Search

Like many western boundary currents, the East Australian Current extension is projected to get stronger and warmer in the future. The CMIP5 multi‐model mean (MMM) projection suggests up to 5°C of warming under an RCP85 scenario by 2100. Previous studies employed Sverdrup balance to associate a trend in basin wide zonally integrated wind stress curl (resulting from the multi‐decadal poleward intensification in the westerly winds over the Southern Ocean) with enhanced transport in the EAC extension. Possible regional drivers are yet to be considered. Here, we introduce the NEMO‐OASIS‐WRF coupled regional climate model as a framework to improve our understanding of CMIP5 projections. We analyse a hierarchy of simulations in which the regional atmosphere and ocean circulations are allowed to freely evolve subject to boundary conditions that represent present day and CMIP5 RCP8.5 climate change anomalies. Evaluation of the historical simulation shows an EAC extension that is stronger than similar ocean‐only models and observations. This bias is not explained by a linear response to differences in wind stress. The climate change simulations show that regional atmospheric CMIP5 MMM anomalies drive 73% of the projected 12 Sv increase in EAC extension transport whereas the remote ocean boundary conditions and regional radiative forcing (greenhouse gases within the domain) play a smaller role. The importance of regional changes in wind stress curl in driving the enhanced EAC extension is consistent with linear theory where the NEMO‐OASIS‐WRF response is closer to linear transport estimates compared to the CMIP5 MMM.

Several sets of reference regions have been used in the literature for the regional synthesis of observed and modelled climate and climate change information. A popular example is the series of reference regions used in the Intergovernmental Panel on Climate Change (IPCC) Special Report on Managing the Risks of Extreme Events and Disasters to Advance Climate Adaptation (SREX). The SREX regions were slightly modified for the Fifth Assessment Report of the IPCC and used for reporting subcontinental observed and projected changes over a reduced number (33) of climatologically consistent regions encompassing a representative number of grid boxes. These regions are intended to allow analysis of atmospheric data over broad land or ocean regions and have been used as the basis for several popular spatially aggregated datasets, such as the Seasonal Mean Temperature and Precipitation in IPCC Regions for CMIP5 dataset. We present an updated version of the reference regions for the analysis of new observed and simulated datasets (including CMIP6) which offer an opportunity for refinement due to the higher atmospheric model resolution. As a result, the number of land and ocean regions is increased to 46 and 15, respectively, better representing consistent regional climate features. The paper describes the rationale for the definition of the new regions and analyses their homogeneity. The regions are defined as polygons and are provided as coordinates and a shapefile together with companion R and Python notebooks to illustrate their use in practical problems (e.g. calculating regional averages). We also describe the generation of a new dataset with monthly temperature and precipitation, spatially aggregated in the new regions, currently for CMIP5 and CMIP6, to be extended to other datasets in the future (including observations). The use of these reference regions, dataset and code is illustrated through a worked example using scatter plots to offer guidance on the likely range o

This study evaluates the added value in the representation of surface climate variables from an ensemble of regional climate model (RCM) simulations by comparing the relative skill of the RCM simulations and their driving data over a wide range of RCM experimental setups and climate statistics. The methodology is specifically designed to compare results across different variables and metrics, and it incorporates a rigorous approach to separate the added value occurring at different spatial scales. Results show that the RCMs’ added value strongly depends on the type of driving data, the climate variable, and the region of interest but depends rather weakly on the choice of the statistical measure, the season, and the RCM physical configuration. Decomposing climate statistics according to different spatial scales shows that improvements are coming from the small scales when considering the representation of spatial patterns, but from the large-scale contribution in the case of absolute values. Our results also show that a large part of the added value can be attained using some simple postprocessing methods.

Regional Climate Models (RCMs) have been developed in the last two decades in order to produce high-resolution climate information by downscaling Atmosphere-Ocean General Circulation Models (AOGCMs) simulations or analyses of observed data. A crucial evaluation of RCMs worth is given by the assessment of the value added compared to the driving data. This evaluation is usually very complex due to the manifold circumstances that can preclude a fair assessment. In order to circumvent these issues, here we limit ourselves to estimating the potential of RCMs to add value over coarse-resolution data. We do this by quantifying the importance of fine-scale RCM-resolved features in the near-surface temperature, but disregarding their skill. The Reynolds decomposition technique is used to separate the variance of the time-varying RCM-simulated temperature field according to the contribution of large and small spatial scales and of stationary and transient processes. The temperature variance is then approximated by the contribution of four terms, two of them associated with coarse-scales (e.g., corresponding to the scales that can be simulated by AOGCMs) and two of them describing the original contribution of RCM simulations. Results show that the potential added value (PAV) emerges almost exclusively in regions characterised by important surface forcings either due to the presence of fine-scale topography or land-water contrasts. Moreover, some of the processes leading to small-scale variability appear to be related with relatively simple mechanisms such as the distinct physical properties of the Earth surface and the general variation of temperature with altitude in the Earth atmosphere. Finally, the article includes some results of the application of the PAV framework to the future temperature change signal due to anthropogenic greenhouse gasses. Here, contrary to previous studies centred on precipitation, findings suggest for surface temperature a relatively low potential

