Search

Abstract: We report a gas sensor using an anodic TiO2 thin films that were synthesized on Si wafer with Pt electrodes on top. The anodic TiO2 films were prepared through an anodic oxidation in fluoride-ion-containing electrolytes. The obtained material was annealed at 450°C for crystallization. Two Pt electrodes were formed on TiO2 film. The electrical behavior during anodization was measured. The material properties of TiO2 film were studied using a scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). Gas response measurements to hydrogen (10, 100, 1000ppm) were carried out by varying operation temperatures ranging from 30 - 200°C in Ar buffers. The sensor showed a prominent response towards H2 at 200°C. [Copyright &y& Elsevier]

Objective: Appendicoliths are associated with a more complicated course of acute appendicitis and failure of non-operative treatment. We aimed to update the appendicolith classification originally described in 1966 and to assess the association of appendicolith characteristics with appendicitis severity., Design: This prospective predefined MAPPAC-trial (ClinicalTrials.gov NCT03257423) substudy included patients with CT diagnosed appendicitis presenting with an appendicolith. CT visible appendicoliths were harvested at surgery, measured and characterised by morphological examination complemented with micro-CT and micro-X-ray fluorescence spectroscopy. Patients were categorised into two groups: appendicolith appendicitis without other complications and appendicolith appendicitis with complications (appendiceal gangrene, perforation and/or abscess). The association of appendicolith classification and characteristics with appendicitis severity was evaluated., Results: Of 78 patients with a CT appendicolith, 41 appendicoliths were collected and classified based on the degree of hardness into three classes. The hardest appendicoliths (class 3) were less common (19.5%) presenting with a stone-hard outer layer and concentrically layered inner structure around a core. The layered inner structure was also observed in class 2 appendicoliths, but was absent in soft, class 1 appendicoliths. Appendicolith hardness or measures (maximum length, diameter and weight) were not associated with appendicitis severity. The spatial distribution of the main inorganic elements of calcium and phosphorus varied within most appendicoliths., Conclusion: This updated classification confirms categorisation of CT visible appendicoliths into three classes based on their physical and chemical characteristics. The data on clinical and aetiopathological characteristics of appendicoliths is scarce and using this systematic classification would add to this understanding., Competing Interests: Competing interests: EMu is currently working as full-time Medical Advisor for Biocodex Nordics. PS reports receiving personal fees for lectures form Merck and Orion Pharma. AJH reports receiving personal fees for lectures from BioCodex, Merck and Pfizer. All other authors declare no competing interests., (© Author(s) (or their employer(s)) 2024. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Pinosylvin monomethyl ether (PsMME) is a natural compound known for its valuable bioactive properties, including antioxidant and anti-inflammatory effects. However, PsMME's susceptibility to photodegradation upon exposure to ultraviolet (UV) radiation poses a significant limitation to its applications in the pharmaceutical field. This study, for the first time, introduces a strategy to enhance the photostability of PsMME by employing various nanoformulations. We utilized mesoporous silica nanoparticles (MSNs) coated with polydopamine via a poly(ethylene imine) layer (PDA-PEI-MSNs), thermally carbonized porous silicon nanoparticles (TCPSi), and pure mesoporous polydopamine nanoparticles (MPDA). All these nanocarriers exhibit unique characteristics, including the potential for shielding the drug from UV light, which makes them promising for enhancing the photostability of loaded drugs. Here, these three nanoparticles were synthesized and their morphological and physicochemical properties, including size and ζ-potential, were characterized. They were subsequently loaded with PsMME, and the release profiles and kinetics of all three nanoformulations were determined. To assess their photoprotection ability, we employed gas chromatography with a flame ionization detector (GC-FID) and gas chromatography-mass spectrometry (GC-MS) to assess the recovery percentage of loaded PsMME before and after UV exposure for each nanoformulation. Our findings reveal that MPDA exhibits the highest protection ability, with a remarkable 90% protection against UV light on average. This positions MPDA as an ideal carrier for PsMME, and by extension, potentially for other photolabile drugs as well. As a final confirmation of its suitability as a drug nanocarrier, we conducted cytotoxicity evaluations of PsMME-loaded MPDA, demonstrating dose-dependent drug toxicity for this formulation.

Periodontal disease is a significant burden for oral health, causing progressive and irreversible damage to the support structure of the tooth. This complex structure, the periodontium, is composed of interconnected soft and mineralised tissues, posing a challenge for regenerative approaches. Materials combining silicon and lithium are widely studied in periodontal regeneration, as they stimulate bone repair via silicic acid release while providing regenerative stimuli through lithium activation of the Wnt/β-catenin pathway. Yet, existing materials for combined lithium and silicon release have limited control over ion release amounts and kinetics. Porous silicon can provide controlled silicic acid release, inducing osteogenesis to support bone regeneration. Prelithiation, a strategy developed for battery technology, can introduce large, controllable amounts of lithium within porous silicon, but yields a highly reactive material, unsuitable for biomedicine. This work debuts a strategy to lithiate porous silicon nanowires (LipSiNs) which generates a biocompatible and bioresorbable material. LipSiNs incorporate lithium to between 1% and 40% of silicon content, releasing lithium and silicic acid in a tailorable fashion from days to weeks. LipSiNs combine osteogenic, cementogenic and Wnt/β-catenin stimuli to regenerate bone, cementum and periodontal ligament fibres in a murine periodontal defect., (© 2024. The Author(s).)

