Search

The utilization of branchwood as lignocellulosic raw material source for paper production may have the potential of solving the problem of the availability of raw material in the pulp and paper industry. This study therefore compared the chemical composition and fiber morphological indices (according to Franklin’s method) of stemwood and branchwood in Eucalyptus camaldulensis and Pinus halepensis trees grown in Egypt. The statistical analysis showed a significant effect of species, wood type (stem and branchwood), and their interaction on the measured chemical constituents and fiber morphological indices at 0.05 significance level. In both genera, the stemwood exhibited a higher percentage of cellulose and hemicellulose and was lower in lignin, total extractives, and ash than those measured in branchwood. Also in both genera, the stemwood was higher in fiber length, Runkel ratio, rigidity coefficient, Muhlsteph ratio, and Luce’s shape factor, and lower in basic density and flexibility coefficient than those in branchwood. Based on the chemical analysis and the fiber morphological indices, the stemwood and branchwood of both species were suitable for paper production with various qualities. Moreover, good correlations were found in both stem and branchwood between the basic density and the fiber wall thickness and fiber lumen diameter. ln contrast, there was an independent association between the stemwood basic density and the fiber length, and this relationship in branchwood was positive for both genera.

This contribution focuses on paper models of architectural surfaces, in particular on some roofing systems describable by developable ones. Drawing on an interdisciplinary approach, between Architecture and Mathematics, potentialities and criticalities of these models in explicitly conveying Geometry are investigated, in relation to educational and communicative tasks, both when they are used in a direct, tangible way, and when the use is mediated by images generated by them (thus indirect); we discuss on the possibility for models and images to communicate their explicit and implicit Geometries. The main issue discussed is that a material or analytical description unequivocally allows to grasp all the peculiarities of geometrical shapes, while other representations are subject to critical selection of data and are therefore affected by subjective interpretations; similarly, the translation of the physical model into images is the result of choices which emphasize certain object peculiarities over others and is thus less objective. Hence the importance of the physical model (as well as its digital counterparts) which, even if not used directly, can be complementary to a content that, alone, would be partial and/or misleading., img journal, No 2 (2020): Graphics

This study is aimed at exploring the writing ability improvement process of g roup B students in TK Nursa and investigating to what extend the processing result of writing ability can be improved through sand paper alphabet . This study was a classroom action research using Kemmis and Mc. Taggart research model. This study was conducted in 2 cycles with 6 meetings in each cycle where every cycle consisted of the following steps: planning, action and observation, reflection. The sample of this study was 1 2 Group B students comprissing of 5 male students and 7 female students. The instruments used in this study was observational sheet of students activities using sand paper alphabet . The data in this study were quantitative and qualitative data. Quantitative data were analyzed by using descriptive statistic to compare the result from the first and second cycle. While qualitative data from field notes and interview were analyzed through the following steps: data reduction, data display and data verification. The results of this study show that there is the improvement of writing ability through sand paper alphabet , proven by the writing ability mean score in pre-cycle which was 50,17 % improve to 67,15 % in cycle I and keep increasing becoming 76,04 % in cycle II.

Chemical medicine which are synthetic chemicals or isolation products must not be added to herbal medicine, that was standared by Indonesian Head of the Drug and Food Control Agency in statement regarding Criteria and Procedure for Registration of Traditional Medicines, Standardized Herbal Medicines, and Phytofarmaka. This study aims to develope prototype of paper-based color test-strip to identify paracetamol trace in several types of Indonesian herbal medicine, better known as Jamu. Research conducted with experimental research wich make paper test-strip prototype by immobilizing reagents into Whatman’s filter paper, then it used to identify paracetamol in extracted Jamu samples. The paracetamol qualitative test uses 10 Jamu samples that distributed in Samarinda area. were also carried out on. Comparison methode with qualitative color reaction tests using specific reagents in the laboratory were also carried out beside the paper-based color test-strip methode. In addition with positive control tests using 5000 ppm paracetamol solution to make sure both methode used are valid. The results of this study showed that two prototype paper-based color test-strips containing 10% iron (III) chloride reagent and folin ciocalteu were able to detect the presence of paracetamol chemicals in Jamu samples with color reaction.

