Search

When young children do not receive adequate amounts of the micronutrient iodine in their diet, their growth and cognitive development can be impaired. Nearly every country in the world has programs in place to track iodine intake and provide supplemental iodine if needed, usually in the form of fortified salt. The iodine nutrition status of a population can be tracked by monitoring iodine levels in urine samples to see if the median value falls in the range of 100–300 micrograms of iodine per liter of urine (μg I/L), which indicates adequate or more than adequate iodine nutrition. Many low and middle-income countries (LMIC) do not have a laboratory capable of carrying out this challenging assay, so samples must be sent out for assay in external labs, which is expensive and time-consuming. In most LMIC, population iodine surveys are carried out every 5–10 years, which limits the utility of the data for program monitoring and evaluation. To solve this problem, we developed a field-friendly paper test card that uses the Sandell-Kolthoff reaction to measure urinary iodine levels. A blind internal validation study showed that 93% of samples (n = 60) of iodide in an artificial urine matrix were categorized correctly by visual analysis as deficient, adequate, or excessive for levels set forth by the World Health Organization. Quantitative measurements based on computer image analysis had an error of 40 ± 20 μg I/L (n = 35 for samples in the calibration range) and these results categorized 88% of the samples (n = 60) correctly. We employed lifecycle analysis principles to address the known toxicity of arsenic, which is an obligatory reagent in the Sandell-Kolthoff reaction. Disposal of the cards in a landfill (their most likely destination after use) could let arsenic leach into groundwater; toxicity characteristic leaching procedure (TCLP) tests showed that the level of arsenic leached from the cards was 28.78 ppm, which is above the United States Environmental Protection Agency’s limit of 5 parts per million for solid waste. We integrated a remediation module into the card. This module contains oxone, to oxidize As(III) to As(V) oxyacids, and the iron oxide goethite. TCLP testing showed that the leachable amount of arsenic was reduced by at least 97.6%—from 28.8 ppm to lower than 0.7 ± 0.7 ppm (n = 20). This upstream intervention rendered the test card suitable for landfilling while retaining its functionality to perform a critical public health evaluation. [ABSTRACT FROM AUTHOR]

Lung neuroendocrine neoplasms (LNENs) are lesions originating from diffuse endocrine cells within the bronchial walls and lung parenchyma. In recent years, there have been significant advances in the diagnosis and therapy of these neoplasms. This paper reviews recent developments in these areas, focusing on the latest research and treatment strategies. In the context of diagnosis, new imaging technologies including high-resolution computed tomography (CT), high-resolution and positron emission tomography-computed tomography (PET-CT) imaging, are providing more precise information on tumor spread and evaluation of metabolic activity. Advances in the field of molecular biomarkers allow a more personalized approach to the diagnosis of LNENs. In the therapeutic area, new targeted drugs and immunotherapy are showing promise in the treatment of LNENs. The development of molecular therapies such as tyrosine kinase inhibitors and somatostatin analogs, is opening up new treatment perspectives, increasing the efficacy of therapy, and improving patient quality of life. The paper also focuses on important research directions and clinical advances in the diagnosis and therapy of LNENs, presenting the current state of knowledge about these rare tumors. The conclusions aim to provide a synthetic view of the latest developments in the field, encouraging further research and improving treatment strategies for LNENs. [ABSTRACT FROM AUTHOR]

This paper proposes SAR imaging algorithm with largest coherence based on the existing SAR imaging algorithm. The basic idea of SAR imaging algorithm in imaging processing is that output signal can have maximum signal-to-noise ratio (SNR) by using the optimal imaging parameters. Traditional imaging algorithm can acquire the best focusing effect, but would bring the decoherence phenomenon in subsequent interference process. Algorithm proposed in this paper is that SAR echo adopts consistent imaging parameters in focusing processing. Although the SNR of the output signal is reduced slightly, their coherence is ensured greatly, and finally the interferogram with high quality is obtained. In this paper, two scenes of Envisat ASAR data in Zhangbei are employed to conduct experiment for this algorithm. Compared with the interferogram from the traditional algorithm, the results show that this algorithm is more suitable for SAR interferometry (InSAR) research and application. [ABSTRACT FROM AUTHOR]

Magnetic resonance imaging (MRI) is a technique useful for the diagnosis of cartilage damage due to high sensitivity to identify subchondral bone abnormalities and full-thickness cartilage lesions. The lack of a study on knee cartilage changes over time in patients with osteoarthritis (OA) by MRI technique led us to investigate the accuracy of MRI in identifying knee cartilage changes over time in patients with OA in a systematic review. In the present systematic review, started from the beginning of 2020 in one of the University Hospitals in Iran, the databases of CINAHL, Ovid, Elsevier, Scopus, PubMed, Science Direct, and Web of Science were searched using the keywords MRI, OA, Cartilage Lesion, Imaging Techniques. A total of 169 articles were retrieved in the initial search, and after reviewing the titles, abstracts, and full-texts, finally, seven were enrolled in the systematic review. Review of the selected papers showed that a total of 1091 subjects were studied, of which 355 were males. The results of all the studies, except one, indicated the high accuracy of MRI to identify knee cartilage changes over time. MRI technique can show cartilage changes with high accuracy in patients with knee OA over time. We proved the potential of MRI to identify articular cartilage injuries in patients with OA and its importance to the evaluation of articular cartilage lesions along with other available techniques. [ABSTRACT FROM AUTHOR]

