Search

Robotic solutions for quick disaster response are essential to ensure minimal loss of life, especially when the search area is too dangerous or too vast for human rescuers. We model this problem as an asynchronous multi-agent active-search task where each robot aims to efficiently seek objects of interest (OOIs) in an unknown environment. This formulation addresses the requirement that search missions should focus on quick recovery of OOIs rather than full coverage of the search region. Previous approaches fail to accurately model sensing uncertainty, account for occlusions due to foliage or terrain, or consider the requirement for heterogeneous search teams and robustness to hardware and communication failures. We present the Generalized Uncertainty-aware Thompson Sampling (GUTS) algorithm, which addresses these issues and is suitable for deployment on heterogeneous multi-robot systems for active search in large unstructured environments. We show through simulation experiments that GUTS consistently outperforms existing methods such as parallelized Thompson Sampling and exhaustive search, recovering all OOIs in 80% of all runs. In contrast, existing approaches recover all OOIs in less than 40% of all runs. We conduct field tests using our multi-robot system in an unstructured environment with a search area of approximately 75,000 sq. m. Our system demonstrates robustness to various failure modes, achieving full recovery of OOIs (where feasible) in every field run, and significantly outperforming our baseline., Comment: 7 pages, 5 figures, 1 table, for associated video see: https://youtu.be/K0jkzdQ_j2E , published in International Conference on Robotics and Automation (ICRA) 2023. Outstanding Deployed Systems Paper Winner

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics.

The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%.

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances., Comment: 20 pages, 13 figures

Multi-agent active search requires autonomous agents to choose sensing actions that efficiently locate targets. In a realistic setting, agents also must consider the costs that their decisions incur. Previously proposed active search algorithms simplify the problem by ignoring uncertainty in the agent's environment, using myopic decision making, and/or overlooking costs. In this paper, we introduce an online active search algorithm to detect targets in an unknown environment by making adaptive cost-aware decisions regarding the agent's actions. Our algorithm combines principles from Thompson Sampling (for search space exploration and decentralized multi-agent decision making), Monte Carlo Tree Search (for long horizon planning) and pareto-optimal confidence bounds (for multi-objective optimization in an unknown environment) to propose an online lookahead planner that removes all the simplifications. We analyze the algorithm's performance in simulation to show its efficacy in cost aware active search.

Active search, in applications like environment monitoring or disaster response missions, involves autonomous agents detecting targets in a search space using decision making algorithms that adapt to the history of their observations. Active search algorithms must contend with two types of uncertainty: detection uncertainty and location uncertainty. The more common approach in robotics is to focus on location uncertainty and remove detection uncertainty by thresholding the detection probability to zero or one. In contrast, it is common in the sparse signal processing literature to assume the target location is accurate and instead focus on the uncertainty of its detection. In this work, we first propose an inference method to jointly handle both target detection and location uncertainty. We then build a decision making algorithm on this inference method that uses Thompson sampling to enable decentralized multi-agent active search. We perform simulation experiments to show that our algorithms outperform competing baselines that only account for either target detection or location uncertainty. We finally demonstrate the real world transferability of our algorithms using a realistic simulation environment we created on the Unreal Engine 4 platform with an AirSim plugin., Comment: Accepted to ICRA 2023

The active search for objects of interest in an unknown environment has many robotics applications including search and rescue, detecting gas leaks or locating animal poachers. Existing algorithms often prioritize the location accuracy of objects of interest while other practical issues such as the reliability of object detection as a function of distance and lines of sight remain largely ignored. Additionally, in many active search scenarios, communication infrastructure may be unreliable or unestablished, making centralized control of multiple agents impractical. We present an algorithm called Noise-Aware Thompson Sampling (NATS) that addresses these issues for multiple ground-based robots performing active search considering two sources of sensory information from monocular optical imagery and depth maps. By utilizing Thompson Sampling, NATS allows for decentralized coordination among multiple agents. NATS also considers object detection uncertainty from depth as well as environmental occlusions and operates while remaining agnostic of the number of objects of interest. Using simulation results, we show that NATS significantly outperforms existing methods such as information-greedy policies or exhaustive search. We demonstrate the real-world viability of NATS using a pseudo-realistic environment created in the Unreal Engine 4 game development platform with the AirSim plugin., Comment: To appear at the 2021 IEEE International Conference on Robotics and Automation (ICRA), extended version

