Search

The ANDRILL (Antarctic Drilling Project) McMurdo Ice Shelf (MIS) project drilled 1285 m of sediment in Hole AND-1B, representing the past 12 m.y. of glacial history. Downhole geophysical logs were acquired to a depth of 1018 mbsf (meters below seafloor), and are complementary to data acquired from the core. The natural gamma radiation (NGR) and magnetic susceptibility logs are particularly useful for understanding lithological and paleoenvironmental change at ANDRILL McMurdo Ice Shelf Hole AND-1B. NGR logs cover the entire interval from the seafloor to 1018 mbsf, and magnetic susceptibility and other logs covered the open hole intervals between 692 and 1018 and 237–342 mbsf. In the upper part of AND-1B, clear alternations between low and high NGR values distinguish between diatomite (lacking minerals containing naturally radioactive K, U, and Th) and diamictite (containing K-bearing clays, K-feldspar, mica, and heavy minerals). In the lower open hole logged section, NGR and magnetic susceptibility can also distinguish claystones (rich in K-bearing clay minerals, relatively low in magnetite) and diamictites (relatively high in magnetite). Sandstones can be distinguished by their high resistivity values in AND-1B. On the basis of these three downhole logs, diamictite, claystones, and sandstones can be predicted correctly for 74% of the 692–1018 mbsf interval. The logs were then used to predict facies for the 6% of this interval that was unrecovered by coring. Given the understanding of the physical property characteristics of different facies, it is also possible to identify subtle changes in lithology from the physical properties and help refine parts of the lithostratigraphy, for example, the varying terrigenous content of diatomites and the transitions from subice diamictite to open-water diatomite.

A hydrogeological study was conducted in Potsdam sandstones on the international border between Canada (Quebec) and the USA (New York). Two sandstone formations, arkose and conglomerate (base) and well-cemented quartz arenite (upper), underlie the study area and form the major regional aquifer unit. Glacial till, littoral sand and gravel, and marine silt and clay discontinuously overlie the aquifer. In both sandstone formations, sub-horizontal bedding planes are ubiquitous and display significant hydraulic conductivities that are orders of magnitude more permeable than the intact rock matrix. Aquifer tests demonstrate that the two formations have similar bulk hydrologic properties, with average hydraulic conductivities ranging from 2×10 −5 to 4×10 −5 m/s. However, due to their different lithologic and structural characteristics, these two sandstones impose rather different controls on groundwater flow patterns in the study area. Flow is sustained through two types of fracture networks: sub-horizontal, laterally extensive fractures in the basal sandstone, where hydraulic connec- tivity is very good horizontally but very poor vertically and each of the water-bearing bedding planes can be considered as a separate planar two-dimensional aquifer unit; and the more fractured and vertically jointed system found in the upper sandstone that promotes a more dispersed, three-dimensional movement of groundwater. Resume Une etude hydrogeologique a ete entreprise dans

Although it may be intuitive to think of the hydraulic conductivity K of unconsolidated, coarse-grained sediments as increasing monotonically with increasing porosity F, studies have documented a negative correlation between these two parameters under certain grain-size distributions and packing arrangements. This is confirmed at two sites on Cape Cod, Massachusetts, USA, where groundwater investigations were conducted in sand-and-gravel aquifers specifically to examine the interdependency of several aquifer properties using measurements from four geophysical well logs. Along with K and F, the electrical resistivity R0 and the natural gamma activity g of saturated deposits were determined as functions of depth. Qualitative examination of results from the first site implies a negative correlation between K and F that is substantiated by a rigorous multivariate analysis of log data collected from the second site. A principal components analysis describes an overdetermined system of inversion equations, with approximately 92% of the cumulative proportion of the total variance being accounted for by only three of the four eigenvectors. A subsequent R-mode factor analysis projects directional trends among the four variables (K, F, R0 and g), and a negative correlation between K and F emerges as the primary result. q 2005 Elsevier B.V. All rights reserved.

Hydraulic tests and geophysical logging performed in the Palisades sill and the underlying sedimentary rocks in the NE part of the Newark Rift Basin, New York, USA, confirm that the particular transmissive zones are localized within the dolerite-sedimentary rock contact zone and within a narrow interval below this contact zone that is characterized by the occurrence of small layers of chilled dolerite. Transmissivity values determined from fluid injection, aquifer testing, and flowmeter measurements generally fall in the range of 8.1E-08 to 9.95E-06 m2/s and correspond to various scales of investigation. The analysis of acoustic and optical BHTV images reveals two primary fracture sets within the dolerite and the sedimentary rocks—subhorizontal fractures, intersected by subvertical ones. Despite being highly fractured either with subhorizontal, subvertical or both fracture populations, the dolerite above and the sedimentary rocks below the contact zone and the zone with the layers of chilled dolerite are significantly less conductive. The distribution of the particular conductive intervals is not a function of the two dominant fracture populations or their density but rather of the intrusion path of the sill. The intrusion caused thermal fracturing and cracking of both formations, resulting in higher permeability along the contact zone.

