Search

With the aggregation of renewable energy in the power system, the uncertainty caused by the renewable energy affects the planning and operation of power systems. Meanwhile, the existing planning models fail to consider renewable energy uncertainty methods, specifically concerning renewable energy confidence and future possible scenarios; thus, a confidence-based scenario cluster method is presented. A novel generator, network, load, and energy storage (GNLS) co-planning model is proposed in the paper. First, a confidence-based scenario cluster is built, which can reflect uncertainties by clustering and analyzing wind, solar, and load. Second, the proposed model focuses on load and energy storage co-planning, and in addition, relevant flexible indices are used to assess the model. Finally, the GNLS co-planning model is built as a bi-level stochastic model on continuous time scales. The model is solved using the Benders decomposition algorithm. The method in this paper is validated using an IEEE RTS 24-bus and a real test system in China to demonstrate the reduction in renewable energy curtailment and optimization of economic factors in power system planning. [ABSTRACT FROM AUTHOR]

Technological innovation is the key to develop wind power and photovoltaic power industries. The feed-in tariff (FIT) policy, as a demand-pull policy, is important to support renewable energy technological innovation. Using the "difference-in-differences" method, this paper investigates the impact of FIT policy of wind power and the impact of the FIT policy designed according to differences in the distribution of resources on wind power technological innovation. The findings show that the FIT policy can drive patenting in wind power technologies during the implementation period, but may play a relatively weak promoting role in technological innovation in the latter term, and the FIT policy designed according to differences in the distribution of resources also stimulates more patent counts. Finally, based on the fixed effect negative binomial regression model, this paper finds that the higher feed-in tariffs can increase the patent counts in photovoltaic power technologies. [ABSTRACT FROM AUTHOR]

How to effectively utilize renewable energy and improve the economic efficiency of microgrid system and its ability to consume renewable energy has become one of the main problems facing China at present. In response to this challenge, this paper establishes a multiobjective capacity optimization model with the minimum levelized cost of energy, the maximum proportion of renewable energy consumption, and the minimum comprehensive system cost. Based on this model, a new improved beluga whale optimization algorithm is proposed to solve the multiobjective optimization problem in the capacity allocation process of wind–solar–storage microgrid system with the goal of ensuring that the microgrid can meet the maximum load demand at different moments throughout the year. In this paper, opposition‐based learning, artificial bee colony, dynamic opposite, and beluga whale optimization are combined to improve the population diversity and convergence accuracy, thereby enhancing the optimization performance of the algorithm. Finally, after finding the optimal Pareto front solution, the Technique for Order Preference by Similarity to an Ideal Solution is used to help decision‐makers select the optimal solution. Using real load data and meteorological data, the results of this paper show that the multiobjective capacity allocation optimization method of grid‐connected scenic storage microgrid system based on the improved beluga whale optimization algorithm can improve the economics of the wind–solar–storage microgrid system and promote the photovoltaic consumption simultaneously, providing a solution for the realization of low‐carbon power and regional economic development. The best‐found levelized cost of energy for the wind–solar–storage microgrid system is 0.192 yuan/kWh. [ABSTRACT FROM AUTHOR]

Wind power generation is a renewable energy source, and its power output is influenced by multiple factors such as wind speed, direction, meteorological conditions, and the characteristics of wind turbines. Therefore, accurately predicting wind power is crucial for the grid operation and maintenance management of wind power plants. This paper proposes a hybrid model to improve the accuracy of wind power prediction. Accurate wind power forecasting is critical for the safe operation of power systems. To improve the accuracy of wind power prediction, this paper proposes a hybrid model incorporating variational modal decomposition (VMD), a Sparrow Search Algorithm (SSA), and a temporal-convolutional-network-based bi-directional gated recurrent unit (TCN-BiGRU). The model first uses VMD to break down the raw power data into several modal components, and then it builds an SSA-TCN-BIGRU model for each component for prediction, and finally, it accumulates all the predicted components to obtain the wind power prediction results. The proposed short-term wind power prediction model was validated using measured data from a wind farm in China. The proposed VMD-SSA-TCN-BiGRU forecasting framework is compared with benchmark models to verify its practicability and reliability. Compared with the TCN-BiGRU, the symmetric mean absolute percentage error, the mean absolute error, and the root mean square error of the VMD-SSA-TCN-BiGRU model reduced by 34.36%, 49.14%, and 55.94%. [ABSTRACT FROM AUTHOR]

Power systems with a high proportion of inverter-based sources like photovoltaics require a substantial short-circuit current ratio to ensure strong voltage support capabilities. However, this also increases the system's short-circuit current capacity and levels, which may potentially affect the safe operation of system equipment and current-carrying conductors. To evaluate the operational risks, this paper proposes a quantitative calculation model for the critical integration proportion of grid-connected inverter-interfaced power sources based on short-circuit current over-limit probability. Firstly, according to the verification criterion about short-circuit current during the selection of the switching equipment and conductors in the power system, the short-circuit current over-limit probability evaluation system with five indices is established. Secondly, considering the impact of the increased grid integration proportion of inverter-based power sources on short-circuit currents, an evaluation process for operational risk probabilities is proposed. Based on this, the critical access proportion for inverter-based power source integration in the power grid can be calculated. Finally, the proposed model is used to assess the operational risk probability for a 220 kV system which includes a high proportion of inverter-based power sources in the Anhui area, China. Through the analysis of cumulative probability distribution curves, the critical grid integration proportion interval for the transition from normal to high proportion stages of inverter-based power sources is determined. [ABSTRACT FROM AUTHOR]

This paper investigates the evolving landscape of blockchain technology in renewable energy. The study, based on a Scopus database search on 21 February 2024, reveals a growing trend in scholarly output, predominantly in engineering, energy, and computer science. The diverse range of source types and global contributions, led by China, reflects the interdisciplinary nature of this field. This comprehensive review delves into 33 research papers, examining the integration of blockchain in renewable energy systems, encompassing decentralized power dispatching, certificate trading, alternative energy selection, and management in applications like intelligent transportation systems and microgrids. The papers employ theoretical concepts such as decentralized power dispatching models and permissioned blockchains, utilizing methodologies involving advanced algorithms, consensus mechanisms, and smart contracts to enhance efficiency, security, and transparency. The findings suggest that blockchain integration can reduce costs, increase renewable source utilization, and optimize energy management. Despite these advantages, challenges including uncertainties, privacy concerns, scalability issues, and energy consumption are identified, alongside legal and regulatory compliance and market acceptance hurdles. Overcoming resistance to change and building trust in blockchain-based systems are crucial for successful adoption, emphasizing the need for collaborative efforts among industry stakeholders, regulators, and technology developers to unlock the full potential of blockchains in renewable energy integration. [ABSTRACT FROM AUTHOR]

