Search

Your search keyword '"Stepanov, B. S."' showing total 10 results
Start Over Author "Stepanov, B. S." Search Limiters Full Text
10 results on '"Stepanov, B. S."'

3. Development of As-Se tapered suspended-core fibers for ultra-broadband mid-IR

Author

Anashkina, E. A., Shiryaev, V. S., Koptev, M. Y., Stepanov, B. S., and Muravyev, S. V.

Subjects
Physics - Optics
Abstract

We designed and developed tapered suspended-core fibers of high-purity As39Se61 glass for supercontinuum generation in the mid-IR with a standard fiber laser pump source at 2 ${\mu}$m. It was shown that microstructuring allows shifting a zero dispersion wavelength to the range shorter than 2 ${\mu}$m in the fiber waist with a core diameter of about 1 ${\mu}$m. In this case, supercontinuum generation in the 1-10 ${\mu}$m range was obtained numerically with 150-fs 100-pJ pump pulses at 2 ${\mu}$m. We also performed experiments on wavelength conversion of ultrashort optical pulses at 1.57 ${\mu}$m from Er: fiber laser system in the manufactured As-Se tapered fibers. The measured broadening spectra were in a good agreement with the ones simulated numerically., Comment: 9 pages, 10 figures. Journal of Non-Crystalline Solids (accepted for publication, 28 Jul 2017)

Published
2017
Full Text
View/download PDF

4. Numerical simulation of the Ge28Sb12Se60 fiber extrusion process.

Author

Shabarova, L. V., Stepanov, B. S., Kirillov, Y. P., Mishinov, S. V., Stepanov, A. S., Lashmanov, E. N., and Shiryaev, V. S.

Subjects
*EXTRUSION process, *MOLTEN glass, *COMPUTATIONAL fluid dynamics, *FIBERS, *COMPUTER simulation
Abstract

A computational fluid dynamics model of the glass fiber extrusion process is proposed and verified. The model describes the homogeneous non‐isothermal motion of a viscous glass melt and the surrounding air in an experimental setup, taking into account the interface between the media and the movement of the metal rod. The unclad Ge28Sb12Se60 glass fibers for sensor applications are fabricated by extrusion. The validation of the developed model is performed based on the experimental data, including pressure values, temperature field in extrusion setup, and extruded glass mass outflow. Based on the proposed model, the thermal and kinetic conditions for the flow of Ge28Sb12Se60 glass during extrusion are numerically studied. The presented model could be used as a tool for analyzing the hydrodynamic and thermal processes during fiber extrusion. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

5. Adhesion of Ge20SE80 Glass to Silica Glass, Stainless Steel with Nitrided and Non-Nitrided Surface, and Tungsten Carbide.

Author

Mishinov, S. V., Velmuzhov, A. P., Stepanov, B. S., Stepanov, A. S., and Blagin, R. D.

Subjects
GLASS construction, FUSED silica, CONSTRUCTION materials, STAINLESS steel, TUNGSTEN carbide
Abstract

The adhesion strength of the solid phase boundary in the Ge20Se80 glass–substrate (quartz glass, stainless steel, tungsten carbide) systems was measured using the normal separation method in the temperature range of 270 – 360°C. The maximum work of adhesion of chalcogenide glass among the studied structural materials was observed for stainless steel with a non-nitrided surface. The wetting and adhesion of the Ge20Se80 glass melt to structural materials in the temperature range of 370 – 470°C were investigated. The maximum adhesion of the chalcogenide melt is observed for the surface of quartz glass, while the minimum is observed for the surface of nitrided stainless steel. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

9. Adhesion Strength of the Interface between Solid Phases in the GaxGe40–xS60–Quartz Glass System.

Author

Mishinov, S. V., Tyurina, E. A., Velmuzhov, A. P., Sukhanov, M. V., Plekhovich, A. D., Stepanov, B. S., and Shiryaev, V. S.

Subjects
CHALCOGENIDE glass, FUSED silica, GLASS, GALLIUM, SOLIDS
Abstract

Using normal pull-off testing, we have studied adhesion contact strength in the GaxGe40–xS60–quartz glass system as a function of contact formation temperature, pull-off test temperature, and chalcogenide glass composition. The addition of 1 at % gallium to glass composition considerably reduces the adhesion strength. Further increasing the percentage of gallium, to 8 at %, causes only a slight drop in adhesion. The observed general relationships can be accounted for by partial glass crystallization on heating for adhesion contact formation and subsequent cooling to the pull-off test temperature. We have formulated recommendations concerning detachment of GaxGe40–xS60 glasses from the quartz reactor wall. [ABSTRACT FROM AUTHOR]

Published
2023
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results