As part of a multidisciplinary investigation designed to assess the implications of coal-bed methane development on water resources for the Powder River Basin of southeastern Montana, six wells were drilled through Paleocene-age coal beds along a 31km east–west transect within the Tongue River drainage basin. Analysis of geophysical logs obtained in these wells provides insight into the hydrostratigraphic characteristics of the coal and interbedded siliciclastic rocks and their possible interaction with the local stress field. Natural gamma and electrical resistivity logs were effective in distinguishing individual coal beds. Full-waveform sonic logs were used to determine elastic properties of the coal and an attendant estimate of aquifer storage is in reasonable agreement with that computed from a pumping test. Inspection of magnetically oriented images of the borehole walls generated from both acoustic and optical televiewers and comparison with coal cores infer a face cleat orientation of approximately N338E, in close agreement with regional lineament patterns and the northeast trend of the nearby Tongue River. The local tectonic stress field in this physiographic province as inferred from a nearby 1984 earthquake denotes an oblique strike-slip faulting regime with dominant east–west compression and north–south extension. These stress directions are coincident with those of the primary fracture sets identified from the televiewer logs and also with the principle axes of the drawdown ellipse produced from a complementary aquifer test, but oblique to apparent cleat orientation. Consequently, examination of these geophysical logs within the context of local hydrologic characteristics indicates that transverse transmissivity anisotropy in these coals is predominantly controlled by bedding configuration and perhaps a mechanical response to the contemporary stress field rather than solely by cleat structure. Published by Elsevier B.V.

The link between stress and hydrologic properties was examined at two sites that are distinguished by different rock types and different stress states. This investigation is based upon the analysis and interpretation of geophysical logs obtained in water wells at the two locations. At the northeast site (Newark Basin), the hydrologic characteristics of sedimentary rocks are dependent upon the relationship to the current regional stress field of two primary types of orthogonal features that serve as preferential pathways for fluid flow. Subhorizontal bedding-plane partings are highly transmissive near the surface and delineate transversely isotropic fluid flow at shallow depths. With increasing depth, the subhorizontal planes become less dominant and steeply dipping fractures become more influential hydrologically. These high-angle features define anisotropic flow pathways that are preferentially oriented along strike. At the southwest site (west Texas), extrusive rocks are subjected to topographically modified tectonic and gravitational stresses that vary spatially within a valley setting. The attendant changes in stress invariants cause fracture connectivity within the rock mass to systematically increase with depth along the valley flanks, but to remain relatively low in the central valley. The degree of fracture connectivity predicted within this valley configuration is consistent with variations in transmissivity determined at several well locations. In each of these cases, the idealized understanding of the hydrologic system is enhanced by considering the effects of regional and local stresses that act upon the fractured-rock aquifer.

Two extensive plumes (combined area .1000 km 2 ) have been delineated within the Ogallala aquifer in the Southern High Plains, TX, USA. Salinity varies within the plumes spatially and increases with depth; Cl ranges from 50 to .500 mg l 21 . Variable-density flow modeling using SUTRA has identified three broad regions of upward cross-formational flow from the underlying evaporite units. The upward discharge within the modeled plume area is in the range of 10 24 ‐10 25 m 3 day 21 , and the TDS concentrations are typically .3000 mg l 21 . Regions of increased salinity, identified within the Whitehorse Group (evaporite unit) underlying the Ogallala aquifer, are controlled by the structure and thickness variations relative to the recharge areas. Distinct flow paths, on the order of tens of km to .100 km in length, and varying flow velocities indicate that the salinization of the Ogallala aquifer has been a slow, ongoing process and may represent circulation of waters recharged during Pleistocene or earlier times. On-going pumping has had negligible impact on the salinity distribution in the Ogallala aquifer, although simulations indicate that the velocity distribution in the underlying units may have been affected to depths of 150 m after 30 years of pumping. Because the distribution of saline ground water in this region of the Ogallala aquifer is heterogeneous, careful areal and vertical characterization is warranted prior to any well-field development. q 2000 Elsevier Science B.V. All rights reserved.

