Search

Purpose: To investigate and assess the differences in crestal bone loss (CBL) between wide-diameter, external-hexagon-connection implants restored with platform-switching (PS) and platform-matching (PM) restorations with a follow-up of 10 years. Materials and Methods: This study retrospectively analyzed the updated and enlarged dataset of a 5-year prospective clinical study at 10-year follow-up. The data concerns 182 healthy adult subjects treated in a private dental practice who received a single wide-diameter implant with an external hexagon connection in the molar area, restored with either a PS restoration (test) or PM restoration (control). The amount of CBL was radiographically measured at each annual follow-up, as well as after 5 and 10 years of implant loading. In evaluating the association between the two types of abutments and bone loss (including change over time), a linear mixed effects model was run for longitudinal data. Results: Implants connected with PS restorations exhibited significantly lower reduction (0.25 mm) in CBL than those joined to PM restorations (P < .001; 95% CI from 0.22 to 0.29). However, both groups presented a higher increase in bone loss during the first year (0.58 mm in PS and 0.83 mm in PM) and a linear increment thereafter until the 10-year followup (0.046 mm/year; P < .001; 95% CI from .042 to .049). Conclusion: Notwithstanding the limitations of this study, it can be concluded that after 10 years of follow-up, the implant with a wide diameter and external-hexagon connection restored with a PS abutment seems to be more effective in reducing bone loss compared with the PM abutment. [ABSTRACT FROM AUTHOR]

Objectives: To assess the diagnostic ability in detecting oral lesions among dentists, dental hygienists, dentistry students, oral hygiene students, and non‐healthcare subjects. Materials and Methods: Participants were invited to classify 30 images of oral lesions in "benign" or "suspected malignant" only based on the visual appearance of the lesion. Diagnostic accuracy was assessed by calculating sensitivity and specificity with 95% confidence intervals and stratified by population group and image features (color, shape, and size of the lesions). Results: A total of 16,590 examinations by 553 subjects were analyzed. Overall sensitivity and specificity were 57% (95% confidence interval 56%–58%) and 64% (95% confidence interval 63%–65%). Diagnostic accuracy varied among population groups, with experienced dentists showing the lowest sensitivity (52%) and the highest specificity (71%). Red lesions, flat lesions, and large lesions had the lowest sensitivity (42%, 36%, 57%) but the highest specificity (70%, 75%, 76%). Conclusions: We found worrying low ability to detect suspected malignant oral lesions by both healthcare workers and non‐healthcare subjects. Lesion‐specific characteristics may lead to differences in recognition. Specific courses and more adequate teaching methods should be proposed to increase identification of oral lesions. [ABSTRACT FROM AUTHOR]

INTRODUCTION Tobacco smoke is a major health risk factor for smokers but also for non-smokers due to passive smoking. These risks come from conventional cigarette smoke but also from aerosol produced by electronic cigarettes and heated tobacco products (HTPs). The aim of this study was to investigate population knowledge about the adverse effects of passive smoking from traditional cigarettes, electronic cigarettes, and HTPs. METHODS Between February and October 2023, 504 subjects among the general population responded to a questionnaire with 8 questions in Italian, via a link to the Google Forms platform. The questions related to the oral health effects of active and passive smoking. Descriptive analyses of all variables in the questionnaire were performed, and statistical analyses between variables were carried out using the chi-squared test and Fisher's exact test. RESULTS A large subset of individuals interviewed stated that active smoking is harmful to health and consider active smoking more damaging compared with passive smoking (86.3%). The majority believed that passive smoking of cigarettes is more harmful to oral health than passive smoking of HTPs (79.4%) or electronic cigarettes (e-cigarettes) (84.9%). CONCLUSIONS Results suggest that most people in this study had good knowledge about the adverse effects of active or passive smoking on health; however, knowledge regarding e-cigarettes and HTPs was poor and confused. These results reveal the complexity of perceptions regarding different types of smoking and the need for further research to fully understand the risks associated with each type of passive smoking. [ABSTRACT FROM AUTHOR]

