Search

Solar-blind deep ultraviolet (DUV) photodetectors with high responsivity (R) and fast response speed are crucial for practical applications in astrophysical analysis, environmental pollution monitoring, and communication. Recently, 2D tellurium has emerged as a potential optoelectronic material because of its excellent photoelectric properties. In this study, solar-blind DUV photodetectors are demonstrated based on solution-synthesized and air-stable quasi-2D Te nanosheets (Te NSs). An R of 6.5 × 104 A/W at 261 nm and an external quantum efficiency (EQE) of higher than 2.26 × 106% were obtained, which are highest among most other 2D material-based solar-blind DUV photodetectors. Moreover, the photoelectric performance of the quasi-2D Te-based photodetector exhibited good stability even after ambient exposure for 90 days without any encapsulation. These results indicate that quasi-2D Te NSs provide a viable approach for developing solar-blind DUV photodetectors with ultrahigh R and EQE.

The use of a wide range of methods for incorporating nitrogen atoms on robust catalysts has given rise to fundamental advances in the field of energy conversion and storage. Recently, nitrogen incorporation has proven to be able to fine-tune the electron densities of exposed active sites to create high-performance electrocatalysts. The preservation of a strong interface between the local atomic coordination of nitrogen atoms on bare carbon, single metal atoms, transition metal oxides, metal chalcogenides, and MXenes during synthesis plays an important role in producing an efficient electrocatalysts. In addition, the ability of nitrogen atoms to bind with carbon or metal atoms can be influenced by processing conditions. In this regard, this review is the first comprehensive overview of the range of synthetic strategies to form nitrogen incorporated catalysts and assess their chemical, structural, physical electronic property modification and their influence on electrocatalytic ORR, OER, and HER performance. This review will describe how specific strategies have been utilized to realise effective electrocatalytic systems, including the energy conversion of nitrogen incorporated catalysts, structural coordination, and material optimization. Finally, the main challenges to be considered in future investigations in order to initiate new research efforts in this promising research area are discussed.

Two-dimensional (2D) indium selenide (InSe) has been widely studied for application in transistors and photodetectors, which benefit from its excellent optoelectronic properties. Among the three specific polytypes (γ-, ϵ- and β-phase) of InSe, only the crystal lattice of InSe in β-phase (β-InSe) belongs to a non-symmetry point group of $D_{6h}^4$, which indicates stronger anisotropic transport behavior and potential in the polarized photodetection of β-InSe-based optoelectronic devices. Therefore, we prepare the stable p-type 2D-layered β-InSe via temperature gradient method. The anisotropic Raman, transport and photoresponse properties of β-InSe have been experimentally and theoretically proven, showing that the β-InSe-based device has a ratio of 3.76 for the maximum to minimum dark current at two orthogonal orientations and a high photocurrent anisotropic ratio of 0.70 at 1 V bias voltage, respectively. The appealing anisotropic properties demonstrated in this work clearly identify β-InSe as a competitive candidate for filter-free polarization-sensitive photodetectors.

Nanoengineered Heterostructures In article number 2100503, Zhinan Guo, Han Zhang, Paras N. Prasad, and co‐workers report a nanoengineered heterostructure for the first time demonstration of an nanointerface using an inserted graphene layer between black phosphorus (BP) and InSe which inhibits interlayer recombination and greatly improved photodetection performances. [Image: see text]

The electrochemical nitrogen reduction reaction (eNRR) provides a sustainable way to generate ammonia (NH3) but its Faradaic efficiency (FE) is relatively low and could be further improved, especially on the highly active molybdenum carbide (Mo2C) electrocatalyst. Our theoretical calculations suggest that unlike substitute doping model, interstitial Fe doping into Mo2C is highly eNRR-selective due to decreasing hydrogen evolution activity and unique surface-hydrogenation mechanism on negatively charged Mo sites around Fe atoms. Inspired by this prediction, we successfully developed a novel interstitial Fe doped Mo2C electrocatalyst by the pyrolysis of Fe-doped Mo/Zn bimetallic imidazolate frameworks (Fe-Mo/Zn BIFs) as a precursor where Fe atoms substitute Zn sites to obtain the spatial confinement effect. When evaluated in eNRR catalysis, Fe/Mo2C catalyst therefore exhibits a much higher FE of 20.1% at −0.45 V vs. RHE (reversible hydrogen electrode), which is almost double that of pristine Mo2C and substitute type. Moreover, the Fe/Mo2C catalyst also exhibits high ammonia yield rate with excellent durability over the six continuous cycles.

Great success in 2D van der Waals (vdW) heterostructures based photodetectors is obtained owing to the unique electronic and optoelectronic properties of 2D materials. Performance of photodetectors based 2D vdW heterojunctions at atomic scale is more sensitive to the nanointerface of the heterojunction than conventional bulk heterojunction. Here, a nanoengineered heterostructure for the first‐time demonstration of a nanointerface using an inserted graphene layer between black phosphorus (BP) and InSe which inhibits interlayer recombination and greatly improves photodetection performances is presented. In addition, a transition of the transport characteristics of the device is induced by graphene, from diffusion motion of minority carriers to drift motion of majority carriers. These two reasons together with an internal photoemission effect make the BP/G/InSe‐based photodetector have ultrahigh specific detectivity at room temperature. The results demonstrate that high‐performance vdW heterostructure photodetectors can be achieved through simple structural manipulation of the heterojunction interface on nanoscale., A nanoscale interface engineering in which few‐layer graphene (G) is inserted into the interlayer of black phosphorus (BP)/InSe, forming a 2D BP/G/InSe van der Waals heterojunction, is introduced. Effective electron transfer from BP to InSe is facilitated by the insertion of G, which induces a better photoresponse performance of the BP/G/InSe device.

