Search

Osteoarthritis (OA) represents a group of chronic, painful, disabling conditions affecting synovial joints. It is characterized by degeneration of articular cartilage, alterations of peri-articular and subchondral bone, low-grade synovial inflammation (synovitis). Despite OA is commonly described as a non-inflammatory disease, it is known that its progression and the subsequent increment of symptoms correlate to the production of inflammatory factors that induce the secretion of enzymes responsible for cartilage degradation. In clinical practice, to alleviate pain and stiffness, not only during acute phases but also as maintenance therapy, intra-articular injections of corticosteroids or similar drugs are used, besides it is well diffused the viscosupplementation procedure based on hyaluronan gel. There are many different products containing high molecular weight linear HA or cross-linked derivatives, however the novelty in the field consist in the hybrid cooperative complexes derived from high and low molecular weight HA through a patented processing. This technique permit to double the amount of HA delivered to the injured site without increasing the injected volume, beside in vitro assay on human chondrocytes suggested hybrid complexes as effective in the modulation of several inflammatory cytokines in joints.

Chronic obstructive pulmonary disease (COPD) appears to be associated with osteoporosis. The aim of the study was to evaluate the prevalence of osteoporosis risk (OP risk) in a sample of patients with COPD. In 3030 patients (1768 men and 1262 women) aged >50 yr, we evaluated COPD severity with spirometry and OP risk by using a quantitative ultrasound device. We analyzed several risk factors for osteoporosis, such as age, gender, body mass index (BMI), fracture history, smoking status, glucocorticoid (GC) treatment in univariate and in multinomial logistic regressions. The risk of osteoporosis was higher in women and in older participants, among those with more severe COPD, treated with GC. In multivariate analysis, we found interactions between fracture history and smoking and between age and gender. Significant associations were found with BMI and GC treatment, whereas only a tendency, not statistically significant, was found for very severe COPD being associated to high risk of osteoporosis. In COPD patients the risk of osteoporosis is high, in particular at severe stages of the disease, but seems to be due to traditional risk factors, such as older age, female gender, low BMI, history of smoking and fractures, GC treatment.

With the improvement in survival rates after lung transplantation, concern has arisen about evaluating quality of life (QoL). This multicenter cross-sectional study aimed at describing QoL and identifying factors associated with it.We assessed QoL in 129 lung transplant recipients from 5 centres in Italy, during scheduled follow-up visits, using the SF-36, GHQ and St George's respiratory questionnaires (SGRQ).The SF-36 elicited impaired QoL in the physical, but not in the mental domains (PCS = 44; MCS = 53). The GHQ identified 29 patients (23%) with psychological discomfort and the SGRQ scores were significantly better than those of patients with chronic respiratory disease. On multivariate analysis, exertional dyspnea was an independent predictor of the PCS (adjusted delta -6.3 (p0.001), while osteoporosis (delta = -3.1), BOS (delta = -4.3), acute rejection (delta = -3.9) and heart and lung transplant (delta = +6.4) were only marginally associated. Dyspnea was also related to a GHQ score5.The study identified exertional dyspnea as the main determinant of QoL as measured both by SF36 (PCS) and GHQ. Other objective measures contributed only to the PCS. Thus, the SF-36 (PCS) and GHQ were useful in identifying patients who needed treatment not only for complications but also psychological support and continued physical rehabilitation.

Enhancing Streptomyces cellulase production by supplying lignocellulose biomasses has been poorly investigated so far. In this research the biosynthesis of Streptomyces roseochromogenes ATCC13400 cellulases was increased for the first time by addition of a cellulose fraction (2.5 g·L−1) to the growth medium, isolated from the marine origin Posidonia oceanica sea balls, generally called egagropili.. In shake flasks the cellulase production increased of 4.3 folds, compared to the control, up to 268 U·L−1 in 72 h, with a productivity of 3.7 U·L−1·h−1, while in batch it was further enhanced up to 347 U·L−1 in 45 h with a doubled productivity of 7.7 U·L−1·h−1 A downstream protocol was set up by coupling two ultrafiltration steps on 10 and 3 kDa membranes to recover the enzymes from the supernatant. A pool of three cellulases, having molecular weights between 115 and 47 kDa, was recovered. The optimal conditions for their enzymatic activity were 60 °C and pH 5.0, and they showed CMCase, FPase and β-glucosidase action. In conclusion, S. roseochromogenes might be considered a new cell factory for cellulase biotechnological production that might be enhanced by using the cellulose from egagropili, a well-known marine origin plant waste, as the substrate.

Posidonia oceanica (L.) Delile is the main seagrass plant in the Mediterranean basin that forms huge underwater meadows. Its leaves, when decomposed, are transported to the coasts, where they create huge banquettes that protect the beaches from sea erosion. Its roots and rhizome fragments, instead, aggregate into fibrous sea balls, called egagropili, that are shaped and accumulated by the waves along the shoreline. Their presence on the beach is generally disliked by tourists, and, thus, local communities commonly treat them as waste to remove and discard. Posidonia oceanica egagropili might represent a vegetable lignocellulose biomass to be valorized as a renewable substrate to produce added value molecules in biotechnological processes, as bio-absorbents in environmental decontamination, to prepare new bioplastics and biocomposites, or as insulating and reinforcement materials for construction and building. In this review, the structural characteristics, and the biological role of Posidonia oceanica egagropili are described, as well as their applications in different fields as reported in scientific papers published in recent years.