The Brunswick Group and the underlying Lockatong Formation are composed of lithified Mesozoic sediments that constitute part of the Newark Basin in southeastern Pennsylvania. These fractured rocks form an important regional aquifer that consists of gradational sequences of shale, siltstone, and sandstone, with fluid transport occurring primarily in fractures. An extensive suite of geophysical logs was obtained in seven wells located at the borough of Lansdale, Pennsylvania, in order to better characterize the areal hydrogeologic system and provide guidelines for the refinement of numerical ground water models. Six of the seven wells are approximately 120 m deep and the seventh extends to a depth of 335 m. Temperature, fluid conductivity, and flowmeter logs are used to locate zones of fluid exchange and to quantify transmissivities. Electrical resistivity and natural gamma logs together yield detailed stratigraphic information, and digital acoustic televiewer data provide magnetically oriented images of the borehole wall from which almost 900 fractures are identified. Analyses of the geophysical data indicate that the aquifer penetrated by the deep well can be separated into two distinct structural domains, which may, in turn, reflect different mechanical responses to basin extension by different sedimentary units: 1. In the shallow zone (above 125 m), the dominant fracture population consists of gently dipping bedding plane partings that strike N46°E and dip to the northwest at about 11 degrees. Fluid flow is concentrated in the upper 80 m along these subhorizontal fractures, with transmissivities rapidly diminishing in magnitude with depth. 2. The zone below 125 m marks the appearance of numerous high-angle fractures that are orthogonal to the bedding planes, striking parallel but dipping steeply southeast at 77 degrees. This secondary set of fractures is associated with a fairly thick (approximately 60 m) high-resistivity, low-transmissivity sandstone unit that is abruptly terminated by a thin shale bed at a depth of 190 m. This lower contact effectively delineates the aquifer's vertical extent at this location because no detectable evidence of ground water movement is found below it. Thus, fluid flow is controlled by fractures, but fracture type and orientation are related to lithology. Finally, a transient thermal-conduction model is successfully applied to simulate observed temperature logs, thereby confirming the effects of ground-surface warming that occurred in the area as a result of urbanization at the turn of the century. The systematic warming of the upper 120 m has increased the transmissivity of this aquifer by almost 10%, simply due to changes in fluid viscosity and density.

The acoustic televiewer is a geophysical logging instrument that is deployed in a water-filled borehole and operated while trolling. It generates a digital, magnetically oriented image of the borehole wall that is developed from the amplitudes and transit times of acoustic waves emitted from the tool and reflected at the water–wall interface. The transit-time data are also converted to radial distances, from which cross-sectional views of the borehole shape can be constructed. Because the televiewer is equipped with both a three-component magnetometer and a two-component inclinometer, the borehole’s trajectory in space is continuously recorded as well. This instrument is routinely used in mining and hydrogeologic applications, but in this investigation it was deployed in two boreholes drilled into Upper Fremont Glacier, Wyoming, U.S.A. The acoustic images recorded in this glacial setting are not as clear as those typically obtained in rocks, due to a lower reflection coefficient for water and ice than for water and rock. Results indicate that the depth and orientation of features intersecting the boreholes can be determined, but that interpreting their physical nature is problematic and requires corroborating information from inspection of cores. Nevertheless, these data can provide some insight into englacial structural characteristics. Additional information derived from the cross-sectional geometry of the borehole, as well as from its trajectory, may also be useful in studies concerned with stress patterns and deformation processes.

The Passaic Formation consists of gradational sequences of mudstone, siltstone, and sandstone, and is a principal aquifer in central New Jersey. Ground-water flow is primarily controlled by fractures interspersed throughout these sedimentary rocks and characterizing these fractures in terms of type, orientation, spatial distribution, frequency, and transmissivity is fundamental towards understanding local fluid-transport processes. To obtain this information, a comprehensive suite of geophysical logs was collected in 10 wells roughly 46 m in depth and located within a .05 km2 area in Hopewell Township, New Jersey. A seemingly complex, heterogeneous network of fractures identified with an acoustic televiewer was statistically reduced to two principal subsets corresponding to two distinct fracture types: (1) bedding-plane partings and (2) high-angle fractures. Bedding-plane partings are the most numerous and have an average strike of N84°W and dip of 20° N. The high-angle fractures are oriented subparallel to these features, with an average strike of N79° E and dip of 71° S, making the two fracture types roughly orthogonal. Their intersections form linear features that also retain this approximately east-west strike. Inspection of fluid temperature and conductance logs in conjunction with flow meter measurements obtained during pumping allows the transmissive fractures to be distinguished from the general fracture population. These results show that, within the resolution capabilities of the logging tools, approximately 51 (or 18 percent) of the 280 total fractures are water producing. The bedding-plane partings exhibit transmissivities that average roughly 5 m2/day and that generally diminish in magnitude and frequency with depth. The high-angle fractures have average transmissivities that are about half those of the bedding-plane partings and show no apparent dependence upon depth. The geophysical logging results allow us to infer a distinct hydrogeologic structure within this aquifer that is defined by fracture type and orientation. Fluid flow near the surface is controlled primarily by the highly transmissive, subhorizontal bedding-plane partings. As depth increases, the high-angle fractures apparently become more dominant hydrologically.

