Search

Particle acceleration in dielectric microstructures powered by infrared lasers, or "dielectric laser acceleration" (DLA), is a promising area of advanced accelerator research with the potential to enable more affordable and higher-gradient accelerators for energy frontier science and a variety of other applications. DLA leverages well-established industrial fabrication capabilities and the commercial availability of tabletop lasers to reduce cost, with axial accelerating fields in the GV/m range. Desirable luminosities would be obtained by operating with very low charge per bunch but at extremely high repetition rates. And as a consequence of its unique operating parameter regime, coupling of the laser to the accelerator can potentially be in the 50\% range and with low beamstrahlung energy loss due at the interaction point, making DLA a promising approach for a future multi-TeV linear collider., Comment: 25 pages, 5 figures

Femtosecond laser excitation of solid-state systems creates non-equilibrium hot electrons that cool down by transferring their energy to other degrees of freedom and ultimately to lattice vibrations of the solid. By combining ab initio calculations with ultrafast diffuse electron scattering we gain a detailed understanding of the complex non-equilibrium energy transfer between electrons and phonons in laser-excited Ni metal. Our experimental results show that the wavevector resolved population dynamics of phonon modes is distinctly different throughout the Brillouin zone and are in remarkable agreement with our theoretical results. We find that zone-boundary phonon modes become occupied first. As soon as the energy in these modes becomes larger than the average electron energy a backflow of energy from lattice to electronic degrees of freedom occurs. Subsequent excitation of lower-energy phonon modes drives the thermalization of the whole system on the picosecond timescale. We determine the evolving non-equilibrium phonon occupations which we find to deviate markedly from thermal occupations.

We present the first demonstration of THz-driven bunch compression and timing stabilization of a few-fC relativistic electron beam with kinetic energy of 2.5 MeV using quasi-single-cycle strong field THz radiation in a shorted parallel-plate structure. Compression by nearly a factor of 3 produced a 39 fs rms bunch length and a reduction in timing jitter by more than a factor of 2, to 31 fs rms, offering a significant improvement to beam performance for applications like ultrafast electron diffraction. This THz-driven technique provides a critical step towards unprecedented timing resolution in ultrafast sciences and other accelerator applications using femtosecond-scale electron beams., Comment: 6 pages, 5 figures

We demonstrate the ability to create electron beams with high-contrast, nanometer-scale density modulations as a first step toward developing full control of the phase fronts of an x-ray free-electron laser. The nanopatterned electron beams are produced by diffracting electrons through thin single-crystal silicon membranes that are lithographically patterned to different thicknesses. For transform-limited x-ray production the desired pattern is a series of regularly spaced lines (i.e. a grating) that generate uniformly spaced nanobunches of electrons, however nearly any pattern can be etched in the silicon, such as frequency-chirps or multiple patterns of different colors or line spacings. When these patterns are transferred from the spatial to the temporal dimension by accelerator electromagnetic optics they will control the phase fronts of coherent x-rays, giving unprecedented deterministic control over the phase of ultrashort x-ray pulses. In short, this method allows the time-structure for a fully coherent x-ray beam to be generated from a pattern written on a semiconductor wafer by lithography., Comment: 5 pages, 5 figures

Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions by varying the intensity of different reflections using parameters such as crystallographic orientation and wafer thickness, then selecting specific spots in the diffraction plane using apertures. The patterned electron beams can be used to control phase and amplitude of subsequent x-ray emission, enabling novel coherent x-ray methods. The electrons themselves can also be used for femtosecond time resolved diffraction and microscopy. As a first step toward patterned beams, we demonstrate experimentally and through simulation the ability to accurately predict and control diffraction spot intensities. We simulate MeV transmission electron diffraction patterns using the multislice method for various crystallographic orientations of a single crystal Si(100) membrane near beam normal. The resulting intensity maps of the Bragg reflections are compared to experimental results obtained at the Accelerator Structure Test Area Ultrafast Electron Diffraction (ASTA UED) facility at SLAC. Furthermore, the fraction of inelastic and elastic scattering of the initial charge is estimated along with the absorption of the membrane to determine the contrast that would be seen in a patterned version of the Si(100) membrane., Comment: 7 pages, 4 figures; Revised parts of the introduction to better explain the dynamical beam stop, results unchanged, corrected some typos; added to the acknowledgements, changed source cited

Formation of electronic nematicity is a common thread of unconventional superconductors. In iron-based materials, the long-range nematic order is revealed by the orthorhombic lattice distortion, which importance is a highly controversial topic due the small magnitude of the distortion. Here, we study the local crystal structure of FeSe and its interaction with electronic degrees of freedom using ultrafast electron diffraction, x-ray pair distribution function analysis, and transmission electron microscopy and find a significant lattice response to local nematicity. The study demonstrates how local lattice distortions, which exist even at temperatures above the nematic phase transition, can be released by photoexcitation, leading to an enhancement of the crystalline order. The observed local atomic structures and their out-of-equilibrium behavior unravel a sophisticated coupling between the lattice and nematic order parameter in FeSe.

The ultrafast photoinduced ring-opening of 1,3-cyclohexadiene constitutes a textbook example of electrocyclic reactions in organic chemistry and a model for photobiological reactions in vitamin D synthesis. Here, we present direct and unambiguous observation of the ring-opening reaction path on the femtosecond timescale and sub-{\AA}ngstr\"om length scale by megaelectronvolt ultrafast electron diffraction. We follow the carbon-carbon bond dissociation and the structural opening of the 1,3-cyclohexadiene ring by direct measurement of time-dependent changes in the distribution of interatomic distances. We observe a substantial acceleration of the ring-opening motion after internal conversion to the ground state due to steepening of the electronic potential gradient towards the product minima. The ring-opening motion transforms into rotation of the terminal ethylene groups in the photoproduct 1,3,5-hexatriene on the sub-picosecond timescale. Our work demonstrates the potential of megaelectronvolt ultrafast electron diffraction to elucidate photochemical reaction paths in organic chemistry.