With the increasing penetration of renewable energy resources, their variable, intermittent and unpredictable characteristics bring new challenges to the power system. These challenges require micro-meteorological data and techniques to provide more support for the power systems, including planning, dispatching, operation, and so on. This paper aims to provide readers with insights into the effects of micro-meteorology on power systems, as well as the actual improvement brought by micro-meteorology in some power system scenarios. This paper provides a review including the relevant micro-meteorological techniques such as observation, assimilation and numerical techniques, as well as artificial intelligence, presenting a relatively complete overview of the most recent and relevant micro-meteorology-related literature associated with power systems. The impact of micro-meteorology on power systems is analyzed in six different forms of power generation and three typical scenarios of different stages in the power system, as well as integrated energy systems and disaster prevention and reduction. Finally, a case study in China is provided. This case takes wind power prediction as an example in a power system to compare the performance when applying micro-meteorological data or not. The experimental results demonstrated that using the micro-meteorological reanalysis dataset with high spatial--temporal resolution for wind power prediction performed better, verifying the improvement of micro-meteorology to the power system to some extent. [ABSTRACT FROM AUTHOR]

• A simple, large-scale fabrication of cooling paper via pulping and papermaking technology. • The cooling paper is facilely deconstructed and regenerated to architect the secondary cooler. • The cooling paper features a high solar reflectance of 94% and emissivity of 0.95. • The cooling paper shows the sub-ambient temperature drop of 6 ∼ 8.8 °C under directly solar radiation at daytime. Passive radiative cooling materials provide coldness without energy consumption for all-day thermal comfort by reflecting solar irradiation and emitting heat into the 3 K universe. However, the conventional radiative cooling materials involve complex multilayer structures and unsustainable polymers, showing the non-recyclable disadvantage, which induces resource waste and environmental issues. Herein, we reported a low-cost, scalable, and eco-friendly radiative cooling material (namely cooling paper), consisting of the delignified, fibrillated cellulose fibers and nano-sized hydroxyapatite (HA) via the mature pulping and papermaking process. The resulting cooled paper can be recycled, and it can be easily deconstructed to harvest cellulose fibers and HA, individually. The recovered source materials can be reused to prepare secondary products that show comparable performance to the original cooling paper, including a high solar reflectance of ∼94% and an infrared emissivity of ∼0.95 in the atmospheric transparency window. Such cooling paper enables superior cooling performance with the temperature drop of 6 ∼ 8.8 °C under directly solar radiation. Based on the EnergyPlus simulation, our cooling paper shows a average cooling energy saving of ∼29 % in buildings across China. The recyclable cooling paper with high cooling capability and scalability, as well as environmental friendliness, shows promising potential for sustainable energy-efficient buildings. [ABSTRACT FROM AUTHOR]

Background: The processes of transport decarbonisation are complicated. In this paper, we adopt the Activity-Modal Share-Energy Intensity-Carbon Intensity of Fuel (ASIF) approach and propose a conceptual framework on the direct and indirect impact of COVID-19 on transport CO2 emissions. In the Chinese context, changes of carbon emissions associated with passenger and freight transport (including urban, rural, and inter-city transport) across different transport modes are estimated. Scenario analysis is then used to estimate the impact of COVID-19 on total transport carbon emissions up to 2030. Four scenarios, from minimal to significant behavioural changes and global recession associated with COVID-19, are generated. Results: Under the pandemic, the transport system in China was estimated to have produced 28% less CO2 emissions (1044.2 Mt) in 2020, when compared to 2019. Compared with the business-as-usual scenario, the estimated total transport carbon emissions in 2030 would drop by 6%, 15%, and 21% and 23% under the minimal-impact, low-impact, moderate-impact, and severe-impact scenarios, respectively. Conclusions: The results suggest that the processes triggered by COVID-19 alone will not be sufficient to meet the ambitious transport decarbonisation targets. To meet China's pledge under the United Nations Framework on Climate Change, the medium-term effects of COVID-19 must be combined with strong transport decarbonisation measures of modal shift and new energy applications. With these additional measures, it may be possible to advance the transport carbon peak before 2030. Lessons are relevant to other developing countries. [ABSTRACT FROM AUTHOR]

Based on the background of carbon neutrality targets, panel data of 30 Chinese provinces during 2000–2019 were selected in this paper to explore the nonlinear correlation mechanism among transportation, tourism development, renewable and non-renewable energy consumption and economic growth. Firstly, by employing a fixed effects model as the base model, we confirmed the existence of correlations among these variables. And the nonlinear moderating effects were also verified by setting interaction terms in the model. Secondly, we further discussed the characteristics of the nonlinear relationship among the variables by employing a threshold effects model. Our results demonstrated that the effect of transportation on economic growth is positive and significant if and only if renewable energy consumption surpasses a certain threshold. Meanwhile, we also found that the effect of tourism development on economic growth is positive when non-renewable energy consumption is under a certain threshold. Finally, our study indicated that transportation maintains a positive and significant effect on economic growth within any threshold of tourism development, and the positive effect gradually increases as the threshold rises. The findings of this paper suggested that for China, the contribution of transportation and tourism to economic growth can be expanded by further expanding the substitution of renewable energy for non-renewable energy. [ABSTRACT FROM AUTHOR]

China's renewable energy products have an important place in international trade, and the conclusion of the RCEP agreement can create favourable external conditions for China's renewable energy product exports. This paper measures the export potential of China's renewable energy products to other RCEP countries through a trade gravity model. The results show that (1) the GDP of the importing and exporting countries, the energy consumption of the importing countries, and the particulate emissions damage significantly enhance China's renewable energy product exports; (2) among the RCEP countries, China has a greater potential to export renewable energy products to five countries in 2020, which are mainly located in East and Southeast Asia; and (3) from a dynamic perspective, China's renewable energy trade potential is increasing, while in the Oceania region it is weakening, while trade links to Southeast Asian countries are developing in a more mature direction. Based on the above research, this paper puts forward corresponding policy recommendations. [ABSTRACT FROM AUTHOR]

In power systems with high penetration of renewable energy, traditional physical model-based optimal dispatch methods suffer from modeling difficulties and poor adaptability, while data-driven dispatch methods, represented by reinforcement learning, have the advantage of fast decision making and reflecting long-term benefits. However, the performances of data-driven methods are much limited by the problem of distribution shift under insufficient power system scenario samples in the training. To address this issue, this paper proposes an improved scenario division method by integrating the power system's key physical features and the data-driven variational autoencoder (VAE)-generated features. Next, based on the scenario division results, a multi-scenario data-driven dispatch model is established. The effectiveness of the proposed method is verified by a simulation conducted on a real power system model in a province of China. [ABSTRACT FROM AUTHOR]

This paper presents a study of the features, problems, and prospects of implementing knowledge and information systems in the fight against climate change, which are based on the digital management of knowledge and information systems. We demonstrate practices that are applied in Norway and China and determine the key directions for implementing these technologies. We confirm the offered research hypothesis on the effect of such components as finances, infrastructure, and digital readiness of the workforce for the implementation of new ICT. We also establish the prospects for an increase in the effectiveness of the realisation of the consideration process in the conditions of mass implementation of sectorial technologies and the focus on global climate integration in China and Norway. The objective of this research is to identify the directions for tackling climate change in the digital economy that are focused on green management of knowledge and information systems. The methods used in this work include the method of scientific abstraction, comparison, statistical analysis, and factor analysis. The scientific novelty of this research consists in the establishment of the directions for digitalization of environmental growth in the conditions of climate change and the quick emergence of innovative ICT. [ABSTRACT FROM AUTHOR]

