Search

Rice provides poor yields in acidic soils due to several nutrient deficiencies and metal toxicities. The low availability of phosphorus (P) in acidic soils offers a natural condition for screening genotypes for grain yield and phosphorus utilization efficiency (PUE). The objective of this study was to phenotype a subset of indica rice accessions from 3000 Rice Genome Project (3K-RGP) under acidic soils and find associated genes and alleles. A panel of 234 genotypes, along with checks, were grown under low-input acidic soils for two consecutive seasons, followed by a low-P-based hydroponic screening experiment. The heritability of the agro-morphological traits was high across seasons, and Ward's clustering method identified 46 genotypes that can be used as low-P-tolerant donors in acidic soil conditions. Genotypes ARC10145, RPA5929, and K1559-4, with a higher grain yield than checks, were identified. Over 29 million SNPs were retrieved from the Rice SNP-Seek database, and after quality control, they were utilized for a genome-wide association study (GWAS) with seventeen traits. Ten quantitative trait nucleotides (QTNs) for three yield traits and five QTNs for PUE were identified. A set of 34 candidate genes for yield-related traits was also identified. An association study using this indica panel for an already reported 1.84 Mbp region on chromosome 2 identified genes Os02g09840 and Os02g08420 for yield and PUE, respectively. A haplotype analysis for the candidate genes identified favorable allelic combinations. Donors carrying the superior haplotypic combinations for the identified genes could be exploited in future breeding programs. [ABSTRACT FROM AUTHOR]

The mining industry is confronted with substantial challenges in achieving environmental sustainability, particularly regarding water usage, waste management, and dam safety. The increasing global demand for minerals has led to increased mining activities, resulting in significant environmental consequences. By 2025, an estimated 19 billion tons of solid tailings are projected to accumulate worldwide, exacerbating concerns over their management. Tailings storage facilities represent the largest water sinks within mining operations. The mismanagement of water content in tailings can compromise their stability, leading to potential dam failures and environmental catastrophes. In response to these pressing challenges, the mining industry is increasingly turning to innovative solutions such as tailings dewatering and water reuse/recycling strategies to promote sustainable development. This review paper aims to (I) redefine the role of mine tailings and explore their physical, chemical, and mineralogical characteristics; (II) discuss environmental concerns associated with conventional disposal methods; (III) explore recent advancements in dewatering techniques, assessing their potential for water recovery, technical and economic constraints, and sustainability considerations; (IV) and present challenges encountered in water treatment and recycling within the mining industry, highlighting areas for future research and potential obstacles in maximizing the value of mine tailings while minimizing their environmental impact. [ABSTRACT FROM AUTHOR]

Biochar is known as a well-developed porous carbonaceous material with multifunctional abilities that can enhance the physical properties of soils. However, the lack of certainty about the consequences of biochar application to soils has limited its acceptability. Application of biochar can lead to a series of changes in the physical functions of soil, which are crucial in both agricultural and environmental management. The type of feedstock, pyrolysis conditions, size of particles, and rate of amendments are responsible for biochar effectiveness. Concurrently, the physical characteristics of soil, such as particle-size distribution, can intensify the impacts. Beside the physical attributes, the chemical components and interactions between biochar and the soil interface may play an important role. The chemical properties, such as the value of electrical conductivity, pH and zeta potential, are the remarkable parameters in the hydrophysical behavior. The summary proposes that biochar has a great contribution In enhancing the definite range of aggregation formation, reduction of compaction and shear strength frequency and/or intensity, improvement of microorganisms activity, and abundance. Simultaneously, biochar plays a devastating role by filling the pores, blocking the water flow pathways, and inhibiting macro fauna growth. Particle size of biochar as a major factor, and surface functional groups as a minor factor, affect the performance of biochar in improving the hydrophysical properties of amended soils. The increment in the dosage of biochar application is not promising to enhance the physical properties of soils. Therefore, it is necessary to find a balance between the consumption of biochar and promotion of the soil-water dynamic. This review provides an overview of fastidious perspectives on how to achieve an efficient and sustainable use of biochar in hydrophysical properties. [ABSTRACT FROM AUTHOR]