Background/Objectives: Advancements in oral imaging technology are continually shaping the landscape of dental diagnosis and treatment planning. Among these, photon-counting computed tomography (PCCT), introduced in 2021, has emerged as a promising, high-quality oral technology. Dental imaging typically requires a resolution beyond the standard CT systems achievable with the specialized cone-beam CT. PCCT can offer up to 100 µm resolution, improve soft-tissue contrast, and provide faster scanning times, which are crucial for detailed dental diagnosis and treatment planning. Using semiconductor detectors, PCCT produces sharper images and can potentially reduce the number of scans required, thereby decreasing patient radiation exposure. This review aimed to explore the potential benefits of PCCT in dental imaging. Methods: This review analyzed the literature on PCCT in dental imaging from January 2010 to February 2024, sourced from PubMed, Scopus, and Web of Science databases, focusing on high-resolution, patient safety, and diagnostic efficiency in dental structure assessment. We included English-language articles, case studies, letters, observational studies, and randomized controlled trials while excluding duplicates and studies unrelated to PCCT's application in dental imaging. Results: Studies have highlighted the superiority of PCCT in reducing artifacts, which are often problematic, compared to conventional CBCT and traditional CT scans, due to metallic dental implants, particularly when used with virtual monoenergetic imaging and iterative metal artifact reduction, thereby improving implant imaging. This review acknowledges limitations, such as the potential for overlooking other advanced imaging technologies, a narrow study timeframe, the lack of real-world clinical application data in this field, and costs. Conclusions: PCCT represents a promising advancement in dental imaging, offering high-resolution visuals, enhanced contrast, and rapid scanning with reduced radiation exposure. [ABSTRACT FROM AUTHOR]

Purpose: To describe the possible adverse effects of sodium hypochlorite (NaOCl) solutions, highconcentration alcohol solutions, and povidone-iodine products indicated for disinfection of inanimate surfaces against human coronavirus of the severe acute respiratory syndrome (SARS-CoV) on prosthesis materials, including zirconia, lithium disilicate, and acrylic resin. Materials and Methods: A systematic literature research was conducted in the SCOPUS, PubMed/Medline, Web of Science, EMBASE, and Science Direct databases from January 2010 to February 2020 using a combination of the following MeSH/Emtree terms and keywords: "sodium hypochlorite"; "alcohol"; "ethanol"; "povidone-iodine"; "dental ceramic"; "zirconia"; "lithium disilicate"; and "acrylic resin". Results: A total of 538 studies were identified in the search during initial screening, 44 were subject to full-text evaluation, and 24 fulfilled the inclusion criteria. Seven articles on zirconia and lithium disilicate investigated the effect of NaOCl (0.5% and 1%), 96% isopropanol, and 80% ethanol on bond strength after saliva contamination. The remaining articles evaluated color alteration, surface roughness modifications, decrease in flexural strength, and bond strength of all cleaning agents on acrylic resin. Conclusion: NaOCl solution (1%) for 1 minute is recommended to reduce SARSCoV infectivity and to minimize the risk of cross-contamination through prosthetic materials. An increase in surface roughness and color alteration on acrylic resin were recorded using 1% NaOCl, but without any clinical significance. A decrease in bonding strength was determined after using 1% NaOCl, 96% isopropanol, or 80% ethanol solutions on lithium disilicate. Silanization before the try-in procedure and the application of a second layer of silane after cleaning methods are recommended to improve the bond strength. [ABSTRACT FROM AUTHOR]

