Search

Animal guts contain numerous microbes, which are critical for nutrient assimilation and pathogen defence. While corals and other Cnidaria lack a true differentiated gut, they possess semi-enclosed gastrovascular cavities (GVCs), where vital processes such as digestion, reproduction and symbiotic exchanges take place. The microbiome harboured in GVCs is therefore likely key to holobiont fitness, but remains severely understudied due to challenges of working in these small compartments. Here, we developed minimally invasive methodologies to sample the GVC of coral polyps and characterise the microbial communities harboured within. We used glass capillaries, low dead volume microneedles, or nylon microswabs to sample the gastrovascular microbiome of individual polyps from six species of corals, then applied low-input DNA extraction to characterise the microbial communities from these microliter volume samples. Microsensor measurements of GVCs revealed anoxic or hypoxic micro-niches, which persist even under prolonged illumination with saturating irradiance. These niches harboured microbial communities enriched in putatively microaerophilic or facultatively anaerobic taxa, such as Epsilonproteobacteria. Some core taxa found in the GVC of Lobophyllia hemprichii from the Great Barrier Reef were also detected in conspecific colonies held in aquaria, indicating that these associations are unlikely to be transient. Our findings suggest that the coral GVC is chemically and microbiologically similar to the gut of higher Metazoa. Given the importance of gut microbiomes in mediating animal health, harnessing the coral "gut microbiome" may foster novel active interventions aimed at increasing the resilience of coral reefs to the climate crisis. [ABSTRACT FROM AUTHOR]

The development of ISE-based sensors for the analysis of nitrates in liquid phase is described in this work. Focusing on the tetradodecylammonium nitrate (TDDAN) ion exchanger as well as on fluoropolysiloxane (FPSX) polymer-based layers, electrodeposited matrixes containing double-walled carbon nanotubes (DWCNTs), embedded in either polyethylenedioxythiophene (PEDOT) or polypyrrole (PPy) polymers, ensured improved ion-to-electron transducing layers for NO3− detection. Thus, FPSX-based pNO3-ElecCell microsensors exhibited good detection properties (sensitivity up to 55 mV/pX for NO3 values ranging from 1 to 5) and acceptable selectivity in the presence of the main interferent anions (Cl−, HCO3−, and SO42−). Focusing on the temporal drift bottleneck, mixed results were obtained. On the one hand, relatively stable measurements and low temporal drifts (~1.5 mV/day) were evidenced on several days. On the other hand, the pNO3 sensor properties were degraded in the long term, being finally characterized by high response times, low detection sensitivities, and important measurement instabilities. These phenomena were related to the formation of some thin water-based layers at the polymer–metal interface, as well as the physicochemical properties of the TDDAN ion exchanger in the FPSX matrix. However, the improvements obtained thanks to DWCNT-based ion-to-electron transducing layers pave the way for the long-term analysis of NO3− ions in real water-based solutions. [ABSTRACT FROM AUTHOR]

The data‐driven machine learning technology used for neural decoding emphasizes the requirements of in vivo and in vitro neural signal acquisition with high spatial and temporal resolution. However, micro‐electrode arrays (MEAs) that simultaneously achieve high spatial and temporal resolution neural signal acquisition are not yet available. Meanwhile, the high data bandwidth of large‐scale MEA brings challenges in power consumption, data transmission, storage, and neural signal processing. This research aims to improve the spatial and temporal resolution of MEA, reduce the cost and time of large‐scale MEA customization through cascading, and reduce the bandwidth of large‐scale MEA through spike compression. Firstly, based on in‐pixel spike detection, a row‐based neural spike readout mechanism and related array circuit to improve the neural spike readout performance and temporal resolution of neural signal acquisition is proposed. To further enhance the spatial resolution and reduce the risk of large‐scale MEA fabrication, the cascading capability of the readout circuit is explored. Lastly, spatial correlation‐based neural spike encoding is proposed to reduce the data bandwidth, achieving a 5.2× compression rate. This is a study on implementing large‐scale MEA through cascaded readout circuits and novel study to utilize the spatial correlation between detected neural spikes for further compression. [ABSTRACT FROM AUTHOR]

Background: Limited research has investigated the association between training load and performance of basketball players during games. Little is known about how different indicators of player performance are affected by internal and external loads. The purpose of this study was to determine whether external and internal loads influence basketball players' performance during games. Method: This longitudinal study involved 20 professional male basketball players from a single team, classified as first-level athletes by the Chinese Basketball Association. During 34 games, external load was measured as PlayerLoad using micro-sensors, while internal load was assessed using session rating of perceived exertion (sRPE). Player performance was quantified using three metrics: Efficiency, Player Index Rating (PIR), and Plus-Minus (PM). Pearson correlation coefficients were calculated to assess the strength of the relationships between training loads and performance metrics. Linear mixed-effects models were applied to further analyze the influence of internal and external loads on basketball performance. Results: Pearson correlation analysis revealed moderate positive correlations between both sRPE and PlayerLoad with Efficiency and PIR. Specifically, sRPE (r = 0.52) and PlayerLoad (r = 0.54) were both significantly correlated with Efficiency. For PIR, sRPE (r = 0.50) and PlayerLoad (r = 0.56) also demonstrated moderate correlations. These correlations were further substantiated by linear mixed-effects models, which showed that sRPE (β = 2.21, p < 0.001) and PlayerLoad (β = 1.87, p = 0.004) had significant independent effects on Efficiency. Similarly, sRPE (β = 2.15, p < 0.001) and PlayerLoad (β = 2.36, p < 0.001) significantly predicted PIR. Additionally, a significant interaction effect between PlayerLoad and sRPE was found on Plus-Minus (β = -2.49, p < 0.001), indicating that the combination of high physical and psychological loads negatively impacted overall team performance. However, the correlation strengths for Plus-Minus were relatively low (sRPE: r = 0.16; PlayerLoad: r = 0.10). Conclusion: Both external and internal loads positively contribute to performance, the integration of objective (accelerometry) and subjective (sRPE) measures of load provides a comprehensive understanding of the physiological and psychological demands on athletes, contributing to more effective training regimens and performance optimization. [ABSTRACT FROM AUTHOR]

Droplet transmission is the primary infection route for respiratory diseases like COVID‐19 and influenza, but small and low‐cost wearable droplet detection devices are a significant challenge. Herein, a respiratory droplet micro‐sensor based on graphene oxide quantum dots (GOQDs) assembled onto SiO2 microspheres by the nebulized natural deposition is presented. Benefiting from the energy dissipation of the microsphere to droplets, the sensor can detect droplets as far as 2 m from coughing. With this sensor, droplet signal variations caused by some factors like distance, speech, angles, and wind directions are explored, and the effectiveness of different protective measures in preventing droplet transmission is evaluated. This droplet detection technology is expected to be utilized for the development of personal detection and protection devices against infectious respiratory diseases. [ABSTRACT FROM AUTHOR]