Second cheese whey (SCW) derived from buffalo milk is the main by-product of the mozzarella cheese dairy industry. The objective of this study was to develop a membrane-based purification procedure to obtain specific fractions from SCW and assess their biological and applicative potential. Special interest was paid to the proteins and newly identified health-promoting compounds that could be recovered and used as value-added products in different sectors of food and pharmaceutical industries. SCW has been treated, sequentially, with microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) membranes giving the possibility to obtain three different fractions, namely retentates recovered on 100 and 10 kDa (R100 and R10) and a nanofiltration retentate (RNF). These retentates were compared for their ability to preserve human keratinocytes from dehydration, to form protein-based films by casting, and finally they were used for probiotic cultivations as the main substrate. Results showed that Lactobacillus rhamnosus could grow without any further additional nutrient up to 2.2 ± 0.3 × 109 CFU/mL in the RNF medium. Dehydration tests on HaCat cells proved R100 as the most efficient fraction in preserving cell viability from this specific stress. R10, after diafiltrations, formed transparent films with improved features when glycerol was added as a plasticizer.

BDDE (1,4-butanediol-diglycidylether)-crosslinked hyaluronan (HA) hydrogels are widely used for dermo-aesthetic purposes. The rheology and stability of the gels under physiological conditions greatly affect their clinical indications and outcomes. To date, no studies investigating how these features are related to the chemistry of the polymeric network have been reported. Here, four available HA-BDDE hydrogels were studied to determine how and to what extent their rheology and stability with respect to enzymatic hydrolysis relate to the type and degree of HA structural modification. 1H-/13C-NMR analyses were associated for the quantification of the “true” HA chemical derivatization level, discriminating between HA that was effectively crosslinked by BDDE, and branched HA with BDDE that was anchored on one side. The rheology was measured conventionally and during hydration in a physiological medium. Sensitivity to bovine testicular hyaluronidase was quantified. The correlation between NMR data and gel rheology/stability was evaluated. The study indicated that (1) the gels greatly differed in the amounts of branched, crosslinked, and overall modified HA, with most of the HA being branched; (2) unexpectedly, the conventionally measured rheological properties did not correlate with the chemical data; (3) the gels’ ranking in terms of rheology was greatly affected by hydration; (4) the rheology of the hydrated gels was quantitatively correlated with the amount of crosslinked HA, whereas the correlations with the total HA modification level and with the degree of branched HA were less significant; (5) increasing HA derivatization/crosslinking over 9/3 mol% did not enhance the stability with respect to hyaluronidases. These results broaden our knowledge of these gels and provide valuable information for improving their design and characterization.

Polycaprolactone nanofibers are used as scaffolds in the field of tissue engineering for tissue regeneration or drug delivery. Polycaprolactone (PCL) is a biodegradable hydrophobic polyester used to obtain implantable nanostructures, which are clinically applicable due to their biological safety. Polydatin (PD), a glycosidic precursor of resveratrol, is known for its antioxidant, antitumor, antiosteoporotic, and bone regeneration activities. We aimed to use the osteogenic capacity of polydatin to create a biomimetic innovative and patented scaffold consisting of PCL-PD for bone tissue engineering. Both osteosarcoma cells (Saos-2) and mesenchymal stem cells (MSCs) were used to test the in vitro cytocompatibility of the PD-PCL scaffold. Reverse-phase (RP) HPLC was used to evaluate the timing release of PD from the PCL-PD nanofibers and the MTT assay, scanning electron microscopy, and alkaline phosphatase (ALP) activity were used to evaluate the proliferation, adhesion, and cellular differentiation in both osteosarcoma and human mesenchymal stem cells (MSCs) seeded on PD-PCL nanofibers. The proliferation of osteosarcoma cells (Saos-2) on the PD-PCL scaffold decreased when compared to cells grown on PLC nanofibers, whereas the proliferation of MSCs was comparable in both PCL and PD-PCL nanofibers. Noteworthy, after 14 days, the ALP activity was higher in both Saos-2 cells and MSCs cultivated on PD-PCL than on empty scaffolds. Moreover, the same cells showed a spindle-shaped morphology after 14 days when grown on PD-PCL as shown by SEM. In conclusion, we provide evidence that nanofibers appropriately coated with PD support the adhesion and promote the osteogenic differentiation of both human osteosarcoma cells and MSCs.

Since the potentialities of applications of low molecular weight poly-γ-glutamic acid (γ-PGA) chains have been so far only partially explored, the separation of diverse molecular families of them, as well as their characterization for potential bioactivity and ability to form films, were investigated. Two different approaches based on organic solvent precipitation or on ultra- and nano-filtration membrane-based purification of inexpensive commercial material were employed to obtain size-specific γ-PGA fractions, further characterized by size exclusion chromatography equipped with a triple detector array and by ultra-high-performance liquid chromatography to assess their average molecular weight and their concentration. The γ-PGA low molecular weight fractions, purified by ultra-filtration, have been shown both to counteract the desiccation and the oxidative stress of keratinocyte monolayers. In addition, they were exploited to prepare novel hydrocolloid films by both solvent casting and thermal compression, in the presence of different concentrations of glycerol used as plasticizer. These biomaterials were characterized for their hydrophilicity, thermal and mechanical properties. The hot compression led to the attainment of less resistant but more extensible films. However, in all cases, an increase in elongation at break as a function of the glycerol content was observed. Besides, the thermal analyses of hot compressed materials demonstrated that thermal stability was increased with higher γ-PGA distribution po-lymer fractions. The obtained biomaterials might be potentially useful for applications in cosmetics and as vehicle of active molecules in the pharmaceutical field.

