Search

Implantable electrodes have been utilized for decades to stimulate, sense, or monitor a broad range of biological processes, with examples ranging from glucose monitoring devices to cochlear implants. While the underlying science related to the application of electrodes is a mature field, preclinical and clinical studies have demonstrated that there are still significant challenges in vivo associated with a lack of control over tissue-material interfacial interactions, especially over longer time frames. Herein we discuss the current challenges and opportunities for implantable electrodes and the associated bioelectronic interfaces across the clinical landscape with a focus on emerging technologies and the obstacles of biofouling, microbial colonization, and the foreign body response. Overcoming these challenges is predicted to open the door for a new generation of implantable medical devices and significant associated clinical impact. STATEMENT OF SIGNIFICANCE: Implantable electrodes have been utilised for decades to stimulate, sense, or monitor a broad range of biological processes, with examples ranging from glucose monitoring devices to cochlear implants. Next-generation bioelectronic implantable medical devices promise an explosion of new applications that have until this point in time been impossible to achieve. However, there are several persistent biological challenges hindering the realisation of these new applications. We present a clinical perspective on how these biological challenges have shaped the device market and clinical trial landscape. Specifically, we present statistical breakdowns of current device applications and discuss biofouling, the foreign body response, and microbial colonisation as the main factors that need to be addressed before a new generation of devices can be explored., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Scaffolds for bone defect treatment should ideally support vascularization and promote bone formation, to facilitate the translation into biomedical device applications. This study presents a novel approach utilizing 3D-printed water-dissolvable polyvinyl alcohol (PVA) sacrificial molds to engineer polymerized High Internal Phase Emulsion (polyHIPE) scaffolds with microchannels and distinct multiscale porosity. Two sacrificial mold variants (250 µm and 500 µm) were generated using fused deposition modeling, filled with HIPE, and subsequently dissolved to create polyHIPE scaffolds containing microchannels. In vitro assessments demonstrated significant enhancement in cell infiltration, proliferation, and osteogenic differentiation, underscoring the favorable impact of microchannels on cell behavior. High loading efficiency and controlled release of the osteogenic factor BMP-2 were achieved, with microchannels facilitating release of the growth factor. Evaluation in a mouse critical-size calvarial defect model revealed enhanced vascularization and bone formation in microchanneled scaffolds containing BMP-2. This study not only introduces an accessible method for creating multiscale porosity in polyHIPE scaffolds but also emphasizes its capability to enhance cellular infiltration, controlled growth factor release, and in vivo performance. The findings suggest promising applications in bone tissue engineering and regenerative medicine, and are expected to facilitate the translation of this type of biomaterial scaffold. STATEMENT OF SIGNIFICANCE: This study holds significance in the realm of biomaterial scaffold design for bone tissue engineering and regeneration. We demonstrate a novel method to introduce controlled multiscale porosity and microchannels into polyHIPE scaffolds, by utilizing 3D-printed water-dissolvable PVA molds. The strategy offers new possibilities for improving cellular infiltration, achieving controlled release of growth factors, and enhancing vascularization and bone formation outcomes. This microchannel approach not only marks a substantial stride in scaffold design but also demonstrates its tangible impact on enhancing osteogenic cell differentiation and fostering robust bone formation in vivo. The findings emphasize the potential of this methodology for bone regeneration applications, showcasing an interesting advancement in the quest for effective and innovative biomaterial scaffolds to regenerate bone defects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The role of frequently touched surfaces in the transmission of infectious diseases is well-documented, and the urgent need for effective surface technologies with antipathogen activity has been highlighted by the recent global pandemic and rise in antimicrobial resistance. Here, we have explored combinations of up to 3 different classes of compounds within a polymeric matrix to enable the fabrication of coatings with broad-spectrum activity. Compounds were either based on metals or metal oxides, namely, copper, silver, and copper oxide, essential oils, namely, cinnamaldehyde, tea tree oil, and carvacrol oil, or cationic polymers, namely, poly(ε-lysine) and poly(hexamethylene biguanide). These compounds were mixed into a polymer matrix, coated, and dried to yield durable coatings. Coatings containing up to 7.5% (w/w) of the compounds were assessed in the zone of inhibition and biofilm assays using Staphylococcus aureus and Pseudomonas aeruginosa , as well as infectivity assays using human coronavirus OC43. Our data demonstrate that a selected combination of additives was able to provide a 5-log reduction in the colony-forming units of both bacteria and a 4-log reduction in viral infectivity. This simple but highly effective technology is expected to find applications in environments such as hospitals, aged care facilities, or public transport., Competing Interests: The authors declare the following competing financial interest(s): The authors declare the following competing interest: Vishek Batra, Ghian Tjandaputra and Tony Tan have a financial interest in Coatd Pty Ltd, which is seeking to commercialize anti-pathogen surface technologies., (© 2024 The Authors. Published by American Chemical Society.)

