Search

Three new double corundum derived compounds, Fe3-xInSnxO6, (x = 0. 0.25, 0.5) were synthesized at high pressure and temperature (6 GPa, 1400-1450 C) All the compounds order antiferromagnetically well above room temperature, TN = 608 K, 532K, and 432 K for x = 0, 0.25, 0.5, respectively. The x = 0 phase crystalizes as centrosymmetric R3c, but increasing the substitution of closed-shell d10 Sn4+ induces x = 0.25 and 0.5 to crystallize as noncentrosymmetric R3c. Microprobe measurements indicate that for x = 0.25, 0.5, the substitution of Sn4+ is not compensated for by vacancies, which implies the presence of Fe2+, as corroborated by X-ray absorption near edge spectroscopy and single crystal X-ray structure refinements. Neutron powder diffraction experiments on x = 0.5 indicate that, these compounds are canted A-type antiferromagnets which, like Fe2O3 and InFeO3, consist of ferromagnetic layers that stack antiferromagnetically with a single magnetic transition. Weak ferromagnetic interactions persist to very high temperatures. Temperature dependent second harmonic generation measurements on x = 0.25 and 0.5 show SHG response with ferroelectric-like hysteretic maxima that correspond with the respective magnetic transitions, which suggest coupling of the magnetic and polarization order. These new compounds provide more information on fine-tuning the electronic, magnetic and structural properties of corundum derived mutlferroics in the search for tunable high temperature magnetoelectric materials.

SnS-Ti/TiO2photoanode for anticancer drug degradation.

Geometrically frustrated lattices combined with magnetism usually host quantum fluctuations that suppress magnetic orders and generate highly entangled ground states. Three-dimensionally (3D) frustrated magnets generally exist in the diamond and pyrochlore lattices, while two-dimensionally (2D) frustrated geometries contain Kagomé, triangular, and honeycomb lattices. In this work, we reported using chemical pressure to tune the magnetism of the pyrochlore lattice in LiYbSe

In this work, glass-ceramics in the xBeO–20Fe2O3–(80-x)TeO2 system with x = 0–25 mol% were synthesized by the traditional melt quenching route and studied by inductively coupled plasma optical emission spectroscopy, X-ray diffraction, confocal microscopy, infrared and Raman spectroscopy. BeO addition was found to support the crystallization process of Fe2O3 during melting, and an increased BeO content was associated with an increased fraction of the crystalline Fe2O3 phase and an increased size of these crystallites. Furthermore, samples doped with BeO exhibit an increasing polymerization of the residual tellurite glass network compared to the undoped sample. The magnetic properties and specific heat of all synthesized materials were measured, and the results show that all studied samples behave as spin-glasses. Also, the Morin transition of hematite was observed at 260 K with intensity depending on the material content in Fe2O3 crystalline phase, the formation of which correlates with the amount of added BeO.

Based on previous reports on the optical microscopy contrast of mechanically exfoliated few layer CrCl 3 transferred on 285 nm and 270 nm SiO 2 on Si(100), we focus on the experimental determination of an effective mean complex refractive index via a fitting analysis based on the Fresnel equations formalism. Accordingly, the layer and wavelength-dependent absorbance and reflectance are calculated. Layer and wavelength-dependent optical contrast curves are then evaluated demonstrating that the contrast is significantly high only around well-defined wavelength bands. This is validated a posteriori, by experimental UV-Vis absorbance data. The present study aims to show the way towards the most reliable determination of thickness of the 2D material flakes during exfoliation.

Novel highly-oriented (111)-textured boron-doped diamond electrodes (BDDD) featuring high electrochemical activity and electrode stability toward electrochemical analytics were fabricated by deuterium-rich microwave plasma CVD. The high flux deuterium plasma-induced preferential formation of (111)-faceted diamond as revealed by XRD. The highly-oriented diamond surface exhibited improved boron dopant incorporation and activation, whereas the crystals showed enhanced carrier electron acceptance and donation, which accelerated the electron transfer during electrochemical redox mediation. The standard rate constant and peak-to-peak separation ΔE for the oxidation and reduction of the Fe(CN)63−/4- and Ru(NH3)62+/3+ redox probes reached ΔE values of only 60.6 and 59.8 mV, respectively. The enriched electrochemical performance of the BDDD electrodes is an advantageous feature allowing them to be applied as ultrasensitive electrodes, demonstrated here by paracetamol determination. The differential pulse voltammetry results revealed an enhanced electrochemical oxidation effect for paracetamol at the deuterium-grown (111)-rich diamond electrode. A single linear range from 1 to 125 μM along with a low detection limit of 0.76 μM were achieved.

