Search

Wastewater treatment plants (WWTPs) are designed to eliminate pollutants and alleviate environmental pollution resulting from human activities. However, the construction and operation of WWTPs consume resources, emit greenhouse gases (GHGs) and produce residual sludge, thus require further optimization. WWTPs are complex to control and optimize because of high non-linearity and variation. This study used a novel technique, multi-agent deep reinforcement learning (MADRL), to simultaneously optimize dissolved oxygen (DO) and chemical dosage in a WWTP. The reward function was specially designed from life cycle perspective to achieve sustainable optimization. Five scenarios were considered: baseline, three different effluent quality and cost-oriented scenarios. The result shows that optimization based on LCA has lower environmental impacts compared to baseline scenario, as cost, energy consumption and greenhouse gas emissions reduce to 0.890 CNY/m3-ww, 0.530 kWh/m3-ww, 2.491 kg CO2-eq/m3-ww respectively. The cost-oriented control strategy exhibits comparable overall performance to the LCA-driven strategy since it sacrifices environmental benefits but has lower cost as 0.873 CNY/m3-ww. It is worth mentioning that the retrofitting of WWTPs based on resources should be implemented with the consideration of impact transfer. Specifically, LCA-SW scenario decreases 10 kg PO4-eq in eutrophication potential compared to the baseline within 10 days, while significantly increases other indicators. The major contributors of each indicator are identified for future study and improvement. Last, the authors discussed that novel dynamic control strategies required advanced sensors or a large amount of data, so the selection of control strategies should also consider economic and ecological conditions. In a nutshell, there are still limitations of this work and future studies are required.

We present a low-cost clinically viable ventilator design, AmbuBox, using a controllable pneumatic enclosure and standard manual resuscitators that are readily available (AmbuBag), which can be rapidly deployed during pandemic and mass-casualty events with a minimal set of components to manufacture and assemble. The AmbuBox is designed to address the existing challenges presented in the existing low-cost ventilator designs by offering an easy-to-install and simple-to-operate apparatus while maintaining a long lifespan with high-precision flow control. As an outcome, a mass-producible prototype of the AmbuBox has been devised, characterized, and validated in a bench test setup using a lung simulator. This prototype will be further investigated through clinical testing. Given the potentially urgent need for inexpensive and rapidly deployable ventilators globally, the overall design, operational principle, and device characterization of the AmbuBox system have been described in detail with open access online. Moreover, the fabrication and assembly methods have been incorporated to enable short-term producibility by a generic local manufacturing facility. In addition, a full list of all components used in the AmbuBox has been included to reflect its low-cost nature.

Classification is a pivotal function for many computer vision tasks such as object classification, detection, scene segmentation. Multinomial logistic regression with a single final layer of dense connections has become the ubiquitous technique for CNN-based classification. While these classifiers project a mapping between the input and a set of output category classes, they do not typically yield a comprehensive description of the category. In particular, when a CNN based image classifier correctly identifies the image of a Chimpanzee, its output does not clarify that Chimpanzee is a member of Primate, Mammal, Chordate families and a living thing. We propose a multilayer dense connectivity for concurrent prediction of category and its conceptual superclasses in hierarchical order by the same CNN. We experimentally demonstrate that our proposed network can simultaneously predict both the coarse superclasses and finer categories better than several existing algorithms in multiple datasets.

We propose a semi-supervised learning approach for video classification, VideoSSL, using convolutional neural networks (CNN). Like other computer vision tasks, existing supervised video classification methods demand a large amount of labeled data to attain good performance. However, annotation of a large dataset is expensive and time consuming. To minimize the dependence on a large annotated dataset, our proposed semi-supervised method trains from a small number of labeled examples and exploits two regulatory signals from unlabeled data. The first signal is the pseudo-labels of unlabeled examples computed from the confidences of the CNN being trained. The other is the normalized probabilities, as predicted by an image classifier CNN, that captures the information about appearances of the interesting objects in the video. We show that, under the supervision of these guiding signals from unlabeled examples, a video classification CNN can achieve impressive performances utilizing a small fraction of annotated examples on three publicly available datasets: UCF101, HMDB51 and Kinetics.

This paper proposes a novel approach for crowd counting in low to high density scenarios in static images. Current approaches cannot handle huge crowd diversity well and thus perform poorly in extreme cases, where the crowd density in different regions of an image is either too low or too high, leading to crowd underestimation or overestimation. The proposed solution is based on the observation that detecting and handling such extreme cases in a specialized way leads to better crowd estimation. Additionally, existing methods find it hard to differentiate between the actual crowd and the cluttered background regions, resulting in further count overestimation. To address these issues, we propose a simple yet effective modular approach, where an input image is first subdivided into fixed-size patches and then fed to a four-way classification module labeling each image patch as low, medium, high-dense or no-crowd. This module also provides a count for each label, which is then analyzed via a specifically devised novel decision module to decide whether the image belongs to any of the two extreme cases (very low or very high density) or a normal case. Images, specified as high- or low-density extreme or a normal case, pass through dedicated zooming or normal patch-making blocks respectively before routing to the regressor in the form of fixed-size patches for crowd estimate. Extensive experimental evaluations demonstrate that the proposed approach outperforms the state-of-the-art methods on four benchmarks under most of the evaluation criteria.

Wastewater treatment plants are designed to eliminate pollutants and alleviate environmental pollution. However, the construction and operation of WWTPs consume resources, emit greenhouse gases (GHGs) and produce residual sludge, thus require further optimization. WWTPs are complex to control and optimize because of high nonlinearity and variation. This study used a novel technique, multi-agent deep reinforcement learning, to simultaneously optimize dissolved oxygen and chemical dosage in a WWTP. The reward function was specially designed from life cycle perspective to achieve sustainable optimization. Five scenarios were considered: baseline, three different effluent quality and cost-oriented scenarios. The result shows that optimization based on LCA has lower environmental impacts compared to baseline scenario, as cost, energy consumption and greenhouse gas emissions reduce to 0.890 CNY/m3-ww, 0.530 kWh/m3-ww, 2.491 kg CO2-eq/m3-ww respectively. The cost-oriented control strategy exhibits comparable overall performance to the LCA driven strategy since it sacrifices environmental bene ts but has lower cost as 0.873 CNY/m3-ww. It is worth mentioning that the retrofitting of WWTPs based on resources should be implemented with the consideration of impact transfer. Specifically, LCA SW scenario decreases 10 kg PO4-eq in eutrophication potential compared to the baseline within 10 days, while significantly increases other indicators. The major contributors of each indicator are identified for future study and improvement. Last, the author discussed that novel dynamic control strategies required advanced sensors or a large amount of data, so the selection of control strategies should also consider economic and ecological conditions.