Surface coating technology is broadly demanded across various fields, including marine and biomedical materials; therefore, a facile and versatile approach is desired. This study proposed an attractive surface coating strategy using photo-crosslinkable benzophenone (BP) moiety for biomaterials application. BP-containing "bioglue" polymer can effectively crosslink with all kinds of surfaces and biomolecules. Upon exposure to ultraviolet (UV) light, free radical reaction from the BP glue facilitates the immobilization of diverse molecules onto different substrates in a straightforward and user-friendly manner. Through either one-step, mixing the bioglue with targeted biomolecules, or two-step methods, pre-coating the bioglue and then adding targeted biomolecules, polyacrylic acid (PAA), cyclic RGD-containing peptides, and proteins (gelatin, collagen, and fibronectin) were successfully immobilized on substrates. After drying the bioglue, targeted biomolecules can still be immobilized on the surfaces preserving their bioactivity. Cell culture on biomolecule-immobilized surfaces using NIH 3T3 fibroblasts and human bone marrow stem cells (hBMSCs) showed significant improvement of cell adhesion and activity compared to the unmodified control in serum-free media after 24 hours. Furthermore, hBMSCs on the fibronectin-immobilized surface showed an increased calcium deposition after 21 days of osteogenic differentiation, suggesting that the immobilized fibronectin is highly bioactive. Given the straightforward protocol and substrate-independent bioglue, the proposed coating strategy is promising in broad-range fields., Competing Interests: The authors declare no competing interests., (This journal is © The Royal Society of Chemistry.)

Microfluidic technology is applied across various research areas including organ-on-chip (OOC) systems. The main material used for microfluidics is polydimethylsiloxane (PDMS), a silicone elastomer material that is biocompatible, transparent, and easy to use for OOC systems with well-defined microstructures. However, PDMS-based OOC systems can absorb hydrophobic and small molecules, making it difficult and erroneous to make quantitative analytical assessments for such compounds. In this paper, we explore the use of a synthetic fluoropolymer, poly(4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole- co -tetrafluoroethylene) (Teflon™ AF 2400), with excellent "non-stick" properties to functionalize OOC systems. Cannabinoids, including cannabidiol (CBD), are classes of hydrophobic compounds with a great potential for the treatment of anxiety, depression, pain, and cancer. By using CBD as a testing compound, we examined and systematically quantified CBD absorption into PDMS by means of an LC-MS/MS analysis. In comparison to the unmodified PDMS microchannels, an increase of approximately 30× in the CBD signal was detected with the fluoropolymer surface modification after 3 h of static incubation. Under perfusion conditions, we observed an increase of nearly 15× in the CBD signals from the surface-modified microchannels than from the unmodified microchannels. Furthermore, we also demonstrated that fluoropolymer-modified microchannels are compatible for culturing hCMEC/D3 endothelial cells and for CBD perfusion experiments.