Interdigital electrodes were prepared using nanoimprint lithography and piezoelectric inkjet printing. These processes are simpler and more cost‐effective than the industrially used electron beam lithography because of their purely mechanical process step. For the investigation of material dependence, platinum as well as carbon electrodes were fabricated. Afterwards electrodes with various line widths and spacings were tested for the application as a chemiresistive sensor for ferrocenyl‐methanol and the influence of the gap‐width and conductor cross‐section on the sensitivity was investigated. The general suitability of the systems for the production of such structures could be confirmed. Structures with a limit of detection (LOD) down to 1.2 μM and 35.9 μM could be produced for carbon and platinum, respectively, as well as a response time of 3.6 s was achieved. [ABSTRACT FROM AUTHOR]

The tumor microenvironment is increasingly acknowledged as a critical contributor to cancer progression, mediating genetic and epigenetic alterations. Beyond diverse cellular interactions from the microenvironment, physicochemical factors such as tumor acidosis also significantly affect cancer dynamics. Recent research has highlighted that tumor acidosis facilitates invasion, immune escape, metastasis, and resistance to therapies. Thus, noninvasive measurement of tumor acidity and the development of targeted interventions represent promising strategies in oncology. Techniques like contrast-enhanced ultrasound (CEUS) can effectively assess blood perfusion, while ultrasound-stimulated microbubble cavitation (USMC) has proven to enhance tumor blood perfusion. We therefore aimed to determine whether CEUS assesses tumor acidity and whether USMC treatment can modulate tumor acidity. Firstly, we tracked CEUS perfusion parameters in MCF7 tumor models and compared them with in vivo tumor pH recorded by pH microsensors. We found that the peak intensity and area under curve of tumor contrast-enhanced ultrasound correlated well with tumor pH. We further conducted USMC treatment on MCF7 tumor-bearing mice, tracked changes of tumor blood perfusion and tumor pH in different perfusion regions before and after the USMC treatment to assess its impact on tumor acidity and optimize therapeutic ultrasound pressure. We discovered that USMC with 1.0 Mpa significantly improved tumor blood perfusion and tumor pH. Furthermore, tumor vascular pathology and PGI2 assays indicated that improved tumor perfusion was mainly due to vasodilation rather than angiogenesis. More importantly, analysis of glycolysis-related metabolites and enzymes demonstrated USMC treatment can reduce tumor acidity by reducing tumor glycolysis. These findings support that CEUS may serve as a potential biomarker to assess tumor acidity and USMC is a promising therapeutic modality for reducing tumor acidosis. [ABSTRACT FROM AUTHOR]

Summary: Woody plants display some photosynthetic activity in stems, but the biological role of stem photosynthesis and the specific contributions of bark and wood to carbon uptake and oxygen evolution remain poorly understood.We aimed to elucidate the functional characteristics of chloroplasts in stems of different ages in Fraxinus ornus. Our investigation employed diverse experimental approaches, including microsensor technology to assess oxygen production rates in whole stem, bark, and wood separately. Additionally, we utilized fluorescence lifetime imaging microscopy (FLIM) to characterize the relative abundance of photosystems I and II (PSI : PSII chlorophyll ratio) in bark and wood.Our findings revealed light‐induced increases in O2 production in whole stem, bark, and wood. We present the radial profile of O2 production in F. ornus stems, demonstrating the capability of stem chloroplasts to perform light‐dependent electron transport. Younger stems exhibited higher light‐induced O2 production and dark respiration rates than older ones.While bark emerged as the primary contributor to net O2 production under light conditions, our data underscored that wood chloroplasts are also photosynthetically active. The FLIM analysis unveiled a lower PSI abundance in wood than in bark, suggesting stem chloroplasts are not only active but also acclimate to the spectral composition of light reaching inner compartments. [ABSTRACT FROM AUTHOR]

Miniaturized silicon thermal probes for plant's sap flow measurement, or micro sap flow sensors, have advantages in minimum invasiveness, low power consumption, and fast responses. Practical applications in sap flow measurement has been demonstrated with the single-probe silicon micro sensors. However, the sensors could not detect flow directions and require estimating zero sap flow output that leads to significant source of uncertainty. Furthermore, silicon-needles would break easily during the insertion into plants. We present the first three-element micro thermal sap flow sensor packaged on a durable printed circuit board needle that can measure bidirectional flows with improved dynamics and precision. The performance of the newly designed calorimetric flow sensor was confirmed through precision calibration and field test on tomato stems. A calibration curve for a tomato stem was obtained with a sensitivity of 0.299 K/(µL mm−2 s−1) under the maximum temperature increase of 4.61 K. Results from the field test for one month revealed a correlation between the measured sap flux density and related conditions such as solar radiation, vapor pressure deficit, sunshade and irrigation. The developed sensor will contribute to practical long-term sap flow monitoring for small and delicate plants with minimal physical invasion. [ABSTRACT FROM AUTHOR]

The levels of the MMPs in the biological samples of confirmed patients with gastric cancer are significantly elevated compared to those found in healthy people. Therefore, a novel 3D stochastic microsensor based on graphene oxide, modified with gold nanoparticles and (Z)-N-(pyridin-4-yl-methyl) octadec-9-enamide (namely N2-AuNP/GO), was designed for the determination of MMP-2 in biological samples, and validated for the screening tests of biological samples in order to be used for the early diagnosis of gastric cancer. The proposed sensor presents a low limit of quantification (1.00 × 10−22 g mL−1), high sensitivity (1.84 × 107 s−1 g−1 mL), and a wide working concentration range (1.00 × 10−22–1.00 × 10−7 g mL−1). Recovery values higher than 99.15% were recorded for the assay of MMP-2 in whole blood, gastric tissue tumors, saliva, and urine samples. [ABSTRACT FROM AUTHOR]

Metal-oxide-based gas sensors are extensively utilized across various domains due to their cost-effectiveness, facile fabrication, and compatibility with microelectronic technologies. The copper (Cu)-based multifunctional polymer-enhanced sensor (CuMPES) represents a notably tailored design for non-invasive environmental monitoring, particularly for detecting diverse gases with a low concentration. In this investigation, the Cu-CuO/PEDOT nanocomposite was synthesized via a straightforward chemical oxidation and vapor-phase polymerization. Comprehensive characterizations employing X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and micro Raman elucidated the composition, morphology, and crystal structure of this nanocomposite. Gas-sensing assessments of this CuMPES based on Cu-CuO/PEDOT revealed that the response current of the microneedle-type CuMPES surpassed that of the pure Cu microsensor by nearly threefold. The electrical conductivity and surface reactivity are enhanced by poly (3,4-ethylenedioxythiophene) (PEDOT) polymerized on the CuO-coated surface, resulting in an enhanced sensor performance with an ultra-fast response/recovery of 0.3/0.5 s. [ABSTRACT FROM AUTHOR]

Micro-LEDs (μLEDs) have advantages in terms of brightness, power consumption, and response speed. In addition, they can also be used as micro-sensors implanted in the body via flexible electronic skin. One of the key techniques involved in the fabrication of μLED-based devices is transfer printing. Although numerous methods have been proposed for transfer printing, improving the yield of μLED arrays is still a formidable task. In this paper, we propose a novel method for improving the yield of μLED arrays transferred by the stamping method, using an innovative design of piezoelectrically driven asymmetric micro-gripper. Traditional grippers are too large to manipulate μLEDs, and therefore two micro-sized cantilevers are added at the gripper tips. A μLED manipulation system is constructed based on the micro-gripper together with a three-dimensional positioning system. Experimental results using this system show that it can be used successfully to manipulate μLED arrays. ARTICLE HIGHLIGHTS: HIGHLIGHTS • A piezoelectrically driven asymmetric micro-gripper is proposed. • A μLED manipulation system is constructed based on the micro-gripper together with a three-dimensional positioning system. • A single μLED array is manipulated by the proposed micro-gripper-based system. [ABSTRACT FROM AUTHOR]

