Search

This paper focuses on the analysis of traffic streams on two-lane highways, which are crucial components of transportation networks. Traffic flow measurement technologies, such as detection stations, radar guns, or video cameras, have been used over the years to detect the level of traffic and the operating conditions. This type of sensor can record a large amount of data which is useful to evaluate and monitor road traffic conditions, and it is possible to identify free-moving and constrained vehicles by processing the collected data. This study introduces an exponential headway model to identify the headway threshold above which vehicles can be considered as unconditioned. However, this value could identify vehicles which still retain some autonomy in their speed and maneuvering. Therefore, an additional criterion to distinguish between apparently and actually conditioned vehicles has been introduced, analyzing the speed differences between a vehicle and the preceding one. Three-month sequences of traffic monitored through radar devices placed on some Italian two-lane roads have been analyzed and an exponential headway model has been introduced, as an illustrative example. The results show that introducing the criterion of maneuvering freedom can significantly improve traffic flow analysis, modifying the starting critical values of 4 and 8 s per each studied section, to 2.5 and 3 s, approaching the values suggested by international manuals for traffic flow quality analysis. [ABSTRACT FROM AUTHOR]

Millions of commuters face congestion as a part of their daily routines. Mitigating traffic congestion requires effective transportation planning, design, and management. Accurate traffic data are needed for informed decision making. As such, operating agencies deploy fixed-location and often temporary detectors on public roads to count passing vehicles. This traffic flow measurement is key to estimating demand throughout the network. However, fixed-location detectors are spatially sparse and do not cover the entirety of the road network, and temporary detectors are temporally sparse, providing often only a few days of measurements every few years. Against this backdrop, previous studies proposed that public transit bus fleets could be used as surveillance agents if additional sensors were installed, and the viability and accuracy of this methodology was established by manually processing video imagery recorded by cameras mounted on transit buses. In this paper, we propose to operationalize this traffic surveillance methodology for practical applications, leveraging the perception and localization sensors already deployed on these vehicles. We present an automatic, vision-based vehicle counting method applied to the video imagery recorded by cameras mounted on transit buses. First, a state-of-the-art 2D deep learning model detects objects frame by frame. Then, detected objects are tracked with the commonly used SORT method. The proposed counting logic converts tracking results to vehicle counts and real-world bird's-eye-view trajectories. Using multiple hours of real-world video imagery obtained from in-service transit buses, we demonstrate that the proposed system can detect and track vehicles, distinguish parked vehicles from traffic participants, and count vehicles bidirectionally. Through an exhaustive ablation study and analysis under various weather conditions, it is shown that the proposed method can achieve high-accuracy vehicle counts. [ABSTRACT FROM AUTHOR]

Based on spatial data dynamic analysis technology, the characteristics of urban rail transit passenger flow are analyzed. This study analyzes the passenger flow characteristics of urban rail transit from the perspective of operation and planning by using the dynamic analysis technology of spatial data, combined with social and economic development. Based on the analysis of research data from the study of passenger traffic and passenger traffic data measurement, the characteristics of passenger traffic from urban railways are derived from the time distribution, spatial distribution, and transfer of passengers waiting on the platform. The final length of line 3 is 39.7 m, the passenger volume is 102, with 11 people/day, the passenger flow density is 1.8/2.3, and the high section in peak hours is 2.4/3.2. By considering the various influencing factors, efforts should be made to develop urban rail transit projects to promote the growth of social and economic benefits. [ABSTRACT FROM AUTHOR]

Traffic forecasting plays a critical role in intelligent transportation systems (ITS) in smart cities. Travelers as well as urban managers rely on reliable traffic information to make their decisions for route choice and traffic management. However, noisy or missing traffic data poses a problem for accurate and robust traffic forecasting. While data-driven models such as deep neural networks can achieve high prediction accuracy with complete datasets, sensor malfunctions, and environmental effects degrade the performance of such models, as these models rely heavily on precise traffic measurements for model training and estimation. Consequently, incomplete traffic data poses a challenge for robust model design that can make accurate traffic forecasts with noisy/missing data. This research proposes the Robust Spatiotemporal Graph Convolutional Network (RT-GCN), a traffic prediction model that handles noise perturbations and missing data using a Gaussian distributed node representation and a variance based attention mechanism. Through experiments conducted on four real-world traffic datasets using diverse noisy and missing scenarios, the proposed RT-GCN model has demonstrated its ability to handle noise perturbations and missing values and provide high accuracy prediction. • Gaussian distribution representation enhance inherent robustness of neural network. • Variance-based attention mechanism reduce the propagation of perturbation. • Batch Random Noise help improve robustness during training phase. • Models are tested on both noisy and missing datasets. • Diverse perturbation scenarios are considered in experiments. [ABSTRACT FROM AUTHOR]