We report a successful synthesis of a ternary AlB2-type intermetallic compound. The phase purity was obtained by fine-tuning the Pd : Ge ratio out of the idealized 1 : 3. Attempts to synthesize an Er analogue were not successful. We discuss the instability of the Er analogue based on the atomic size ratio and also suggest that the increased stability of Ho2Pd1+xGe3−x in the Pd-rich range likely stems from a combination of atomic size ratio, electronic, and entropic factors. The new Ho2Pd1.3Ge2.7 compound is found to exhibit cluster glass behavior with a freezing temperature of T ≈ 2.3 K.

Graphitic carbon nitride (g-C3N4) is a promising catalyst for contaminants of emerging concern removal applications, especially as a visible-light-driven material. In this study, g-C3N4 catalysts were effectively synthesized through a simple thermal polymerization method, using melamine, urea, and thiourea as precursors to elucidate the influence of these compounds on the final product’s photocatalytic performance. The degradation of a mixture of three parabens was investigated under different types of radiation: two artificial, ultraviolet-A (UVA) and visible LED, and natural sunlight. The urea-based catalyst (UCN) presented better results under all radiation sources, followed by thiourea, and finally, melamine. Among the artificial light sources, the degradation of parabens under UVA was considerably higher than visible—up to 51% and 21%, respectively—using UCN; however, the broader spectrum of natural sunlight was able to achieve the highest removals, up to 92%, using UCN. Comparing artificial radiation sources, UVA lamps presented 45% lower energy consumption and associated costs. Photocatalytic ozonation was tested using UCN and MCN, with UCN once more possessing superior performance and a synergetic effect between photocatalysis and ozonation, with complete removal under 12 min. The use of g-C3N4 was then successfully tested in initial screening and found to be an efficient alternative in more low-cost and feasible solar photocatalysis water treatment.

The effect of hexadecyltrimethylammonium bromide (CTAB) addition on the crystal structure, morphology, and magnetic properties of co-precipitated hexagonal barium ferrite was investigated. For a fixed amount of surfactant, different Fe3+ concentrations and Fe3+/Ba2+ ratios were used to optimize the formation of single-phase barium ferrite particles. The results indicated that the obtained ferrite particles exhibited coercivity changes similar to those of superparamagnetic particles with larger than theoretically calculated particle sizes. This results from the softening of the material due to the size reduction of the grains and incorporation of excess barium, localized on the surface of the particles. Therefore, lowering the energy barrier required to reverse the magnetization was observed, while high magnetization saturation was preserved. The precipitation of barium ferrite particles from a surfactant-rich solution allowed control of BaFe12O19 magnetic properties without introducing any modifications inside the crystal structure.

Self-organized TiO 2 nanotubes as immobilized photocatalysts were evaluated in detail for the photocatalytic degradation of parabens mixtures from ultrapure water. This kind of approach can be a very suitable option for emerging contaminants degradation considering the possibility of the catalyst reuse and recovery which will be simpler than when catalytic powders are used. The anodization method was applied for the TiO 2 nanotubes production under different preparation voltages (20, 30 and 40 V). These preparation conditions are important on the morphological characteristics of nanotubes such as length, as well as internal and external diameters. The photocatalytic efficiency was dependent on the materials preparation voltages. The photocatalytic oxidation was evaluated using two different irradiation sources, namely UVA and sunlight. These irradiation sources were evaluated for parabens mixture degradation using different number of catalytic plates. The increase of the number of plates improved the parabens degradation possibly due to the availability of more active sites which can be relevant for the hydroxyl radical's generation. The effect of the reactor design was also evaluated using sunlight irradiation. The configuration, position and solar concentrators can be important for the performance of degradation. The mechanism of degradation was analysed through by-products formation under sunlight irradiation. The main responsible for parabens degradation was hydroxyl radical. Decarboxylation, dealkylation and hydroxylation seem to be the most important reactional steps for the mixture decontamination.

