Search

Abstract Background Two-dimensional (2D) ultrasound is well established for thyroid nodule assessment and treatment guidance. However, it is hampered by a limited field of view and observer variability that may lead to inaccurate nodule classification and treatment. To cope with these limitations, we investigated the use of real-time three-dimensional (3D) ultrasound to improve the accuracy of volume estimation and needle placement during radiofrequency ablation. We assess a new 3D matrix transducer for nodule volume estimation and image-guided radiofrequency ablation. Methods Thirty thyroid nodule phantoms with thermochromic dye underwent volume estimation and ablation guided by a 2D linear and 3D mechanically-swept array and a 3D matrix transducer. Results The 3D matrix nodule volume estimations had a lower median difference with the ground truth (0.4 mL) compared to the standard 2D approach (2.2 mL, p < 0.001) and mechanically swept 3D transducer (2.0 mL, p = 0.016). The 3D matrix-guided ablation resulted in a similar nodule ablation coverage when compared to 2D-guidance (76.7% versus 80.8%, p = 0.542). The 3D mechanically swept transducer performed worse (60.1%, p = 0.015). However, 3D matrix and 2D guidance ablations lead to a larger ablated volume outside the nodule than 3D mechanically swept (5.1 mL, 4.2 mL (p = 0.274), 0.5 mL (p < 0.001), respectively). The 3D matrix and mechanically swept approaches were faster with 80 and 72.5 s/mL ablated than 2D with 105.5 s/mL ablated. Conclusions The 3D matrix transducer estimates volumes more accurately and can facilitate accurate needle placement while reducing procedure time.

Background: The use of two-dimensional (2D) ultrasound for guiding radiofrequency ablation (RFA) of benign thyroid nodules presents limitations, including the inability to monitor the entire treatment volume and operator dependency in electrode positioning. We compared three-dimensional (3D)-guided RFA using a matrix ultrasound transducer with conventional 2D-ultrasound guidance in an anthropomorphic thyroid nodule phantom incorporated additionally with temperature-sensitive albumin., Methods: Twenty-four phantoms with 48 nodules were constructed and ablated by an experienced radiologist using either 2D- or 3D-ultrasound guidance. Postablation T2-weighted magnetic resonance imaging scans were acquired to determine the final ablation temperature distribution in the phantoms. These were used to analyze ablation parameters, such as the nodule ablation percentage. Further, additional procedure parameters, such as dominant/non-dominant hand use, were recorded., Results: Nonsignificant trends towards lower ablated volumes for both within (74.4 ± 9.1% (median ± interquartile range) versus 78.8 ± 11.8%) and outside of the nodule (0.35 ± 0.18 mL versus 0.45 ± 0.46 mL), along with lower variances in performance, were noted for the 3D-guided ablation. For the total ablation percentage, 2D-guided dominant hand ablation performed better than 2D-guided non-dominant hand ablation (81.0% versus 73.2%, p = 0.045), while there was no significant effect in the hand comparison for 3D-guided ablation., Conclusion: 3D-ultrasound-guided RFA showed no significantly different results compared to 2D guidance, while 3D ultrasound showed a reduced variance in RFA. A significant reduction in operator-ablating hand dependence was observed when using 3D guidance. Further research into the use of 3D ultrasound for RFA is warranted., Relevance Statement: Using 3D ultrasound for thyroid nodule RFA could improve the clinical outcome. A platform that creates 3D data could be used for thyroid diagnosis, therapy planning, and navigational tools., Key Points: Twenty-four in-house-developed thyroid nodule phantoms with 48 nodules were constructed. RFA was performed under 2D- or 3D-ultrasound guidance. 3D- and 2D ultrasound-guided RFAs showed comparable performance. Real-time dual-plane imaging may offer an improved overview of the ablation zone and aid electrode positioning. Dominant and non-dominant hand 3D-ultrasound-guided RFA outcomes were comparable., (© 2024. The Author(s).)

The preoperative prediction of resectability pancreatic ductal adenocarcinoma (PDAC) is challenging. This retrospective single-center study examined tumor and vessel radiomics to predict the resectability of PDAC in chemo-naïve patients. The tumor and adjacent arteries and veins were segmented in the portal-venous phase of contrast-enhanced CT scans, and radiomic features were extracted. Features were selected via stability and collinearity testing, and least absolute shrinkage and selection operator application (LASSO). Three models, using tumor features, vessel features, and a combination of both, were trained with the training set ( N = 86) to predict resectability. The results were validated with the test set ( N = 15) and compared to the multidisciplinary team's (MDT) performance. The vessel-features-only model performed best, with an AUC of 0.92 and sensitivity and specificity of 97% and 73%, respectively. Test set validation showed a sensitivity and specificity of 100% and 88%, respectively. The combined model was as good as the vessel model (AUC = 0.91), whereas the tumor model showed poor performance (AUC = 0.76). The MDT's prediction reached a sensitivity and specificity of 97% and 84% for the training set and 88% and 100% for the test set, respectively. Our clinician-independent vessel-based radiomics model can aid in predicting resectability and shows performance comparable to that of the MDT. With these encouraging results, improved, automated, and generalizable models can be developed that reduce workload and can be applied in non-expert hospitals.