Advanced analysis of road traffic data is an essential component of today's intelligent transportation systems. This paper presents a video-based vehicle speed measurement system based on a proposed mathematical model using a movement pattern vector as an input variable. The system uses the intrusion line technique to measure the movement pattern vector with low computational complexity. Further, the mathematical model introduced to generate the pdf (probability density function) of a vehicle's speed that improves the speed estimate. As a result, the presented model provides a reliable framework with which to optically measure the speeds of passing vehicles with high accuracy. As a proof of concept, the proposed method was tested on a busy highway under realistic circumstances. The results were validated by a GPS (Global Positioning System)-equipped car and the traffic regulations at the measurement site. The experimental results are promising, with an average error of 1.77 % in challenging scenarios. [ABSTRACT FROM AUTHOR]

Recently, the correct estimation of traffic flowhas begun to be considered an essential component in intelligent transportation systems. In this paper, a new statistical method to predict traffic flows using time series analyses and geometric correlations is proposed. The novelty of the proposed method is two-fold: (1) a 3D heat map is designed to describe the traffic conditions between roads, which can effectively represent the correlations between spatially- and temporally-adjacent traffic states; and (2) the relationship between the adjacent roads on the spatiotemporal domain is represented by cliques in MRF and the clique parameters are obtained by example-based learning. In order to assess the validity of the proposed method, it is tested using data from expressway traffic that are provided by the Korean Expressway Corporation, and the performance of the proposed method is compared with existing approaches. The results demonstrate that the proposed method can predict traffic conditions with an accuracy of 85%, and this accuracy can be improved further. [ABSTRACT FROM AUTHOR]

Short-time traffic flow prediction is necessary for advanced traffic management system (ATMS) and advanced traveler information system (ATIS). In order to improve the effect of short-term traffic flow prediction, this paper presents a short-term traffic flow multistep prediction method based on similarity search of time series. Firstly, the landmark model is used to represent time series of traffic flow data. Then the input data of prediction model are determined through searching similar time series. Finally, the echo state networks model is used for traffic flow multistep prediction. The performance of the proposed method is measured with expressway traffic flow data collected from loop detectors in Shanghai, China. The experimental results demonstrate that the proposed method can achieve better multistep prediction performance than conventional methods. [ABSTRACT FROM AUTHOR]

Although more attention has been attracted to benefit evaluation of Intelligent Transportation Systems (ITS) deployment, how ITS impact the traffic system and make great effects is little considered. As a subsystem of ITS, in this paper, Intelligent Transportation Management System (ITMS) is studied with its impact mechanism on the road traffic system. Firstly, the correlative factors between ITMS and the road traffic system are presented and 3 positive feedback chains are defined. Secondly, we introduce the theory of Fundamental Diagram (FD) and traffic system entropy to demonstrate the correlative relationship between ITMS and feedback chains. The analyzed results show that ITMS, as a negative feedback factor, has damping functions on the coupling relationship of all 3 positive feedback chains. It indicates that with its deployment in Beijing, ITMS has impacted the improvement of efficiency and safety for the road traffic system. Finally, related benefits brought by ITMS are presented corresponding to the correlative factors, and effect standards are identified for evaluating ITMS comprehensive benefits. [ABSTRACT FROM AUTHOR]

Present systems for road traffic surveillance largely utilize MEMS magnetometers for the purpose of vehicle detection and classification. Magnetoresistive sensing or LR oscillation circuitry are technologies providing the sensors with the competitive advantage which lies in the energy efficiency and low price. There are several chip suppliers on the market who specialize in the development of these sensors. The aim of this paper is to compare available sensors from the viewpoint of their suitability for traffic measurements. A summary of the achieved results is given in the form of the score for each sensor. The introduced sensor chart should provide the audience with knowledge about pros and cons of sensors, especially if intended for the purposes of road traffic surveillance. The authors in this research focused on the specific situation of road traffic monitoring with magnetometers placed at the roadside. [ABSTRACT FROM AUTHOR]

No abstract is available for this article. [ABSTRACT FROM AUTHOR]

Vehicle driving path planning is an important information service in intelligent transportation systems. As an important basis for path planning optimization, the travel time prediction method has attracted much attention. However, traffic flow has features of high nonlinearity, time-varying, and uncertainty, which makes it hard for prediction method with single feature to meet the accuracy demand of intelligent transportation system in big data environment. In this paper, the historical vehicle Global Positioning System (GPS) information data is used to establish the traffic prediction model. Firstly, the Clustering in QUEst (CLIQUE)-based clustering algorithm V-CLIQUE is proposed to analyze the historical vehicle GPS data. Secondly, an artificial neural network (ANN)-based prediction model is proposed. Finally, the ANN-based weighted shortest path algorithm, A-Dijkstra, is proposed. We used mean absolute percentage error (MAPE) to evaluate the predictive model and compare it with the predicted results of Average and support regression vector (SRV). Experiments show that the improved ANN path planning model we proposed can accurately predict real-time traffic status at the given location. It has less relative error and saves time for users' travel while saving social resources. [ABSTRACT FROM AUTHOR]