Heart disease is one of the leading causes of death in the United States and throughout the world. While there are different techniques for reducing or preventing the impact of heart disease, nitric oxide (NO) is administered as nitroglycerin for reversing angina or chest pain. Unfortunately, due to its gaseous and short-lived half-life, NO can be difficult to study or even administer. Therefore, controlled delivery of NO is desirable for therapeutic use. In the current study, the goal was to fabricate NO-releasing microspheres (MSs) using a donor molecule, S-Nitroso-N-Acetyl penicillamine, (SNAP), and encapsulating it in poly(ε-caprolactone) (PCL) using a single-emulsion technique that can provide sustained delivery of NO to cells over time without posing any toxicity risks. Optimization of the fabrication process was performed by varying the duration of homogenization (5, 10, and 20 min) and its effect on entrapment efficiency and size. The optimized SNAP-MS had an entrapment efficiency of ˃50%. Furthermore, we developed a modified method for NO detection by using NO microsensors to detect the NO release from SNAP-MSs in real time, showing sustained release behavior. The fabricated SNAP-MSs were tested for biocompatibility with HUVECs (human umbilical vein endothelial cells), which were found to be biocompatible. Lastly, we tested the effect of controlled NO delivery to human induced pluripotent stem-derived cardiomyocytes (hiPSC-CMs) via SNAP-MSs, which showed a significant improvement in the electrophysiological parameters and alleviated anoxic stress. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive study focusing on the detection and characterization of droplets with volumes in the nanoliter range. Leveraging the precise control of minute liquid volumes, we introduced a novel spectroscopic on-chip microsensor equipped with integrated microfluidic channels for droplet generation, characterization, and sensing simultaneously. The microsensor, designed with interdigitated ring-shaped electrodes (IRSE) and seamlessly integrated with microfluidic channels, offers enhanced capacitance and impedance signal amplitudes, reproducibility, and reliability in droplet analysis. We were able to make analyses of droplet length in the range of 1.0–6.0 mm, velocity of 0.66–2.51 mm/s, and volume of 1.07 nL–113.46 nL. Experimental results demonstrated that the microsensor's performance is great in terms of droplet size, velocity, and length, with a significant signal amplitude of capacitance and impedance and real-time detection capabilities, thereby highlighting its potential for facilitating microcapsule reactions and enabling on-site real-time detection for chemical and biosensor analyses on-chip. This droplet-based microfluidics platform has great potential to be directly employed to promote advances in biomedical research, pharmaceuticals, drug discovery, food engineering, flow chemistry, and cosmetics. [ABSTRACT FROM AUTHOR]

Abstract The data‐driven machine learning technology used for neural decoding emphasizes the requirements of in vivo and in vitro neural signal acquisition with high spatial and temporal resolution. However, micro‐electrode arrays (MEAs) that simultaneously achieve high spatial and temporal resolution neural signal acquisition are not yet available. Meanwhile, the high data bandwidth of large‐scale MEA brings challenges in power consumption, data transmission, storage, and neural signal processing. This research aims to improve the spatial and temporal resolution of MEA, reduce the cost and time of large‐scale MEA customization through cascading, and reduce the bandwidth of large‐scale MEA through spike compression. Firstly, based on in‐pixel spike detection, a row‐based neural spike readout mechanism and related array circuit to improve the neural spike readout performance and temporal resolution of neural signal acquisition is proposed. To further enhance the spatial resolution and reduce the risk of large‐scale MEA fabrication, the cascading capability of the readout circuit is explored. Lastly, spatial correlation‐based neural spike encoding is proposed to reduce the data bandwidth, achieving a 5.2× compression rate. This is a study on implementing large‐scale MEA through cascaded readout circuits and novel study to utilize the spatial correlation between detected neural spikes for further compression.

This article describes the design, calibration, and testing of new calorimetric microsensors for the measurement of wall shear stress in low-speed aerodynamic flows. The sensors are made of three beams of platinum-plated silicon nitride suspended over a small cavity. Their range of operation and their bandwidth are of the order of ± 10 Pa and 1 kHz, respectively. Results from experimental campaigns in a laminar separation bubble, a turbulent separation bubble, and on a NACA 0015 airfoil at low Reynolds number indicate a high sensitivity and an inherent capacity to measure instantaneous backflow. This demonstrates the capability of the new sensors to accurately determine the mean and fluctuating wall shear stress in laminar, transitional, and turbulent separating and reattaching flows. [ABSTRACT FROM AUTHOR]

This document is an editorial from the journal Applied Sciences, discussing the advancements and applications of sensor technologies in the field of marine engineering. It highlights various examples of sensor technologies being used in marine environments, such as wireless sensor networks for real-time monitoring, optical-fiber-based sensors for measuring seawater salinity, and piezoelectric sensors for determining ocean wave height. The editorial also provides an overview of nine research papers included in a special issue of the journal, covering topics such as energy-harvesting solutions, engine monitoring systems, and hydrocarbon exploration. The document emphasizes the transformative impact of sensor technologies in enhancing safety, efficiency, and sustainability in the maritime industry, and suggests that future research will continue to explore novel sensors and measurement systems to meet evolving needs. [Extracted from the article]

Improving measurement accuracy is the core issue with surface acoustic wave (SAW) micro-force sensors. An electrode transducer can stimulate not only the SAW but also the bulk acoustic wave (BAW). A portion of the BAW can be picked up by the receiving transducer, leading to an unwanted or spurious signal. This can harm the device's frequency response characteristics, thereby potentially reducing the precision of the micro-force sensor's measurements. This paper examines the influence of anisotropy on wave propagation, and it also performs a phase-matching analysis between interdigital transducers (IDTs) and bulk waves. Two solutions are shown to reduce the influence of BAW for SAW micro sensors, which are arranged with acoustic absorbers at the ends of the substrate and in grooving in the piezoelectric substrate. Three different types of sensors were manufactured, and the test results showed that the sidelobes of the SAW micro-force sensor could be effectively inhibited (3.32 dB), thereby enhancing the sensitivity and performance of sensor detection. The SAW micro-force sensor manufactured using the new process was tested and the following results were obtained: the center frequency was 59.83 MHz, the fractional bandwidth was 1.33%, the range was 0–1000 mN, the linearity was 1.02%, the hysteresis was 0.59%, the repeatability was 1.11%, and the accuracy was 1.34%. [ABSTRACT FROM AUTHOR]