The Antarctic Drilling Program (ANDRILL) successfully drilled and cored a borehole, AND-1B, beneath the McMurdo Ice Shelf and into a fl exural moat basin that surrounds Ross Island. Total drilling depth reached 1285 m below seafl oor (mbsf) with 98 percent core recovery for the detailed study of glacier dynamics. With the goal of obtaining complementary information regarding heat fl ow and permeability, which is vital to understanding the nature of marine hydrogeologic systems, a succession of three temperature logs was recorded over a fi veday span to monitor the gradual thermal recovery toward equilibrium conditions. These data were extrapolated to true, undisturbed temperatures, and they defi ne a linear geothermal gradient of 76.7 K/km from the seafl oor to 647 mbsf. Bulk thermal conductivities of the sedimentary rocks were derived from empirical mixing models and density measurements performed on core, and an average value of 1.5 W/mK ± 10 percent was determined. The corresponding estimate of heat fl ow at this site is 115 mW/m 2 . This value is relatively high but is consistent with other elevated heat-fl ow data associated with the Erebus Volcanic Province. Information regarding the origin and frequency of pathways for subsurface fl uid fl ow is gleaned from drillers’ records, complementary geophysical logs, and core descriptions. Only two prominent permeable zones are identifi ed and these correspond to two markedly different features within the rift basin; one is a distinct lithostratigraphic subunit consisting of a thin lava fl ow and the other is a heavily fractured interval within a single thick subunit.

The DIANAUT program provided the first opportunity to directly measure vertical fluid flow in ocean boreholes by means of a high resolution thermal flowmeter. Measurements of volumetric flow rate were obtained in DSDP (Deep Sea Drilling Project) Holes 395A and 534A. These results identified a total flow of 2300 L/hr of seawater entering Hole 395A from the seafloor that diminished to about 550 L/hr at a depth of 251 meters below seafloor (mbsf), indicating that approximately 3/4 of the original downward flow had exited the borehole and entered the open formation across the upper 140 m of basement. This information allows the upper oceanic crust at this site to be delimitated into three hydrologic units, with basalt permeabilities of 3.0 × 10−14 m2 near the sediment/basement interface decreasing sharply as a function of depth to values much less than 10−16 m2 below 440 mbsf. It is estimated that approximately 108 L of seawater have entered this well since it was drilled in 1975. Quantitative flow measurements in Hole 534A were inconclusive because of technical problems with the flowmeter packer. Nevertheless, results showed that borehole fluid was moving upward and out into the open ocean at a rate on the order of a few hundred liters per hour, roughly one order of magnitude less than that determined for Hole 395A and moving in the opposite direction. There is good correlation between these field measurements and the attendant temperature logs from each well, and the results provide strong evidence of important mass-transport processes associated with the diverse submarine hydrologic systems in the upper oceanic crust.

Heat-flow values determined from the DIANAUT program provide insight into the geothermal state of three DSDP holes situated on the western flank of the Mid-Atlantic Ridge. Very low values (20 mW/m2 max.) observed in 3.5-m.y.-old crust at Hole 333A decrease with depth and indicate persistent basement cooling due to cold water circulation in the porous level of the upper oceanic crust. Cold ocean bottomwater continues to invade the upper level of fractured 7.3-m.y.-old basement at Hole 395A, but temperature v. time records show large-scale temperature fluctuations, probably associated with borehole convection, at 500 mbsf and stable temperatures, probably indicating a slow return to thermal equilibrium, at 600 mbsf. The 154-m.y.-old crust at Hole 534A exhibits a relatively steady thermal state with a heat flow close to theoretical values for a conductively cooling plate; small variations in the thermal gradient recorded in this well probably represent very slow and subtle movement of borehole fluids. The close comparison of these latest results with those obtained several years previously, demonstrates the presence of relatively stable thermal regimes.