Children born very preterm have increased risk of developmental difficulties. We examined the parental perception of developmental profile of children born very preterm at 5 and 8 years by using the parental questionnaire Five-to-Fifteen (FTF) compared to full-term controls. We also studied the correlation between these age points. The study included 168 and 164 children born very preterm (gestational age < 32 weeks and/or birth weight ≤ 1500 g) and 151 and 131 full-term controls. The rate ratios (RR) were adjusted for sex and the father's educational level. At 5 and 8 years, children born very preterm were more likely to have higher scores (more difficulties) compared to controls in motor skills (RR = 2.3, CI 95% = 1.8-3.0 at 5 years and RR = 2.2, CI 95% = 1.7-2.9 at 8 years), executive function (1.7, 1.3-2.2 and 1.5, 1.2-2.0), perception (1.9, 1.4-2.5 and 1.9, 1.5-2.5), language (1.5, 1.1-1.9 and 2.2, 1.7-2.9), and social skills (1.4, 1.1-1.8 and 2.1, 1.6-2.7), and at 8 years in learning (1.9, 1.4-2.6) and memory (1.5, 1.2-2.0). There were moderate-to-strong correlations (r = 0.56-0.76, p < 0.001) in all domains between 5 and 8 years in children born very preterm. Our findings suggest that FTF might help to earlier identify children at the greatest risk of incurring developmental difficulties persisting to school-age.

Deep eutectic solvents (DESs) formed by hydrogen bond donors and acceptors are a promising new class of solvents. Both hydrophilic and hydrophobic binary DESs readily absorb water, making them ternary mixtures, and a small water content is always inevitable under ambient conditions. We present a thorough study of a typical hydrophobic DES formed by a 1:2 mole ratio of tetrabutyl ammonium chloride and decanoic acid, focusing on the effects of a low water content caused by absorbed water vapor, using multinuclear NMR techniques, molecular modeling, and several other physicochemical techniques. Already very low water contents cause dynamic nanoscale phase segregation, reduce solvent viscosity and fragility, increase self-diffusion coefficients and conductivity, and enhance local dynamics. Water interferes with the hydrogen-bonding network between the chloride ions and carboxylic acid groups by solvating them, which enhances carboxylic acid self-correlation and ion pair formation between tetrabutyl ammonium and chloride. Simulations show that the component molar ratio can be varied, with an effect on the internal structure. The water-induced changes in the physical properties are beneficial for most prospective applications but water creates an acidic aqueous nanophase with a high halide ion concentration, which may have chemically adverse effects.

Oral insulin delivery could change the life of millions of diabetic patients as an effective, safe, easy-to-use, and affordable alternative to insulin injections, known by an inherently thwarted patient compliance. Here, we designed a multistage nanoparticle (NP) system capable of circumventing the biological barriers that lead to poor drug absorption and bioavailability after oral administration. The nanosystem consists of an insulin-loaded porous silicon NP encapsulated into a pH-responsive lignin matrix, and surface-functionalized with the Fc fragment of immunoglobulin G, which acts as a targeting ligand for the neonatal Fc receptor (FcRn). The developed NPs presented small size (211 ± 1 nm) and narrow size distribution. The NPs remained intact in stomach and intestinal pH conditions, releasing the drug exclusively at pH 7.4, which mimics blood circulation. This formulation showed to be highly cytocompatible, and surface plasmon resonance studies demonstrated that FcRn-targeted NPs present higher capacity to interact and being internalized by the Caco-2 cells, which express FcRn, as demonstrated by Western blot. Ultimately, in vitro permeability studies showed that Fc-functionalized NPs induced an increase in the amount of insulin that permeated across a Caco-2/HT29-MTX co-culture model, showing apparent permeability coefficients ( P app ) of 2.37 × 10 -6  cm/s, over the 1.66 × 10 -6  cm/s observed for their non-functionalized counterparts. Overall, these results demonstrate the potential of these NPs for oral delivery of anti-diabetic drugs., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors.)