Introduction: Endoscopic detection of early neoplasia in Barrett's esophagus is difficult. Computer Aided Detection (CADe) systems may assist in neoplasia detection. The aim of this study was to report the first steps in the development of a CADe system for Barrett's neoplasia and to evaluate its performance when compared with endoscopists., Methods: This CADe system was developed by a consortium, consisting of the Amsterdam University Medical Center, Eindhoven University of Technology, and 15 international hospitals. After pretraining, the system was trained and validated using 1.713 neoplastic (564 patients) and 2.707 non-dysplastic Barrett's esophagus (NDBE; 665 patients) images. Neoplastic lesions were delineated by 14 experts. The performance of the CADe system was tested on three independent test sets. Test set 1 (50 neoplastic and 150 NDBE images) contained subtle neoplastic lesions representing challenging cases and was benchmarked by 52 general endoscopists. Test set 2 (50 neoplastic and 50 NDBE images) contained a heterogeneous case-mix of neoplastic lesions, representing distribution in clinical practice. Test set 3 (50 neoplastic and 150 NDBE images) contained prospectively collected imagery. The main outcome was correct classification of the images in terms of sensitivity., Results: The sensitivity of the CADe system on test set 1 was 84%. For general endoscopists, sensitivity was 63%, corresponding to a neoplasia miss-rate of one-third of neoplastic lesions and a potential relative increase in neoplasia detection of 33% for CADe-assisted detection. The sensitivity of the CADe system on test sets 2 and 3 was 100% and 88%, respectively. The specificity of the CADe system varied for the three test sets between 64% and 66%., Conclusion: This study describes the first steps towards the establishment of an unprecedented data infrastructure for using machine learning to improve the endoscopic detection of Barrett's neoplasia. The CADe system detected neoplasia reliably and outperformed a large group of endoscopists in terms of sensitivity., (© 2023 The Authors. United European Gastroenterology Journal published by Wiley Periodicals LLC on behalf of United European Gastroenterology.)

Objectives: Different noninvasive imaging methods to predict the chance of malignancy of ovarian tumors are available. However, their predictive value is limited due to subjectivity of the reviewer. Therefore, more objective prediction models are needed. Computer-aided diagnostics (CAD) could be such a model, since it lacks bias that comes with currently used models. In this study, we evaluated the available data on CAD in predicting the chance of malignancy of ovarian tumors., Methods: We searched for all published studies investigating diagnostic accuracy of CAD based on ultrasound, CT and MRI in pre-surgical patients with an ovarian tumor compared to reference standards., Results: In thirty-one included studies, extracted features from three different imaging techniques were used in different mathematical models. All studies assessed CAD based on machine learning on ultrasound, CT scan and MRI scan images. Per imaging method, subsequently ultrasound, CT and MRI, sensitivities ranged from 40.3 to 100%; 84.6-100% and 66.7-100% and specificities ranged from 76.3-100%; 69-100% and 77.8-100%. Results could not be pooled, due to broad heterogeneity. Although the majority of studies report high performances, they are at considerable risk of overfitting due to the absence of an independent test set., Conclusion: Based on this literature review, different CAD for ultrasound, CT scans and MRI scans seem promising to aid physicians in assessing ovarian tumors through their objective and potentially cost-effective character. However, performance should be evaluated per imaging technique. Prospective and larger datasets with external validation are desired to make their results generalizable., (© 2023. The Author(s).)

Background: Two-dimensional (2D) ultrasound is well established for thyroid nodule assessment and treatment guidance. However, it is hampered by a limited field of view and observer variability that may lead to inaccurate nodule classification and treatment. To cope with these limitations, we investigated the use of real-time three-dimensional (3D) ultrasound to improve the accuracy of volume estimation and needle placement during radiofrequency ablation. We assess a new 3D matrix transducer for nodule volume estimation and image-guided radiofrequency ablation., Methods: Thirty thyroid nodule phantoms with thermochromic dye underwent volume estimation and ablation guided by a 2D linear and 3D mechanically-swept array and a 3D matrix transducer., Results: The 3D matrix nodule volume estimations had a lower median difference with the ground truth (0.4 mL) compared to the standard 2D approach (2.2 mL, p < 0.001) and mechanically swept 3D transducer (2.0 mL, p = 0.016). The 3D matrix-guided ablation resulted in a similar nodule ablation coverage when compared to 2D-guidance (76.7% versus 80.8%, p = 0.542). The 3D mechanically swept transducer performed worse (60.1%, p = 0.015). However, 3D matrix and 2D guidance ablations lead to a larger ablated volume outside the nodule than 3D mechanically swept (5.1 mL, 4.2 mL (p = 0.274), 0.5 mL (p < 0.001), respectively). The 3D matrix and mechanically swept approaches were faster with 80 and 72.5 s/mL ablated than 2D with 105.5 s/mL ablated., Conclusions: The 3D matrix transducer estimates volumes more accurately and can facilitate accurate needle placement while reducing procedure time., (© 2021. The Author(s).)