Objectives: Driveline infections are a major complication of ventricular assist device (VAD) therapy. A newly introduced Carbothane driveline has preliminarily demonstrated anti-infective potential against driveline infections. This study aimed to comprehensively assess the anti-biofilm capability of the Carbothane driveline and explore its physicochemical characteristics., Methods: We assessed the Carbothane driveline against biofilm formation of leading microorganisms causing VAD driveline infections, including Staphylococcus aureus , Staphylococcus epidermidis , Pseudomonas aeruginosa and Candida albicans , using novel in vitro biofilm assays mimicking different infection micro-environments. The importance of physicochemical properties of the Carbothane driveline in microorganism-device interactions were analyzed, particularly focusing on the surface chemistry. The role of micro-gaps in driveline tunnels on biofilm migration was also examined., Results: All organisms were able to attach to the smooth and velour sections of the Carbothane driveline. Early microbial adherence, at least for S. aureus and S. epidermidis , did not proceed to the formation of mature biofilms in a drip-flow biofilm reactor mimicking the driveline exit site environment. The presence of a driveline tunnel however, promoted staphylococcal biofilm formation on the Carbothane driveline. Physicochemical analysis of the Carbothane driveline revealed surface characteristics that may have contributed to its anti-biofilm activity, such as the aliphatic nature of its surface. The presence of micro-gaps in the tunnel facilitated biofilm migration of the studied bacterial species., Conclusion: This study provides experimental evidence to support the anti-biofilm activity of the Carbothane driveline and uncovered specific physicochemical features that may explain its ability to inhibit biofilm formation., Competing Interests: Dr. Yue Qu, Prof. David McGiffin, Dr. Helmut Thissen, and Prof. Anton Peleg received a Medtronic External Research Program that financially supported this study. Medtronic played no direct role in the design of the study, interpretation of the results, and writing-up the manuscript. Prof. David McGiffin is a proctor for Abbott-implantation of HeartMate III ventricular assist device., (© 2023 The Authors.)

Injectable hydrogels have been employed extensively as versatile materials for cartilage regeneration due to their excellent biocompatibility, tunable structure, and ability to accommodate bioactive factors, as well as their ability to be locally delivered via minimally invasive injection to fill irregular defects. More recently, in vitro and in vivo studies have revealed that processing these materials to produce cell-laden microgels can enhance cell-cell and cell-matrix interactions and boost nutrient and metabolite exchange. Moreover, these studies have demonstrated gene expression profiles and matrix regeneration that are superior compared to conventional injectable bulk hydrogels. As cell-laden microgels and their application in cartilage repair are moving closer to clinical translation, this review aims to present an overview of the recent developments in this field. Here we focus on the currently used biomaterials and crosslinking strategies, the innovative fabrication techniques being used for the production of microgels, the cell sources used, the signals used for induction of chondrogenic differentiation and the resultant biological responses, and the ability to create three-dimensional, functional cartilage tissues. In addition, this review also covers the current clinical approaches for repairing cartilage as well as specific challenges faced when attempting the regeneration of damaged cartilage tissue. New findings related to the macroporous nature of the structures formed by the assembled microgel building blocks and the novel use of microgels in 3D printing for cartilage tissue engineering are also highlighted. Finally, we outline the challenges and future opportunities for employing cell-laden microgels in clinical applications., (Crown Copyright © 2021. Published by Elsevier Ltd. All rights reserved.)

Antimicrobial resistance (AMR) is threatening modern medicine. While the primary cost of AMR is paid in the healthcare domain, the agricultural and environmental domains are also reservoirs of resistant microorganisms and hence perpetual sources of AMR infections in humans. Consequently, the World Health Organisation and other international agencies are calling for surveillance of AMR in all three domains to guide intervention and risk reduction strategies. Technologies for detecting AMR that have been developed for healthcare settings are not immediately transferable to environmental and agricultural settings, and limited dialogue between the domains has hampered opportunities for cross-fertilisation to develop modified or new technologies. In this feature, we discuss the limitations of currently available AMR sensing technologies used in the clinic for sensing in other environments, and what is required to overcome these limitations.