Communication between biological components is critical for homeostasis maintenance among the convergence of complicated bio-signals. For therapeutic nanoparticles (NPs), the general lack of effective communication mechanisms with the external cellular environment causes loss of homeostasis, resulting in deprived autonomy, severe macrophage-mediated clearance, and limited tumor accumulation. Here, we develop a multistage signal-interactive system on porous silicon particles through integrating the Self-peptide and Tyr-Ile-Gly-Ser-Arg (YIGSR) peptide into a hierarchical chimeric signaling interface with "don't eat me" and "eat me" signals. This biochemical transceiver can act as both the signal receiver for amantadine to achieve NP transformation and signal conversion as well as the signal source to present different signals sequentially by reversible self-mimicking. Compared with the non-interactive controls, these signal-interactive NPs loaded with AS1411 and tanespimycin (17-AAG) as anticancer drugs improve tumor targeting 2.8-fold and tumor suppression 6.5-fold and showed only 51% accumulation in the liver with restricted hepatic injury., Competing Interests: Declaration of Interests The authors declare no competing interests., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

A nanograined YBCO target, where a great number of grain boundaries, pores etc. exist, is shown to hold an alternative approach to future pulsed laser deposition based high-temperature superconductor thin film and coated conductor technologies. Although the nanograined material is introduced earlier, in this work, we comprehensively demonstrate the modified ablation process, together with unconventional nucleation and growth mechanisms that produces dramatically enhanced flux pinning properties. The results can be generalized to other complex magnetic oxides, where an increased number of defects are needed for modifying their magnetic and electrical properties, thus improving their usability in the future technological challenges.

Background: Approximately 80% of brain tumours are gliomas. Despite treatment, patient mortality remains high due to local metastasis and relapse. It has been shown that transferrin-functionalised porous silicon nanoparticles (Tf@pSiNPs) can inhibit the migration of U87 glioma cells. However, the underlying mechanisms and the effect of glioma cell heterogeneity, which is a hallmark of the disease, on the efficacy of Tf@pSiNPs remains to be addressed., Results: Here, we observed that Tf@pSiNPs inhibited heterogeneous patient-derived glioma cells' (WK1) migration across small perforations (3 μm) by approximately 30%. A phenotypical characterisation of the migrated subpopulations revealed that the majority of them were nestin and fibroblast growth factor receptor 1 positive, an indication of their cancer stem cell origin. The treatment did not inhibit cell migration across large perforations (8 μm), nor cytoskeleton formation. This is in agreement with our previous observations that cellular-volume regulation is a mediator of Tf@pSiNPs' cell migration inhibition. Since aquaporin 9 (AQP9) is closely linked to cellular-volume regulation, and is highly expressed in glioma, the effect of AQP9 expression on WK1 migration was investigated. We showed that WK1 migration is correlated to the differential expression patterns of AQP9. However, AQP9-silencing did not affect WK1 cell migration across perforations, nor the efficacy of cell migration inhibition mediated by Tf@pSiNPs, suggesting that AQP9 is not a mediator of the inhibition., Conclusion: This in vitro investigation highlights the unique therapeutic potentials of Tf@pSiNPs against glioma cell migration and indicates further optimisations that are required to maximise its therapeutic efficacies.

Erythrocyte-based drug delivery systems have been investigated for their biocompatibility, long circulation time, and capability to transport cargo all around the body, thus presenting enormous potential in medical applications. In this study, we investigated hybrid nanoparticles consisting of nano-sized autologous or allogeneic red blood cell (RBC) membranes encapsulating porous silicon nanoparticles (PSi NPs). These NPs were functionalized with a model cancer antigen TRP2, which was either expressed on the surface of the RBCs by a cell membrane-mimicking block copolymer polydimethylsiloxane- b -poly-2-methyl-2-oxazoline, or attached on the PSi NPs, thus hidden within the encapsulation. When in the presence of peripheral blood immune cells, these NPs resulted in apoptotic cell death of T cells, where the NPs having TRP2 within the encapsulation led to a stronger T cell deletion. The deletion of the T cells did not change the relative proportion of CD4 + and cytotoxic CD8 + T cells. Overall, this work shows the combination of nano-sized RBCs, PSi, and antigenic peptides may have use in the treatment of autoimmune diseases., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The analysis of nanoparticles' biocompatibility and immunogenicity is mostly performed under a healthy condition. However, more clinically relevant evaluation conducted under pathological condition is less known. Here, the immunogenicity and bio-nano interactions of porous silicon nanoparticles (PSi NPs) are evaluated in an acute liver inflammation mice model. Interestingly, a new mechanism in which PSi NPs can remit the hepatocellular damage and inflammation activation in a surface dependent manner through protein corona formation, which perturbs the inflammation by capturing the pro-inflammatory signaling proteins that are inordinately excreted or exposed under pathological condition, is found. This signal sequestration further attenuates the nuclear factor κ B pathway activation and cytokines production from macrophages. Hence, the study proposes a potential mechanism for elucidating the altered immunogenicity of nanomaterials under pathological conditions, which might further offer insights to establish harmonized standards for assessing the biosafety of biomaterials in a disease-specific or personalized manner., Competing Interests: The authors declare no conflict of interest., (© 2020 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mortality of glioblastoma multiforme (GBM) has not improved over the last two decades despite medical breakthroughs in the treatment of other types of cancers. Nanoparticles hold tremendous promise to overcome the pharmacokinetic challenges and off-target adverse effects. However, an inhibitory effect of nanoparticles by themselves on metastasis has not been explored. In this study, we developed transferrin-conjugated porous silicon nanoparticles (Tf@pSiNP) and studied their effect on inhibiting GBM migration by means of a microfluidic-based migration chip. This platform, designed to mimic the tight extracellular migration tracts in brain parenchyma, allowed high-content time-resolved imaging of cell migration. Tf@pSiNP were colloidally stable, biocompatible, and their uptake into GBM cells was enhanced by receptor-mediated internalisation. The migration of Tf@pSiNP-exposed cells across the confined microchannels was suppressed, but unconfined migration was unaffected. The pSiNP-induced destabilisation of focal adhesions at the leading front may partially explain the migration inhibition. More corroborating evidence suggests that pSiNP uptake reduced the plasticity of GBM cells in reducing cell volume, an effect that proved crucial in facilitating migration across the tight confined tracts. We believe that the inhibitory effect of Tf@pSiNP on cell migration, together with the drug-delivery capability of pSiNP, could potentially offer a disruptive strategy to treat GBM.