The combination of experimental and theoretical investigation of two new Pt-rich intermetallic compounds: APt8P2 (A = Ca and La) is presented, including solid-state synthesis, crystal structure determination, physical properties characterization and chemical bonding analysis. APt8P2 was obtained through the high-temperature pellet synthesis. According to both single crystal and powder X-ray diffraction results, APt8P2 crystallize in the monoclinic DyPt8P2-type structure with space group I2/m (S.G. 12). Crystal structure of APt8P2 can be considered as intercalating multiple Pt layers into APt2P2. Magnetic susceptibility measurement indicates diamagnetism of both compounds. The specific heat down to 1.8 K shows no evidence for bulk superconductivity in either CaPt8P2 and LaPt8P2. Electronic structure calculations match well with the observed structural stability and metallic behavior. The following Crystal Orbital Hamiltonian Population (-COHP) calculations suggest that the difference of Pt-Pt antibonding interaction could be the key factor that results in the shrinkage of c axis in APt8P2.

We present the synthesis and experimental characterization of the electronic properties of the cubic Laves phase superconductor CaRh2. Its crystal structure was confirmed by powder X-ray diffraction and its ambient temperature lattice parameter (a = 7.5326(6) A) is in good agreement with the literature. Magnetization, resistivity and heat-capacity measurements indicate that CaRh2 is a moderate-coupling type-II superconductor (λe-p = 0.89) with a transition temperature Tc = 5.13 K. A sharp discontinuity at Tc in the heat capacity shows that the normalized specific-heat jump is Δ C/γTc = 1.78, which exceeds the value predicted by weak-coupling BCS theory (1.43).

Two-dimensional (2D) magnets such as chromium trihalides CrX

We have studied the magnetic, magnetotransport, and galvanomagnetic properties of TmNiC_{2}. We find that the antiferromagnetic and field induced metamagnetic and ferromagnetic orderings do not suppress the charge density wave. The persistence of Fermi surface pockets, open as a result of imperfect nesting accompanying the Peierls transition, results in an electronic carriers mobility of the order of 4×10^{3} cm^{2} V^{-1} s^{-1} in ferromagnetic state, without any signatures for a significant deterioration of nesting properties. This is independently evidenced by high, nonsaturating linear magnetoresistance reaching 440% at T=2 K and an analysis of the Hall conductivity. We thus demonstrate that, the coexistence of charge density wave and magnetism provides an alternative route to maintain high electronic mobility in the magnetically ordered state.

Novel visible light responsive materials for water splitting are essential for the efficient conversion of solar energy into hydrogen bond energy. Among other semiconductors, gadolinium orthovanadate has appropriate conduction and valence band edges positioned to split water molecules and a narrow band gap that allows the use of visible light for hydrogen generation. Thus, we present here that hydrogen evolution under visible light (λ > 420 nm) could be accomplished using hierarchical 3D GdVO4 particles, obtained by a simple, one pot hydrothermal synthesis. We found that applying various reaction components, such as EDTA-Na2 and EDTA, and adjusting the pH of the solution allow one to tune the shape of GdVO4 (such as short nanowires, long nanowires, short nanorods, long nanorods, nanoparticles and spheres – all having a tetragonal crystal structure) as well as optical and photocatalytic properties. The highest ability to photocatalytically split methanol solution into hydrogen under UV-Vis irradiation was detected for the long nanowire sample (42 μmol h−1), having almost 11 times higher efficiency in comparison with the weakest sample – short nanowires. In addition, GdVO4 spheres generated H2 more than 2 times (5.75 μmol h−1) in comparison with the short nanorod sample (2.5 μmol h−1) under visible light excitation. Photostable in three-hour work cycles, long nanowires and spheres were even able to generate hydrogen from pure water, reaching values of 17 and 3 μmol under UV-Vis and Vis light, respectively.

