Search

The current gold standard for COVID-19 confirmation is RT-PCR, which possesses high sensitivity and specificity, but a long turnaround time has been a drawback. Here, we introduce a nanoPCR platform that can yield breakthroughs in RT-PCR speed and decentralize the diagnostic testing. A key innovation is to exploit magneto-plasmonic nanoparticles for dual purposes: fast thermocycling through plasmonic heating and enhanced signal detection via magnetic fluorescence switch. We further integrated these functionalities into a portable system to streamline point-of-care (POC) COVID-19 diagnostics with a “one-step-finish” approach from sampling to result. When applied with clinical COVID-19 samples, nanoPCR achieved an analytical performance of sensitivity and specificity comparable to that of a benchtop instrument but completed the entire detection within 18 minutes (vs. 2.5 hours for regular RT-PCR), which makes it ideal for rapid POC diagnostics. This platform technology is readily scalable for higher throughput and expandable to other disease targets, promising broader impacts in on-site molecular testing.

Photolithography is the prevalent microfabrication technology. It needs to meet resolution and yield demands at a cost that makes it economically viable. However, conventional far-field photolithography has reached the diffraction limit, which imposes complex optics and short-wavelength beam source to achieve high resolution at the expense of cost efficiency. Here, we present a cost-effective near-field optical printing approach that uses metal patterns embedded in a flexible elastomer photomask with mechanical robustness. This technique generates sub-diffraction patterns that are smaller than 1/10th of the wavelength of the incoming light. It can be integrated into existing hardware and standard mercury lamp, and used for a variety of surfaces, such as curved, rough and defect surfaces. This method offers a higher resolution than common light-based printing systems, while enabling parallel-writing. We anticipate that it will be widely used in academic and industrial productions., Photolithography is an established microfabrication technique but commonly uses costly shortwavelength light sources to achieve high resolution. Here the authors use metal patterns embedded in a flexible elastomer photomask with mechanical robustness for generation of subdiffraction patterns as a cost effective near-field optical printing approach.

Adherens junctions (AJs) create spatially and mechanically discrete microdomains at the interfaces of cells. Using a mechanogenetic platform that generates artificial AJs with controlled protein localization, clustering, and mechanical loading, we report that AJs also organize proteolytic hotspots for γ-secretase with a spatially-regulated substrate selectivity that is critical in the processing of Notch and other transmembrane proteins. Membrane microdomains outside of AJs exclusively organize Notch ligand-receptor engagement (LRE-µdomain) to initialize receptor activation. Conversely, membrane microdomains within AJs exclusively serve to coordinate regulated intramembrane proteolysis (RIP-µdomain). They do so by concentrating γ-secretase and primed receptors while excluding full-length Notch. AJs induce these functionally distinct microdomains by means of cholesterol-dependent γ-secretase recruitment and size-dependent protein segregation. By excluding full-length Notch from RIP-µdomains, AJs prevents inappropriate enzyme-substrate interactions and suppresses spurious Notch activation. Ligand-induced ectodomain shedding eliminates size-dependent segregation, releasing Notch to translocate into AJs for processing by γ-secretase. This mechanism directs radial differentiative expansion of ventricular zone-neural progenitor cells in vivo and more broadly regulates the proteolysis of large cell-surface receptors like amyloid precursor protein. These findings suggest an unprecedented role of AJs in creating size-selective spatial switches that choreograph γ-secretase processing of multiple transmembrane proteins regulating development, homeostasis, and disease.