With the energy structure transition and the development of the green power market, the role of electricity retailers in multi-market green power trading has become more and more important. Particularly in China, where aggressive green energy policies and rapid market transformations provide a distinct context for such studies, the challenges are pronounced. Under demand-side response, electricity retailers face the uncertainty of users' electricity consumption and incentives, which complicates decision-making processes. The purpose of this paper is to explore the optimization decision-making problem of multi-market green power trading for electricity retailers under demand-side response, with a special focus on the Chinese market due to its leadership in implementing substantial green energy initiatives and its potential to set precedents for global practices. We first construct a two-party benefit optimization model, which comprehensively considers the profit objectives for electricity retailers and utility maximization for users. Then, the model is solved by the Lagrange multiplier method and distributed subgradient algorithm to obtain the optimal solution. Finally, the effectiveness of the incentive optimization strategy under the multi-market to promote green power consumption and improve the profit of electricity retailers is verified by arithmetic simulation. The results of this study show that the incentive optimization strategy under multi-market, particularly within the Chinese context, is expected to provide a reference for electricity retailers to develop more flexible and effective trading strategies in the green power market and to contribute to the process of promoting green power consumption globally. [ABSTRACT FROM AUTHOR]

South Africa possesses extremely rich renewable energy resources, including solar energy and wind energy, in spite of this, South Africa traditionally relies on coal as its primary energy source. Recently, South Africa confronted with severe electricity shortage. With pressure of power shortage and the transition to low- carbon energy, South Africa has been actively promoting the development of renewable energy, aiming to diversify its energy structure. China, as the world's leading country in the development and utilization of renewable energy, has long been committed to helping South Africa achieve renewable energy development. This article reviews the cooperation progress between China and South Africa in renewable energy, and provides an in-depth analysis of the challenges currently faced by both sides. To address such challenges, it is suggested to strengthen the design of top-level cooperation mechanisms, create diverse collaboration platforms, prioritize the exchange and collaboration of scientific talents. This paper aims to provide a typical reference for deepening renewable energy cooperation between China and South Africa. [ABSTRACT FROM AUTHOR]

The economic operation of hydropower stations has the potential to increase water use efficiency. However, there are some challenges, such as the fixed and unchangeable flow characteristic curve of the hydraulic turbines, and the large number of variables in optimal load distribution, which limit the progress of research. In this paper, we propose a new optimal method of the economic operation of hydropower stations based on improved Long Short-Term Memory neural network (I-LSTM) and Random Forest (RF) algorithm. Firstly, in order to accurately estimate the water consumption, the LSTM model's hyperparameters are optimized using improved particle swarm optimization, and the I-LSTM method is proposed to fit the flow characteristic curve of the hydraulic turbines. Secondly, the Random Forest machine learning algorithm is introduced to establish a load-distribution model with its powerful feature extraction and learning ability. To improve the accuracy of the load-distribution model, we use the K-means algorithm to cluster the historical data and optimize the parameters of the Random Forest model. A Hydropower Station in China is selected for a case study. It is shown that (1) the I-LSTM method fits the operating characteristics under various working conditions and actual operating characteristics of hydraulic turbines, ensuring that they are closest to the actual operating state; (2) the I-LSTM method is compared with Support Vector Machine (SVM), Extreme Learning Machine (ELM) and Long Short-Term Memory neural network (LSTM). The prediction results of SVM have a large error, but compared with ELM and LSTM, MSE is reduced by about 46% and 38% respectively. MAE is reduced by about 25% and 21%, respectively. RMSE is reduced by about 27% and 24%, respectively; (3) the RF algorithm performs better than the traditional dynamic programming algorithm in load distribution. With the passage of time and the increase in training samples, the prediction accuracy of the Random Forest model has steadily improved, which helps to achieve optimal operation of the units, reducing their average total water consumption by 1.24%. This study provides strong support for the application of intelligent low-consumption optimization strategies in hydropower fields, which can bring higher economic benefits and resource savings to renewable energy production. [ABSTRACT FROM AUTHOR]

With a significant share of renewable power generation integrated into the power supply, it is crucial to timely adjust the regulating peak load for coal-fired power plants equipped with CO2 capture to ensure the stable operation of the multi-energy supply system. In this paper, the effects of varying boiler loads on the techno-economic performance of the retrofitted power plant were studied. Furthermore, the potential for reducing the cost of CO2 capture was investigated, and early opportunities for demonstration were discussed. Results showed that when the boiler load decreased from 100% turbine heat acceptance condition to 50% turbine heat acceptance condition, the cost of CO2 capture increased from 37.0 $/t CO2 to 57.0 $/t CO2, cost contribution of energy penalty and extra capital investment also increased from 20.6 $/t-CO2 to 25.7 $/t-CO2, and from 16.4 $/t-CO2 to 31.3 $/t-CO2, respectively. Furthermore, by improving separation efficiency from 0.15 to 0.5, a 25% to 30% reduction in CO2 capture cost can be achieved. The cost of CO2 capture could decrease by 42.2–50.5% when the cumulative capacity reaches 250 GW under the high investment learning rate scenario. According to the distribution of coal prices and renewable energy sources in China, the early demonstration projects of multi-energy supply systems should prioritize the northern region. The results of this work can provide informative references for making roadmaps and policies for CO2 emission reduction toward carbon neutrality. [ABSTRACT FROM AUTHOR]

Bearing in mind European Green Deal assumptions regarding a significant reduction of green house emissions, electricity generation from Renewable Energy Sources (RES) is more and more important nowadays. Besides this, accurate and reliable electricity generation forecasts from RES are needed for capacity planning, scheduling, managing inertia and frequency response during contingency events. The recent three years have proved that Machine Learning (ML) models are a promising solution for forecasting electricity generation from RES. In this review, the 8-step methodology was used to find and analyze 262 relevant research articles from the Scopus database. Statistic analysis based on eight criteria (ML method used, renewable energy source involved, affiliation location, hybrid model proposed, short term prediction, author name, number of citations, and journal title) was shown. The results indicate that (1) Extreme Learning Machine and ensemble methods were the most popular methods used for electricity generation forecasting from RES in the last three years (2020–2022), (2) most of the research was carried out for wind systems, (3) the hybrid models accounted for about a third of the analyzed works, (4) most of the articles concerned short-term models, (5) the most researchers came from China, (6) and the journal which published the most papers in the analyzed field was Energies. Moreover, strengths, weaknesses, opportunities, and threats for the analyzed ML forecasting models were identified and presented in this paper. [ABSTRACT FROM AUTHOR]