A series of novel ZnO quantum dots modified with rare earth metals was successfully prepared by a simple sol-gel approach. The effects of types (Eu, Er, Tb, Yb, Ho, La) and amounts (from 0.09 to 0.45 mmol) of lanthanides on the optical properties, structural characterization and photocatalytic activity of ZnO/RE QDs were systematically investigated. The X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) with energy dispersive X-ray analysis (EDX) and UV–Vis diffuse reflectance spectroscopy were used to characterize surface properties, while photoluminescence (PL) emission spectroscopy and UV–Vis-driven degradation of phenol in aqueous phase were applied to understand optical and photocatalytic properties. The experiments demonstrated that generally modification of ZnO QDs by lanthanides resulted in increase of photoactivity while photoluminesce decrease at the same moment. The highest photocatalytic activity among all obtained nanomaterials and the lowest photoluminescence quantum yield among ZnO/Er photocatalysts were observed for ZnO QDs modified with 0.09 mmol of erbium. Increased photocatalytic activity has been shown in successive samples: ZnO/0.09_Er > ZnO/0.18_Eu > ZnO/0.09_La > ZnO/0.27_Er > ZnO/0.18_Tb > pristine ZnO QDs. The experimental results were supported by calculations based on density functional theory (DFT) which revealed atomic and electronic structure of Er/La modified ZnO QDs.

Conversion coatings are one of the primary types of galvanic coatings used to protect steel structures against corrosion. They are created through chemical reactions between the metal surface and the environment of the phosphating. This paper investigates the impact that the addition of new metal cations to the phosphating reaction environment has on the quality of the final coating. So far, standard phosphate coatings have contained only one primary element, such as zinc in the case of zinc coatings, or two elements, such as manganese and iron in the case of manganese coatings. The structural properties have been determined using a scanning electron microscope (SEM), X-ray diffraction (XRD), and electrochemical tests. New manganese coatings were produced through a reaction between the modified phosphating bath and the metal (Ba, Zn, Cd, Mo, Cu, Ce, Sr, and Ca). This change was noticeable in the structure of the produced manganese phosphate crystallites. A destructive effect of molybdenum and chromium was demonstrated. Microscopic analysis, XRD analysis and electrochemical tests suggest that the addition of new metal cations to the phosphating bath affects the corrosion resistance of the modified coating.

A new neptunium intermetallic compound, NpPt 2 In 7 , has been synthesized in polycrystalline form and characterized by several macroscopic techniques. A Rietveld analysis of its powder X-ray diffraction pattern shows that NpPt 2 In 7 crystallizes in a tetragonal lattice with I 4/ mmm symmetry and lattice parameters a = 4.58471 ( 3 ) A, c = 21.5065 ( 3 ) A. Magnetic susceptibility, electrical resistivity, Hall effect, and heat capacity measurements indicate a metallic character and the occurrence of antiferromagnetic order below a Neel temperature T N = 23 K. The transition is exceptionally robust and T N decreases by 0.2 K under a magnetic field of 9 T. A modified Curie-Weiss fit of the high-temperature magnetic susceptibility curve χ ( T ) gives an effective magnetic moment μ e f f = 2.54 μ B close to the value expected for trivalent Np. Low temperature heat capacity measurements give a reduced Sommerfeld linear coefficient close to 25 mJ mol −1 K −2 and a Debye Temperature Θ D = 181 K. First principles, correlated-band electronic structure calculations suggest that the neptunium magnetic moment in NpPt 2 In 7 is localized and that a quasi-two-dimensional antiferromagnetic structure could result from the competition of very weak interlayer interactions leading to very anisotropic properties.

The synthesis, structure and elementary magnetic characterization of the homometallic warwickite V2OBO3 are reported. The material adopts the orthorhombic warwickite structure type at room temperature, space group Pnma (No. 62) with lattice parameters a = 9.2317(1) A, b = 3.1172(1) A, and c = 9.5313(1) A. Temperature-dependent magnetic susceptibility, electrical resistivity, and specific heat measurements show anomalies near 35 K, between 135 K and 150 K, and near 260 K, with the transition at ~ 35 K likely to a ferrimagnetic state. High resolution synchrotron powder X-ray diffraction data at temperatures between 295 K and 90 K display significant peak splitting upon cooling, indicating that at least one crystallographic symmetry change occurs at low temperatures.

