Search

Non‐centrifugal sugars (NCS) are traditionally consumed sweeteners which are gaining momentum in the global market due to the presence of nutritional and mineral content. Traditionally NCS is produced by concentrating sugarcane juices in an open pan evaporation process using dried bagasse as a fuel. Field trials at the traditional production site of NCS showed the energy efficiency as low as 8%–10%. Moreover, the effective bagasse consumption as a fuel stands at 7–8 kg/kg NCS production, whereas, as per stoichiometry and theoretical calculations, the actual bagasse consumption required for the production of NCS is a mere 0.65 kg/kg NCS production. Hence, as an alternative to the existing process, the concentration of cane juices by steam‐controlled evaporation has been studied and it has been found that the steam‐controlled evaporation can enhance the energy efficiency to 78%–83% with an effective bagasse consumption of 1.05 ± 0.04 kg/kg NCS production. [ABSTRACT FROM AUTHOR]

In this milieu, ozone technology has emerged as an avant-garde non-thermal mode of disinfection with potential applications in the food industry. This eco-friendly technology has a comprehendible adeptness in replacing alternative chemical sanitizers and is recognized as a generally safe disinfectant for fruits and vegetables. Several researchers have been focusing on the biochemical impacts of ozone on different quantitative and qualitative aspects of fruits and vegetables. A collection of those works is presented in this review highlighting the effect of ozone on the functional, antioxidant, and rheological properties of food. This can be a benevolent tool for discovering the processing states of ozone applications and ensuing influence on safety and quality attributes of previously studied foods and opening further research areas. It extends shelf life and never leaves any harmful residues on the product since it decomposes to form oxygen. It was seen that the impact on a specific property of food was dependent on the ozone concentration and treatment time, and the adverse effects of ozone exposure can be alleviated once the processing conditions are optimized. The present review can be used as a baseline for designing different food processing operations involving ozone. [ABSTRACT FROM AUTHOR]

The jackfruit is the largest edible fruit but remains underutilized due to challenges such as sticky latex, labor-intensive peeling/coring, and lack of mechanization. This study developed and evaluated a jackfruit peeling, coring, and cutting machine to enhance processing efficiency. Performance was modeled using response surface methodology (RSM) and artificial neural network (ANN). Three jackfruit sizes (small, medium, and large) and three machine speeds (90, 120, and 150 RPM) were evaluated for peeling time (26.1–50.3 s), peeling efficiency (71.6%–85.3%), coring time (15.5–29.9 s), coring efficiency (74.7%–96.0%), and bulb wastage (6.2%–17.6%). RSM showed high model adequacy (R² ≥ 0.97) and ANN confirmed prediction reliability (R² = 0.81–0.99; mean square error = 4.4–44.9). Increasing fruit size significantly increased peeling and coring times but decreased efficiencies. Machine speeds caused minor variations. Optimized conditions of 120 RPM fruit holder speed and 150 RPM corer speed gave maximum desirability (0.869). The machine had a payback period of 2 years and benefit–cost ratio of 2.32 versus 2.66 for manual peeling/coring. The mechanized jackfruit processing will promote enhanced utilization of this nutritious fruit.Practical applications The mechanized jackfruit peeling-coring-cutting machine developed in this study has significant practical utility. By enabling efficient and rapid processing of jackfruits, the machine can help tap the underutilized potential of this highly nutritious and functionally beneficial fruit. The optimized machine parameters allow jackfruit processing industries to achieve higher throughput with reduced wastage, thereby boosting productivity and profits. Additionally, the mechanization facilitates value-addition by enabling jackfruit utilization in various processed products like chips, flour, jam, etc. Further, the machine helps create livelihood opportunities in jackfruit value chains, as it reduces drudgery and enhances process efficiency as compared to manual methods. The simple fabrication and operation also enable adoption by farmer-producer organizations, self-help groups, and community-based jackfruit processing enterprises. Overall, the mechanized solution provides an impetus for sustainable utilization of jackfruit, while also addressing issues like food loss, nutrition security, income support, and women empowerment. The practical insights on machine performance modeling using response surface methodology and artificial neural network approaches further facilitate quality improvements in equipment design. [ABSTRACT FROM AUTHOR]