The development of renewable energy in China has made remarkable achievements, but the problem of renewable energy consumption has become increasingly prominent. This paper establishes a power market trading system for renewable energy, with the aim of promoting large-scale renewable energy consumption and increasing the enthusiasm of renewable energy producers and users to participate in market transactions. First, according to the power generation cost, the backup cost of renewable energy power plants and the possible quotation strategies of other renewable energy producers, a quotation model of renewable energy producers is established. In the clearing of the spot market by renewable energy producers, the independent market operator conducts the first-stage clearing of the electricity market with the goal of maximizing social welfare. After the announcement of the clearing results, the renewable energy producers that did not win the bid will revise their quotations and carry out the second stage clearing to realize the consumption of renewable energy. In this paper, the particle swarm algorithm combined with the CPLEX solver is used to solve the problem, and finally, different scenarios are analyzed through example analysis. The results show that, compared with the conventional power market trading mechanism, the energy abandonment rate of the power market trading mechanism for renewable energy proposed in this paper drops from 8.2% to 2.1%, and the profit margin of renewable energy producers increase by 6.6%. It is demonstrated that the proposed electricity market mechanism can effectively promote the consumption of renewable energy and increase the income of renewable energy producers. [ABSTRACT FROM AUTHOR]

Power systems face adequacy risks because of the high integration of renewable energy. It is urgent to develop efficient methods for power system operational reliability assessment. Conventional power system reliability assessment methods cannot achieve real-time assessment of system risk because of the high computational complexity and long calculation time. The high computational complexity is mainly caused by a large number of optimal power flow (OPF) calculations. To reduce the computational complexity, this paper transfers the optimal power flow model as a multiparameter linear programming model. Then, the optimal power flow can be obtained by linear calculations. Furthermore, this paper proposes a state reduction method considering the importance index of transmission lines for further improving the calculation efficiency. Case studies are carried out on IEEE standard systems and a provincial power grid in China. Compared with the conventional reliability assessment method, the reliability assessment efficiency of the proposed method increases by 10–40 times, and the assessment error is less than 1%. [ABSTRACT FROM AUTHOR]

Energy transition is a major structural change in the whole social system, and the energy system must be changed globally to replace fossil fuels. Hydropower is one of the largest sources of renewable energy in the world. However, owing to the construction of hydropower projects, involuntary resettlers are suffering from being far away from their native land, losing the land cultivated for generations and the houses they live in, and losing the social relationship network based on geography and blood ties. Based on the system evaluation theory of reservoir resettlement and referring to relevant research findings, this paper constructs a comprehensive evaluation index framework for assessing the implementation effect of the Post-Relocation Support (PReS) policy. The research region is located in Zhijin County, Bijie City, Guizhou Province, China. Accordingly, a combined method of a structural equation model and a fuzzy comprehensive evaluation model is used in this paper to analyze the implementation of the PReS policy. The results show that the total score of implementing effects of the PReS policy is 4.4, with dramatic significance. The subindex scores of the resettlers' family income, living conditions, and production conditions; the local economy; and social stability are 4.3, 4.6, 4.4, 4.6, and 4.3, respectively, with dramatic significance. This paper has analyzed and summarized the successful practices of implementing the PReS policy for reservoir resettlers in three dimensions: poverty alleviation, beautiful home construction, and accelerating rural revitalization. Research shows that China's rural reservoir resettlers' PReS policy has been more effective in restoring the livelihoods of reservoir resettlers. [ABSTRACT FROM AUTHOR]

Background: Saudi Arabia (KSA) is a global leader in producing fossil fuels and has primarily relied on this energy source for its Gross Domestic Product (GDP). However, after the 2014 oil crash, the country established Vision 2030, intending to shift toward a non-oil dependent economy. Through this vision, Saudi Arabia aims to increase generation of electricity from clean energy sources by 30%. This paper examines the effectiveness of strict intellectual property (IP) regulations aiming to develop the renewable energy (RE) sector. Methods: In this paper, the author examines the effectiveness of strict intellectual property rights in-depth to develop innovation in the renewable energy sector as mentioned in Saudi Arabia's 2030 Vision. The paper makes a comparison with countries, such as the EU and China, regarding the extent to which strict intellectual rights have improved innovation. The author uses an inductive research approach that relies on qualitative data since it critically analyses regulations and policies in many countries, such as Saudi Arabia, the EU, and China. Results and conclusions: The author finds that financial incentives are more effective than in developing innovation in the renewable energy sector. Most importantly, developing countries benefit from financial incentives to increase innovation since many developed countries have adopted a strict IP law after their markets developed. [ABSTRACT FROM AUTHOR]

With large-scale grid-connected renewable energy, new power systems require more flexible and reliable energy storage power sources. Pumped storage stations play an important role in peak shaving, valley filling, and promoting renewable energy consumption. This paper presents the reasonable energy-abandonment operation of a combined power generation system (CPGS), in which a pumped storage station is the core control power, with an ultra-high proportion of renewable energy. Firstly, based on the seasonal characteristics of wind, solar, and load demand, typical days are selected through improved clustering analysis algorithms. Then, a daily optimal scheduling model for combined power generation systems (CPGS) is developed with the goals of economy, low-carbon, and stable operation. Finally, the correlation between the energy-abandonment rate and pumped storage station peak shaving and system optimization operation indicators is obtained by a reasonable energy-abandonment calculation method considering source-grid-load coordination. Taking the operation data of an energy base in the western region of China as an example, when the penetration rate of renewable energy is 60–70% in the future, the operating cost on the power side is greatly affected by the construction of the source side. When the system operates at a planned reasonable energy-abandonment rate of 2%, electricity regulation, load tracking, and daily operating costs all show better performance. [ABSTRACT FROM AUTHOR]

As the adoption of renewable energy sources grows, ensuring a stable power balance across various time frames has become a central challenge for modern power systems. In line with the "dual carbon" objectives and the seamless integration of renewable energy sources, harnessing the advantages of various energy storage resources and coordinating the operation of long-term and short-term storage have become pivotal directions for future energy storage deployment. To address the complexities arising from the coupling of different time scales in optimizing energy storage capacity, this paper proposes a method for energy storage planning that accounts for power imbalance risks across multiple time scales. Initially, the Seasonal and Trend decomposition using the Loess (STL) decomposition method is utilized to temporally decouple actual operational data. Subsequently, power balance computations are performed based on the obtained data at various time scales to optimize the allocation of different types of energy storage capacities and assess the associated imbalance risks. Finally, the effectiveness of the proposed approach is validated through hourly applications using real-world data from a province in southern China over recent years. [ABSTRACT FROM AUTHOR]

The demand for the power grid system's capacity to undergo peak-shaving is increasing as the proportion of renewable energy rises. In China, nuclear power units usually only provide a base load operation in the view of safety and economic considerations, but they do not provide load adjustment services, which undoubtedly increases the pressure of grid load adjustment. In this paper, a novel flexibility load adjustment strategy of the CHP nuclear unit is studied, which is achieved by introducing the thermal storage tank (TST) into the Rankine cycle without changing the output of the nuclear reactor. The AP1000 pressurized water reactor nuclear power unit for combined heat and power is taken as an example, and the thermodynamic model is established through the water vapor equation. Furthermore, the reference system is simulated for the goal of minimizing the imbalance between power supply and demand, and the flexibility–environment–economy benefits are evaluated. The results show that the heat storage/release of the TST may achieve power output flexible adjustment of the nuclear unit, and the power imbalance of the reference energy system is reduced from 1107.99 MWh to 457.24 MWh, a reduction of 58.73%. The introduction of a 600 MWh TST can enable the reference unit to contribute 335 MWh of peak electricity within the reference day. From the perspective of replacing the power generation output increment of coal-fired power units with equal amounts, it can achieve a reduction of 106.09 tons of coal consumption in the case day, which means that 277.73 tons of CO2 emissions can be reduced. The profit of the reference unit can be improved by CHY 70,125 via participating in load adjustment in the case day if following the time-of-use electricity price. [ABSTRACT FROM AUTHOR]