Tetrahydrocannabinol (THC), the primary psychoactive ingredient of cannabis, impairs cognitive and motor function in a concentration-dependent fashion. Drug testing is commonly performed for employment and law enforcement purposes; however, available tests produce low-sensitive binary results (lateral flow assays) or have long turnaround (gas chromatography-mass spectrometry). To enable on-site THC quantification in minutes, we developed a rapid assay for oral THC analysis called EPOCH, express probe for on-site cannabis inhalation. EPOCH features distinctive sensor design such as a radial membrane and transmission optics, all contained in a compact cartridge. This integrated approach permitted assay completion within 5 minutes with a detection limit of 0.17 ng/mL THC, which is below the regulatory guideline (1 ng/mL). As a proof of concept for field testing, we applied EPOCH to assess oral fluid samples from cannabis users (n = 43) and controls (n = 43). EPOCH detected oral THC in all specimens from cannabis smokers (median concentration, 478 ng/mL) and THC-infused food consumers. Longitudinal monitoring showed a fast drop in THC concentrations within the first 6 hours of cannabis smoking (half-life, 1.4 hours).

Multifunctional magnetic nanoparticles have shown great promise as next-generation imaging and perturbation probes for deciphering molecular and cellular processes. As a consequence of multicomponent integration into a single nanosystem, pre-existing nanoprobes are typically large and show limited access to biological targets present in a crowded microenvironment. Here, we apply organic-phase surface PEGylation, click chemistry, and charge-based valency discrimination principles to develop compact, modular, and monovalent magnetofluorescent nanoparticles (MFNs). We show that MFNs exhibit highly efficient labeling to target receptors present in cells with a dense and thick glycocalyx layer. We use these MFNs to interrogate the E-cadherin-mediated adherens junction formation and F-actin polymerization in a three-dimensional space, demonstrating the utility as modular and versatile mechanogenetic probes in the most demanding single-cell perturbation applications.

Scanning probe microscopy techniques, such as atomic force microscopy and scanning tunnelling microscopy, are harnessed to image nanoscale structures with an exquisite resolution, which has been of significant value in a variety of areas of nanotechnology. These scanning probe techniques, however, are not generally suitable for high-throughput imaging, which has, from the outset, been a primary challenge. Traditional approaches to increasing the scalability have involved developing multiple probes for imaging, but complex probe design and electronics are required to carry out the detection method. Here, we report a probe-based imaging method that utilizes scalable cantilever-free elastomeric probe design and hierarchical measurement architecture, which readily reconstructs high-resolution and high-throughput topography images. In a single scan, we demonstrate imaging with a 100-tip array to obtain 100 images over a 1-mm2 area with 106 pixels in less than 10 min. The potential for large-scale tip integration and the advantage of a simple probe array suggest substantial promise for our approach to high-throughput imaging far beyond what is currently possible.

Prompt diagnosis, patient isolation, and contact tracing are key measures to contain the coronavirus disease 2019 (COVID-19). Molecular tests are the current gold standard for COVID-19 detection, but are carried out at central laboratories, delaying treatment and control decisions. Here we describe a portable assay system for rapid, onsite COVID-19 diagnosis. Termed CODA (CRISPR Optical Detection of Anisotropy), the method combined isothermal nucleic acid amplification, activation of CRISPR/Cas12a, and signal generation in a single assay, eliminating extra manual steps. Importantly, signal detection was based on the ratiometric measurement of fluorescent anisotropy, which allowed CODA to achieve a high signal-to-noise ratio. For point-of-care operation, we built a compact, standalone CODA device integrating optoelectronics, an embedded heater, and a microcontroller for data processing. The developed system completed SARS-CoV-2 RNA detection within 20 min of sample loading; the limit of detection reached 3 copy/μL. When applied to clinical samples (10 confirmed COVID-19 patients; 10 controls), the rapid CODA test accurately classified COVID-19 status, in concordance with gold-standard clinical diagnostics., Highlights • We developed a CODA (CRISPR Optical Detection of Anisotropy) system for point-of-care COVID-19 diagnostics. • CODA detected SARS-CoV-2 RNA down to 3 copy/μL within 20 min in a one-pot assay. • CODA assays accurately identified COVID-19 when applied to patient samples (n = 20).