The problem of antibiotic resistance is becoming increasingly serious worldwide due to uncontrolled prescription. Dentists are among the groups that prescribe the most antibiotics, often to delay urgent treatment. The purpose of the present study is to investigate the prescribing protocols adopted by dentists for prophylaxis and antibiotic therapy in major clinical surgical indications. Methods: A ten-question survey was administered to a group of Italian dentists. The participants were asked about their preferences for antibiotic administration for the prevention of infective endocarditis, the administration of antibiotics to patients allergic to penicillin, the insertion of implants, and the extraction of third molars. The retrieved data were screened and analyzed. Results: A total of 298 surveys were filled out. The most-prescribed antibiotic was amoxicillin or amoxicillin with clavulanic acid or macrolides for allergic patients. The administration of two grams of amoxicillin one hour before surgery was the most widely used prescriptive protocol for prophylaxis. International guidelines on antibiotic prophylaxis for infective endocarditis were only partially followed. The most heterogeneous results emerged for prophylaxis associated with dental implants or provided prior to surgical third-molar extraction. Conclusions: The present study shows widespread antibiotic prescriptive heterogeneity among the sample of dentists analyzed, especially in conditions where international guidelines are lacking. An evidence-based consensus on prescriptive modalities in dentistry would be desirable in the near future. [ABSTRACT FROM AUTHOR]

Background: Different methods are used for the analysis of marginal and internal fit of partial crowns, but not all of them are applicable for in vivo studies. The aim of this review is to search the available methods, described in the current literature, to assess marginal and internal fit in partial crowns. Methods: an electronic search was performed on Pubmed and Web of Science databases to find studies published from 1 January 2017 up to 2 March 2023, following PRISMA guidelines and Cochrane handbook for systematic reviews. The search strategy applied was: "(marginal) AND (fit OR gap OR adaptation OR discrepancy) AND (inlay OR onlay OR partial crown)". In vitro studies which evaluated marginal and internal fit on CAD CAM or 3D printed partial crowns were included in this review. Quality of the studies was assessed by using Quality Assessment Tool For In Vitro Studies (QUIN tool). Results: 22 studies were included. Among conventional methods, direct view with microscope, indirect view on resin replicas, and silicone replica technique (SRT) were used. Considering new digital methods, micro-CT, SRT 3D and triple scan technique (TST) were applied. Conclusions: Among 2D methods, direct view technique is the most used marginal fit analysis. For a more comprehensive evaluation, a 3D digital analysis is suggested. SRT and indirect view are the only 2D methods available for in vivo analysis. A protocol for the application of TST for assessment in vivo is now available, but no studies are reported in literature yet. [ABSTRACT FROM AUTHOR]

Background: Bleeding disorders can be divided into three categories: congenital coagulation disorders (CCDs), antiplatelet-induced bleeding disorders (APBDs) and anticoagulant-induced bleeding disorders (ACBDs). Implant placement can be challenging in these kinds of patients. The aim of this study is to provide evidence on implant surgery in patients with bleeding disorders and to generate some practical recommendations for clinicians. Material and Methods: Pubmed/MEDLINE, Scopus, Web of Science and Cochrane Library databases were screened. The latest search was performed in July 2022. Case reports, case series, cohort studies, cross-sectional studies, case control studies, reviews, consensus reports, surveys and animal studies were included in the analysis. Results: Seventeen articles on CCDs were found, fourteen on APBDs and twenty-six on ACBDs. Most of these articles were case reports or case series. Patients with CCDs can be treated after the infusion of the missing coagulation factor. Patients with APBDs can be treated without withdrawing the therapy. Patients with ACBDs should be treated depending on the anticoagulative medication. Conclusion: Despite the low level of evidence, dental implants can be safely placed in patients with bleeding disorders. However, careful preoperative evaluation and the adoption of local and post-operative bleeding control measures are mandatory. [ABSTRACT FROM AUTHOR]

Introduction: Third molar surgery can cause post-operative complications to the patient due to the presence of a wound from the incision. This study aimed to compare marginal flap with para-marginal flap on postoperative complications by the measurements on pre and post-surgical plaque index (PI), bleeding on probing (BoP), maximum opening of the mouth (MOM), pain perception (PP) and post-surgical tumefaction (PT). Methods: In this double-blind randomized clinical trial, 40 patients were recruited and randomly allocated in two groups. In Group 1, third molar extraction was carried out after a marginal flap design was performed, while in Group 2 a para-marginal flap was performed. Plaque index, bleeding on probing, maximum mouth opening, and distal probing were assessed right before and one week after surgery, while post-operative pain perception and post-operative swelling were accounted one week following surgery. Results: Statistically significant differences were reported between treatment groups, as the para-marginal flap led to better outcomes for all the measured indexes. Conclusions: The para-marginal flap design may decrease the occurrence of post-operative complications and discomforts after mandibular third molar surgery, compared to marginal flap design. [ABSTRACT FROM AUTHOR]