Selective sensing of trace hydrogen gas is highly desirable in leak detection applications, and it has recently come to the fore to an even larger degree due to the great potential of hydrogen in the current energy transition. One difficulty of room-temperature hydrogen sensing in an open environment is the potential interference from multiple other analytes, including water vapor, especially in high-humidity environments. To develop a high-responsivity, selective hydrogen gas sensor, ultrathin palladium nanosheets (PdNS) were synthesized using a hydrothermal method. Then, the PdNS were utilized as the chemical recognition layers in gravimetric resonant gas sensors for the real-time detection of hydrogen at room temperature. The nanoscale structure of the PdNS provides the material with a high amount of functional surface area; in turn, this allowed for significant surface-analyte interactions and high-performance sensing. Importantly, the PdNS active layer can selectively sense hydrogen gas in the presence of multiple interfering gases (e.g., acetone, alcohols, and water vapor) in the concentration range of 1–5% in both nitrogen and air environments. Therefore, this sensor system may potentially be of interest for future industrial applications regarding the safe handling of hydrogen gas. [ABSTRACT FROM AUTHOR]

The current research is an attempt to analyze on-site selenium(IV) ions in environmental water samples using an eco-friendly miniaturized sensor developed by deposition of a very thin amount of metallic bismuth in a solid Bi electrode tightly closed in miniaturized housing. Numerous experimental variables are optimized, including the composition of the supporting electrolyte and its pH, as well as activation and accumulation conditions. Under optimized measurement conditions, the method shows high sensitivity, permitting a very low limit of detection equal to 7 × 10−10 mol L−1 to be achieved in a short accumulation time of 50 s. The performance of this microsensor was investigated against numerous interference factors and its good anti-interference capability was demonstrated. A series of voltammetric experiments by differential pulse cathodic stripping voltammetry (DPCSV) were carried out and they proved that the miniaturized sensor is characterized by very good accuracy and precision as well as long-term stability. The solid bismuth microelectrode displays a good voltammetric response in the analysis of diverse samples with a complex matrix and demonstrates a good recovery rate. [ABSTRACT FROM AUTHOR]

In this paper, a composite pressure-sensitive mechanism combining diaphragm bending and volume compression was developed for resonant pressure microsensors to achieve high-pressure measurements with excellent accuracy. The composite mechanism was explained, and the sensor structure was designed based on theoretical analysis and finite element simulation. An all-silicon resonant high-pressure microsensor with multiple miniaturized cavities and dual resonators was developed, where dual resonators positioned in two resonant cavities with suitably different widths are used to perform opposite characteristics in pressure and the same characteristics at different temperatures, which can improve pressure sensitivities and realize temperature self-compensation by differential frequency output. The microsensor was fabricated by microfabrication, and the experimental results showed that the sensor had an accuracy of ±0.015% full scale (FS) in a pressure range of 0.1~100 MPa and a temperature range of −10~50 °C. The pressure sensitivity of the differential frequency was 261.10 Hz/MPa (~2523 ppm/MPa) at a temperature of 20 °C, and the temperature sensitivities of the dual resonators were −1.54 Hz/°C (~−14.5 ppm/°C) and −1.57 Hz/°C (~−15.6 ppm/°C) at a pressure of 2 MPa. The differential output had an outstanding stability within ±0.02 Hz under constant temperature and pressure. Thus, this research provides a convenient solution for high-pressure measurements because of its advantages, namely, large range, excellent accuracy and stability. [ABSTRACT FROM AUTHOR]

The main goal of this study was to evaluate the concentration and release dynamics of molecular hydrogen (H2, dihydrogen) in dietary evaluate supplements and identify products that provide a biologically significant amount of dihydrogen suitable for human consumption. We examined ten commercial supplements marketed for their dihydrogen content, including slow-release capsules and tablets (4 products), effervescent powders and tablets (5 products), and canned ready-to-drink beverage (1 product). These products were acquired either through online purchases, from retail stores, or obtained free of charge directly from the manufacturers upon request. Dihydrogen concentration was measured using a highly sensitive Clark-type hydrogen microsensor with a detection limit 0.05 µmol·L-1. Out of the ten products examined, only three (30.0%) exhibited dihydrogen levels surpassing the levels marketed as biologically relevant (500 µmol·L-1), and one of these products (a canned ready-to-drink beverage) approached this level with a concentration of 439.2 µmol·L-1. Interestingly, all slow-release capsules yielded negligible amounts of hydrogen (< 2 µmol·L-1), while a slow-release tablet delivered 43.6 µmol·L-1 of dihydrogen per single dose. The substantial variance in dihydrogen content among the assessed supplements holds significant implications for the general public, as high-potency products have the potential to provide up to 7 000 times more dihydrogen per single dosage compared to their low-potency counterparts. [ABSTRACT FROM AUTHOR]

For microelectronic devices, the on‐chip microsupercapacitors with facile construction and high performance, are attracting researchers' prior consideration due to their high compatibility with modern microsystems. Herein, we proposed interchanging interdigital Au‐/MnO2/polyethylene dioxythiophene stacked microsupercapacitor based on a microfabrication process followed by successive electrochemical deposition. The stacked configuration of two pseudocapacitive active microelectrodes meritoriously leads to an enhanced contact area between MnO2 and the conductive and electroactive layer of polyethylene dioxythiophene, hence providing excellent electron transport and diffusion pathways of electrolyte ions, resulting in increased pseudocapacitance of MnO2 and polyethylene dioxythiophene. The stacked quasi‐solid‐state microsupercapacitors delivered the maximum specific capacitance of 43 mF cm−2 (211.9 F cm−3), an energy density of 3.8 μWh cm−2 (at a voltage window of 0.8 V) and 5.1 μWh cm−2 (at a voltage window of 1.0 V) with excellent rate capability (96.6% at 2 mA cm−2) and cycling performance of 85.3% retention of initial capacitance after 10 000 consecutive cycles at a current density of 5 mA cm−2, higher than those of ever reported polyethylene dioxythiophene and MnO2‐based planar microsupercapacitors. Benefiting from the favorable morphology, bilayer microsupercapacitor is utilized as a flexible humidity sensor with a response/relaxation time superior to those of some commercially available integrated microsensors. This strategy will be of significance in developing high‐performance on‐chip integrated microsupercapacitors/microsensors at low cost and environment‐friendly routes. [ABSTRACT FROM AUTHOR]

In order to enhance the sensitivity of wafer-level vacuum-packaged electric field sensors, this paper proposed a vertical-resonant MEMS electric field sensor based on TGV (Through Glass Via) technology. The microsensor is composed of the electric field sensing cover, the drive cover, and the SOI-based microstructures between them. TGV technology is innovatively used to fabricate the electric field sensing cover and the vertically-driven cover. The external electric field is concentrated and transmitted to the area below the silicon plate in the center of the electric field sensing cover through a metal plate and a metal pillar, reducing the coupling capacitance between the silicon plate and the packaging structure, thereby achieving the enhanced transmission of the electric field. The sensitivity-enhanced mechanism of the sensor is analyzed, and the key parameters of the sensor are optimized through finite element simulation. The fabrication process is designed and realized. A prototype is tested to characterize its performance. The experimental results indicate that the sensitivity of the sensor is 0.82 mV/(kV/m) within the electrostatic electric field ranging from 0–50 kV/m. The linearity of the sensor is 0.65%. [ABSTRACT FROM AUTHOR]