Pharma-grade extractive chondroitin sulfate (CS) is widely used for osteoarthritis (OA) treatment. Recently, unsulfated biofermentative chondroitin (BC) proved positive effects in OA in vitro model. This study, based on primary pathological human synoviocytes, aimed to analyze, by a multiplex assay, a panel of OA-related biomarkers in response to short-term treatments with bovine (CSb), pig (CSp) and fish (CSf) chondroitins, in comparison to BC. As expected, all samples had anti-inflammatory properties, however CSb, CSf and especially BC affected more cytokines and chemokines. Based on these results and molecular weight similarity, CSf and BC were selected to further explore the synoviocytes’ response. In fact, Western blot analyses showed CSf and BC were comparable, downregulating OA-related biomarkers such as the proteins mTOR, NF-kB, PTX-3 and COMP-2. Proteomic analyses, performed by applying a nano-LC-MS/MS TMT isobaric labelling-based approach, displayed the modulation of both common and distinct molecules to chondroitin treatments. Thus, CSf and BC modulated the biological mediators involved in the inflammation cascade, matrix degradation/remodeling, glycosaminoglycans’ synthesis and cellular homeostasis. This study helps in shedding light on different molecular mechanisms related to OA disease that may be potentially affected not only by animal-source chondroitin sulfate but also by unsulfated biofermentative chondroitin.

A lignin fraction (LF) was extracted from the sea balls of Posidonia oceanica (egagropili) and extensively dialyzed and characterized by FT-IR and NMR analyses. LF resulted water soluble and exhibited a brownish-to-black color with the highest absorbance in the range of 250–400 nm, attributed to the chromophore functional groups present in the phenylpropane-based polymer. LF high-performance size exclusion chromatography analysis showed a highly represented (98.77%) species of 34.75 kDa molecular weight with a polydispersity index of 1.10 and an intrinsic viscosity of 0.15. Quantitative analysis of carbohydrates indicated that they represented 28.3% of the dry weight of the untreated egagropili fibers and 72.5% of that of LF. In particular, eight different monosaccharides were detected (fucose, arabinose, rhamnose, galactose, glucose, xylose, glucosamine and glucuronic acid), glucuronic acid (46.6%) and rhamnose (29.6%) being the most present monosaccharides in the LF. Almost all the phenol content of LF (113.85 ± 5.87 mg gallic acid eq/g of extract) was water soluble, whereas around 22% of it consisted of flavonoids and only 10% of the flavonoids consisted of anthocyanins. Therefore, LF isolated from egagropili lignocellulosic material could be defined as a water-soluble lignin/carbohydrate complex (LCC) formed by a phenol polymeric chain covalently bound to hemicellulose fragments. LCC exhibited a remarkable antioxidant activity that remained quite stable during 6 months and could be easily incorporated into a protein-based film and released from the latter overtime. These findings suggest egagropili LCC as a suitable candidate as an antioxidant additive for the reinforcement of packaging of foods with high susceptibility to be deteriorated in aerobic conditions.

Streptomyces albus J1074-pAPI (Streptomyces albus-pAPI) is a recombinant strain constructed to biotechnologically produce apigenin, a flavonoid with interesting bioactive features that up to now has been manufactured by extraction from plants with long and not environmentally friendly procedures. So far, in literature, only a maximum apigenin concentration of 80.0 µg·L−1 has been obtained in shake flasks. In this paper, three integrated fermentation strategies were exploited to enhance the apigenin production by Streptomyces albus J1074-pAPI, combining specific approaches for pre-inoculum conditions, optimization of fermentation process parameters and supplementation of precursors. Using a pre-inoculum of mycelium, the apigenin concentration increased of 1.8-fold in shake flask physiological studies. In 2L batch fermentation, the aeration and stirring conditions were optimized and integrated with the new inoculum approach and the apigenin production reached 184.8 ± 4.0 µg·L−1, with a productivity of 2.6 ± 0.1 μg·L−1·h−1. The supplementation of 1.5 mM L-tyrosine in batch fermentations allowed to obtain an apigenin production of 343.3 ± 3.0 µg·L−1 in only 48 h, with an increased productivity of 7.1 ± 0.1 μg·L−1·h−1. This work demonstrates that the optimization of fermentation process conditions is a crucial requirement to increase the apigenin concentration and productivity by up to 4.3- and 10.7-fold.

Microscale fermentation systems are important high throughput tools in clone selection, and bioprocess set up and optimization, since they provide several parallel experiments in controlled conditions of pH, temperature, agitation, and gas flow rate. In this work we evaluated the performance of biotechnologically relevant strains with different respiratory requirements in the micro‐Matrix microbioreactor. In particular Escherichia coli K4 requires well aerated fermentation conditions to improve its native production of chondroitin‐like capsular polysaccharide, a biomedically attractive polymer. Results from batch and fed‐batch experiments demonstrated high reproducibility with those obtained on 2 L reactors, although highlighting a pronounced volume loss for longer‐term experiments. Basfia succiniciproducens and Actinobacillus succinogenes need CO2 addition for the production of succinic acid, a building block with several industrial applications. Different CO2 supply modes were tested for the two strains in 24 h batch experiments and results well compared with those obtained on lab‐scale bioreactors. Overall, it was demonstrated that the micro‐Matrix is a useful scale‐down tool that is suitable for growing metabolically different strains in simple batch process, however, a series of issues should still be addressed in order to fully exploit its potential.