Practical systems often suffer from hardware impairments that already appear during signal generation. Despite the limiting effect of such input-noise impairments on signal processing systems, they are routinely ignored in the literature. In this paper, we propose an algorithm for data detection and signal estimation, referred to as Approximate Message Passing with Input noise (AMPI), which takes into account input-noise impairments. To demonstrate the efficacy of AMPI, we investigate two applications: Data detection in large multiple-input multiple output (MIMO) wireless systems and sparse signal recovery in compressive sensing. For both applications, we provide precise conditions in the large-system limit for which AMPI achieves optimal performance. We furthermore use simulations to demonstrate that AMPI achieves near-optimal performance at low complexity in realistic, finite-dimensional systems.

Active search refers to the problem of efficiently locating targets in an unknown environment by actively making data-collection decisions, and has many applications including detecting gas leaks, radiation sources or human survivors of disasters using aerial and/or ground robots (agents). Existing active search methods are in general only amenable to a single agent, or if they extend to multi agent they require a central control system to coordinate the actions of all agents. However, such control systems are often impractical in robotics applications. In this paper, we propose two distinct active search algorithms called SPATS (Sparse Parallel Asynchronous Thompson Sampling) and LATSI (LAplace Thompson Sampling with Information gain) that allow for multiple agents to independently make data-collection decisions without a central coordinator. Throughout we consider that targets are sparsely located around the environment in keeping with compressive sensing assumptions and its applicability in real world scenarios. Additionally, while most common search algorithms assume that agents can sense the entire environment (e.g. compressive sensing) or sense point-wise (e.g. Bayesian Optimization) at all times, we make a realistic assumption that each agent can only sense a contiguous region of space at a time. We provide simulation results as well as theoretical analysis to demonstrate the efficacy of our proposed algorithms., Comment: Preprint under review

We propose sparsity-adaptive beamspace channel estimation algorithms that improve accuracy for 1-bit data converters in all-digital millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) basestations. Our algorithms include a tuning stage based on Stein's unbiased risk estimate (SURE) that automatically selects optimal denoising parameters depending on the instantaneous channel conditions. Simulation results with line-of-sight (LoS) and non-LoS mmWave massive MIMO channel models show that our algorithms improve channel estimation accuracy with 1-bit measurements in a computationally-efficient manner., Comment: Presented at IEEE SPAWC 2020

Deep neural networks achieve state-of-the-art performance for a range of classification and inference tasks. However, the use of stochastic gradient descent combined with the nonconvexity of the underlying optimization problems renders parameter learning susceptible to initialization. To address this issue, a variety of methods that rely on random parameter initialization or knowledge distillation have been proposed in the past. In this paper, we propose FuseInit, a novel method to initialize shallower networks by fusing neighboring layers of deeper networks that are trained with random initialization. We develop theoretical results and efficient algorithms for mean-square error (MSE)-optimal fusion of neighboring dense-dense, convolutional-dense, and convolutional-convolutional layers. We show experiments for a range of classification and regression datasets, which suggest that deeper neural networks are less sensitive to initialization and shallower networks can perform better (sometimes as well as their deeper counterparts) if initialized with FuseInit., Comment: Extended version of the CISS 2020 paper containing the proof for convolutional layers

Localization of wireless transmitters based on channel state information (CSI) fingerprinting finds widespread use in indoor as well as outdoor scenarios. Fingerprinting localization first builds a database containing CSI with measured location information. One then searches for the most similar CSI in this database to approximate the position of wireless transmitters. In this paper, we investigate the efficacy of locality-sensitive hashing (LSH) to reduce the complexity of the nearest neighbor-search (NNS) required by conventional fingerprinting localization systems. More specifically, we propose a low-complexity and memory efficient LSH function based on the sum-to-one (STOne) transform and use approximate hash matches. We evaluate the accuracy and complexity (in terms of the number of searches and storage requirements) of our approach for line-of-sight (LoS) and non-LoS channels, and we show that LSH enables low-complexity fingerprinting localization with comparable accuracy to methods relying on exact NNS or deep neural networks.

