Search

Computer-aided design-computer-aided manufacturing (CAD-CAM) systems have been widely used as a fabrication method for restorations because of their high efficiency and accuracy, which significantly reduces fabrication time. However, molars with insufficient clearance or short clinical crown lengths require retention holes or grooves on the preparation, making it difficult to replicate the shapes with the CAM milling system. In these cases, restorations using the lost-wax method are selected. This article focuses on one-piece endodontic crowns (endocrowns) fabricated with a CAD-CAM system (CAD-CAM endocrowns), in which their posts and crowns are integrated. Articles from July 2012 to August 2023 were searched in PubMed with the keyword ''endocrown''. This review discusses the application of CAD-CAM endocrowns to molars from the viewpoint of model experiment (fracture resistance, adaptation) and clinical research. This technique, which allows margins and internal gaps to be set within the clinically acceptable range, is reported to be an effective way of restoring molars with high survival rates in clinical research.

Background/purpose: Bone resorption inhibitors, such as bisphosphonates (BPs) and anti-receptor activator of nuclear factor kappa B ligand antibodies (denosumab; Dmab), are used to treat osteoporosis and effectively reduce the risk of fracture. However, medication-related osteonecrosis of the jaw (MRONJ) has been reported as a rare adverse effect. Invasive tooth extraction procedures are reportedly a factor in the development of MRONJ. In this study, we aimed to retrospectively observe and clinically examine the effect of medication status on MRONJ development after tooth extraction in patients receiving drug treatment for osteoporosis. Materials and methods: This study was conducted among patients who visited our hospital between December 2015 and December 2021. We collected and analyzed the medical information of patients who underwent dental extractions while using osteoporosis medications, including oral and injectable BPs and Dmab. Results: Among antiresorptive medication users, 40 patients (70 teeth) underwent extraction. The mean duration of BP/Dmab use was 40.4 months, and the mean duration of drug holiday was 6.9 months. MRONJ after tooth extraction was not seen in BP users, but we observed two cases in Dmab users. A significant difference in MRONJ development was confirmed with the use of injectable compared with oral medication administration (odds ratio＝5.01). Conclusion: The use of injectable bone resorption inhibitors was associated with a higher risk of developing MRONJ. The route of administration, duration of medication, and withdrawal period should be carefully considered to prevent MRONJ after tooth extraction.

Abstract Background The pathophysiology and pathology of peri-implantitis remain unclear; however, its similarity to periodontitis has been described. The evaluation of peri-implant tissue and the diagnostic criteria of peri-implant disease are not currently standardized as they are for periodontitis. In this study, we evaluated clinical parameters during the implant maintenance period to determine significant correlations between these parameters. Methods We examined 55 implant patients at the time of maintenance visits between April and September 2016 and classified patients into a healthy group (H) and a history-of-periodontitis group (HP). For each implant, we evaluated the modified plaque index, probing pocket depth, and bleeding on probing as clinical parameters. Statistical analyses were performed with Spearman’s rank correlation coefficient. Results A total of 130 implants were assessed. The mean time since implant placement was 6 years and 6 months. The prevalence of implant-based peri-implantitis was 10.8% of all the implants. All cases of implant-based peri-implantitis came from the HP group, and many were present in patients with a history of severe periodontitis. The probing pocket depth around the implant was significantly greater in the HP group than in the H group. We found weak positive correlations between the probing pocket depth and bleeding on probing (r s = 0.401, p

Purpose: To investigate the changes in the enamel bond performance of a two-step adhesive containing a primer derived from a universal adhesive in the early phase before 24 h and compare them to those of other adhesives. The Knoop hardness number (KHN) of the cured adhesive layers and resin composite was measured. Materials and Methods: A new two-step adhesive using universal adhesive technology, G2-Bond Universal, was tested. Two conventional two-step adhesives, Clearfil SE Bond 2 and OptiBond eXTRa, and an established universal adhesive, Scotchbond Universal Plus Adhesive, were used as comparison materials. Twelve specimens per group were used to measure the shear bond strength (SBS) to bovine enamel in different etching modes. The bonded specimens were stored in distilled water at 37°C for 5 min or 1, 6, 12, or 24 h before SBS testing. The KHN of the adhesive layer and resin composite was determined after the same storage periods as for SBS testing. Results: All adhesives exhibited increased SBS with prolonged storage periods, irrespective of the etching mode. The KHN of the adhesive layer and resin composite increased over time. Conclusions: There were strong positive correlations between the SBS and KHN of the adhesive layer and resin composite. Phosphoric acid pre-etching of enamel effectively increases enamel bond performance. The two-step adhesive G2-Bond Universal demonstrated significantly higher bond strength in the early phase than the other adhesives in self-etch mode. [ABSTRACT FROM AUTHOR]