Background: Due to its wide range of applications in the food, pharmaceutical and chemical fields, microbial syn- thesis of succinic acid is receiving growing attention, generating already relevant industrial results, as well as fueling constant research for improvements. In order to develop a sustainable process, a special focus is now set on the exploitation and conversion of lignocellulosic biomasses into platform chemicals. Results: In the present work we used Basfia succiniciproducens BPP7 in separated hydrolysis and fermentation experi- ments with Arundo donax as starting material. Fed-batch strategies showed a maximal production of about 37 g/L of succinic acid after 43 h of growth and a productivity of 0.9 g/L h on the pilot scale. Global mass balance calculations demonstrated a hydrolysis and fermentation efficiency of about 75%. Moreover, the application of a material flow analysis showed the obtainment of 88.5 and 52 % of succinic acid, per kg of virgin biomass and on the total generated output, respectively. Conclusions: The use of fed-batch strategies for the growth of B. succiniciproducens on A. donax improved the titer and productivity of succinic acid on pre-pilot scale. Process evaluation through material flow analysis showed successful results and predicted a yield of succinic acid of about 30% in a fed-batch process that uses A. donax as only carbon source also in the feed. Preliminary considerations on the possibility to achieve an energetic valorization of the residual solid coming from the fermentation process were also carried out. Keywords: Basfia succiniciproducens, Arundo donax, Fed-batch, Succinic acid, Pre-pilot scale, Inhibition, Material flow analysis

Probiotics are living microorganisms that give beneficial health effects while consumed, and each strain possesses diverse and unique properties and also different technological characteristics that affect its ability to be produced at large scale. Limosilactobacillus fermentum is a widely studied member of probiotics, however, few data are available on the development of fermentation and downstream processes for the production of viable biomasses for potential industrial applications. In the present study a novel L. fermentum strain was isolated from buffalo milk and used as test example for biotechnological process development. The strain was able to produce up to 109 CFU/mL on a (glucose based) semi-defined medium deprived of animal-derived raw materials up to the pilot scale (150 L), demonstrating improved results compared to commonly used, although industrially not suitable, media rich of casein and beef extract. The study of strain behavior in batch experiments indicated that the highest concentration of viable cells was reached after only 8 h of growth, greatly shortening the process. Moreover, initial concentrations of glucose in the medium above 30 g/L, if not supported by higher nitrogen concentrations, reduced the yield of biomass and increased production of heterolactic fermentation by-products. Biomass concentration via microfiltration on hollow fibers, and subsequent spray-drying allowed to recover about 5.7 × 1010CFU/gpowder of viable cells, indicating strain resistance to harsh processing conditions. Overall, these data demonstrate the possibility to obtain and maintain adequate levels of viable L. fermentum cells by using a simple approach that is potentially suitable for industrial development. Moreover, since often exopolysaccharides produced by lactobacilli contribute to the strain's functionality, a partial characterization of the EPS produced by the newly identified L. fermentum strain was carried out. Finally, the effect of L. fermentum versus H. pylori in a gastric epithelial cell model was evaluated demonstrating its ability to stimulate the response of the immune system and displace the infective agent.

Gelatin hydrogels by microbial-transglutaminase crosslinking are being increasingly exploited for tissue engineering, and proved high potential in bone regeneration. This study aimed to evaluate, for the first time, the combination of enzymatically crosslinked gelatin with hyaluronan and the newly developed biotechnological chondroitin in enhancing osteogenic potential. Gelatin enzymatic crosslinking was carried out in the presence of hyaluronan or of a hyaluronan–chondroitin mixture, obtaining semi-interpenetrating gels. The latter proved lower swelling extent and improved stiffness compared to the gelatin matrix alone, whilst maintaining high stability. The heteropolysaccharides were retained for 30 days in the hydrogels, thus influencing cell response over this period. To evaluate the effect of hydrogel composition on bone regeneration, materials were seeded with human dental pulp stem cells and osteogenic differentiation was assessed. The expression of osteocalcin (OC) and osteopontin (OPN), both at gene and protein level, was evaluated at 7, 15 and 30 days of culture. Scanning electron microscopy (SEM) and two-photon microscope observations were performed to assess bone-like extracellular matrix (ECM) deposition and to observe the cell penetration depth. In the presence of the heteropolysaccharides, OC and OPN expression was upregulated and a higher degree of calcified matrix formation was observed. Combination with hyaluronan and chondroitin improved both the biophysical properties and the biological response of enzymatically crosslinked gelatin, fastening bone deposition.