Millimeter-wave (mmWave) communication in combination with massive multiuser multiple-input multiple-output (MU-MIMO) enables high-bandwidth data transmission to multiple users in the same time-frequency resource. The strong path loss of wave propagation at such high frequencies necessitates accurate channel state information to ensure reliable data transmission. We propose a novel channel estimation algorithm called BEAmspace CHannel EStimation (BEACHES), which leverages the fact that wave propagation at mmWave frequencies is predominantly directional. BEACHES adaptively denoises the channel vectors in the beamspace domain using an adaptive shrinkage procedure that relies on Stein's unbiased risk estimator (SURE). Simulation results for line-of-sight (LoS) and non-LoS mmWave channels reveal that BEACHES performs on par with state-of-the-art channel estimation methods while requiring orders-of-magnitude lower complexity. To demonstrate the effectiveness of BEACHES in practice, we develop a very large-scale integration (VLSI) architecture and provide field-programmable gate array (FPGA) implementation results. Our results show that adaptive channel denoising can be performed at high throughput and in a hardware-friendly manner for massive MU-MIMO mmWave systems with hundreds of antennas., Comment: To appear in the IEEE Transactions on Circuits and Systems 1

Massive multi-antenna millimeter wave (mmWave) and terahertz wireless systems promise high-bandwidth communication to multiple user equipments in the same time-frequency resource. The high path loss of wave propagation at such frequencies and the fine-grained nature of beamforming with massive antenna arrays necessitates accurate channel estimation to fully exploit the advantages of such systems. In this paper, we propose BEAmspace CHannel EStimation (BEACHES), a low-complexity channel estimation algorithm for multi-antenna mmWave systems and beyond. BEACHES leverages the fact that wave propagation at high frequencies is directional, which enables us to denoise the (approximately) sparse channel state information in the beamspace domain. To avoid tedious parameter selection, BEACHES includes a computationally-efficient tuning stage that provably minimizes the mean-square error of the channel estimate in the large-antenna limit. To demonstrate the efficacy of BEACHES, we provide simulation results for line-of-sight (LoS) and non-LoS mmWave channel models., Comment: Presented at SPAWC 2019

Large multiple-input multiple-output (MIMO) appears in massive multi-user MIMO and randomly-spread code-division multiple access (CDMA)-based wireless systems. In order to cope with the excessively high complexity of optimal data detection in such systems, a variety of efficient yet sub-optimal algorithms have been proposed in the past. In this paper, we propose a data detection algorithm that is computationally efficient and optimal in a sense that it is able to achieve the same error-rate performance as the individually optimal (IO) data detector under certain assumptions on the MIMO system matrix and constellation alphabet. Our algorithm, which we refer to as LAMA (short for large MIMO AMP), builds on complex-valued Bayesian approximate message passing (AMP), which enables an exact analytical characterization of the performance and complexity in the large-system limit via the state-evolution framework. We derive optimality conditions for LAMA and investigate performance/complexity trade-offs. As a byproduct of our analysis, we recover classical results of IO data detection for randomly-spread CDMA. We furthermore provide practical ways for LAMA to approach the theoretical performance limits in realistic, finite-dimensional systems at low computational complexity.

Phase retrieval refers to the problem of recovering real- or complex-valued vectors from magnitude measurements. The best-known algorithms for this problem are iterative in nature and rely on so-called spectral initializers that provide accurate initialization vectors. We propose a novel class of estimators suitable for general nonlinear measurement systems, called linear spectral estimators (LSPEs), which can be used to compute accurate initialization vectors for phase retrieval problems. The proposed LSPEs not only provide accurate initialization vectors for noisy phase retrieval systems with structured or random measurement matrices, but also enable the derivation of sharp and nonasymptotic mean-squared error bounds. We demonstrate the efficacy of LSPEs on synthetic and real-world phase retrieval problems, and show that our estimators significantly outperform existing methods for structured measurement systems that arise in practice., Comment: To appear at ICML 2018, extended version with supplementary material