The performance of asphalt concrete (AC) mixtures depends highly on their internal structure and the interaction of the mixture components under different loading conditions. Imaging techniques provide effective tools that can assess the microstructure and failure mechanisms of materials. Imaging techniques have been used in recent research studies to examine and analyze the evolution of the internal structure of AC mixtures resulting from traffic and environmental loading. Increasing knowledge of the microstructural properties and mechanical behaviour of AC mixtures could improve the design process and enable researchers to develop more accurate prediction models for the long-term performance of pavements. This paper reviews three imaging techniques which were used to characterize the microstructure of AC mixtures. These three imaging techniques are digital camera imaging, scanning electron microscope (SEM) imaging, and X-ray computed tomography (CT) scan. Extensive insight has been presented into these imaging techniques, including their principles, methods, sample preparation, and associated instruments. This review provides guidelines for future research on using these imaging techniques to analyze the microstructure of AC mixtures and assess their long-term performance. [ABSTRACT FROM AUTHOR]

Background: Many classification methods have been proposed based on magnetic resonance images. Most methods rely on measures such as volume, the cerebral cortical thickness and grey matter density. These measures are susceptible to the performance of registration and limited in representation of anatomical structure. This paper proposes a two-stage local feature fusion method, in which deformable registration is not desired and anatomical information is represented from moderate scale. Methods: Keypoints are firstly extracted from scale-space to represent anatomical structure. Then, two kinds of local features are calculated around the keypoints, one for correspondence and the other for representation. Scores are assigned for keypoints to quantify their effect in classification. The sum of scores for all effective keypoints is used to determine which group the test subject belongs to. Results: We apply this method to magnetic resonance images of Alzheimer's disease and Parkinson's disease. The advantage of local feature in correspondence and representation contributes to the final classification. With the help of local feature (Scale Invariant Feature Transform, SIFT) in correspondence, the performance becomes better. Local feature (Histogram of Oriented Gradient, HOG) extracted from 16×16 cell block obtains better results compared with 4×4 and 8×8 cell block. Discussion: This paper presents a method which combines the effect of SIFT descriptor in correspondence and the representation ability of HOG descriptor in anatomical structure. This method has the potential in distinguishing patients with brain disease from controls. [ABSTRACT FROM AUTHOR]

Applications of non-invasive sensing techniques to investigate the internal structure and surface of precious and delicate objects represent a very important and consolidated research field in the scientific domain of cultural heritage knowledge and conservation. The present article is the first of three reviews focused on contact and non-contact imaging techniques applied to surveying cultural heritage at micro- (i.e., manufacts), meso- (sites) and macro-scales (landscapes). The capability to infer variations in geometrical and physical properties across the inspected surfaces or volumes is the unifying factor of these techniques, allowing scientists to discover new historical sites or to image their spatial extent and material features at different scales, from landscape to artifact. This first part concentrates on the micro-scale, i.e., inspection, study and characterization of small objects (ancient papers, paintings, statues, archaeological findings, architectural elements, etc.) from surface to internal properties. [ABSTRACT FROM AUTHOR]

Complex network theory has been successful at unveiling the topology of the brain and showing alterations to the network structure due to brain disease, cognitive function and behavior. Functional connectivity networks (FCNs) represent different brain regions as the nodes and the connectivity between them as the edges of a graph. Graph theoretic measures provide a way to extract features from these networks enabling subsequent characterization and discrimination of networks across conditions. However, these measures are constrained mostly to binary networks and highly dependent on the network size. In this paper, we propose a novel graph-to-signal transform that overcomes these shortcomings to extract features from functional connectivity networks. The proposed transformation is based on classical multidimensional scaling (CMDS) theory and transforms a graph into signals such that the Euclidean distance between the nodes of the network is preserved. In this paper, we propose to use the resistance distance matrix for transforming weighted functional connectivity networks into signals. Our results illustrate how well-known network structures transform into distinct signals using the proposed graph-to-signal transformation. We then compute well-known signal features on the extracted graph signals to discriminate between FCNs constructed across different experimental conditions. Based on our results, the signals obtained from the graph-to-signal transformation allow for the characterization of functional connectivity networks, and the corresponding features are more discriminative compared to graph theoretic measures. [ABSTRACT FROM AUTHOR]

Our study aimed to evaluate the trends of post retraction citations of articles reporting a radiology-imaging diagnostic method and to find if a different pattern exists between manuscripts reporting an ultrasound method and those reporting other radiology diagnostic methods. This study reviewed retractions stored in PubMed on the subject of radiology-imaging diagnosis to identify the motivation, time from publication to retraction, and citations before and after retraction. The PubMed database was searched on June 2017 to retrieve the retracted articles, and the Scopus database was screened to identify the post-retraction citations. The full text was screened to see the type of post-retraction citation (positive/negative) and whether the cited article appears or not as retracted. One hundred and two retractions were identified, representing 3.5% of the retracted articles indexed by PubMed, out of which 54 were included in the analysis. Half of the articles were retracted in the first 24 months after publication, and the number of post retraction citations was higher than the number of citations before retraction in 30 out of 54 cases (US methods: 9/20, other diagnostic methods 21/34, P-value = 0.2312). The plagiarism was the most common reason for retraction (31%), followed by repetitive publication (26%), and errors in data/manuscript (24%). In less than 2% of cases, the retracted articles appear as retracted in the text or reference list, while the negative citation is observed in 4.84% among manuscripts reporting an US diagnostic method and 0.32% among manuscripts reporting a diagnostic method other than US (P-value = 0.0004). No significant differences were observed when post retraction weighted citation index (WCI, no. of citations weighted by citation window) was compared to WCI prior retraction (P-value = 0.5972). In light of the reported results, we enumerated some recommendations that could potentially minimize the referral to retracted studies as valid. [ABSTRACT FROM AUTHOR]