With the increasing severity of climate change, the power industry, as one of the main sources of carbon emissions, is playing an extremely important role in the process of low-carbon energy transformation. The purpose of this paper is to try to find a general method to solve the optimal path for the low-carbon evolution of the power supply structure so as to meet the challenges faced by the low-carbon transformation of the power industry in the future. This paper first uses the capacity coefficient index (CCI) to represent the power generation ability of different technologies and proposes a forecasting method for the CCI of renewable energy generation. In this paper, a two-layer optimization model considering multiple constraints is established and solved using the MPC method. The results show that China's installed capacity of renewable power could account for more than 50% in 2030, while the carbon emissions will decrease after reaching a peak in 2023. On the premise of ensuring sufficient reserve adjustment capacity of thermal power units, increasing the proportion of renewable energy generation is an important way to realize emission reduction in the power industry. [ABSTRACT FROM AUTHOR]

Severe disturbances in a power network can cause the system frequency to exceed the safe operating range. As the last defensive line for system emergency control, under frequency load shedding (UFLS) is an important method for preventing a wide range of frequency excursions. This paper proposes a hierarchical UFLS scheme of "centralized real-time decision-making and decentralized real-time control" for inter-connected systems. The centralized decision-layer of the scheme takes into account the importance of the load based on the equivalent transformation of kinetic energy (KE) and potential energy (PE) in the transient energy function (TEF), while the load PE is used to determine the load shedding amount (LSA) allocation in different loads after faults in real-time. At the same time, the influence of inertia loss is considered in the calculation of unbalanced power, and the decentralized control center is used to implement the one-stage UFLS process to compensate for the unbalanced power. Simulations are carried out on the modified New England 10-generator 39-bus system and 197-bus system in China to verify the performance of the proposed scheme. The results show that, compared with other LSA allocation indicators, the proposed allocation indicators can achieve better fnadir and td. At the same time, compared with other multi-stage UFLS schemes, the proposed scheme can obtain the maximum fnadir with a smaller LSA in scenarios with high renewable energy sources (RES) penetration. [ABSTRACT FROM AUTHOR]

The large-scale centralized development of wind and PV power resources is the key to China's dual carbon targets and clean energy transition. The vast desert–Gobi–wilderness areas in northern and western China will be the best choice for renewable energy development under multiple considerations of resources endowment, land use constraints, technical conditions, and economic level. It is urgent to carry out a quantitative wind and PV resource assessment study in desert–Gobi–wilderness areas. This paper proposed a multi-dimensional assessment method considering the influence of the power grid and transportation infrastructure distributions, which includes three research levels, namely, the technical installed capacity, the development potential, and the development cost. Nine main desert–Gobi–wilderness areas were assessed. The wind and PV technical installed capacities were 0.6 TW and 10.7 TW, and the total development potentials were over 0.12 TW and 1.2 TW, with the full load hours of 2513 and 1759 and the average development costs of 0.28 CNY/kWh and 0.20 CNY/kWh. Finally, this paper proposed the meteorological–electrical division distribution. A case study in the Kubuqi and Qaidam Deserts was carried out on wind–wind and wind–PV collaborative development across different meteorological–electrical divisions, which can reduce by 58% the long-term energy storage capacity and decrease the total system LCOE from 0.488 CNY/kWh to 0.445 CNY/kWh. [ABSTRACT FROM AUTHOR]

The intermittent access of renewable energy sources leads to a significant increase in fault short‐circuit currents in power grid. DC superconducting fault current limiters (SFCL) can limit short‐circuit currents in flexible DC transmission systems, which work in combination with direct current circuit breaker (DCCBs) to protect the grid system effectively. However, for the parameter design of DC superconducting fault current limiter (DCSFCL), it is difficult to balance the economics of the device and its adaptability to different fault situations. In this paper, a cross‐mapping design methodology for the DCSFCL is proposed and applied in the Nan'ao flexible DC transmission project, China. A cross‐mapping method is designed combining the critical parameters of DCSFCL and the system parameters. A three‐terminal simulation model of the flexible DC transmission system is constructed through MATLAB/Simulink and the design process of DCSFCL parameters is introduced. A cyclic calculation approach is proposed for the design of DCSFCL parameters through three fault conditions of the power system. Meanwhile, impact current short‐circuits test and artificial ground short‐circuit test were conducted on the prototype. Test results show that the designed DCSFCL meets the requirements of practical applications. [ABSTRACT FROM AUTHOR]

Copyright of China Rural Water & Hydropower is the property of China Rural Water & Hydropower Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Developing renewable energy has become a major strategy for China to accelerate the energy transition and combat climate change. Accordingly, a guarantee mechanism for renewable energy consumption with renewable portfolio standards (RPS) has been set in China. However, currently, the top-down allocation of regional renewable energy consumption targets often has issues of unfairness and inefficiency. It is necessary to investigate the issue of how to stimulate the renewable energy consumption potential on the demand side and reasonably formulate the consumption responsibility weights of various market entities. This paper aimed to develop a new methodology for the weight allocation of renewable energy consumption responsibilities. In doing so, an integrated model of an evolutionary game and stochastic optimization was constructed between market entities and governments. Then, the equilibrium strategies of market entities and governments were obtained through the evolutionary game. Furthermore, based on the equilibrium strategies, this paper optimized the renewable energy consumption weight of each market entity, which constitutes the optimal allocation scheme of renewable energy consumption responsibility weights. Finally, using the data of 7069 market entities in Hubei Province in 2021, this study simulated the model to verify its effectiveness and practicability. The results indicate that the willingness of market entities to assume more consumption responsibility is positively correlated with the government's incentives and the maturity of the green electricity trading market. This study provides important implications for optimizing government regulations and promoting renewable energy consumption. [ABSTRACT FROM AUTHOR]

Hydrogen energy has an advantage over conventional fossil energy because of its clean and low-carbon features, while its stability gives it an advantage over renewable energy sources such as hydropower, photovoltaic (PV) power, and wind power. Using hydrogen as a fuel can achieve zero carbon emissions or even net zero emissions at the end of energy conversion. Moreover, with hydrogen as the carrier, an energy system of multi-energy complementarity will be established by coupling multiple energy systems such as power grids, gas grids and heat networks, which can realize the comprehensive utilization of renewable energy sources in an efficient, stable, and flexible manner. Based on the "dual carbon" goals, this paper targets sectors with high carbon emissions represented by electric power, steel and transportation, analyzes the feasible path of using hydrogen energy to promote deep carbon reduction, and points out the obstacles faced by hydrogen energy development in various sectors. On account of the current development and expected prospects, this paper proposes that the current focus of hydrogen energy industry is to coordinate the development of industrial sectors and regions, build a pattern that can facilitate the industry's systematic and concerted development, address key technical challenges (such as green hydrogen production or hydrogen storage and transportation via pipeline), improve industrial standards, and promote the industry's development in a balanced, coordinated and orderly way. [ABSTRACT FROM AUTHOR]