Despite the wide use of aliphatic polyesters, such as poly(L-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL), for many biomedical applications, these materials are limited due to their hydrophobic properties and lack of functional groups to bond with ligands to enhance the cell reorganization. Recently, a composite consisting of bioglass and PCL was demonstrated to enhance the mechanical strength and to improve the degradation rate. Although numerous approaches have been developed to improve the wettability of aliphatic polyesters to create a favorable interface with cells, only few surface modification methods can be independently applied to surfaces with different material. In this work, mesoporous bioglass (MBG) nanoparticles embedded in PCL films were modified by the polymerization of aminomalonitrile (AMN) with 3,4,5-trihydroxybenzaldehyde (THBA). The copolymer layer was further utilized as a mediator to conjugate chitosan and evaluate the antibacterial efficacy. Our results show that the hydrophilicity of the composite membranes significantly improved after treatment. In addition, after immersion in simulated body fluid (SBF) for 14 days, hydroxyapatite formation was only observed on the treated membranes. This result demonstrates that the surface treatment did not alter the MBG bioactivity. Moreover, the cell culture results reveal that the extension level of cells and expression of alkaline phosphatase activity (ALP) of osteoblast-like (MG63) cells were higher on treated composite films compared to untreated ones. The results imply that the treatment procedure can be simultaneously and homogeneously applied to the organic/inorganic composites. In addition, Staphylococcus aureus adhesion on AMN-co-THBA and chitosan/ AMN-co-THBA was significantly lower than untreated PCL. Moreover, the percentage of dead bacteria was highest on the chitosan/ AMN-co-THBA membranes. These results indicate that the AMN-co-THBA modification can be used in composite materials and complex constructs, and it provides a potential method to create versatile surface properties for biomedical applications., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Cells are able to perceive complex mechanical cues from their microenvironment, which in turn influences their development. Although the understanding of these intricate mechanotransductive signals is evolving, the precise roles of substrate microtopography in directing cell fate is still poorly understood. Here, UV nanoimprint lithography is used to generate micropillar arrays ranging from 1 to 10 µm in height, width, and spacing to investigate the impact of microtopography on mechanotransduction. Using mesenchymal stem cells (MSCs) as a model, stark pattern-specific changes in nuclear architecture, lamin A/C accumulation, chromatin positioning, and DNA methyltransferase expression, are demonstrated. MSC osteogenesis is also enhanced specifically on micropillars with 5 µm width/spacing and 5 µm height. Intriguingly, the highest degree of osteogenesis correlates with patterns that stimulated maximal nuclear deformation which is shown to be dependent on myosin-II-generated tension. The outcomes determine new insights into nuclear mechanotransduction by demonstrating that force transmission across the nuclear envelope can be modulated by substrate topography, and that this can alter chromatin organisation and impact upon cell fate. These findings have potential to inform the development of microstructured cell culture substrates that can direct cell mechanotransduction and fate for therapeutic applications in both research and clinical sectors., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