Low-symmetry layered materials such as black phosphorus (BP) have been revived recently due to their high intrinsic mobility and in-plane anisotropic properties, which can be used in anisotropic electronic and optoelectronic devices. Since the anisotropic properties have a close relationship with their anisotropic structural characters, especially for materials with low-symmetry, exploring new low-symmetry layered materials and investigating their anisotropic properties have inspired numerous research efforts. In this paper, we review the recent experimental progresses on low-symmetry layered materials and their corresponding anisotropic electrical transport, magneto-transport, optoelectronic, thermoelectric, ferroelectric, and piezoelectric properties. The boom of new low-symmetry layered materials with high anisotropy could open up considerable possibilities for next-generation anisotropic multifunctional electronic devices.

The growth and wetting of water on two-dimensional(2D) materials are important to understand the development of 2D material based electronic, optoelectronic, and nanomechanical devices. Here, we visualize the liquefaction processes of water on the surface of graphene, MoS2 and black phosphorus (BP) via optical microscopy. We show that the shape of the water droplets forming on the surface of BP, which is anisotropic, is elliptical. In contrast, droplets are rounded when they form on the surface of graphene or MoS2, which do not possess orthometric anisotropy. Molecular simulations show that the anisotropic liquefaction process of water on the surface of BP is attributed to the different binding energies of H2O molecules on BP along the armchair and zigzag directions. The results not only reveal the anisotropic nature of water liquefaction on the BP surface but also provide a way for fast and nondestructive determination of the crystalline orientation of BP., Structural anisotropy of surfaces determines properties relevant for applications. Here the authors observe a relationship between the shape of water droplets forming on graphene, MoS2and black phosphorous and the surface structure, proposing a method to determine lattice orientation by optical microscopy.

Density functional theory calculations of the layer (L)-dependent electronic band structure, work function and optical properties of &beta, InSe have been reported. Owing to the quantum size effects (QSEs) in &beta, InSe, the band structures exhibit direct-to-indirect transitions from bulk &beta, InSe to few-layer &beta, InSe. The work functions decrease monotonically from 5.22 eV (1 L) to 5.0 eV (6 L) and then remain constant at 4.99 eV for 7 L and 8 L and drop down to 4.77 eV (bulk &beta, InSe). For optical properties, the imaginary part of the dielectric function has a strong dependence on the thickness variation. Layer control in two-dimensional layered materials provides an effective strategy to modulate the layer-dependent properties which have potential applications in the next-generation high performance electronic and optoelectronic devices.

Transition metal dichalcogenides (TMDCs), such as MoS2 and WS2, have attracted much attention in biosensing and bioimaging due to its excellent stability, biocompatibility, high specific surface area, and wide varieties. In this review, we overviewed the application of TMDCs in biosensing and bioimaging. Firstly, the synthesis methods and surface functionalization methods of TMDCs were summarized. Secondly, according to the working mechanism, we classified and gave a detailed account of the latest research progress of TMDC-based biosensing for the detection of the enzyme, DNA, and other biological molecules. Then, we outlined the recent progress of applying TMDCs in bio-imaging, including fluorescence, X-ray computed tomographic, magnetic response imaging, photographic and multimodal imaging, respectively. Finally, we discussed the future challenges and development direction of the application of TMDCs in medical diagnosis. Also, we put forward our view on the opportunity of TMDCs in the big data of modern medical diagnosis.

Owing to its thickness-modulated direct energy band gap, relatively strong light–matter interaction, and unique nonlinear optical response at a long wavelength, few-layer black phosphorus, or phosphorene, becomes very attractive in ultrafast photonics applications. Herein, we synthesized a graphene/phosphorene nano-heterojunction using a liquid phase-stripping method. Tiny lattice distortions in graphene and phosphorene suggest the formation of a nano-heterojunction between graphene and phosphorene nanosheets. In addition, we systematically investigate their nonlinear optical responses at different wavelength regimes. Our experiments indicate that the combined advantages of ultrafast relaxation, broadband response in graphene, and the strong light–matter interaction in phosphorene can be combined together by nano-heterojunction. We have further fabricated two-dimensional (2D) nano-heterojunction based optical saturable absorbers and integrated them into an erbium-doped fiber laser to demonstrate the generation of a stable ultrashort pulse down to 148 fs. Our results indicate that a graphene/phosphorene nano-heterojunction can operate as a promising saturable absorber for ultrafast laser systems with ultrahigh pulse energy and ultranarrow pulse duration. We believe this work opens up a new approach to designing 2D heterointerfaces for applications in ultrafast photonics and other research. The fabrication of a 2D nano-heterojunction assembled from stacking different 2D materials, via this facile and scalable growth approach, paves the way for the formation and tuning of new 2D materials with desirable photonic properties and applications.