In recent decades, the need of future climate information at local scales have pushed the climate modelling community to perform increasingly higher resolution simulations and to develop alternative approaches to obtain fine-scale climatic information. In this article, various nested regional climate model (RCM) simulations have been used to try to identify regions across North America where high-resolution downscaling generates fine-scale details in the climate projection derived using the “delta method”. Two necessary conditions were identified for an RCM to produce added value (AV) over lower resolution atmosphere-ocean general circulation models in the fine-scale component of the climate change (CC) signal. First, the RCM-derived CC signal must contain some non-negligible fine-scale information—independently of the RCM ability to produce AV in the present climate. Second, the uncertainty related with the estimation of this fine-scale information should be relatively small compared with the information itself in order to suggest that RCMs are able to simulate robust fine-scale features in the CC signal. Clearly, considering necessary (but not sufficient) conditions means that we are studying the “potential” of RCMs to add value instead of the AV, which preempts and avoids any discussion of the actual skill and hence the need for hindcast comparisons. The analysis concentrates on the CC signal obtained from the seasonal-averaged temperature and precipitation fields and shows that the fine-scale variability of the CC signal is generally small compared to its large-scale component, suggesting that little AV can be expected for the time-averaged fields. For the temperature variable, the largest potential for fine-scale added value appears in coastal regions mainly related with differential warming in land and oceanic surfaces. Fine-scale features can account for nearly 60 % of the total CC signal in some coastal regions although for most regions the fine scale contri

Regional Climate Models (RCMs) constitute the most often used method to perform affordable high-resolution regional climate simulations. The key issue in the evaluation of nested regional models is to determine whether RCM simulations improve the representation of climatic statistics compared to the driving data, that is, whether RCMs add value. In this study we examine a necessary condition that some climate statistics derived from the precipitation field must satisfy in order that the RCM technique can generate some added value: we focus on whether the climate statistics of interest contain some fine spatial-scale variability that would be absent on a coarser grid. The presence and magnitude of fine-scale precipitation variance required to adequately describe a given climate statistics will then be used to quantify the potential added value (PAV) of RCMs. Our results show that the PAV of RCMs is much higher for short temporal scales (e.g., 3-hourly data) than for long temporal scales (16-day average data) due to the filtering resulting from the time-averaging process. PAV is higher in warm season compared to cold season due to the higher proportion of precipitation falling from small-scale weather systems in the warm season. In regions of complex topography, the orographic forcing induces an extra component of PAV, no matter the season or the temporal scale considered. The PAV is also estimated using high-resolution datasets based on observations allowing the evaluation of the sensitivity of changing resolution in the real climate system. The results show that RCMs tend to reproduce relatively well the PAV compared to observations although showing an overestimation of the PAV in warm season and mountainous regions.

La modélisation du climat à haute résolution est nécessaire aux études d'impact du climat et, de nos jours, les modèles de circulation générale (MCG) n'ont pas encore une résolution suffisante pour satisfaire ces besoins. Les modèles régionaux du climat (MRC) ont été développés dans le but de fournir des détails sur le climat à fine échelle sur des régions spécifiques de la Terre. Les MRC ont démontré leur capacité à produire de la variabilité spatiale à petite échelle qui manque dans les simulations de MCG ; pour cette raison, les MRC sont de plus en plus utilisés dans les études sur le climat actuel et futur. Malgré ce succès, les avantages découlant de la production d'une variabilité climatique de fine échelle - autres que l'effet visuel saisissant des animations réalistes - ont rarement été clairement identifiés. Les tentatives pour quantifier ces avantages, généralement désignés comme étant la valeur ajoutée (VA) des MRC, ont été relativement rares et ont prouvé que la question de la VA est très complexe. Compte tenu de cette complexité, ce projet se concentre sur un aspect particulier de cette question : l'étude des conditions préalables que doivent satisfaire certaines statistiques climatiques pour permettre aux MRC d'ajouter de la valeur aux données utilisées comme pilote. Ces conditions sont basées sur l'idée que la VA des MRC ne peut survenir que si les statistiques climatiques d'intérêt contiennent de l'information à fine échelle qui n'est pas négligeable. Des données observées et simulées par des MRC peuvent ensuite être utilisées pour quantifier l'influence relative des fines échelles dans les statistiques climatiques, comme un proxy, pour estimer la valeur ajoutée potentielle (VAP) des MRC. Deux méthodes différentes ont été utilisées pour étudier la VAP sur l'Amérique du Nord, respectivement pour la température de surface et la précipitation. Les deux méthodes comprennent 3 étapes : l'utilisation d'une technique de décomposition pour séparer les variab