With the increase of the camera resolution, the number of pixels contained in froth image is increased, which brings many challenges to image segmentation. Froth size and distribution are the important index in froth flotation. The segmentation of froth images is always a problem in building flotation model. In segmenting froth images, Otsu method is usually used to get a binary image for classification of froth images, this method can get a satisfactory segmentation result. However, each gray level is required to calculate each of the between-class variance, it takes a longer time in froth images with a large number of pixels. To solve this problem, an improved method is proposed in this paper. Most froth images have the pixel distribution characteristic that the gray histogram curve is a sawtooth shape. The proposed method uses polynomial to fit the curve of gray histogram and takes the characteristic of gray histogram's valley into consideration in Otsu method. Two performance comparison methods are introduced and used. Experimental comparison between Otsu method and the proposed method shows that the proposed method has a satisfactory image segmentation with a low computing time. [ABSTRACT FROM AUTHOR]

Analysis of functional magnetic resonance imaging (fMRI) data has revealed that brain regions can be grouped into functional brain networks (fBNs) or communities. A community in fMRI analysis signifies a group of brain regions coupled functionally with one another. In neuroimaging, functional connectivity (FC) measure can be utilized to quantify such functionally connected regions for disease diagnosis and hence, signifies the need of devising novel FC estimation methods. In this paper, we propose a novel method of learning FC by constraining its rank and the sum of non-zero coefficients. The underlying idea is that fBNs are sparse and can be embedded in a relatively lower dimension space. In addition, we propose to extract overlapping networks. In many instances, communities are characterized as combinations of disjoint brain regions, although recent studies indicate that brain regions may participate in more than one community. In this paper, large-scale overlapping fBNs are identified on resting state fMRI data by employing non-negative matrix factorization. Our findings support the existence of overlapping brain networks. [ABSTRACT FROM AUTHOR]

This paper describes and presents a stable and reliable set of stereo-photogrammetric normative data for global and spino-pelvic sagittal alignment, as a proven reference system for evaluating/measuring a fully unconstrained natural upright neutral standing attitude in a young healthy adult population. The methodological features described in this article will enable future studies to replicate and/or directly compare a wide range of different postural tests and/or sagittal alignment assessment procedures including the study of sagittal spine shape variations occurring during gait performance. To date, the quantitative evaluation of adult spinal deformity (ASD) has been mainly confined to the X-ray imaging approach and, more recently, to 3D X-ray reconstruction. Within the existing evaluation framework an opportunity exists for an additional approach: a quantitative evaluation procedure which is easy, accurate, relatively speedy and non-ionising, in order to monitor and track the progress of patients in the areas of both surgical and non-surgical treatment. The resources and methodology described in this paper have been proven to meet all these criteria. They have enabled full 3D posture (including 3D spine shape and sagittal alignment of the skeleton) to be consistently and successfully measured in adult volunteers. All the measurement/evaluation procedures and outcomes carried out were based entirely on the new non-ionising 3D opto-electronic stereo-photogrammetric approach described in this article. The protocol for this methodology was based on a standard set of 27 pre-selected anatomical “landmarks” on the human body, providing standard reference points for observation and measurement. A total of 124 healthy subjects were successfully assessed and, for each subject, 27 individual markers were applied to the corresponding locations on his/her body. Statistical tests to investigate gender differences were also carried out. Descriptive statistics are provided for all 15 of the spino-pelvic parameters under consideration. Results indicated significant differences between genders in five sets of parameters: Kyphosis tilt, Head tilt, Pelvic tilt, Spino-pelvic angle and T1-pelvic angle. The data also demonstrate a high degree of congruity with results obtained using the X-ray method, as evidenced by the existing literature in the field. In summary, the current study presents a new stereo-photogrammetric opto-electronic technology which can be used successfully for ASD evaluation and introduces a comprehensive set of normative data analogous to those proposed in X-ray analysis for sagittal spino-pelvic and total body alignment. [ABSTRACT FROM AUTHOR]

Analyzing geological drilling hole images acquired by Axial View Panoramic Borehole Televiewer (APBT) is a key step to explore the geological structure in a geological exploration. Conventionally, the borehole images are examined by technicians, which is inefficient and subjective. In this paper, three dominant types of borehole-wall images on coal-rock mass structure, namely, border images, fracture images and intact rock mass images are mainly studied. The traditional image classification methods based on unified feature extraction algorithm and single classifier is not effect for the borehole images. Therefore, this paper proposes a novel two-stage classification approach to improve the classification performance of borehole images. In the first-stage classification, the border images are identified from three kinds of images based on texture features and gray-scale histograms features. For the remaining two types of images, in the second-stage classification, Gabor filter is first applied to segment the region of interest (ROI) (such as microfracture, absciss layer and horizontal cracks, etc.) and the central interference region. Then, using the same feature vector after eliminating the central interference region, fracture images are separated from intact rock mass images. We test our two-stage classification system with real borehole images. The results of experimental show that the two-stage classification method can effectively classify three major borehole-wall images with the correction rate of 95.55% in the first stage and 95% in the second stage. [ABSTRACT FROM AUTHOR]

The integrity of image content is essential, although most watermarking algorithms can achieve image authentication but not automatically repair damaged areas or restore the original image. In this paper, a self-recovery reversible image watermarking algorithm is proposed to recover the tampered areas effectively. First of all, the original image is divided into homogeneous blocks and non-homogeneous blocks through multi-scale decomposition, and the feature information of each block is calculated as the recovery watermark. Then, the original image is divided into 4×4 non-overlapping blocks classified into smooth blocks and texture blocks according to image textures. Finally, the recovery watermark generated by homogeneous blocks and error-correcting codes is embedded into the corresponding smooth block by mapping; watermark information generated by non-homogeneous blocks and error-correcting codes is embedded into the corresponding non-embedded smooth block and the texture block via mapping. The correlation attack is detected by invariant moments when the watermarked image is attacked. To determine whether a sub-block has been tampered with, its feature is calculated and the recovery watermark is extracted from the corresponding block. If the image has been tampered with, it can be recovered. The experimental results show that the proposed algorithm can effectively recover the tampered areas with high accuracy and high quality. The algorithm is characterized by sound visual quality and excellent image restoration. [ABSTRACT FROM AUTHOR]