This study presents a smart, soft contact lens that provides real-time sensing for the wireless immunosensing of cortisol., Despite various approaches to immunoassay and chromatography for monitoring cortisol concentrations, conventional methods require bulky external equipment, which limits their use as mobile health care systems. Here, we describe a human pilot trial of a soft, smart contact lens for real-time detection of the cortisol concentration in tears using a smartphone. A cortisol sensor formed using a graphene field-effect transistor can measure cortisol concentration with a detection limit of 10 pg/ml, which is low enough to detect the cortisol concentration in human tears. In addition, this soft contact lens only requires the integration of this cortisol sensor with transparent antennas and wireless communication circuits to make a smartphone the only device needed to operate the lens remotely without obstructing the wearer’s view. Furthermore, in vivo tests using live rabbits and the human pilot experiment confirmed the good biocompatibility and reliability of this lens as a noninvasive, mobile health care solution.

Aberrant cleavage of Notch by γ-secretase is implicated in numerous diseases, but how cleavage is regulated in space and time is unclear. Here, we report that cadherin-based adherens junctions (cadAJs) are sites of high cell-surface γ-secretase activity, as well as sites of constrained physical space that excludes γ-secretase substrates having large extracellular domains (ECDs) like Notch. ECD shedding initiates drastic spatial relocalization of Notch to cadAJs, allowing enzyme-substrate interactions and downstream signaling. Spatial mutations by adjusting the ECD size or the physical constraint alter signaling. Dysregulation of this spatial switch promotes precocious differentiation of ventricular zone neural progenitor cells in vivo. We show the generality of this spatial switch for amyloid precursor protein proteolysis. Thus, cadAJs create spatially distinct biochemical compartments regulating cleavage events involving γ-secretase and preventing aberrant activation of receptors.

The ability to sense and manipulate the state of biological systems has been extensively advanced during the last decade with the help of recent developments in physical tools. Unlike standard genetic and pharmacological perturbation techniques – knockdown, overexpression, small molecule inhibition – that provide a basic on/off switching capability, these physical tools provide the capacity to control the spatial, temporal, and mechanical properties of the biological targets. Among the various physical cues, magnetism offers distinct advantages over light or electricity. Magnetic fields freely penetrate biological tissues and are already used for clinical applications. As one of the unique features, magnetic fields can be transformed into mechanical stimuli which can serve as a cue in regulating biological processes. However, their biological applications have been limited due to a lack of high-performance magnetism-to-mechanical force transducers with advanced spatiotemporal capabilities. In this account, we present recent developments in magnetic nano-tweezers (MNTs) as a high-performance tool for interrogating the spatiotemporal control of cells in living tissue. MNTs are comprised of force-generating magnetic nanoparticles and field generators. Through proper design and the integration of individual components, MNTs deliver controlled mechanical stimulation to targeted biomolecules at any desired space and time. We first discuss about MNT configuration with different force-stimulation modes. By modulating geometry of the magnetic field generator, MNTs exert pulling, dipole-dipole attraction, and rotational forces to the target specifically and quantitatively. We discuss the key physical parameters determining force magnitude, which include magnetic field strength, magnetic field gradient, magnetic moment of the magnetic particle, as well as distance between the field generator and the particle. MNTs also can be used over a wide range of biological time scales — By simply adjusting the amplitude and phase of the applied current, MNTs based on electromagnets allow for dynamic control of the magnetic field from microseconds to hours. Chemical design and the nanoscale effects of magnetic particles are also essential for optimizing MNT performance. We discuss key strategies to develop magnetic nanoparticles with improved force-generation capabilities with a particular focus on the effects of size, shape, and composition of the nanoparticles. We then introduce various strategies and design considerations for target-specific biomechanical stimulations with MNTs. One-to-one particle-receptor engagement for delivering a defined force to the targeted receptor and the small size of the nanoparticles are important. Finally, we demonstrate the utility of MNTs for manipulating biological functions and activities with various spatial (single molecule/cell to organisms) and temporal resolution (microseconds to days). MNTs have the potential to be utilized in many exciting applications across diverse biological systems spanning from fundamental biology investigations of spatial and mechanical signaling dynamics at the single-cell and systems levels to in vivo therapeutic applications.