In recent decades, the need of future climate information at local scales have pushed the climate modelling community to perform increasingly higher resolution simulations and to develop alternative approaches to obtain fine-scale climatic information. In this article, various nested regional climate model (RCM) simulations have been used to try to identify regions across North America where high-resolution downscaling generates fine-scale details in the climate projection derived using the “delta method”. Two necessary conditions were identified for an RCM to produce added value (AV) over lower resolution atmosphere-ocean general circulation models in the fine-scale component of the climate change (CC) signal. First, the RCM-derived CC signal must contain some non-negligible fine-scale information—independently of the RCM ability to produce AV in the present climate. Second, the uncertainty related with the estimation of this fine-scale information should be relatively small compared with the information itself in order to suggest that RCMs are able to simulate robust fine-scale features in the CC signal. Clearly, considering necessary (but not sufficient) conditions means that we are studying the “potential” of RCMs to add value instead of the AV, which preempts and avoids any discussion of the actual skill and hence the need for hindcast comparisons. The analysis concentrates on the CC signal obtained from the seasonal-averaged temperature and precipitation fields and shows that the fine-scale variability of the CC signal is generally small compared to its large-scale component, suggesting that little AV can be expected for the time-averaged fields. For the temperature variable, the largest potential for fine-scale added value appears in coastal regions mainly related with differential warming in land and oceanic surfaces. Fine-scale features can account for nearly 60 % of the total CC signal in some coastal regions although for most regions the fine scale contri

Regional Climate Models (RCMs) have been developed in the last two decades in order to produce high-resolution climate information by downscaling Atmosphere-Ocean General Circulation Models (AOGCMs) simulations or analyses of observed data. A crucial evaluation of RCMs worth is given by the assessment of the value added compared to the driving data. This evaluation is usually very complex due to the manifold circumstances that can preclude a fair assessment. In order to circumvent these issues, here we limit ourselves to estimating the potential of RCMs to add value over coarse-resolution data. We do this by quantifying the importance of fine-scale RCM-resolved features in the near-surface temperature, but disregarding their skill. The Reynolds decomposition technique is used to separate the variance of the time-varying RCM-simulated temperature field according to the contribution of large and small spatial scales and of stationary and transient processes. The temperature variance is then approximated by the contribution of four terms, two of them associated with coarse-scales (e.g., corresponding to the scales that can be simulated by AOGCMs) and two of them describing the original contribution of RCM simulations. Results show that the potential added value (PAV) emerges almost exclusively in regions characterised by important surface forcings either due to the presence of fine-scale topography or land-water contrasts. Moreover, some of the processes leading to small-scale variability appear to be related with relatively simple mechanisms such as the distinct physical properties of the Earth surface and the general variation of temperature with altitude in the Earth atmosphere. Finally, the article includes some results of the application of the PAV framework to the future temperature change signal due to anthropogenic greenhouse gasses. Here, contrary to previous studies centred on precipitation, findings suggest for surface temperature a relatively low potential

Regional Climate Models (RCMs) constitute the most often used method to perform affordable high-resolution regional climate simulations. The key issue in the evaluation of nested regional models is to determine whether RCM simulations improve the representation of climatic statistics compared to the driving data, that is, whether RCMs add value. In this study we examine a necessary condition that some climate statistics derived from the precipitation field must satisfy in order that the RCM technique can generate some added value: we focus on whether the climate statistics of interest contain some fine spatial-scale variability that would be absent on a coarser grid. The presence and magnitude of fine-scale precipitation variance required to adequately describe a given climate statistics will then be used to quantify the potential added value (PAV) of RCMs. Our results show that the PAV of RCMs is much higher for short temporal scales (e.g., 3-hourly data) than for long temporal scales (16-day average data) due to the filtering resulting from the time-averaging process. PAV is higher in warm season compared to cold season due to the higher proportion of precipitation falling from small-scale weather systems in the warm season. In regions of complex topography, the orographic forcing induces an extra component of PAV, no matter the season or the temporal scale considered. The PAV is also estimated using high-resolution datasets based on observations allowing the evaluation of the sensitivity of changing resolution in the real climate system. The results show that RCMs tend to reproduce relatively well the PAV compared to observations although showing an overestimation of the PAV in warm season and mountainous regions.

This study evaluates the added value in the representation of surface climate variables from an ensemble of regional climate model (RCM) simulations by comparing the relative skill of the RCM simulations and their driving data over a wide range of RCM experimental setups and climate statistics. The methodology is specifically designed to compare results across different variables and metrics, and it incorporates a rigorous approach to separate the added value occurring at different spatial scales. Results show that the RCMs’ added value strongly depends on the type of driving data, the climate variable, and the region of interest but depends rather weakly on the choice of the statistical measure, the season, and the RCM physical configuration. Decomposing climate statistics according to different spatial scales shows that improvements are coming from the small scales when considering the representation of spatial patterns, but from the large-scale contribution in the case of absolute values. Our results also show that a large part of the added value can be attained using some simple postprocessing methods.