Coral reefs, the largest bioconstruction on Earth, are formed by calcium carbonate skeletons of corals. Coral skeleton formation commonly referred to as calcification occurs in a specific compartment, the extracellular calcifying medium (ECM), located between the aboral ectoderm and the skeleton. Calcification models often assume a direct link between the surrounding seawater and the ECM. However, the ECM is separated from the seawater by several tissue layers and the cœlenteron, which contains the cœlenteric fluid found in both polyps and cœnosarc (tissue connecting the polyps). Symbiotic dinoflagellate-containing cells line the cœlenteron and their photosynthetic activity contributes to changes in the chemistry of the cœlenteric fluid, particularly with respect to pH. The aim of our study is to compare cœlenteron pH between the cœnosarc and polyps and to compare areas of high or low dinoflagellate density based on tissue coloration. To achieve this, we use liquid ion exchange (LIX) pH microsensors to profile pH in the cœlenteron of polyps and the cœnosarc in different regions of the coral colony in light and darkness. We interpret our results in terms of what light and dark exposure means for proton gradients between the ECM and the coelenteron, and how this could affect calcification. A microsensor study on a reef coral suggests that the photosynthetic activity of symbiotic dinoflagellates, lining the cœlenteron, contributes to changes in the cœlenteric fluid chemistry in response to light and spatial variability. [ABSTRACT FROM AUTHOR]

Laser direct writing is a promising technology for flexible electronics, microsensors, and microfluidic chips. In this study, we propose a low-cost micro and nano lithography process using near-field laser direct writing. Our platform achieves a high print resolution of 3.96 µm for photosensitive resin, which is better than that of common commercial 3D printing devices. We adjust the laser power and scanning speed to precisely control the print resolution from 3.96 µm to 55.94 µm. The lithography system demonstrates repeatability and stability in repeated experiments, and wide format printing (20×20 mm) shows its ability to print across scales. Our approach employs an inexpensive photohead picker OPU, which costs less than ten dollars, to meet the demand for smallvolume, low-cost, multi-scale micro and nano device manufacturing. [ABSTRACT FROM AUTHOR]

Measuring the distribution and dynamics of H2 in microbial electrochemical reactors is valuable to gain insights into the processes behind novel bioelectrochemical technologies, such as microbial electrosynthesis. Here, a microsensor method to measure and profile dissolved H2 concentrations in standard H-cell reactors is described. Graphite cathodes were oriented horizontally to enable the use of a motorized microprofiling system and a stereomicroscope was used to place the H2 microsensor precisely on the cathode surface. Profiling was performed towards the gas-liquid interface, while preserving the electric connections and flushing the headspace (to maintain anoxic conditions) and under strict temperature control (to overcome the temperature sensitivity of the microsensors). This method was tested by profiling six reactors, with and without inoculation of the acetogen Sporomusa ovata, at three different time points. H2 accumulated over time in the abiotic controls, while S. ovata maintained low H2 concentrations throughout the liquid phase (< 4 μM) during the whole experimental period. These results demonstrate that this setup generated insightful H2 profiles. However, various limitations of this microsensor method were identified, as headspace flushing lowered the dissolved H2 concentrations over time. Moreover, microsensors can likely not accurately measure H2 in the immediate vicinity of the solid cathode, because the solids cathode surface obstructs H2 diffusion into the microsensor. Finally, the reactors had to be discarded after microsensor profiling. Interested users should bear these considerations in mind when applying microsensors to characterize microbial electrochemical reactors. [ABSTRACT FROM AUTHOR]

Neurotransmitter analysis plays a pivotal role in diagnosing and managing neurodegenerative diseases, often characterized by disturbances in neurotransmitter systems. However, prevailing methods for quantifying neurotransmitters involve invasive procedures or require bulky imaging equipment, therefore restricting accessibility and posing potential risks to patients. The innovation of compact, in vivo instruments for neurotransmission analysis holds the potential to reshape disease management. This innovation can facilitate non-invasive and uninterrupted monitoring of neurotransmitter levels and their activity. Recent strides in microfabrication have led to the emergence of diminutive instruments that also find applicability in in vitro investigations. By harnessing the synergistic potential of microfluidics, micro-optics, and microelectronics, this nascent realm of research holds substantial promise. This review offers an overarching view of the current neurotransmitter sensing techniques, the advances towards in vitro microsensors tailored for monitoring neurotransmission, and the state-of-the-art fabrication techniques that can be used to fabricate those microsensors. [ABSTRACT FROM AUTHOR]

The squeeze‐film damping (SQFD) is an important dissipation mechanism of Micro‐Electro‐Mechanical Systems resonators. The current SQFD models of perforated plates treat borders of plate and holes as the constant pressure boundary, without considering border effect. In this paper, the border effect on SQFD is studied by expanding simulation area. At the same time, based on the research of non‐perforated plate border effect, the calculation size of the perforated plate hole cell is modified, and the modified SQFD model of the perforated plate has been built. Compared with simulation results, it shows the border effect has a great influence on SQFD of perforated plate. The precision of the modified model is higher than that of recent models. For a rectangular plate, the maximum error of the modified model is 12%, while for the recent model it is 40%. For a circular plate, the modified model is 38%, while the recent model is 58%. [ABSTRACT FROM AUTHOR]

Environmental factors, such as pressure and temperature, are known to contribute to the formation of ulcers that seriously affect bedridden individuals. Researchers have proposed several technologies to achieve the long-term monitoring of those parameters, usually relying on sensing mats, which poses difficulties in correlating the measurements with specific parts of the body. In this work, we aim to develop microsensors to be integrated into patient clothing. They should be highly flexible, thin with a small footprint, and can be achieved by taking advantage of the microfabrication on polyimide (PI) thin-film substrates (total device thicknesses below 30 µm). Both resistive and capacitance transduction mechanisms were explored, targeting operation ranges of 1 to 40 kPa and 24 to 42 °C. The sensors were integrated into textiles using silicone elastomers and electrical connections based on conductive silver yarn. The experimental characterization showed a nominal capacitance of 21 pF, a sensitivity of −8.44 fF/kPa for the pressure sensors, and a 0.0021 Ω/Ω°C sensitivity of the temperature sensor (with resistance of 29 kΩ at 22 °C). The proposed approach can potentially be implemented not only in wearable devices but also in many other applications for health monitoring or human–machine interfaces. [ABSTRACT FROM AUTHOR]

Highlights: The materials, fabrication methods, implantation technologies, and applications of implantable electrochemical microsensors for animals were summarized. The implantable electrochemical microsensors for monitoring diseases and exploring disease mechanisms were discussed. The current status, ongoing challenges, and future development prospects of implantable electrochemical microsensors in monitoring animal physiological information were highlighted. In vivo monitoring of animal physiological information plays a crucial role in promptly alerting humans to potential diseases in animals and aiding in the exploration of mechanisms underlying human diseases. Currently, implantable electrochemical microsensors have emerged as a prominent area of research. These microsensors not only fulfill the technical requirements for monitoring animal physiological information but also offer an ideal platform for integration. They have been extensively studied for their ability to monitor animal physiological information in a minimally invasive manner, characterized by their bloodless, painless features, and exceptional performance. The development of implantable electrochemical microsensors for in vivo monitoring of animal physiological information has witnessed significant scientific and technological advancements through dedicated efforts. This review commenced with a comprehensive discussion of the construction of microsensors, including the materials utilized and the methods employed for fabrication. Following this, we proceeded to explore the various implantation technologies employed for electrochemical microsensors. In addition, a comprehensive overview was provided of the various applications of implantable electrochemical microsensors, specifically in the monitoring of diseases and the investigation of disease mechanisms. Lastly, a concise conclusion was conducted on the recent advancements and significant obstacles pertaining to the practical implementation of implantable electrochemical microsensors. [ABSTRACT FROM AUTHOR]