In recent years, the rapid rise of carbon dioxide concentration makes global warming increasingly serious, which leads to sea-level rise, coastal lowland inundation, glacier melting, extreme weather, species extinction and other environmental problems. China, as the largest carbon dioxide emitter, is facing climate change. In 2020, the Chinese government promised at the UN General Assembly to achieve the peak of carbon by 2030, and also put forward the goal of achieving carbon neutrality by 2060. To achieve the carbon peak and carbon in target, China needs to reduce the use of fossil energy and replace the use of fossil energy with renewable energy with less carbon dioxide emissions. Tidal energy, as a low-carbon renewable energy, is an important alternative to fossil energy. But can the tide be developed at the expense of the environment? In this paper, the impact of the development of tidal energy on the environment is analyzed and elaborated. According to the environmental impact, the solutions of developing environment-friendly tidal energy, wave energy and temperature difference energy are given. Based on this, policy suggestions are put forward to the Chinese government. The research results of this paper will provide reference for developing countries to develop and utilize tidal energy for power generation. [ABSTRACT FROM AUTHOR]

A wind–hydrogen coupled power generation system can effectively reduce the power loss caused by wind power curtailment and further improve the ability of the energy system to accommodate renewable energy. However, the feasibility and economy of deploying such a power generation system have not been validated through large-scale practical applications, and the economic comparison between regions and recommendations on construction are still lacking. In order to solve the aforementioned problems, this paper establishes an economic analysis model for the wind–hydrogen coupled power generation system and proposes a linear optimisation-based priority analysis method focusing on the major net present value for regional energy system as well as a cost priority analysis method for hydrogen production within sample power plants. The case study proves the effectiveness of the proposed analysis methods, and the potential to develop wind–hydrogen coupled power generation systems in various provinces is compared based on the national wind power data in recent years. This provides recommendations for the future pilot construction and promotion of wind–hydrogen coupled power generation systems in China. [ABSTRACT FROM AUTHOR]

With the large-scale development and grid connection of renewable energy, hydropower faces more intense and frequent peak shaving and frequency regulation, giving rise to water level fluctuations and frequently forced sluice adjustments at hydropower stations. This paper proposes a model that combines "offline calculation" and "online search". First, feasible sluice opening combinations for different water levels at each hydropower station are calculated offline, and a sluice operation strategy table is constructed. Subsequently, an optimal sluice operation strategy is searched online according to the real-time water level and various regulatory requirements. As an example, we select three hydropower stations in the middle reach of the Dadu River in China, namely, Pubugou, Shenxigou, and Zhentouba. The results show that the total number of adjustments of the sluices of the cascade hydropower stations was reduced from 1195 to 675, a reduction of 43.5%, and the leading hydropower station, Pubugou, met water level control requirements, whereas the fluctuations in the water level of the two downstream daily regulating hydropower stations, Shenxigou and Zhentouba, were reduced by 1.38 m and 0.55 m, respectively. The results indicate that the sluices of hydropower stations were optimally used under high-intensity peak shaving and frequency regulation. [ABSTRACT FROM AUTHOR]

The construction and development of energy storage are crucial areas in the reform of China's power system. However, one of the key issues hindering energy storage investments is the ambiguity of revenue sources and the inaccurate estimation of returns. In order to facilitate investors' understanding of revenue sources and returns on investment of energy storage in the existing electricity market, this study has established multiple relevant revenue quantification models. The research methodology employed in this paper consists of three main components: Firstly, we established a revenue model and a cost model for energy storage participation in the electricity market. These models focus on arbitrage revenue, subsidy revenue, auxiliary services revenue, investment cost, operational and maintenance cost, and auxiliary service cost of energy storage. Subsequently, we utilized an enhanced Grey Wolf Optimizer algorithm to solve the optimization problem and maximize revenue, thus obtaining the optimal capacity and revenue scale of energy storage in the electricity market. Finally, we compared the whole-lifecycle ROI of different energy storage options in various scenarios. The evaluation results demonstrate that the difference between peak and off-peak loads impacts the investment demand and charging/discharging depth of energy storage. In addition, the discrepancy between peak and off-peak prices affects the arbitrage return of energy storage. These two factors can serve as criteria for energy storage investors to assess their return expectations. When solely considering economic returns and disregarding technical factors, pumped storage energy storage emerges as the most suitable mechanical energy storage option requiring investment. The main contribution of this study lies in the estimation of the lifecycle investment returns for various energy storage technologies in the Chinese electricity market, thus providing valuable insights for the investment and operational practices of market participants. [ABSTRACT FROM AUTHOR]

Renewable hydrogen energy has received growing attention due to the energy shortage and increasing CO2 emissions. With these issues in mind, renewable hydrogen has become an important component of future energy systems in many countries, especially in the transportation sector. However, the shortage of hydrogenation station and the risks associated with their construction have become an urgent issue for the development of hydrogen energy transportation. To better implement the hydrogenation station project, a risk management framework is proposed for risk control. First, a comprehensive risk index system is developed, using a weighting method based on the G1 method and the C-OWA operator. Second, a grey fuzzy synthetic assessment method is applied to evaluate the risk based on the 3D risk assessment framework. Finally, risk is assigned to different participants and actionable measures are proposed. This paper summarizes the obstacles to the development of hydrogen energy transportation, highlights the potential of hydrogen energy development, and suggests workable solutions for the use of hydrogen energy in the future transportation industry. [ABSTRACT FROM AUTHOR]

Solar hydrogen production technology is a key technology for building a clean, low-carbon, safe, and efficient energy system. At present, the intermittency and volatility of renewable energy have caused a lot of "wind and light". By combining renewable energy with electrolytic water technology to produce high-purity hydrogen and oxygen, which can be converted into electricity, the utilization rate of renewable energy can be effectively improved, while helping to improve the solar hydrogen production system. This paper summarizes and analyzes the research status and development direction of solar hydrogen production technology from three aspects. Energy supply mode: the role of solar PV systems and PT systems in this technology is analyzed. System control: the key technology and system structure of different types of electrolytic cells are introduced in detail. System economy: the economy and improvement measures of electrolytic cells are analyzed from the perspectives of cost, consumption, efficiency, and durability. Finally, the development prospects of solar hydrogen production systems in China are summarized and anticipated. This article reviews the current research status of photovoltaic-photothermal coupled electrolysis cell systems, fills the current research gap, and provides theoretical reference for the further development of solar hydrogen production systems. [ABSTRACT FROM AUTHOR]