Antifouling treatment is critical to certain biomedical devices for their functions and patients' life. Facial, versatile, and universal coating methods to conjugate antifouling materials on a wide variety of biomaterials are beneficial for the fabrication of low-fouling biomedical devices. We developed a simple one-step coating method for surface conjugation of zwitterionic poly(sulfobetaine) via deposition of self-polymerized pyrogallol (PG). Poly(pyrogallol) could deposit copolymers of sulfobetaine methacrylate and aminoethyl methacrylate (pSBAE) on various biomaterials. pSBAE coatings inhibited as high as 99.8% of the adhesion of L929 cells and reduced protein adsorption significantly. The resistance against L929 cell adhesion was increased with increasing coating time and was positively correlated with the surface hydrophilicity and film thickness. Such a coating was robust to resist harsh sterilization conditions and stable for long-term storage in phosphate-buffered saline. We expect that the simple low-fouling pSBAE coating is applicable to the manufacture of medical devices., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Understanding the interactions of stem cells with surface topography can give us an invaluable tool in controlling stemness and fate of stem cells for further use in biomedical applications. In this study, we have fabricated topographical features using a class of cell culture substrates called binary colloidal crystals (BCCs), that are made by self-assembly of mixtures of spherical micron sized silica (Si) and nanometer sized polystyrene (PS) or poly (methyl methacrylate) (PMMA) particles. The substrates formed are arrays of ordered, hexagonally packed large Si particles inter-dispersed with the PS particles that are stabilized by gentle heating, which melts the PS or PMMA forming substrates suitable for cell culture. BCC substrates were used for culture of mouse embryonic stem cells (mESCs). Compared to tissue culture plates, COM1 (Si5-PMMA0.4), COM2 (Si5-PS0.4) and COM4 (Si2-PSC0.22) have shown to provide a better support for mESC proliferation in the presence of the cytokine leukemia inhibitory factor (LIF). The behavior of mESCs with the BCCs in presence and absence of LIF, was further explored and it was found that interaction of mESCs with the culture substrate can be controlled by tuning surface topography and roughness, which is determined by the size and type of particles used in making BCCs. Furthermore, it was shown that limiting cell-surface interactions and controlling colony shape can promote stemness maintenance on COM1 and COM2 substrates as indicated by better proliferation and higher expression of pluripotency genes including Nanog both in presence and in absence of LIF. Together with higher expression of GATA6 gene, it can be stated that these surfaces can be used for endodermic priming of mESCs. Therefore, we believe that these surfaces, especially COM1 and COM2 surfaces can be beneficial as stem cell culture systems for further use in biomedical research., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Most gelatin hydrogels used in regenerative medicine applications today are fabricated by photocrosslinking due to the convenience and speed of this method. However, in most cases photoinitiators are used, which require UV light, which, in turn, can cause cell and tissue damage, or using functionalized gelatin. Recently, ruthenium (II) tris-bipyridyl chloride has been studied as an initiator that can induce dityrosine bond formation using visible light. In addition, continuous fibrils and small particles are often used to reinforce composite materials. Therefore, this study investigated the visible-light-induced photocrosslinking of native gelatin molecules via dityrosine bonds formation as well as gel reinforcement by collagen fibrils and mesoporous bioactive glass (MBG) particles. The results show that collagen and MBG exerted a synergistic effect on maintaining gel integrity with a dental LED curing light when the irradiation time was shortened to 30 s. Without the two reinforcing components, the gel could not form a geometric shape stable gel even when the exposure time was 120 s. The shear strength increased by 62% with the collagen and MBG compared with the blank control. Furthermore, our results demonstrate that the addition of collagen and MBG enhanced gel stability in an artificial saliva solution. These results demonstrate the considerable advantages of using tyrosine-containing biomolecules, and using a dental LED curing light for the crosslinking of hydrogels in terms of their suitability and feasibility for use as bioadhesives in confined clinical working space, such as the oral cavity, and in application as in situ-crosslinked injectable hydrogels.

Staphylococcus capitis is an opportunistic pathogen often implicated in bloodstream infections in the neonatal intensive care unit (NICU). This is assisted by its ability to form biofilms on indwelling central venous catheters (CVC), which are highly resistant to antibiotics and the immune system. We sought to understand the fundamentals of biofilm formation by S. capitis in the NICU, using seventeen clinical isolates including the endemic NRCS-A clone and assessing nine commercial and two modified polystyrene surfaces. S. capitis clinical isolates from the NICU initiated biofilm formation only in response to hyperosmotic conditions, followed by a developmental progression driven by icaADBC expression to establish mature biofilms, with polysaccharide being their major extracellular polymer substance (EPS) matrix component. Physicochemical features of the biomaterial surface, and in particular the level of the element oxygen present on the surface, significantly influenced biofilm development of S. capitis . A lack of highly oxidized carbon species on the surface prevented the immobilization of S. capitis EPS and the formation of mature biofilms. This information provides guidance in regard to the preparation of hyperosmolar total parenteral nutrition and the engineering of CVC surfaces that can minimize the risk of catheter-related bloodstream infections caused by S. capitis in the NICU., (Copyright © 2020 Qu, Li, Cameron, Easton, Zhu, Zhu, Salwiczek, Muir, Thissen, Daley, Forsythe, Peleg and Lithgow.)