Transparent piezoelectric thin films on glass are sought after in piezoelectric microdevices. Here we report the fabrication of highly transparent (%T ≥ 70.0) Pb(Zr0.52Ti0.48)O3[PZT] thin films on indium tin oxide (ITO)-coated glass substrate. The effective transverse piezoelectric coefficient, e31,f, determined from both direct and converse piezoelectric effects for the PZT/ITO/glass unimorphs were 3.8 and 9.3 C m−2, respectively. Dielectric permittivity, ε r and dielectric loss, tan δ were 870 and 0.06, respectively. The high optical transparency and transverse piezoelectric coefficient obtained for the PZT/ITO/glass heterostructure suggest that they have good application potential in transparent piezoelectric thin film devices. [ABSTRACT FROM AUTHOR]

Indole-3-acetic acid (IAA) and salicylic acid (SA), as critical plant hormones, are involved in multiple physiological regulatory processes of plants. Simultaneous and continuous in vivo detection of IAA and SA will help clarify the mechanisms of their regulation and crosstalk. First, this study reports the development and application of an electrochemical microsensor for simultaneous and continuous in vivo detection of IAA and SA. This electrochemical microsensor system consisted of a tip (length, 2 mm) of platinum wire (diameter, 0.1 mm) modified with carbon cement and multi-walled carbon nanotubes, an untreated tip (length, 2 mm) of platinum wire (diameter, 0.1 mm), as well as a tip (length, 2 mm) of Ag/AgCl wire (diameter, 0.1 mm). It was capable of detecting IAA in the level ranging from 0.1 to 30 µM and SA ranging from 0.1 to 50 µM based on the differential pulse voltammetry or amperometric i-t., respectively. The dynamics of IAA and SA levels in tomato leaf veins under high salinity stress were continuously detected in vivo, and very little damage occurred. Compared to conventional detection methods, the constructed microsensor is not only suitable for continuously detecting IAA and SA in microscopic plant tissue in vivo, it also reduces the damage done to plants during the detection. More importantly, the continuous and dynamic changes in IAA and SA data obtained in stiu through this system not only can help clarify the interaction mechanisms of IAA and SA in plants, it also helps to evaluate the health status of plants, which will promote the development of basic research in botany and precision agriculture. [ABSTRACT FROM AUTHOR]

As multi-object spectrographs (MOSs) continue to evolve, a notable trend has emerged—the increasing accommodation of fiber positioners on ever-more compact focal planes. This progression has seen the traditional stepper motors being supplanted by more space-efficient miniature hollow-cup motors. A significant challenge faced in the employment of these 4 mm diameter motors is the absence of compatible angle sensors, resulting in reliance on open-loop control methods for positioning. Addressing this challenge, this paper introduces a novel miniature angle sensor designed specifically for 4 mm hollow-cup motors, and presents a newly formulated closed-loop control scheme, which leverages this sensor to achieve accurate positioning. This marks the first implementation of an angle closed-loop control system within a 4 mm miniature hollow-cup motor used in MOS fiber positioners. Experimental evidence suggests that this sensored closed-loop mode substantially improves upon the energy efficiency and precision of fiber positioner placement, compared with traditional open-loop stepper control methods. Furthermore, the integration of these microsensors mitigates collision risks during the concurrent operation of fiber positioners by deactivating the motor power supply to prevent potential damage to the system. [ABSTRACT FROM AUTHOR]

Abstract Background Technologies for quick and label-free diagnosis of malignancies from breast tissues have the potential to be a significant adjunct to routine diagnostics. The biophysical phenotypes of breast tissues, such as its electrical, thermal, and mechanical properties (ETM), have the potential to serve as novel markers to differentiate between normal, benign, and malignant tissue. Results We report a system-of-biochips (SoB) integrated into a semi-automated mechatronic system that can characterize breast biopsy tissues using electro-thermo-mechanical sensing. The SoB, fabricated on silicon using microfabrication techniques, can measure the electrical impedance (Z), thermal conductivity (K), mechanical stiffness (k), and viscoelastic stress relaxation (%R) of the samples. The key sensing elements of the biochips include interdigitated electrodes, resistance temperature detectors, microheaters, and a micromachined diaphragm with piezoresistive bridges. Multi-modal ETM measurements performed on formalin-fixed tumour and adjacent normal breast biopsy samples from N = 14 subjects were able to differentiate between invasive ductal carcinoma (malignant), fibroadenoma (benign), and adjacent normal (healthy) tissues with a root mean square error of 0.2419 using a Gaussian process classifier. Carcinoma tissues were observed to have the highest mean impedance (110018.8 ± 20293.8 Ω) and stiffness (0.076 ± 0.009 kNm−1) and the lowest thermal conductivity (0.189 ± 0.019 Wm−1 K−1) amongst the three groups, while the fibroadenoma samples had the highest percentage relaxation in normalized load (47.8 ± 5.12%). Conclusions The work presents a novel strategy to characterize the multi-modal biophysical phenotype of breast biopsy tissues to aid in cancer diagnosis from small-sized tumour samples. The methodology envisions to supplement the existing technology gap in the analysis of breast tissue samples in the pathology laboratories to aid the diagnostic workflow.

Abstract The squeeze‐film damping (SQFD) is an important dissipation mechanism of Micro‐Electro‐Mechanical Systems resonators. The current SQFD models of perforated plates treat borders of plate and holes as the constant pressure boundary, without considering border effect. In this paper, the border effect on SQFD is studied by expanding simulation area. At the same time, based on the research of non‐perforated plate border effect, the calculation size of the perforated plate hole cell is modified, and the modified SQFD model of the perforated plate has been built. Compared with simulation results, it shows the border effect has a great influence on SQFD of perforated plate. The precision of the modified model is higher than that of recent models. For a rectangular plate, the maximum error of the modified model is 12%, while for the recent model it is 40%. For a circular plate, the modified model is 38%, while the recent model is 58%.

Adsorption combustion-type gas microsensors utilizing γ-Al2O3 co-loaded with m wt% noble metal and 10 wt% metal oxide [mN/10MO/γ-Al2O3, N: noble metal (Pd or Pt), MO: metal oxide (CeO2 or Bi2O3)] were fabricated, and their sensor-signal profiles to five types of alcoholic vapor (ethanol, 1-propanol, 1-butanol, 1-pentanol, and 1-hexanol) were investigated and analyzed by differential and integral processing. The sensor-signal profiles largely depended on the types of N and MO as well as the amount of N loaded (m). The dynamic response arises from the flash catalytic combustion of the alcohols at 450 °C and their related components (partially oxidized and/or condensed products) adsorbed at 150 °C on the sensing film, and the 10Pt/10CeO2/γ-Al2O3 and 10Pd/10CeO2/γ-Al2O3 sensors showed the largest dynamic responses to 1000 ppm ethanol and 1-hexanol, respectively, among all the sensors tested. These sensors showed sufficiently large dynamic responses even to 10 ppm alcohols. The differential processing of their sensorsignal profiles was valuable in precisely finding slight changes and differences in their sensing behaviors and providing considerable information for data processing. [ABSTRACT FROM AUTHOR]

