Search

Multinuclear NMR spectroscopy reveals the formation of an equilibrium mixture of novel rhodium amido complexes in the reaction of LiNHPh with four Rh(I) complexes. Reaction in the presence of 10 equiv of LiNHPh leads to the formation of a stable single, anionic, bis(phosphine)bis(anilido)rhodium(I) complex. 31P(1H) and 103Rh(1H) NMR experiments help characterize the anionic complex.

A series of ferrocenylphosphine-stabilized rhodium nanoparticles has been prepared in one pot from the organometallic [Rh(η3-C3H5)3] precursor. This complex has been decomposed by hydrogen treatment (3 bar) in dichloromethane in the presence of five different ferrocene-based phosphine ligands. Very small rhodium nanoparticles in the size range of 1.1–1.7 nm have been obtained. These nanoparticles have shown activity in a model catalytic reaction, namely the hydrogenation of styrene. These results evidence that the metal surface is not blocked despite the steric bulk of the stabilizing ligands. Moreover, certain selectivity has been observed depending on the ligand employed. To the best of our knowledge, such a type of compound has not yet been used for stabilizing metal nanoparticles and our findings highlight the interest to do so. [ABSTRACT FROM AUTHOR]

A porous Ru nanomaterial exhibits high electrocatalytic performance and excellent durability for the hydrogen evolution reaction (HER) under both acidic and neutral conditions. It displays a low overpotential of 83 mV at a current density of 10 mA cm−2 and an excellent durability up to 12 h in 0.5 M H2SO4. [ABSTRACT FROM AUTHOR]

The solution synthesis of rhodium nanoparticles (Rh NPs) was achieved from the organometallic complex [Rh(η3-C3H5)3] under mild reaction conditions in the presence of a polymer (PVP), a monophosphine (PPh3) and a diphosphine (dppb) as a stabilizer, leading to very small Rh NPs of 2.2, 1.3 and 1.7 nm mean size, with PVP, PPh3 and dppb, respectively. The surface properties of these nanoparticles were compared using a model catalysis reaction namely, hydrogenation of cyclohexene, first under colloidal conditions and then under supported conditions after their immobilization onto an amino functionalized silica-coated magnetite support. PVP-stabilized Rh NPs were the most active catalyst whatever the catalytic conditions as a result of a strong coordination of the phosphine ligands at the metal surface that blocks some surface atoms even after several recycles of the supported nanocatalysts and limit the reactivity of the metallic surface. [ABSTRACT FROM AUTHOR]

The synthesis and catalytic activity of long-chain NHC-stabilized RuNPs are presented. Full characterization of these novel nanostructures including surface state studies show that the ligand influences the number and the location of Ru active sites which impacts the NP catalytic activity, especially in hydrogenation reactions. The high stability and versatility of these nanosystems make them successful catalysts for both oxidation and hydrogenation reactions that can even be performed successively in a one pot-fashion. [ABSTRACT FROM AUTHOR]

The betaine adduct of N-heterocyclic carbene and carbodiimide (ICy·(p-tol)NCN) was found to be a very efficient ligand to prepare very small (1–1.3 nm) ruthenium nanoparticles (RuNPs). The coordination of the ligand on the metal surface takes place through the carbodiimide moiety. The resulting RuNPs led to decarbonylation of THF and showed size selectivity for styrene hydrogenation. [ABSTRACT FROM AUTHOR]

Structural and spectroscopic properties of tetranuclear ruthenium hydrido clusters, and to a less extent, of hexanuclear ruthenium hydrido clusters, are investigated theoretically. Some of these (H)nRuk(L)m (k = 4, 6) clusters were experimentally synthesized and characterized. Non-existing structures are also considered in order to examine the role of ligands on their structure, vibrational spectra and 1HNMR chemical shifts. The calculated properties are found in very good agreement with experimental data, when available. Beyond the intrinsic interest elicited by transition metal clusters, these compounds are also considered in this paper as relevant to diamagnetic ruthenium nanoparticles as well as building blocks of hcp surfaces, which is the ruthenium nanoparticle lattice. On the basis of the very good agreement between experiments and theory, the structural and spectroscopic properties of several model clusters are also predicted in order to bring additional data which may help to analyze the spectral signature of ruthenium nanoparticles. A particular emphasis is put on 1H NMR, which is of high practical importance for characterizing the presence of hydrides in ruthenium clusters and nanoparticles. Several topics are discussed: the structural preference of surface hydrides for terminal-, edge-bridging or face-capping coordination modes, hydrides adsorption energies, the possible presence of interstitial hydrogen atoms, the dependence of 1H chemical shifts on ligands and on electron counting. [ABSTRACT FROM AUTHOR]

Review: 74 refs. [ABSTRACT FROM AUTHOR]