Pathogen activated antibody-secreting cells (ASCs) produce and secrete antigen-specific antibodies. ASCs are detectable in the peripheral blood as early as 3 days after antigen exposure, which makes ASCs a potential biomarker for early disease detection. Here we present a Magnetic Capture and Detection (MCD) assay for sensitive, on-site detection of ASCs. In this approach, ASCs are enriched through magnetic capture, and secreted antibodies are magnetically detected by a miniaturized nuclear magnetic resonance (μNMR) system. This approach is based entirely on magnetics which supports high contrast against biological background, and simplifies assay procedures. We advanced the MCD system by i) synthesizing magnetic nanoparticles (MNPs) with high magnetic moments for both cell capture and antibody detection, ii) developing a miniaturized magnetic device for high-yield cell capture, and iii) optimizing the μNMR assay for antibody detection. Antibody responses targeting hemolysin E (HlyE) can accurately identify individuals with acute enteric fever. As a proof-of-concept, we applied MCD to detect antibodies produced by HlyE-specific hybridoma cells. The MCD achieved high sensitivity in detecting antibodies secreted from as few as 5 hybridoma cells (50 cells/mL). Importantly, the assay could be performed with whole blood with minimal sample processing.

Dark ground state exciton in semiconductor nanocrystals has been a subject of much interest due to its long lifetime attractive for applications requiring long-lived electronic or spin states. Significant effort has been made recently to explore and access the dark exciton level in metal halide perovskite nanocrystals, which are emerging as a superior source of photons and charges compared to other existing semiconductor nanocrystals. However, the direct observation of long-lived photoluminescence from dark exciton has remained elusive in metal halide perovskite nanocrystals. Here, we report the observation of the intense emission from dark ground state exciton with 1-10 us lifetime in strongly quantum confined CsPbBr3 nanocrystals, which contrasts the behavior of weakly confined system explored so far. The study in CsPbBr3 nanocrystals with varying degree of confinement has revealed the crucial role of quantum confinement in enhancing the bright-dark exciton level splitting which is important for accessing the dark exciton. Our work demonstrates the future potential of strongly quantum-confined perovskite nanocrystals as a new platform to utilize dark excitons.

Phosphorene, a monolayer of black phosphorus (BP), is an elemental two-dimensional material with interesting physical properties, such as high charge carrier mobility and exotic anisotropic in-plane properties. To fundamentally understand these various physical properties, it is critically important to conduct an atomic-scale structural investigation of phosphorene, particularly regarding various defects and preferred edge configurations. However, it has been challenging to investigate mono- and few-layer phosphorene because of technical difficulties arising in the preparation of a high-quality sample and damages induced during the characterization process. Here, we successfully fabricate high-quality monolayer phosphorene using a controlled thinning process with transmission electron microscopy, and subsequently perform atomic-resolution imaging. Graphene protection suppresses the e-beam-induced damage to multi-layer BP and one-side graphene protection facilitates the layer-by-layer thinning of the samples, rendering high-quality monolayer and bilayer regions. We also observe the formation of atomic-scale crystalline edges predominantly aligned along the zigzag and (101) terminations, which is originated from edge kinetics under e-beam-induced sputtering process. Our study demonstrates a new method to image and precisely manipulate the thickness and edge configurations of air-sensitive two-dimensional materials., 21 pages, 5 figures