The vacuum impregnation (VI) process parameters (vacuum pressure = 20–60 kPa; VI temperature = 35–55°C; concentration of the sucrose solution = 40–60 °Brix; and vacuum process time = 8–24 min) for pineapple rings were optimized based on the moisture content (MC), water loss (WL), solids gain (SG), yellowness index (YI), and total soluble solids (TSS) content of pineapple rings using response surface methodology (RSM). A relationship was developed between the process and response variables using RSM and artificial neural network (ANN) techniques. The effectiveness of VI was evaluated by comparing it with the osmotic dehydration (OD) technique. The optimum condition was found to be 31.782 kPa vacuum pressure, 50.441°C solution temperature, and 60 °Brix sucrose concentration for 20.068 min to attain maximum TSS, YI, SG, and WL, and minimum MC of pineapple rings. The R2 values of RSM models for all variables varied between 0.70 and 0.91, whereas mean square error values varied between 0.76 and 71.58 and for ANN models varied between 0.87–0.93 and 0.53–193.78, respectively. Scanning electron micrographs (SEM) revealed that parenchymal cell rupture was less in VI than in OD. The VI pineapple rings exhibited more pores and high SG, as compared to OD, due to the pressure impregnation. Spectroscopic analysis affirmed that the stretching vibrations of intermolecular and intramolecular interactions were significant in VI as against OD. The VI reduced the drying time by 35% compared to OD, with the highest overall acceptability score and lower microbial load during storage. Practical Application: Pineapple is a perishable fruit, which necessitates processing for extended shelf life. This study highlights the potential of the vacuum impregnation process as a promising alternative to conventional preservation methods such as osmotic dehydration for pineapples. [ABSTRACT FROM AUTHOR]

At the beginning of the 21st century, many consumers show interest in purchasing safe, healthy, and nutritious foods. The intent requirement of end-users and many food product manufacturers are trying to feature a new processing technique for the healthy food supply. The non-thermal nature of cold plasma treatment is one of the leading breakthrough technologies for several food processing applications. The beneficial response of cold plasma processing on food quality characteristics is widely accepted as a substitution technique for new food manufacturing practices. This review aims to elaborate and offer crispy innovative ideas on cold plasma application in various food processing channels. It highlights the scientific approaches on the principle of generation and mechanism of cold plasma treatment on rheological properties of foods. It provides an overview of the behavior of cold plasma in terms of viscosity, crystallization, gelatinization, shear stress, and shear rate. Research reports highlighted that the cold plasma treated samples demonstrated a pseudoplastic behavior. The published literatures indicated that the cold plasma is a potential technology for modification of native starch to obtain desirable rheological properties. The adaptability and environmentally friendly nature of non-thermal cold plasma processing provide exclusive advantages compared to the traditional processing technique. [ABSTRACT FROM AUTHOR]

Aflatoxins are the most toxic natural mycotoxins discovered so far, posing a serious menace to the food safety and trading economy of the world, especially developing countries. How to effectively detoxify has persistently occupied a place on the list of "global hot‐point" concerns. Among the developed detoxification methods, physical methods, as the authoritative techniques for aflatoxins degradation, could rapidly induce irreversible denaturation of aflatoxins. This review presents a brief overview of aflatoxins detection and degradation product structure identification methods. Four main safety evaluation methods for aflatoxins and degradation product toxicity assessment are highlighted combined with an update on research of aflatoxins decontamination in the last decade. Furthermore, the latest applications, degradation mechanisms and products of physical aflatoxin decontamination techniques including microwave heating, irradiation, pulsed light, cold plasma and ultrasound are discussed in detail. Regulatory issues related to "detoxification" are also explained. Finally, we put forward the challenges and future work in studying aflatoxin degradation based on the existing research. The purpose of supplying this information is to help researchers have a deeper understanding on the degradation of aflatoxins, break through the existing bottleneck, and further improve and innovate the detoxification methods of aflatoxins. [ABSTRACT FROM AUTHOR]