Background: Dental calculus is the result of dental plaque mineralization, originating from the tooth‐associated bacterial biofilm. Recent evidence revealed that the dental calculus microbiome has a more complex composition than previously considered, including an unstructured mix of both aerobes and anaerobes bacteria. Actually, we lack information about the influence of host lifestyle factors, such as diet and health on this highly biodiverse ecosystem. Here, we provide a pilot study investigating dental calculus microbial biodiversity and its relation with the host diet. Methods: We collected 40 dental calculus samples during routine dental inspection; deoxyribonucleic acid was extracted and analyzed through 16S amplicon sequencing, while dietary information was retrieved through a questionnaire. Associations between diet and oral bacteria taxonomy and functional pathways were statistically tested. Results: Overall, microbiome composition was dominated by 10 phyla and 39 bacterial genera, which were differently distributed among samples. Cluster analysis revealed four main groups based on the taxonomic profile and two groups based on functional pathways. Each taxonomic cluster was dominated by different microbial biomarkers: Streptococcus, Rothia, Tannerella, Lautropia, and Fusobacterium. Bacteria genera and pathways were also associated with specific dietary elements, especially vegetable and fruit intake suggesting an overall effect of diet on dental calculus microbiome. Conclusions: The present study demonstrates that there exists an inter‐variability in the microbial composition of dental calculus among individuals of a rather homogeneous population. Furthermore, the observed biodiversity and microbial functions can find an association with specific dietary habits, such as a high‐fiber diet or a protein‐rich diet. [ABSTRACT FROM AUTHOR]

Background: Oral mucositis (OM) is one of the most debilitating side effects of chemotherapy. Among the current methods used in OM management, the feasibility of high power laser therapy (HPLT) has been proposed but not fully evaluated. Aim: The aim of this study was to evaluate the efficacy of HPLT in the treatment of OM in paediatric patients. Design: Fourteen oncohematological paediatric patients treated with chemotherapy and/or hematopoietic stem cell transplantation and affected by OM at different grades were enrolled in this study. All patients were treated with a class IV laser device in four sessions for four consecutive days, OM was evaluated with the WHO‐OTS scale. The perception of pain was assessed by the visual analog scale. Photographs of and information about lesions and patient questionnaires were taken and collected, respectively. Descriptive analyses and the Wilcoxon signed‐rank test (nonparametric test) were used, with a statistical significance of α =.05. Results: After a week into the treatment, 57% of patients were completely healed, whereas the whole cohort experienced a drastic decrease in pain, from an average value of 5.8–1.1 (p =.0016). The average number of injuries per patient decreased from 7.4 to 3.1 (p =.008). Conclusion: High power laser therapy appears to be a safe and efficacious method for managing OM. It reduces pain and severity of oral cavity injuries. Further studies are needed to determine the optimal parameters useful in OM treatment and to evaluate the relative effectiveness of HPLT to other treatments like LLLT. [ABSTRACT FROM AUTHOR]

Bone tissue engineering strategies are emerging as attractive alternatives to autografts and allografts in bone tissue reconstruction, in particular thanks to their association with nanotechnologies. Nanostructured biomaterials, indeed, mimic the extracellular matrix (ECM) of the natural bone, creating an artificial microenvironment that promotes cell adhesion, proliferation and differentiation. At the same time, the possibility to easily isolate mesenchymal stem cells (MSCs) from different adult tissues together with their multi-lineage differentiation potential makes them an interesting tool in the field of bone tissue engineering. This review gives an overview of the most promising nanostructured biomaterials, used alone or in combination with MSCs, which could in future be employed as bone substitutes. Recent works indicate that composite scaffolds made of ceramics/metals or ceramics/polymers are undoubtedly more effective than the single counterparts in terms of osteoconductivity, osteogenicity and osteoinductivity. A better understanding of the interactions between MSCs and nanostructured biomaterials will surely contribute to the progress of bone tissue engineering.