Recent suggestions of nanoscale heat confinement on the surface of synthetic and biogenic magnetic nanoparticles during heating by radio frequency-alternating magnetic fields have generated intense interest because of the potential utility of this phenomenon for noninvasive control of biomolecular and cellular function. However, such confinement would represent a significant departure from the classical heat transfer theory. Here, we report an experimental investigation of nanoscale heat confinement on the surface of several types of iron oxide nanoparticles commonly used in biological research, using an all-optical method devoid of the potential artifacts present in previous studies. By simultaneously measuring the fluorescence of distinct thermochromic dyes attached to the particle surface or dissolved in the surrounding fluid during radio frequency magnetic stimulation, we found no measurable difference between the nanoparticle surface temperature and that of the surrounding fluid for three distinct nanoparticle types. Furthermore, the metalloprotein ferritin produced no temperature increase on the protein surface nor in the surrounding fluid. Experiments mimicking the designs of previous studies revealed potential sources of the artifacts. These findings inform the use of magnetic nanoparticle hyperthermia in engineered cellular and molecular systems.

Bulk magnetite (Fe3O4), the loadstone used in magnetic compasses, has been known to exhibit magnetoelectric (ME) properties below ~10 K; however, corresponding ME effects in Fe3O4 nanoparticles have been enigmatic. We investigate quantitatively the ME coupling of spherical Fe3O4 nanoparticles with uniform diameters (d) from 3 to 15 nm embedded in an insulating host, using a sensitive ME susceptometer. The intrinsic ME susceptibility (MES) of the Fe3O4 nanoparticles is measured, exhibiting a maximum value of ~0.6 ps/m at 5 K for d=15 nm. We found that the MES is reduced with reduced d but remains finite until d=~5 nm, which is close to the critical thickness for observing the Verwey transition. Moreover, with reduced diameter, the critical temperature below which the MES becomes conspicuous increased systematically from 9.8 K in the bulk to 19.7 K in the nanoparticles with d=7 nm, reflecting the core-shell effect on the ME properties. These results point to a new pathway for investigating ME effect in various nanomaterials., 19 pages, 4 figures

Spatiotemporal interrogation of signal transduction at the single-cell level is necessary to answer a host of important biological questions. This protocol describes a nanotechnology-based single-cell and single-molecule perturbation tool, termed mechanogenetics, that enables precise spatial and mechanical control over genetically encoded cell-surface receptors in live cells. The key components of this tool are a magnetoplasmonic nanoparticle (MPN) actuator that delivers defined spatial and mechanical cues to receptors through target-specific one-to-one engagement and a micromagnetic tweezers (μMT) that remotely controls the magnitude of force exerted on a single MPN. In our approach, a SNAP-tagged cell-surface receptor of interest is conjugated with a single-stranded DNA oligonucleotide, which hybridizes to its complementary oligonucleotide on the MPN. This protocol consists of four major stages: (i) chemical synthesis of MPNs, (ii) conjugation with DNA and purification of monovalent MPNs, (iii) modular targeting of MPNs to cell-surface receptors, and (iv) control of spatial and mechanical properties of targeted mechanosensitive receptors in live cells by adjusting the μMT-to-MPN distance. Using benzylguanine (BG)-functionalized MPNs and model cell lines expressing either SNAP-tagged Notch or vascular endothelial cadherin (VE-cadherin), we provide stepwise instructions for mechanogenetic control of receptor clustering and for mechanical receptor activation. The ability of this method to differentially control spatial and mechanical inputs to targeted receptors makes it particularly useful for interrogating the differential contributions of each individual cue to cell signaling. The entire procedure takes up to 1 week.

Tools capable of imaging and perturbing mechanical signaling pathways with fine spatiotemporal resolution have been elusive, despite their importance in diverse cellular processes. The challenge in developing a mechanogenetic toolkit (i.e., selective and quantitative activation of genetically encoded mechanoreceptors) stems from the fact that many mechanically activated processes are localized in space and time yet additionally require mechanical loading to become activated. To address this challenge, we synthesized magnetoplasmonic nanoparticles that can image, localize, and mechanically load targeted proteins with high spatiotemporal resolution. We demonstrate their utility by investigating the cell-surface activation of two mechanoreceptors: Notch and E-cadherin. By measuring cellular responses to a spectrum of spatial, chemical, temporal, and mechanical inputs at the single-molecule and single-cell levels, we reveal how spatial segregation and mechanical force cooperate to direct receptor activation dynamics. This generalizable technique can be used to control and understand diverse mechanosensitive processes in cell signaling. VIDEO ABSTRACT.