In order to solve the problem of randomness and volatility caused by the rapid growth of renewable energy (RE), energy storage systems (ESSs)—as an important means of regulation—can effectively improve the flexible regulation capacity of power systems utilizing a high proportion of RE. Most of the current ESS capacity configuration procedures are carried out based on the typical scenario method or time series production simulation. This method tends to determine the size of the ESS configuration through multiple trial simulations. Uncertainty of simulation prediction data can result in the existence of an excess capacity or lack of configured capacity. In addition, this method reflects the ESS demand under specific targets, but it fails to fully utilize RE generation characteristics. The configuration process lacks the mathematical mechanism of RE consumption, and the calculation process is too complicated. In view of the shortcomings of traditional ESS optimal configuration methods, this paper examines the mathematical mechanism of RE consumption and proposes the ESS optimal configuration analysis method based on "equal area criterion". First, the principle of RE consumption is analyzed and the "RE consumption characteristic curve" is proposed according to RE characteristics. In addition, a working principle diagram of RE consumption, including ESS, is constructed to visually show the consumption capacity of RE and the working position of ESS. Then, the ESS optimal configuration process, based on the "equal area criterion", is proposed to achieve an accurate match between ESS capacity demand and RE consumption targets. Finally, the power grid of a region in China is taken as an example. We prove that the proposed method can save 1.41 × 103 MWh of ESS capacity and provide a more "mathematical" and "convenient" systematic solution for RE consumption and ESS optimization compared to the production simulation method. [ABSTRACT FROM AUTHOR]

Energy forecasting is crucial in scheduling and planning future electric load, so as to improve the reliability and safeness of the power grid. Despite recent developments of forecasting algorithms in the machine learning community, there is a lack of general and advanced algorithms specifically considering requirements from the power industry perspective. In this paper, we present eForecaster, a unified AI platform including robust, flexible, and explainable machine learning algorithms for diversified energy forecasting applications. Since October 2021, multiple commercial bus load, system load, and renewable energy forecasting systems built upon eForecaster have been deployed in seven provinces of China. The deployed systems consistently reduce the average Mean Absolute Error (MAE) by 39.8% to 77.0%, with reduced manual work and explainable guidance. In particular, eForecaster also integrates multiple interpretation methods to uncover the working mechanism of the predictive models, which significantly improves forecasts adoption and user satisfaction. [ABSTRACT FROM AUTHOR]

Underwater wet-mateable connectors have been widely used to reduce the cost and the time of installation, maintenance and reconfiguration in many fields, such as the oil and gas (O&G) industry, offshore renewable energy (ORE), and undersea observatories. In the past few years, the authors' group has made some efforts in developing wet-mateable connectors. This paper presents a methodology for designing and testing a wet-mateable electrical connector. First, an innovative wet-mateable electrical connector with dual-bladder pressure-balanced oil-filled (PBOF) technology is proposed. Second, the generalized equations of differential pressure are derived. Then, a procedure of thermal-electric-structure (TES) coupling simulation is proposed, and a series of finite element analysis (FEA) involving coupled multi-field problems is conducted, including thermal-electric coupling analysis, static structural analysis, and dynamic analysis. Finally, a prototype of the proposed connector is developed successfully, and its electrical performance is verified by the online test in a hydrostatic pressure environment with an ocean depth of 3000 m, which has reached the leading level in China. This paper is the first discloser on wet-mateable connectors in the aspects of design, theory, simulation and testing, which might be helpful to many ocean scientists in developing countries who are technically blocked or could not afford the high cost. [ABSTRACT FROM AUTHOR]

This paper presents a hybrid model constituting dynamic smoothing technique and particle swarm optimization techniques to optimally size and control battery energy storage systems for wind energy ramp rate control and power system frequency performance enhancement. In today's modern power system, a high-proportion renewable energy grid is inevitable. This high-proportion renewable energy grid is a power system with abundant integration of renewable energy resources under the presence of energy storage tools. Energy storage tools are integrated into such power systems to balance the fluctuation and intermittence of renewable energy sources. One of the requirements in a high-proportion renewable energy grid is the fractional power balance between generation and load. One of the requirements set by power system regulators is the generation variation between two time points. A power producer is mandated to satisfy the ramp rate requirement set by the grid owner. This paper proposes dynamic smoothing techniques for initial size determination and particle swarm optimization based on optimal sizing and control of battery energy storage systems for ramp rate control and frequency regulation performance of a power system integrated with a large percentage of wind energy systems. Wind energy data taken from Zhangjiakou wind farm in China are used. The results indicate that the battery energy storage system improves the ramp rate characteristics of the wind farm. In addition, the virtual inertia capability of the battery energy storage system enabled the transient and steady-state frequency response of the test power system to improve significantly. [ABSTRACT FROM AUTHOR]

High renewable energy penetration increases the electricity seasonal imbalance in the long-term timescale. Power system planning needs to consider the optimal configuration of various flexibility resources and electricity balance in different timescales. The coupling of multiple timescales largely increases the computation complexity of the power system planning problem. Thus, this paper presents an efficient source-grid-storage co-planning model which incorporates a year-round hourly operation simulation. To improve the computation efficiency of the planning model, from the temporal scale, a self-adaptive compact panorama time series (CPTS) model is applied, which greatly reduces the number of variables related to short-term decisions. From the spatial scale, a network-constrained relaxed clustered unit commitment (NC-RCUC) model is introduced, which significantly reduces the number of variables related to unit commitment decisions. Case studies on the modified Garver’s 6-node system and HRP-38 system prove the validation and efficiency of the proposed model (“HRP” stands for high renewable penetration). The studies on the China power grid in 2035 demonstrate the future planning results of generation, transmission and storage in China power systems based on the proposed model. [ABSTRACT FROM AUTHOR]

In recent years, fossil energy reserves have decreased year by year, and the development and use of renewable energy has attracted great attention of governments all over the world. China continues to promote the high-quality development of renewable energy such as solar power generation. Accurate prediction of the share of solar power in China is beneficial to implementing the goals of carbon peaking and carbon neutralization. According to the website of China's National Bureau of statistics, the earliest annual data of China's solar power generation is 2017, which leads to there being very few data on the share of China's solar power generation. Therefore, the prediction accuracy of most prediction methods is low, and the advantages of the grey prediction model are shown. Based on the share of solar power in China from 2017 to 2020, this paper constructs an FGM (1,1) model, calculates r using the Particle Swarm Optimization (PSO) algorithm, and predicts the share of solar power in China in the next few years. r = 0.3858 and MAPE = 0.20% were obtained by calculation of the model. The prediction results show that the share of solar power generation in China will increase year by year, and it will reach about 4.2301% by 2030. In addition, it is found that the share of China's solar power generation in 2021 is 2.1520%, and the predicted value is 2.1906%. It can be seen that the prediction error is small. Finally, the limitations and future research directions are elucidated. The prediction results presented in this paper will help to guide the development of solar power generation in China, and are of great significance in speeding up the pace of energy structural adjustment, accelerating the construction of a clean, low-carbon, safe and efficient energy system, and promoting sustainable development. [ABSTRACT FROM AUTHOR]