Purpose: Medication-related osteonecrosis of the jaw (MRONJ) is characterized by necrosis of the jawbone with intraoral bacterial infection and has a significant negative impact on oral health-related quality of life. Risk factors for the onset are unknown, and definitive therapeutic approaches have not yet been defined. A case-control study at a single institution in Mishima City was conducted. The purpose of this study was to examine in detail the factors that contribute to the development of MRONJ. Methods: Medical records of MRONJ patients who visited Mishima Dental Center, Nihon University School of Dentistry, during the period 2015-2021 were extracted. Counter-matched sampling design was used to select participants matched for sex, age, and smoking for this nested casecontrol study. The incidence factors were statistically examined by logistic regression analysis. Results: Twelve MRONJ patients were used as cases and 32 controls were matched. After adjustment for potential confounders, injectable bisphosphonates (aOR = 24.5; 95% CI = 1.05, 575.0; P < 0.05) were significantly associated with the development of MRONJ. Conclusion: High-dose bisphosphonates may be a risk factor for the development of MRONJ. Patients who use these products require careful prophylactic dental treatment against inflammatory diseases, and dentists and physicians should maintain close communication. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the influence of polymerization methods and a metal priming agent on the bond strength between gold alloy for metal ceramic restorations and dual-cure-type resin luting agents, and on the strength and hardness of the luting agents.Methods: A total of 154 disks cast by a gold alloy were treated with or without a metal priming agent. One of the three luting agents was applied on the disk. The luting agent was either chemically or dual-polymerized. The shear bond strength was measured both before and after thermocycling. In addition, scanning electron microscope (SEM) observation, flexural strength test, and Knoop hardness test were performed.Results: Significant differences among the luting agents were observed in terms of bond strength and flexural strength. Significant differences between chemically and dual-polymerized luting agents were observed regarding shear bond strength, flexural strength, and Knoop hardness before thermocycling. The application of the priming agent was effective only for a luting agent.Conclusion: Both bond strength and flexural strength differed among three luting agents. The effect of the priming agent on bond strength differed among the luting agents. Both the bond and flexural strength of a chemically polymerized luting agent differed before or after thermocycling. [ABSTRACT FROM AUTHOR]

Cast titanium restoration for molars has high biocompatibility and is covered by the Japanese national health insurance. Titanium casting requires specific investment material and casting apparatus. A cast restoration for the mandibular left second molar was fabricated using titanium in this study. A wax pattern fabricated on a definitive cast was invested in calcium aluminate-bonded magnesia investment material. Titanium was cast using an argon gas pressure one-chamber casting apparatus. No defects were observed on the surface and the hole was clearly reproduced. A smooth surface on the restoration was obtained by polishing at low speed. Reproductivity and polishing properties of the titanium restoration fabricated in this study were comparable to those of conventional dental metal restorations. [ABSTRACT FROM AUTHOR]

The outbreak of novel coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has spread worldwide. Nasopharyngeal swabs are widely used in polymerase chain reaction (PCR) test to detect SARS-CoV-2. However, the collection of nasopharyngeal swabs has a series of drawbacks concerning exposure of healthcare staff, difficulty in collection, and discomfort of patients. Therefore, an alternative noninvasive sample for diagnostic of emerging viral diseases is required. The usefulness of saliva screening tests is compared to conventional swab tests in this report. The results suggest that saliva could be a reliable sample for detecting SARS-CoV-2. [ABSTRACT FROM AUTHOR]