The multicatalytic ubiquitin-proteasome system (UPS) carries out proteolysis in a highly orchestrated way and regulates a large number of cellular processes. Deregulation of the UPS in many disorders has been documented. In some cases, such as carcinogenesis, elevated proteasome activity has been implicated in disease development, while the etiology of other diseases, such as neurodegeneration, includes decreased UPS activity. Therefore, agents that alter proteasome activity could suppress as well as enhance a multitude of diseases. Metal oxide nanoparticles, often developed as diagnostic tools, have not previously been tested as modulators of proteasome activity. Here, several types of metal oxide nanoparticles were found to adsorb to the proteasome and show variable preferential binding for particular proteasome subunits with several peptide binding "hotspots" possible. These interactions depend on the size, charge, and concentration of the nanoparticles and affect proteasome activity in a time-dependent manner. Should metal oxide nanoparticles increase proteasome activity in cells, as they do in vitro, unintended effects related to changes in proteasome function can be expected.

Various bio-medical applications of magnetic nanoparticles have been explored during the past few decades. As tools that hold great potential for advancing biological sciences, magnetic nanoparticles have been used as platform materials for enhanced magnetic resonance imaging (MRI) agents, biological separation and magnetic drug delivery systems, and magnetic hyperthermia treatment. Furthermore, approaches that integrate various imaging and bioactive moieties have been used in the design of multi-modality systems, which possess synergistically enhanced properties such as better imaging resolution and sensitivity, molecular recognition capabilities, stimulus responsive drug delivery with on-demand control, and spatio-temporally controlled cell signal activation. Below, recent studies that focus on the design and synthesis of multi-mode magnetic nanoparticles will be briefly reviewed and their potential applications in the imaging and therapy areas will be also discussed.

The intrinsic nature of small-molecule chemotherapeutics, including i) limited aqueous solubility, ii) systemic toxicity due to non-specific whole-body distribution, and iii) potential development of drug resistance after initial administration, compromises their treatment efficacy.[1] Recently, nanoparticle (NP)-based drug delivery systems have been considered as promising alternatives to overcome some of these limitations and begin to resolve obstacles in the disease management in clinical oncology.[2] The intraparticular space of a NP vector can be employed to package drug payloads without constrain associated with their solubility. Further, NP vectors exhibit enhanced permeability and retention (EPR) effects[3] that facilitate the differential uptake, leading to preferential spatio-distribution in tumor.[4] However, conventional NP drug delivery systems tend to passively release drug payloads, limiting the ability to release an effective drug concentration at a desired time window. Therefore, there is a need to develop next-generation NP drug delivery system such as a stimuli-responsive drug release system with a goal of achieving spatio-temporal control, by which an acute level of drug concentration can be delivered at the time point the NP vectors reach maximum tumor accumulation.[5] By doing so, it is expected to dramatically improve therapeutic effects in tumor and effectively reduce systematic toxicity at a minute drug dosage.[6]

© 2017 The Royal Society of Chemistry. Magnetic nanoparticles (MNPs) are widely used in biomedical and clinical applications, including medical imaging, therapeutics, and biological sample processing. Rapid characterization of MNPs, notably their magnetic moments, should facilitate optimization of particle synthesis and accelerate assay development. Here, we report a compact and low-cost magnetometer for fast, on-site MNP characterization. Termed integrated microHall magnetometer (iHM), our device was fabricated using standard semiconductor processes: an array of Hall sensors, transistor switches, and amplifiers were integrated into a single chip, thus improving the detection sensitivity and facilitating chip operation. By applying the iHM, we demonstrate versatile magnetic assays. We measured the magnetic susceptibility and moments of MNPs using small sample amounts (∼10 pL), identified different MNP compositions in mixtures, and detected MNP-labeled single cells.