Background: Technologies for quick and label-free diagnosis of malignancies from breast tissues have the potential to be a significant adjunct to routine diagnostics. The biophysical phenotypes of breast tissues, such as its electrical, thermal, and mechanical properties (ETM), have the potential to serve as novel markers to differentiate between normal, benign, and malignant tissue. Results: We report a system-of-biochips (SoB) integrated into a semi-automated mechatronic system that can characterize breast biopsy tissues using electro-thermo-mechanical sensing. The SoB, fabricated on silicon using microfabrication techniques, can measure the electrical impedance (Z), thermal conductivity (K), mechanical stiffness (k), and viscoelastic stress relaxation (%R) of the samples. The key sensing elements of the biochips include interdigitated electrodes, resistance temperature detectors, microheaters, and a micromachined diaphragm with piezoresistive bridges. Multi-modal ETM measurements performed on formalin-fixed tumour and adjacent normal breast biopsy samples from N = 14 subjects were able to differentiate between invasive ductal carcinoma (malignant), fibroadenoma (benign), and adjacent normal (healthy) tissues with a root mean square error of 0.2419 using a Gaussian process classifier. Carcinoma tissues were observed to have the highest mean impedance (110018.8 ± 20293.8 Ω) and stiffness (0.076 ± 0.009 kNm−1) and the lowest thermal conductivity (0.189 ± 0.019 Wm−1 K−1) amongst the three groups, while the fibroadenoma samples had the highest percentage relaxation in normalized load (47.8 ± 5.12%). Conclusions: The work presents a novel strategy to characterize the multi-modal biophysical phenotype of breast biopsy tissues to aid in cancer diagnosis from small-sized tumour samples. The methodology envisions to supplement the existing technology gap in the analysis of breast tissue samples in the pathology laboratories to aid the diagnostic workflow. [ABSTRACT FROM AUTHOR]

With the development of smart grids and the energy internet, large-scale monitoring of voltage and electric field data is required in all aspects of power systems, which requires the arrangement of various advanced sensors. Measurement of the electric field can replace traditional voltage transformers to realize the non-contact measurement of voltage, which reduces the insulation cost and the difficulty of operation and maintenance. Electric field measurement can also be applied in various other areas, such as equipment fault diagnosis, lightning warning, and electromagnetic environment measurement. Traditional electric field measurement devices, such as field mills, are bulky and costly, so they cannot be arranged flexibly on a large scale. In this paper, we present an electrostatically actuated micro-electric field sensor (E-sensor) with a piezoresistive sensing structure. The presented E-sensor is fabricated into a four-cantilever structure using microfabrication technology. The cantilevers are displaced under the drive of the electrostatic force, and the generated strain is transformed into measurable signals through piezoresistive materials. The presented E-sensor has the advantages of small size, low cost, low power consumption, and easy mass production. Moreover, the E-sensor has a high signal-to-noise ratio, high resolution, and wide measuring range. The experimental results show that the E-sensor has a linear electric field measurement range from 1.1 to 1100.0 kV·m−1 with an alternating current (AC) resolution of up to 112 V·m−1·Hz−1/2 and a cut-off frequency of 496 Hz, making it suitable for most applications in smart grids and the energy internet.

The voltage, current, temperature, humidity, pressure, flow, and hydrogen in the high-pressure proton exchange membrane water electrolyzer (PEMWE) can influence its performance and life. For example, if the temperature is too low to reach the working temperature of the membrane electrode assembly (MEA), the performance of the high-pressure PEMWE cannot be enhanced. However, if the temperature is too high, the MEA may be damaged. In this study, the micro-electro-mechanical systems (MEMS) technology was used to innovate and develop a high-pressure-resistant flexible seven-in-one (voltage, current, temperature, humidity, pressure, flow, and hydrogen) microsensor. It was embedded in the upstream, midstream, and downstream of the anode and cathode of the high-pressure PEMWE and the MEA for the real-time microscopic monitoring of internal data. The aging or damage of the high-pressure PEMWE was observed through the changes in the voltage, current, humidity, and flow data. The over-etching phenomenon was likely to occur when this research team used wet etching to make microsensors. The back-end circuit integration was unlikely to be normalized. Therefore, this study used lift-off process to further stabilize the quality of the microsensor. In addition, the PEMWE is more prone to aging and damage under high pressure, so its material selection is very important. [ABSTRACT FROM AUTHOR]

Liquid biopsy is a rapidly emerging field that involves the minimal/non-invasive assessment of signature somatic mutations through the analysis of circulating tumor DNA (ctDNA) shed by tumor cells in bodily fluids. Broadly speaking, the unmet need in liquid biopsy lung cancer detection is the lack of a multiplex platform that can detect a mutation panel of lung cancer genes using a minimum amount of sample, especially for ultra-short ctDNA (usctDNA). Here, we developed a non-PCR and non-NGS-based single-droplet-based multiplexing microsensor technology, "Electric-Field-Induced Released and Measurement (EFIRM) Liquid Biopsy" (m-eLB), for lung cancer-associated usctDNA. The m-eLB provides a multiplexable assessment of usctDNA within a single droplet of biofluid in only one well of micro-electrodes, as each electrode is coated with different probes for the ctDNA. This m-eLB prototype demonstrates accuracy for three tyrosine-kinase-inhibitor-related EGFR target sequences in synthetic nucleotides. The accuracy of the multiplexing assay has an area under the curve (AUC) of 0.98 for L858R, 0.94 for Ex19 deletion, and 0.93 for T790M. In combination, the 3 EGFR assay has an AUC of 0.97 for the multiplexing assay. [ABSTRACT FROM AUTHOR]

ABSTRACT: Objectives: The aim of this review was to determine whether the type of removable appliance, as well as the age and sex of the patient, may affect the extension or reduction of wear time by assessing the correlation between the mean actual and orthodontist-recommended wear times. Methods: Randomised case control trials, cohort studies, case series, observational studies, reviews, and retrospective analyses were identified. The quality of the studies was assessed using the Cochrane Collaboration Tool and modified Newcastle-Ottawa Scale. The electronic databases Embase, PubMed, Scopus, and Web of Science were reviewed, and 542 articles were obtained, of which 31 were qualified for qualitative synthesis. The data from 1674 participants were collected and a weighted average was determined for the mean wear time of each appliance. Results: Regardless of the type of extra- or intraoral appliances, mean wear time was shorter than recommended, although patients using intraoral appliances cooperated more. The best compliance was noted for Schwarz appliances (73.70%) and plate retainers (85%). There was no evidence of an influence of patients’ age and sex on compliance during treatment. Conclusions: The considerable inconsistency and imprecision of articles could affect the reliability of the results. Previous studies analysing the effectiveness of treatment with removable appliances based on an arbitrarily assumed average wear time need to be revised in order to verify the actual wear time with the use of microsensors.