Polycrystalline Pr3Ir was synthesized by arc melting. Its cementite-type crystal structure (Pnma) was confirmed by powder X-ray diffraction and estimated lattice parameters are in agreement with literature. Physical properties were measured by means of the ac and dc magnetic susceptibility, electrical resistivity and heat capacity. Our results indicate spin-glass behavior in Pr3Ir with a freezing temperature Tf = 6.58 K and activation energy Ea = 2.17 kBTf. Above Tf, the dc magnetic susceptibility of Pr3Ir follows a modified Curie-Weiss dependence with a paramagnetic Curie temperature θP = 3.4 K and an effective magnetic moment μeff = 3.72 (1) μB/Pr that is somewhat larger than expected for Pr+3 (μeff = 3.5 μB/Pr). Resistivity measurement shows that Pr3Ir is a poor metal with a residual resistivity ratio about 1.6. The spin-glass scenario in Pr3Ir likely originates from the dynamic fluctuations of the magnetic interactions, as it was proposed for stoichiometric, well ordered PrAu2Si2 Pr-based ternary compound.

The crystal structure and elementary properties of La15NbxGe9 are reported. Single-crystal X-ray diffraction, from a crystallite with only 0.12 Nb/formula unit, reveals that this compound, although transition metal deficient, crystallizes in a hexagonal “15-1-9”-like structure type, space group P63mc (no. 186) with lattice parameters a = b = 15.5017(2) A, c = 6.9173(2) A. The physical properties were examined by specific heat and resistivity measurements. La15Nb0.4Ge9 shows metallic behavior, and no superconductivity is observed above 0.4 K. The Sommerfeld coefficient (γ = 62.41(8) mJ mol−1 K−2) and the Debye temperature ( θ D = 267(1) K) were estimated from a fit to the low temperature heat capacity data. La15Nb0.4Ge9 is the first reported compound in the ternary La-Nb-Ge system.

The large single crystals of SrSnP were prepared using Sn self-flux method. The superconductivity in the tetragonal SrSnP is observed with the critical temperature of ∼2.3 K. The results of a crystallographic analysis, superconducting characterization, and theoretical assessment of tetragonal SrSnP are presented. The SrSnP crystallizes in the CaGaN structure type with space group P4/nmm (S.G. 129, Pearson symbol tP6) according to the single-crystal X-ray diffraction characterization. A combination of magnetic susceptibility, resistivity, and heat capacity measurements confirms the bulk superconductivity with Tc = 2.3(1) K in SrSnP. According to the X-ray photoelectron spectroscopy measurement, the assignments of Sr2+ and P3– are consistent with the chemical valence electron balance principles. Moreover, it is highly likely that Sn atom has only one unusual oxidation state. First-principles calculations indicate the bands around Fermi level are hybridized among Sr d, Sn p, and P p orbitals. The strong Sn–P...

New, monometallic nanoparticles (MNPs) decorated surface and rare earth (RE) ions doped lattice of perovskite-type (KTaO 3 )/pyrochlore-type (K 2 Ta 2 O 6 ) photocatalysts were successfully prepared by facile hydrothermal incorporation of RE ions into KTaO 3 /K 2 Ta 2 O 6 lattices followed by photodeposition of MNPs. The impact of noble metal type (MNPs = Au, Pt, Rh) and rare earth dopant type (RE = Er, Pr) on the physicochemical properties correlated with photoactivity of MNPs/RE-KTaO 3 and MNPs/RE-K 2 Ta 2 O 6 has been examined. All as-prepared photocatalysts were systematically characterized by UV–vis diffuse reflectance spectroscopy, photoluminescence emission spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, fast Fourier transform, powder X-ray diffraction, and X-ray photoelectron spectroscopy. The crystal structure was presented using VESTA software. Photocatalytic activity of samples under visible light irradiation was determined by pollutant decomposition, while UV–vis induced activity was estimated by H 2 generation efficiency. The experimental results suggested a synergistic effect between MNPs and RE-ions-modified KTaO 3 /K 2 Ta 2 O 6 , which resulted in greatly improved photocatalytic performance compared with that of pristine KTaO 3 /K 2 Ta 2 O 6 . Inclusion of RE ions into KTaO 3 /K 2 Ta 2 O 6 lattices probably leads to formation of RE4 f states below the conduction band levels to electron transition by lower photon excitation energy, while photoreduction of MNPs on the RE-KTaO 3 /RE-K 2 Ta 2 O 6 surface causes localized surface plasmon resonance and activates surface by adsorption for both O 2 and H 2 O molecules. The highest visible-light-induced photoactivity was observed for the Au/Er-KTaO 3 sample (16.48%) in phenol solution degradation and for the Pt/Pr-K 2 Ta 2 O 6 photocatalyst (36.13%) in gaseous toluene removal, respectively. Active species-trapping tests indicate that O 2 − radicals are meaningfully involved in phenol oxidation under visible light irradiation. The largest amount of H 2 evaluation was observed for the Pt/Pr-K 2 Ta 2 O 6 sample (93.16 µmol/min) under UV–vis irradiation, which also showed a relatively good lifetime in recycling. The present study describes noble- and rare-earth-metal-modified KTaO 3 /K 2 Ta 2 O 6 as an advanced material in photocatalysis.