Ventilator-associated pneumonia (VAP) is a highly common hospital-acquired infection affecting people that require mechanical ventilation. The endotracheal tube (ETT) used during the ventilation process provides a surface that can allow bacterial colonization and biofilm formation, which can lead to VAP. Although various approaches, including ETT design and material selection, as well as antimicrobial coatings have been employed to minimize adverse events, VAP remains a significant unresolved clinical issue. In this study, we have utilized a novel styrylbenzene-based antimicrobial (BCP3) in a simple and robust coating that allows its long-term release at an effective level. BCP3 was applied onto PVC ETT segments blended together with poly(lactic- co -glycolic acid) via a facile dip-coating process with controlled loadings. In vitro studies demonstrated concentration-dependent release of BCP3 from the coatings for at least 31 days. Bacterial assays using major VAP culprits, Staphylococcus aureus and Pseudomonas aeruginosa, demonstrated significant growth inhibition, with a stronger effect on S. aureus . Despite its ability to inhibit bacterial growth, BCP3 showed no cytotoxicity toward mammalian (L929) fibroblasts, which makes it attractive from a clinical perspective. The coating procedure was successfully translated to coat the entire ETTs, making it highly amenable for large-scale manufacturing., Competing Interests: The authors declare the following competing financial interest(s): The research described in the manuscript was supported by Boulos & Cooper Pharmaceuticals, which seeks to commercialize a range of novel antimicrobial compounds.The authors declare that Ramiz A. Boulos is a founder of Boulos & Cooper Pharmaceuticals., (Copyright © 2020 American Chemical Society.)

Hypothesis: Titanium and titanium alloys are often the most popular choice of material for the manufacture of medical implants; however, they remain susceptible to the risk of device-related infection caused by the presence of pathogenic bacteria. Hydrothermal etching of titanium surfaces, to produce random nanosheet topologies, has shown remarkable ability to inactivate pathogenic bacteria via a physical mechanism. We expect that systematic tuning of the nanosheet morphology by controlling fabrication parameters, such as etching time, will allow for optimisation of the surface pattern for superior antibacterial efficacy., Experiments: Using time-dependent hydrothermal processing of bulk titanium, we fabricated bactericidal nanosheets with variable nanoedge morphologies according to a function of etching time. A systematic study was performed to compare the bactericidal efficiency of nanostructured titanium surfaces produced at 0.5, 1, 2, 3, 4, 5, 6, 24 and 60 h of hydrothermal etching., Findings: Titanium surfaces hydrothermally treated for a period of 6 h were found to achieve maximal antibacterial efficiency of 99 ± 3% against Gram-negative Pseudomonas aeruginosa and 90 ± 9% against Gram-positive Staphylococcus aureus bacteria, two common human pathogens. These surfaces exhibited nanosheets with sharp edges of approximately 10 nm. The nanotopographies presented in this work exhibit the most efficient mechano-bactericidal activity against both Gram-negative and Gram-positive bacteria of any nanostructured titanium topography reported thus far., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Objectives: Driveline infections remain an important complication of ventricular assist device therapy, with biofilm formation being a major contributor. This study aimed to elucidate factors that govern biofilm formation and migration on clinically relevant ventricular assist device drivelines., Methods: Experimental analyses were performed on HeartWare HVAD (HeartWare International Inc, Framingham, Mass) drivelines to assess surface chemistry and biofilm formation. To mimic the driveline exit site, a drip-flow biofilm reactor assay was used. To mimic a subcutaneous tissue environment, a tunnel-based interstitial biofilm assay was developed. Clinical HVAD drivelines explanted at the time of cardiac transplantation were also examined by scanning electron microscopy., Results: Common causative pathogens of driveline infections were able to adhere to the smooth and velour sections of the HVAD driveline and formed robust biofilms in the drip-flow biofilm reactor; however, Pseudomonas aeruginosa and Candida albicans had greater biomass. Biofilm migration within the interstitial driveline tunnel was evident for Staphylococcus epidermidis, Staphylococcus aureus, and C albicans, but not P aeruginosa. Biofilm formation by staphylococci was 500 to 10,000 times higher in the tunnel-based model compared with our exit site model. The 3-dimensional structure of the driveline velour and the use of silicone adhesive in driveline manufacturing were found to promote biofilm growth, and explanted patient drivelines demonstrated inadequate tissue in-growth along the entire velour with micro-gaps between velour fibers., Conclusions: This work highlights the predilection of pathogens to different parts of the driveline, the importance of the subcutaneous tunnel to biofilm formation and migration, and the presence of micro-gaps in clinical drivelines that could facilitate invasive driveline infections., (Copyright © 2019 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.)