This study aims to predict financial distress in pulp and paper companies in Indonesia. The data used are the financial statements of each pul and paper company listed on the Indonesia Stock Exchange in 2012-2017. Data analysis techniques used descriptive analysis with three methods of financial distress prediction, namely the Altman Z-Score, Springate, and Zmijewski methods. The results showed that the Zmijewski method is a prediction method with the highest accuracy rate of 100%, with an error type of 0%. The Altman Z-Score method has an accuracy rate of 28.6%, with an error type of 71.4%. While the Springate method has an accuracy rate of 14.3%, with an error type of 85.7%. Therefore an accurate prediction method to predict the potential for financial distress is the Zmijewski method.

This paper describes the design of the normalising tactic ring_exp for the Lean prover. This tactic improves on existing tactics by extending commutative rings with a binary exponent operator. An inductive family of types represents the normal form, enforcing various invariants. The design can also be extended with more operators.

In this study, it is aimed to determine the most suitable time series models with Box-Jenkins method, which is the most widely used in prediction studies. Export and import values have been predicted by 2020 with the most suitable models. The data used in this study were obtained from the Turkey Statistical Institute. Data are monthly data covering from January 2003 to December 2014. Sum of Squared Errors (SSE) and Mean Squared Error (MSE) criteria were taken into consideration when selecting the best Box-Jenkins models. Also, in order to test the success of forecasting of the models, Root mean Error Square (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) were used. As a result of the analyzes, it was determined that the most suitable models for export and import data were ARIMA (2,1,0) (0,0,1)12 and ARIMA(3,1,2)(1,0,1)12. It was predicted that the rate of exports meeting imports in paper and paper products of Turkey will be approximately 0.86 in 2020.

This study evaluated the fibre morphology of Musa balbisiana leaf, stalk and stem portions for pulp and paper production. Samples of Musa balbisiana portions were prepared and macerated in equal volume of glacial acetic acid and hydrogen peroxide in ratio 1:1. Twenty cellulose fibres from each portion were randomly selected using Reichert visopan microscope to determine the physical fibre morphology while the derived fibre indices were calculated. Data collected were subjected to one way Analysis of Variance (ANOVA). Follow up tests carried out using Duncan Multiple Range Test (DMRT). Results showed that means of fibre length, fibre diameter, cell wall thickness and lumen width ranged between 1.35 and 2.46 mm, 16.46 and 33.34 µm, 7.58 and 24.99 µm, and 3.54 and 3.56 µm, respectively. The mean values of fibre length of Musa balbisiana leaf and stalk were not significant but were significantly different from the mean values of the stem at p