Purpose: To evaluate the influence of the crown-to-implant ratio (CI) on marginal bone loss (MBL) around short dental implants placed in the posterior mandible. Materials and Methods: All patients treated with short implants (7-mm length) in the posterior mandible between 1994 and 2003 at the Dental Clinic of the Department of Neuroscience of the University of Padua (Italy) were retrospectively included in the analysis. MBL and clinical CI (cCI) were measured on the radiographs. Implant characteristics including implant diameter, prosthetic type, retention mode, antagonist type, veneering material, and implant surfaces were retrieved from local medical records. A generalized linear mixed model was estimated to identify the predictors of MBL. Results: A total of 108 dental implants placed in 51 patients were included in the analysis. Mean follow-up was 16 years (range: 11 to 20 years). Mean cCI was 2.21 (SD = 0.31) with a mean crown height of 10.86 mm (SD = 0.99). Mean MBL was 1.42 mm (SD = 0.38). At multivariable analysis, cCI ≥ 2 was associated with higher MBL (regression coefficient: 0.27; 95% CI: 0.15 to 0.40), while implant characteristics, follow-up, and site were not associated with MBL. The effect of a cCI ≥ 2 was estimated in an increase of 0.28 mm in MBL (95% CI: 0.14 to 0.43 mm). Conclusion: Higher cCI was associated with greater MBL of implant-supported fixed dental prostheses in short dental implants placed in the posterior mandible, while implant characteristics, follow-up, and site were not associated with MBL. However, the increase of 0.28 mm of MBL in patients with a cCI ≥ 2 may not be clinically relevant. [ABSTRACT FROM AUTHOR]

Introduction: The oral cavity and the teeth are frequently subjected to numerous physiological pH variations, mainly due to the type of diet. These changes are the main cause of enamel demineralization and consequent breakage under mechanical forces. This causes severe sensitivity and sometimes pain, which endures unless the hard tissue is remineralized. Since enamel does not self-repair, the application of alloplastic materials that have the property of releasing remineralizing ions is strongly recommended. The aim of this in vitro study is to evaluate the effectiveness of two different toothpastes and a fluoride varnish in the prevention of demineralization, and their ability to remineralize enamel after it has undergone several acidifications. Methods: Eight human teeth with no caries or defects were prepared. The acid attack simulations were performed using a commercial cola carbonated drink. Samples were immersed in 5 mL of soft drink for two minutes at room temperature, and then were rinsed with distilled/deionized water. The immersion process lasted about 2 min, and was repeated four times for a total of eight minutes. Then, two different types of toothpaste, one with and one without fluoride, and a fluoride varnish were applied to the surfaces of the samples and rinsed off with demineralized water. A second acidification cycle was then carried out, with the subsequent reapplication of the three different products to evaluate their ability to protect against demineralization. SEM and profilometer analysis were then carried out to evaluate the results. Results: The statistical analysis showed a good remineralization capacity for all three products, especially in the fluoride-varnish-treated samples. However, regarding protection from demineralization, non-fluoride toothpaste was found to be ineffective, while fluoride toothpaste and varnish produced positive results. Conclusions: Dental professionals should advise fluoride toothpastes and varnishes over non-fluoride toothpastes. Fluoride toothpastes and varnishes represent a valid treatment for surface remineralization after a first acid attack and for protection from subsequent demineralization in an acid environment, such as that which can develop in the oral cavity. [ABSTRACT FROM AUTHOR]