The French wireline re-entry expedition known as DIANAUT culminated in the successful completion of a series of downhole measurements in three Deep Sea Drilling Project (DSDP) holes in the north-central Atlantic Ocean. Among these measurements was a borehole televiewer (BHTV) log obtained in Hole 395A from bottom of casing at 112 meters below seafloor (mbsf) to a depth of 605 mbsf. In contrast with a BHTV survey previously conducted in this well during DSDP Leg 78B in 1981, televiewer data were not degraded by random cable oscillations due to ship heave and the quality of this log is excellent. These latest data were digitized and processed in terms of acoustic travel time and amplitude to compute hole size and shape, evaluate the structural integrity of the surrounding rock, and characterize intersecting fractures. The acoustic caliper and reflectivity logs correlate well with the lithologic column, particularly at the boundaries between major units which often are marked by breccias. Fractures in the lower part of the hole appear to be effectively sealed, in contrast with the open fractures identified in the upper sections. This supports a systematic pattern derived from complementary geophysical logs of increasing density, electrical resistivity, and elastic-wave velocity, and decreasing in situ permeability as a function of depth. Fractures intersecting the well exhibit a wide range of orientations marked by some clustering of dip azimuths approximately east-west. The presence of moderately dipping fractures striking subparallel to the ridge axis is consistent with both ridge-parallel topographic elongations observed in this area and with azimuthal seismic anisotropy reported elsewhere, suggesting that fractures such as those identified from the BHTV record contribute to these effects.

A field experiment consisting of geophysical logging and tracer testing was conducted in a single well that penetrated a sand-and-gravel aquifer at the U.S. Geological Survey Toxic Substances Hydrology research site on Cape Cod, Massachusetts. Geophysical logs and flowmeter/pumping measurements were obtained to estimate vertical profiles of porosity phi, hydraulic conductivity K, temperature, and bulk electrical conductivity under background, freshwater conditions. Saline-tracer fluid was then injected into the well for 2 h and its radial migration into the surrounding deposits was monitored by recording an electromagnetic-induction log every 10 min. The field data are analyzed and interpreted primarily through the use of Archie's (1942) law to investigate the role of topological factors such as pore geometry and connectivity, and grain size and packing configuration in regulating fluid flow through these coarse-grained materials. The logs reveal no significant correlation between K and phi, and imply that groundwater models that link these two properties may not be useful at this site. Rather, it is the distribution and connectivity of the fluid phase as defined by formation factor F, cementation index m, and tortuosity alpha that primarily control the hydraulic conductivity. Results show that F correlates well with K, thereby indicating that induction logs provide qualitative information on the distribution of hydraulic conductivity. A comparison of alpha, which incorporates porosity data, with K produces only a slightly better correlation and further emphasizes the weak influence of the bulk value of varphi on K.

Thirty years after oxygen isotope records from microfossils deposited in ocean sediments confirmed the hypothesis that variations in the Earth's orbital geometry control the ice ages, fundamental questions remain over the response of the Antarctic ice sheets to orbital cycles. Furthermore, an understanding of the behaviour of the marine-based West Antarctic ice sheet (WAIS) during the 'warmer-than-present' early-Pliocene epoch ( approximately 5-3 Myr ago) is needed to better constrain the possible range of ice-sheet behaviour in the context of future global warming. Here we present a marine glacial record from the upper 600 m of the AND-1B sediment core recovered from beneath the northwest part of the Ross ice shelf by the ANDRILL programme and demonstrate well-dated, approximately 40-kyr cyclic variations in ice-sheet extent linked to cycles in insolation influenced by changes in the Earth's axial tilt (obliquity) during the Pliocene. Our data provide direct evidence for orbitally induced oscillations in the WAIS, which periodically collapsed, resulting in a switch from grounded ice, or ice shelves, to open waters in the Ross embayment when planetary temperatures were up to approximately 3 degrees C warmer than today and atmospheric CO(2) concentration was as high as approximately 400 p.p.m.v. (refs 5, 6). The evidence is consistent with a new ice-sheet/ice-shelf model that simulates fluctuations in Antarctic ice volume of up to +7 m in equivalent sea level associated with the loss of the WAIS and up to +3 m in equivalent sea level from the East Antarctic ice sheet, in response to ocean-induced melting paced by obliquity. During interglacial times, diatomaceous sediments indicate high surface-water productivity, minimal summer sea ice and air temperatures above freezing, suggesting an additional influence of surface melt under conditions of elevated CO(2).