Auditory and vestibular hair cell bundles exhibit active mechanical oscillations at natural frequencies that are typically lower than the detection range of the corresponding end organs. We explore how these noisy nonlinear oscillators mode-lock to frequencies higher than their internal clocks. A nanomagnetic technique is used to stimulate the bundles without an imposed mechanical load. The evoked response shows regimes of high-order mode-locking. Exploring a broad range of stimulus frequencies and intensities, we observe regions of high-order synchronization, analogous to Arnold Tongues in dynamical systems literature. Significant areas of overlap occur between synchronization regimes, with the bundle intermittently flickering between different winding numbers. We demonstrate how an ensemble of these noisy spontaneous oscillators could be entrained to efficiently detect signals significantly above the characteristic frequencies of the individual cells.

Temperature control is an important method of self-defense in biological systems. For example, one response mounted by humans in an effort to fight injury, including viral and bacterial infections, involves an increase in body temperature, thus producing the well-recognized symptoms of fever.[1] Today, the idea of using artificial temperature control for disease removal is being realized with the aid of various techniques, such as ultrasound, near-infrared light, and magnetic field by increasing localized temperature in a targeted region.[2] Magnetic nanoparticles have attracted considerable attention for hyperthermia applications owing to their ability to generate heat effectively when exposed to an alternating magnetic field without a penetration depth limit.[3] Hyperthermia, the artificially induced heat treatment of a disease, uses temperatures ranging between 42 °C and 47°C. Generally, a temperature below 45 °C induces apoptotic cell death.[4] As compared to necrosis, apoptosis is a more benign form of “programmed” cell death.[5] Nonliving cells produced as the result of apoptotic process are cleaned by phagocytosis without affecting neighboring normal cells. In contrast, necrosis, typically generated by harsh and high-temperature hyperthermia, is considered relatively harmful because it can be correlated with inflammatory disease and metastasis.[6] However, achieving effective apoptotic hyperthermia is often difficult, as cells typically acquire resistance to induced thermal stress.[7] Repeated exposures to high temperatures with high concentration of magnetic nanoparticles are usually necessary to achieve a useful level of therapeutic efficacy even though the conditions could favor necrotic cell death rather than apoptosis. Because cancer cells are susceptible to heat at about 43 °C, while most normal tissues remain undamaged,[8] hyperthermia using this temperature defines a recognized but unmet goal.

Two-dimensional crystals, single sheets of layered materials, often show distinct properties desired for optoelectronic applications, such as larger and direct band gaps, valley- and spinorbit effects. Being atomically thin, the low amount of material is a bottleneck in photophysical and photochemical applications. Here, we propose the formation of stacks of two-dimensional crystals intercalated with small surfactant molecules. We show, using first principles calculations, that already the very short surfactant methyl amine electronically decouples the layers. We demonstrate the indirect-direct band gap transition characteristic for Group 6 transition metal dichalcogenides experimentally by observing the emergence of a strong photoluminescence signal for ethoxide-intercalated WSe2 and MoSe2 multilayered nanoparticles with lateral size of about 10 nm and beyond. The proposed hybrid materials offer the highest possible density of the two-dimensional crystals with electronic properties typical for monolayers. Variation of the surfactant's chemical potential allows fine-tuning of electronic properties and potentially elimination of trap states caused by defects.