Little is known about whether the depth of the vestibular fornix influences people's ability to access their teeth to remove plaque during oral hygiene measures at home. This study aimed to investigate the association between vestibular fornix depth and periodontal health. The study included 100 adults in good periodontal health, with a plaque index (PI) ≤15%, bleeding on probing (BOP) ≤10%, and a pocket probing depth (PPD) ≤3 mm. Using a periodontal probe and a digital caliper, we measured PI, BOP, PPD, gum phenotype, gum recession, the width of keratinized gingiva, and the vestibular fornix depth. Adjustment for multiple testing was performed using the Benjamini-Hochberg procedure. Results: Vestibular fornix depth was associated with width of keratinized gingiva (ρ 0.60, p < 0.0001). Median BOP was 1.39% in participants with a vestibular fornix depth ≥7 mm, and 0.00% in those with a vestibular fornix depth <7 mm (p = 0.62). Vestibular fornix depth and the width of keratinized gingiva did not seem to be associated with the level of periodontal health. Participants with a shallower vestibular fornix depth should be given advice on how best to ensure good oral hygiene at home. [ABSTRACT FROM AUTHOR]

The relationship between periodontitis and such systemic disorders as diabetes, cardiovascular disease and obesity has been extensively investigated. There is less scientific evidence available, however, regarding the influence of systemic diseases on the risk of late failure of dental implant rehabilitation due to peri-implantitis. The aim of the present study was to review the literature on the role of several common systemic disorders (diabetes, obesity, cardiovascular disease, hypertension and osteoporosis) in the onset of peri-implantitis. A database search initially yielded 2787 studies of potential interest published up to 1 March 2022 (993 in PubMed; 908 in Web of Science; and 886 in Scopus). After removing 1190 duplicate articles and checking the titles, abstracts and full texts for relevance, 70 articles were selected for the present analysis. Only cohort, case-control studies and clinical case series were considered. Most of the literature concludes for no association between diabetes, cardiovascular disease, hypertension or osteoporosis and the risk of peri-implantitis. On the other hand, almost all the studies that investigated obesity as a risk factor for implant rehabilitation found a positive association between the two. Further longitudinal studies are needed to better understand the effects of systemic diseases on rehabilitation with dental implants. [ABSTRACT FROM AUTHOR]

Full-arch fixed implant-supported prostheses have shown high biologic success rates after long-term follow-up, along with technical and prosthetic complications. Adequate planning is necessary for immediate implant occlusal loading in a completely edentulous maxilla or mandible. For totally edentulous patients, the main prosthetic problem is the transfer of diagnostic information to the master cast when an immediate loading approach is used. The aim of this clinical case report is to illustrate a new prosthetic protocol for immediate implant loading in edentulous or potentially edentulous patients. This innovative procedure can successfully guide the clinician step by step in a predictable way from diagnosis to delivery of an immediately loaded implant-supported full-arch rehabilitation. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this in vitro study was to verify whether or not stock and computer-aided design/ computer-aided manufacturing (CAD/CAM) abutments show similar precision in the connection with the respective implants. Materials and Methods: Ten CAD/CAM titanium abutments were compared with 10 stock titanium abutments. Each abutment fit a regular-platform implant (Institute Straumann). Implants and abutments were measured independently and then connected. During the connection procedure, the torque was measured using a six-axes load cell. Then, outer geometric features of the implant-abutment connection were measured again. Finally, the assembly was sectioned to provide the analysis of inner surfaces in contact. The geometric measurements were performed using a multisensored opto-mechanical coordinate measuring machine. The following parameters were measured and compared for the CAD/CAM and stock titanium abutment groups, respectively: width of interference and interference length between the conical surfaces of the implant and abutment; and volume of material involved in the implant-abutment connection. Results: Interference width mean ± SD values of 18 ± 0.5 and 14 ± 0.5 μm were calculated for the stock and CAD/CAM titanium abutment groups, respectively. The difference was statistically significant (P = .02). Furthermore, the interference length mean ± SD values of 763 ± 10 and 816 ± 43 μm were calculated for stock and CAD/CAM titanium abutment groups, respectively. The difference was also statistically significant (P = .04). Finally, the volume of material involved in the implant-abutment connection was compared between stock and CAD/CAM titanium abutment groups; the mean ± SD values of 0.134 ± 0.014 and 0.108 ± 0.023 mm3 were significantly different (P = .009). Conclusion: Both standard and CAD/CAM abutment groups showed a three-dimensional (3D) seal activation after the screw tightening. Nevertheless, stock titanium abutments showed a significantly higher volume of material involved in the implant-abutment connection compared with that of CAD/CAM titanium abutments. [ABSTRACT FROM AUTHOR]