Background: Alzheimer’s disease neuroimaging initiative (ADNI) is a landmark imaging and omics study in AD. ADNI research literature has increased substantially over the past decade, which poses challenges for effectively communicating information about the results and impact of ADNI-related studies. In this work, we employed advanced information visualization techniques to perform a comprehensive and systematic mapping of the ADNI scientific growth and impact over a period of 12 years. Methods: Citation information of ADNI-related publications from 01/01/2003 to 05/12/2015 were downloaded from the Scopus database. Five fields, including authors, years, affiliations, sources (journals), and keywords, were extracted and preprocessed. Statistical analyses were performed on basic publication data as well as journal and citations information. Science mapping workflows were conducted using the Science of Science (Sci2) Tool to generate geospatial, topical, and collaboration visualizations at the micro (individual) to macro (global) levels such as geospatial layouts of institutional collaboration networks, keyword co-occurrence networks, and author collaboration networks evolving over time. Results: During the studied period, 996 ADNI manuscripts were published across 233 journals and conference proceedings. The number of publications grew linearly from 2008 to 2015, so did the number of involved institutions. ADNI publications received much more citations than typical papers from the same set of journals. Collaborations were visualized at multiple levels, including authors, institutions, and research areas. The evolution of key ADNI research topics was also plotted over the studied period. Conclusions: Both statistical and visualization results demonstrate the increasing attention of ADNI research, strong citation impact of ADNI publications, the expanding collaboration networks among researchers, institutions and ADNI core areas, and the dynamic evolution of ADNI research topics. The visualizations presented here can help improve daily decision making based on a deep understanding of existing patterns and trends using proven and replicable data analysis and visualization methods. They have great potential to provide new insights and actionable knowledge for helping translational research in AD. [ABSTRACT FROM AUTHOR]

Human fingers are 3D objects. More information will be provided if three dimensional (3D) fingerprints are available compared with two dimensional (2D) fingerprints. Thus, this paper firstly collected 3D finger point cloud data by Structured-light Illumination method. Additional features from 3D fingerprint images are then studied and extracted. The applications of these features are finally discussed. A series of experiments are conducted to demonstrate the helpfulness of 3D information to fingerprint recognition. Results show that a quick alignment can be easily implemented under the guidance of 3D finger shape feature even though this feature does not work for fingerprint recognition directly. The newly defined distinctive 3D shape ridge feature can be used for personal authentication with Equal Error Rate (EER) of ~8.3%. Also, it is helpful to remove false core point. Furthermore, a promising of EER ~1.3% is realized by combining this feature with 2D features for fingerprint recognition which indicates the prospect of 3D fingerprint recognition. [ABSTRACT FROM AUTHOR]

Sentence-initial temporal clauses headed by before, as in "Before the scientist submitted the paper, the journal changed its policy", have been shown to elicit sustained negative-going brain potentials compared to maximally similar clauses headed by after, as in "After the scientist submitted the paper, the journal changed its policy". Such effects may be due to either one of two potential causes: before clauses may be more difficult than after clauses because they cause the two events in the sentence to be mentioned in an order opposite the order in which they actually occurred, or they may be more difficult because they are ambiguous with regard to whether the event described in the clause actually happened. The present study examined the effect of before and after clauses on sentence processing in both sentence-initial contexts, like those above, and in sentence-final contexts ("The journal changed its policy before/after the scientist submitted the paper"), where an order-of-mention account of the sustained negativity predicts a negativity for after relative to before. There was indeed such a reversal, with before eliciting more negative brain potentials than after in sentence-initial clauses but more positive in sentence-final clauses. The results suggest that the sustained negativity indexes processing costs related to comprehending events that were mentioned out of order. [ABSTRACT FROM AUTHOR]

We have empirically assessed the distribution of published effect sizes and estimated power by analyzing 26,841 statistical records from 3,801 cognitive neuroscience and psychology papers published recently. The reported median effect size was D = 0.93 (interquartile range: 0.64–1.46) for nominally statistically significant results and D = 0.24 (0.11–0.42) for nonsignificant results. Median power to detect small, medium, and large effects was 0.12, 0.44, and 0.73, reflecting no improvement through the past half-century. This is so because sample sizes have remained small. Assuming similar true effect sizes in both disciplines, power was lower in cognitive neuroscience than in psychology. Journal impact factors negatively correlated with power. Assuming a realistic range of prior probabilities for null hypotheses, false report probability is likely to exceed 50% for the whole literature. In light of our findings, the recently reported low replication success in psychology is realistic, and worse performance may be expected for cognitive neuroscience. [ABSTRACT FROM AUTHOR]

About 80-90% of accidents are caused by the unsafe actions and behaviors of employees in construction. Behavior management thus plays a key role in enhancing safety, and particularly, behavior observation is the most critical element for modifying workers' behavior in a safe manner. However, there is a lack of practical methods to measure workers' behavior in construction. To analyze workers' actions, this paper uses an advanced and economical depth sensor to collect motion data and then investigates consequent motion-analysis techniques to detect the unsafe actions of workers, which is the main focus of this paper. First, motion data are transformed onto a three-dimensional (3D) space as a preprocess, motion classification is performed to identify a typical prior, and the selected prior is used to detect the same action in a testing data set. As a case study, motion data for unsafe actions in ladder climbing (i.e., backward-facing climbing, climbing with an object, and reaching far to a side) are collected and used to detect the actions in a new testing data set in which the actions are randomly taken. The result shows that 90.91% of unsafe actions are correctly detected in the experiment. [ABSTRACT FROM AUTHOR]