Arsenic (As), a poisonous and carcinogenic heavy metal, affects human health and the environment. Numerous technologies can remove As from drinking water. Adsorption is the most appealing option for decentralized water treatment systems (DWTS) for small communities and household applications because it is reliable, affordable, and environmentally acceptable. Sustainable low-cost adsorbents make adsorption more appealing for DWTS to address some of the small communities' water-related issues. This review contains in-depth information on the classification and toxicity of As species and different treatment options, including ion exchange, membrane technologies, coagulation-flocculation, oxidation, and adsorption, and their effectiveness under various process parameters. Specifically, different kinetic and isotherm models were compared for As adsorption. The characterization techniques that determine various adsorbents' chemical and physical characteristics were investigated. This review discusses the parameters that impact adsorption, such as solution pH, temperature, initial As concentration, adsorbent dosage, and contact time. Finally, low-cost adsorbents application for the removal of As was discussed. Adsorption was found to be a suitable, cost-effective, and reliable technology for DWTS for small and isolated communities. New locally developed and low-cost adsorbents are promising and could support sustainable adsorption applications. [ABSTRACT FROM AUTHOR]

Beneficiation wastewater contains various types of pollutants, such as heavy metal ions and organic pollutants. In this work, a silica-based amphiphilic block copolymer, SiO2–g–PBMA–b–PDMAEMA, was obtained by surface-initiated atom transfer radical polymerization (SI-ATRP) for Cu(II) and sodium oleate adsorption in beneficiation wastewater, using butyl methacrylate (BMA) as a hydrophobic monomer and 2-(dimethylamino)ethylmethacrylate (DMAEMA) as a hydrophilic monomer. FTIR, TGA, NMR, GPC, XRD, N2 adsorption–desorption isotherms and TEM were used to characterize the structure and morphology of the hybrid adsorbent. The introduction of PBMA greatly increased the adsorption of sodium oleate on SiO2–g–PBMA–b–PDMAEMA. Adsorption kinetics showed that the adsorption of Cu(II) or sodium oleate on SiO2–g–PBMA–b–PDMAEMA fitted the pseudo-second-order model well. Adsorption isotherms of Cu(II) on SiO2–g–PBMA–b–PDMAEMA were better described by the Langmuir adsorption isotherm model, and sodium oleate on SiO2–g–PBMA–b–PDMAEMA was better described by the Freundlich adsorption isotherm model. The maximum adsorption capacity of Cu(II) and sodium oleate calculated from Langmuir adsorption isotherm equation reached 448.43 mg·g−1 and 129.03 mg·g−1, respectively. Chelation and complexation were considered as the main driving forces of Cu(II) adsorption, and the van der Waals force as well as weak hydrogen bonds were considered the main driving forces of sodium oleate adsorption. The adsorbent was recyclable and showed excellent multicomponent adsorption for Cu(II) and sodium oleate in the mixed solution. SiO2–g–PBMA–b–PDMAEMA represents a satisfying adsorption material for the removal of heavy metal ions and organic pollutants in beneficiation wastewater. [ABSTRACT FROM AUTHOR]

Although both beryllium and its compounds display high toxicity, little attention has been focused on the removal of beryllium from wastewaters. In this research, magnetically modified biochar obtained from poor-quality wheat with two distinct FexOy contents was studied as a sorbent for the elimination of beryllium from an aqueous solution. The determined elimination efficiency was higher than 80% in both prepared composites, and the presence of FexOy did not affect the sorption properties. The experimental qmax values were determined to be 1.44 mg/g for original biochar and biochar with lower content of iron and 1.45 mg/g for the biochar with higher iron content. The optimum pH values favorable for sorption were determined to be 6. After the sorption procedure, the sorbent was still magnetically active enough to be removed from the solution by a magnet. Using magnetically modified sorbents proved to be an easy to apply, low-cost, and effective technique. [ABSTRACT FROM AUTHOR]