A series of binary TiO2/SrTiO3 and ternary TiO2/SrTiO3_BiOI composites have been synthesized using multistep preparation method. Characterization of the obtained photocatalysts covered complex analysis including morphology + y (SEM), BET specific surface area, porosity, optical properties (DRS), chemical composition of surface (XPS), crystal structure and crystal size (XRD). UV–vis and Vis ligh induced photocatalytic activity was investigated in the model reaction of phenol degradation in the aqueous phase. The powder TiO2/SrTiO3_BiOI ternary composites exhibited a new photocatalytic properties and could be used in the heterogeneous photocatalysis processes. The photocatalytic activity observed in the phenol degradation reaction significantly increased under the visible light range irradiation. The best photocatalytic activity was observed for the TiO2/SrTiO3_BiOI_4 sample, about 30.2 % of phenol was decomposed after 1 h of visible light irradiation. The utilization of the nanolayered materials facilitates the separation of photocatalysts from the aqueous phase. Moreover, the composite was easily reused without the significant decrease of the photocatalytic activity in three subsequent cycles. After 5 h of Vis irradiation of the isotopically labeled (1-13C) phenol solution in the presence of the TiO2/SrTiO3_BiOI_4 composite, the salicylic, maleic, fumaric and malonic acids were detected using GC–MS equipment. The identification of degradation by-products led to clarification of phenol decomposition pathway. The role of active species during the decomposition process of organic compound was investigated using different types of active species scavengers.