Several studies suggest that inflammation has a pivotal role during the progression of osteoarthritis (OA) and cytokines have been identified as the main process mediators. This study aimed to explore the ability to modulate the main OA pro‐inflammatory biomarkers of novel gels (H‐HA/BC) based on high molecular weight hyaluronan (H‐HA) and unsulfated biotechnological chondroitin (BC). For the first time, BC was tested also in combination with H‐HA on human primary cells isolated from pathological knee joints. Specifically, the experiments were performed using an OA in vitro model based on human chondrocytes and synoviocytes. To evaluate the anti‐inflammatory effects of H‐HA/BC in comparison with H‐HA and BC single gels, NF‐kB, COMP‐2, MyD88, MMP‐13 and a wide range of cytokines, known to be specific biomarkers in OA (e.g., IL‐6, IL‐8, and TNF‐α), were evaluated. In addition, cell morphology and proliferation occurring in the presence of either H‐HA/BC or single components were assessed using time‐lapse video microscopy. It was shown that synovial fluids and cells isolated from OA suffering patients, presented a cytokine pattern respondent to an ongoing inflammation status. H‐HA and BC significantly reduced the levels of 23 biomarkers associated with cartilage damage. However, H‐HA/BC decreased significantly 24 biological mediators and downregulated 19 of them more efficiently than the single components. In synoviocytes cultures, cytokine analyses proved that H‐HA/BC gels re‐established an extracellular environment more similar to a healthy condition reducing considerably the concentration of 11 analytes. Instead, H‐HA and BC significantly modulated 7 (5 only with a longer treatment) and 8 biological cytokines, respectively. Our results suggest that H‐HA/BC beyond the viscosupplementation effect typical for HA‐based gels, can improve the inflammation status in joints and thus could be introduced as a valid protective and anti‐inflammatory intraarticular device in the field of Class III medical devices for OA treatments., Unsulfated biotechnological chondroitin by itself and complexed to hyaluronic acid counteract inflammation and improve the viability of human primary cells isolated from pathological osteoarthritis joints. Their potential efficacy, especially when combined in novel gels is supported by the modulation of several key biomarkers.

The several interesting activities detected for fucosylated chondroitin sulfate (fCS) have fueled in the last years several efforts toward the obtainment of fCS oligosaccharides and low molecular weight (LMW) polysaccharides with a well-defined structure, in order to avoid the problems associated with the potential employment of native, sea cucumber sourced fCSs as a drug. Total synthesis and controlled depolymerization of the natural fCS polysaccharides are the main approaches to this aim; nonetheless, they present some limitations. These could be circumvented by semisynthesis, a strategy relying upon the regioselective fucosylation and sulfation of a microbial sourced polysaccharide sharing the same chondroitin backbone of fCS but devoid of any fucose (Fuc) and sulfate decoration on it. This approach is highly versatile, as it could open access also to fCS isomers carrying Fuc and sulfate groups at non-natural sites. Here we prepare for the first time some structurally homogeneous fCS isomers through a multistep procedure with a glycosylation reaction between a LMW polysaccharide acceptor and three different Fuc donors as key step. The obtained products were subjected to a detailed structural characterization by 2D-NMR. The conformational behavior was also investigated by NMR and molecular dynamics simulation methods and compared with data reported for natural fCS.

Lipopolysaccharides (LPS) are surface glycoconjugates embedded in the external leaflet of the outer membrane (OM) of the Gram-negative bacteria. They consist of three regions: lipid A, core oligosaccharide (OS), and O-specific polysaccharide or O-antigen. Lipid A is the glycolipid endotoxin domain that anchors the LPS molecule to the OM, and therefore, its chemical structure is crucial in the maintenance of membrane integrity in the Gram-negative bacteria. In this paper, we reported the characterization of the lipid A and OS structures from Pseudoalteromonas nigrifaciens Sq02-Rifr, which is a psychrotrophic Gram-negative bacterium isolated from the intestine of Seriola quinqueradiata. The immunomodulatory activity of both LPS and lipid A was also examined.

Several plant extracts are acquiring increasing value because of their antioxidant activity and hypolipidemic properties. Among them, great interest has been recently paid to a&ccedil, ai fruit as a functional food. The aim of this study was to test the ability of a&ccedil, ai extract in reducing oxidative stress and modulating lipid metabolism in vitro using different cell models and different types of stress. In fact, lipid peroxidation as evaluated in a HepG2 model was reduced five-fold when using 0.25 &micro, g/mL of extract, and it was further reduced (20-fold) with the concentration increase up to 2.5 &micro, g/mL. With the non alcoholic fatty liver disease (NAFLD)in vitro model, all concentrations tested showed at least a two-fold reduced fat deposit. In addition, primary adipocytes challenged with TNF-&alpha, under hypoxic conditions to mimic the persistent subcutaneous fat, treated with a&ccedil, ai extract showed an approximately 40% reduction of fat deposit. Overall, our results show that a&ccedil, ai is able to counteract oxidative states in all the cell models analysed and to prevent the accumulation of lipid droplets. No toxic effects and high stability overtime were highlighted at the concentrations tested. Therefore, a&ccedil, ai can be considered a suitable support in the prevention of different alterations of lipid and oxidative metabolism responsible for fat deposition and metabolic pathological conditions.

Diabetic foot ulcer (DFU) is a diabetes complication which greatly impacts the patient’s quality of life, often leading to amputation of the affected limb unless there is a timely and adequate management of the patient. DFUs have a high economic impact for the national health system. Data have indeed shown that DFUs are a major cause of hospitalization for patients with diabetes. Based on that, DFUs represent a very important challenge for the national health system. Especially in developed countries diabetic patients are increasing at a very high rate and as expected, also the incidence of DFUs is increasing due to longevity of diabetic patients in the western population. Herein, the surgical approach focused on the targeted use of the acellular dermal matrix has been integrated with biochemical and morphological/histological analyses to obtain evidence-based information on the mechanisms underlying tissue regeneration. In this research report, the clinical results indicated decreased postoperative wound infection levels and a short healing time, with a sound regeneration of tissues. Here we demonstrate that the key biomarkers of wound healing process are activated at gene expression level and also synthesis of collagen I, collagen III and elastin is prompted and modulated within the 28-day period of observation. These analyses were run on five patients treated with Integra® sheet and five treated with the injectable matrix Integra® Flowable, for cavitary lesions. In fact, clinical evaluation of improved healing was, for the first time, supported by biochemical and histological analyses. For these reasons, the present work opens a new scenario in DFUs treatment and follow-up, laying the foundation for a tailored protocol towards complete healing in severe pathological conditions.