Photons, electrons, and their interplay are at the heart of photonic devices and modern instruments for ultrafast science [1-10]. Nowadays, electron beams of the highest intensity and brightness are created by photoemission with short laser pulses, and then accelerated and manipulated using GHz radiofrequency electromagnetic fields. The electron beams are utilized to directly map photoinduced dynamics with ultrafast electron scattering techniques, or further engaged for coherent radiation production at up to hard X-ray wavelengths [11-13]. The push towards improved timing precision between the electron beams and pump optical pulses though, has been stalled at the few tens of femtosecond level, due to technical challenges with synchronizing the high power rf fields with optical sources. Here, we demonstrate attosecond electron metrology using laser-generated single-cycle THz radiation, which is intrinsically phase locked to the optical drive pulses, to manipulate multi-MeV relativistic electron beams. Control and single-shot characterization of bright electron beams at this unprecedented level open up many new opportunities for atomic visualization.

Pump-probe electron energy-loss spectroscopy (EELS) with femtosecond temporal resolution will be a transformative research tool for studying non-equilibrium chemistry and electronic dynamics of matter. In this paper, we propose a new concept of femtosecond EELS utilizing mega-electron-volt electron beams from a radio-frequency (rf) photocathode source. The high acceleration gradient and high beam energy of the rf gun are critical to the generation of 10-femtosecond electron beams, which enables improvement of the temporal resolution by more than one order of magnitude beyond the state of the art. The major innovation in our proposal - the `reference-beam technique', relaxes the energy stability requirement on the rf power source by roughly two orders of magnitude. Requirements on the electron beam quality, photocathode, spectrometer and detector are also discussed. Supported by particle-tracking simulations, we demonstrate the feasibility of achieving sub-electron-volt energy resolution and ~10-femtosecond temporal resolution with existing or near-future hardware performances.

Instruments to visualize transient structural changes of inhomogeneous materials on the nanometer scale with atomic spatial and temporal resolution are demanded to advance materials science, bioscience, and fusion sciences. One such technique is femtosecond electron microdiffraction, in which a short pulse of electrons with femtosecond-scale duration is focused into a micron-scale spot and used to obtain diffraction images to resolve ultrafast structural dynamics over localized crystalline domain. In this letter, we report the experimental demonstration of time-resolved mega-electron-volt electron microdiffraction which achieves a 5 {\mu}m root-mean-square (rms) beam size on the sample and a 100 fs rms temporal resolution. Using pulses of 10k electrons at 4.2 MeV energy with a normalized emittance 3 nm-rad, we obtained high quality diffraction from a single 10 {\mu}m paraffin (C_44 H_90) crystal. The phonon softening mode in optical-pumped polycrystalline Bi was also time-resolved, demonstrating the temporal resolution limits of our instrument design. This new characterization capability will open many research opportunities in material and biological sciences.

Transitions between different charge density wave (CDW) states in quasi-two-dimensional materials may be accompanied also by changes in the inter-layer stacking of the CDW. Using MeV ultrafast electron diffraction, the out-of-plane stacking order dynamics in the quasi-two-dimensional dichalcogenide 1T-TaS$_2$ is investigated for the first time. From the intensity of the CDW satellites aligned around the commensurate $l$ = 1/6 characteristic stacking order, it is found out that this phase disappears with a 0.5 ps time constant. Simultaneously, in the same experiment, the emergence of the incommensurate phase, with a slightly slower 2.0 ps time constant, is determined from the intensity of the CDW satellites aligned around the incommensurate $l$ = 1/3 characteristic stacking order. These results might be of relevance in understanding the metallic character of the laser-induced metastable "hidden" state recently discovered in this compound.

We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permanent magnet quadrupoles with nearly 600 T/m field gradients. These results pave the way to- wards single shot time-resolved electron microscopy and open new opportunities in the applications of high brightness electron beams., Comment: 5 pages, 6 figures

We use ultrafast x-ray and electron diffraction to disentangle spin-lattice coupling of granular FePt in the time domain. The reduced dimensionality of single-crystalline FePt nanoparticles leads to strong coupling of magnetic order and a highly anisotropic three-dimensional lattice motion characterized by a- and b-axis expansion and c-axis contraction. The resulting increase of the FePt lattice tetragonality, the key quantity determining the energy barrier between opposite FePt magnetization orientations, persists for tens of picoseconds. These results suggest a novel approach to laser-assisted magnetic switching in future data storage applications., Comment: 12 pages, 4 figures

Pushing the limits in temporal resolution for transmission electron microscopy (TEM) requires a revolutionary change in the electron source technology. In this paper we study the possibility of employing a radiofrequency photoinjector as the electron source for a time-resolved TEM. By raising the beam energy to the relativistic regime we minimize the space charge effects which otherwise limit the spatio-temporal resolution of the instrument. Analysis and optimization of the system taking into account the achievable beam brightness, electron flux on the sample, chromatic and spherical aberration of the electron optic system, and space charge effects in image formation are presented and supported by detailed numerical modeling. The results demonstrate the feasibility of 10 nanometer - 10 picosecond spatio-temporal resolution single-shot MeV TEM.