With the exponential increase in malware, homology analysis has become a hot research topic in the malware detection field. This paper proposes MHAS, a malware homology analysis system based on ensemble learning and multifeatures. MHAS generates grayscale images from malware binary files and then uses the opcode tool IDA Pro to extract opcode sequences and system call graphs. Thus, RGB images and M-images are generated on the image matrix. Then, MHAS uses convolutional neural networks (CNNs) as base learners to perform bagging ensemble learning to learn features from the grayscale images, RGB images and M-images. Next, MHAS integrates the nine base learners using voting, learning and selective ensemble (in that order) and maps the integration results to the result matrix. Finally, the result matrix is again integrated using the learning method to obtain the final malware classification result. To verify the accuracy of MHAS, we performed a malware family classification experiment, that included samples of 10 malware families. The results showed that MHAS can reach an accuracy rate of 99.17%, meaning that it can effectively analyze and identify malware families. [ABSTRACT FROM AUTHOR]

Background: Detection of pulmonary nodules is an important aspect of an automatic detection system. Incomputer-aided diagnosis (CAD) systems, the ability to detect pulmonary nodules is highly important, which plays an important role in the diagnosis and early treatment of lung cancer. Currently, the detection of pulmonary nodules depends mainly on doctor experience, which varies. This paper aims to address the challenge of pulmonary nodule detection more effectively. Methods: A method for detecting pulmonary nodules based on an improved neural network is presented in this paper. Nodules are clusters of tissue with a diameter of 3 mm to 30 mm in the pulmonary parenchyma. Because pulmonary nodules are similar to other lung structures and have a low density, false positive nodules often occur. Thus, our team proposed an improved convolutional neural network (CNN) framework to detect nodules. First, a nonsharpening mask is used to enhance the nodules in computed tomography (CT) images; then, CT images of 512×512 pixels are segmented into smaller images of 96×96 pixels. Second, in the 96×96 pixel images which contain or exclude pulmonary nodules, the plaques corresponding to positive and negative samples are segmented. Third, CT images segmented into 96×96 pixels are down-sampled to 64×64 and 32×32 size respectively. Fourth, an improved fusion neural network structure is constructed that consists of three three-dimensional convolutional neural networks, designated as CNN-1, CNN-2, and CNN-3, to detect false positive pulmonary nodules. The networks’ input sizes are 32×32×32, 64×64×64, and 96×96×96 and include 5, 7, and 9 layers, respectively. Finally, we use the AdaBoost classifier to fuse the results of CNN-1, CNN-2, and CNN-3. We call this new neural network framework the Amalgamated-Convolutional Neural Network (A-CNN) and use it to detect pulmonary nodules. Findings: Our team trained A-CNN using the LUNA16 and Ali Tianchi datasets and evaluated its performance using the LUNA16 dataset. We discarded nodules less than 5mm in diameter. When the average number of false positives per scan was 0.125 and 0.25, the sensitivity of A-CNN reached as high as 81.7% and 85.1%, respectively. [ABSTRACT FROM AUTHOR]

By utilizing cognitive mapping and leveraging georeferenced text data, this paper aims to suggest a new visualization method that combines the advantages of both conventional and state-of-the-art research techniques to depict the collective identity of place in a single image. The study addressed two research questions: (1) Can crowd-sourced text data be utilized in representing place identity? (2) Can collective place identity be expressed in the form of a cognitive map? By confirming that text data gathered from social media effectively demonstrate people’s behaviors and perceptions related to places, we propose a novel method to create a visual representation of urban identity–a “crowd-sourced cognitive map”. In particular, to improve the conventional cognitive mapping method to depict the collective identity of a city, we draw cognitive maps of Bundang and Ilsan developed in the 1990s, as well as Songdo and Dongtan developed in the 2000s, just outside of the administrative boundaries of Seoul in Korea, through a computational method based on crowd-sourced opinions collected from social media. We open the possibility for the use of social media text data to capture the identity of cities and suggest a graphical image through which people without prior information could also easily apprehend the overall image of a city. The work in this paper is expected to provide a methodological technique for appropriate decision-making and the evaluation of urban identity to shape a more unique and imageable city. [ABSTRACT FROM AUTHOR]

This paper focuses on fine-grained image retrieval based on sketches. Sketches capture detailed information, but their highly abstract nature makes visual comparisons with images more difficult. In spite of the fact that the existing models take into account the fine-grained details, they can not accurately highlight the distinctive local features and ignore the correlation between features. To solve this problem, we design a gradually focused bilinear attention model to extract detailed information more effectively. Specifically, the attention model is to accurately focus on representative local positions, and then use the weighted bilinear coding to find more discriminative feature representations. Finally, the global triplet loss function is used to avoid oversampling or undersampling. The experimental results show that the proposed method outperforms the state-of-the-art sketch-based image retrieval methods. [ABSTRACT FROM AUTHOR]

An extreme learning machine (ELM) is a novel training method for single-hidden layer feedforward neural networks (SLFNs) in which the hidden nodes are randomly assigned and fixed without iterative tuning. ELMs have earned widespread global interest due to their fast learning speed, satisfactory generalization ability and ease of implementation. In this paper, we extend this theory to hypercomplex space and attempt to simultaneously consider multisource information using a hypercomplex representation. To illustrate the performance of the proposed hypercomplex extreme learning machine (HELM), we have applied this scheme to the task of multispectral palmprint recognition. Images from different spectral bands are utilized to construct the hypercomplex space. Extensive experiments conducted on the PolyU and CASIA multispectral databases demonstrate that the HELM scheme can achieve competitive results. The source code together with datasets involved in this paper can be available for free download at . [ABSTRACT FROM AUTHOR]