Broken rice is an underutilized by‐product of the rice milling industry. It was added with green gram and barnyard millet to investigate as a source of nutrition‐based value‐added food product. The study was carried out to examine the influence of formulated composite flour obtained from broken rice (Oryza sativa) (50%–80%), barnyard millet (Echinochloa esculenta) (10%–30%), and green gram (Vigna radiata) (10%–30%) on the chemical properties, functional properties, pasting properties, oscillatory test, flour behavior, and microstructure of extrudate. The ash, crude fiber, crude protein, fat, and carbohydrate of the extrudate ranged from 1.62%–1.78%, 1.88%–2.43%, 13.47%–14.57%, 4.9%–7.48%, and 66.86%–70.8%, respectively. The water absorption index (WAI) and water solubility index (WSI) for the flour ranged from 5.06%–6.18 g/g and 2.34%–3.99%. The formulated composite flours having a higher percentage of broken rice showed significant differences (p < 0.05) in their pasting properties, pasting temperature, peak viscosity, breakdown viscosity, and setback and final viscosity. The pasting properties gave better results using a twin‐screw extruder with operating conditions of barrel temperature of 110°C, screw speed of 290 rpm, and 14% moisture content (w.b.). The microstructure of the extrudate obtained from 80% broken rice, 10% barnyard millet, and 10% green gram grits flour possessed a more integrated, well‐defined porosity, indicating a completely gelatinized structure. Practical application: Determination of biochemical, structural, and rheological properties of ingredients are essential for the production desirable ready‐to‐eat snacks. In this context, the present study evaluated the functional and rheological properties of broken rice–barnyard millet–green gram blend for the production of nutritious snacks with desirable physical and textural properties. The findings of the study would be useful for food products industries using millets and broken rice as a major raw material. [ABSTRACT FROM AUTHOR]

Demand for natural fibers as an alternative to synthetic fibers is on the rise. Constraints of current fiber extraction units are limited to single raw material and has low energy efficiency. Hence, this study was taken up for the design and development of a multiple fiber extractor, modelling and optimization of the machine operating parameters, and economic analysis of the developed prototype. The designed machine operates based on the raspador principle. Box Behnken design (BBD) and artificial neural network (ANN) were used to evaluate the performance and optimize the variables of the designed multiple fiber extractor. The input variables included roller speed (550, 735, and 920 rpm), gap/clearance of the roller (2, 3, and 4 mm) and the pitch/distance between the spline slots (0.5, 1.5, and 2.5 mm), while the output variables were yield (kg), capacity (kg/h), energy consumption (kJ), and efficiency (%).The prediction accuracy of quadratic models (R2 = 0.962–0.985) developed in BBD were better than the ANN models (R2 = 0.831–0.946). The optimized combination was found to be 714.23 rpm roller speed, 3.12 mm gap, and 1.49 mm pitch of the blade, which yielded (1.48 kg) a desirability value of 0.95. The XRD results indicated the highest crystallinity index was recorded for Pineapple leaf fiber compared to banana fiber. SEM results revealed that extracted BF having typical network structure (cellulose, hemicellulose, lignin, and waxes) compared to smooth PLF (lignin and hemicellulose). The fibers extracted using the developed machine was utilized for making biodegradable cutlery. Practical Applications: This study was taken up to design a multifiber extractor, to extract fibers from agricultural residues after their useful parts are taken for consumption or processing. Thus, a single machine capable of handling multiple byproducts can utilize those residues, which were previously discarded as waste. Moreover, the extracted fibers are used for the manufacture of biodegradable cutlery. With a small investment, this machine can provide an additional income to the farmers, along with taking away the concern regarding waste disposal. [ABSTRACT FROM AUTHOR]