Novel mono- and bimetallic nanoparticles (MNPs and BNPs) decorated surface of perovskite-type KTaO3 photocatalysts were successfully synthesized by hydrothermal reaction of KTaO3 followed by photodeposition of MNPs/BNPs. The effect of noble metal type (MNPs = Au, Ag, Pt, Pd, Rh, Ru or BNPs = Au/Pt, Ag/Pd, Rh/Ru), amount of metal precursor (0.5, 1.0, 1.5 or 2.0 wt%) as well as photoreduction method (simultaneous (both) or subsequent (seq) deposition of two metals) on the physicochemical and photocatalytic properties of MNPs- and BNPs-KTaO3 have been investigated. All as-prepared photocatalysts were subsequently characterized by UV–Vis diffuse reflectance spectroscopy (DRS), Brunauer-Emmett-Teller (BET) specific surface area and pore size distribution measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), powder X-ray diffraction (PXRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) emission spectroscopy. The crystal structure was performed using visualization for electronic and structural analysis (VESTA). The photocatalytic activity under Vis light irradiation was estimated in phenol degradation in aqueous phase and toluene removal in gas phase, while under UV–Vis light irradiation was measured amount of H2 generation from formic acid solution. The absorption properties of O2 and H2O molecules on KTaO3(1 0 0) surface supported by Au or Au/Pt NPs was also investigated using density-functional theory (DFT). The experimental results show that, both MNPs-KTaO3 and BNPs-KTaO3 exhibit greatly enhanced pollutant decomposition efficiency under Vis light irradiation and highly improved H2 production under UV–Vis light irradiation compared with pristine KTaO3. MNPs deposition on KTaO3 surface effects by disperse metal particle size ranging from 11 nm (Ru NPs) to 112 nm (Au NPs). Simultaneous addition of Au/Pt precursors results in formation of agglomerated larger metal nanoparticles (50–100 nm) on KTaO3 surface than subsequent deposition of Au/Pt with composition of concentrated smaller metal nanoparticles (>50 nm) on KTaO3 surface. The 0.5 Au/1.5 Pt-KTaO3_both and 2.0 Rh-KTaO3 reveal the highest Vis-induced activity among prepared samples in aqueous phase (14.75% of phenol decomposition after 90 min of irradiation) and gas phase (41.98% of toluene removal after 60 min of irradiation), respectively. The theoretical calculations confirmed that adsorption energy of O2 and H2O molecules was increased after loading of Au or Au/Pt NPs on KTaO3(1 0 0) surface. Control tests with scavengers show that O2 − radical is significantly involved in phenol oxidation under Vis light irradiation, which proposed mechanism is based on direct electron transfer from MNPs/BNPs to conduction band of KTaO3. The highest amount of H2 evaluation is obtained also by 0.5 Au/1.5 Pt-KTaO3_both after 240 min of UV–Vis light irradiation (76.53 µmol/min), which is eleven times higher than for pristine KTaO3 (6.69 µmol/min). Moreover, the most photocatalytic samples for each model reaction present good repeatability and stability after subsequent three cycles. Summarized, MNPs- and BNPs-KTaO3 are promising material in advanced applications of photocatalysis.

Novel rare earth-doped K2Ta2O6 (RE-K2Ta2O6) photocatalysts were successfully synthesized by one-step hydrothermal method. The effect of dopant type (RE = Y, Yb, Ho, Pr, Er) and amount of rare earth precursor (2, 4, 8 and 10 mol%) on the physicochemical and photocatalytic properties of RE-K2Ta2O6 have been investigated. All as-prepared materials were subsequently characterized by UV–vis diffuse reflectance spectroscopy (DRS), Brunauer-Emmett-Teller (BET) specific surface area measurement, scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, mass magnetic susceptometry and photoluminescence (PL) emission spectroscopy. The photocatalytic activity under UV–vis light irradiation was estimated in phenol degradation in aqueous phase, toluene removal in gas phase and H2 generation from formic acid solution. The experimental results show that, novel RE-K2Ta2O6 exhibits greatly improved degradation efficiency under UV–vis light irradiation compared with pristine K2Ta2O6. The Er-K2Ta2O6 and Pr-K2Ta2O6, obtained by introducing of 2 mol% of RE ions during synthesis, reveal the highest photocatalytic activity among prepared samples in aqueous phase (33% of phenol decomposition after 90 min of irradiation) and gas phase (45% of toluene removal after 60 min of irradiation), respectively. Moreover, both photocatalysts present good stability after subsequent three cycles. The active species trapping test shows that OH and O2 − radicals are significantly involved in phenol oxidation under UV–vis light irradiation. The amount of H2 evolution increases with increasing addition of Er dopant into K2Ta2O6 lattice. The highest H2 production is obtained for 10 mol% Er-K2Ta2O6 after 240 min of UV–vis light irradiation (15.40 μmol/min). Enhanced photoactivity performance can be attributed to incorporation of RE ions at K+ lattice site in RE-K2Ta2O6, probably leading to formation of new RE 4f states below the conduction band of K2Ta2O6 structure. To investigate the localization of RE ions in K2Ta2O6 structure, the band structure and partial density of the states (PDOS) have been investigated. Computer simulations were performed using plane-wave based Vienna ab-initio simulation package (VASP) with the generalized gradient approximation (GGA) by Perdew-Burke-Ernzerhof (PBE). Moreover, inclusion of RE ions in K2Ta2O6 causes predominance pyrochlore phase formation over perovskite in regular cubic structure. Summarized, RE-doped K2Ta2O6 is promising material in photocatalytic degradation of organic pollutants and H2 generation processes. Our work may provide valuable information for rare earth doping semiconductor with improved photocatalytic performance.