Based on the use of Hevea brasiliensis in latex production, the species has a consolidated role in the Brazilian economy. However, at the end of the production cycle, which lasts from 25 to 30 years, resulting wood, in general, has no added value and is normally used for firewood, without further exploring its technological properties. Seeking to introduce this species into the pulp and paper industry, we aimed to determine the fiber quality of 20 commercial clones. Wood samples were collected from planted trees (11 to 12 years old) in the municipality of Selvíria - MS. We calculated wood quality indexes of H. brasiliensis for cellulose and paper, including Flexibility coefficient, Wall proportion, Runkel ratio, Slenderness ratio (Aspect ratio), and Luce's Shape Factor. The fiber quality indexes that best indicate the potential use of wood from Hevea brasiliensis clones for cellulose and paper production were Wall Fraction, Runkel Ratio and Luce's Shape Factor, indicating that H. brasiliensis fibers, if used for proper industrial purposes, will give origin of a rigid paper with greater bonding contact on the surface. The clones that presented better results for fiber quality indexes were IAC 311, IAC 41, IAN 873, IAC 326, IAC 40 and RRIM 725. Enabling the use of wood after the latex exploratory cycle for pulp and paper will serve as a basis for genetic improvement of these clones and expansion of forest plantations for this purpose. Atribuido al uso de Hevea brasiliensis en la producción de látex, una especie tiene un papel consolidado en la economía brasileña. Sin embargo, al final del ciclo de producción, que dura de 25 a 30 años, la madera resultante, por lo general, no tiene valor agregado y se utiliza normalmente en la producción de leña, sin conocimiento de sus propiedades tecnológicas. Con el objetivo de introducir esta especie en la industria de la pulpa y el papel, nos propusimos determinar la calidad de la fibra de 20 clones comerciales. Se recolectaron muestras de madera de árboles plantados (de 11 a 12 años) en la ciudad de Selvíria - MS. Calculamos los índices de calidad de la madera de H. brasiliensis para pulpa y papel: coeficiente de flexibilidad, fracción de pared, índice de Runkel, relación de esbeltez (relación de aspecto), factor de forma Luce. Los índices de calidad de la fibra que mejor indican el uso potencial de madera de clones de Hevea brasiliensis para la producción de celulosa y papel fueron: Wall Fraction, Runkel Ratio y Luce Form Factor, lo que indica que las fibras de la especie son utilizadas por los orígenes diseñados por la industria. a un papel rígido, con mayor contacto de unión en la superficie. Los clones con los mejores índices de calidad de fibra fueron IAC 311, IAC 41, IAN 873, IAC 326, IAC 40 y RRIM 725. Habilitar el uso de madera después del ciclo exploratorio del látex para pulpa y papel y servir como base para la mejora genética de clones y expansión de plantaciones forestales para estos metales. Devido ao uso de Hevea brasiliensis na produção de látex, a espécie tem um papel consolidado na economia brasileira. No entanto, ao final do ciclo produtivo, que dura de 25 a 30 anos, a madeira resultante, em geral, não apresenta valor agregado e é normalmente utilizada na produção de lenha, sem conhecimento de suas propriedades tecnológicas. Buscando introduzir esta espécie na indústria de celulose e papel, objetivamos determinar a qualidade das fibras de 20 clones comerciais. Amostras de madeira foram coletadas de árvores plantadas (11 a 12 anos) no município de Selvíria – MS. Calculamos os índices de qualidade da madeira de H. brasiliensis para celulose e papel: coeficiente de flexibilidade, fração de parede, índice de Runkel, razão esbeltez (razão de aspecto), fator de forma de Luce. Os índices de qualidade das fibras que melhor indicam o potencial emprego da madeira dos clones de Hevea brasiliensis para a produção de celulose e papel foram: Fração Parede, Razão Runkel e Fator de Forma de Luce, indicando que as fibras da espécie se utilizadas pela indústria dará origem a um papel rígido, com maior contato de união na superfície. Os clones que apresentaram melhores índices de qualidade das fibras foram IAC 311, IAC 41, IAN 873, IAC 326, IAC 40 e RRIM 725. Possibilitando a utilização da madeira pós ciclo exploratório do latéx para a celulose e papel e servindo de base para melhoramento genético desses clones e ampliação dos plantios florestais para essa finalidade.

Borassus flabellifer L., one of the palm-based commodities in Indonesia which is grows in dry areas especially around the north coast of Java Island. An abundant waste of this plant is a leaf midrib and fruit fiber have an opportunity as a source of lignocellulose for the paper industry. In this study, Kraft paper production was conducted to know the influence of the proportion of Borassus flabellifer L. leaf midrib pulp and fruit fiber pulp, and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of kraft paper. The research method used was Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of kraft paper. The physical quality of kraft paper was used ANOVA analysis. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but not significantly different between treatment of gramature and tear resistance. The best treatment of sensory tests was kraft paper with proportion of leaf midrib pulp 50% and fruit fiber pulp 50% and a 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, gramature of 162.80 g/m2, tensile strength of 1.70 %, and tear resistance of 197.6 gf.