Texture is an important sensory attribute that drives consumer acceptance of any food material. In recent times consumers' demand for high‐quality food urges food industries to provide food with consistent textural properties. However, texture measurement not just requires a trained sensory panel but also a considerable amount of time and effort. On the flip side, human observation could be subjective hence repeatability of the result may not be ensured and/or relied on. Contrary to that, objective methods for texture measurement are reliable and consistent, but are not suitable for in‐line application and also destructive in nature. The mentioned crisis has made industries opt for nondestructive texture analysis techniques. In the past decade, considerable research has been carried out on nondestructive texture analysis methods such as micro‐deformation, and acoustic and optical techniques, showing feasibility for in‐line applications. The current review focuses on the working principles and most recent applications of nondestructive techniques for texture analysis of food products. Moreover, a detailed review of contact and noncontact‐type texture measurement has been presented in this article. The literature survey is concluded with future research aspects and challenges involved in the commercialization of the nondestructive texture analysis techniques. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Classical methods for assessing the quality of food grains are still in vogue, however, these methods are either destructive or time-consuming which demands an alternative. Spectroscopic techniques such as Fourier transform-infrared (FT-IR), Near-infrared (NIR) and Raman spectroscopic techniques are intensively researched in evaluating their efficiency for determining the end-quality of grains and grain-based products. The present review focuses on the working principle of these techniques and their recent applications in grain industry, including authentication and quality discrimination, adulterant and contaminant determination, process optimization, and production monitoring. Furthermore, the challenges, limitations, and advantages along with future trends are also highlighted. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The post‐harvest unit operations of onion umbels are being carried out manually. To mechanize this process, the present study was carried out to develop an onion umbels thresher. The developed machine works on the principle of abrasive and impact actions from rasp bars. Thresher performance was evaluated at different numbers of rasp bars (2, 3, 4, and 8 numbers), feed rates (25 ± 1, 30 ± 1, and 35 ± 1 kg/h), concave clearance (6.5 and 7.5 mm), and peripheral speeds (2.5 and 3.3 m/s). At 35 ± 1 kg/h feed rate, 2 numbers of rasp bars, 7.5 mm concave clearance, and 2.5 m/s peripheral speed recorded higher threshing efficiency (97.82%) and lower seed damage (2.08%). The parameters such as the number of rasp bars on the threshing cylinder, peripheral speeds, concave clearances, and feed rates recorded significant effect (p < 0.01) on threshing efficiency and seed damage. Practical Applications: The manual onion seed extraction process such as beating with sticks, cleaning of threshed onion umbels by manual sieving than further cleaning by dipping in water, sun drying, and packaging is tedious and requires 6–8 days for completing all associated unit operations. Onion umbels are subjected to impact force leading to damage of the seeds, which affects the germination rate and lower vigor index. In this context, mechanization of the onion umbels threshing process is imperative to maintain the quality of the seed. [ABSTRACT FROM AUTHOR]

Understanding the temperature profile of different packaging materials would be useful for selecting appropriate packaging material for in‐bottle pasteurization. The temperature profile of polypropylene, polyethylene (PE), and polyethylene terephthalate bottles was investigated using COMSOL Multiphysics software to understand the temperature–time correlation with thermal treatments. PE bottles exhibited the least temperature difference between cold and hot spots. Optimization of thermal treatment processing parameters such as temperature (80–95°C) and treatment time (5–15 min) for inactivation of enzymes, namely polyphenol oxidase (PPO) and peroxidase (POD), in tender coconut water (TCW) was performed to the extent its shelf life. The quality parameters of heat‐treated TCW such as pH, total soluble solids (TSS), titratable acidity (TA), turbidity, phenolic content, PPO, POD, and sensory evaluation were analyzed. The multiple linear regression models were developed for each quality parameter using a central composite design (CCD). The optimized treatment conditions were 84°C temperature and 5 min treatment time with the desirability of 0.926. The responses recorded were pH = 5.4, TSS = 5.52, turbidity = 7.1 NTU, TA = 0.06% of malic acid, relative PPO = 0.099, relative POD = 0.093, phenolic content = 44.712 mg gallic acid equivalent/L, and overall acceptability score = 8. Practical Applications: Understanding the temperature profile of different packaging materials during pasteurization or sterilization is imperative to select the suitable packaging material, and also it would be helpful for designing the heating system. Tender coconut water (TCW) is the most popular natural drink in Asian countries. However, the pasteurization conditions are yet to be optimized to preserve TCW without affecting its bioactive and functional components. The current practice followed for in‐bottle sterilization of TCW is polyethylene terephthalate (PET). This is due to PET being cheaper and readily available than other packaging materials. However, the quality of the TCW could affect PET due to improper heat distribution which can lead to damage of bioactive components. The present study has optimized the suitable pasteurization conditions and packaging material for bottling and marketing TCW. The findings of the present study will boost the market potential of the tender coconut processing industries. [ABSTRACT FROM AUTHOR]