Generation of new neurons by utilizing the regenerative potential of adult neural stem cells (NSCs) and neuroblasts is an emerging therapeutic strategy to treat various neurodegenerative diseases, including neuronal loss after stroke. Committed to neuronal lineages, neuroblasts are differentiated from NSCs and have a lower proliferation rate. In stroke the proliferation of the neuroblasts in the neurogenic areas is increased, but the limiting factor for regeneration is the poor survival of migrating neuroblasts. Survival of neuroblasts can be promoted by small molecules; however, new drug delivery methods are needed to specifically target these cells. Herein, to achieve specific targeting, we have engineered biofunctionalized porous silicon nanoparticles (PSi NPs) conjugated with a specific antibody against polysialylated neural cell adhesion molecule (PSA-NCAM). The PSi NPs loaded with a small molecule drug, SC-79, were able to increase the activity of the Akt signaling pathway in doublecortin positive neuroblasts both in cultured cells and in vivo in the rat brain. This study opens up new possibilities to target drug effects to migrating neuroblasts and facilitate differentiation, maturation and survival of developing neurons. The conjugated PSi NPs are a novel tool for future studies to develop new therapeutic strategies aiming at regenerating functional neurocircuitry after stoke., (Copyright © 2019 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Stencil printing is a commonly used printing method, but it has not previously been used for production of pharmaceuticals. The aim of this study was to explore whether stencil printing of drug containing polymer inks could be used to manufacture flexible dosage forms with acceptable mass and content uniformity. Formulation development was supported by physicochemical characterization of the inks and final dosage forms. The printing of haloperidol (HAL) discs was performed using a prototype stencil printer. Ink development comprised of investigations of ink rheology in combination with printability assessment. The results show that stencil printing can be used to manufacture HAL doses in the therapeutic treatment range for 6-17 year-old children. The therapeutic HAL dose was achieved for the discs consisting of 16% of hydroxypropyl methylcellulose (HPMC) and 1% of lactic acid (LA). The formulation pH remained above pH 4 and the results imply that the drug was amorphous. Linear dose escalation was achieved by an increase in aperture area of the print pattern, while keeping the stencil thickness fixed. Disintegration times of the orodispersible discs printed with 250 and 500 µm thick stencils were below 30 s. In conclusion, stencil printing shows potential as a manufacturing method of pharmaceuticals., Competing Interests: The authors declare no conflict of interest.

Memristors are two terminal electronic components whose conductance depends on the amount of charge that has flown across them over time. This dependence can be gradual, such as in synaptic memristors, or abrupt, as in resistive switching memristors. Either of these memory effects are very promising for the development of a whole new generation of electronic devices. For the successful implementation of practical memristors, however, the development of low cost industry compatible memristive materials is required. Here the memristive properties of differently processed porous silicon structures are presented, which are suitable for different applications. Electrical characterization and SPICE simulations show that laser-carbonized porous silicon shows a strong synaptic memristive behavior influenced by defect diffusion, while wet-oxidized porous silicon has strong resistance switching properties, with switching ratios over 8000. Results show that practical memristors of either type can be achieved with porous silicon whose memristive properties can be adjusted by the proper material processing. Thus, porous silicon may play an important role for the successful realization of practical memristorics with cost-effective materials and processes.