Borehole televiewer (BHTV) and 4-arm caliper (dipmeter) logs were obtained in the Toa Baja well (drilled to a depth of 2704 m into sediments of the North Coast Tertiary Basin, Puerto Rico) from 704 to 2676 m depth. The only observations suggesting that stress-induced wellbore failure (breakouts) had occurred were small intermittent features at a depth of approximately 2600 m with azimuths of 70° and 250° and the fact that, during drilling, wellbore stability became a problem near total depth. An increase in mud weight to 10 Lb/gal required to stabilize the deteriorating wellbore was accompanied by loss of drilling fluid into the formation, suggesting that hydraulic fracturing or the reopening of pre-existing near vertical fractures had occurred. A series of vertical fractures at a variety of azimuths (averaging N3l°W) was detected by the BHTV. The loss of circulation due to an increase in mud weight, combined with the absence of well-developed breakouts, enables us to estimate stress magnitudes near the well for reasonable values of rock strength: S1=Sv; S3=Shmin ≈ 0.5v; SHmax ≈ (0.55–0.63)Sv, and an associated incipient normal faulting stress regime. This stress regime is consistent with focal mechanisms determined for earthquakes with epicenters near the drillsite.

Oval images etched into the wall of a deep borehole were detected in DSDP (Deep Sea Drilling Project) Hole 504B, eastern equatorial Pacific Ocean, from analysis of an acoustic televiewer log. Initial speculation as to the origin of these remarkable features considered the intersection of pillow basalts with the wellbore. However, a systematic inspection of these ovals has identified intriguing consistencies in appearance that cannot be explained satisfactorily by a random, coincidental distribution of pillow lavas. As an alternative hypothesis, Mohr-Coulomb failure criterion is used to account for the generation and orientation of similarly curved, stress-induced fractures. Consequently, these oval features can be interpreted as fractures and related directly to stress conditions in the oceanic crust at this site. The azimuth of the oval center corresponds to the orientation of maximum horizontal principal stress (S{sub H}), and the oval width, which spans approximately 180{degree} of the borehole, is aligned with the azimuth of minimum horizontal principal stress (S{sub h}). The oval height is controlled by the fracture angle and thus is a function of the coefficient of internal friction of the rock.

[1] The Châteauguay River Basin delineates a transborder watershed with roughly half of its surface area located in northern New York State and half in southern Quebec Province, Canada. As part of a multidisciplinary study designed to characterize the hydrogeologic properties of this basin, geophysical logs were obtained in 12 wells strategically located to penetrate the four major sedimentary rock formations that constitute the regional aquifers. The layered rocks were classified according to their elastic properties into three primary units: soft sandstone, hard sandstone, and dolostone. Downhole measurements were analyzed to identify fracture patterns associated with each unit and to evaluate their role in controlling groundwater flow. Fracture networks are composed of orthogonal sets of laterally extensive, subhorizontal bedding plane partings and bed-delimited, subvertical joints with spacings that are consistent with rock mechanics principles and stress models. The vertical distribution of transmissive zones is confined to a few select bedding plane fractures, with soft sandstone having the fewest (one per 70-m depth) and hard sandstone the most (five per 70-m depth). Bed-normal permeability is examined using a probabilistic model that considers the lengths of flow paths winding along joints and bedding plane fractures. Soft sandstone has the smallest bed-normal permeability primarily because of its wide, geomechanically undersaturated joint spacing. Results indicate that the three formations have similar values of bulk transmissivity, within roughly an order of magnitude, but that each rock unit has its own unique system of groundwater flow paths that constitute that transmissivity.

[1] As part of the Hawaii Scientific Drilling Project (HSDP), an exploratory hole was drilled in 1993 to a depth of 1056 meters below sea level (mbsl) and a deeper hole was drilled to 3098 mbsl in 1999. A set of geophysical well logs was obtained in the deeper hole that provides fundamental information regarding the structure and the state of stress that exist within a volcanic shield. The acoustic televiewer generates digital, magnetically oriented images of the borehole wall, and inspection of this log yields a continuous record of fracture orientation with depth and also with age to 540 ka. The data depict a clockwise rotation in fracture strike through the surficial Mauna Loa basalts that settles to a constant heading in the underlying Mauna Kea rocks. This behavior reflects the depositional slope directions of lavas and the locations of volcanic sources relative to the drill site. The deviation log delineates the trajectory of the well bore in three-dimensional space. This path closely follows changes in fracture orientation with depth as the drill bit is generally prodded perpendicular to fracture strike during the drilling process. Stress-induced breakouts observed in the televiewer log identify the orientations of the maximum and minimum horizontal principal stresses to be north-south and east-west, respectively. This stress state is attributed to the combination of a sharp break in onshore-offshore slope that reduces stress east-west and the emergence of Kilauea that increases stress north-south. Breakouts are extensive and appear over approximately 30% of the open hole.