16&alpha, Hydroxyprednisolone, an anti-inflammatory drug, could be potentially obtained from hydrocortisone bioconversion by combining a 1,2-dehydrogenation reaction performed by Arthrobacter simplexATCC31652 with a 16&alpha, hydroxylation reaction by Streptomyces roseochromogenes ATCC13400. In this study we tested, for the first time, potential approaches to couple the two reactions using similar pH and temperature conditions for hydrocortisone bioconversion by the two strains. The A. simplex capability to 1,2-dehydrogenate the 16&alpha, hydroxyhydrocortisone, the product of S. roseochromogenes transformation of hydrocortisone, and vice versa the capability of S. roseochromogenes to 16&alpha, hydroxylate the prednisolone were assessed. Bioconversions were studied in shake flasks and strain morphology changes were observed by SEM. Whole cell experiments were set up to perform the two reactions in a sequential mode in alternate order or contemporarily at diverse temperature conditions. A. simplex catalyzed either the dehydrogenation of hydrocortisone into prednisolone efficiently or of 16&alpha, hydroxyhydrocortisone into 16&alpha, hydroxyprednisolone in 24 h (up to 93.9%). Surprisingly S. roseochromogenes partially converted prednisolone back to hydrocortisone. A 68.8% maximum of 16&alpha, hydroxyprednisolone was obtained in 120-h bioconversion by coupling whole cells of the two strains at pH 6.0 and 26 &deg, C. High bioconversion of hydrocortisone into 16&alpha, hydroxyprednisolone was obtained for the first time by coupling A. simplex and S. roseochromogenes.

The direct impact of microgravity exposure on male germ cells, as well as on their malignant counterparts, has not been largely studied. In previous works, we reported our findings on a cell line derived from a human seminoma lesion (TCam-2 cell line) showing that acute exposure to simulated microgravity altered microtubule orientation, induced autophagy, and modified cell metabolism stimulating ROS production. Moreover, we demonstrated that the antioxidant administration prevented both TCam-2 microgravity-induced microtubule disorientation and autophagy induction. Herein, expanding previous investigations, we report that simulated microgravity exposure for 24 h induced the appearance, at an ultrastructural level, of cell-to-cell junctional contacts that were not detectable in cells grown at 1 g. In line with this result, pan-cadherin immunofluorescence analyzed by confocal microscopy, revealed the clustering of this marker at the plasma membrane level on microgravity exposed TCam-2 cells. The upregulation of cadherin was confirmed by Western blot analyses. Furthermore, we demonstrated that the microgravity-induced ROS increase was responsible for the distribution of cadherin nearby the plasma membrane, together with beta-catenin since the administration of antioxidants prevented this microgravity-dependent phenomenon. These results shed new light on the microgravity-induced modifications of the cell adhesive behavior and highlight the role of ROS as microgravity activated signal molecules.

Background: It has been shown that many plant- or microbial-derived oligos and polysaccharides may prompt tissue repair. Among the different extracts that have been studied, the aqueous one of Triticum vulgare (TVE) that was obtained from a whole germinated plant has been proven to have different biological properties that are useful in the process of wound healing. Nevertheless, with the long tradition of its use in pharmaceutical cream and ointments, especially in Italy, a new protocol was recently proposed (and patented) to improve the extraction process. Methods: In a simplified in vitro model, human keratinocyte monolayers were scratched and used to run time lapse experiments by using time lapse video microscopy (TLVM) to quantify reparation rate while considering a dose&ndash, response effect. Contemporarily, the molecular mechanisms that are involved in tissue repair were studied. In fact, key biomarkers that are involved in remodeling, such as MMP-2 and MMP-9, and in matrix structure assembly, such as collagen I, elastin, integrin &alpha, V and aquaporin 3, were evaluated with gene expression analyses (RT-PCR) and protein quantification in western blotting. Results: All TVE doses tested on the HaCat-supported cell proliferation. TVE also prompted cell migration in respect to the control, correctly modulating the timing of metalloproteases expression toward a consistent and well-assessed matrix remodeling. Furthermore, TVE treatments upregulated and positively modulated the expression of the analyzed biomarkers, thus resulting in a better remodeling of dermal tissue during healing. Conclusions: The in vitro results on the beneficial effects of TVE on tissue elasticity and regeneration may support a better understanding of the action mechanism of TVE as active principles in pharmaceutical preparation in wound treatment.

The complex and highly organized environment in which cells reside consists primarily of the extracellular matrix (ECM) that delivers biological signals and physical stimuli to resident cells. In the native myocardium, the ECM contributes to both heart compliance and cardiomyocyte maturation and function. Thus, myocardium regeneration cannot be accomplished if cardiac ECM is not restored. We hypothesize that decellularized human skin might make an easily accessible and viable alternate biological scaffold for cardiac tissue engineering (CTE). To test our hypothesis, we decellularized specimens of both human skin and human myocardium and analyzed and compared their composition by histological methods and quantitative assays. Decellularized dermal matrix was then cut into 600-μm-thick sections and either tested by uniaxial tensile stretching to characterize its mechanical behavior or used as three-dimensional scaffold to assess its capability to support regeneration by resident cardiac progenitor cells (hCPCs) in vitro. Histological and quantitative analyses of the dermal matrix provided evidence of both effective decellularization with preserved tissue architecture and retention of ECM proteins and growth factors typical of cardiac matrix. Further, the elastic modulus of the dermal matrix resulted comparable with that reported in literature for the human myocardium and, when tested in vitro, dermal matrix resulted a comfortable and protective substrate promoting and supporting hCPC engraftment, survival and cardiomyogenic potential. Our study provides compelling evidence that dermal matrix holds promise as a fully autologous and cost-effective biological scaffold for CTE.