Porous silicon (pSi) nanomaterials are increasingly attractive for biomedical applications due to their promising properties such as simple and feasible fabrication procedures, tunable morphology, versatile surface modification routes, biocompatibility and biodegradability. This review focuses on recent advances in surface modification of pSi for controlled drug delivery applications. A range of functionalization strategies and fabrication methods for pSi-polymer hybrids are summarized. Surface engineering solutions such as stimuli-responsive polymer grafting, stealth coatings and active targeting modifications are highlighted as examples to demonstrate what can be achieved. Finally, the current status of engineered pSi nanomaterials for in vivo applications is reviewed and future prospects and challenges in drug-delivery applications are discussed.

Astrochemistry and astrobiology, the fascinating disciplines that strive to unravel the origin of life, have opened unprecedented and unpredicted vistas into exotic compounds as well as extreme or complex reaction conditions of potential relevance for a broad variety of applications. Representative, and so far little explored sources of inspiration include complex organic systems, such as polycyclic aromatic hydrocarbons (PAHs) and their derivatives; hydrogen cyanide (HCN) and formamide (HCONH 2 ) oligomers and polymers, like aminomalononitrile (AMN)-derived species; and exotic processes, such as solid-state photoreactions on mineral surfaces, phosphorylation by minerals, cold ice irradiation and proton bombardment, and thermal transformations in fumaroles. In addition, meteorites and minerals like forsterite, which dominate dust chemistry in the interstellar medium, may open new avenues for the discovery of innovative catalytic processes and unconventional methodologies. The aim of this review was to offer concise and inspiring, rather than comprehensive, examples of astrochemistry-related materials and systems that may be of relevance in areas such as surface functionalization, nanostructures, and hybrid material design, and for innovative technological solutions. The potential of computational methods to predict new properties from spectroscopic data and to assess plausible reaction pathways on both kinetic and thermodynamic grounds has also been highlighted.

Biomaterials that have been newly implanted inside the body are the substratum targets for a "race for the surface", in which bacterial cells compete against eukaryotic cells for the opportunity to colonize the surface. A victory by the former often results in biomaterial-associated infections, which can be a serious threat to patient health and can undermine the function and performance of the implant. Moreover, bacteria can often have a 'head start' if implant contamination has taken place either prior to or during the surgery. Current prevention and treatment strategies often rely on systemic antibiotic therapies, which are becoming increasingly ineffective due to a growing prevalence of antibiotic-resistant bacteria. Nanostructured surfaces that kill bacteria by physically rupturing bacterial cells upon contact have recently emerged as a promising solution for the mitigation of bacterial colonization of implants. Furthermore, these nanoscale features have been shown to enhance the adhesion and proliferation of eukaryotic cells, which is a key to, for example, the successful osseointegration of load-bearing titanium implants. The bactericidal activity and biocompatibility of such nanostructured surfaces are often, however, examined separately, and it is not clear to what extent bacterial cell-surface interactions would affect the subsequent outcomes of host-cell attachment and osseointegration processes. In this study, we investigated the ability of bactericidal nanostructured titanium surfaces to support the attachment and growth of osteoblast-like MG-63 human osteosarcoma cells, despite them having been pre-infected with pathogenic bacteria. MG-63 is a commonly used osteoblastic model to study bone cell viability, adhesion, and proliferation on the surfaces of load-bearing biomaterials, such as titanium. The nanostructured titanium surfaces used here were observed to kill the pathogenic bacteria, whilst simultaneously enhancing the growth of MG-63 cells in vitro when compared to that occurring on sterile, flat titanium surfaces. These results provide further evidence in support of nanostructured bactericidal surfaces being used as a strategy to help eukaryotic cells win the "race for the surface" against bacterial cells on implant materials.