This work concerns the content of selected heavy metals (Cd, Cr, Cu, Ni, Pb, and Zn), and determines the effect of absolute altitude on the content of metals in the plants of the Tatra National Park (TNP). The metals were determined in two species of plants, i.e., in the moss (Pleurozium schreberi (Willd.) Mitten) and in the Norway spruce (Picea abies (L.) H. Karst). Plant samples were collected in two test areas every 100 m of the altitude of the area, starting from 1000 m above sea level in the Lake Morskie Oko test area and from 1100 m above sea level in the Kasprowy Wierch test area, and ending at 1400 m above sea level for Lake Morskie Oko, and 1750 m above sea level (the moss) and 1550 m above sea level (the spruce) for Kasprowy Wierch. The two test areas are different from each other in terms of natural and physico-geographical conditions (geological structure, landform, climatic conditions). The conducted research showed that both plant species accumulated greater amounts of heavy metals in the Lake Morskie Oko test area than in the Kasprowy Wierch test area. The moss accumulated higher values of metals compared to the spruce. In both the moss and the spruce, the highest values, exceeding the natural content, were found for Cr, Pb, Cd, and Ni. For these metals, natural values were significantly exceeded: 20 times for Cr; 10 times for Pb; 4 times for Cd; and 3 times for Ni. For both examined areas, an increase in the quantity of accumulated metals in plants was also observed with the increase in altitude. The work focuses on the spreading around of heavy metals and their deposition on plants in protected high mountain (alpine) areas, in connection with altitude. Based on the obtained research results, Spearman's and Kendall's rank correlations were performed, and showed statistically significant relationships between the values for the content of metals and altitude. There are no heavy metal emission sources in the study area, so it is assumed that the metal content in the plants of the TNP is affected by long-range emissions. [ABSTRACT FROM AUTHOR]

Hydrothermally altered rocks generated from underground/tunnel projects often produce acidic leachate and release heavy metals and toxic metalloids, such as arsenic (As). The adsorption layer and immobilization methods using natural adsorbents or immobilizer as reasonable countermeasures have been proposed. In this study, two sets of column experiments were conducted, of which one was focused on the laboratory columns and other on the in situ columns, to evaluate the effects of column conditions on leaching of As from excavated rocks and on adsorption or immobilization behavior of As by a river sediment (RS) as a natural adsorbent or immobilizer. A bottom adsorption layer consisting of the RS was constructed under the excavated rock layer or a mixing layer of the excavated rock and river sediment was packed in the column. The results showed that no significant trends in the adsorption and immobilization of As by the RS were observed by comparing laboratory and in situ column experiments because the experimental conditions did not influence significant change in the leachate pH which affects As adsorption or immobilization. However, As leaching concentrations of the in situ experiments were higher than those of the laboratory column experiments. In addition, the lower pH, higher Eh and higher coexisting sulfate ions of the leachate were observed for the in situ columns, compared to the results of the laboratory columns. These results indicate that the leaching concentration of As became higher in the in situ columns, resulting in higher oxidation of sulfide minerals in the rock. This may be due to the differences in conditions, such as temperature and water content, which induce the differences in the rate of oxidation of minerals contained in the rock. On the other hand, since the leachate pH affecting As adsorption or immobilization was not influenced significantly, As adsorption or immobilization effect by the RS were effective for both laboratory and in situ column experiments. These results indicate that both in situ and laboratory column experiments are useful in evaluating leaching and adsorption of As by natural adsorbents, despite the fact that the water content which directly affects the rate of oxidation is sensitive to weathering conditions. [ABSTRACT FROM AUTHOR]

Plants' ability to take up silicon from the soil, accumulate it within their tissues and then reincorporate it into the soil through litter creates an intricate network of feedback mechanisms in ecosystems. Here, we provide a concise review of silicon's roles in soil chemistry and physics and in plant physiology and ecology, focusing on the processes that form these feedback mechanisms. Through this review and analysis, we demonstrate how this feedback network drives ecosystem processes and affects ecosystem functioning. Consequently, we show that Si uptake and accumulation by plants is involved in several ecosystem services like soil appropriation, biomass supply, and carbon sequestration. Considering the demand for food of an increasing global population and the challenges of climate change, a detailed understanding of the underlying processes of these ecosystem services is of prime importance. Silicon and its role in ecosystem functioning and services thus should be the main focus of future research. [ABSTRACT FROM AUTHOR]

New research applications involving the use of cellulosic material derived from maize stalk for on-site treatment of leachate were evaluated for specific removal of Cu(II) and Fe(III) from real, highly polluted tailing pond and mine wastewater samples. Two major issues generated by anthropic mining activities were also tackled: wastewater metal content decrease to improve water quality and subsequently metal specific recovery, increasing the economic efficiency of metal production by using a green technology for residual management. Rapid saturation of the maize stalk mass determined in batch studies and the mine pilot experiment led to diminished metal concentrations in the second pilot experiment, where Cu(II) and Pb(II) from synthetic solutions were monitored in order to test biomaterial performances. In addition, in the second pilot experiment, maize stalk removed Pb(II) in the first 36 h, below the determination limit of the analytical method. The biomaterial bed in the column was saturated after 252 h of inflow solution. FTIR-ATR, TG and SEM techniques probed the interaction between maize stalk polar groups C=O, –OH, C–O and tailing water metallic ions by large FTIR band displacements, intensity decrease and shape changes, modification of thermal stability and by changes in the appearance of adsorbent microstructure images owing mainly to ion exchange mechanism. [ABSTRACT FROM AUTHOR]