Patients suffering from Barrett's Esophagus (BE) are at an increased risk of developing esophageal adenocarcinoma and early detection is crucial for a good prognosis. To aid the endoscopists with the early detection for this preliminary stage of esophageal cancer, this work concentrates on the development and extensive evaluation of a state-of-the-art computer-aided classification and localization algorithm for dysplastic lesions in BE. To this end, we have employed a large-scale endoscopic data set, consisting of 494,355 images, in combination with a novel semi-supervised learning algorithm to pretrain several instances of the proposed neural network architecture. Next, several Barrett-specific data sets that are increasingly closer to the target domain with significantly more data compared to other related work, were used in a multi-stage transfer learning strategy. Additionally, the algorithm was evaluated on two prospectively gathered external test sets and compared against 53 medical professionals. Finally, the model was also evaluated in a live setting without interfering with the current biopsy protocol. Results from the performed experiments show that the proposed model improves on the state-of-the-art on all measured metrics. More specifically, compared to the best performing state-of-the-art model, the specificity is improved by more than 20% points while simultaneously preserving high sensitivity and reducing the false positive rate substantially. Our algorithm yields similar scores on the localization metrics, where the intersection of all experts is correctly indicated in approximately 92% of the cases. Furthermore, the live pilot study shows great performance in a clinical setting with a patient level accuracy, sensitivity, and specificity of 90%. Finally, the proposed algorithm outperforms each individual medical expert by at least 5% and the average assessor by more than 10% over all assessor groups with respect to accuracy., (Copyright © 2020 The Authors. Published by Elsevier B.V. All rights reserved.)

Computed tomography (CT) is used to diagnose many emergent medical conditions, including stroke and traumatic brain injuries. Unfortunately, the size, weight, and expense of CT systems make them largely inaccessible for patients outside of major hospitals. We have designed a module containing multiple miniature x-ray sources that could allow for CT systems to be significantly lighter, smaller, and cheaper, and to operate without any moving parts. We have developed a novel photocathode-based x-ray source, created by depositing a thin film of magnesium on an electron multiplier. When illuminated by a UV LED, this photocathode emits a beam of electrons, with a beam current of up to 1 mA. The produced electrons are accelerated through a high voltage to a tungsten target. These sources are individually addressable and can be pulsed rapidly, through electronic control of the LEDs. Seven of these sources are housed together in a 17.5 degree arc within a custom vacuum manifold. A full ring of these modules could be used for CT imaging. By pulsing the sources in series, we are able to demonstrate x-ray tomosynthesis without any moving parts. With a clinical flat-panel detector, we demonstrate 3D acquisition and reconstructions of a cadaver swine lung.

Background: Blastomycosis is a potentially fatal infection caused by the fungus Blastomyces dermatitidis. During January 1 through March 5, 2006, twenty-one laboratory confirmed cases of blastomycosis were reported among residents of an endemic area in north-central Wisconsin; a striking increase compared with previous years. The objective of the study was to determine if an observed increase in blastomycosis among residents of an urban area in north-central Wisconsin was caused by a point-source exposure and to identify its source., Methods: We compared epidemiologic features, and signs and symptoms of B. dermatitidis infection among 46 historic (1999-2005) and 21 possible outbreak case patients. In addition, a case-control study was conducted to compare risk factors of the outbreak case patients with those of 64 age, gender, and geographically-matched control subjects. We conducted site inspections, evaluated meteorological data, genetically compared outbreak and non-outbreak isolates, and attempted environmental detection of B. dermatitidis using polymerase chain reaction, in vitro isolation, and in vivo isolation by tail vein injection of mice., Results: The unusual risk profile of this outbreak included: residence within non-rural city limits with limited time spent outdoors and an equivalent gender ratio and young median age among case patients consistent with common source rather than unrelated exposures. Thirteen of fourteen outbreak-associated clinical isolates of B. dermatitidis clustered in the same genetic group by PCR-RFLP analysis. Inspections near the cluster center suggested a yard waste collection site as the probable exposure source. B. dermatitidis nucleic acid was detected in one of 19 environmental samples. Environmental and meteorological conditions and material management practices were identified that may have facilitated growth and dispersal of B. dermatitidis conidia near this residential area., Conclusions: Results of our investigation of this large non-rural outbreak of blastomycosis suggest bioaerosol hazards may exist near yard waste collection and composting facilities, especially where pine tree litter is present, in B. dermatitidis endemic areas.