In order to actively respond to the "14th Five-Year Plan," the PGA algorithm is used to develop a new energy planning strategy in this paper. The project can make full use of my country's abundant renewable energy resources, encourage energy conservation and reduction of emissions, improve the energy structure's low-carbon level, support the development of smart green energy, and achieve ecological civilization construction. This solution can show users how much greenhouse gas emissions can be reduced through some environmental changes, as well as the basic issues of meeting the future energy needs. It can display the benefits, costs, and emissions data under different scenarios in the future and use the scenario demonstration method to show energy planning to make energy data more vivid. It allows people, technicians, and decision makers to understand what will happen to China's carbon emissions over time in the next 15 years. This paper innovatively combines a particle swarm optimization algorithm with a genetic algorithm and designs a PGA algorithm for path optimization. In terms of carbon emission reduction, comparative trials demonstrate that the PGA algorithm's path optimization is 58.06 percent greater than the genetic algorithm; In terms of cost, the PGA algorithm's path optimization is 15.72% less expensive than the genetic algorithm's. This article provides a reference path for selecting the best results for future energy planning schemes and provides a new strategy for the "14th Five-Year" energy plan. [ABSTRACT FROM AUTHOR]

A Chinese solar greenhouse (CSG) is an agricultural facility type with Chinese characteristics. It can effectively utilize solar energy during low-temperature seasons in alpine regions. The low construction and operation costs make it a main facility for agricultural production in the northern regions of China. It plays an extremely important role in "Chinese vegetable basket projects". Energy is one of the important issues faced by CSGs. The better climate resources in the northern regions of China make it possible to apply solar energy as a green and sustainable energy source in the production of CSGs. Faced with the increasingly serious environmental problems of the new century, the Chinese government has made a decision and put it into practice to improve the rate and efficiency of solar energy utilization in agricultural facilities. In this paper, we summarize the research on the application of photovoltaic power generation and solar thermal technology in CSGs. The application of these advanced solar technologies has made great progress. With the further improvement of economic benefits and the establishment of relevant support policies and incentive mechanisms, the combination of CSG and solar energy technology will have certain application prospects and satisfy China's requirements for long-term sustainable development. [ABSTRACT FROM AUTHOR]

Climate change is directly linked to a broad array of changes because of disorganized activities within the economic system and human intervention. Climate change affects the well-being status of both non-living and living things. Relevant policies to mitigate and adapt to climate change conditions concentrate on solutions that intend to use renewable energy instead of fossil fuels or other conventional energy sources. This study aims to process a review focused on how renewables advance environmental quality and create relevant benefits within severe economic activities. This study elaborates on the case of China for two main reasons. First, China has a pivotal role in the economic system worldwide. Second, China is making serious attempts to transition into a low-carbon economy. An integrative review was processed to receive selected publications. The advantage of this process is that it considers empirical and non-empirical studies, policy papers, and conceptual frameworks. Inclusion and exclusion criteria were applied to retrieve the final number of publications. Review results from 39 well-acknowledged Journals provided 180 selected publications categorized into seven study groups: data analyses, model optimization studies, market issues, renewable energy technology publications, nuclear energy publications, ocean energy publications, and policy-related studies. Policy implications concern China's efforts to accelerate the integration of renewables in the energy mix. Hence, the country should increase energy efficiency in consumption and process investment plans based on robust research and development efforts. [ABSTRACT FROM AUTHOR]

With the promotion of carbon peaking and carbon neutrality goals and the construction of renewable-dominated electric power systems, renewable energy will become the main power source of power systems in China. Therefore, ensuring frequency stability and system security will emerge as pivotal challenges in the future development process. Created by combining a Li-ion battery and a supercapacitor, a hybrid energy storage system (HESS), which possesses robust power regulation capabilities and rapid response capabilities, holds promise for supporting the frequency stability of power systems. In this context, the assessment of the economic viability of HESSs providing multitype frequency response services becomes a critical factor in their deployment and promotion. In this paper, an economic analysis approach for a Li-ion battery–supercapacitor HESS towards a multitype frequency response is presented. First, a multitype frequency response-oriented operational mode for the HESS is designed, outlining the roles and functions of the Li-ion battery and the supercapacitor in delivering distinct services. Moreover, building upon the analysis of the power trajectory of Li-ion batteries, a lifetime model for the HESS is proposed based on the rain-flow counting method. Furthermore, considering the competitive landscape for the HESS in the frequency regulation ancillary service market, a full lifecycle economic assessment model is proposed. Finally, case studies on actual power system frequency data and PJM market data are performed to verify the effectiveness of the proposed method, and the simulation results confirm that the HESS exhibits robust performance and a competitive advantage in providing multitype frequency response services. Additionally, it demonstrates commendable economic benefits, establishing its potential as a valuable contributor to frequency response services. [ABSTRACT FROM AUTHOR]

Despite being a clean and renewable energy source, photovoltaic (PV) power generation faces severe challenges in operation due to its strong intermittency and volatility compared to the traditional fossil fuel power generation. Accurate predictions are therefore crucial for PV's grid connections and the system security. The existing methods often rely heavily on weather forecasts, the accuracy of which is hard to be guaranteed. This paper proposes a novel GBDT-BiLSTM day-ahead PV forecasting model, which leverages the Teacher Forcing mechanism to combine the strong time-series processing capabilities of BiLSTM with an enhanced GBDT model. Given the uncertainty and volatility inherent in solar energy and weather conditions, the gradient boosting method is employed to update the weak learner, while a decision tree is incorporated to update the strong learner. Additionally, to explore the correlation between photovoltaic power output and historical time-series data, the adaptive gradient descent-based Adam algorithm is utilized to train the bidirectional LSTM model, enhancing the accuracy and stability of mid- to long-term time-series predictions. A prediction experiment, conducting with the real data from a PV power station in Sichuan Province, China, was compared with other methods to verify the model's effectiveness and robustness. [ABSTRACT FROM AUTHOR]

Renewable energy (RE), the key to realizing the low-carbon transformation of energy, is significant in reducing social carbon emissions (CEs). However, the regional differences in the impact of RE on CEs and the impact mechanism are still unclear. Clarifying the regional differences and impact mechanisms will encourage the government to formulate a development plan for RE in line with the actual situation. To explore the heterogeneous impacts and conduction paths of RE on CEs, this paper uses province-level data from 2000 to 2019 in China. Based on clarifying regional CE efficiency, panel quantile regression models are introduced to assess the differential impacts of RE at different CE efficiencies. And the conduction mechanism of the effect of RE on CE efficiency is explored through the parallel multiple mediation effect model. The results show that RE development, the accumulation of social affluence, and technological innovation can improve carbon efficiency while increasing population size and energy consumption inhibit carbon efficiency. Urbanization rate, industrial structure, and opening to the outside world affect travel alienation in regions with different levels of CE efficiency. RE development improves regional CE efficiency, which is more evident in regions with low and high efficiency. In addition, RE can increase CE efficiency indirectly through effects on population size, urbanization rate, scientific and technological innovation, and intensity of fossil energy consumption. However, it decreases CE efficiency indirectly through social enrichment. These findings will provide broader insights for improving the development of regional RE and formulating differentiated policies. [ABSTRACT FROM AUTHOR]