A new and facile approach to selectively functionalize the internal and external surfaces of porous silicon (pSi) for drug delivery applications is reported. To provide a surface that is suitable for sustained drug release of the hydrophobic cancer chemotherapy drug camptothecin (CPT), the internal surfaces of pSi films were first modified with 1-dodecene. To further modify the external surface of the pSi samples, an interlayer was applied by silanization with (3-aminopropyl)triethoxysilane (APTES) following air plasma treatment. In addition, copolymers of N-(2-hydroxypropyl) acrylamide (HPAm) and N-benzophenone acrylamide (BPAm) were grafted onto the external pSi surfaces by spin-coating and UV crosslinking. Each modification step was verified using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, water contact angle (WCA) measurements, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). In order to confirm that the air plasma treatment and silanization step only occurred on the top surface of pSi samples, confocal microscopy was employed after fluorescein isothiocyanate (FITC) conjugation. Drug release studies carried out over 17 h in PBS demonstrated that the modified pSi reservoirs released CPT continuously, while showing excellent stability. Furthermore, protein adsorption and cell attachment studies demonstrated the ability of the graft polymer layer to reduce both significantly. In combination with the biocompatible pSi substrate material, the facile modification strategy described in this study provides access to new multifunctional drug delivery systems (DDS) for applications in cancer therapy.

The organization of matter into hierarchical structures is a fundamental characteristic of functional materials and living organisms. Binary colloidal crystal (BCC) systems present a diversified range of nanotopographic structures where large and small colloidal particles simultaneously self-assemble into either 2D monolayer or 3D hierarchical crystal lattices. More importantly, understanding how BCCs form opens up the possibility to fabricate more complex systems such as ternary or quaternary colloidal crystals. Monolayer BCCs can also offer the possibility to achieve surface micro- and nano-topographies with heterogeneous chemistries, which can be challenging to achieve with other traditional fabrication tools. A number of fabrication methods have been reported that enable generation of BCC structures offering high accuracy in growth with controllable stoichiometries; however, it is still a challenge to make uniform BCC structures over large surface areas. Therefore, fully understand the mechanism of binary colloidal self-assembly is crucial and new/combinational methods are needed. In this review, we summarize the recent advances in BCC fabrication using particles made of different materials, shapes, and dispersion medium. Depending on the potential application, the degree of order and efficiency of crystal formation has to be determined in order to induce variability in the intended lattice structures. The mechanisms involved in the formation of highly ordered lattice structures from binary colloidal suspensions and applications are discussed. The generation of BCCs can be controlled by manipulation of their extensive phase behavior, which facilitates a wide range potential applications in the fields of both material and biointerfacial sciences including photonics, biosensors, chromatography, antifouling surfaces, biomedical devices, and cell culture tools., (Copyright © 2018. Published by Elsevier B.V.)

Extracellular deoxyribonucleic acid (eDNA) exists in biological environments such as those around medical implants since prokaryotic or eukaryotic cells can undergo processes such as autolysis, necrosis, and apoptosis. For bacteria, eDNA has been shown to be involved in biofilm formation and gene transfer and acts as a nutrient source. In terms of biofilm formation, eDNA in solution has been shown to be very important in increasing attachment; however, very little is known about the role played by surface immobilized eDNA in initiating bacterial attachment and whether the nature of a DNA layer (physically adsorbed or covalently attached, and molecular weight) influences biofilm formation. In this study, the authors shed light on the role that surface attached DNA plays in the early biofilm formation by using Si wafers (Si) and allylamine plasma polymer (AAMpp) coated Si wafers to adsorb and covalently immobilize salmon sperm DNA of three different molecular weights. Pseudomonas aeruginosa was chosen to study the bacterial interactions with these DNA functionalized surfaces. Characterization of surface chemistry and imaging of attached bacteria were performed via x-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and epi-fluorescence microscopy. XPS results confirmed the successful grafting of DNA on the AAMpp and Si surfaces, and surprisingly the results showed that the surface attached DNA actually reduced initial bacterial attachment, which was contrary to the initial hypothesis. This adds speculation about the specific role played by DNA in the dynamics of how it influences biofilm formation, with the possibility that it could actually be used to make bacterial resistant surfaces.