Demand for healthy, safe, and high‐quality foods and disadvantages of thermal processing methods such as quality losses supported the improvement of the novel, affordable, and quick nonthermal food preservation techniques such as UV light. UV‐C light (200–280 nm) radiation is an emerging technology for the disinfection of pathogen microorganisms, increasing the shelf life of foods, and used for pasteurization, surface sterilization, cleaning of equipment and water, and so on. Sensory perceptions of foods are effective on the consumer choice, acceptability, and consumption of foods. Rheology term, which also includes texture and mouthfeel, is primarily important for sensory perception, processing of foods, and shelf stability. Therefore, the determination of the effect of different processing methods on the textural and rheological properties of the food products is important. Rheological and textural changes generally occur in the surface of UV‐C‐irradiated samples due to the low penetration of UV‐C light. The UV light treatment may cause internal disruption of cell membranes, which in turn cause loss of turgidity, weaken the cell walls, and contraction of tissues, which are related to the changes in the textural and rheological properties of foods. The present review focuses on the effect of UV‐C radiation on the rheology and textural properties of food products. [ABSTRACT FROM AUTHOR]

The demand for the production of high quality and safe food products has been ever increasing. Consequently, the industry is looking for novel technologies in food processing operations that are cost‐effective, rapid and have a better efficiency over traditional methods. Ultrasound is well‐known technology to enhance the rate of heat and mass transfer providing a high end‐product quality, at just a fraction of time and energy normally required for conventional methods. The irradiation of foods with ultrasound creates acoustic cavitation that has been used to cause desirable changes in the treated products. The technology is being successfully used in various unit operations such as sterilization, pasteurization, extraction, drying, emulsification, degassing, enhancing oxidation, thawing, freezing and crystallization, brining, pickling, foaming and rehydration, and so forth. However, the high pressure and temperature associated with the cavitation process is expected to induce some changes in the textural and rheological properties of foods which form an important aspect of product quality in terms of consumer acceptability. The present review is aimed to focus on the effects of ultrasound processing on the textural and rheological properties of food products and how these properties are influenced by the process variables. [ABSTRACT FROM AUTHOR]

The food industries are looking for potential preservation methods for fruits and vegetables. The combination of osmosis and drying has proved the efficient method to improve the food quality. Osmotic dehydration is a mass transfer process in which water molecules from the food move to an osmo‐active solution and the solutes from the solution migrate into the food. Advanced osmotic dehydration techniques such as electric field pulse treatment, ultrasonic and microwave‐assisted dehydration, pulsed vacuum, and osmodehydrofreezing can improve the nutritional quality (bioactive) and sensory properties (color, texture, aroma, flavor) of fresh and cut‐fruits without changing their reliability. Emerging osmotic dehydration technologies can preserve the structure of fruit tissue by forming microscopic channels and increasing effective water diffusivity. However, it is important to analyze the effect of advanced osmotic dehydration techniques on the quality of food products to understand the industrial scalability of these techniques. The present paper discusses the impact of recent osmotic dehydration techniques on bioactive, antioxidant capacity, color, and sensory profile of food. [ABSTRACT FROM AUTHOR]

Electromagnetic waves are frequently used for food processing with commercial or domestic type microwave ovens at present. Microwaves cause molecular movement by the migration of ionic particles or rotation of dipolar particles. Considering the potential applications of microwave technique in food industry, it is seen that microwaves have many advantages such as saving time, better final product quality (more taste, color, and nutritional value), and rapid heat generation. Although microwave treatment used for food processing with developing technologies have a positive effect in terms of time, energy, or nutrient value, it is also very important to what extent they affect the textural properties of the food that they apply to. For this purpose, in this study, it has been investigated that the effects of commonly used microwave treatments such as drying, heating, baking, cooking, thawing, toasting, blanching, frying, and sterilization on the textural properties of food. In addition, this study has also covered the challenges of microwave treatments and future work. In conclusion, microwave treatments cause energy saving due to a short processing time. Therefore, it can be said that it affects the textural properties positively. However, it is important that the microwave processing conditions used are chosen appropriately for each food material. [ABSTRACT FROM AUTHOR]