Chondroitin sulfates (CS) are a class of sulfated glycosaminoglycans involved in many biological processes. Several studies reported their protective effect against neurodegenerative conditions like Alzheimer’s disease. CS are commonly derived from animal sources, but ethical concerns, the risk of contamination with animal proteins, and the difficulty in controlling the sulfation pattern have prompted research towards non-animal sources. Here we exploited two microbiological-chemical sourced CS (i.e., CS-A,C and CS-A,C,K,L) and Carbopol 974P NF/agarose semi-interpenetrating polymer networks (i.e., P.NaOH.0 and P.Ethanol.0) to set up a release system, and tested the neuroprotective role of released CS against H2O2-induced oxidative stress. After assessing that our CS (1–100 µM) require a 3 h pre-treatment for neuroprotection with SH-SY5Y cells, we evaluated whether the autoclave type (i.e., N- or B-type) affects hydrogel viscoelastic properties. We selected B-type autoclaves and repeated the study after loading CS (1 or 0.1 mg CS/0.5 mL gel). After loading 1 mg CS/0.5 mL gel, we evaluated CS release up to 7 days by 1,9-dimethylmethylene blue (DMMB) assay and verified the neuroprotective role of CS-A,C (1 µM) in the supernatants. We observed that CS-A,C exhibits a broader neuroprotective effect than CS-A,C,K,L. Moreover, sulfation pattern affects not only neuroprotection, but also drug release.

The effects of microgravity on functions of the human body are well described, including alterations in the male and female reproductive systems. In the present study, TCam-2 cells, which are considered a good model of mitotically active male germ cells, were used to investigate intracellular signalling and cell metabolism during exposure to simulated microgravity, a condition that affects cell shape and cytoskeletal architecture. After a 24 hour exposure to simulated microgravity, TCam-2 cells showed 1) a decreased proliferation rate and a delay in cell cycle progression, 2) increased anaerobic metabolism accompanied by increased levels of intracellular Ca2+, reactive oxygen species and superoxide anion and modifications in mitochondrial morphology. Interestingly, all these events were transient and were no longer evident after 48 hours of exposure. The presence of antioxidants prevented not only the effects described above but also the modifications in cytoskeletal architecture and the activation of the autophagy process induced by simulated microgravity. In conclusion, in the TCam-2 cell model, simulated microgravity activated the oxidative machinery, triggering transient macroscopic cell events, such as a reduction in the proliferation rate, changes in cytoskeleton-driven shape and autophagy activation.

The effectiveness of hyaluronic acid (HA), also called as hyaluronan, and its formulations on tissue regeneration and epidermal disease is well-documented. High-molecular-weight hyaluronan (HHA) is an efficient space filler that maintains hydration, serves as a substrate for proteoglycan assembly, and is involved in wound healing. Recently, an innovative hybrid cooperative complex (HCC) of high- and low-molecular-weight hyaluronan was developed that is effective in wound healing and bioremodeling. The HCC proposed here consisted of a new formulation and contained 1.6 &plusmn, 0.1 kDa HHA and 250 &plusmn, 7 kDa LHA (low molecular weight hyaluronic acid). We investigated the performance of this HCC in a novel in vitro HaCaT (immortalized human keratinocytes)/HDF (human dermal fibroblast) co-culture model to assess its ability to repair skin tissue lesions. Compared to linear HA samples, HCC reduced the biomarkers of inflammation (Transforming Growth Factor-&beta, (TGF-&beta, ), Tumor Necrosis Factor receptor-&alpha, (TNF-&alpha, ), interleukin-6 (IL-6), and interleukin-8 (IL-8)), and accelerated the healing process. These data were confirmed by the modulation of metalloproteases (MMPs) and elastin, and were compatible with a prospectively reduced risk of scar formation. We also examined the expression of defensin-2, an antimicrobial peptide, in the presence of hyaluronan, showing a higher expression in the HCC-treated samples and suggesting a potential increase in antibacterial and immunomodulatory functions. Based on these in vitro data, the presence of HCC in creams or dressings would be expected to enhance the resolution of inflammation and accelerate the skin wound healing process.

Biophysical and biochemical data on hyaluronan (HA)-based dermal fillers strongly support their optimal use and design to meet specific requisites. Here, four commercially available (in Europe) HA "volumetric" fillers, among the most used in the clinical practice, have been characterized in vitro. Analyses revealed the highest amounts of water-soluble HA reported so far and provided hydrodynamic data for these soluble polymeric fractions. Volumetric gels exhibit a wide range of rigidity with most of them showing G' values around 200-300Pa. They greatly differ in cohesivity. 1mL of gel hydrates up to 2.4-3.2mL. The products completely solubilize due to Bovine Testicular Hyaluronidase (BTH)'s action, thus predicting in vivo complete resorption. For the first time, filler degradation due to reactive oxygen species (ROS) was studied by rheological measurements and a rank in stability was established. Studies using Human Dermal Fibroblasts (HDF) indicated a positive biological response to the HA networks. Further, gel capacity to prompt collagen I, elastin and aquaporin3 synthesis was demonstrated, thus suggesting a positive effect on skin elasticity and hydration, besides the physical volumetric action. The findings are the first wide assessment of features for the volumetric class of HA-fillers and include first data on their resistance to degradation by ROS and biological effects on HDF. The study represents a valuable contribution to the understanding of HA-fillers, useful to optimize their use and manufacture.

