis. We associate the minor and major axis asymmetries with polarized forward scattering and a possible stellocentric offset, respectively. To constrain the disk geometry we fit two separate disk models to the polarized image, each using a different scattering phase function. Both models favor a disk inclination of $\sim 70\degr$ and a $1.5\pm0.6$ AU stellar offset in the plane of the sky along the projected major axis of the disk. We find that the stellar offset in the disk plane, perpendicular to the projected major axis is degenerate with the form of the scattering phase function and remains poorly constrained. The disk is not recovered in total intensity due in part to strong adaptive optics residuals, but we recover three point sources. Considering the system's proximity to the galactic plane and the point sources' positions relative to the disk, we consider it likely that they are background objects and unrelated to the disk's offset from the star., Comment: Updated with proper references

We present the discovery of a brown dwarf companion to the debris disk host star HR 2562. This object, discovered with the Gemini Planet Imager (GPI), has a projected separation of 20.3$\pm$0.3 au (0.618$\pm$0.004") from the star. With the high astrometric precision afforded by GPI, we have confirmed common proper motion of HR 2562B with the star with only a month time baseline between observations to more than $5\sigma$. Spectral data in $J$, $H$, and $K$ bands show morphological similarity to L/T transition objects. We assign a spectral type of L7$\pm$3 to HR 2562B, and derive a luminosity of $\log$(L$_{\rm bol}$/L$_{\odot}$)=-4.62$\pm$0.12, corresponding to a mass of 30$\pm$15 M$_{\rm Jup}$ from evolutionary models at an estimated age of the system of 300-900 Myr. Although the uncertainty in the age of the host star is significant, the spectra and photometry exhibit several indications of youth for HR 2562B. The source has a position angle consistent with an orbit in the same plane as the debris disk recently resolved with Herschel. Additionally, it appears to be interior to the debris disk. Though the extent of the inner hole is currently too uncertain to place limits on the mass of HR 2562B, future observations of the disk with higher spatial resolution may be able to provide mass constraints. This is the first brown dwarf-mass object found to reside in the inner hole of a debris disk, offering the opportunity to search for evidence of formation above the deuterium burning limit in a circumstellar disk., Comment: 10 pages, 4 figures. Accepted for publication in ApJ Letters

ZWFS is known to be photon noise optimal for measuring low order aberrations. Recently, ZWFS was selected as the baseline LOWFS technology on WFIRST for its sensitivity, accuracy, and its ease of integration with the starlight rejection mask. In this paper, we present the development of ZWFS sensor, including the algorithm description, sensitivity analysis, and some early experimental model validation results from a fabricated ZWFS phase mask on a standalone LOWFS testbed.

A novel active mirror technology based on carbon fiber reinforced polymer (CFRP) substrates and replication techniques has been developed. Multiple additional layers are implemented into the design serving various functions. Nanolaminate metal films are used to provide a high quality reflective front surface. A backing layer of thin active material is implemented to provide the surface-parallel actuation scheme. Printed electronics are used to create a custom electrode pattern and flexible routing layer. Mirrors of this design are thin (< 1.0 mm), lightweight (2.7 kg/m^2), and have large actuation capabilities. These capabilities, along with the associated manufacturing processes, represent a significant change in design compared to traditional optics. Such mirrors could be used as lightweight primaries for small CubeSat-based telescopes or as meter-class segments for future large aperture observatories. Multiple mirrors can be produced under identical conditions enabling a substantial reduction in manufacturing cost and complexity. An overview of the mirror design and manufacturing processes is presented. Predictions on the actuation performance have been made through finite element simulations demonstrating correctabilities on the order of 250-300× for astigmatic modes with only 41 independent actuators. A description of the custom metrology system used to characterize the active mirrors is also presented. The system is based on a Reverse Hartmann test and can accommodate extremely large deviations in mirror figure (> 100 μm PV) down to sub-micron precision. The system has been validated against several traditional techniques including photogrammetry and interferometry. The mirror performance has been characterized using this system, as well as closed-loop figure correction experiments on 150 mm dia. prototypes. The mirrors have demonstrated post-correction figure accuracies of 200 nm RMS (two dead actuators limiting performance).