Human embryonic stem cells (hESC), derived from the blastocysts, provide unique cellular models for numerous potential applications. They have great promise in the treatment of diseases such as Parkinson’s, Huntington’s, diabetes mellitus, etc. hESC are a reliable developmental model for early embryonic growth because of their ability to divide indefinitely (pluripotency), and differentiate, or functionally change, into any adult cell type. Their adaptation to toxicological studies is particularly attractive as pluripotent stem cells can be used to model various stages of prenatal development. Automated detection and classification of human embryonic stem cell in videos is of great interest among biologists for quantified analysis of various states of hESC in experimental work. Currently video annotation is done by hand, a process which is very time consuming and exhaustive. To solve this problem, this paper introduces DeephESC 2.0 an automated machine learning approach consisting of two parts: (a) Generative Multi Adversarial Networks (GMAN) for generating synthetic images of hESC, (b) a hierarchical classification system consisting of Convolution Neural Networks (CNN) and Triplet CNNs to classify phase contrast hESC images into six different classes namely: Cell clusters, Debris, Unattached cells, Attached cells, Dynamically Blebbing cells and Apoptically Blebbing cells. The approach is totally non-invasive and does not require any chemical or staining of hESC. DeephESC 2.0 is able to classify hESC images with an accuracy of 93.23% out performing state-of-the-art approaches by at least 20%. Furthermore, DeephESC 2.0 is able to generate large number of synthetic images which can be used for augmenting the dataset. Experimental results show that training DeephESC 2.0 exclusively on a large amount of synthetic images helps to improve the performance of the classifier on original images from 93.23% to 94.46%. This paper also evaluates the quality of the generated synthetic images using the Structural SIMilarity (SSIM) index, Peak Signal to Noise ratio (PSNR) and statistical p-value metrics and compares them with state-of-the-art approaches for generating synthetic images. DeephESC 2.0 saves hundreds of hours of manual labor which would otherwise be spent on manually/semi-manually annotating more and more videos. [ABSTRACT FROM AUTHOR]

Manually inspecting concrete surface defects (e.g., cracks and air pockets) is not always reliable. Also, it is labor-intensive. In order to overcome these limitations, automated inspection using image processing techniques was proposed. However, the current work can only detect defects in an image without the ability of evaluating them. This paper presents a novel approach for automatically assessing the impact of two common surface defects (i.e., air pockets and discoloration). These two defects are first located using the developed detection methods. Their attributes, such as the number of air pockets and the area of discoloration regions, are then retrieved to calculate defects’ visual impact ratios (VIRs). The appropriate threshold values for these VIRs are selected through a manual rating survey. This way, for a given concrete surface image, its quality in terms of air pockets and discoloration can be automatically measured by judging whether their VIRs are below the threshold values or not. The method presented in this paper was implemented in C++ and a database of concrete surface images was tested to validate its performance. [ABSTRACT FROM AUTHOR]

This paper describes a new method of safety assessment of highway stopping and passing sight distances. Topographic data were collected by flying a plane equipped with a light detection and ranging (LiDAR) system on a section of two-lane rural highway. The collected data were manipulated in a geographic information system (GIS) to obtain three-dimensional models of the various highway subsections. These models were visually analyzed to check for stopping and passing sight distances, thus narrowing the list of locations with potential safety issues. Subsequent line-of-sight analysis in a GIS indicated the presence of several obstructions, prompting a field visit for validation. Field inspection of the locations verified the presence of the obstructions detected during the analysis. Overall, this research indicated the viability of successful visualization of LiDAR data for highway sight distance evaluations and is indicative of LiDAR’s potential for highway safety-related applications. Comments on the resources needed to embrace this technology and future research improvements are part of the paper. [ABSTRACT FROM AUTHOR]

The process of Nuclei detection in high-grade breast cancer images is quite challenging in the case of image processing techniques due to certain heterogeneous characteristics of cancer nuclei such as enlarged and irregularly shaped nuclei, highly coarse chromatin marginalized to the nuclei periphery and visible nucleoli. Recent reviews state that existing techniques show appreciable segmentation accuracy on breast histopathology images whose nuclei are dispersed and regular in texture and shape; however, typical cancer nuclei are often clustered and have irregular texture and shape properties. This paper proposes a novel segmentation algorithm for detecting individual nuclei from Hematoxylin and Eosin (H&E) stained breast histopathology images. This detection framework estimates a nuclei saliency map using tensor voting followed by boundary extraction of the nuclei on the saliency map using a Loopy Back Propagation (LBP) algorithm on a Markov Random Field (MRF). The method was tested on both whole-slide images and frames of breast cancer histopathology images. Experimental results demonstrate high segmentation performance with efficient precision, recall and dice-coefficient rates, upon testing high-grade breast cancer images containing several thousand nuclei. In addition to the optimal performance on the highly complex images presented in this paper, this method also gave appreciable results in comparison with two recently published methods—Wienert et al. (2012) and Veta et al. (2013), which were tested using their own datasets. [ABSTRACT FROM AUTHOR]

Today there is a rapid development taking place in phenotyping of plants using non-destructive image based machine vision techniques. Machine vision based plant phenotyping ranges from single plant trait estimation to broad assessment of crop canopy for thousands of plants in the field. Plant phenotyping systems either use single imaging method or integrative approach signifying simultaneous use of some of the imaging techniques like visible red, green and blue (RGB) imaging, thermal imaging, chlorophyll fluorescence imaging (CFIM), hyperspectral imaging, 3-dimensional (3-D) imaging or high resolution volumetric imaging. This paper provides an overview of imaging techniques and their applications in the field of plant phenotyping. This paper presents a comprehensive survey on recent machine vision methods for plant trait estimation and classification. In this paper, information about publicly available datasets is provided for uniform comparison among the state-of-the-art phenotyping methods. This paper also presents future research directions related to the use of deep learning based machine vision algorithms for structural (2-D and 3-D), physiological and temporal trait estimation, and classification studies in plants.