Effective cancer therapies often demand delivery of combinations of drugs to inhibit multidrug resistance through synergism, and the development of multifunctional nanovehicles with enhanced drug loading and delivery efficiency for combination therapy is currently a major challenge in nanotechnology. However, such combinations are more challenging to administer than single drugs and can require multipronged approaches to delivery. In addition to being stable and biodegradable, vehicles for such therapies must be compatible with both hydrophobic and hydrophilic drugs, and release drugs at sustained therapeutic levels. Here, we report synthesis of porous silicon nanoparticles conjugated with gold nanorods [composite nanoparticles (cNPs)] and encapsulate them within a hybrid polymersome using double-emulsion templates on a microfluidic chip to create a versatile nanovehicle. This nanovehicle has high loading capacities for both hydrophobic and hydrophilic drugs, and improves drug delivery efficiency by accumulating at the tumor after i.v. injection in mice. Importantly, a triple-drug combination suppresses breast tumors by 94% and 87% at total dosages of 5 and 2.5 mg/kg, respectively, through synergy. Moreover, the cNPs retain their photothermal properties, which can be used to significantly inhibit multidrug resistance upon near-infrared laser irradiation. Overall, this work shows that our nanovehicle has great potential as a drug codelivery nanoplatform for effective combination therapy that is adaptable to other cancer types and to molecular targets associated with disease progression., Competing Interests: The authors declare no conflict of interest.

Autoxidation of dopamine to polydopamine by dissolved oxygen is a slow process that requires highly alkaline conditions. Polydopamine can be formed rapidly also in mildly acidic and neutral solutions by using redox-active transition-metal ions. We present a comparative study of polydopamine nanoparticles formed by autoxidation and aerobic or anaerobic oxidation in the presence of Ce(IV), Fe(III), Cu(II), and Mn(VII). The UV-vis spectra of the purified nanoparticles are similar, and dopaminechrome is an early intermediate species. At low pH, Cu(II) requires the presence of oxygen and chloride ions to produce polydopamine at a reasonable rate. The changes in dispersibility and surface charge take place at around pH 4, which indicates the presence of ionizable groups, especially carboxylic acids, on their surface. X-ray photoelectron spectroscopy shows the presence of three different classes of carbons, and the carbonyl/carboxylate carbons amount to 5-15 atom %. The N 1s spectra show the presence of protonated free amino groups, suggesting that these groups may interact with the π-electrons of the intact aromatic dihydroxyindole moieties, especially in the metal-induced samples. The autoxidized and Mn(VII)-induced samples do not contain metals, but the metal content is 1-2 atom % in samples prepared with Ce(IV) or Cu(II), and ca. 20 atom % in polydopamine prepared in the presence of Fe(III). These differences in the metal content can be explained by the oxidation and complexation properties of the metals using the general model developed. In addition, the nitrogen content is lower in the metal-induced samples. All of the metal oxidants studied can be used to rapidly prepare polydopamine at room temperature, but the possible influence of the metal content and nitrogen loss should be taken into account.

Mesoporous silicon (PSi) is biocompatible and tailorable material with high potential in drug delivery applications. Here, we report of an evaluation of PSi as a carrier platform for theranostics by delivering a radioactive ion beam- (RIB-) based radioactive lanthanoid into tumors in a mouse model of prostate carcinoma. Thermally hydrocarbonized porous silicon (THCPSi) wafers were implanted with 159 Dy at the facility for radioactive ion beams ISOLDE located at CERN, and the resulting [ 159 Dy]THCPSi was postprocessed into particles. The particles were intratumorally injected into mice bearing prostate cancer xenografts. The stability of the particles was studied in vivo , followed by ex vivo biodistribution and autoradiographic studies. We showed that the process of producing radionuclide-implanted PSi particles is feasible and that the [ 159 Dy]THCPSi particles stay stable and local inside the tumor over seven days. Upon release of 159 Dy from the particles, the main site of accumulation is in the skeleton, which is in agreement with previous studies on the biodistribution of dysprosium. We conclude that THCPSi particles are a suitable platform together with RIB-based radiolanthanoids for theranostic purposes as they are retained after administration inside the tumor and the radiolanthanoid remains embedded in the THCPSi.