A principal scientific goal of the Gemini Planet Imager (GPI) is obtaining milliarcsecond astrometry to constrain exoplanet orbits. However, astrometry of directly imaged exoplanets is subject to biases, systematic errors, and speckle noise. Here we describe an analytical procedure to forward model the signal of an exoplanet that accounts for both the observing strategy (angular and spectral differential imaging) and the data reduction method (Karhunen-Lo\`eve Image Projection algorithm). We use this forward model to measure the position of an exoplanet in a Bayesian framework employing Gaussian processes and Markov chain Monte Carlo (MCMC) to account for correlated noise. In the case of GPI data on $\beta$ Pic b, this technique, which we call Bayesian KLIP-FM Astrometry (BKA), outperforms previous techniques and yields 1$\sigma$-errors at or below the one milliarcsecond level. We validate BKA by fitting a Keplerian orbit to twelve GPI observations along with previous astrometry from other instruments. The statistical properties of the residuals confirm that BKA is accurate and correctly estimates astrometric errors. Our constraints on the orbit of $\beta$ Pic b firmly rule out the possibility of a transit of the planet at 10-$\sigma$ significance. However, we confirm that the Hill sphere of $\beta$ Pic b will transit, giving us a rare chance to probe the circumplanetary environment of a young, evolving exoplanet. We provide an ephemeris for photometric monitoring of the Hill sphere transit event, which will begin at the start of April in 2017 and finish at the end of January in 2018., Comment: 18 pages, 7 figures. Accepted to AJ. v2 corrects an error in plotting the full size of the Hill sphere in Figure 6

Detecting polarized light from self-luminous exoplanets has the potential to provide key information about rotation, surface gravity, cloud grain size, and cloud coverage. While field brown dwarfs with detected polarized emission are common, no exoplanet or substellar companion has yet been detected in polarized light. With the advent of high contrast imaging spectro-polarimeters such as GPI and SPHERE, such a detection may now be possible with careful treatment of instrumental polarization. In this paper, we present 28 minutes of $H$-band GPI polarimetric observations of the benchmark T5.5 companion HD 19467 B. We detect no polarization signal from the target, and place an upper limit on the degree of linear polarization of $p_{\text{CL}99.73\%} \leq 2.4\%$. We discuss our results in the context of T dwarf cloud models and photometric variability., Comment: 14 pages, 3 figures, 2 tables. Accepted to ApJ

Understanding when, how, and if bacteria swim is key to understanding critical ecological and biological processes, from carbon cycling to infection. Imaging motility by traditional light microscopy is limited by focus depth, requiring cells to be constrained in z. Holographic microscopy offers an instantaneous 3D snapshot of a large sample volume, and is therefore ideal in principle for quantifying unconstrained bacterial motility. However, resolving and tracking individual cells is difficult due to the low amplitude and phase contrast of the cells; the index of refraction of typical bacteria differs from that of water only at the second decimal place. In this work we present a combination of optical and sample-handling approaches to facilitating bacterial tracking by holographic phase imaging. The first is the design of the microscope, which is an off-axis design with the optics along a common path, which minimizes alignment issues while providing all of the advantages of off-axis holography. Second, we use anti-reflective coated etalon glass in the design of sample chambers, which reduce internal reflections. Improvement seen with the antireflective coating is seen primarily in phase imaging, and its quantification is presented here. Finally, dyes may be used to increase phase contrast according to the Kramers-Kronig relations. Results using three test strains are presented, illustrating the different types of bacterial motility characterized by an enteric organism (Escherichia coli), an environmental organism (Bacillus subtilis), and a marine organism (Vibrio alginolyticus). Data processing steps to increase the quality of the phase images and facilitate tracking are also discussed.