High molecular weight hyaluronan (H-HA) has a pivotal role in the maintenance of normal functions of synovial fluid and structure of the articular joint, but it has been shown that its concentration is reduced in patients affected by degenerative cartilage diseases, such as osteoarthritis (OA). The aim of this study was to investigate the anti-inflammatory effects and properties of hybrid cooperative complexes based on high and low molecular weight hyaluronan (HCC) compared to H-HA on human primary cells derived by pathological joints. In addition, the rheological behavior of HCC was evaluated in order to define their potential as viscosupplement gel in degenerated joints. The experiments were performed using an in vitro model of OA based on human chondrocytes and synoviocytes isolated from degenerated joints of patients hospitalized for surgical replacement. In order to assess the anti-inflammatory effects of HCC, we evaluated NF-kB, COMP-2, IL-6, and IL-8 as specific markers at the transcriptional and/or protein level. Moreover, the proliferative properties of HCC were assessed using time lapse video microscopy. We showed that chondrocytes and synoviocytes clearly presented an altered cytokine profile compatible with a severe ongoing inflammation status. H-HA and, above all, HCC significantly reduced levels of the specific biomarkers evaluated and improved cartilage healing. The rheological profile indicated HCC suitability for intra-articular injection in joint diseases. HCC viscoelastic properties and the protective/anti-inflammatory effect on human chondrocytes and synoviocytes suggest the novel HCC-based gels as a valid support for OA management.

The biological activity of chondroitin sulfate (CS) and glucosamine (GlcN) food supplements (FS), sold in USA against osteoarthritis, might depend on the effective CS and GlcN contents and on the CS structural characteristics. In this paper three USA FS were compared to two pharmaceutical products (Ph). Analyses performed by HPAE-PAD, by HPCE and by SEC-TDA revealed that the CS and GlcN titers were up to −68.8% lower than the contents declared on the labels and that CS of mixed animal origin and variable molecular weights was present together with undesired keratan sulfate. Simulated gastric and intestinal digestions were performed in vitro to evaluate the real CS amount that may reach the gut as biopolymer. Chondrocytes and synoviocytes primary cells derived from human pathological joints were used to assess: cell viability, modulation of the NF-κB, quantification of cartilage oligomeric matrix protein (COMP-2), hyaluronate synthase enzyme (HAS-1), pentraxin (PTX-3) and the secreted IL-6 and IL-8 to assess inflammation. Of the three FS tested only one (US FS1) enhanced chondrocytes viability, while all of them supported synoviocytes growth. Although US FS1 proved to be less effective than Ph as it reduced NF-kB, it could not down-regulate COMP-2, HAS-1 was up-regulated but with a lower efficacy. Inflammatory cytokines were markedly reduced by Ph while a slight decrease was only found for US-FS1.

Commercial inexpensive preparations of poly-&gamma, glutamic acid were used to obtain films made with a polypeptide constituted by a single repeating unit. The homopolymer was characterized by 1H-NMR spectroscopy and thermogravimetry, as well as by zeta potential and Z-average measurements. Manipulatable materials were obtained by casting film-forming solutions prepared at pH values between 3.0 and 4.0 and containing extensively dialyzed samples of the commercial product. The analysis of the mechanical properties highlighted a marked extensibility and plasticity of the films obtained without plasticizer, even though the addition of low amounts of glycerol (1&ndash, 4%) was able to further increase these features. The characterization of poly-&gamma, glutamic acid molecular species, performed by membrane ultrafiltration and size-exclusion chromatography, coupled with triple-detection analysis of the obtained fractions, suggested that biopolymer chain length is responsible not only for its capacity to form film, but also for conferring to the films different features depending on the homopolymer molecular weight.

Olive oil boasts numerous health benefits due to the high content of the monounsaturated fatty acid (MUFA) and functional bioactives including tocopherols, carotenoids, phospholipids, and polyphenolics with multiple biological activities. Polyphenolic components present antioxidant properties by scavenging free radicals and eliminating metabolic byproducts of metabolism. The objective of this research project was to recover the biologically active components rich in polyphenols, which include treatment of olive oil mills wastewater, and, at the same time, to remove the pollutant waste component resulting from the olive oil manufacturing processes. With specific focus on using technologies based on the application of ultra and nanofiltration membranes, the polyphenols fraction was extracted after an initial flocculation step. The nano-filtration permeate showed a reduction of about 95% of the organic load. The polyphenols recovery after two filtration steps was about 65% w/v. The nanofiltration retentate, dried using the spray dryer technique, was tested for cell viability after oxidative stress induction on human keratinocytes model in vitro and an improved cell reparation in the presence of this polyphenolic compound was demonstrated in scratch assays assisted through time lapse video-microscopy. The polyphenols recovered from these treatments may be suitable ingredients in cosmeceuticals and possibly nutraceutical preparations or functional foods.