In this study, the integrated three-in-one (temperature, humidity, and wind speed) microsensor was made through the technology of the Micro-electro-mechanical Systems (MEMS) to measure three important physical quantities of the internal environment of the cold air pipe of the Heating, Ventilation and Air Conditioning (HVAC) in the factory, plan the installation positions of the integrated three-in-one microsensor and commercially available wind speed sensor required by the internal environment of the cold air pipe, and conduct the actual 310-h long term test and comparison. In the experiment, it was also observed that the self-made micro wind speed sensor had higher stability compared to the commercially available wind speed sensor (FS7.0.1L.195). The self-made micro wind speed sensor has a variation range of ±200 mm/s, while the commercially available wind speed sensor a variation range of ±1000 mm/s. The commercially available wind speed sensor (FS7.0.1L.195) can only measure the wind speed; however, the self-made integrated three-in-one microsensor can conduct real-time measurements of temperature and humidity according to the environment at that time, and use different calibration curves to know the wind speed. As a result, it is more accurate and less costly than commercially available wind speed sensors. The material cost of self-made integrated three-in-one microsensor includes chemicals, equipment usage fees, and wires. In the future, factories may install a large number of self-made integrated three-in-one microsensors in place of commercially available wind speed sensors. Through real-time wireless measurements, the self-made integrated three-in-one microsensors can achieve the control optimization of the HVAC cold air pipe's internal environment to improve the quality of manufactured materials. [ABSTRACT FROM AUTHOR]

Introduction Removable retainers have been successfully used for many years as an independent or additional form of retention in patients after orthodontic treatment. Unfortunately, it has been proven that most patients do not follow the orthodontist's recommendations and do not use the braces for the number of hours necessary to stabilize the treatment effects. It has therefore become necessary to look for solutions and devices that are able to objectively record the actual time of retainers use. Aim of the study The aim of the study was to assess the usefulness of electronic microsensors in monitoring wear time of removable retainers. Materials and methods A search was conducted using PubMed, Google Scholar, ResearchGate databases. Articles were searched in English using the following key words: “microsensors”, “retention”, “orthodontic”, “TheraMon”, “Smart Retainer”. Results The results of the literature review show that microsensors embedded in the elements of removable retainers are a valuable tool for monitoring the time of their use. Awareness of the presence of electronic sensors increases patient discipline. In addition, they provide data that, apart from objectively documenting the course of retention treatment, may be used in the future to determine optimal retention protocols. Conclusions The retention stage is an indispensable element of orthodontic treatment. The use of microsensors built into removable retainers can help to improve the stability of treatment results. However, further research and work are needed to improve the performance and reliability of this type of electronic sensors.

Many women diagnosed by traditional screening methods, such as palpation, mammography, and MRI, do not discover their cancer until it is relatively advanced. This makes treatment more difficult and reduces the chance of a cure. To deal with this issue, we have developed a noninvasive embedded thermography system that allows for an early detection of breast cancer. Indeed, the surface temperature distribution of the breast, which we will call the thermal image, can be used as a preventive indicator of the subsequent development of a cancerous tumor. This is due to the metabolic activity of the immune system, which induces, in the presence of cancer cells, a local increase of temperature even before the tumor tissue is differentiated and detectable by conventional imaging systems. The proposed system is designed as a network of bioheat microsensors applied to the breast, to measure periodically the temperature gradients on the surface. All the bioheat microsensors are addressed by a microcontroller via the I2C protocol. To calibrate and evaluate the proposed system, we have proposed an experimental model of the breast, inside which we have placed Joule effect heating elements. [ABSTRACT FROM AUTHOR]

The measurement of high electric field is widely used in applications such as power grid, electrical equipment, space launch, petroleum industry, and meteorological monitoring. Traditional electric field measurement methods, such as field mills, are bulky and cause electric field distortion. In this article, we presented a trampoline-shaped microelectric field sensor (E-sensor) based on microelectromechanical system (MEMS). The micro E-sensor uses the effect of electrostatic induction, which generates force that drives the vibration of a piezoresistive film and converts the electric field into a differential voltage signal. The presented E-sensor can measure both ac and dc high electric fields with relatively high resolution and wide range. Through experimental measurement, the device exhibits an ac resolution of 172 V/m/Hz1/2 and a linear measurable electric field range of 312 V/m to over 700 kV/m. The presented E-sensor has good performance with mm-level size and low cost, which could be mass produced for broad applications. [ABSTRACT FROM AUTHOR]

Metal-oxide (MOX) gas sensors commonly rely on custom packaging solution. With an ever-increasing demand for MOX gas sensors, there is a clear need for a low cost, compact and high-performance package. During normal operation, MOX sensors are heated up to a temperature in the typical range of 200-300°C. However, the generated heat must not damage or degrade any other part of the assembly. Using 3D finite elements modelling, we developed an optimal package configuration. To thermally insulate the assembly from the heated MOX sensor we have developed in-house a low thermal conductivity xerogel-epoxy composite with 22.7% by weight xerogel and a thermal conductivity of 107.9 mW m−1 K−1 which is a reduction exceeding 30% compared to commercially available epoxy. Based on the low thermal conductivity xerogel-epoxy composite, we have developed a novel packaging approach that can suit the large family of MOX sensors. The developed alternative packaging solution includes a small number of assembly steps and uses standard processes and techniques. The assembled MOX sensor is low cost and has a low power consumption, while all thermally sensitive assembly parts remain at low temperature during the system’s lifetime.

This paper presents a single-axis angular rate sensor that is robust to variations in its operating voltage and frequencies. The sensor is developed to overcome the shortcomings of conventional mode-matched Micromachined Vibratory Gyroscopes in open loop operations, namely narrow frequency bandwidths and unstable scale factors. The developed sensor utilizes inherent forcing and inertial nonlinearities from electrostatic forces and fabrication imperfections to auto-parametrically excite the sense mode via 2:1 auto-parametric resonance, which yields a broader bandwidth frequency response for the sensor's sense mode. The experimental results demonstrated − 3   dB frequency bandwidth of 500   Hz , a scale factor of 50   μ V / ° / s , and a dynamic range of ± 330 ° / s . [ABSTRACT FROM AUTHOR]

The demand for miniaturized point‐of‐care chemical/biochemical sensors has driven the development of field‐effect transistors (FETs) based pH sensors over the last 50 years. This paper aims to review the fabrication technologies, device structures, sensing film materials, and modeling techniques utilized for FET‐based pH sensors. We present the governing principles of potentiometric sensors, with major focus on the working principles of ion‐sensitive FETs (ISFETs). We extensively review different sensing film materials deposited by various techniques, which is critical to the sensing performance of ISFETs. The popular fabrication technologies have been presented, with special emphasis on state‐of‐the‐art silicon‐on‐insulator based technology, which can achieve high sensitivity by utilizing the dual‐gate effect. Furthermore, recent advancements in nano‐ISFETs has been elucidated. We also discuss the adoption of unmodified complementary metal‐oxide semiconductor (CMOS) ISFETs using standard CMOS processes, which has enabled the fabrication of integrated ISFET arrays, which are especially suited for ion‐imaging applications. Moreover, recent developments in extended‐gate FETs has been discussed, which have gained lot of attention due to their design flexibility and ease of fabrication, which is desirable for wearable sensing applications. In addition, recently there have been efforts to utilize nonsilicon channel materials for pH‐sensing application to obtain superior performance and various channel materials have been reviewed. Finally, we have extensively reviewed the ISFET device modeling and simulation techniques using various computer‐aided design tools, which aid in sensor design and characterization. [ABSTRACT FROM AUTHOR]