Foam‐mat drying is an alternative dehydration technique to tray, drum, freeze, and spray drying. Foam‐mat drying can be used to obtain high‐quality powders from fruit juices and other heat‐sensitive food products which are difficult to dry using traditional drying techniques. In foam‐mat drying, the product to be dried is first converted into a stable foam by whipping, bubbling, or shaking in the presence of a foaming agent and foam stabilizer. The foam has been significantly increased the surface area of the product and thereby decreasing the time, temperature, and cost needed for drying. The selection of a foaming agent, foam stabilizer, foaming technique, and drying method is crucial in determining the final quality of the dried product. Due to its simplicity, faster drying, cost‐effectiveness, and improved product quality, foam‐mat drying is getting attention from researchers and industrialists worldwide. In this context, this review aims to present an overview of the recent advances in foam‐mat drying along with its cost economics and industrial potential. [ABSTRACT FROM AUTHOR]

Jackfruit (Artocarpus Heterophyllus Lam.) is an underexploited seasonal fruit that is rich in vitamins, minerals, proteins, and carbohydrates. Its commercialization and storage are limited due to its highly perishable nature. At the same time, operations such as peeling, cutting, and coring operations are difficult to perform manually. This review sums up the recent development in the area of novel thermal and nonthermal processing techniques such as retort pouch processing, microwave processing, irradiation, high‐pressure processing (HPP), pulsed electric field technology, ultrasound, supercritical fluid extraction, cold freezing, hurdle technology, and minimal processing were discussed to preserve and processed jackfruit. The impact of different processing techniques on jackfruit's quality, sensory characteristics, and storage period was also demonstrated. Industrial challenges and their prospects are also explicated for entrepreneur beneficiaries. Thermal methods resulted in a more significant loss of nutrients than nonthermal methods. For better results, pooled heat treatment with nonthermal methods is effective. Ultrasonication significantly improved the quality of thermal techniques, micro‐wave treatment, and nonthermal methods. Novelty impact statement: Use of novel thermal and nonthermal methods for jackfruit processing is suggested.Combination of mild heat with nonthermal methods was more effective for jackfruit preservation.Microwave and ultrasonication are most effectively analyzed for jackfruit processing.Industrial challenges and their prospects are also explicated for entrepreneur beneficiaries. [ABSTRACT FROM AUTHOR]

Summary: Thermal processing of tender jackfruit is a promising approach to enhance its shelf life and thereby retain the health benefits associated with its inherent antioxidants and phytochemicals. This research looked at the prospective and suitability of near‐infrared reflectance (NIR) spectroscopy (900–1700 nm) to assess the biochemical properties namely ascorbic acid (AA), total flavonoid content (TFC), and total phenolic content (TPC) of thermally treated (pasteurisation and sterilisation) tender jackfruit stored under different preservatives (2% brine, 0.1% KMS, and 0.3% citric acid) for a period of 5 months. The partial least square regression (PLSR) models were developed by using both raw as well as pre‐processed spectra. The pre‐processing of spectral data diminished the prediction accuracy of models. The models developed with raw spectral data reported best prediction accuracies for AA (Rcv2 = 0.628; RMSEcv = 0.416 and RPDcv = 1.763), TFC (Rcv2 = 0.915; RMSEcv = 1.909 and RPDcv = 3.719), and TPC (Rcv2 = 0.882; RMSEcv = 0.032 and RPDcv = 3.013) as compared to models developed with pre‐processed spectral data. However, the lower prediction accuracies were observed in standard normal variate (SNV) pre‐processed data for AA (Rcv2 = 0.449; RMSEcv = 0.51), TFC (Rcv2 = 0.500; RMSEcv = 4.628), and TPC (Rcv2 = 0.396; RMSEcv = 0.072). The standard error (SEP) values of AA, TPC and TFC were almost 1.5–2 times the standard error of laboratory (SEL); this implies the developed models have excellent performance. The results obtained in the present study affirmed that NIR spectroscopy in conjunction with appropriate chemometric techniques can be used for the rapid assessment of biochemical properties of thermal processed and canned tender jackfruit during transportation and storage. [ABSTRACT FROM AUTHOR]