Biobanks are not-for-profit services for the collection, processing, storage and distribution of biological samples and data for research and diagnostic purposes. In dentistry, biological materials and data obtained from questionnaires investigating oral conditions can be stored and used for large-scale studies on oral and systemic diseases. To give some examples: gene expression microarrays obtained on biobanked specimens were used in the identification of genetic alterations in oral cancer; efforts to identify genetic mechanisms behind dental caries have been based on an integrative analysis of transcriptome-wide associations and messenger RNA expression. One of the largest studies on facial pain was conducted using Biobank data. Cryopreservation of dental pulp stem cells is a common practice in tooth biobanks. With the exception of teeth and pulp, also leftover oral soft and hard tissues may represent a source of healthy samples that has rarely been exploited as yet. While biobanks are increasingly attracting the attention of the scientific community and becoming economically sustainable, a systematic approach to this resource in dentistry seems to be lacking. This review illustrates the applications of biobanking in dentistry, describing biobanked pathological and healthy samples and data, and discussing future developments. [ABSTRACT FROM AUTHOR]

The present review aimed to assess the possible relationship between occlusal overload and peri-implant bone loss. In accordance with the PRISMA guidelines, the MEDLINE, Scopus, and Cochrane databases were searched from January 1985 up to and including December 2021. The search strategy applied was: (dental OR oral) AND implants AND (overload OR excessive load OR occlusal wear) AND (bone loss OR peri-implantitis OR failure). Clinical studies that reported quantitative analysis of occlusal loads through digital contacts and/or occlusal wear were included. The studies were screened for eligibility by two independent reviewers. The quality of the included studies was assessed using the Risk of Bias in Non-randomized Studies of Interventions (ROBINS-I) tool. In total, 492 studies were identified in the search during the initial screening. Of those, 84 were subjected to full-text evaluation, and 7 fulfilled the inclusion criteria (4 cohort studies, 2 cross-sectional, and 1 case-control). Only one study used a digital device to assess excessive occlusal forces. Four out of seven studies reported a positive correlation between the overload and the crestal bone loss. All of the included studies had moderate to serious overall risk of bias, according to the ROBINS-I tool. In conclusion, the reported data relating the occlusal analysis to the peri-implant bone level seem to reveal an association, which must be further investigated using new digital tools that can help to standardize the methodology. [ABSTRACT FROM AUTHOR]

Purpose: To compare the flexural properties and the adhesion of Lactobacillus salivarius (LS), Streptococcus mutans (SM), and Candida albicans (CA) on heat-polymerized (CV), CAD-CAM milled (CAD), or 3D-printed (3D) Poly (methylmethacrylate) (PMMA). Methods: Ultimate Flexural Strength (UFS), Flexural Strain (FS) (%) at Flexural Strength, and Flexural Modulus (FM) of specimens (65.0×10.0×3.3 mm) from each PMMA group (n=6) were calculated by using the 3-point bending test. The surface roughness profiles (R) were measured before and after polishing with a contact profilometer. LS, SM, and CA adhesion on PMMA specimens (n=18) (10 mm in diameter, 3 mm in height) was assessed after 90 minutes and 16 hours by using scanning electron microscopy. The Kruskal-Wallis test with post hoc analysis was performed to compare the groups (alpha=0.05). Results: Mean UFS values were 80.79±7.64 MPa for CV, 110.23±5.03 MPa for CAD, and 87.34±6.39 MPa for 3D. Mean FS values were 4.37±1.04% for CV, 4.71±0.62% for CAD, and 6.19±0.13 % for 3D. Mean FM values were 2542±301 MPa for CV, 3435±346 MPa for CAD, and 2371±197 MPa for 3D. CAD had the lowest average R value (0.29±0.16 µm) before polishing, and bacterial adhesion after 90 minutes of incubation. R value and microbial adhesion were not different amongst groups after polishing and 16 hours of incubation, respectively. Conclusion: The CAD group displayed the best flexural properties, except for FS, the lowest roughness before polishing and bacterial adhesion after 90 minutes of incubation. All tested PMMAs had similar surface roughness after polishing, and microbial adhesion after 16 hours of incubation. [ABSTRACT FROM AUTHOR]