Orally administrable drug delivery vehicles are developed to manage incurable inflammatory bowel disease (IBD), however, their therapeutic outcomes are compromised by the side effects of systemic drug exposure. Herein, we use hyaluronic acid functionalized porous silicon nanoparticle to bridge enzyme-responsive hydrogel and pH-responsive polymer, generating a hierarchical structured (nano-in-nano-in-micro) vehicle with programmed properties to fully and sequentially overcome the multiple obstacles for efficiently delivering drugs locally to inflamed sites of intestine. After oral administration, the pH-responsive matrix protects the embedded hybrid nanoparticles containing drug loaded hydrogels against the spatially variable physiological environments of the gastrointestinal tract until they reach the inflamed sites of intestine, preventing premature drug release. The negatively charged hybrid nanoparticles selectively target the inflamed sites of intestine, and gradually release drug in response to the microenvironment of inflamed intestine. Overall, the developed hierarchical structured and programmed vehicles load, protect, transport and release drugs locally to inflamed sites of intestine, contributing to superior therapeutic outcomes. Such strategy could also inspire the development of numerous hierarchical structured vehicles by other porous nanoparticles and stimuli-responsive materials for the local delivery of various drugs to treat plenty of inflammatory gastrointestinal diseases, including IBD, gastrointestinal cancers and viral infections., (Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Transcription factors are fundamental regulators of gene transcription, and many diseases, such as heart diseases, are associated with deregulation of transcriptional networks. In the adult heart, zinc-finger transcription factor GATA4 is a critical regulator of cardiac repair and remodelling. Previous studies also suggest that NKX2-5 plays function role as a cofactor of GATA4. We have recently reported the identification of small molecules that either inhibit or enhance the GATA4-NKX2-5 transcriptional synergy. Here, we examined the cardiac actions of a potent inhibitor (3i-1000) of GATA4-NKX2-5 interaction in experimental models of myocardial ischemic injury and pressure overload. In mice after myocardial infarction, 3i-1000 significantly improved left ventricular ejection fraction and fractional shortening, and attenuated myocardial structural changes. The compound also improved cardiac function in an experimental model of angiotensin II -mediated hypertension in rats. Furthermore, the up-regulation of cardiac gene expression induced by myocardial infarction and ischemia reduced with treatment of 3i-1000 or when micro- and nanoparticles loaded with 3i-1000 were injected intramyocardially or intravenously, respectively. The compound inhibited stretch- and phenylephrine-induced hypertrophic response in neonatal rat cardiomyocytes. These results indicate significant potential for small molecules targeting GATA4-NKX2-5 interaction to promote myocardial repair after myocardial infarction and other cardiac injuries.

Silicon-based mesoporous nanoparticles have been extensively studied to meet the challenges in the drug delivery. Functionality of these nanoparticles depends on their properties which are often changing as a function of particle size and surrounding medium. Widely used characterization methods, dynamic light scattering (DLS), and transmission electron microscope (TEM) have both their weaknesses. We hypothesize that conventional light scattering (LS) methods can be used for a rigorous characterization of medium sensitive nanoparticles' properties, like size, stability, and porosity. Two fundamentally different silicon-based nanoparticles were made: porous silicon (PSi) from crystalline silicon and silica nanoparticles (SN) through sol-gel process. We studied the properties of these mesoporous nanoparticles with two different multiangle LS techniques, DLS and static light scattering (SLS), and compared the results to dry-state techniques, TEM, and nitrogen sorption. Comparison of particle radius from TEM and DLS revealed significant overestimation of the DLS result. Regarding to silica nanoparticles, the overestimation was attributed to agglomeration by analyzing radius of gyration and hydrodynamic radius. In case of PSi nanoparticles, strong correlation between LS result and specific surface area was found. Our results suggest that the multiangle LS methods could be used for the size, stability, and structure characterization of mesoporous nanoparticles.

Aim: To evaluate the chemotherapeutic potential of a novel multifunctional nanocomposite encapsulating both porous silicon (PSi) and gold (Au) nanoparticles in a polymeric nanocomplex., Materials & Methods: The nanocomposite was physicochemically characterized and evaluated in vitro for biocompatibility, cellular internalization, endosomolytic properties, cytoplasmatic drug delivery and chemotherapeutic efficacy., Results: The nanocomposites were successfully produced and exhibited adequate physicochemical properties and superior in vitro cyto- and hemocompatibilities. The encapsulation of PSi nanoparticles in the nanocomplexes significantly enhanced their cellular internalization and enabled their endosomal escape, resulting in the efficient cytoplasmic delivery of these nanosystems. Sorafenib-loaded nanocomposites showed a potent in vitro antiproliferative effect on MDA-MB-231 breast cancer cells., Conclusion: The multifunctional nanocomposite herein presented exhibits great potential as a chemotherapeutic nanoplatform.