Three-dimensional (3D) as-built geometric models are useful for many building assessment and management tasks. However, the current process of creating such models is labor-intensive. A significant amount of manual work is required to register the remote sensing data captured from multiple scans into one scene (i.e., scene registration). To automate the registration work, several research studies have been developed to automate the registration process by the detection and matching of common visual features in consecutive scans. This paper investigates the effectiveness of different combinations of common visual feature detectors and descriptors that have been widely used in the scene registration of 3D buildings. The evaluation criteria include registration accuracy and speed. The feature detectors and descriptors have been tested in a total of 31 realistic building scenarios. The results show that the combination of the scale-invariant feature transform feature detector and descriptor reached more accurate results than the others. The fastest speed is achieved by the use of an oriented binary robust independent elementary features (ORB) detector in combination with the speeded-up robust features or ORB descriptor. [ABSTRACT FROM AUTHOR]

Optical imaging techniques have been commonly used in civil engineering practice for aiding the archival of damage scenes and more recently, for image-based damage analysis. However, an evident limitation in the current practice is the lacking of real-time imaging, computing, and analytics capability for team-based visual inspection in a complex built environment. This paper explores a new computing paradigm called collaborative mobile-cloud computing (CMCC) and proposes a CMCC framework for conducting intelligent civil infrastructure condition inspection. Through software design, this framework synthesizes advanced mobile and cloud computing technologies with three innovative features: (1) context-enabled image collection, (2) interactive imaging and processing, and (3) real-time on-demand image analysis and condition analytics. Through field experiments and computational performance evaluation, this paper demonstrates the feasibility of the proposed CMCC framework, which includes verification of real-time imaging, analytics, and particularly, the mobile-cloud computational solution to two representative damage analysis problems regarding complex imagery scenes. [ABSTRACT FROM AUTHOR]

This paper presents the histological characterisation of a selection of worked bone artefacts from Middle Stone Age layers at Sibudu cave, South Africa. Histographic rendering is achieved using high-resolution Computed Tomography, which is non-destructive and facilitates three-dimensional histologic analysis. Excellent congruency in image quality was achieved with previous studies using this method. The results show that most of the artefact fragments contain mostly primary lamellar tissue, which is the bone tissue best adapted to withstand impact stresses. This indicates that bone with greater elastic properties was chosen. Histological characterisation allows the identification of animal taxa. Based on the sample analysed in this paper, Perissodactyla bone was used predominantly in the older layers at the site. Artiodactyla are represented throughout but appear far more frequently in the later (post-Howiesons Poort onwards) layers. Some of the Artiodactyla specimens have high proportions of Haversian tissue, reducing elasticity. The higher percentages of Haversian tissue in the post-Howiesons Poort artefacts relative to Holocene examples from southern Africa suggests that people may have started experimenting with bone from different animal taxa at this time and had not yet learned to eliminate the mechanically weaker secondary tissue. Apart from mechanical considerations, possible cultural constraints governing raw material selection is also explored. [ABSTRACT FROM AUTHOR]

Diabetic retinopathy (DR) is a disease which is widely diagnosed using (colour fundus) images. Efficiency and accuracy are critical in diagnosing DR as lack of timely intervention can lead to irreversible visual impairment. In this paper, we examine strategies for scrutinizing images which affect diagnostic performance of medical practitioners via an eye-tracking study. A total of 56 subjects with 0 to 18 years of experience participated in the study. Every subject was asked to detect DR from 40 images. The findings indicate that practitioners use mainly two types of strategies characterized by either higher dwell duration or longer track length. The main findings of the study are that higher dwell-based strategy led to higher average accuracy (> 85%) in diagnosis, irrespective of the expertise of practitioner; whereas, the average obtained accuracy with a long-track length-based strategy was dependent on the expertise of the practitioner. In the second part of the paper, we use the experimental findings to recommend a scanning strategy for fast and accurate diagnosis of DR that can be potentially used by image readers. This is derived by combining the eye-tracking gaze maps of medical experts in a novel manner based on a set of rules. This strategy requires scrutiny of images in a manner which is consistent with spatial preferences found in human perception in general and in the domain of fundus images in particular. The Levenshtein distance-based assessment of gaze patterns also establish the effectiveness of the derived scanning pattern and is thus recommended for image readers. [ABSTRACT FROM AUTHOR]

In this paper we investigate the changes in the functional connectivity intensity, and some related properties, in healthy people, across the life span and at resting state. For the explicit computation of the functional connectivity we exploit a recently proposed model, that bases not only on the correlations data provided by the acquisition equipment, but also on different parameters, such as the anatomical distances between nodes and their degrees. The leading purpose of the paper is to show that the proposed approach is able to recover the main aspects of resting state condition known from the available literature, as well as to suggest new insights, perspectives and speculations from a neurobiological point of view. Our study involves 133 subjects, both males and females of different ages, with no evidence of neurological diseases or systemic disorders. First, we show how the model applies to the sample, where the subjects are grouped into 28 different groups (14 of males and 14 of females), according to their age. This leads to the construction of two graphs (one for males and one for females), that can be realistically interpreted as representative of the neural network during the resting state. Second, following the idea that the brain network is better understood by focusing on specific nodes having a kind of centrality, we refine the two output graphs by introducing a new metric that favours the selection of nodes having higher degrees. As a third step, we extensively comment and discuss the obtained results. In particular, it is remarkable that, despite a great overlapping exists between the outcomes concerning males and females, some intriguing differences appear. This motivates a deeper local investigation, which represents the fourth part of the paper, carried out through a thorough statistical analysis. As a result, we are enabled to support that, for two special age groups, a few links contribute in differentiating the behaviour of males and females. In addition, we performed an average-based comparison between the proposed model and the traditional statistical correlation-based approach, then discussing and commenting the main outlined discrepancies. [ABSTRACT FROM AUTHOR]