Abstract Borehole televiewer, temperature, and flowmeter data recorded in six wells penetrating a geothermal reservoir associated with the Stillwater fault zone in Dixie Valley, Nevada, were used to investigate the relationship between reservoir permeability and the contemporary in situ stress field. Data from wells drilled into productive and nonproductive segments of the Stillwater fault zone indicate that permeability in all wells is dominated by a relatively small number of fractures striking parallel to the local trend of the fault. However, Coulomb failure analysis using our fracture orientations in conjunction with stress orientations and magnitudes determined by Ref. 1 suggests that fault zone permeability is high only when individual fractures as well as the overall Stillwater fault zone are optimally oriented and critically stressed for frictional failure. Fracture geometry may also play a significant role in determining reservoir productivity. The well-developed populations of low-angle fractures present in wells drilled into the producing segment of the fault are not present within the relatively impermeable segment of the Stillwater fault zone. P. 315

The late Eocene Chesapeake Bay impact structure is a well-preserved example of one of Earth's largest impact craters, and its continental-shelf setting and relatively shallow burial make it an excellent target for study. Since the discovery of the structure over a decade ago [Edwards et al., 2004; Poag et al., 2004], test drilling by U.S. federal and state agencies has been limited to the structure's annular trough (Figure 1). In May 2004, the U.S. Geological Survey (USGS) drilled the first scientific test hole into the central crater of the Chesapeake Bay impact structure in Cape Charies,Virginia (Figure 1). This partially cored test hole, the deepest to date, penetrated postimpact sediments and impact breccias to a total depth of 823 m.

[1] As part of a regional groundwater investigation, geophysical logs were obtained in two municipal water wells located near the west Texas city of Alpine. These boreholes are 252 and 285 m deep and penetrate extrusive rocks of Tertiary age. The deeper well was drilled in the central valley and the other along the northern flank of an east-west trending valley-ridge setting. Analysis and interpretation of the logs reveal that the two wells are subjected to significantly different stress environments because of topographic effects and exhibit significantly different hydrogeologic properties. Water production is associated with two specific types of features common to both wells: (1) the upper and lower contacts of a dense trachyte unit located in the shallow part of the wells and (2) deeper zones of highly fractured rocks within the interior of a basalt formation. The transmissivity of the trachyte boundaries is twice as large in the central valley well as it is in the ridge flank well, whereas the transmissivity of the deeper basalts is an order of magnitude greater in the flank well than it is in the central well. This discrepancy is examined from the perspective of rock failure, fracture opening, and flow enhancement by computing values for a Drucker-Prager stability factor that is based on the magnitudes of the normal and deviatoric stress invariants as a function of depth. Thus the field measurements and subsequent stress analysis offer evidence of a coupled tectonic-hydrologic interaction at this site.

Returns from drilling in unconsolidated cobble and sand aquifers commonly do not identify lithologic changes that may be meaningful for hydrogeologic investigations. Vertical resolution of saturated, Quaternary, coarse braided-stream deposits is significantly improved by interpreting natural gamma (G), epithermal neutron (N), and electromagnetically induced resistivity (IR) logs obtained from wells at the Capital Station site in Boise, Idaho. Interpretation of these geophysical logs is simplified because these sediments are derived largely from high-gamma–producing source rocks (granitics of the Boise River drainage), contain few clays, and have undergone little diagenesis. Analysis of G, N, and IR data from these deposits with principal components analysis provides an objective means to determine if units can be recognized within the braided-stream deposits. In particular, performing principal components analysis on G, N, and IR data from eight wells at Capital Station (1) allows the variable system dimensionality to be reduced from three to two by selecting the two eigenvectors with the greatest variance as axes for principal component scatterplots, (2) generates principal components with interpretable physical meanings, (3) distinguishes sand from cobble-dominated units, and (4) provides a means to distinguish between cobble-dominated units.

Late Eocene-early Oligocene (42–35 Myr) sediments cored at two DSDP sites in the south-west Pacific contain evidence of a pronounced increase in local volcanic activity, particularly in close association with the Eocene–Oligocene boundary. This pulse of volcanism is coeval with that in New Zealand and resulted from the development of an Indo- Australian / Pacific Plate boundary through the region during the late Eocene. The late Eocene / earliest Oligocene was marked by widespread volcanism and tectonism throughout the Pacific and elsewhere, and by one of the most important episodes of Cenozoic climatic cooling.