Harsh conditions of the gastrointestinal tract hinder the oral delivery of many drugs. Developing oral drug delivery systems based on commercially available materials is becoming more challenging due to the demand for simultaneously delivering physicochemically different drugs for treating complex diseases. A novel architecture, namely nanotube-in-microsphere, was developed as a drug delivery platform by encapsulating halloysite nanotubes (HNTs) in a pH-responsive hydroxypropyl methylcellulose acetate succinate polymer using microfluidics. HNTs were selected as orally acceptable clay mineral and their lumen was enlarged by selective acid etching. Model drugs (atorvastatin and celecoxib) with different physicochemical properties and synergistic effect on colon cancer prevention and inhibition were simultaneously incorporated into the microspheres at a precise ratio, with atorvastatin and celecoxib being loaded in the HNTs and polymer matrix, respectively. The microspheres showed spherical shape, narrow particle size distribution and pH-responsive dissolution behavior. This nanotube/pH-responsive polymer composite protected the loaded drugs from premature release at pH⩽6.5, but allowed their fast release and enhanced the drug permeability, and the inhibition of colon cancer cell proliferation at pH 7.4. Overall, the nano-in-micro drug delivery composite fabricated by microfluidics is a promising and flexible platform for the delivery of multiple drugs for combination therapy., Statement of Significance: Halloysite nanotubes (HNTs) are attracting increasing attention for drug delivery applications. However, conventional HNTs-based oral drug delivery systems are lack of the capability to precisely control the drug release at a desired site in the gastrointestinal tract. In this study, a nanotube-in-microsphere drug delivery platform is developed by encapsulating HNTs in a pH-responsive polymer using microfluidics. Drugs with different physicochemical properties and synergistic effect on colon cancer therapy were simultaneously incorporated in the microspheres. The prepared microspheres prevented the premature release of the loaded drugs after exposure to the harsh conditions of the gastrointestinal tract, but allowed their simultaneously fast release, and enhanced the drug permeability and the inhibition of colon cancer cell proliferation in response to the colon pH., (Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Nanotechnology based drug delivery systems are anticipated to overcome the persistent challenges in oral protein and peptide administration, and lead to the development of long awaited non-invasive therapies. Herein, an advanced single-step aerosol flow reactor based technology was used to develop a multifunctional site specific dual protein-drug delivery nanosystem. For this purpose, mucoadhesive porous silicon (PSi) nanoparticles encapsulated into a pH-responsive polymeric nanomatrix was developed for advanced oral type 2 diabetes mellitus therapy with an antidiabetic peptide, glucagon like peptide-1 (GLP-1), and the enzyme inhibitor, dipeptidyl peptidase-4 (DPP4). Chitosan surface modification inherited the mucoadhesiveness to the nanosystem which led to enhanced cellular interactions and increased cellular compatibility. An advanced aerosol flow reactor technology was used to encapsulate the chitosan modified nanoparticles into an enteric polymeric nanomatrix. The pH-sensitive polymeric matrix simultaneously prevented the gastric degradation of the encapsulated peptide and also preserved the mucoadhesive functionality of the chitosan-modified PSi nanoparticles in the harsh stomach environment. The multidrug loaded nanosystem showed augmented intestinal permeability of GLP-1, evaluated in an in vitro cell-based intestinal epithelium model, attributed to the permeation enhancer effect of chitosan and inhibition of GLP-1 degradation by the DPP4 inhibitor. The applied technology resulted in the development of a dual-drug delivery nanosystem that synergizes the antidiabetic effect of the loaded peptide and the enzyme inhibitor, thereby indicating high clinical potential of the system and preparation technique., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

An advanced nanocomposite consisting of an encapsulated porous silicon (PSi) nanoparticle and an acid-degradable acetalated dextran (AcDX) matrix (nano-in-nano), was efficiently fabricated by a one-step microfluidic self-assembly approach. The obtained nano-in-nano PSi@AcDX composites showed improved surface smoothness, homogeneous size distribution, and considerably enhanced cytocompatibility. Furthermore, multiple drugs with different physicochemical properties have been simultaneously loaded into the nanocomposites with a ratiometric control. The release kinetics of all the payloads was predominantly controlled by the decomposition rate of the outer AcDX matrix. To facilitate the intracellular drug delivery, a nona-arginine cell-penetrating peptide (CPP) was chemically conjugated onto the surface of the nanocomposites by oxime click chemistry. Taking advantage of the significantly improved cell uptake, the proliferation of two breast cancer cell lines was markedly inhibited by the CPP-functionalized multidrug-loaded nanocomposites. Overall, this nano-in-nano PSi@polymer composite prepared by the microfluidic self-assembly approach is a universal platform for nanoparticles encapsulation and precisely controlled combination chemotherapy., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Given the established role of Chlamydia spp. as causative agents of both acute and chronic diseases, search for new antimicrobial agents against these intracellular bacteria is required to promote human health. Isoflavones are naturally occurring phytoestrogens, antioxidants and efflux pump inhibitors, but their therapeutic use is limited by poor water-solubility and intense first-pass metabolism. Here, we report on effects of isoflavones against C. pneumoniae and C. trachomatis and describe buccal permeability and initial formulation development for biochanin A. Biochanin A was the most potent Chlamydia growth inhibitor among the studied isoflavones, with an IC50 = 12 µM on C. pneumoniae inclusion counts and 6.5 µM on infectious progeny production, both determined by immunofluorescent staining of infected epithelial cell cultures. Encouraged by the permeation of biochanin A across porcine buccal mucosa without detectable metabolism, oromucosal film formulations were designed and prepared by a solvent casting method. The film formulations showed improved dissolution rate of biochanin A compared to powder or a physical mixture, presumably due to the solubilizing effect of hydrophilic additives and presence of biochanin A in amorphous state. In summary, biochanin A is a potent inhibitor of Chlamydia spp., and the in vitro dissolution results support the use of a buccal formulation to potentially improve its bioavailability in antichlamydial or other pharmaceutical applications.