(1) Objective: To evaluate and compare the depth of cure (DOC) of two bulk-fill flowable composites (Filtek Bulk Fill Flowable Restorative and Tetric EvoFlow Bulk Fill), two conventional flowable composites (Filtek Supreme XTE Flowable Restorative and G-ænial Flo X) and one high-strength universal injectable composite (G-ænial Universal Injectable). (2) Methods: specimens were placed in a stainless-steel mold with an orifice of 4 mm in diameter and 10 mm in depth and light-cured for 20 s using a light emitting diode (LED) light-curing unit (LCU) with an irradiance of 1000 mW/cm2; depth of cure was assessed using the ISO 4049 scrape technique, and the absolute length of the specimen of cured composite was measured in millimeters with a digital caliper. The same procedure was repeated with 14 samples for each material under investigation, for a total number of 70 test bodies. Material roughness and hardness results were also investigated using, respectively, a 3D laser confocal microscope (LEXT OLS 4100; Olympus) at ×5 magnification and a Vickers diamond indenter (Vickers microhardness tester, Shimadzu®, Kyoto, Japan) under 10-N load and a 30 s dwell time. SEM images at 3000 and 9000 magnification were collected in order to study the materials' filler content. Statistical analysis were performed by a commercial statistical software package (SPSS) and data were analyzed using multiple comparison Dunnett's test. (3) Results: The average DOC of both bulk-fill composites was more than 4 mm, as a range of 3.91 and 4.53 mm with an average value of 4.24 and 4.12 mm, while that of the conventional flowable composites was much lower, as a range of 2.47 and 2.90 mm with an average value of 2.58 and 2.84 mm; DOC of the high-strength injectable composite was greater than the one of traditional composites, but not to the level of bulk-fill materials, as a range of 2.82 and 3.01 mm with an average value of 3.02 mm. Statistical analysis revealed significant differences (p-values < 0.05) in the depth of cure between bulk fill flowable composites and other composites, while there was no difference (p-values > 0.05) between the materials of the same type. (4) Conclusions: Bulk-fill flowable composites showed significantly higher depth of cure values than both traditional flowable composites and high-strength injectable composites. [ABSTRACT FROM AUTHOR]

The aim of this study was to compare the interproximal papilla stability of restorations supported by computer-aided design/computer-assisted manufacture (CAD/CAM) abutments to those supported by prefabricated stock abutments in anterior areas over a 2-year follow-up. Abutments were selected depending on implant inclination and thickness of buccal peri-implant soft tissues from the following: zirconia stock, titanium stock, zirconia CAD/CAM and titanium CAD/CAM. Differences between the height of the papilla tip were measured (REC). Results: REC values of titanium and zirconia CAD/CAM abutments were significantly lower than those of titanium and zirconia stock. The use of titanium and zirconia CAD/CAM abutments is related to better interproximal papillae stability. [ABSTRACT FROM AUTHOR]

Subgingival margins are often required for biologic, mechanical, or esthetic reasons. Several investigations have demonstrated that their use is associated with adverse periodontal reactions, such as inflammation or recession. The purpose of this prospective randomized clinical study was to determine if two different subgingival margin designs influence the periodontal parameters and patient perception. Deep chamfer and feather-edge preparations were compared on 58 patients with 6 months follow-up. Statistically significant differences were present for bleeding on probing, gingival recession, and patient satisfaction. Featheredge preparation was associated with increased bleeding on probing and deep chamfer with increased recession; improved patient comfort was registered with chamfer margin design. Subgingival margins are technique sensitive, especially when feather-edge design is selected. This margin design may facilitate soft tissue stability but can expose the patient to an increased risk of gingival inflammation. [ABSTRACT FROM AUTHOR]