Recently a memristor ( Chua, L. O. IEEE Trans. Circuit Theory 1971 , 18 , 507 ), the fourth fundamental passive circuit element, has been demonstrated as thin film device operations ( Strukov, D. B.; Snider, G. S.; Stewart, D. R.; Williams, R. S. Nature (London) 2008 , 453 , 80 ; Yang, J. J.; Pickett. M. D.; Li, X.; Ohlberg, D. A. A.; Stewart, D. R.; Williams, R. S. Nat. Nanotechnol. 2008 , 3 , 429 ). A new addition to the memristor family can be nanoparticle assemblies consisting of an infinite number of monodispersed, crystalline magnetite (Fe(3)O(4)) particles. Assembly of nanoparticles that have sizes below 10 nm, exhibits at room temperature a voltage-current hysteresis with an abrupt and large bipolar resistance switching (R(OFF)/R(ON) approximately 20). Interestingly, observed behavior could be interpreted by adopting an extended memristor model that combines both a time-dependent resistance and a time-dependent capacitance. We also observed that such behavior is not restricted to magnetites; it is a general property of nanoparticle assemblies as it was consistently observed in different types of spinel structured nanoparticles with different sizes and compositions. Further investigation into this new nanoassembly system will be of importance to the realization of the next generation nanodevices with potential advantages of simpler and inexpensive device fabrications.

The structure of nano-crystalline MnFe2O4 was determined and refined with electron powder diffraction data employing the Rietveld refinement technique. A nano-crystalline sample (with average crystal size of about 10.9 nm) was characterized by selected area electron diffraction in an energy-filtering transmission electron microscope operated at 120 kV. All reflection intensities were extracted from a digitized image plate using the program ELD and then used in the course of structure refinements employing the program FULLPROF for the Rietveld analysis. The final structure was refined in space group Fd-3m (# 227) with lattice parameters a=8.3413(7) A. The reliability factors of the refinement are RF=7.98% and RB=3.55%. Comparison of crystallographic data between electron powder diffraction data and reference data resulted in better agreement with ICSD-56121 rather than with ICSD-28517 which assumes an initial structure model.

Successful development of ultra-sensitive molecular imaging nanoprobes for the detection of targeted biological objects is a challenging task. Although magnetic nanoprobes have the potential to perform such a role, the results from probes that are currently available have been far from optimal. Here we used artificial engineering approaches to develop innovative magnetic nanoprobes, through a process that involved the systematic evaluation of the magnetic spin, size and type of spinel metal ferrites. These magnetism-engineered iron oxide (MEIO) nanoprobes, when conjugated with antibodies, showed enhanced magnetic resonance imaging (MRI) sensitivity for the detection of cancer markers compared with probes currently available. Also, we successfully visualized small tumors implanted in a mouse. Such high-performance, nanotechnology-based molecular probes could enhance the ability to visualize other biological events critical to diagnostics and therapeutics.

The systematic assembly of nanoscale constituents into highly ordered superlattices is of significant interest because of the potential of their multifunctionalities and the discovery of new collective properties. However, successful observations of such superlattice-associated nanoscale phenomena are still elusive. Here, we present magnetic superlattices of Co and Fe 3 O 4 nanoparticles with multidimensional symmetry of either AB (NaCl) or AB 2 (AlB 2 ). The discovery of significant enhancement (≈25 times) of ferrimagnetism is further revealed by forming previously undescribed superlattices of magnetically soft–hard Fe 3 O 4 @CoFe 2 O 4 through the confined geometrical effect of thermally driven intrasuperlattice phase transition between the nanoparticulate components.

Since inorganic nanocrystals exhibit unique shape-dependent nanoscale properties and can be utilized as basic building blocks for futuristic nanodevices, a systematic study on the shape control of these nanocrystals remains an important subject in materials and physical chemistry. In this feature article, we overview the recent progress on the synthetic development of symmetry-controlled colloidal nanocrystals of semiconductor and metal oxide, which are prepared through nonhydrolytic chemical routes. We describe their shape-guiding processes and illustrate the detailed key factors controlling their growth by examining various case studies of zero-dimensional spheres and cubes, one-dimensional rods, and quasi multidimensional structures such as disks, multipods, and stars. Specifically, the crystalline phase of nucleating seeds, surface energy, kinetic vs thermodynamic growth, and selective adhesion processes of capping ligands are found to be most crucial for the determination of the nanocrystal shape.

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.