In this study, the ability of porous silicon nanoparticles (PSi NPs) to entrap and deliver nitric oxide (NO) as an effective antibacterial agent is tested against different Gram-positive and Gram-negative bacteria. NO was entrapped inside PSi NPs functionalized by means of the thermal hydrocarbonization (THC) process. Subsequent reduction of nitrite in the presence of d-glucose led to the production of large NO payloads without reducing the biocompatibility of the PSi NPs with mammalian cells. The resulting PSi NPs demonstrated sustained release of NO and showed remarkable antibacterial efficiency and anti-biofilm-forming properties. These results will set the stage to develop antimicrobial nanoparticle formulations for applications in chronic wound treatment.

: Thermally promoted addition of undecylenic acid is studied as a method for modifying porous silicon optical reflectors that have been pre-treated with thermal hydrocarbonization. Successful derivatization of undecylenic acid is demonstrated and confirmed with Fourier transform infrared and X-ray photoelectron spectroscopies. The results indicate that the hydrocarbonization pre-treatment considerably improves stability against oxidation and chemical dissolution in basic environments. The two-step treatment also does not cause an appreciable change on sample reflectance spectra, which enables the use of the functionalized structures in optical sensing applications.

Porous silicon (PSi) particles have been widely used in modulating the dissolution rate of various types of drugs loaded within its mesopores. This material can be surface treated in order to vary its hydrophobicity and several other properties, such as drug loading degree and release rate. Hydrophobins are a family of self-assembling proteins of fungal origin which have the ability to form layers on hydrophobic materials. This type of protein layer can modify the characteristics and control the binding properties of the surface on which it assembles. In this study, we have developed a procedure to coat thermally hydrocarbonized-PSi microparticles with hydrophobin II (HFBII) in order to modify the particles' hydrophobicity and to improve their biocompatibility, while maintaining intact the advantageous drug releasing properties of the PSi. The HFBII content adsorbed onto the particles was successfully quantified by a protein assay. Drug dissolution and permeation across Caco-2 cell monolayers were also conducted, together with viability studies in AGS, Caco-2 and HT-29 cells. The characterization and coating stability assessment showed that the HFBII-coating desorbs partially from the particles' surface as the pH increases. The HFBII coating also improved the biocompatibility of the particles without compromising the enhanced drug permeation or release., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Mesoporous silicon particles hold great potential in improving the solubility of otherwise poorly soluble drugs. To effectively translate this feature into the clinic, especially via oral or parenteral administration, a thorough understanding of the interactions of the micro- and nanosized material with the physiological environment during the delivery process is required. In the present study, the behaviour of thermally oxidized porous silicon particles of different sizes interacting with Caco-2 cells (both non-differentiated and polarized monolayers) was investigated in order to establish their fate in a model of intestinal epithelial cell barrier. Particle interactions and TNF-α were measured in RAW 264.7 macrophages, while cell viabilities, reactive oxygen species and nitric oxide levels, together with transmission electron microscope images of the polarized monolayers, were assessed with both the Caco-2 cells and RAW 264.7 macrophages. The results showed a concentration and size dependent influence on cell viability and ROS-, NO- and TNF-α levels. There was no evidence of the porous nanoparticles crossing the Caco-2 cell monolayers, yet increased permeation of the loaded poorly soluble drug, griseofulvin, was shown., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

We report here the in vitro cytotoxicity of mesoporous silicon (PSi) microparticles on the Caco-2 cells as a function of particle size fractions (1.2-75 microm), particle concentration (0.2-4 mg ml(-1)) and incubation times (3, 11 and 24 h). The particle size (smaller PSi particles showed higher cytotoxicity) and the surface chemistry treatment of the PSi microparticles were considered to be the key factors regarding the toxicity aspects. These effects were significant after the 11 and 24 h exposure times, and were explained by cell-particle interactions involving mitochondrial disruption resulting from ATP depletion and reactive oxygen species production induced by the PSi surface. These events further induced an increase in cell apoptosis and consequent cell damage and cell death in a dose-dependent manner and as a function of the PSi particle size. These effects were, however, less pronounced with thermally oxidized PSi particles. Under the experimental conditions tested and at particle sizes >25 microm, the non-toxic threshold concentration for thermally hydrocarbonized and carbonized PSi particles was <2 mg ml(-1), and for thermally oxidized PSi microparticles was <4 mg ml(-1)., (Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

In the present work, porous silicon (PS) based Bragg reflectors are fabricated, and the reactive PS surface is passivated by means of thermal carbonization (TC) by acetylene decomposition. The gas sensing properties of the reflectors are studied with different gas compositions and concentrations. Based on the results it can be concluded that thermally carbonized Bragg reflectors provide an easy and inexpensive means to produce chemically stable high quality PS reflectors with good gas sensing properties, which differ from those of unpassivated PS reflectors.