Phase retrieval deals with the recovery of complex- or real-valued signals from magnitude measurements. As shown recently, the method PhaseMax enables phase retrieval via convex optimization and without lifting the problem to a higher dimension. To succeed, PhaseMax requires an initial guess of the solution, which can be calculated via spectral initializers. In this paper, we show that with the availability of an initial guess, phase retrieval can be carried out with an ever simpler, linear procedure. Our algorithm, called PhaseLin, is the linear estimator that minimizes the mean squared error (MSE) when applied to the magnitude measurements. The linear nature of PhaseLin enables an exact and nonasymptotic MSE analysis for arbitrary measurement matrices. We furthermore demonstrate that by iteratively using PhaseLin, one arrives at an efficient phase retrieval algorithm that performs on par with existing convex and nonconvex methods on synthetic and real-world data., Comment: To be presented at CISS 2018 (http://ee-ciss.princeton.edu/)

Linear minimum mean-square error (L-MMSE) equalization is among the most popular methods for data detection in massive multi-user multiple-input multiple-output (MU-MIMO) wireless systems. While L-MMSE equalization enables near-optimal spectral efficiency, accurate knowledge of the signal and noise powers is necessary. Furthermore, corresponding VLSI designs must solve linear systems of equations, which requires high arithmetic precision, exhibits stringent data dependencies, and results in high circuit complexity. This paper proposes the first VLSI design of the NOnParametric Equalizer (NOPE), which avoids knowledge of the transmit signal and noise powers, provably delivers the performance of L-MMSE equalization for massive MU-MIMO systems, and is resilient to numerous system and hardware impairments due to its parameter-free nature. Moreover, NOPE avoids computation of a matrix inverse and only requires hardware-friendly matrix-vector multiplications. To showcase the practical advantages of NOPE, we propose a parallel VLSI architecture and provide synthesis results in 28nm CMOS. We demonstrate that NOPE performs on par with existing data detectors for massive MU-MIMO that require accurate knowledge of the signal and noise powers., Comment: Presented at the 2017 Asilomar Conference on Signals, Systems, and Computers; 5 pages

This paper deals with linear equalization in massive multi-user multiple-input multiple-output (MU-MIMO) wireless systems. We first provide simple conditions on the antenna configuration for which the well-known linear minimum mean-square error (L-MMSE) equalizer provides near-optimal spectral efficiency, and we analyze its performance in the presence of parameter mismatches in the signal and/or noise powers. We then propose a novel, optimally-tuned NOnParametric Equalizer (NOPE) for massive MU-MIMO systems, which avoids knowledge of the transmit signal and noise powers altogether. We show that NOPE achieves the same performance as that of the L-MMSE equalizer in the large-antenna limit, and we demonstrate its efficacy in realistic, finite-dimensional systems. From a practical perspective, NOPE is computationally efficient and avoids dedicated training that is typically required for parameter estimation, Comment: Will be presented at the 2017 IEEE International Symposium on Information Theory

Real-world transceiver designs for multiple-input multiple-output (MIMO) wireless communication systems are affected by a number of hardware impairments that already appear at the transmit side, such as amplifier non-linearities, quantization artifacts, and phase noise. While such transmit-side impairments are routinely ignored in the data-detection literature, they often limit reliable communication in practical systems. In this paper, we present a novel data-detection algorithm, referred to as large-MIMO approximate message passing with transmit impairments (short LAMA-I), which takes into account a broad range of transmit-side impairments in wireless systems with a large number of transmit and receive antennas. We provide conditions in the large-system limit for which LAMA-I achieves the error-rate performance of the individually-optimal (IO) data detector. We furthermore demonstrate that LAMA-I achieves near-IO performance at low computational complexity in realistic, finite dimensional large-MIMO systems., Comment: Presented at the 53rd Annual Allerton Conference on Communication, Control, and Computing

Optimal data detection in multiple-input multiple-output (MIMO) communication systems with a large number of antennas at both ends of the wireless link entails prohibitive computational complexity. In order to reduce the computational complexity, a variety of sub-optimal detection algorithms have been proposed in the literature. In this paper, we analyze the optimality of a novel data-detection method for large MIMO systems that relies on approximate message passing (AMP). We show that our algorithm, referred to as individually-optimal (IO) large-MIMO AMP (short IO-LAMA), is able to perform IO data detection given certain conditions on the MIMO system and the constellation set (e.g., QAM or PSK) are met., Comment: Presented at the 2015 IEEE International Symposium on Information Theory