The application of pesticides enhances food production vastly, and it cannot be prevented; longer fresh produce is contaminated with health-threatening pesticides even though traditional processing methods can remove these pesticides from food surfaces to a certain extent; novel emerging technologies such as cold plasma, ultrasound, electrolyzed water, and pulsed electric field could more effectively dissipate the pesticide content in food without the release of toxic residual on the food surface. The present review focuses on applying emerging technologies to degrade pesticide residues in great utility in the food processing industries. This review also discusses the pesticide removal efficacy and its mechanism involved in these technologies. The oxidation principle in cold plasma is recently gaining more importance for the degradation of pesticide residue in the food processing industries. Analysis of the emerging physical processing methods indicated greater efficacy in eradicating pesticide residues during agriculture processing. Even though the technologies such as EO (99% reduction in dimethoate), ultrasound (98.96% for chlorpyrifos), and irradiation (99.8% for pesticide in aqueous solution) can achieve promising results in pesticide degradation level, the rate and inactivation highly depend on the type of equipment and processing parameters involved in different techniques, surface characteristics of produce, treatment conditions, and nature of the pesticide. Therefore, to effectively remove these health-threatening pesticides from food surfaces, it is necessary to know the process parameters and efficacy of the applied technology on various pesticides. [ABSTRACT FROM AUTHOR]

India is the largest producer of jackfruit (Artocarpus Heterophyllus Lam.) all over the world. It is an underutilized seasonal fruit rich in vitamins, minerals, proteins, and carbohydrates. A significant chunk of the jackfruit production is wasted due to a lack of postharvest technological interventions. Due to its bulky nature, thickness, and spiky skin, operations like peeling, cutting, and coring are difficult to perform manually. Recently, there is a considerable improvement in the mechanization of jackfruit postharvest processing, which helps to reduce the wastage by 80% in its production and utilization. This review summarizes the recently developed varied types of machinery, procedures, and working mechanism of various postharvest operations such as peeling, cutting, coring, bulb removal, and seed processing. Moreover, it critically evaluates and compares the machinery for each stage of unit operation involved in jackfruit processing. The development of various thermal processing techniques such as blanching, canning, boiling, and drying is also discussed in detail. However, on comparing thermal processing with other processing aids, there is always a critical nutrients loss during thermal processing. This review also finally explores the jackfruit potential for industrial application and commercialization. Practical Applications: Unit operations involving preprocessing of jackfruits such as peeling, cutting, coring, bulb removal, seed roasting, and seed dehulling remain the most tedious operation in jackfruit processing due to its irregular shape and hard surface. Manual operation of such unit operations consumes much time and causes drudgery. Hence, the development of suitable equipment for such unit operations becomes inevitable and helps make the jackfruit processing faster and more efficient. Critical analysis of various machineries for jackfruit processing will be of great use for industries to learn about various machineries used in jackfruit processing. [ABSTRACT FROM AUTHOR]

Resistance heating is unique to thermic food manufacturing applications, particularly getting popularity across the food sector. Here, a prototype ohmic heating device over a capability of 6.25 kg/hr has been developed to process fish. The developed device was used combined with PID‐controlled solar dryer, and the parameters have been optimized by using central composite rotatable design and artificial neural network (ANN). During the processing of hybrid drying (ohmic heating with solar drying), the selected input variables were voltage (160–200 V), salt concentration (0–2%), solar drying temperature (40–72°C), and loading density (109–190 g) to improve the drying rate (drying time, overall temperature, and final moisture content). The designed ohmic heater reduced the moisture in fish muscles from 348.5% (db) to 260.91% at the first stage of drying under optimum conditions (180 V ohmic voltage and 1% salt concentration) in the time interval of 165–300 s for all experiments, followed by final moisture content, which was reduced to 12.66% (db), and the overall drying rate was improved to 2.73 g/min at the second stage of solar drying during optimum conditions (72°C temperature and 0.672 cm2 load density). The R2 (determination coefficient 0.96–0.94) values, SSE (sum of square error values 0.15–025) values, and MSE (mean square values 1–8.7) were more significant for RSM than ANN. This developed resistance heating apparatus for enhancing fish drying rate and also reduced post‐harvest losses, and it is considered to be a good technology for drying the fish and making a fish powder that can be further used for value‐added product. Practical Applications: The fish comes readily digestible; on the other hand, extremely spoilable accordingly, and fish cannot be gathered for a longer time below atmosphere circumstance, leading to enormous reap as well as commercial disadvantage. The processing of fish may impede against spoiling before reaching the consumers. Dehydration becomes a more frequent also essential approach to post‐processing conservation. Fish dehydration must be promoted by farmers' stage in addition to micro‐industry scale by way of convenience to frozen food locker. Hybrid or combined drying is an attraction for its nutritive values retention, uniformity of drying, reducing the microbial load, and improving product storage properties. Therefore, the present study aimed to develop an ohmic device accompanied by solar drying for preservation of Rohu fish muscles under ambient condition. [ABSTRACT FROM AUTHOR]