Here we report on the organometallic synthesis of polyvinylpyrrolidone (PVP)-stabilized palladium-rhodium nanostructures that display high electrochemical properties when used as carbon-supported electrodes (Pd x Rh 1-x -PVP/C) for methanol oxidation reaction (MOR). These nanostructures were synthesized by hydrogenation of the tris(dibenzylideneacetone)dipalladium(0) (Pd 2 (dba) 3) and tris(allyl) rhodium (Rh(η3-C 3 H 5) 3) complexes, in tetrahydrofuran (THF) under mild reaction conditions (room temperature and 3 bar H 2) and in the presence of PVP as stabilizer. The influence of methanol concentration (0.5, 1.0 and 2.0 M) as well as different scan rates (5–100 mV s−1) was evaluated to determine changes in the stability and catalytic activity. The organometallic approach and the use of PVP for the preparation of PdRh electrode materials promoted the formation of highly dispersed nanostructures, that led to a remarkably enhanced methanol electro-oxidation in alkaline medium. This high catalytic behavior can reasonably arise from a synergistic effect between Pd and Rh metals as, under the applied conditions, Rh is expected to enhance the Pd ability to oxidize methanol to CO 2 (oxophilic character) as well as the catalyst stability. From all the evaluated electrode materials, Pd 8 Rh 2 -PVP/C electrode showed the highest mass activity at high methanol concentration (2.0 M) and low scan rate (10 mV s−1). This catalyst showed a performance up to 26 times higher than that of Pd-PVP/C and interestingly an electroactivity superior to that of previously reported PdRh catalysts. [Display omitted] • This synthesis led to the formation of well-dispersed nanostructures of size <5 nm. • Pd 8 Rh 2 -PVP/C showed an enhanced performance, up to 26 times higher than Pd-PVP/C. • CVs shifts in the oxidation peak potential towards (-) values as Rh amount increases. • Oxophilic character in the PdRh alloys is favored at low Rh quantities. [ABSTRACT FROM AUTHOR]

Supported Pd nanocatalysts were prepared by deposition of Pd nanoparticles (NPs) onto spherical mesoporous carbon beads (MB) functionalized by thermal or acidic treatement. The Pd NPs were synthesized by decomposition of [Pd 2 (dba) 3 ] (dba: dibenzylideneacetone) under dihydrogen either directly on the carbon supports without stabilizer leading to naked Pd NPs (Pd/MB series) or in solution in the presence of a stabilizer (polymer (PVP series) or triphenylphosphine (TPP series)) to obtain stable colloidal solutions that were further used to impregnate the carbon materials to have carbon-deposited Pd NPs. The NPs deposited on carbon displayed a Pd loading from 0.5 to 14.8 wt.% and were characterized by different techniques (nitrogen physisorption at 77 K, H 2 -chemissorption and TPD, XRD, XPS and HRTEM). Their catalytic performance in deoxygenation of oleic acid was evaluated in batch and flow reaction conditions. Flow conditions led to superior results compared to batch. No aromatic compounds were detected as side products, but in the case of the Pd/MB series, octadecanol and octadecane were significantly formed suggesting the involvement of a deoxygenation mechanism in which the hydrocarbons were produced via both decarbonylation/decarboxylation and dehydration steps. Further experiments carried out in H 2 /N 2 mixture or in pure N 2 highlighted the key role of hydrogen. For a N 2 /H 2 of 2.5:1 the dehydration route was crossing out and even no traces of octadecanol nor octadecane were detected. Then, complete removal of H 2 produced heptadecene in a high excess compared to heptadecane (almost 7–1) thus suggesting the decarbonylation/decarboxylation steps as the main route. ICP-OES measurements indicated no leaching of palladium and simple washing of catalysts with mesitylene allowed recycling without any change in conversion or product distribution. [ABSTRACT FROM AUTHOR]

Abstract: Both (Ni, Pt) and bimetallic (Ni x Pt; x =1, 2, 3) nanoparticles have been synthesized by hydrogenation of Ni(cod)2 ad Pt2(dba)3 in the presence of a weak coordinating ligand, hexadecylamine (CH3(CH2)15NH2, HDA). These nanostructures were characterized by different techniques (Fourier Transform-Infrared Spectroscopy (FT-IR), High-Resolution Transmission Electron Microscopy (HRTEM)), and were evaluated as Hydrogen Evolution Reaction electrocatalysts in 0.5M sulfuric acid. The effects of varying the platinum amount during the synthesis were systematically studied by Cyclic Voltammetry (CV), polarization measurements and electrochemical impedance spectroscopy (EIS) techniques. HRTEM shows that the bimetallic nanostructures display a different morphology compared to that observed for pure Ni and Pt ones. The process of hydrogen adsorption–desorption in the as-prepared electrodes seems to occur in (110) and (100) facets. It was found that the increase in the activity for the HER is due to an increased electrochemical active surface area (ECSA) and/or stabilization in the case of elemental electrode materials; and to the effect of Pt amount in the case of the Ni–Pt nanostructures (synergistic effect leads to lower overpotential). It has been established that the main pathway for the HER is Volmer–Heyrovsky. [Copyright &y& Elsevier]