Given that low-mass stars have intrinsically low luminosities at optical wavelengths and a propensity for stellar activity, it is advantageous for radial velocity (RV) surveys of these objects to use near-infrared (NIR) wavelengths. In this work we describe and test a novel RV extraction pipeline dedicated to retrieving RVs from low mass stars using NIR spectra taken by the CSHELL spectrograph at the NASA Infrared Telescope Facility, where a methane isotopologue gas cell is used for wavelength calibration. The pipeline minimizes the residuals between the observations and a spectral model composed of templates for the target star, the gas cell, and atmospheric telluric absorption; models of the line spread function, continuum curvature, and sinusoidal fringing; and a parameterization of the wavelength solution. The stellar template is derived iteratively from the science observations themselves without a need for separate observations dedicated to retrieving it. Despite limitations from CSHELL's narrow wavelength range and instrumental systematics, we are able to (1) obtain an RV precision of 35 m/s for the RV standard star GJ 15 A over a time baseline of 817 days, reaching the photon noise limit for our attained SNR, (2) achieve ~3 m/s RV precision for the M giant SV Peg over a baseline of several days and confirm its long-term RV trend due to stellar pulsations, as well as obtain nightly noise floors of ~2 - 6 m/s, and (3) show that our data are consistent with the known masses, periods, and orbital eccentricities of the two most massive planets orbiting GJ 876. Future applications of our pipeline to RV surveys using the next generation of NIR spectrographs, such as iSHELL, will enable the potential detection of Super-Earths and Mini-Neptunes in the habitable zones of M dwarfs., Comment: 64 pages, 28 figures, 5 tables. Accepted for publication in PASP

We present a direct image of the innermost companion to the red giant delta Andromedae using the Stellar Double Coronagraph at the Palomar Observatory. We use a Markov chain Monte Carlo based algorithm to simultaneously reduce the data and perform astrometry and photometry of the companion. We determine that the companion is most likely a main-sequence K-type star and is certainly not the previously hypothesized white dwarf., ApJ, accepted. 10 pages, 3 figures

We present the first results from the polarimetry mode of the Gemini Planet Imager (GPI), which uses a new integral field polarimetry architecture to provide high contrast linear polarimetry with minimal systematic biases between the orthogonal polarizations. We describe the design, data reduction methods, and performance of polarimetry with GPI. Point spread function subtraction via differential polarimetry suppresses unpolarized starlight by a factor of over 100, and provides sensitivity to circumstellar dust reaching the photon noise limit for these observations. In the case of the circumstellar disk around HR 4796A, GPI's advanced adaptive optics system reveals the disk clearly even prior to PSF subtraction. In polarized light, the disk is seen all the way in to its semi-minor axis for the first time. The disk exhibits surprisingly strong asymmetry in polarized intensity, with the west side >9 times brighter than the east side despite the fact that the east side is slightly brighter in total intensity. Based on a synthesis of the total and polarized intensities, we now believe that the west side is closer to us, contrary to most prior interpretations. Forward scattering by relatively large silicate dust particles leads to the strong polarized intensity on the west side, and the ring must be slightly optically thick in order to explain the lower brightness in total intensity there. These findings suggest that the ring is geometrically narrow and dynamically cold, perhaps shepherded by larger bodies in the same manner as Saturn's F ring., 27 pages, 16 figures, submitted to the Astrophysical Journal. A version with full resolution figures is available at http://www.stsci.edu/~mperrin/papers/gpi_polarimetry_and_HR_4796A.pdf

We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spread function make high-contrast imaging more challenging. In particular the testbed will be compatible with both AFTA-like and ATLAST-like aperture shapes, respectively on-axis monolithic, and on-axis segmented telescopes. The testbed optical design was developed using a novel approach to define the layout and surface error requirements to minimize amplitude­ induced errors at the target contrast level performance. In this communication we compare the as-built surface errors for each optic to their specifications based on end-to-end Fresnel modelling of the testbed. We also report on the testbed optical and optomechanical alignment performance, coronagraph design and manufacturing, and preliminary first light results.