The number of food frauds in coconut-based products is increasing due to higher consumer demands for these products. Rising health consciousness, public awareness and increased concerns about food safety and quality have made authorities and various other certifying agencies focus more on the authentication of coconut products. As the conventional techniques for determining the quality attributes of coconut are destructive and time-consuming, non-destructive testing methods which are accurate, rapid, and easy to perform with no detrimental sampling methods are currently gaining importance. Spectroscopic methods such as nuclear magnetic resonance (NMR), infrared (IR)spectroscopy, mid-infrared (MIR)spectroscopy, near-infrared (NIR) spectroscopy, ultraviolet-visible (UV-VIS) spectroscopy, fluorescence spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy (RS) are gaining in importance for determining the oxidative stability of coconut oil, the adulteration of oils, and the detection of harmful additives, pathogens, and toxins in coconut products and are also employed in deducing the interactions in food constituents, and microbial contaminations. The objective of this review is to provide a comprehensive analysis on the various spectroscopic techniques along with different chemometric approaches for the successful authentication and quality determination of coconut products. The manuscript was prepared by analyzing and compiling the articles that were collected from various databases such as PubMed, Google Scholar, Scopus and ScienceDirect. The spectroscopic techniques in combination with chemometrics were shown to be successful in the authentication of coconut products. RS and NMR spectroscopy techniques proved their utility and accuracy in assessing the changes in coconut oil's chemical and viscosity profile. FTIR spectroscopy was successfully utilized to analyze the oxidation levels and determine the authenticity of coconut oils. An FT-NIR-based analysis of various coconut samples confirmed the acceptable levels of accuracy in prediction. These non-destructive methods of spectroscopy offer a broad spectrum of applications in food processing industries to detect adulterants. Moreover, the combined chemometrics and spectroscopy detection method is a versatile and accurate measurement for adulterant identification. [ABSTRACT FROM AUTHOR]

The need for sustainable food production and the demand for fresh and minimally processed foods have prompted remarkable research in novel food processing technologies that ensure safe and shelf‐stable food for a large population. Long‐established techniques such as heating, drying, and freezing have been associated with nutrient loss and high energy consumption. This trend has drawn attention to the practice of employing ozone in several food applications owing to its significant disinfectant and antimicrobial efficiency. The aqueous form of ozone has been found to show greater efficacy than its gaseous form, with faster decomposition rates leaving no harmful residues. The current study presents an overview of the latest scientific literature on the properties, chemistry, and generation of aqueous ozone, emphasizing the factors affecting process efficiency. The review scrupulously focuses on food decontamination, starch modification, pesticide degradation, and seed germination effects of aqueous ozone, highlighting the optimum processing parameters and salient findings of some major studies. A brief insight into the limitations and future trends has also been presented. Aqueous ozone has been acclaimed to have the potential to cause significant changes in the food matrix that could result in constructive modifications with outcomes entirely dependent on the processing conditions. Indirect and direct reactions involving hydroxyl radical and molecular oxygen atoms, respectively, form the basis of the ozone reaction in aqueous media, providing a distinctive kind of advanced oxidation process that offers certain crucial benefits. With a shorter half‐life in water as compared to air, the rapid decomposition of aqueous ozone to oxygen, leaving no harmful residues, adds to its advantages. [ABSTRACT FROM AUTHOR]