Silicon (Si) speciation and availability in soils is highly important for ecosystem functioning, because Si is a beneficial element for plant growth. Si chemistry is highly complex compared to other elements in soils, because Si reaction rates are relatively slow and dependent on Si species. Consequently, we review the occurrence of different Si species in soil solution and their changes by polymerization, depolymerization, and condensation in relation to important soil processes. We show that an argumentation based on thermodynamic endmembers of Si dependent processes, as currently done, is often difficult, because some reactions such as mineral crystallization require months to years (sometimes even centuries or millennia). Furthermore, we give an overview of Si reactions in soil solution and the predominance of certain solid compounds, which is a neglected but important parameter controlling the availability, reactivity, and function of Si in soils. We further discuss the drivers of soil Si cycling and how humans interfere with these processes. The soil Si cycle is of major importance for ecosystem functioning; therefore, a deeper understanding of drivers of Si cycling (e.g., predominant speciation), human disturbances and the implication for important soil properties (water storage, nutrient availability, and micro aggregate stability) is of fundamental relevance. [ABSTRACT FROM AUTHOR]

This paper presents the content of selected heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the soils of the Tatra National Park (TNP). In order to determine the anthropogenic impact on the environment, the following coefficients were calculated: enrichment factors (EF), geoaccumulation index (Igeo), contamination factor (Cf), degree of contamination (Cd), and modified degree of contamination (mCd). It turned out that in the Kasprowy Wierch and Lake Morskie Oko test areas, the content of metals in the soil decreases with the increasing altitude above sea level. In both regions, the highest concentrations of cadmium and lead were found, for which the coefficients indicated significant environmental pollution. These metals, since they persist in the atmosphere for a long time and have a small particle diameter, can be moved over long distances. Long-range emission contributes to environmental contamination on a global scale. Under the influence of such emissions, even protected areas such as the Tatra National Park, considered to be of natural value, are exposed to the effects of human activities (industry in general, automotive industry in particular). [ABSTRACT FROM AUTHOR]

Phragmites australis (common reed) is one of the most extensively distributed species of emergent plant worldwide. The adaptive features of this plant show its competitive character. Owing to high intraspecific diversity of common reed, as well as its phenotypic plasticity, the plant shows a broad ecological amplitude. Moreover, the plant exhibits a high capacity for acclimatization to environmental conditions which are considered adverse. This plant has been used for many years in phytoremediation to purify various types of wastewater. Phragmites australis has a high ability to accumulate various nutrients, heavy metals, and micropollutants, and in this respect, it is superior to other aquatic plants. This review examines the existing literature on the biological and ecological properties of common reed, the use of common reed in wastewater treatment for removing pollutants and tolerance for metals, and in hydrophyte treatment systems. It seems vital to conduct further research on the physiology and biochemistry of the common reed, with the aim of increasing the plant's efficiency for pollutants removal. [ABSTRACT FROM AUTHOR]

There are about 100 sites of acid mine drainage (AMD) from abandoned/closed mines in Japan. For their sustainable treatment, future prediction of AMD quantity is crucial. In this study, AMD quantity was predicted for two closed mines in Japan based on a series tank model in three stages. The tank model parameters were determined from the relationship between the observed AMD quantity and the inflow of rainfall and snowmelt by using the Kalman filter and particle swarm optimization methods. The Automated Meteorological Data Acquisition System (AMeDAS) data of rainfall were corrected for elevation and by the statistical daily fluctuation model. The snowmelt was estimated from the AMeDAS data of rainfall, temperature, and sunshine duration by using mass and heat balance of snow. Fitting with one year of daily data was sufficient to obtain the AMD quantity model. Future AMD quantity was predicted by the constructed model using the forecast data of rainfall and temperature proposed by the Max Planck Institute–Earth System Model (MPI–ESM), based on the Intergovernmental Panel on Climate Change (IPCC) representative concentration pathway (RCP) 2.6 and RCP8.5 scenarios. The results showed that global warming causes an increase in the quantity and fluctuation of AMD, especially for large reservoirs and residence time of AMD. There is a concern that for mines with large AMD quantities, AMD treatment will be unstable due to future global warming. [ABSTRACT FROM AUTHOR]