This paper develops a new machine vision framework for efficient detection and classification of manufacturing defects in metal boxes. Previous techniques, which are based on either visual inspection or on hand-crafted features, are both inaccurate and time consuming. In this paper, we show that by using autoencoder deep neural network (DNN) architecture, we are able to not only classify manufacturing defects, but also localize them with high accuracy. Compared to traditional techniques, DNNs are able to learn, in a supervised manner, the visual features that achieve the best performance. Our experiments on a database of real images demonstrate that our approach overcomes the state-of-the-art while remaining computationally competitive. [ABSTRACT FROM AUTHOR]

In this paper the possibility of classification of X-ray images of the cervical vertebrae is studied. The images should be classified into one of the following classes—the images of healthy vertebrae and the images of vertebrae with syndesmophytes. The vertebra contours, described unambiguously by using the generalized shape language, are the basis of the analysis. As a result, the contour is represented as a chain of sinquads that determine switches. The found switches are the characteristic points of the analyzed contour. In these points additional features of the contour are determined. On the basis of these features two aforementioned classes of images are defined as fuzzy sets. Such an approach allows us to create a hierarchical algorithm of classification based on the syntactic and fuzzy description of the contour. [ABSTRACT FROM AUTHOR]

In recent years, finding the cause of pathogenesis is expected by observing the cell images. In this paper, we propose a cell particle detection method in cell images. However, there are mainly two kinds of problems in particle detection in cell image. The first is the different properties between cell images and standard images used in computer vision researches. Edges of cell particles are ambiguous, and overlaps between cell particles are often occurred in dense regions. It is difficult to detect cell particles by simple detection method using a binary classifier. The second is the ground truth made by cell biologists. The number of training samples for training a classifier is limited, and incorrect samples are included by the subjectivity of observers. From the background, we propose a cell particle detection method to address those problems. In our proposed method, we predict the center of a cell particle from the peripheral regions by convolutional neural network, and the prediction results are voted. By using the obvious peripheral edges, we can robustly detect overlapped cell particles because all edges of overlapping cell particles are not ambiguous. In addition, voting from peripheral views enables reliable detection. Moreover, our method is useful in practical applications because we can prepare many training samples from a cell particle. In experiments, we evaluate our detection methods on two kinds of cell detection datasets. One is challenging dataset for synthetic cells, and our method achieved the state-of-the-art performance. The other is real dataset of lipid droplets, and our method outperformed the conventional detector using CNN with binary outputs for particles and non-particles classification. [ABSTRACT FROM AUTHOR]

Accurate estimation of motion field in respiration-correlated 4DCT images, is a precondition for the analysis of patient-specific breathing dynamics and subsequent image-supported treatment planning. However, the lung motion estimation often suffers from the sliding motion. In this paper, a novel lung motion method based on the non-rigid registration of point clouds is proposed, and the tangent-plane distance is used to represent the distance term, which describes the difference between two point clouds. Local affine transformation model is used to express the non-rigid deformation of the lung motion. The final objective function is expressed in the Frobenius norm formation, and matrix optimization scheme is carried out to find out the optimal transformation parameters that minimize the objective function. A key advantage of our proposed method is that it alleviates the requirement that the source point cloud and the reference point cloud should be in one-to-one corresponding relationship, and the requirement is difficult to be satisfied in practical application. Furthermore, the proposed method takes the sliding motion of the lung into consideration and improves the registration accuracy by reducing the constraint of the motion along the tangent direction. Non-rigid registration experiments are carried out to validate the performance of the proposed method using popi-model data. The results demonstrate that the proposed method outperforms the traditional method with about 20% accuracy increase. [ABSTRACT FROM AUTHOR]

In palynology, the visual classification of pollen grains from different species is a hard task which is usually tackled by human operators using microscopes. Its complete automatization would save a high quantity of resources and provide valuable improvements especially for allergy-related information systems, but also for other application fields as paleoclimate reconstruction, quality control of honey based products, collection of evidences in criminal investigations or fabric dating and tracking. This paper presents three state-of-the-art deep learning classification methods applied to the recently published POLEN23E image dataset. The three methods make use of convolutional neural networks: the first one is strictly based on the idea of transfer learning, the second one is based on feature extraction and the third one represents a hybrid approach, combining transfer learning and feature extraction. The results from the three methods are indeed very good, reaching over 97% correct classification rates in images not previously seen by the models, where other authors reported around 70. [ABSTRACT FROM AUTHOR]

Glioma detection and segmentation is a challenging task for radiologists and clinicians. The research reported in this paper seeks to develop a better clinical decision support algorithm for clinicians diagnosis. This paper presents a probabilistic method for detection and segmentation between abnormal tissue regions and brain tumour (tumour core and edema) portions from Magnetic Resonance Imaging (MRI). A framework is constructed to learn structure of undirected graphical models that can represent the spatial relationships among variables and apply it to glioma segmentation. Compared with the pixel of image, the superpixel is more consistent with human visual cognition and contains less redundancy, thus, the superpixels are considered as the basic unit of structure learning and glioma segmentation scheme. ℓ1-regularization techniques are applied to learn the appropriate structure for modeling graphical models. Conditional Random Fields (CRF) are used to model the spatial interactions among image superpixel regions and their measurements. A number of features including statistics features, the combined features from the local binary pattern as well as gray level run length, curve features, and fractal features were extracted from each superpixel. The features are then passed by ℓ1-regularization to ensure a robust classification. The proposed method is compared with support vector machine and Fuzzy c-means to classify each superpixel into normal and abnormal tissue. The proposed system is tested for the presence of low grade as well as high grade glioma tumors on images collected from BRATS2013, BRATS2015 data set and Henan Provincial People’s Hospital (HNPPH) data set. The experiments performed provides similarity between segmented and truth image up to 91.5% by correlation method. [ABSTRACT FROM AUTHOR]