Hole 504B in the eastern equatorial Pacific has been the focus of five scientific drilling expeditions since it was first drilled in 1979. During these five legs, a series of temperature logs has been obtained over a time span of almost 8 yr, documenting the geothermal and hydrologic state of the oceanic crust in this region. Immediately following reentry at the onset of ODP Leg 111 operations, a high-resolution temperature probe was lowered into the borehole and a precise record of temperature vs. depth in Hole 504B was recorded down to 1300 mbsf. As was observed during previous legs, the temperature gradient in the upper 400 m was reduced, indicating that downhole flow of cool ocean waters through the casing continued, though at a diminished rate. As subhydrostatic pres­ sures in the upper basement have gradually diminished, the volume of flow has decayed from an estimated 6000-7000 L/hr in late 1979 to about 80 L/hr during Leg 111. At depths below 480 mbsf, a predominantly conductive heat transfer environment enabled the temperature gradient log to be analyzed with respect to lithology on both fine and broad scales. Anomalies in the gradient log in the cased section through the sedimentary column were found to correspond to biostratigrap hic age markers and/or sharp changes in sediment composition and texture. Broad variations in temperature gradient within the basement correlated with large-scale porosity trends. Conductive heatflow estimates depict a systematic reduction with depth, ranging from approximately 196 mW/m2 in the sediments to 120 ± 17 mW/m2 at 1300 mbsf. Possible causes for this observation were examined from several perspectives, but none was suitably convincing. A fluid instability analysis indicated the likely existence of convection cells within the borehole and substantiated the hypothesis of mixing within the borehole postulated from isotopic and chemical studies of borehole waters. However, such mixing of borehole fluids does not provide an adequate explanation for the heatflow variations, and the disparity between surficial and deep values of heat flow remains unresolved.

Thermal gradient measurements, consolidation tests, and pore water compositions from the Mariana Trough imply that water is moving through the sediments in areas with less than about 100 m of sediment cover. The maximum advection rates implied by the thermal measurements and consolidation tests may be as high as 10−5 cm s−1 but are most commonly in the range of 1 to 5×10−6 cm s−1. Theoretical calculations of the effect of the highest advection rates upon carbonate dissolution indicate that dissolution may be impeded or enhanced (depending upon the direction of flow) by a factor of 2 to 5 times the rate for diffusion alone. The average percentage of carbonate is consistently higher in two cores from the area with no advection or upward advection than the average percentage of carbonate in three cores from the area with downward advection. This increase in average amount of carbonate in cores with upward moving water or no movement cannot be attributed solely to differences in water depth or in amount of terrigenous dilution. If the sediment column acts as a passive boundary layer, then the water velocities necessary to affect chemical gradients of silica are in the range 10−9 to 10−10 cm s−l. However, if dissolution of silica occurs within the sediment column, then the advection velocities needed to affect chemical gradients are at least 3×10−8 cm s−l and may be as high as 3×10−6 cm s−l. This order of magnitude increase in advection velocities when chemical reactions occur within the sediments is probably applicable to other cations in addition to silica. If so, then the advection velocities needed to affect heat flow ( >10−8 cm s−1) and pore water chemical gradients are much nearer in magnitude than previously assumed.

A series of laboratory experiments was conducted with four ocean sediments, two biogenic oozes and two clays. Permeability and thermal conductivity were directly measured as a function of porosity, and the testing program was designed to identify any dependence of these physical properties upon hydrostatic pressure and temperature. The results show no discernible effects of pressure, within the range of 2–60 MPa, upon the permeability of any of the samples. Temperature effects, from 22° to 220°C, upon this property are accounted for by applying a viscosity correction to the permeating seawater. Previous investigations have suggested the existence of a pressure-induced and/or a temperature-induced breakdown of the absorbed water which surrounds clay particles, thereby promoting an increase in sediment permeability. Our experimental findings cannot confirm this phenomenon and fail to provide a satisfactory solution to the conflicting data which now exist between the pore water velocities inferred from nonlinear thermal profiles of ocean sediments and those fluid velocities derived from Darcy's law and laboratory permeability data. The effects of sizeable variations in pressure and temperature upon sediment thermal conductivity are found to reflect closely the behavior of the conductivity of the liquid phase alone under these same changes in environmental conditions. This is not surprising due to the relatively narrow range of high porosities encountered in this study. Empirical equations are developed which allow sediment thermal conductivity to be calculated as a function of temperature and void ratio. A hydrostatic pressure correction term is also presented.