The article analyzes the separation of fats from paper waste packaging. The method is based on interaction with boiling water and greaseproof paper. The cooking process is considered the formation of emulsions according to different slots. The research data are presented and discussed obtained from the analysis of ready-made samples. 20 different fat-coated paper samples have been prapared for research. Ten of them have been selected for printing paper, and another dozen cartons. The half of the samples analyzed are covered with vegetable fat, the remaining samples are vegetable fat. It was found that the carton samples were less opposed to the separation of fat. During the experiment, it was determined that by cooking the cardboard samples coated with olive oil for 5 minutes, 30% of the total fat content was removed. The most effective samples of this type were heated for a long time. Santrauka Straipsnyje nagrinėjamas riebalų atskyrimas nuo popieriaus pakuočių atliekų. Metodas remiasi verdančio vandens ir riebalų sąveika su suterštu popieriumi. Nagrinėjamas virimo procesas, emulsijų susidarymas atsižvelgiant į skirtingus laiko tarpsnius. Pateikiami ir aptariami tyrimų duomenys, kurie gauti išnagrinėjus pasiruoštus mėginius. Iš viso pasiruošta 20 skirtingų riebalais padengto popieriauspavyzdžių. Dešimčiai iš jų pasirinktas spausdinimo popierius, kita dešimtis– kartonas. Pusė analizuojamų mėginių padengti augalinių riebalų sluoksniu, likę mėginiai– gyvulinių riebalų sluoksniu. Pastebėta, kad kartono mėginiai mažiau priešinosi riebalų atskyrimui. Nustatyta, kad, 5 min. virinant kartono mėginius, padengtus alyvuogių aliejumi, pasišalino 30% viso riebalų kiekio. Efektyviausia tokio tipo mėginius virti ilgą laiką, nes, panardinus mėginius 15 min. į verdantį vandenį, pasišalino daugiau nei pusė buvusių riebalų kiekio– 55%. Reikšminiai žodžiai:atliekos, emulsija, popierius, popieriaus pakuotės, riebalai, šiluma, vanduo, virimas.

This research work deals with modification of the color of paper in commercial clupak dynamic image registration. According to the standard technology of production of kraft pulp, from which the production clupak paper, the paper obtained is dark brown in color. Market demand is based on quality and price of the product. Step further in these demands is demand for certain balanced and brighter shade of color of sack kraft paper. Lately it is demanded from our company to produce sack kraft paper with lighter shade of color. This problem can be solved in two ways: by coloring pulp fiber and by bleaching it. Methods of production of sack kraft paper with lighter shade, as well as results achieved, will be presented in this document.

This study evaluates the efficacy of using textile waste blended with paper waste to form biodegradable seedling pots. A bio-composite blend of cotton (20% cotton, 40% newspaper, and 40% corrugated cardboard) and polycotton (20% polycotton, 40% newspaper, and 40% corrugated cardboard) with an optimum strength was formed into seedling pots. The appreciated seedling pots (untreated blends of cotton and polycotton) were compared with the commercial pots (cardboard seed starter pot and Jiffy pot) in terms of mechanical properties (tensile strength and compressive strength), biodegradability (soil burial test and anaerobic digestion), and seed germination. The untreated blends of cotton and polycotton pots demonstrated a comparable optimum strength, while the Jiffy pot and cardboard seed starter pot obtained the least tensile and compressive strengths, respectively. The anaerobic biodegradability assay suggests that the cotton blend pot, polycotton blend pot, and cardboard seed starter pot can degrade anaerobically because of high biogas and methane generation potential. A 100% seed germination was observed from the four seedling pots tested. Thus, the results demonstrate the efficacy of utilizing textile waste and paper waste to develop seedling pots with desirable strength and biodegradability compared to the commercial pots.